diff --git a/tests/ssl-opt.sh b/tests/ssl-opt.sh
index ec6b8fe..2aa2657 100755
--- a/tests/ssl-opt.sh
+++ b/tests/ssl-opt.sh
@@ -1192,6 +1192,7 @@
 }
 
 run_test_psa() {
+    requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
     requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
     run_test    "PSA-supported ciphersuite: $1" \
                 "$P_SRV debug_level=3 force_version=tls12" \
@@ -1211,6 +1212,7 @@
 }
 
 run_test_psa_force_curve() {
+    requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
     requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
     run_test    "PSA - ECDH with $1" \
                 "$P_SRV debug_level=4 force_version=tls12 curves=$1" \
@@ -1445,6 +1447,7 @@
 # - things work with all ciphersuites active (used with config-full in all.sh)
 # - the expected parameters are selected
 #   ("signature_algorithm ext: 6" means SHA-512 (highest common hash))
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Default" \
             "$P_SRV debug_level=3" \
             "$P_CLI" \
@@ -1456,6 +1459,7 @@
             -S "error" \
             -C "error"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Default, DTLS" \
             "$P_SRV dtls=1" \
             "$P_CLI dtls=1" \
@@ -1463,12 +1467,14 @@
             -s "Protocol is DTLSv1.2" \
             -s "Ciphersuite is TLS-ECDHE-RSA-WITH-CHACHA20-POLY1305-SHA256"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "TLS client auth: required" \
             "$P_SRV auth_mode=required" \
             "$P_CLI" \
             0 \
             -s "Verifying peer X.509 certificate... ok"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "key size: TLS-ECDHE-ECDSA-WITH-CHACHA20-POLY1305-SHA256" \
             "$P_SRV" \
             "$P_CLI force_ciphersuite=TLS-ECDHE-ECDSA-WITH-CHACHA20-POLY1305-SHA256" \
@@ -1476,6 +1482,7 @@
             -c "Ciphersuite is TLS-ECDHE-ECDSA-WITH-CHACHA20-POLY1305-SHA256" \
             -c "Key size is 256"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "key size: TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8" \
             "$P_SRV" \
             "$P_CLI force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8" \
@@ -1483,6 +1490,7 @@
             -c "Ciphersuite is TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8" \
             -c "Key size is 128"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_X509_CRT_PARSE_C
 requires_config_enabled MBEDTLS_ECDSA_C
 requires_config_enabled MBEDTLS_SHA256_C
@@ -1491,6 +1499,7 @@
             "$P_CLI crt_file=data_files/server5.crt key_file=data_files/server5.key.enc key_pwd=PolarSSLTest" \
             0
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_X509_CRT_PARSE_C
 requires_config_enabled MBEDTLS_ECDSA_C
 requires_config_enabled MBEDTLS_SHA256_C
@@ -1499,6 +1508,7 @@
             "$P_CLI" \
             0
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_X509_CRT_PARSE_C
 requires_config_enabled MBEDTLS_ECDSA_C
 requires_config_enabled MBEDTLS_RSA_C
@@ -1510,6 +1520,7 @@
             "$P_CLI" \
             0
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
 run_test    "CA callback on client" \
             "$P_SRV debug_level=3" \
@@ -1519,6 +1530,7 @@
             -S "error" \
             -C "error"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
 requires_config_enabled MBEDTLS_X509_CRT_PARSE_C
 requires_config_enabled MBEDTLS_ECDSA_C
@@ -1534,6 +1546,7 @@
             -C "error"
 
 # Test using an opaque private key for client authentication
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
 requires_config_enabled MBEDTLS_X509_CRT_PARSE_C
 requires_config_enabled MBEDTLS_ECDSA_C
@@ -1552,6 +1565,7 @@
             -C "error"
 
 # Test using an opaque private key for server authentication
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
 requires_config_enabled MBEDTLS_X509_CRT_PARSE_C
 requires_config_enabled MBEDTLS_ECDSA_C
@@ -1570,6 +1584,7 @@
             -C "error"
 
 # Test using an opaque private key for client/server authentication
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
 requires_config_enabled MBEDTLS_X509_CRT_PARSE_C
 requires_config_enabled MBEDTLS_ECDSA_C
@@ -1630,6 +1645,7 @@
 run_test_psa_force_curve "secp192k1"
 
 # Test current time in ServerHello
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_HAVE_TIME
 run_test    "ServerHello contains gmt_unix_time" \
             "$P_SRV debug_level=3" \
@@ -1639,6 +1655,7 @@
             -F "check_server_hello_time"
 
 # Test for uniqueness of IVs in AEAD ciphersuites
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Unique IV in GCM" \
             "$P_SRV exchanges=20 debug_level=4" \
             "$P_CLI exchanges=20 debug_level=4 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-256-GCM-SHA384" \
@@ -1647,6 +1664,7 @@
             -U "IV used"
 
 # Tests for certificate verification callback
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Configuration-specific CRT verification callback" \
             "$P_SRV debug_level=3" \
             "$P_CLI context_crt_cb=0 debug_level=3" \
@@ -1657,6 +1675,7 @@
             -C "Use context-specific verification callback" \
             -C "error"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Context-specific CRT verification callback" \
             "$P_SRV debug_level=3" \
             "$P_CLI context_crt_cb=1 debug_level=3" \
@@ -1668,33 +1687,39 @@
             -C "error"
 
 # Tests for SHA-1 support
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SHA-1 forbidden by default in server certificate" \
             "$P_SRV key_file=data_files/server2.key crt_file=data_files/server2.crt" \
             "$P_CLI debug_level=2 allow_sha1=0" \
             1 \
             -c "The certificate is signed with an unacceptable hash"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SHA-1 explicitly allowed in server certificate" \
             "$P_SRV key_file=data_files/server2.key crt_file=data_files/server2.crt" \
             "$P_CLI allow_sha1=1" \
             0
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SHA-256 allowed by default in server certificate" \
             "$P_SRV key_file=data_files/server2.key crt_file=data_files/server2-sha256.crt" \
             "$P_CLI allow_sha1=0" \
             0
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SHA-1 forbidden by default in client certificate" \
             "$P_SRV auth_mode=required allow_sha1=0" \
             "$P_CLI key_file=data_files/cli-rsa.key crt_file=data_files/cli-rsa-sha1.crt" \
             1 \
             -s "The certificate is signed with an unacceptable hash"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SHA-1 explicitly allowed in client certificate" \
             "$P_SRV auth_mode=required allow_sha1=1" \
             "$P_CLI key_file=data_files/cli-rsa.key crt_file=data_files/cli-rsa-sha1.crt" \
             0
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SHA-256 allowed by default in client certificate" \
             "$P_SRV auth_mode=required allow_sha1=0" \
             "$P_CLI key_file=data_files/cli-rsa.key crt_file=data_files/cli-rsa-sha256.crt" \
@@ -1741,6 +1766,7 @@
             0
 
