diff --git a/library/error.c b/library/error.c
index 1656e62..200e579 100644
--- a/library/error.c
+++ b/library/error.c
@@ -213,419 +213,509 @@
 #endif
 
 
-typedef struct mbedtls_error
+const char * mbedtls_high_level_strerr( int error_code )
 {
-    int code;                   /* Error code. */
-    const char * description;   /* Error description. */
-} mbedtls_error_t;
+    const char *error_description = NULL;
 
-static mbedtls_error_t high_level_errors[] =
-{
+    switch( error_code )
+    {
 #if defined(MBEDTLS_CIPHER_C)
-    {.code = -(MBEDTLS_ERR_CIPHER_FEATURE_UNAVAILABLE), .description="CIPHER - The selected feature is not available"},
-    {.code = -(MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA), .description="CIPHER - Bad input parameters"},
-    {.code = -(MBEDTLS_ERR_CIPHER_ALLOC_FAILED), .description="CIPHER - Failed to allocate memory"},
-    {.code = -(MBEDTLS_ERR_CIPHER_INVALID_PADDING), .description="CIPHER - Input data contains invalid padding and is rejected"},
-    {.code = -(MBEDTLS_ERR_CIPHER_FULL_BLOCK_EXPECTED), .description="CIPHER - Decryption of block requires a full block"},
-    {.code = -(MBEDTLS_ERR_CIPHER_AUTH_FAILED), .description="CIPHER - Authentication failed (for AEAD modes)"},
-    {.code = -(MBEDTLS_ERR_CIPHER_INVALID_CONTEXT), .description="CIPHER - The context is invalid. For example, because it was freed"},
-    {.code = -(MBEDTLS_ERR_CIPHER_HW_ACCEL_FAILED), .description="CIPHER - Cipher hardware accelerator failed"},
+        case -(MBEDTLS_ERR_CIPHER_FEATURE_UNAVAILABLE):
+            error_description = "CIPHER - The selected feature is not available";
+            break;
+        case -(MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA):
+            error_description = "CIPHER - Bad input parameters";
+            break;
+        case -(MBEDTLS_ERR_CIPHER_ALLOC_FAILED):
+            error_description = "CIPHER - Failed to allocate memory";
+            break;
+        case -(MBEDTLS_ERR_CIPHER_INVALID_PADDING):
+            error_description = "CIPHER - Input data contains invalid padding and is rejected";
+            break;
+        case -(MBEDTLS_ERR_CIPHER_FULL_BLOCK_EXPECTED):
+            error_description = "CIPHER - Decryption of block requires a full block";
+            break;
+        case -(MBEDTLS_ERR_CIPHER_AUTH_FAILED):
+            error_description = "CIPHER - Authentication failed (for AEAD modes)";
+            break;
+        case -(MBEDTLS_ERR_CIPHER_INVALID_CONTEXT):
+            error_description = "CIPHER - The context is invalid. For example, because it was freed";
+            break;
+        case -(MBEDTLS_ERR_CIPHER_HW_ACCEL_FAILED):
+            error_description = "CIPHER - Cipher hardware accelerator failed";
+            break;
 #endif /* MBEDTLS_CIPHER_C */
 
 #if defined(MBEDTLS_DHM_C)
-    {.code = -(MBEDTLS_ERR_DHM_BAD_INPUT_DATA), .description="DHM - Bad input parameters"},
-    {.code = -(MBEDTLS_ERR_DHM_READ_PARAMS_FAILED), .description="DHM - Reading of the DHM parameters failed"},
-    {.code = -(MBEDTLS_ERR_DHM_MAKE_PARAMS_FAILED), .description="DHM - Making of the DHM parameters failed"},
-    {.code = -(MBEDTLS_ERR_DHM_READ_PUBLIC_FAILED), .description="DHM - Reading of the public values failed"},
-    {.code = -(MBEDTLS_ERR_DHM_MAKE_PUBLIC_FAILED), .description="DHM - Making of the public value failed"},
-    {.code = -(MBEDTLS_ERR_DHM_CALC_SECRET_FAILED), .description="DHM - Calculation of the DHM secret failed"},
-    {.code = -(MBEDTLS_ERR_DHM_INVALID_FORMAT), .description="DHM - The ASN.1 data is not formatted correctly"},
-    {.code = -(MBEDTLS_ERR_DHM_ALLOC_FAILED), .description="DHM - Allocation of memory failed"},
-    {.code = -(MBEDTLS_ERR_DHM_FILE_IO_ERROR), .description="DHM - Read or write of file failed"},
-    {.code = -(MBEDTLS_ERR_DHM_HW_ACCEL_FAILED), .description="DHM - DHM hardware accelerator failed"},
-    {.code = -(MBEDTLS_ERR_DHM_SET_GROUP_FAILED), .description="DHM - Setting the modulus and generator failed"},
+        case -(MBEDTLS_ERR_DHM_BAD_INPUT_DATA):
+            error_description = "DHM - Bad input parameters";
+            break;
+        case -(MBEDTLS_ERR_DHM_READ_PARAMS_FAILED):
+            error_description = "DHM - Reading of the DHM parameters failed";
+            break;
+        case -(MBEDTLS_ERR_DHM_MAKE_PARAMS_FAILED):
+            error_description = "DHM - Making of the DHM parameters failed";
+            break;
+        case -(MBEDTLS_ERR_DHM_READ_PUBLIC_FAILED):
+            error_description = "DHM - Reading of the public values failed";
+            break;
+        case -(MBEDTLS_ERR_DHM_MAKE_PUBLIC_FAILED):
+            error_description = "DHM - Making of the public value failed";
+            break;
+        case -(MBEDTLS_ERR_DHM_CALC_SECRET_FAILED):
+            error_description = "DHM - Calculation of the DHM secret failed";
+            break;
+        case -(MBEDTLS_ERR_DHM_INVALID_FORMAT):
+            error_description = "DHM - The ASN.1 data is not formatted correctly";
+            break;
+        case -(MBEDTLS_ERR_DHM_ALLOC_FAILED):
+            error_description = "DHM - Allocation of memory failed";
+            break;
+        case -(MBEDTLS_ERR_DHM_FILE_IO_ERROR):
+            error_description = "DHM - Read or write of file failed";
+            break;
+        case -(MBEDTLS_ERR_DHM_HW_ACCEL_FAILED):
+            error_description = "DHM - DHM hardware accelerator failed";
+            break;
+        case -(MBEDTLS_ERR_DHM_SET_GROUP_FAILED):
+            error_description = "DHM - Setting the modulus and generator failed";
+            break;
 #endif /* MBEDTLS_DHM_C */
 
 #if defined(MBEDTLS_ECP_C)
-    {.code = -(MBEDTLS_ERR_ECP_BAD_INPUT_DATA), .description="ECP - Bad input parameters to function"},
-    {.code = -(MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL), .description="ECP - The buffer is too small to write to"},
-    {.code = -(MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE), .description="ECP - The requested feature is not available, for example, the requested curve is not supported"},
-    {.code = -(MBEDTLS_ERR_ECP_VERIFY_FAILED), .description="ECP - The signature is not valid"},
-    {.code = -(MBEDTLS_ERR_ECP_ALLOC_FAILED), .description="ECP - Memory allocation failed"},
-    {.code = -(MBEDTLS_ERR_ECP_RANDOM_FAILED), .description="ECP - Generation of random value, such as ephemeral key, failed"},
-    {.code = -(MBEDTLS_ERR_ECP_INVALID_KEY), .description="ECP - Invalid private or public key"},
-    {.code = -(MBEDTLS_ERR_ECP_SIG_LEN_MISMATCH), .description="ECP - The buffer contains a valid signature followed by more data"},
-    {.code = -(MBEDTLS_ERR_ECP_HW_ACCEL_FAILED), .description="ECP - The ECP hardware accelerator failed"},
-    {.code = -(MBEDTLS_ERR_ECP_IN_PROGRESS), .description="ECP - Operation in progress, call again with the same parameters to continue"},
+        case -(MBEDTLS_ERR_ECP_BAD_INPUT_DATA):
+            error_description = "ECP - Bad input parameters to function";
+            break;
+        case -(MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL):
+            error_description = "ECP - The buffer is too small to write to";
+            break;
+        case -(MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE):
+            error_description = "ECP - The requested feature is not available, for example, the requested curve is not supported";
+            break;
+        case -(MBEDTLS_ERR_ECP_VERIFY_FAILED):
+            error_description = "ECP - The signature is not valid";
+            break;
+        case -(MBEDTLS_ERR_ECP_ALLOC_FAILED):
+            error_description = "ECP - Memory allocation failed";
+            break;
+        case -(MBEDTLS_ERR_ECP_RANDOM_FAILED):
+            error_description = "ECP - Generation of random value, such as ephemeral key, failed";
+            break;
+        case -(MBEDTLS_ERR_ECP_INVALID_KEY):
+            error_description = "ECP - Invalid private or public key";
+            break;
+        case -(MBEDTLS_ERR_ECP_SIG_LEN_MISMATCH):
+            error_description = "ECP - The buffer contains a valid signature followed by more data";
+            break;
+        case -(MBEDTLS_ERR_ECP_HW_ACCEL_FAILED):
+            error_description = "ECP - The ECP hardware accelerator failed";
+            break;
+        case -(MBEDTLS_ERR_ECP_IN_PROGRESS):
+            error_description = "ECP - Operation in progress, call again with the same parameters to continue";
+            break;
 #endif /* MBEDTLS_ECP_C */
 
 #if defined(MBEDTLS_MD_C)
-    {.code = -(MBEDTLS_ERR_MD_FEATURE_UNAVAILABLE), .description="MD - The selected feature is not available"},
-    {.code = -(MBEDTLS_ERR_MD_BAD_INPUT_DATA), .description="MD - Bad input parameters to function"},
-    {.code = -(MBEDTLS_ERR_MD_ALLOC_FAILED), .description="MD - Failed to allocate memory"},
-    {.code = -(MBEDTLS_ERR_MD_FILE_IO_ERROR), .description="MD - Opening or reading of file failed"},
-    {.code = -(MBEDTLS_ERR_MD_HW_ACCEL_FAILED), .description="MD - MD hardware accelerator failed"},
+        case -(MBEDTLS_ERR_MD_FEATURE_UNAVAILABLE):
+            error_description = "MD - The selected feature is not available";
+            break;
+        case -(MBEDTLS_ERR_MD_BAD_INPUT_DATA):
+            error_description = "MD - Bad input parameters to function";
+            break;
+        case -(MBEDTLS_ERR_MD_ALLOC_FAILED):
+            error_description = "MD - Failed to allocate memory";
+            break;
+        case -(MBEDTLS_ERR_MD_FILE_IO_ERROR):
+            error_description = "MD - Opening or reading of file failed";
+            break;
+        case -(MBEDTLS_ERR_MD_HW_ACCEL_FAILED):
+            error_description = "MD - MD hardware accelerator failed";
+            break;
 #endif /* MBEDTLS_MD_C */
 
