diff --git a/include/polarssl/bignum.h b/include/polarssl/bignum.h
index e02db3f..afa9e61 100644
--- a/include/polarssl/bignum.h
+++ b/include/polarssl/bignum.h
@@ -3,7 +3,7 @@
  *
  * \brief  Multi-precision integer library
  *
- *  Copyright (C) 2006-2010, Brainspark B.V.
+ *  Copyright (C) 2006-2013, Brainspark B.V.
  *
  *  This file is part of PolarSSL (http://www.polarssl.org)
  *  Lead Maintainer: Paul Bakker <polarssl_maintainer at polarssl.org>
@@ -65,6 +65,7 @@
  */
 #define POLARSSL_MPI_MAX_LIMBS                             10000
 
+#if !defined(POLARSSL_CONFIG_OPTIONS)
 /*
  * Maximum window size used for modular exponentiation. Default: 6
  * Minimum value: 1. Maximum value: 6.
@@ -84,6 +85,9 @@
  * of limbs required (POLARSSL_MPI_MAX_LIMBS) is higher.
  */
 #define POLARSSL_MPI_MAX_SIZE                              512      /**< Maximum number of bytes for usable MPIs. */
+
+#endif /* !POLARSSL_CONFIG_OPTIONS */
+
 #define POLARSSL_MPI_MAX_BITS                              ( 8 * POLARSSL_MPI_MAX_SIZE )    /**< Maximum number of bits for usable MPIs. */
 
 /*
diff --git a/include/polarssl/config.h b/include/polarssl/config.h
index d83437e..df81588 100644
--- a/include/polarssl/config.h
+++ b/include/polarssl/config.h
@@ -3,7 +3,7 @@
  *
  * \brief Configuration options (set of defines)
  *
- *  Copyright (C) 2006-2012, Brainspark B.V.
+ *  Copyright (C) 2006-2013, Brainspark B.V.
  *
  *  This file is part of PolarSSL (http://www.polarssl.org)
  *  Lead Maintainer: Paul Bakker <polarssl_maintainer at polarssl.org>
@@ -1164,6 +1164,59 @@
 
 /* \} name */
 
+/**
+ * \name SECTION: Module configuration options
+ *
+ * This section allows for the setting of module specific sizes and
+ * configuration options. The default values are already present in the
+ * relevant header files and should suffice for the regular use cases.
+ * Our advice is to enable POLARSSL_CONFIG_OPTIONS and change values here
+ * only if you have a good reason and know the consequences.
+ *
+ * If POLARSSL_CONFIG_OPTIONS is undefined here the options in the module
+ * header file take precedence.
+ *
+ * Please check the respective header file for documentation on these
+ * parameters (to prevent duplicate documentation).
+ *
+ * Uncomment POLARSSL_CONFIG_OPTIONS to enable using the values defined here.
+ * \{
+ */
+//#define POLARSSL_CONFIG_OPTIONS   /**< Enable config.h module value configuration */
+
+#if defined(POLARSSL_CONFIG_OPTIONS)
+
+// MPI / BIGNUM options
+//
+#define POLARSSL_MPI_WINDOW_SIZE            6 /**< Maximum windows size used. */
+#define POLARSSL_MPI_MAX_SIZE             512 /**< Maximum number of bytes for usable MPIs. */
+
+// CTR_DRBG options
+//
+#define CTR_DRBG_ENTROPY_LEN               48 /**< Amount of entropy used per seed by default */
+#define CTR_DRBG_RESEED_INTERVAL        10000 /**< Interval before reseed is performed by default */
+#define CTR_DRBG_MAX_INPUT                256 /**< Maximum number of additional input bytes */
+#define CTR_DRBG_MAX_REQUEST             1024 /**< Maximum number of requested bytes per call */
+#define CTR_DRBG_MAX_SEED_INPUT           384 /**< Maximum size of (re)seed buffer */
+
+// Entropy options
+//
+#define ENTROPY_MAX_SOURCES                20 /**< Maximum number of sources supported */
+#define ENTROPY_MAX_GATHER                128 /**< Maximum amount requested from entropy sources */
+
+// SSL Cache options
+//
+#define SSL_CACHE_DEFAULT_TIMEOUT       86400 /**< 1 day  */
+#define SSL_CACHE_DEFAULT_MAX_ENTRIES      50 /**< Maximum entries in cache */
+
+// SSL options
+//
+#define SSL_MAX_CONTENT_LEN             16384 /**< Size of the input / output buffer */
+
+#endif /* POLARSSL_CONFIG_OPTIONS */
+
+/* \} name */
+
 /*
  * Sanity checks on defines and dependencies
  */
diff --git a/include/polarssl/ctr_drbg.h b/include/polarssl/ctr_drbg.h
index 83861a9..5a26cde 100644
--- a/include/polarssl/ctr_drbg.h
+++ b/include/polarssl/ctr_drbg.h
@@ -3,7 +3,7 @@
  *
  * \brief CTR_DRBG based on AES-256 (NIST SP 800-90)
  *
- *  Copyright (C) 2006-2010, Brainspark B.V.
+ *  Copyright (C) 2006-2013, Brainspark B.V.
  *
  *  This file is part of PolarSSL (http://www.polarssl.org)
  *  Lead Maintainer: Paul Bakker <polarssl_maintainer at polarssl.org>
@@ -41,11 +41,14 @@
 #define CTR_DRBG_KEYBITS            ( CTR_DRBG_KEYSIZE * 8 )
 #define CTR_DRBG_SEEDLEN            ( CTR_DRBG_KEYSIZE + CTR_DRBG_BLOCKSIZE )
                                             /**< The seed length (counter + AES key)            */
-#define CTR_DRBG_ENTROPY_LEN        48      /**< Amount of entropy used per seed by default     */
+
+#if !defined(POLARSSL_CONFIG_OPTIONS)
+#define CTR_DRBG_ENTROPY_LEN        48      /**< Amount of entropy used per seed by default */
 #define CTR_DRBG_RESEED_INTERVAL    10000   /**< Interval before reseed is performed by default */
-#define CTR_DRBG_MAX_INPUT          256     /**< Maximum number of additional input bytes       */
-#define CTR_DRBG_MAX_REQUEST        1024    /**< Maximum number of requested bytes per call     */
-#define CTR_DRBG_MAX_SEED_INPUT     384     /**< Maximum size of (re)seed buffer                */
+#define CTR_DRBG_MAX_INPUT          256     /**< Maximum number of additional input bytes */
+#define CTR_DRBG_MAX_REQUEST        1024    /**< Maximum number of requested bytes per call */
+#define CTR_DRBG_MAX_SEED_INPUT     384     /**< Maximum size of (re)seed buffer */
+#endif /* !POLARSSL_CONFIG_OPTIONS */
 