 # Tests for datagram packing
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS: multiple records in same datagram, client and server" \
             "$P_SRV dtls=1 dgram_packing=1 debug_level=2" \
             "$P_CLI dtls=1 dgram_packing=1 debug_level=2" \
@@ -1748,6 +1774,7 @@
             -c "next record in same datagram" \
             -s "next record in same datagram"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS: multiple records in same datagram, client only" \
             "$P_SRV dtls=1 dgram_packing=0 debug_level=2" \
             "$P_CLI dtls=1 dgram_packing=1 debug_level=2" \
@@ -1755,6 +1782,7 @@
             -s "next record in same datagram" \
             -C "next record in same datagram"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS: multiple records in same datagram, server only" \
             "$P_SRV dtls=1 dgram_packing=1 debug_level=2" \
             "$P_CLI dtls=1 dgram_packing=0 debug_level=2" \
@@ -1762,6 +1790,7 @@
             -S "next record in same datagram" \
             -c "next record in same datagram"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS: multiple records in same datagram, neither client nor server" \
             "$P_SRV dtls=1 dgram_packing=0 debug_level=2" \
             "$P_CLI dtls=1 dgram_packing=0 debug_level=2" \
@@ -1771,6 +1800,7 @@
 
 # Tests for Context serialization
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 run_test    "Context serialization, client serializes, CCM" \
             "$P_SRV dtls=1 serialize=0 exchanges=2" \
@@ -1779,6 +1809,7 @@
             -c "Deserializing connection..." \
             -S "Deserializing connection..."
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 run_test    "Context serialization, client serializes, ChaChaPoly" \
             "$P_SRV dtls=1 serialize=0 exchanges=2" \
@@ -1787,6 +1818,7 @@
             -c "Deserializing connection..." \
             -S "Deserializing connection..."
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 run_test    "Context serialization, client serializes, GCM" \
             "$P_SRV dtls=1 serialize=0 exchanges=2" \
@@ -1795,6 +1827,7 @@
             -c "Deserializing connection..." \
             -S "Deserializing connection..."
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 run_test    "Context serialization, client serializes, with CID" \
@@ -1804,6 +1837,7 @@
             -c "Deserializing connection..." \
             -S "Deserializing connection..."
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 run_test    "Context serialization, server serializes, CCM" \
             "$P_SRV dtls=1 serialize=1 exchanges=2" \
@@ -1812,6 +1846,7 @@
             -C "Deserializing connection..." \
             -s "Deserializing connection..."
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 run_test    "Context serialization, server serializes, ChaChaPoly" \
             "$P_SRV dtls=1 serialize=1 exchanges=2" \
@@ -1820,6 +1855,7 @@
             -C "Deserializing connection..." \
             -s "Deserializing connection..."
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 run_test    "Context serialization, server serializes, GCM" \
             "$P_SRV dtls=1 serialize=1 exchanges=2" \
@@ -1828,6 +1864,7 @@
             -C "Deserializing connection..." \
             -s "Deserializing connection..."
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 run_test    "Context serialization, server serializes, with CID" \
@@ -1837,6 +1874,7 @@
             -C "Deserializing connection..." \
             -s "Deserializing connection..."
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 run_test    "Context serialization, both serialize, CCM" \
             "$P_SRV dtls=1 serialize=1 exchanges=2" \
@@ -1845,6 +1883,7 @@
             -c "Deserializing connection..." \
             -s "Deserializing connection..."
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 run_test    "Context serialization, both serialize, ChaChaPoly" \
             "$P_SRV dtls=1 serialize=1 exchanges=2" \
@@ -1853,6 +1892,7 @@
             -c "Deserializing connection..." \
             -s "Deserializing connection..."
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 run_test    "Context serialization, both serialize, GCM" \
             "$P_SRV dtls=1 serialize=1 exchanges=2" \
@@ -1861,6 +1901,7 @@
             -c "Deserializing connection..." \
             -s "Deserializing connection..."
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 run_test    "Context serialization, both serialize, with CID" \
@@ -1870,6 +1911,7 @@
             -c "Deserializing connection..." \
             -s "Deserializing connection..."
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 run_test    "Context serialization, re-init, client serializes, CCM" \
             "$P_SRV dtls=1 serialize=0 exchanges=2" \
@@ -1878,6 +1920,7 @@
             -c "Deserializing connection..." \
             -S "Deserializing connection..."
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 run_test    "Context serialization, re-init, client serializes, ChaChaPoly" \
             "$P_SRV dtls=1 serialize=0 exchanges=2" \
@@ -1886,6 +1929,7 @@
             -c "Deserializing connection..." \
             -S "Deserializing connection..."
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 run_test    "Context serialization, re-init, client serializes, GCM" \
             "$P_SRV dtls=1 serialize=0 exchanges=2" \
@@ -1894,6 +1938,7 @@
             -c "Deserializing connection..." \
             -S "Deserializing connection..."
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 run_test    "Context serialization, re-init, client serializes, with CID" \
@@ -1903,6 +1948,7 @@
             -c "Deserializing connection..." \
             -S "Deserializing connection..."
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 run_test    "Context serialization, re-init, server serializes, CCM" \
             "$P_SRV dtls=1 serialize=2 exchanges=2" \
@@ -1911,6 +1957,7 @@
             -C "Deserializing connection..." \
             -s "Deserializing connection..."
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 run_test    "Context serialization, re-init, server serializes, ChaChaPoly" \
             "$P_SRV dtls=1 serialize=2 exchanges=2" \
@@ -1919,6 +1966,7 @@
             -C "Deserializing connection..." \
             -s "Deserializing connection..."
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 run_test    "Context serialization, re-init, server serializes, GCM" \
             "$P_SRV dtls=1 serialize=2 exchanges=2" \
@@ -1927,6 +1975,7 @@
             -C "Deserializing connection..." \
             -s "Deserializing connection..."
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 run_test    "Context serialization, re-init, server serializes, with CID" \
@@ -1936,6 +1985,7 @@
             -C "Deserializing connection..." \
             -s "Deserializing connection..."
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 run_test    "Context serialization, re-init, both serialize, CCM" \
             "$P_SRV dtls=1 serialize=2 exchanges=2" \
@@ -1944,6 +1994,7 @@
             -c "Deserializing connection..." \
             -s "Deserializing connection..."
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 run_test    "Context serialization, re-init, both serialize, ChaChaPoly" \
             "$P_SRV dtls=1 serialize=2 exchanges=2" \
@@ -1952,6 +2003,7 @@
             -c "Deserializing connection..." \
             -s "Deserializing connection..."
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 run_test    "Context serialization, re-init, both serialize, GCM" \
             "$P_SRV dtls=1 serialize=2 exchanges=2" \
@@ -1960,6 +2012,7 @@
             -c "Deserializing connection..." \
             -s "Deserializing connection..."
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 run_test    "Context serialization, re-init, both serialize, with CID" \
@@ -1969,6 +2022,7 @@
             -c "Deserializing connection..." \
             -s "Deserializing connection..."
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_CONTEXT_SERIALIZATION
 run_test    "Saving the serialized context to a file" \
             "$P_SRV dtls=1 serialize=1 context_file=context_srv.txt" \
@@ -1985,6 +2039,7 @@
 # grep for output witnessing its use. This needs to be
 # changed once the CID extension is implemented.
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 run_test    "Connection ID: Cli enabled, Srv disabled" \
             "$P_SRV debug_level=3 dtls=1 cid=0" \
@@ -2001,6 +2056,7 @@
             -C "Copy CIDs into SSL transform" \
             -c "Use of Connection ID was rejected by the server"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 run_test    "Connection ID: Cli disabled, Srv enabled" \
             "$P_SRV debug_level=3 dtls=1 cid=1 cid_val=deadbeef" \
@@ -2016,6 +2072,7 @@
             -C "Copy CIDs into SSL transform"  \
             -s "Use of Connection ID was not offered by client"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 run_test    "Connection ID: Cli+Srv enabled, Cli+Srv CID nonempty" \
             "$P_SRV debug_level=3 dtls=1 cid=1 cid_val=dead" \
@@ -2036,6 +2093,7 @@
             -s "Use of Connection ID has been negotiated" \