 #if defined(MBEDTLS_PEM_PARSE_C) || defined(MBEDTLS_PEM_WRITE_C)
-    {.code = -(MBEDTLS_ERR_PEM_NO_HEADER_FOOTER_PRESENT), .description="PEM - No PEM header or footer found"},
-    {.code = -(MBEDTLS_ERR_PEM_INVALID_DATA), .description="PEM - PEM string is not as expected"},
-    {.code = -(MBEDTLS_ERR_PEM_ALLOC_FAILED), .description="PEM - Failed to allocate memory"},
-    {.code = -(MBEDTLS_ERR_PEM_INVALID_ENC_IV), .description="PEM - RSA IV is not in hex-format"},
-    {.code = -(MBEDTLS_ERR_PEM_UNKNOWN_ENC_ALG), .description="PEM - Unsupported key encryption algorithm"},
-    {.code = -(MBEDTLS_ERR_PEM_PASSWORD_REQUIRED), .description="PEM - Private key password can't be empty"},
-    {.code = -(MBEDTLS_ERR_PEM_PASSWORD_MISMATCH), .description="PEM - Given private key password does not allow for correct decryption"},
-    {.code = -(MBEDTLS_ERR_PEM_FEATURE_UNAVAILABLE), .description="PEM - Unavailable feature, e.g. hashing/encryption combination"},
-    {.code = -(MBEDTLS_ERR_PEM_BAD_INPUT_DATA), .description="PEM - Bad input parameters to function"},
+        case -(MBEDTLS_ERR_PEM_NO_HEADER_FOOTER_PRESENT):
+            error_description = "PEM - No PEM header or footer found";
+            break;
+        case -(MBEDTLS_ERR_PEM_INVALID_DATA):
+            error_description = "PEM - PEM string is not as expected";
+            break;
+        case -(MBEDTLS_ERR_PEM_ALLOC_FAILED):
+            error_description = "PEM - Failed to allocate memory";
+            break;
+        case -(MBEDTLS_ERR_PEM_INVALID_ENC_IV):
+            error_description = "PEM - RSA IV is not in hex-format";
+            break;
+        case -(MBEDTLS_ERR_PEM_UNKNOWN_ENC_ALG):
+            error_description = "PEM - Unsupported key encryption algorithm";
+            break;
+        case -(MBEDTLS_ERR_PEM_PASSWORD_REQUIRED):
+            error_description = "PEM - Private key password can't be empty";
+            break;
+        case -(MBEDTLS_ERR_PEM_PASSWORD_MISMATCH):
+            error_description = "PEM - Given private key password does not allow for correct decryption";
+            break;
+        case -(MBEDTLS_ERR_PEM_FEATURE_UNAVAILABLE):
+            error_description = "PEM - Unavailable feature, e.g. hashing/encryption combination";
+            break;
+        case -(MBEDTLS_ERR_PEM_BAD_INPUT_DATA):
+            error_description = "PEM - Bad input parameters to function";
+            break;
 #endif /* MBEDTLS_PEM_PARSE_C || MBEDTLS_PEM_WRITE_C */
 
 #if defined(MBEDTLS_PK_C)
-    {.code = -(MBEDTLS_ERR_PK_ALLOC_FAILED), .description="PK - Memory allocation failed"},
-    {.code = -(MBEDTLS_ERR_PK_TYPE_MISMATCH), .description="PK - Type mismatch, eg attempt to encrypt with an ECDSA key"},
-    {.code = -(MBEDTLS_ERR_PK_BAD_INPUT_DATA), .description="PK - Bad input parameters to function"},
-    {.code = -(MBEDTLS_ERR_PK_FILE_IO_ERROR), .description="PK - Read/write of file failed"},
-    {.code = -(MBEDTLS_ERR_PK_KEY_INVALID_VERSION), .description="PK - Unsupported key version"},
-    {.code = -(MBEDTLS_ERR_PK_KEY_INVALID_FORMAT), .description="PK - Invalid key tag or value"},
-    {.code = -(MBEDTLS_ERR_PK_UNKNOWN_PK_ALG), .description="PK - Key algorithm is unsupported (only RSA and EC are supported)"},
-    {.code = -(MBEDTLS_ERR_PK_PASSWORD_REQUIRED), .description="PK - Private key password can't be empty"},
-    {.code = -(MBEDTLS_ERR_PK_PASSWORD_MISMATCH), .description="PK - Given private key password does not allow for correct decryption"},
-    {.code = -(MBEDTLS_ERR_PK_INVALID_PUBKEY), .description="PK - The pubkey tag or value is invalid (only RSA and EC are supported)"},
-    {.code = -(MBEDTLS_ERR_PK_INVALID_ALG), .description="PK - The algorithm tag or value is invalid"},
-    {.code = -(MBEDTLS_ERR_PK_UNKNOWN_NAMED_CURVE), .description="PK - Elliptic curve is unsupported (only NIST curves are supported)"},
-    {.code = -(MBEDTLS_ERR_PK_FEATURE_UNAVAILABLE), .description="PK - Unavailable feature, e.g. RSA disabled for RSA key"},
-    {.code = -(MBEDTLS_ERR_PK_SIG_LEN_MISMATCH), .description="PK - The buffer contains a valid signature followed by more data"},
-    {.code = -(MBEDTLS_ERR_PK_HW_ACCEL_FAILED), .description="PK - PK hardware accelerator failed"},
+        case -(MBEDTLS_ERR_PK_ALLOC_FAILED):
+            error_description = "PK - Memory allocation failed";
+            break;
+        case -(MBEDTLS_ERR_PK_TYPE_MISMATCH):
+            error_description = "PK - Type mismatch, eg attempt to encrypt with an ECDSA key";
+            break;
+        case -(MBEDTLS_ERR_PK_BAD_INPUT_DATA):
+            error_description = "PK - Bad input parameters to function";
+            break;
+        case -(MBEDTLS_ERR_PK_FILE_IO_ERROR):
+            error_description = "PK - Read/write of file failed";
+            break;
+        case -(MBEDTLS_ERR_PK_KEY_INVALID_VERSION):
+            error_description = "PK - Unsupported key version";
+            break;
+        case -(MBEDTLS_ERR_PK_KEY_INVALID_FORMAT):
+            error_description = "PK - Invalid key tag or value";
+            break;
+        case -(MBEDTLS_ERR_PK_UNKNOWN_PK_ALG):
+            error_description = "PK - Key algorithm is unsupported (only RSA and EC are supported)";
+            break;
+        case -(MBEDTLS_ERR_PK_PASSWORD_REQUIRED):
+            error_description = "PK - Private key password can't be empty";
+            break;
+        case -(MBEDTLS_ERR_PK_PASSWORD_MISMATCH):
+            error_description = "PK - Given private key password does not allow for correct decryption";
+            break;
+        case -(MBEDTLS_ERR_PK_INVALID_PUBKEY):
+            error_description = "PK - The pubkey tag or value is invalid (only RSA and EC are supported)";
+            break;
+        case -(MBEDTLS_ERR_PK_INVALID_ALG):
+            error_description = "PK - The algorithm tag or value is invalid";
+            break;
+        case -(MBEDTLS_ERR_PK_UNKNOWN_NAMED_CURVE):
+            error_description = "PK - Elliptic curve is unsupported (only NIST curves are supported)";
+            break;
+        case -(MBEDTLS_ERR_PK_FEATURE_UNAVAILABLE):
+            error_description = "PK - Unavailable feature, e.g. RSA disabled for RSA key";
+            break;
+        case -(MBEDTLS_ERR_PK_SIG_LEN_MISMATCH):
+            error_description = "PK - The buffer contains a valid signature followed by more data";
+            break;
+        case -(MBEDTLS_ERR_PK_HW_ACCEL_FAILED):
+            error_description = "PK - PK hardware accelerator failed";
+            break;
 #endif /* MBEDTLS_PK_C */
 
 #if defined(MBEDTLS_PKCS12_C)
-    {.code = -(MBEDTLS_ERR_PKCS12_BAD_INPUT_DATA), .description="PKCS12 - Bad input parameters to function"},
-    {.code = -(MBEDTLS_ERR_PKCS12_FEATURE_UNAVAILABLE), .description="PKCS12 - Feature not available, e.g. unsupported encryption scheme"},
-    {.code = -(MBEDTLS_ERR_PKCS12_PBE_INVALID_FORMAT), .description="PKCS12 - PBE ASN.1 data not as expected"},
-    {.code = -(MBEDTLS_ERR_PKCS12_PASSWORD_MISMATCH), .description="PKCS12 - Given private key password does not allow for correct decryption"},
+        case -(MBEDTLS_ERR_PKCS12_BAD_INPUT_DATA):
+            error_description = "PKCS12 - Bad input parameters to function";
+            break;
+        case -(MBEDTLS_ERR_PKCS12_FEATURE_UNAVAILABLE):
+            error_description = "PKCS12 - Feature not available, e.g. unsupported encryption scheme";
+            break;
+        case -(MBEDTLS_ERR_PKCS12_PBE_INVALID_FORMAT):
+            error_description = "PKCS12 - PBE ASN.1 data not as expected";
+            break;
+        case -(MBEDTLS_ERR_PKCS12_PASSWORD_MISMATCH):
+            error_description = "PKCS12 - Given private key password does not allow for correct decryption";
+            break;
 #endif /* MBEDTLS_PKCS12_C */
 
 #if defined(MBEDTLS_PKCS5_C)
-    {.code = -(MBEDTLS_ERR_PKCS5_BAD_INPUT_DATA), .description="PKCS5 - Bad input parameters to function"},
-    {.code = -(MBEDTLS_ERR_PKCS5_INVALID_FORMAT), .description="PKCS5 - Unexpected ASN.1 data"},
-    {.code = -(MBEDTLS_ERR_PKCS5_FEATURE_UNAVAILABLE), .description="PKCS5 - Requested encryption or digest alg not available"},
-    {.code = -(MBEDTLS_ERR_PKCS5_PASSWORD_MISMATCH), .description="PKCS5 - Given private key password does not allow for correct decryption"},
+        case -(MBEDTLS_ERR_PKCS5_BAD_INPUT_DATA):
+            error_description = "PKCS5 - Bad input parameters to function";
+            break;
+        case -(MBEDTLS_ERR_PKCS5_INVALID_FORMAT):
+            error_description = "PKCS5 - Unexpected ASN.1 data";
+            break;
+        case -(MBEDTLS_ERR_PKCS5_FEATURE_UNAVAILABLE):
+            error_description = "PKCS5 - Requested encryption or digest alg not available";
+            break;
+        case -(MBEDTLS_ERR_PKCS5_PASSWORD_MISMATCH):
+            error_description = "PKCS5 - Given private key password does not allow for correct decryption";
+            break;
 #endif /* MBEDTLS_PKCS5_C */
 