 #define CTR_DRBG_PR_OFF             0       /**< No prediction resistance       */
 #define CTR_DRBG_PR_ON              1       /**< Prediction resistance enabled  */
diff --git a/include/polarssl/entropy.h b/include/polarssl/entropy.h
index 53bce41..039f5cd 100644
--- a/include/polarssl/entropy.h
+++ b/include/polarssl/entropy.h
@@ -3,7 +3,7 @@
  *
  * \brief Entropy accumulator implementation
  *
- *  Copyright (C) 2006-2011, Brainspark B.V.
+ *  Copyright (C) 2006-2013, Brainspark B.V.
  *
  *  This file is part of PolarSSL (http://www.polarssl.org)
  *  Lead Maintainer: Paul Bakker <polarssl_maintainer at polarssl.org>
@@ -40,8 +40,11 @@
 #define POLARSSL_ERR_ENTROPY_MAX_SOURCES                   -0x003E  /**< No more sources can be added. */
 #define POLARSSL_ERR_ENTROPY_NO_SOURCES_DEFINED            -0x0040  /**< No sources have been added to poll. */
 
+#if !defined(POLARSSL_CONFIG_OPTIONS)
 #define ENTROPY_MAX_SOURCES     20      /**< Maximum number of sources supported */
 #define ENTROPY_MAX_GATHER      128     /**< Maximum amount requested from entropy sources */
+#endif /* !POLARSSL_CONFIG_OPTIONS  */
+
 #define ENTROPY_BLOCK_SIZE      64      /**< Block size of entropy accumulator (SHA-512) */
 
 #define ENTROPY_SOURCE_MANUAL   ENTROPY_MAX_SOURCES
diff --git a/include/polarssl/ssl.h b/include/polarssl/ssl.h
index 40f1673..3f93469 100644
--- a/include/polarssl/ssl.h
+++ b/include/polarssl/ssl.h
@@ -137,7 +137,16 @@
 #define SSL_LEGACY_ALLOW_RENEGOTIATION  1
 #define SSL_LEGACY_BREAK_HANDSHAKE      2
 
-#define SSL_MAX_CONTENT_LEN         16384
+/*
+ * Size of the input / output buffer.
+ * Note: the RFC defines the default size of SSL / TLS messages. If you
+ * change the value here, other clients / servers may not be able to
+ * communicate with you anymore. Only change this value if you control
+ * both sides of the connection and have it reduced at both sides!
+ */
+#if !defined(POLARSSL_CONFIG_OPTIONS)
+#define SSL_MAX_CONTENT_LEN         16384   /**< Size of the input / output buffer */
+#endif /* !POLARSSL_CONFIG_OPTIONS */
 
 /*
  * Allow an extra 512 bytes for the record header
diff --git a/include/polarssl/ssl_cache.h b/include/polarssl/ssl_cache.h
index 0b3d5cc..c47330d 100644
--- a/include/polarssl/ssl_cache.h
+++ b/include/polarssl/ssl_cache.h
@@ -3,7 +3,7 @@
  *
  * \brief SSL session cache implementation
  *
- *  Copyright (C) 2006-2012, Brainspark B.V.
+ *  Copyright (C) 2006-2013, Brainspark B.V.
  *
  *  This file is part of PolarSSL (http://www.polarssl.org)
  *  Lead Maintainer: Paul Bakker <polarssl_maintainer at polarssl.org>
@@ -29,8 +29,10 @@
 
 #include "ssl.h"
 
+#if !defined(POLARSSL_CONFIG_OPTIONS)
 #define SSL_CACHE_DEFAULT_TIMEOUT       86400   /*!< 1 day  */
 #define SSL_CACHE_DEFAULT_MAX_ENTRIES      50   /*!< Maximum entries in cache */
+#endif /* !POLARSSL_CONFIG_OPTIONS */
 
 #ifdef __cplusplus
 extern "C" {