             -c "Use of Connection ID has been negotiated"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 run_test    "Connection ID, 3D: Cli+Srv enabled, Cli+Srv CID nonempty" \
             -p "$P_PXY drop=5 delay=5 duplicate=5 bad_cid=1" \
@@ -2059,6 +2117,7 @@
             -c "ignoring unexpected CID" \
             -s "ignoring unexpected CID"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 run_test    "Connection ID, MTU: Cli+Srv enabled, Cli+Srv CID nonempty" \
             -p "$P_PXY mtu=800" \
@@ -2080,6 +2139,7 @@
             -s "Use of Connection ID has been negotiated" \
             -c "Use of Connection ID has been negotiated"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 run_test    "Connection ID, 3D+MTU: Cli+Srv enabled, Cli+Srv CID nonempty" \
             -p "$P_PXY mtu=800 drop=5 delay=5 duplicate=5 bad_cid=1" \
@@ -2103,6 +2163,7 @@
             -c "ignoring unexpected CID" \
             -s "ignoring unexpected CID"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 run_test    "Connection ID: Cli+Srv enabled, Cli CID empty" \
             "$P_SRV debug_level=3 dtls=1 cid=1 cid_val=deadbeef" \
@@ -2123,6 +2184,7 @@
             -s "Use of Connection ID has been negotiated" \
             -c "Use of Connection ID has been negotiated"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 run_test    "Connection ID: Cli+Srv enabled, Srv CID empty" \
             "$P_SRV debug_level=3 dtls=1 cid=1" \
@@ -2143,6 +2205,7 @@
             -s "Use of Connection ID has been negotiated" \
             -c "Use of Connection ID has been negotiated"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 run_test    "Connection ID: Cli+Srv enabled, Cli+Srv CID empty" \
             "$P_SRV debug_level=3 dtls=1 cid=1" \
@@ -2161,6 +2224,7 @@
             -S "Use of Connection ID has been negotiated" \
             -C "Use of Connection ID has been negotiated"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 run_test    "Connection ID: Cli+Srv enabled, Cli+Srv CID nonempty, AES-128-CCM-8" \
             "$P_SRV debug_level=3 dtls=1 cid=1 cid_val=dead" \
@@ -2181,6 +2245,7 @@
             -s "Use of Connection ID has been negotiated" \
             -c "Use of Connection ID has been negotiated"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 run_test    "Connection ID: Cli+Srv enabled, Cli CID empty, AES-128-CCM-8" \
             "$P_SRV debug_level=3 dtls=1 cid=1 cid_val=deadbeef" \
@@ -2201,6 +2266,7 @@
             -s "Use of Connection ID has been negotiated" \
             -c "Use of Connection ID has been negotiated"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 run_test    "Connection ID: Cli+Srv enabled, Srv CID empty, AES-128-CCM-8" \
             "$P_SRV debug_level=3 dtls=1 cid=1" \
@@ -2221,6 +2287,7 @@
             -s "Use of Connection ID has been negotiated" \
             -c "Use of Connection ID has been negotiated"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 run_test    "Connection ID: Cli+Srv enabled, Cli+Srv CID empty, AES-128-CCM-8" \
             "$P_SRV debug_level=3 dtls=1 cid=1" \
@@ -2239,6 +2306,7 @@
             -S "Use of Connection ID has been negotiated" \
             -C "Use of Connection ID has been negotiated"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 run_test    "Connection ID: Cli+Srv enabled, Cli+Srv CID nonempty, AES-128-CBC" \
             "$P_SRV debug_level=3 dtls=1 cid=1 cid_val=dead" \
@@ -2259,6 +2327,7 @@
             -s "Use of Connection ID has been negotiated" \
             -c "Use of Connection ID has been negotiated"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 run_test    "Connection ID: Cli+Srv enabled, Cli CID empty, AES-128-CBC" \
             "$P_SRV debug_level=3 dtls=1 cid=1 cid_val=deadbeef" \
@@ -2279,6 +2348,7 @@
             -s "Use of Connection ID has been negotiated" \
             -c "Use of Connection ID has been negotiated"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 run_test    "Connection ID: Cli+Srv enabled, Srv CID empty, AES-128-CBC" \
             "$P_SRV debug_level=3 dtls=1 cid=1" \
@@ -2299,6 +2369,7 @@
             -s "Use of Connection ID has been negotiated" \
             -c "Use of Connection ID has been negotiated"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 run_test    "Connection ID: Cli+Srv enabled, Cli+Srv CID empty, AES-128-CBC" \
             "$P_SRV debug_level=3 dtls=1 cid=1" \
@@ -2317,6 +2388,7 @@
             -S "Use of Connection ID has been negotiated" \
             -C "Use of Connection ID has been negotiated"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
 run_test    "Connection ID: Cli+Srv enabled, renegotiate without change of CID" \
@@ -2332,6 +2404,7 @@
             -s "(after renegotiation) Use of Connection ID has been negotiated" \
             -c "(after renegotiation) Use of Connection ID has been negotiated"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
 run_test    "Connection ID: Cli+Srv enabled, renegotiate with different CID" \
@@ -2347,6 +2420,7 @@
             -s "(after renegotiation) Use of Connection ID has been negotiated" \
             -c "(after renegotiation) Use of Connection ID has been negotiated"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
 run_test    "Connection ID, no packing: Cli+Srv enabled, renegotiate with different CID" \
@@ -2362,6 +2436,7 @@
             -s "(after renegotiation) Use of Connection ID has been negotiated" \
             -c "(after renegotiation) Use of Connection ID has been negotiated"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
 run_test    "Connection ID, 3D+MTU: Cli+Srv enabled, renegotiate with different CID" \
@@ -2380,6 +2455,7 @@
             -c "ignoring unexpected CID" \
             -s "ignoring unexpected CID"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
 run_test    "Connection ID: Cli+Srv enabled, renegotiate without CID" \
@@ -2395,6 +2471,7 @@
             -C "(after renegotiation) Use of Connection ID has been negotiated" \
             -S "(after renegotiation) Use of Connection ID has been negotiated"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
 run_test    "Connection ID, no packing: Cli+Srv enabled, renegotiate without CID" \
@@ -2410,6 +2487,7 @@
             -C "(after renegotiation) Use of Connection ID has been negotiated" \
             -S "(after renegotiation) Use of Connection ID has been negotiated"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
 run_test    "Connection ID, 3D+MTU: Cli+Srv enabled, renegotiate without CID" \
@@ -2428,6 +2506,7 @@
             -c "ignoring unexpected CID" \
             -s "ignoring unexpected CID"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
 run_test    "Connection ID: Cli+Srv enabled, CID on renegotiation" \
@@ -2441,6 +2520,7 @@
             -c "(after renegotiation) Use of Connection ID has been negotiated" \
             -s "(after renegotiation) Use of Connection ID has been negotiated"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
 run_test    "Connection ID, no packing: Cli+Srv enabled, CID on renegotiation" \
@@ -2454,6 +2534,7 @@
             -c "(after renegotiation) Use of Connection ID has been negotiated" \
             -s "(after renegotiation) Use of Connection ID has been negotiated"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
 run_test    "Connection ID, 3D+MTU: Cli+Srv enabled, CID on renegotiation" \
@@ -2470,6 +2551,7 @@
             -c "ignoring unexpected CID" \
             -s "ignoring unexpected CID"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
 run_test    "Connection ID: Cli+Srv enabled, Cli disables on renegotiation" \
@@ -2486,6 +2568,7 @@
             -S "(after renegotiation) Use of Connection ID has been negotiated" \
             -s "(after renegotiation) Use of Connection ID was not offered by client"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
 run_test    "Connection ID, 3D: Cli+Srv enabled, Cli disables on renegotiation" \
@@ -2505,6 +2588,7 @@
             -c "ignoring unexpected CID" \
             -s "ignoring unexpected CID"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
 run_test    "Connection ID: Cli+Srv enabled, Srv disables on renegotiation" \
@@ -2521,6 +2605,7 @@
             -S "(after renegotiation) Use of Connection ID has been negotiated" \
             -c "(after renegotiation) Use of Connection ID was rejected by the server"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
 run_test    "Connection ID, 3D: Cli+Srv enabled, Srv disables on renegotiation" \
@@ -2543,6 +2628,7 @@
 # This and the test below it require MAX_CONTENT_LEN to be at least MFL+1, because the
 # tests check that the buffer contents are reallocated when the message is
 # larger than the buffer.
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 requires_config_enabled MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
 requires_max_content_len 513
@@ -2557,6 +2643,7 @@
             -s "Reallocating in_buf" \
             -s "Reallocating out_buf"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_SSL_DTLS_CONNECTION_ID
 requires_config_enabled MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
 requires_max_content_len 1025
@@ -2573,6 +2660,7 @@
 