 #if defined(MBEDTLS_RSA_C)
-    {.code = -(MBEDTLS_ERR_RSA_BAD_INPUT_DATA), .description="RSA - Bad input parameters to function"},
-    {.code = -(MBEDTLS_ERR_RSA_INVALID_PADDING), .description="RSA - Input data contains invalid padding and is rejected"},
-    {.code = -(MBEDTLS_ERR_RSA_KEY_GEN_FAILED), .description="RSA - Something failed during generation of a key"},
-    {.code = -(MBEDTLS_ERR_RSA_KEY_CHECK_FAILED), .description="RSA - Key failed to pass the validity check of the library"},
-    {.code = -(MBEDTLS_ERR_RSA_PUBLIC_FAILED), .description="RSA - The public key operation failed"},
-    {.code = -(MBEDTLS_ERR_RSA_PRIVATE_FAILED), .description="RSA - The private key operation failed"},
-    {.code = -(MBEDTLS_ERR_RSA_VERIFY_FAILED), .description="RSA - The PKCS#1 verification failed"},
-    {.code = -(MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE), .description="RSA - The output buffer for decryption is not large enough"},
-    {.code = -(MBEDTLS_ERR_RSA_RNG_FAILED), .description="RSA - The random generator failed to generate non-zeros"},
-    {.code = -(MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION), .description="RSA - The implementation does not offer the requested operation, for example, because of security violations or lack of functionality"},
-    {.code = -(MBEDTLS_ERR_RSA_HW_ACCEL_FAILED), .description="RSA - RSA hardware accelerator failed"},
+        case -(MBEDTLS_ERR_RSA_BAD_INPUT_DATA):
+            error_description = "RSA - Bad input parameters to function";
+            break;
+        case -(MBEDTLS_ERR_RSA_INVALID_PADDING):
+            error_description = "RSA - Input data contains invalid padding and is rejected";
+            break;
+        case -(MBEDTLS_ERR_RSA_KEY_GEN_FAILED):
+            error_description = "RSA - Something failed during generation of a key";
+            break;
+        case -(MBEDTLS_ERR_RSA_KEY_CHECK_FAILED):
+            error_description = "RSA - Key failed to pass the validity check of the library";
+            break;
+        case -(MBEDTLS_ERR_RSA_PUBLIC_FAILED):
+            error_description = "RSA - The public key operation failed";
+            break;
+        case -(MBEDTLS_ERR_RSA_PRIVATE_FAILED):
+            error_description = "RSA - The private key operation failed";
+            break;
+        case -(MBEDTLS_ERR_RSA_VERIFY_FAILED):
+            error_description = "RSA - The PKCS#1 verification failed";
+            break;
+        case -(MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE):
+            error_description = "RSA - The output buffer for decryption is not large enough";
+            break;
+        case -(MBEDTLS_ERR_RSA_RNG_FAILED):
+            error_description = "RSA - The random generator failed to generate non-zeros";
+            break;
+        case -(MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION):
+            error_description = "RSA - The implementation does not offer the requested operation, for example, because of security violations or lack of functionality";
+            break;
+        case -(MBEDTLS_ERR_RSA_HW_ACCEL_FAILED):
+            error_description = "RSA - RSA hardware accelerator failed";
+            break;
 #endif /* MBEDTLS_RSA_C */
 