 # Tests for Encrypt-then-MAC extension
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Encrypt then MAC: default" \
             "$P_SRV debug_level=3 \
              force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
@@ -2585,6 +2673,7 @@
             -c "using encrypt then mac" \
             -s "using encrypt then mac"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Encrypt then MAC: client enabled, server disabled" \
             "$P_SRV debug_level=3 etm=0 \
              force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
@@ -2597,6 +2686,7 @@
             -C "using encrypt then mac" \
             -S "using encrypt then mac"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Encrypt then MAC: client enabled, aead cipher" \
             "$P_SRV debug_level=3 etm=1 \
              force_ciphersuite=TLS-RSA-WITH-AES-128-GCM-SHA256" \
@@ -2609,6 +2699,7 @@
             -C "using encrypt then mac" \
             -S "using encrypt then mac"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Encrypt then MAC: client disabled, server enabled" \
             "$P_SRV debug_level=3 etm=1 \
              force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
@@ -2623,6 +2714,7 @@
 
 # Tests for Extended Master Secret extension
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Extended Master Secret: default" \
             "$P_SRV debug_level=3" \
             "$P_CLI debug_level=3" \
@@ -2634,6 +2726,7 @@
             -c "session hash for extended master secret" \
             -s "session hash for extended master secret"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Extended Master Secret: client enabled, server disabled" \
             "$P_SRV debug_level=3 extended_ms=0" \
             "$P_CLI debug_level=3 extended_ms=1" \
@@ -2645,6 +2738,7 @@
             -C "session hash for extended master secret" \
             -S "session hash for extended master secret"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Extended Master Secret: client disabled, server enabled" \
             "$P_SRV debug_level=3 extended_ms=1" \
             "$P_CLI debug_level=3 extended_ms=0" \
@@ -2658,6 +2752,7 @@
 
 # Test sending and receiving empty application data records
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Encrypt then MAC: empty application data record" \
             "$P_SRV auth_mode=none debug_level=4 etm=1" \
             "$P_CLI auth_mode=none etm=1 request_size=0 force_ciphersuite=TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA" \
@@ -2666,6 +2761,7 @@
             -s "dumping 'input payload after decrypt' (0 bytes)" \
             -c "0 bytes written in 1 fragments"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Encrypt then MAC: disabled, empty application data record" \
             "$P_SRV auth_mode=none debug_level=4 etm=0" \
             "$P_CLI auth_mode=none etm=0 request_size=0" \
@@ -2673,6 +2769,7 @@
             -s "dumping 'input payload after decrypt' (0 bytes)" \
             -c "0 bytes written in 1 fragments"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Encrypt then MAC, DTLS: empty application data record" \
             "$P_SRV auth_mode=none debug_level=4 etm=1 dtls=1" \
             "$P_CLI auth_mode=none etm=1 request_size=0 force_ciphersuite=TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA dtls=1" \
@@ -2681,6 +2778,7 @@
             -s "dumping 'input payload after decrypt' (0 bytes)" \
             -c "0 bytes written in 1 fragments"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Encrypt then MAC, DTLS: disabled, empty application data record" \
             "$P_SRV auth_mode=none debug_level=4 etm=0 dtls=1" \
             "$P_CLI auth_mode=none etm=0 request_size=0 dtls=1" \
@@ -2690,6 +2788,7 @@
 
 # Tests for CBC 1/n-1 record splitting
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "CBC Record splitting: TLS 1.2, no splitting" \
             "$P_SRV" \
             "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
@@ -2701,6 +2800,7 @@
 
 # Tests for Session Tickets
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets: basic" \
             "$P_SRV debug_level=3 tickets=1" \
             "$P_CLI debug_level=3 tickets=1 reconnect=1" \
@@ -2730,6 +2830,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets: cache disabled" \
             "$P_SRV debug_level=3 tickets=1 cache_max=0" \
             "$P_CLI debug_level=3 tickets=1 reconnect=1" \
@@ -2744,6 +2845,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets: timeout" \
             "$P_SRV debug_level=3 tickets=1 cache_max=0 ticket_timeout=1" \
             "$P_CLI debug_level=3 tickets=1 reconnect=1 reco_delay=2" \
@@ -2758,6 +2860,7 @@
             -S "a session has been resumed" \
             -C "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets: session copy" \
             "$P_SRV debug_level=3 tickets=1 cache_max=0" \
             "$P_CLI debug_level=3 tickets=1 reconnect=1 reco_mode=0" \
@@ -2772,6 +2875,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets: openssl server" \
             "$O_SRV" \
             "$P_CLI debug_level=3 tickets=1 reconnect=1" \
@@ -2781,6 +2885,7 @@
             -c "parse new session ticket" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets: openssl client" \
             "$P_SRV debug_level=3 tickets=1" \
             "( $O_CLI -sess_out $SESSION; \
@@ -2793,6 +2898,7 @@
             -s "session successfully restored from ticket" \
             -s "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets: AES-128-GCM" \
             "$P_SRV debug_level=3 tickets=1 ticket_aead=AES-128-GCM" \
             "$P_CLI debug_level=3 tickets=1 reconnect=1" \
@@ -2807,6 +2913,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets: AES-192-GCM" \
             "$P_SRV debug_level=3 tickets=1 ticket_aead=AES-192-GCM" \
             "$P_CLI debug_level=3 tickets=1 reconnect=1" \
@@ -2821,6 +2928,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets: AES-128-CCM" \
             "$P_SRV debug_level=3 tickets=1 ticket_aead=AES-128-CCM" \
             "$P_CLI debug_level=3 tickets=1 reconnect=1" \
@@ -2835,6 +2943,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets: AES-192-CCM" \
             "$P_SRV debug_level=3 tickets=1 ticket_aead=AES-192-CCM" \
             "$P_CLI debug_level=3 tickets=1 reconnect=1" \
@@ -2849,6 +2958,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets: AES-256-CCM" \
             "$P_SRV debug_level=3 tickets=1 ticket_aead=AES-256-CCM" \
             "$P_CLI debug_level=3 tickets=1 reconnect=1" \
@@ -2863,6 +2973,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets: CAMELLIA-128-CCM" \
             "$P_SRV debug_level=3 tickets=1 ticket_aead=CAMELLIA-128-CCM" \
             "$P_CLI debug_level=3 tickets=1 reconnect=1" \
@@ -2877,6 +2988,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets: CAMELLIA-192-CCM" \
             "$P_SRV debug_level=3 tickets=1 ticket_aead=CAMELLIA-192-CCM" \
             "$P_CLI debug_level=3 tickets=1 reconnect=1" \
@@ -2891,6 +3003,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets: CAMELLIA-256-CCM" \
             "$P_SRV debug_level=3 tickets=1 ticket_aead=CAMELLIA-256-CCM" \
             "$P_CLI debug_level=3 tickets=1 reconnect=1" \
@@ -2905,6 +3018,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets: ARIA-128-GCM" \
             "$P_SRV debug_level=3 tickets=1 ticket_aead=ARIA-128-GCM" \
             "$P_CLI debug_level=3 tickets=1 reconnect=1" \
@@ -2919,6 +3033,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets: ARIA-192-GCM" \
             "$P_SRV debug_level=3 tickets=1 ticket_aead=ARIA-192-GCM" \
             "$P_CLI debug_level=3 tickets=1 reconnect=1" \
@@ -2933,6 +3048,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets: ARIA-256-GCM" \
             "$P_SRV debug_level=3 tickets=1 ticket_aead=ARIA-256-GCM" \
             "$P_CLI debug_level=3 tickets=1 reconnect=1" \
@@ -2947,6 +3063,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets: ARIA-128-CCM" \
             "$P_SRV debug_level=3 tickets=1 ticket_aead=ARIA-128-CCM" \
             "$P_CLI debug_level=3 tickets=1 reconnect=1" \
@@ -2961,6 +3078,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets: ARIA-192-CCM" \
             "$P_SRV debug_level=3 tickets=1 ticket_aead=ARIA-192-CCM" \
             "$P_CLI debug_level=3 tickets=1 reconnect=1" \
@@ -2975,6 +3093,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets: ARIA-256-CCM" \
             "$P_SRV debug_level=3 tickets=1 ticket_aead=ARIA-256-CCM" \
             "$P_CLI debug_level=3 tickets=1 reconnect=1" \
@@ -2991,6 +3110,7 @@
 