 #if defined(MBEDTLS_SSL_TLS_C)
-    {.code = -(MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE), .description="SSL - The requested feature is not available"},
-    {.code = -(MBEDTLS_ERR_SSL_BAD_INPUT_DATA), .description="SSL - Bad input parameters to function"},
-    {.code = -(MBEDTLS_ERR_SSL_INVALID_MAC), .description="SSL - Verification of the message MAC failed"},
-    {.code = -(MBEDTLS_ERR_SSL_INVALID_RECORD), .description="SSL - An invalid SSL record was received"},
-    {.code = -(MBEDTLS_ERR_SSL_CONN_EOF), .description="SSL - The connection indicated an EOF"},
-    {.code = -(MBEDTLS_ERR_SSL_UNKNOWN_CIPHER), .description="SSL - An unknown cipher was received"},
-    {.code = -(MBEDTLS_ERR_SSL_NO_CIPHER_CHOSEN), .description="SSL - The server has no ciphersuites in common with the client"},
-    {.code = -(MBEDTLS_ERR_SSL_NO_RNG), .description="SSL - No RNG was provided to the SSL module"},
-    {.code = -(MBEDTLS_ERR_SSL_NO_CLIENT_CERTIFICATE), .description="SSL - No client certification received from the client, but required by the authentication mode"},
-    {.code = -(MBEDTLS_ERR_SSL_CERTIFICATE_TOO_LARGE), .description="SSL - Our own certificate(s) is/are too large to send in an SSL message"},
-    {.code = -(MBEDTLS_ERR_SSL_CERTIFICATE_REQUIRED), .description="SSL - The own certificate is not set, but needed by the server"},
-    {.code = -(MBEDTLS_ERR_SSL_PRIVATE_KEY_REQUIRED), .description="SSL - The own private key or pre-shared key is not set, but needed"},
-    {.code = -(MBEDTLS_ERR_SSL_CA_CHAIN_REQUIRED), .description="SSL - No CA Chain is set, but required to operate"},
-    {.code = -(MBEDTLS_ERR_SSL_UNEXPECTED_MESSAGE), .description="SSL - An unexpected message was received from our peer"},
-    {.code = -(MBEDTLS_ERR_SSL_FATAL_ALERT_MESSAGE), .description="SSL - A fatal alert message was received from our peer"},
-    {.code = -(MBEDTLS_ERR_SSL_PEER_VERIFY_FAILED), .description="SSL - Verification of our peer failed"},
-    {.code = -(MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY), .description="SSL - The peer notified us that the connection is going to be closed"},
-    {.code = -(MBEDTLS_ERR_SSL_BAD_HS_CLIENT_HELLO), .description="SSL - Processing of the ClientHello handshake message failed"},
-    {.code = -(MBEDTLS_ERR_SSL_BAD_HS_SERVER_HELLO), .description="SSL - Processing of the ServerHello handshake message failed"},
-    {.code = -(MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE), .description="SSL - Processing of the Certificate handshake message failed"},
-    {.code = -(MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE_REQUEST), .description="SSL - Processing of the CertificateRequest handshake message failed"},
-    {.code = -(MBEDTLS_ERR_SSL_BAD_HS_SERVER_KEY_EXCHANGE), .description="SSL - Processing of the ServerKeyExchange handshake message failed"},
-    {.code = -(MBEDTLS_ERR_SSL_BAD_HS_SERVER_HELLO_DONE), .description="SSL - Processing of the ServerHelloDone handshake message failed"},
-    {.code = -(MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE), .description="SSL - Processing of the ClientKeyExchange handshake message failed"},
-    {.code = -(MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE_RP), .description="SSL - Processing of the ClientKeyExchange handshake message failed in DHM / ECDH Read Public"},
-    {.code = -(MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE_CS), .description="SSL - Processing of the ClientKeyExchange handshake message failed in DHM / ECDH Calculate Secret"},
-    {.code = -(MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE_VERIFY), .description="SSL - Processing of the CertificateVerify handshake message failed"},
-    {.code = -(MBEDTLS_ERR_SSL_BAD_HS_CHANGE_CIPHER_SPEC), .description="SSL - Processing of the ChangeCipherSpec handshake message failed"},
-    {.code = -(MBEDTLS_ERR_SSL_BAD_HS_FINISHED), .description="SSL - Processing of the Finished handshake message failed"},
-    {.code = -(MBEDTLS_ERR_SSL_ALLOC_FAILED), .description="SSL - Memory allocation failed"},
-    {.code = -(MBEDTLS_ERR_SSL_HW_ACCEL_FAILED), .description="SSL - Hardware acceleration function returned with error"},
-    {.code = -(MBEDTLS_ERR_SSL_HW_ACCEL_FALLTHROUGH), .description="SSL - Hardware acceleration function skipped / left alone data"},
-    {.code = -(MBEDTLS_ERR_SSL_COMPRESSION_FAILED), .description="SSL - Processing of the compression / decompression failed"},
-    {.code = -(MBEDTLS_ERR_SSL_BAD_HS_PROTOCOL_VERSION), .description="SSL - Handshake protocol not within min/max boundaries"},
-    {.code = -(MBEDTLS_ERR_SSL_BAD_HS_NEW_SESSION_TICKET), .description="SSL - Processing of the NewSessionTicket handshake message failed"},
-    {.code = -(MBEDTLS_ERR_SSL_SESSION_TICKET_EXPIRED), .description="SSL - Session ticket has expired"},
-    {.code = -(MBEDTLS_ERR_SSL_PK_TYPE_MISMATCH), .description="SSL - Public key type mismatch (eg, asked for RSA key exchange and presented EC key)"},
-    {.code = -(MBEDTLS_ERR_SSL_UNKNOWN_IDENTITY), .description="SSL - Unknown identity received (eg, PSK identity)"},
-    {.code = -(MBEDTLS_ERR_SSL_INTERNAL_ERROR), .description="SSL - Internal error (eg, unexpected failure in lower-level module)"},
-    {.code = -(MBEDTLS_ERR_SSL_COUNTER_WRAPPING), .description="SSL - A counter would wrap (eg, too many messages exchanged)"},
-    {.code = -(MBEDTLS_ERR_SSL_WAITING_SERVER_HELLO_RENEGO), .description="SSL - Unexpected message at ServerHello in renegotiation"},
-    {.code = -(MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED), .description="SSL - DTLS client must retry for hello verification"},
-    {.code = -(MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL), .description="SSL - A buffer is too small to receive or write a message"},
-    {.code = -(MBEDTLS_ERR_SSL_NO_USABLE_CIPHERSUITE), .description="SSL - None of the common ciphersuites is usable (eg, no suitable certificate, see debug messages)"},
-    {.code = -(MBEDTLS_ERR_SSL_WANT_READ), .description="SSL - No data of requested type currently available on underlying transport"},
-    {.code = -(MBEDTLS_ERR_SSL_WANT_WRITE), .description="SSL - Connection requires a write call"},
-    {.code = -(MBEDTLS_ERR_SSL_TIMEOUT), .description="SSL - The operation timed out"},
-    {.code = -(MBEDTLS_ERR_SSL_CLIENT_RECONNECT), .description="SSL - The client initiated a reconnect from the same port"},
-    {.code = -(MBEDTLS_ERR_SSL_UNEXPECTED_RECORD), .description="SSL - Record header looks valid but is not expected"},
-    {.code = -(MBEDTLS_ERR_SSL_NON_FATAL), .description="SSL - The alert message received indicates a non-fatal error"},
-    {.code = -(MBEDTLS_ERR_SSL_INVALID_VERIFY_HASH), .description="SSL - Couldn't set the hash for verifying CertificateVerify"},
-    {.code = -(MBEDTLS_ERR_SSL_CONTINUE_PROCESSING), .description="SSL - Internal-only message signaling that further message-processing should be done"},
-    {.code = -(MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS), .description="SSL - The asynchronous operation is not completed yet"},
-    {.code = -(MBEDTLS_ERR_SSL_EARLY_MESSAGE), .description="SSL - Internal-only message signaling that a message arrived early"},
-    {.code = -(MBEDTLS_ERR_SSL_UNEXPECTED_CID), .description="SSL - An encrypted DTLS-frame with an unexpected CID was received"},
-    {.code = -(MBEDTLS_ERR_SSL_VERSION_MISMATCH), .description="SSL - An operation failed due to an unexpected version or configuration"},
-    {.code = -(MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS), .description="SSL - A cryptographic operation is in progress. Try again later"},
+        case -(MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE):
+            error_description = "SSL - The requested feature is not available";
+            break;
+        case -(MBEDTLS_ERR_SSL_BAD_INPUT_DATA):
+            error_description = "SSL - Bad input parameters to function";
+            break;
+        case -(MBEDTLS_ERR_SSL_INVALID_MAC):
+            error_description = "SSL - Verification of the message MAC failed";
+            break;
+        case -(MBEDTLS_ERR_SSL_INVALID_RECORD):
+            error_description = "SSL - An invalid SSL record was received";
+            break;
+        case -(MBEDTLS_ERR_SSL_CONN_EOF):
+            error_description = "SSL - The connection indicated an EOF";
+            break;
+        case -(MBEDTLS_ERR_SSL_UNKNOWN_CIPHER):
+            error_description = "SSL - An unknown cipher was received";
+            break;
+        case -(MBEDTLS_ERR_SSL_NO_CIPHER_CHOSEN):
+            error_description = "SSL - The server has no ciphersuites in common with the client";
+            break;
+        case -(MBEDTLS_ERR_SSL_NO_RNG):
+            error_description = "SSL - No RNG was provided to the SSL module";
+            break;
+        case -(MBEDTLS_ERR_SSL_NO_CLIENT_CERTIFICATE):
+            error_description = "SSL - No client certification received from the client, but required by the authentication mode";
+            break;
+        case -(MBEDTLS_ERR_SSL_CERTIFICATE_TOO_LARGE):
+            error_description = "SSL - Our own certificate(s) is/are too large to send in an SSL message";
+            break;
+        case -(MBEDTLS_ERR_SSL_CERTIFICATE_REQUIRED):
+            error_description = "SSL - The own certificate is not set, but needed by the server";
+            break;
+        case -(MBEDTLS_ERR_SSL_PRIVATE_KEY_REQUIRED):
+            error_description = "SSL - The own private key or pre-shared key is not set, but needed";
+            break;
+        case -(MBEDTLS_ERR_SSL_CA_CHAIN_REQUIRED):
+            error_description = "SSL - No CA Chain is set, but required to operate";
+            break;
+        case -(MBEDTLS_ERR_SSL_UNEXPECTED_MESSAGE):
+            error_description = "SSL - An unexpected message was received from our peer";
+            break;
+        case -(MBEDTLS_ERR_SSL_FATAL_ALERT_MESSAGE):
+            error_description = "SSL - A fatal alert message was received from our peer";
+            break;
+        case -(MBEDTLS_ERR_SSL_PEER_VERIFY_FAILED):
+            error_description = "SSL - Verification of our peer failed";
+            break;
+        case -(MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY):
+            error_description = "SSL - The peer notified us that the connection is going to be closed";
+            break;
+        case -(MBEDTLS_ERR_SSL_BAD_HS_CLIENT_HELLO):
+            error_description = "SSL - Processing of the ClientHello handshake message failed";
+            break;
+        case -(MBEDTLS_ERR_SSL_BAD_HS_SERVER_HELLO):
+            error_description = "SSL - Processing of the ServerHello handshake message failed";
+            break;
+        case -(MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE):
+            error_description = "SSL - Processing of the Certificate handshake message failed";
+            break;
+        case -(MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE_REQUEST):
+            error_description = "SSL - Processing of the CertificateRequest handshake message failed";
+            break;
+        case -(MBEDTLS_ERR_SSL_BAD_HS_SERVER_KEY_EXCHANGE):
+            error_description = "SSL - Processing of the ServerKeyExchange handshake message failed";
+            break;
+        case -(MBEDTLS_ERR_SSL_BAD_HS_SERVER_HELLO_DONE):
+            error_description = "SSL - Processing of the ServerHelloDone handshake message failed";
+            break;
+        case -(MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE):
+            error_description = "SSL - Processing of the ClientKeyExchange handshake message failed";
+            break;
+        case -(MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE_RP):
+            error_description = "SSL - Processing of the ClientKeyExchange handshake message failed in DHM / ECDH Read Public";
+            break;
+        case -(MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE_CS):
+            error_description = "SSL - Processing of the ClientKeyExchange handshake message failed in DHM / ECDH Calculate Secret";
+            break;
+        case -(MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE_VERIFY):
+            error_description = "SSL - Processing of the CertificateVerify handshake message failed";
+            break;
+        case -(MBEDTLS_ERR_SSL_BAD_HS_CHANGE_CIPHER_SPEC):
+            error_description = "SSL - Processing of the ChangeCipherSpec handshake message failed";
+            break;
+        case -(MBEDTLS_ERR_SSL_BAD_HS_FINISHED):
+            error_description = "SSL - Processing of the Finished handshake message failed";
+            break;
+        case -(MBEDTLS_ERR_SSL_ALLOC_FAILED):
+            error_description = "SSL - Memory allocation failed";
+            break;
+        case -(MBEDTLS_ERR_SSL_HW_ACCEL_FAILED):
+            error_description = "SSL - Hardware acceleration function returned with error";
+            break;
+        case -(MBEDTLS_ERR_SSL_HW_ACCEL_FALLTHROUGH):
+            error_description = "SSL - Hardware acceleration function skipped / left alone data";
+            break;
+        case -(MBEDTLS_ERR_SSL_COMPRESSION_FAILED):
+            error_description = "SSL - Processing of the compression / decompression failed";
+            break;
+        case -(MBEDTLS_ERR_SSL_BAD_HS_PROTOCOL_VERSION):
+            error_description = "SSL - Handshake protocol not within min/max boundaries";
+            break;
+        case -(MBEDTLS_ERR_SSL_BAD_HS_NEW_SESSION_TICKET):
+            error_description = "SSL - Processing of the NewSessionTicket handshake message failed";
+            break;
+        case -(MBEDTLS_ERR_SSL_SESSION_TICKET_EXPIRED):
+            error_description = "SSL - Session ticket has expired";
+            break;
+        case -(MBEDTLS_ERR_SSL_PK_TYPE_MISMATCH):
+            error_description = "SSL - Public key type mismatch (eg, asked for RSA key exchange and presented EC key)";
+            break;
+        case -(MBEDTLS_ERR_SSL_UNKNOWN_IDENTITY):
+            error_description = "SSL - Unknown identity received (eg, PSK identity)";
+            break;
+        case -(MBEDTLS_ERR_SSL_INTERNAL_ERROR):
+            error_description = "SSL - Internal error (eg, unexpected failure in lower-level module)";
+            break;
+        case -(MBEDTLS_ERR_SSL_COUNTER_WRAPPING):
+            error_description = "SSL - A counter would wrap (eg, too many messages exchanged)";
+            break;
+        case -(MBEDTLS_ERR_SSL_WAITING_SERVER_HELLO_RENEGO):
+            error_description = "SSL - Unexpected message at ServerHello in renegotiation";
+            break;
+        case -(MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED):
+            error_description = "SSL - DTLS client must retry for hello verification";
+            break;
+        case -(MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL):
+            error_description = "SSL - A buffer is too small to receive or write a message";
+            break;
+        case -(MBEDTLS_ERR_SSL_NO_USABLE_CIPHERSUITE):
+            error_description = "SSL - None of the common ciphersuites is usable (eg, no suitable certificate, see debug messages)";
+            break;
+        case -(MBEDTLS_ERR_SSL_WANT_READ):
+            error_description = "SSL - No data of requested type currently available on underlying transport";
+            break;
+        case -(MBEDTLS_ERR_SSL_WANT_WRITE):
+            error_description = "SSL - Connection requires a write call";
+            break;
+        case -(MBEDTLS_ERR_SSL_TIMEOUT):
+            error_description = "SSL - The operation timed out";
+            break;
+        case -(MBEDTLS_ERR_SSL_CLIENT_RECONNECT):
+            error_description = "SSL - The client initiated a reconnect from the same port";
+            break;
+        case -(MBEDTLS_ERR_SSL_UNEXPECTED_RECORD):
+            error_description = "SSL - Record header looks valid but is not expected";
+            break;
+        case -(MBEDTLS_ERR_SSL_NON_FATAL):
+            error_description = "SSL - The alert message received indicates a non-fatal error";
+            break;
+        case -(MBEDTLS_ERR_SSL_INVALID_VERIFY_HASH):
+            error_description = "SSL - Couldn't set the hash for verifying CertificateVerify";
+            break;
+        case -(MBEDTLS_ERR_SSL_CONTINUE_PROCESSING):
+            error_description = "SSL - Internal-only message signaling that further message-processing should be done";
+            break;
+        case -(MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS):
+            error_description = "SSL - The asynchronous operation is not completed yet";
+            break;
+        case -(MBEDTLS_ERR_SSL_EARLY_MESSAGE):
+            error_description = "SSL - Internal-only message signaling that a message arrived early";
+            break;
+        case -(MBEDTLS_ERR_SSL_UNEXPECTED_CID):
+            error_description = "SSL - An encrypted DTLS-frame with an unexpected CID was received";
+            break;
+        case -(MBEDTLS_ERR_SSL_VERSION_MISMATCH):
+            error_description = "SSL - An operation failed due to an unexpected version or configuration";
+            break;
+        case -(MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS):
+            error_description = "SSL - A cryptographic operation is in progress. Try again later";
+            break;
 #endif /* MBEDTLS_SSL_TLS_C */
 