 # Tests for Session Tickets with DTLS
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets, DTLS: basic" \
             "$P_SRV debug_level=3 dtls=1 tickets=1" \
             "$P_CLI debug_level=3 dtls=1 tickets=1 reconnect=1 skip_close_notify=1" \
@@ -3005,6 +3125,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets, DTLS: cache disabled" \
             "$P_SRV debug_level=3 dtls=1 tickets=1 cache_max=0" \
             "$P_CLI debug_level=3 dtls=1 tickets=1 reconnect=1 skip_close_notify=1" \
@@ -3019,6 +3140,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets, DTLS: timeout" \
             "$P_SRV debug_level=3 dtls=1 tickets=1 cache_max=0 ticket_timeout=1" \
             "$P_CLI debug_level=3 dtls=1 tickets=1 reconnect=1 skip_close_notify=1 reco_delay=2" \
@@ -3033,6 +3155,7 @@
             -S "a session has been resumed" \
             -C "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets, DTLS: session copy" \
             "$P_SRV debug_level=3 dtls=1 tickets=1 cache_max=0" \
             "$P_CLI debug_level=3 dtls=1 tickets=1 reconnect=1 skip_close_notify=1 reco_mode=0" \
@@ -3047,6 +3170,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets, DTLS: openssl server" \
             "$O_SRV -dtls" \
             "$P_CLI dtls=1 debug_level=3 tickets=1 reconnect=1" \
@@ -3059,6 +3183,7 @@
 # For reasons that aren't fully understood, this test randomly fails with high
 # probability with OpenSSL 1.0.2g on the CI, see #5012.
 requires_openssl_next
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using tickets, DTLS: openssl client" \
             "$P_SRV dtls=1 debug_level=3 tickets=1" \
             "( $O_NEXT_CLI -dtls -sess_out $SESSION; \
@@ -3073,6 +3198,7 @@
 
 # Tests for Session Resume based on session-ID and cache
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using cache: tickets enabled on client" \
             "$P_SRV debug_level=3 tickets=0" \
             "$P_CLI debug_level=3 tickets=1 reconnect=1" \
@@ -3087,6 +3213,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using cache: tickets enabled on server" \
             "$P_SRV debug_level=3 tickets=1" \
             "$P_CLI debug_level=3 tickets=0 reconnect=1" \
@@ -3101,6 +3228,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using cache: cache_max=0" \
             "$P_SRV debug_level=3 tickets=0 cache_max=0" \
             "$P_CLI debug_level=3 tickets=0 reconnect=1" \
@@ -3110,6 +3238,7 @@
             -S "a session has been resumed" \
             -C "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using cache: cache_max=1" \
             "$P_SRV debug_level=3 tickets=0 cache_max=1" \
             "$P_CLI debug_level=3 tickets=0 reconnect=1" \
@@ -3119,6 +3248,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using cache: timeout > delay" \
             "$P_SRV debug_level=3 tickets=0" \
             "$P_CLI debug_level=3 tickets=0 reconnect=1 reco_delay=0" \
@@ -3128,6 +3258,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using cache: timeout < delay" \
             "$P_SRV debug_level=3 tickets=0 cache_timeout=1" \
             "$P_CLI debug_level=3 tickets=0 reconnect=1 reco_delay=2" \
@@ -3137,6 +3268,7 @@
             -S "a session has been resumed" \
             -C "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using cache: no timeout" \
             "$P_SRV debug_level=3 tickets=0 cache_timeout=0" \
             "$P_CLI debug_level=3 tickets=0 reconnect=1 reco_delay=2" \
@@ -3146,6 +3278,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using cache: session copy" \
             "$P_SRV debug_level=3 tickets=0" \
             "$P_CLI debug_level=3 tickets=0 reconnect=1 reco_mode=0" \
@@ -3155,6 +3288,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using cache: openssl client" \
             "$P_SRV debug_level=3 tickets=0" \
             "( $O_CLI -sess_out $SESSION; \
@@ -3167,6 +3301,7 @@
             -S "session successfully restored from ticket" \
             -s "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using cache: openssl server" \
             "$O_SRV" \
             "$P_CLI debug_level=3 tickets=0 reconnect=1" \
@@ -3177,6 +3312,7 @@
 
 # Tests for Session Resume based on session-ID and cache, DTLS
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using cache, DTLS: tickets enabled on client" \
             "$P_SRV dtls=1 debug_level=3 tickets=0" \
             "$P_CLI dtls=1 debug_level=3 tickets=1 reconnect=1 skip_close_notify=1" \
@@ -3191,6 +3327,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using cache, DTLS: tickets enabled on server" \
             "$P_SRV dtls=1 debug_level=3 tickets=1" \
             "$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1 skip_close_notify=1" \
@@ -3205,6 +3342,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using cache, DTLS: cache_max=0" \
             "$P_SRV dtls=1 debug_level=3 tickets=0 cache_max=0" \
             "$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1 skip_close_notify=1" \
@@ -3214,6 +3352,7 @@
             -S "a session has been resumed" \
             -C "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using cache, DTLS: cache_max=1" \
             "$P_SRV dtls=1 debug_level=3 tickets=0 cache_max=1" \
             "$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1 skip_close_notify=1" \
@@ -3223,6 +3362,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using cache, DTLS: timeout > delay" \
             "$P_SRV dtls=1 debug_level=3 tickets=0" \
             "$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1 skip_close_notify=1 reco_delay=0" \
@@ -3232,6 +3372,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using cache, DTLS: timeout < delay" \
             "$P_SRV dtls=1 debug_level=3 tickets=0 cache_timeout=1" \
             "$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1 skip_close_notify=1 reco_delay=2" \
@@ -3241,6 +3382,7 @@
             -S "a session has been resumed" \
             -C "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using cache, DTLS: no timeout" \
             "$P_SRV dtls=1 debug_level=3 tickets=0 cache_timeout=0" \
             "$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1 skip_close_notify=1 reco_delay=2" \
@@ -3250,6 +3392,7 @@
             -s "a session has been resumed" \
             -c "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using cache, DTLS: session copy" \
             "$P_SRV dtls=1 debug_level=3 tickets=0" \
             "$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1 skip_close_notify=1 reco_mode=0" \
@@ -3262,6 +3405,7 @@
 # For reasons that aren't fully understood, this test randomly fails with high
 # probability with OpenSSL 1.0.2g on the CI, see #5012.
 requires_openssl_next
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using cache, DTLS: openssl client" \
             "$P_SRV dtls=1 debug_level=3 tickets=0" \
             "( $O_NEXT_CLI -dtls -sess_out $SESSION; \
@@ -3274,6 +3418,7 @@
             -S "session successfully restored from ticket" \
             -s "a session has been resumed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Session resume using cache, DTLS: openssl server" \
             "$O_SRV -dtls" \
             "$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1" \
@@ -3285,6 +3430,7 @@
 # Tests for Max Fragment Length extension
 
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Max fragment length: enabled, default" \
             "$P_SRV debug_level=3" \
             "$P_CLI debug_level=3" \
@@ -3299,6 +3445,7 @@
             -C "found max_fragment_length extension"
 
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Max fragment length: enabled, default, larger message" \
             "$P_SRV debug_level=3" \
             "$P_CLI debug_level=3 request_size=$(( $MAX_CONTENT_LEN + 1))" \
@@ -3316,6 +3463,7 @@
             -s "1 bytes read"
 
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Max fragment length, DTLS: enabled, default, larger message" \
             "$P_SRV debug_level=3 dtls=1" \
             "$P_CLI debug_level=3 dtls=1 request_size=$(( $MAX_CONTENT_LEN + 1))" \
@@ -3335,6 +3483,7 @@
 # content length configuration.)
 
 requires_config_disabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Max fragment length: disabled, larger message" \
             "$P_SRV debug_level=3" \
             "$P_CLI debug_level=3 request_size=$(( $MAX_CONTENT_LEN + 1))" \
@@ -3348,6 +3497,7 @@
             -s "1 bytes read"
 
 requires_config_disabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Max fragment length, DTLS: disabled, larger message" \
             "$P_SRV debug_level=3 dtls=1" \
             "$P_CLI debug_level=3 dtls=1 request_size=$(( $MAX_CONTENT_LEN + 1))" \
@@ -3360,6 +3510,7 @@
 
 requires_max_content_len 4096
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Max fragment length: used by client" \
             "$P_SRV debug_level=3" \
             "$P_CLI debug_level=3 max_frag_len=4096" \
@@ -3375,6 +3526,7 @@
 
 requires_max_content_len 1024
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Max fragment length: client 512, server 1024" \
             "$P_SRV debug_level=3 max_frag_len=1024" \
             "$P_CLI debug_level=3 max_frag_len=512" \
@@ -3390,6 +3542,7 @@
 
 requires_max_content_len 2048
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Max fragment length: client 512, server 2048" \
             "$P_SRV debug_level=3 max_frag_len=2048" \
             "$P_CLI debug_level=3 max_frag_len=512" \
@@ -3405,6 +3558,7 @@
 
 requires_max_content_len 4096
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Max fragment length: client 512, server 4096" \
             "$P_SRV debug_level=3 max_frag_len=4096" \
             "$P_CLI debug_level=3 max_frag_len=512" \
@@ -3420,6 +3574,7 @@
 
 requires_max_content_len 1024
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Max fragment length: client 1024, server 512" \
             "$P_SRV debug_level=3 max_frag_len=512" \
             "$P_CLI debug_level=3 max_frag_len=1024" \
@@ -3435,6 +3590,7 @@
 
 requires_max_content_len 2048
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Max fragment length: client 1024, server 2048" \
             "$P_SRV debug_level=3 max_frag_len=2048" \
             "$P_CLI debug_level=3 max_frag_len=1024" \
@@ -3450,6 +3606,7 @@
 
 requires_max_content_len 4096
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Max fragment length: client 1024, server 4096" \
             "$P_SRV debug_level=3 max_frag_len=4096" \
             "$P_CLI debug_level=3 max_frag_len=1024" \
@@ -3465,6 +3622,7 @@
 
 requires_max_content_len 2048
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Max fragment length: client 2048, server 512" \
             "$P_SRV debug_level=3 max_frag_len=512" \
             "$P_CLI debug_level=3 max_frag_len=2048" \
@@ -3480,6 +3638,7 @@
 
 requires_max_content_len 2048
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Max fragment length: client 2048, server 1024" \
             "$P_SRV debug_level=3 max_frag_len=1024" \
             "$P_CLI debug_level=3 max_frag_len=2048" \
@@ -3495,6 +3654,7 @@
 
 requires_max_content_len 4096
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Max fragment length: client 2048, server 4096" \
             "$P_SRV debug_level=3 max_frag_len=4096" \
             "$P_CLI debug_level=3 max_frag_len=2048" \
@@ -3510,6 +3670,7 @@
 
 requires_max_content_len 4096
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Max fragment length: client 4096, server 512" \
             "$P_SRV debug_level=3 max_frag_len=512" \
             "$P_CLI debug_level=3 max_frag_len=4096" \
@@ -3525,6 +3686,7 @@
 
 requires_max_content_len 4096
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Max fragment length: client 4096, server 1024" \
             "$P_SRV debug_level=3 max_frag_len=1024" \
             "$P_CLI debug_level=3 max_frag_len=4096" \
@@ -3540,6 +3702,7 @@
 
 requires_max_content_len 4096
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Max fragment length: client 4096, server 2048" \
             "$P_SRV debug_level=3 max_frag_len=2048" \
             "$P_CLI debug_level=3 max_frag_len=4096" \
@@ -3555,6 +3718,7 @@
 
 requires_max_content_len 4096
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Max fragment length: used by server" \
             "$P_SRV debug_level=3 max_frag_len=4096" \
             "$P_CLI debug_level=3" \
@@ -3571,6 +3735,7 @@
 requires_max_content_len 4096
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Max fragment length: gnutls server" \
             "$G_SRV" \
             "$P_CLI debug_level=3 max_frag_len=4096" \
@@ -3582,6 +3747,7 @@
 
 requires_max_content_len 2048
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Max fragment length: client, message just fits" \
             "$P_SRV debug_level=3" \
             "$P_CLI debug_level=3 max_frag_len=2048 request_size=2048" \
@@ -3599,6 +3765,7 @@
 
 requires_max_content_len 2048
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Max fragment length: client, larger message" \
             "$P_SRV debug_level=3" \
             "$P_CLI debug_level=3 max_frag_len=2048 request_size=2345" \
@@ -3617,6 +3784,7 @@
 
 requires_max_content_len 2048
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Max fragment length: DTLS client, larger message" \
             "$P_SRV debug_level=3 dtls=1" \
             "$P_CLI debug_level=3 dtls=1 max_frag_len=2048 request_size=2345" \
@@ -3634,6 +3802,7 @@
 # Tests for renegotiation
 
 # Renegotiation SCSV always added, regardless of SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: none, for reference" \
             "$P_SRV debug_level=3 exchanges=2 auth_mode=optional" \
             "$P_CLI debug_level=3 exchanges=2" \
@@ -3648,6 +3817,7 @@
             -S "write hello request"
 
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: client-initiated" \
             "$P_SRV debug_level=3 exchanges=2 renegotiation=1 auth_mode=optional" \
             "$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \
@@ -3662,6 +3832,7 @@
             -S "write hello request"
 
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: server-initiated" \
             "$P_SRV debug_level=3 exchanges=2 renegotiation=1 auth_mode=optional renegotiate=1" \
             "$P_CLI debug_level=3 exchanges=2 renegotiation=1" \
@@ -3679,6 +3850,7 @@
 # the server did not parse the Signature Algorithm extension. This test is valid only if an MD
 # algorithm stronger than SHA-1 is enabled in mbedtls_config.h
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: Signature Algorithms parsing, client-initiated" \
             "$P_SRV debug_level=3 exchanges=2 renegotiation=1 auth_mode=optional" \
             "$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \
@@ -3697,6 +3869,7 @@
 # the server did not parse the Signature Algorithm extension. This test is valid only if an MD
 # algorithm stronger than SHA-1 is enabled in mbedtls_config.h
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: Signature Algorithms parsing, server-initiated" \
             "$P_SRV debug_level=3 exchanges=2 renegotiation=1 auth_mode=optional renegotiate=1" \
             "$P_CLI debug_level=3 exchanges=2 renegotiation=1" \
@@ -3712,6 +3885,7 @@
             -S "client hello v3, signature_algorithm ext: 2" # Is SHA-1 negotiated?
 