 #if defined(MBEDTLS_X509_USE_C) || defined(MBEDTLS_X509_CREATE_C)
-    {.code = -(MBEDTLS_ERR_X509_FEATURE_UNAVAILABLE), .description="X509 - Unavailable feature, e.g. RSA hashing/encryption combination"},
-    {.code = -(MBEDTLS_ERR_X509_UNKNOWN_OID), .description="X509 - Requested OID is unknown"},
-    {.code = -(MBEDTLS_ERR_X509_INVALID_FORMAT), .description="X509 - The CRT/CRL/CSR format is invalid, e.g. different type expected"},
-    {.code = -(MBEDTLS_ERR_X509_INVALID_VERSION), .description="X509 - The CRT/CRL/CSR version element is invalid"},
-    {.code = -(MBEDTLS_ERR_X509_INVALID_SERIAL), .description="X509 - The serial tag or value is invalid"},
-    {.code = -(MBEDTLS_ERR_X509_INVALID_ALG), .description="X509 - The algorithm tag or value is invalid"},
-    {.code = -(MBEDTLS_ERR_X509_INVALID_NAME), .description="X509 - The name tag or value is invalid"},
-    {.code = -(MBEDTLS_ERR_X509_INVALID_DATE), .description="X509 - The date tag or value is invalid"},
-    {.code = -(MBEDTLS_ERR_X509_INVALID_SIGNATURE), .description="X509 - The signature tag or value invalid"},
-    {.code = -(MBEDTLS_ERR_X509_INVALID_EXTENSIONS), .description="X509 - The extension tag or value is invalid"},
-    {.code = -(MBEDTLS_ERR_X509_UNKNOWN_VERSION), .description="X509 - CRT/CRL/CSR has an unsupported version number"},
-    {.code = -(MBEDTLS_ERR_X509_UNKNOWN_SIG_ALG), .description="X509 - Signature algorithm (oid) is unsupported"},
-    {.code = -(MBEDTLS_ERR_X509_SIG_MISMATCH), .description="X509 - Signature algorithms do not match. (see \\c ::mbedtls_x509_crt sig_oid)"},
-    {.code = -(MBEDTLS_ERR_X509_CERT_VERIFY_FAILED), .description="X509 - Certificate verification failed, e.g. CRL, CA or signature check failed"},
-    {.code = -(MBEDTLS_ERR_X509_CERT_UNKNOWN_FORMAT), .description="X509 - Format not recognized as DER or PEM"},
-    {.code = -(MBEDTLS_ERR_X509_BAD_INPUT_DATA), .description="X509 - Input invalid"},
-    {.code = -(MBEDTLS_ERR_X509_ALLOC_FAILED), .description="X509 - Allocation of memory failed"},
-    {.code = -(MBEDTLS_ERR_X509_FILE_IO_ERROR), .description="X509 - Read/write of file failed"},
-    {.code = -(MBEDTLS_ERR_X509_BUFFER_TOO_SMALL), .description="X509 - Destination buffer is too small"},
-    {.code = -(MBEDTLS_ERR_X509_FATAL_ERROR), .description="X509 - A fatal error occurred, eg the chain is too long or the vrfy callback failed"},
-#endif /* MBEDTLS_X509_USE_C || MBEDTLS_X509_CREATE_C */
-};
-
-#define NUM_HIGH_LEVEL_ERRORS ( sizeof(high_level_errors)/sizeof(mbedtls_error_t) )
-
-static mbedtls_error_t low_level_errors[] =
-{
-#if defined(MBEDTLS_AES_C)
-    {.code = -(MBEDTLS_ERR_AES_INVALID_KEY_LENGTH), .description="AES - Invalid key length"},
-    {.code = -(MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH), .description="AES - Invalid data input length"},
-    {.code = -(MBEDTLS_ERR_AES_BAD_INPUT_DATA), .description="AES - Invalid input data"},
-    {.code = -(MBEDTLS_ERR_AES_FEATURE_UNAVAILABLE), .description="AES - Feature not available. For example, an unsupported AES key size"},
-    {.code = -(MBEDTLS_ERR_AES_HW_ACCEL_FAILED), .description="AES - AES hardware accelerator failed"},
-#endif /* MBEDTLS_AES_C */
-
-#if defined(MBEDTLS_ARC4_C)
-    {.code = -(MBEDTLS_ERR_ARC4_HW_ACCEL_FAILED), .description="ARC4 - ARC4 hardware accelerator failed"},
-#endif /* MBEDTLS_ARC4_C */
-
-#if defined(MBEDTLS_ARIA_C)
-    {.code = -(MBEDTLS_ERR_ARIA_BAD_INPUT_DATA), .description="ARIA - Bad input data"},
-    {.code = -(MBEDTLS_ERR_ARIA_INVALID_INPUT_LENGTH), .description="ARIA - Invalid data input length"},
-    {.code = -(MBEDTLS_ERR_ARIA_FEATURE_UNAVAILABLE), .description="ARIA - Feature not available. For example, an unsupported ARIA key size"},
-    {.code = -(MBEDTLS_ERR_ARIA_HW_ACCEL_FAILED), .description="ARIA - ARIA hardware accelerator failed"},
-#endif /* MBEDTLS_ARIA_C */
-
-#if defined(MBEDTLS_ASN1_PARSE_C)
-    {.code = -(MBEDTLS_ERR_ASN1_OUT_OF_DATA), .description="ASN1 - Out of data when parsing an ASN1 data structure"},
-    {.code = -(MBEDTLS_ERR_ASN1_UNEXPECTED_TAG), .description="ASN1 - ASN1 tag was of an unexpected value"},
-    {.code = -(MBEDTLS_ERR_ASN1_INVALID_LENGTH), .description="ASN1 - Error when trying to determine the length or invalid length"},
-    {.code = -(MBEDTLS_ERR_ASN1_LENGTH_MISMATCH), .description="ASN1 - Actual length differs from expected length"},
-    {.code = -(MBEDTLS_ERR_ASN1_INVALID_DATA), .description="ASN1 - Data is invalid"},
-    {.code = -(MBEDTLS_ERR_ASN1_ALLOC_FAILED), .description="ASN1 - Memory allocation failed"},
-    {.code = -(MBEDTLS_ERR_ASN1_BUF_TOO_SMALL), .description="ASN1 - Buffer too small when writing ASN.1 data structure"},
-#endif /* MBEDTLS_ASN1_PARSE_C */
-
-#if defined(MBEDTLS_BASE64_C)
-    {.code = -(MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL), .description="BASE64 - Output buffer too small"},
-    {.code = -(MBEDTLS_ERR_BASE64_INVALID_CHARACTER), .description="BASE64 - Invalid character in input"},
-#endif /* MBEDTLS_BASE64_C */
-
-#if defined(MBEDTLS_BIGNUM_C)
-    {.code = -(MBEDTLS_ERR_MPI_FILE_IO_ERROR), .description="BIGNUM - An error occurred while reading from or writing to a file"},
-    {.code = -(MBEDTLS_ERR_MPI_BAD_INPUT_DATA), .description="BIGNUM - Bad input parameters to function"},
-    {.code = -(MBEDTLS_ERR_MPI_INVALID_CHARACTER), .description="BIGNUM - There is an invalid character in the digit string"},
-    {.code = -(MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL), .description="BIGNUM - The buffer is too small to write to"},
-    {.code = -(MBEDTLS_ERR_MPI_NEGATIVE_VALUE), .description="BIGNUM - The input arguments are negative or result in illegal output"},
-    {.code = -(MBEDTLS_ERR_MPI_DIVISION_BY_ZERO), .description="BIGNUM - The input argument for division is zero, which is not allowed"},
-    {.code = -(MBEDTLS_ERR_MPI_NOT_ACCEPTABLE), .description="BIGNUM - The input arguments are not acceptable"},
-    {.code = -(MBEDTLS_ERR_MPI_ALLOC_FAILED), .description="BIGNUM - Memory allocation failed"},
-#endif /* MBEDTLS_BIGNUM_C */
-
-#if defined(MBEDTLS_BLOWFISH_C)
-    {.code = -(MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA), .description="BLOWFISH - Bad input data"},
-    {.code = -(MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH), .description="BLOWFISH - Invalid data input length"},
-    {.code = -(MBEDTLS_ERR_BLOWFISH_HW_ACCEL_FAILED), .description="BLOWFISH - Blowfish hardware accelerator failed"},
-#endif /* MBEDTLS_BLOWFISH_C */
-
-#if defined(MBEDTLS_CAMELLIA_C)
-    {.code = -(MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA), .description="CAMELLIA - Bad input data"},
-    {.code = -(MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH), .description="CAMELLIA - Invalid data input length"},
-    {.code = -(MBEDTLS_ERR_CAMELLIA_HW_ACCEL_FAILED), .description="CAMELLIA - Camellia hardware accelerator failed"},
-#endif /* MBEDTLS_CAMELLIA_C */
-
-#if defined(MBEDTLS_CCM_C)
-    {.code = -(MBEDTLS_ERR_CCM_BAD_INPUT), .description="CCM - Bad input parameters to the function"},
-    {.code = -(MBEDTLS_ERR_CCM_AUTH_FAILED), .description="CCM - Authenticated decryption failed"},
-    {.code = -(MBEDTLS_ERR_CCM_HW_ACCEL_FAILED), .description="CCM - CCM hardware accelerator failed"},
-#endif /* MBEDTLS_CCM_C */
-
-#if defined(MBEDTLS_CHACHA20_C)
-    {.code = -(MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA), .description="CHACHA20 - Invalid input parameter(s)"},
-    {.code = -(MBEDTLS_ERR_CHACHA20_FEATURE_UNAVAILABLE), .description="CHACHA20 - Feature not available. For example, s part of the API is not implemented"},
-    {.code = -(MBEDTLS_ERR_CHACHA20_HW_ACCEL_FAILED), .description="CHACHA20 - Chacha20 hardware accelerator failed"},
-#endif /* MBEDTLS_CHACHA20_C */
-
-#if defined(MBEDTLS_CHACHAPOLY_C)
-    {.code = -(MBEDTLS_ERR_CHACHAPOLY_BAD_STATE), .description="CHACHAPOLY - The requested operation is not permitted in the current state"},
-    {.code = -(MBEDTLS_ERR_CHACHAPOLY_AUTH_FAILED), .description="CHACHAPOLY - Authenticated decryption failed: data was not authentic"},
-#endif /* MBEDTLS_CHACHAPOLY_C */
-
-#if defined(MBEDTLS_CMAC_C)
-    {.code = -(MBEDTLS_ERR_CMAC_HW_ACCEL_FAILED), .description="CMAC - CMAC hardware accelerator failed"},
-#endif /* MBEDTLS_CMAC_C */
-
-#if defined(MBEDTLS_CTR_DRBG_C)
-    {.code = -(MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED), .description="CTR_DRBG - The entropy source failed"},
-    {.code = -(MBEDTLS_ERR_CTR_DRBG_REQUEST_TOO_BIG), .description="CTR_DRBG - The requested random buffer length is too big"},
-    {.code = -(MBEDTLS_ERR_CTR_DRBG_INPUT_TOO_BIG), .description="CTR_DRBG - The input (entropy + additional data) is too large"},
-    {.code = -(MBEDTLS_ERR_CTR_DRBG_FILE_IO_ERROR), .description="CTR_DRBG - Read or write error in file"},
-#endif /* MBEDTLS_CTR_DRBG_C */
-
-#if defined(MBEDTLS_DES_C)
-    {.code = -(MBEDTLS_ERR_DES_INVALID_INPUT_LENGTH), .description="DES - The data input has an invalid length"},
-    {.code = -(MBEDTLS_ERR_DES_HW_ACCEL_FAILED), .description="DES - DES hardware accelerator failed"},
-#endif /* MBEDTLS_DES_C */
-
-#if defined(MBEDTLS_ENTROPY_C)
-    {.code = -(MBEDTLS_ERR_ENTROPY_SOURCE_FAILED), .description="ENTROPY - Critical entropy source failure"},
-    {.code = -(MBEDTLS_ERR_ENTROPY_MAX_SOURCES), .description="ENTROPY - No more sources can be added"},
-    {.code = -(MBEDTLS_ERR_ENTROPY_NO_SOURCES_DEFINED), .description="ENTROPY - No sources have been added to poll"},
-    {.code = -(MBEDTLS_ERR_ENTROPY_NO_STRONG_SOURCE), .description="ENTROPY - No strong sources have been added to poll"},
-    {.code = -(MBEDTLS_ERR_ENTROPY_FILE_IO_ERROR), .description="ENTROPY - Read/write error in file"},
-#endif /* MBEDTLS_ENTROPY_C */
-
-#if defined(MBEDTLS_ERROR_C)
-    {.code = -(MBEDTLS_ERR_ERROR_GENERIC_ERROR), .description="ERROR - Generic error"},
-    {.code = -(MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED), .description="ERROR - This is a bug in the library"},
-#endif /* MBEDTLS_ERROR_C */
-
-#if defined(MBEDTLS_GCM_C)
-    {.code = -(MBEDTLS_ERR_GCM_AUTH_FAILED), .description="GCM - Authenticated decryption failed"},
-    {.code = -(MBEDTLS_ERR_GCM_HW_ACCEL_FAILED), .description="GCM - GCM hardware accelerator failed"},
-    {.code = -(MBEDTLS_ERR_GCM_BAD_INPUT), .description="GCM - Bad input parameters to function"},
-#endif /* MBEDTLS_GCM_C */
-
-#if defined(MBEDTLS_HKDF_C)
-    {.code = -(MBEDTLS_ERR_HKDF_BAD_INPUT_DATA), .description="HKDF - Bad input parameters to function"},
-#endif /* MBEDTLS_HKDF_C */
-
-#if defined(MBEDTLS_HMAC_DRBG_C)
-    {.code = -(MBEDTLS_ERR_HMAC_DRBG_REQUEST_TOO_BIG), .description="HMAC_DRBG - Too many random requested in single call"},
-    {.code = -(MBEDTLS_ERR_HMAC_DRBG_INPUT_TOO_BIG), .description="HMAC_DRBG - Input too large (Entropy + additional)"},
-    {.code = -(MBEDTLS_ERR_HMAC_DRBG_FILE_IO_ERROR), .description="HMAC_DRBG - Read/write error in file"},
-    {.code = -(MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED), .description="HMAC_DRBG - The entropy source failed"},
-#endif /* MBEDTLS_HMAC_DRBG_C */
-
-#if defined(MBEDTLS_MD2_C)
-    {.code = -(MBEDTLS_ERR_MD2_HW_ACCEL_FAILED), .description="MD2 - MD2 hardware accelerator failed"},
-#endif /* MBEDTLS_MD2_C */
-
-#if defined(MBEDTLS_MD4_C)
-    {.code = -(MBEDTLS_ERR_MD4_HW_ACCEL_FAILED), .description="MD4 - MD4 hardware accelerator failed"},
-#endif /* MBEDTLS_MD4_C */
-
-#if defined(MBEDTLS_MD5_C)
-    {.code = -(MBEDTLS_ERR_MD5_HW_ACCEL_FAILED), .description="MD5 - MD5 hardware accelerator failed"},
-#endif /* MBEDTLS_MD5_C */
-
-#if defined(MBEDTLS_NET_C)
-    {.code = -(MBEDTLS_ERR_NET_SOCKET_FAILED), .description="NET - Failed to open a socket"},
-    {.code = -(MBEDTLS_ERR_NET_CONNECT_FAILED), .description="NET - The connection to the given server / port failed"},
-    {.code = -(MBEDTLS_ERR_NET_BIND_FAILED), .description="NET - Binding of the socket failed"},
-    {.code = -(MBEDTLS_ERR_NET_LISTEN_FAILED), .description="NET - Could not listen on the socket"},
-    {.code = -(MBEDTLS_ERR_NET_ACCEPT_FAILED), .description="NET - Could not accept the incoming connection"},
-    {.code = -(MBEDTLS_ERR_NET_RECV_FAILED), .description="NET - Reading information from the socket failed"},
-    {.code = -(MBEDTLS_ERR_NET_SEND_FAILED), .description="NET - Sending information through the socket failed"},
-    {.code = -(MBEDTLS_ERR_NET_CONN_RESET), .description="NET - Connection was reset by peer"},
-    {.code = -(MBEDTLS_ERR_NET_UNKNOWN_HOST), .description="NET - Failed to get an IP address for the given hostname"},
-    {.code = -(MBEDTLS_ERR_NET_BUFFER_TOO_SMALL), .description="NET - Buffer is too small to hold the data"},
-    {.code = -(MBEDTLS_ERR_NET_INVALID_CONTEXT), .description="NET - The context is invalid, eg because it was free()ed"},
-    {.code = -(MBEDTLS_ERR_NET_POLL_FAILED), .description="NET - Polling the net context failed"},
-    {.code = -(MBEDTLS_ERR_NET_BAD_INPUT_DATA), .description="NET - Input invalid"},
-#endif /* MBEDTLS_NET_C */
-
-#if defined(MBEDTLS_OID_C)
-    {.code = -(MBEDTLS_ERR_OID_NOT_FOUND), .description="OID - OID is not found"},
-    {.code = -(MBEDTLS_ERR_OID_BUF_TOO_SMALL), .description="OID - output buffer is too small"},
-#endif /* MBEDTLS_OID_C */
-
-#if defined(MBEDTLS_PADLOCK_C)
-    {.code = -(MBEDTLS_ERR_PADLOCK_DATA_MISALIGNED), .description="PADLOCK - Input data should be aligned"},
-#endif /* MBEDTLS_PADLOCK_C */
-
-#if defined(MBEDTLS_PLATFORM_C)
-    {.code = -(MBEDTLS_ERR_PLATFORM_HW_ACCEL_FAILED), .description="PLATFORM - Hardware accelerator failed"},
-    {.code = -(MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED), .description="PLATFORM - The requested feature is not supported by the platform"},
-#endif /* MBEDTLS_PLATFORM_C */
-
-#if defined(MBEDTLS_POLY1305_C)
-    {.code = -(MBEDTLS_ERR_POLY1305_BAD_INPUT_DATA), .description="POLY1305 - Invalid input parameter(s)"},
-    {.code = -(MBEDTLS_ERR_POLY1305_FEATURE_UNAVAILABLE), .description="POLY1305 - Feature not available. For example, s part of the API is not implemented"},
-    {.code = -(MBEDTLS_ERR_POLY1305_HW_ACCEL_FAILED), .description="POLY1305 - Poly1305 hardware accelerator failed"},
-#endif /* MBEDTLS_POLY1305_C */
-
-#if defined(MBEDTLS_RIPEMD160_C)
-    {.code = -(MBEDTLS_ERR_RIPEMD160_HW_ACCEL_FAILED), .description="RIPEMD160 - RIPEMD160 hardware accelerator failed"},
-#endif /* MBEDTLS_RIPEMD160_C */
-
-#if defined(MBEDTLS_SHA1_C)
-    {.code = -(MBEDTLS_ERR_SHA1_HW_ACCEL_FAILED), .description="SHA1 - SHA-1 hardware accelerator failed"},
-    {.code = -(MBEDTLS_ERR_SHA1_BAD_INPUT_DATA), .description="SHA1 - SHA-1 input data was malformed"},
-#endif /* MBEDTLS_SHA1_C */
-
-#if defined(MBEDTLS_SHA256_C)
-    {.code = -(MBEDTLS_ERR_SHA256_HW_ACCEL_FAILED), .description="SHA256 - SHA-256 hardware accelerator failed"},
-    {.code = -(MBEDTLS_ERR_SHA256_BAD_INPUT_DATA), .description="SHA256 - SHA-256 input data was malformed"},
-#endif /* MBEDTLS_SHA256_C */
-
-#if defined(MBEDTLS_SHA512_C)
-    {.code = -(MBEDTLS_ERR_SHA512_HW_ACCEL_FAILED), .description="SHA512 - SHA-512 hardware accelerator failed"},
-    {.code = -(MBEDTLS_ERR_SHA512_BAD_INPUT_DATA), .description="SHA512 - SHA-512 input data was malformed"},
-#endif /* MBEDTLS_SHA512_C */
-
-#if defined(MBEDTLS_THREADING_C)
-    {.code = -(MBEDTLS_ERR_THREADING_FEATURE_UNAVAILABLE), .description="THREADING - The selected feature is not available"},
-    {.code = -(MBEDTLS_ERR_THREADING_BAD_INPUT_DATA), .description="THREADING - Bad input parameters to function"},
-    {.code = -(MBEDTLS_ERR_THREADING_MUTEX_ERROR), .description="THREADING - Locking / unlocking / free failed with error code"},
-#endif /* MBEDTLS_THREADING_C */
-
-#if defined(MBEDTLS_XTEA_C)
-    {.code = -(MBEDTLS_ERR_XTEA_INVALID_INPUT_LENGTH), .description="XTEA - The data input has an invalid length"},
-    {.code = -(MBEDTLS_ERR_XTEA_HW_ACCEL_FAILED), .description="XTEA - XTEA hardware accelerator failed"},
-#endif /* MBEDTLS_XTEA_C */
-};
-
-#define NUM_LOW_LEVEL_ERRORS  ( sizeof(low_level_errors)/sizeof(mbedtls_error_t) )
-
-const char * mbedtls_high_level_strerr( int error_code )
-{
-    size_t i;
-    const char *error_description = NULL;
-
-    for(i = 0; i < NUM_HIGH_LEVEL_ERRORS; i++ )
-    {
-        if( high_level_errors[i].code == error_code )
-        {
-            error_description = high_level_errors[i].description;
+        case -(MBEDTLS_ERR_X509_FEATURE_UNAVAILABLE):
+            error_description = "X509 - Unavailable feature, e.g. RSA hashing/encryption combination";
             break;
-        }
+        case -(MBEDTLS_ERR_X509_UNKNOWN_OID):
+            error_description = "X509 - Requested OID is unknown";
+            break;
+        case -(MBEDTLS_ERR_X509_INVALID_FORMAT):
+            error_description = "X509 - The CRT/CRL/CSR format is invalid, e.g. different type expected";
+            break;
+        case -(MBEDTLS_ERR_X509_INVALID_VERSION):
+            error_description = "X509 - The CRT/CRL/CSR version element is invalid";
+            break;
+        case -(MBEDTLS_ERR_X509_INVALID_SERIAL):
+            error_description = "X509 - The serial tag or value is invalid";
+            break;
+        case -(MBEDTLS_ERR_X509_INVALID_ALG):
+            error_description = "X509 - The algorithm tag or value is invalid";
+            break;
+        case -(MBEDTLS_ERR_X509_INVALID_NAME):
+            error_description = "X509 - The name tag or value is invalid";
+            break;
+        case -(MBEDTLS_ERR_X509_INVALID_DATE):
+            error_description = "X509 - The date tag or value is invalid";
+            break;
+        case -(MBEDTLS_ERR_X509_INVALID_SIGNATURE):
+            error_description = "X509 - The signature tag or value invalid";
+            break;
+        case -(MBEDTLS_ERR_X509_INVALID_EXTENSIONS):
+            error_description = "X509 - The extension tag or value is invalid";
+            break;
+        case -(MBEDTLS_ERR_X509_UNKNOWN_VERSION):
+            error_description = "X509 - CRT/CRL/CSR has an unsupported version number";
+            break;
+        case -(MBEDTLS_ERR_X509_UNKNOWN_SIG_ALG):
+            error_description = "X509 - Signature algorithm (oid) is unsupported";
+            break;
+        case -(MBEDTLS_ERR_X509_SIG_MISMATCH):
+            error_description = "X509 - Signature algorithms do not match. (see \\c ::mbedtls_x509_crt sig_oid)";
+            break;
+        case -(MBEDTLS_ERR_X509_CERT_VERIFY_FAILED):
+            error_description = "X509 - Certificate verification failed, e.g. CRL, CA or signature check failed";
+            break;
+        case -(MBEDTLS_ERR_X509_CERT_UNKNOWN_FORMAT):
+            error_description = "X509 - Format not recognized as DER or PEM";
+            break;
+        case -(MBEDTLS_ERR_X509_BAD_INPUT_DATA):
+            error_description = "X509 - Input invalid";
+            break;
+        case -(MBEDTLS_ERR_X509_ALLOC_FAILED):
+            error_description = "X509 - Allocation of memory failed";
+            break;
+        case -(MBEDTLS_ERR_X509_FILE_IO_ERROR):
+            error_description = "X509 - Read/write of file failed";
+            break;
+        case -(MBEDTLS_ERR_X509_BUFFER_TOO_SMALL):
+            error_description = "X509 - Destination buffer is too small";
+            break;
+        case -(MBEDTLS_ERR_X509_FATAL_ERROR):
+            error_description = "X509 - A fatal error occurred, eg the chain is too long or the vrfy callback failed";
+            break;
+#endif /* MBEDTLS_X509_USE_C || MBEDTLS_X509_CREATE_C */
+
+        default:
+            break;
     }
 
     return error_description;
@@ -633,16 +723,408 @@
 
 const char * mbedtls_low_level_strerr( int error_code )
 {
-    size_t i;
     const char *error_description = NULL;
 
-    for(i = 0; i < NUM_LOW_LEVEL_ERRORS; i++ )
+    switch( error_code )
     {
-        if( low_level_errors[i].code == error_code )
-        {
-            error_description = low_level_errors[i].description;
+#if defined(MBEDTLS_AES_C)
+        case -(MBEDTLS_ERR_AES_INVALID_KEY_LENGTH):
+            error_description = "AES - Invalid key length";
             break;
-        }
+        case -(MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH):
+            error_description = "AES - Invalid data input length";
+            break;
+        case -(MBEDTLS_ERR_AES_BAD_INPUT_DATA):
+            error_description = "AES - Invalid input data";
+            break;
+        case -(MBEDTLS_ERR_AES_FEATURE_UNAVAILABLE):
+            error_description = "AES - Feature not available. For example, an unsupported AES key size";
+            break;
+        case -(MBEDTLS_ERR_AES_HW_ACCEL_FAILED):
+            error_description = "AES - AES hardware accelerator failed";
+            break;
+#endif /* MBEDTLS_AES_C */
+
+#if defined(MBEDTLS_ARC4_C)
+        case -(MBEDTLS_ERR_ARC4_HW_ACCEL_FAILED):
+            error_description = "ARC4 - ARC4 hardware accelerator failed";
+            break;
+#endif /* MBEDTLS_ARC4_C */
+
+#if defined(MBEDTLS_ARIA_C)
+        case -(MBEDTLS_ERR_ARIA_BAD_INPUT_DATA):
+            error_description = "ARIA - Bad input data";
+            break;
+        case -(MBEDTLS_ERR_ARIA_INVALID_INPUT_LENGTH):
+            error_description = "ARIA - Invalid data input length";
+            break;
+        case -(MBEDTLS_ERR_ARIA_FEATURE_UNAVAILABLE):
+            error_description = "ARIA - Feature not available. For example, an unsupported ARIA key size";
+            break;
+        case -(MBEDTLS_ERR_ARIA_HW_ACCEL_FAILED):
+            error_description = "ARIA - ARIA hardware accelerator failed";
+            break;
+#endif /* MBEDTLS_ARIA_C */
+
+#if defined(MBEDTLS_ASN1_PARSE_C)
+        case -(MBEDTLS_ERR_ASN1_OUT_OF_DATA):
+            error_description = "ASN1 - Out of data when parsing an ASN1 data structure";
+            break;
+        case -(MBEDTLS_ERR_ASN1_UNEXPECTED_TAG):
+            error_description = "ASN1 - ASN1 tag was of an unexpected value";
+            break;
+        case -(MBEDTLS_ERR_ASN1_INVALID_LENGTH):
+            error_description = "ASN1 - Error when trying to determine the length or invalid length";
+            break;
+        case -(MBEDTLS_ERR_ASN1_LENGTH_MISMATCH):
+            error_description = "ASN1 - Actual length differs from expected length";
+            break;
+        case -(MBEDTLS_ERR_ASN1_INVALID_DATA):
+            error_description = "ASN1 - Data is invalid";
+            break;
+        case -(MBEDTLS_ERR_ASN1_ALLOC_FAILED):
+            error_description = "ASN1 - Memory allocation failed";
+            break;
+        case -(MBEDTLS_ERR_ASN1_BUF_TOO_SMALL):
+            error_description = "ASN1 - Buffer too small when writing ASN.1 data structure";
+            break;
+#endif /* MBEDTLS_ASN1_PARSE_C */
+
+#if defined(MBEDTLS_BASE64_C)
+        case -(MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL):
+            error_description = "BASE64 - Output buffer too small";
+            break;
+        case -(MBEDTLS_ERR_BASE64_INVALID_CHARACTER):
+            error_description = "BASE64 - Invalid character in input";
+            break;
+#endif /* MBEDTLS_BASE64_C */
+
+#if defined(MBEDTLS_BIGNUM_C)
+        case -(MBEDTLS_ERR_MPI_FILE_IO_ERROR):
+            error_description = "BIGNUM - An error occurred while reading from or writing to a file";
+            break;
+        case -(MBEDTLS_ERR_MPI_BAD_INPUT_DATA):
+            error_description = "BIGNUM - Bad input parameters to function";
+            break;
+        case -(MBEDTLS_ERR_MPI_INVALID_CHARACTER):
+            error_description = "BIGNUM - There is an invalid character in the digit string";
+            break;
+        case -(MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL):
+            error_description = "BIGNUM - The buffer is too small to write to";
+            break;
+        case -(MBEDTLS_ERR_MPI_NEGATIVE_VALUE):
+            error_description = "BIGNUM - The input arguments are negative or result in illegal output";
+            break;
+        case -(MBEDTLS_ERR_MPI_DIVISION_BY_ZERO):
+            error_description = "BIGNUM - The input argument for division is zero, which is not allowed";
+            break;
+        case -(MBEDTLS_ERR_MPI_NOT_ACCEPTABLE):
+            error_description = "BIGNUM - The input arguments are not acceptable";
+            break;
+        case -(MBEDTLS_ERR_MPI_ALLOC_FAILED):
+            error_description = "BIGNUM - Memory allocation failed";
+            break;
+#endif /* MBEDTLS_BIGNUM_C */
+
+#if defined(MBEDTLS_BLOWFISH_C)
+        case -(MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA):
+            error_description = "BLOWFISH - Bad input data";
+            break;
+        case -(MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH):
+            error_description = "BLOWFISH - Invalid data input length";
+            break;
+        case -(MBEDTLS_ERR_BLOWFISH_HW_ACCEL_FAILED):
+            error_description = "BLOWFISH - Blowfish hardware accelerator failed";
+            break;
+#endif /* MBEDTLS_BLOWFISH_C */
+
+#if defined(MBEDTLS_CAMELLIA_C)
+        case -(MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA):
+            error_description = "CAMELLIA - Bad input data";
+            break;
+        case -(MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH):
+            error_description = "CAMELLIA - Invalid data input length";
+            break;
+        case -(MBEDTLS_ERR_CAMELLIA_HW_ACCEL_FAILED):
+            error_description = "CAMELLIA - Camellia hardware accelerator failed";
+            break;
+#endif /* MBEDTLS_CAMELLIA_C */
+
+#if defined(MBEDTLS_CCM_C)
+        case -(MBEDTLS_ERR_CCM_BAD_INPUT):
+            error_description = "CCM - Bad input parameters to the function";
+            break;
+        case -(MBEDTLS_ERR_CCM_AUTH_FAILED):
+            error_description = "CCM - Authenticated decryption failed";
+            break;
+        case -(MBEDTLS_ERR_CCM_HW_ACCEL_FAILED):
+            error_description = "CCM - CCM hardware accelerator failed";
+            break;
+#endif /* MBEDTLS_CCM_C */
+
+#if defined(MBEDTLS_CHACHA20_C)
+        case -(MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA):
+            error_description = "CHACHA20 - Invalid input parameter(s)";
+            break;
+        case -(MBEDTLS_ERR_CHACHA20_FEATURE_UNAVAILABLE):
+            error_description = "CHACHA20 - Feature not available. For example, s part of the API is not implemented";
+            break;
+        case -(MBEDTLS_ERR_CHACHA20_HW_ACCEL_FAILED):
+            error_description = "CHACHA20 - Chacha20 hardware accelerator failed";
+            break;
+#endif /* MBEDTLS_CHACHA20_C */
+
+#if defined(MBEDTLS_CHACHAPOLY_C)
+        case -(MBEDTLS_ERR_CHACHAPOLY_BAD_STATE):
+            error_description = "CHACHAPOLY - The requested operation is not permitted in the current state";
+            break;
+        case -(MBEDTLS_ERR_CHACHAPOLY_AUTH_FAILED):
+            error_description = "CHACHAPOLY - Authenticated decryption failed: data was not authentic";
+            break;
+#endif /* MBEDTLS_CHACHAPOLY_C */
+
+#if defined(MBEDTLS_CMAC_C)
+        case -(MBEDTLS_ERR_CMAC_HW_ACCEL_FAILED):
+            error_description = "CMAC - CMAC hardware accelerator failed";
+            break;
+#endif /* MBEDTLS_CMAC_C */
+
+#if defined(MBEDTLS_CTR_DRBG_C)
+        case -(MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED):
+            error_description = "CTR_DRBG - The entropy source failed";
+            break;
+        case -(MBEDTLS_ERR_CTR_DRBG_REQUEST_TOO_BIG):
+            error_description = "CTR_DRBG - The requested random buffer length is too big";
+            break;
+        case -(MBEDTLS_ERR_CTR_DRBG_INPUT_TOO_BIG):
+            error_description = "CTR_DRBG - The input (entropy + additional data) is too large";
+            break;
+        case -(MBEDTLS_ERR_CTR_DRBG_FILE_IO_ERROR):
+            error_description = "CTR_DRBG - Read or write error in file";
+            break;
+#endif /* MBEDTLS_CTR_DRBG_C */
+
+#if defined(MBEDTLS_DES_C)
+        case -(MBEDTLS_ERR_DES_INVALID_INPUT_LENGTH):
+            error_description = "DES - The data input has an invalid length";
+            break;
+        case -(MBEDTLS_ERR_DES_HW_ACCEL_FAILED):
+            error_description = "DES - DES hardware accelerator failed";
+            break;
+#endif /* MBEDTLS_DES_C */
+
+#if defined(MBEDTLS_ENTROPY_C)
+        case -(MBEDTLS_ERR_ENTROPY_SOURCE_FAILED):
+            error_description = "ENTROPY - Critical entropy source failure";
+            break;
+        case -(MBEDTLS_ERR_ENTROPY_MAX_SOURCES):
+            error_description = "ENTROPY - No more sources can be added";
+            break;
+        case -(MBEDTLS_ERR_ENTROPY_NO_SOURCES_DEFINED):
+            error_description = "ENTROPY - No sources have been added to poll";
+            break;
+        case -(MBEDTLS_ERR_ENTROPY_NO_STRONG_SOURCE):
+            error_description = "ENTROPY - No strong sources have been added to poll";
+            break;
+        case -(MBEDTLS_ERR_ENTROPY_FILE_IO_ERROR):
+            error_description = "ENTROPY - Read/write error in file";
+            break;
+#endif /* MBEDTLS_ENTROPY_C */
+
+#if defined(MBEDTLS_ERROR_C)
+        case -(MBEDTLS_ERR_ERROR_GENERIC_ERROR):
+            error_description = "ERROR - Generic error";
+            break;
+        case -(MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED):
+            error_description = "ERROR - This is a bug in the library";
+            break;
+#endif /* MBEDTLS_ERROR_C */
+
+#if defined(MBEDTLS_GCM_C)
+        case -(MBEDTLS_ERR_GCM_AUTH_FAILED):
+            error_description = "GCM - Authenticated decryption failed";
+            break;
+        case -(MBEDTLS_ERR_GCM_HW_ACCEL_FAILED):
+            error_description = "GCM - GCM hardware accelerator failed";
+            break;
+        case -(MBEDTLS_ERR_GCM_BAD_INPUT):
+            error_description = "GCM - Bad input parameters to function";
+            break;
+#endif /* MBEDTLS_GCM_C */
+
+#if defined(MBEDTLS_HKDF_C)
+        case -(MBEDTLS_ERR_HKDF_BAD_INPUT_DATA):
+            error_description = "HKDF - Bad input parameters to function";
+            break;
+#endif /* MBEDTLS_HKDF_C */
+
+#if defined(MBEDTLS_HMAC_DRBG_C)
+        case -(MBEDTLS_ERR_HMAC_DRBG_REQUEST_TOO_BIG):
+            error_description = "HMAC_DRBG - Too many random requested in single call";
+            break;
+        case -(MBEDTLS_ERR_HMAC_DRBG_INPUT_TOO_BIG):
+            error_description = "HMAC_DRBG - Input too large (Entropy + additional)";
+            break;
+        case -(MBEDTLS_ERR_HMAC_DRBG_FILE_IO_ERROR):
+            error_description = "HMAC_DRBG - Read/write error in file";
+            break;
+        case -(MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED):
+            error_description = "HMAC_DRBG - The entropy source failed";
+            break;
+#endif /* MBEDTLS_HMAC_DRBG_C */
+
+#if defined(MBEDTLS_MD2_C)
+        case -(MBEDTLS_ERR_MD2_HW_ACCEL_FAILED):
+            error_description = "MD2 - MD2 hardware accelerator failed";
+            break;
+#endif /* MBEDTLS_MD2_C */
+
+#if defined(MBEDTLS_MD4_C)
+        case -(MBEDTLS_ERR_MD4_HW_ACCEL_FAILED):
+            error_description = "MD4 - MD4 hardware accelerator failed";
+            break;
+#endif /* MBEDTLS_MD4_C */
+
+#if defined(MBEDTLS_MD5_C)
+        case -(MBEDTLS_ERR_MD5_HW_ACCEL_FAILED):
+            error_description = "MD5 - MD5 hardware accelerator failed";
+            break;
+#endif /* MBEDTLS_MD5_C */
+
+#if defined(MBEDTLS_NET_C)
+        case -(MBEDTLS_ERR_NET_SOCKET_FAILED):
+            error_description = "NET - Failed to open a socket";
+            break;
+        case -(MBEDTLS_ERR_NET_CONNECT_FAILED):
+            error_description = "NET - The connection to the given server / port failed";
+            break;
+        case -(MBEDTLS_ERR_NET_BIND_FAILED):
+            error_description = "NET - Binding of the socket failed";
+            break;
+        case -(MBEDTLS_ERR_NET_LISTEN_FAILED):
+            error_description = "NET - Could not listen on the socket";
+            break;
+        case -(MBEDTLS_ERR_NET_ACCEPT_FAILED):
+            error_description = "NET - Could not accept the incoming connection";
+            break;
+        case -(MBEDTLS_ERR_NET_RECV_FAILED):
+            error_description = "NET - Reading information from the socket failed";
+            break;
+        case -(MBEDTLS_ERR_NET_SEND_FAILED):
+            error_description = "NET - Sending information through the socket failed";
+            break;
+        case -(MBEDTLS_ERR_NET_CONN_RESET):
+            error_description = "NET - Connection was reset by peer";
+            break;
+        case -(MBEDTLS_ERR_NET_UNKNOWN_HOST):
+            error_description = "NET - Failed to get an IP address for the given hostname";
+            break;
+        case -(MBEDTLS_ERR_NET_BUFFER_TOO_SMALL):
+            error_description = "NET - Buffer is too small to hold the data";
+            break;
+        case -(MBEDTLS_ERR_NET_INVALID_CONTEXT):
+            error_description = "NET - The context is invalid, eg because it was free()ed";
+            break;
+        case -(MBEDTLS_ERR_NET_POLL_FAILED):
+            error_description = "NET - Polling the net context failed";
+            break;
+        case -(MBEDTLS_ERR_NET_BAD_INPUT_DATA):
+            error_description = "NET - Input invalid";
+            break;
+#endif /* MBEDTLS_NET_C */
+
+#if defined(MBEDTLS_OID_C)
+        case -(MBEDTLS_ERR_OID_NOT_FOUND):
+            error_description = "OID - OID is not found";
+            break;
+        case -(MBEDTLS_ERR_OID_BUF_TOO_SMALL):
+            error_description = "OID - output buffer is too small";
+            break;
+#endif /* MBEDTLS_OID_C */
+
+#if defined(MBEDTLS_PADLOCK_C)
+        case -(MBEDTLS_ERR_PADLOCK_DATA_MISALIGNED):
+            error_description = "PADLOCK - Input data should be aligned";
+            break;
+#endif /* MBEDTLS_PADLOCK_C */
+
+#if defined(MBEDTLS_PLATFORM_C)
+        case -(MBEDTLS_ERR_PLATFORM_HW_ACCEL_FAILED):
+            error_description = "PLATFORM - Hardware accelerator failed";
+            break;
+        case -(MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED):
+            error_description = "PLATFORM - The requested feature is not supported by the platform";
+            break;
+#endif /* MBEDTLS_PLATFORM_C */
+
+#if defined(MBEDTLS_POLY1305_C)
+        case -(MBEDTLS_ERR_POLY1305_BAD_INPUT_DATA):
+            error_description = "POLY1305 - Invalid input parameter(s)";
+            break;
+        case -(MBEDTLS_ERR_POLY1305_FEATURE_UNAVAILABLE):
+            error_description = "POLY1305 - Feature not available. For example, s part of the API is not implemented";
+            break;
+        case -(MBEDTLS_ERR_POLY1305_HW_ACCEL_FAILED):
+            error_description = "POLY1305 - Poly1305 hardware accelerator failed";
+            break;
+#endif /* MBEDTLS_POLY1305_C */
+
+#if defined(MBEDTLS_RIPEMD160_C)
+        case -(MBEDTLS_ERR_RIPEMD160_HW_ACCEL_FAILED):
+            error_description = "RIPEMD160 - RIPEMD160 hardware accelerator failed";
+            break;
+#endif /* MBEDTLS_RIPEMD160_C */
+
+#if defined(MBEDTLS_SHA1_C)
+        case -(MBEDTLS_ERR_SHA1_HW_ACCEL_FAILED):
+            error_description = "SHA1 - SHA-1 hardware accelerator failed";
+            break;
+        case -(MBEDTLS_ERR_SHA1_BAD_INPUT_DATA):
+            error_description = "SHA1 - SHA-1 input data was malformed";
+            break;
+#endif /* MBEDTLS_SHA1_C */
+
+#if defined(MBEDTLS_SHA256_C)
+        case -(MBEDTLS_ERR_SHA256_HW_ACCEL_FAILED):
+            error_description = "SHA256 - SHA-256 hardware accelerator failed";
+            break;
+        case -(MBEDTLS_ERR_SHA256_BAD_INPUT_DATA):
+            error_description = "SHA256 - SHA-256 input data was malformed";
+            break;
+#endif /* MBEDTLS_SHA256_C */
+
+#if defined(MBEDTLS_SHA512_C)
+        case -(MBEDTLS_ERR_SHA512_HW_ACCEL_FAILED):
+            error_description = "SHA512 - SHA-512 hardware accelerator failed";
+            break;
+        case -(MBEDTLS_ERR_SHA512_BAD_INPUT_DATA):
+            error_description = "SHA512 - SHA-512 input data was malformed";
+            break;
+#endif /* MBEDTLS_SHA512_C */
+
+#if defined(MBEDTLS_THREADING_C)
+        case -(MBEDTLS_ERR_THREADING_FEATURE_UNAVAILABLE):
+            error_description = "THREADING - The selected feature is not available";
+            break;
+        case -(MBEDTLS_ERR_THREADING_BAD_INPUT_DATA):
+            error_description = "THREADING - Bad input parameters to function";
+            break;
+        case -(MBEDTLS_ERR_THREADING_MUTEX_ERROR):
+            error_description = "THREADING - Locking / unlocking / free failed with error code";
+            break;
+#endif /* MBEDTLS_THREADING_C */
+
+#if defined(MBEDTLS_XTEA_C)
+        case -(MBEDTLS_ERR_XTEA_INVALID_INPUT_LENGTH):
+            error_description = "XTEA - The data input has an invalid length";
+            break;
+        case -(MBEDTLS_ERR_XTEA_HW_ACCEL_FAILED):
+            error_description = "XTEA - XTEA hardware accelerator failed";
+            break;
+#endif /* MBEDTLS_XTEA_C */
+
+        default:
+            break;
     }
 
     return error_description;
@@ -675,10 +1157,12 @@
         else
             mbedtls_snprintf( buf, buflen, "%s", high_level_error_description );
 
+#if defined(MBEDTLS_SSL_TLS_C)
         // Early return in case of a fatal error - do not try to translate low
         // level code.
         if(use_ret == -(MBEDTLS_ERR_SSL_FATAL_ALERT_MESSAGE))
             return;
+#endif /* MBEDTLS_SSL_TLS_C */
     }
 
     use_ret = ret & ~0xFF80;