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: double" \
             "$P_SRV debug_level=3 exchanges=2 renegotiation=1 auth_mode=optional renegotiate=1" \
             "$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \
@@ -3728,6 +3902,7 @@
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation with max fragment length: client 2048, server 512" \
             "$P_SRV debug_level=3 exchanges=2 renegotiation=1 auth_mode=optional renegotiate=1 max_frag_len=512" \
             "$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 max_frag_len=2048 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8" \
@@ -3750,6 +3925,7 @@
             -s "write hello request"
 
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: client-initiated, server-rejected" \
             "$P_SRV debug_level=3 exchanges=2 renegotiation=0 auth_mode=optional" \
             "$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \
@@ -3766,6 +3942,7 @@
             -c "failed"
 
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: server-initiated, client-rejected, default" \
             "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 auth_mode=optional" \
             "$P_CLI debug_level=3 exchanges=2 renegotiation=0" \
@@ -3782,6 +3959,7 @@
             -S "failed"
 
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: server-initiated, client-rejected, not enforced" \
             "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \
              renego_delay=-1 auth_mode=optional" \
@@ -3800,6 +3978,7 @@
 
 # delay 2 for 1 alert record + 1 application data record
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: server-initiated, client-rejected, delay 2" \
             "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \
              renego_delay=2 auth_mode=optional" \
@@ -3817,6 +3996,7 @@
             -S "failed"
 
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: server-initiated, client-rejected, delay 0" \
             "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \
              renego_delay=0 auth_mode=optional" \
@@ -3833,6 +4013,7 @@
             -s "SSL - An unexpected message was received from our peer"
 
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: server-initiated, client-accepted, delay 0" \
             "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \
              renego_delay=0 auth_mode=optional" \
@@ -3850,6 +4031,7 @@
             -S "failed"
 
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: periodic, just below period" \
             "$P_SRV debug_level=3 exchanges=9 renegotiation=1 renego_period=3 auth_mode=optional" \
             "$P_CLI debug_level=3 exchanges=2 renegotiation=1" \
@@ -3868,6 +4050,7 @@
 
 # one extra exchange to be able to complete renego
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: periodic, just above period" \
             "$P_SRV debug_level=3 exchanges=9 renegotiation=1 renego_period=3 auth_mode=optional" \
             "$P_CLI debug_level=3 exchanges=4 renegotiation=1" \
@@ -3885,6 +4068,7 @@
             -S "failed"
 
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: periodic, two times period" \
             "$P_SRV debug_level=3 exchanges=9 renegotiation=1 renego_period=3 auth_mode=optional" \
             "$P_CLI debug_level=3 exchanges=7 renegotiation=1" \
@@ -3902,6 +4086,7 @@
             -S "failed"
 
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: periodic, above period, disabled" \
             "$P_SRV debug_level=3 exchanges=9 renegotiation=0 renego_period=3 auth_mode=optional" \
             "$P_CLI debug_level=3 exchanges=4 renegotiation=1" \
@@ -3919,6 +4104,7 @@
             -S "failed"
 
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: nbio, client-initiated" \
             "$P_SRV debug_level=3 nbio=2 exchanges=2 renegotiation=1 auth_mode=optional" \
             "$P_CLI debug_level=3 nbio=2 exchanges=2 renegotiation=1 renegotiate=1" \
@@ -3933,6 +4119,7 @@
             -S "write hello request"
 
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: nbio, server-initiated" \
             "$P_SRV debug_level=3 nbio=2 exchanges=2 renegotiation=1 renegotiate=1 auth_mode=optional" \
             "$P_CLI debug_level=3 nbio=2 exchanges=2 renegotiation=1" \
@@ -3947,6 +4134,7 @@
             -s "write hello request"
 
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: openssl server, client-initiated" \
             "$O_SRV -www" \
             "$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1" \
@@ -3960,6 +4148,7 @@
 
 requires_gnutls
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: gnutls server strict, client-initiated" \
             "$G_SRV --priority=NORMAL:%SAFE_RENEGOTIATION" \
             "$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1" \
@@ -3973,6 +4162,7 @@
 
 requires_gnutls
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: gnutls server unsafe, client-initiated default" \
             "$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
             "$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1" \
@@ -3986,6 +4176,7 @@
 
 requires_gnutls
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: gnutls server unsafe, client-inititated no legacy" \
             "$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
             "$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1 \
@@ -4000,6 +4191,7 @@
 
 requires_gnutls
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: gnutls server unsafe, client-inititated legacy" \
             "$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
             "$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1 \
@@ -4013,6 +4205,7 @@
             -c "HTTP/1.0 200 [Oo][Kk]"
 
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: DTLS, client-initiated" \
             "$P_SRV debug_level=3 dtls=1 exchanges=2 renegotiation=1" \
             "$P_CLI debug_level=3 dtls=1 exchanges=2 renegotiation=1 renegotiate=1" \
@@ -4027,6 +4220,7 @@
             -S "write hello request"
 
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: DTLS, server-initiated" \
             "$P_SRV debug_level=3 dtls=1 exchanges=2 renegotiation=1 renegotiate=1" \
             "$P_CLI debug_level=3 dtls=1 exchanges=2 renegotiation=1 \
@@ -4042,6 +4236,7 @@
             -s "write hello request"
 
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: DTLS, renego_period overflow" \
             "$P_SRV debug_level=3 dtls=1 exchanges=4 renegotiation=1 renego_period=18446462598732840962 auth_mode=optional" \
             "$P_CLI debug_level=3 dtls=1 exchanges=4 renegotiation=1" \
@@ -4057,6 +4252,7 @@
 
 requires_gnutls
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renegotiation: DTLS, gnutls server, client-initiated" \
             "$G_SRV -u --mtu 4096" \
             "$P_CLI debug_level=3 dtls=1 exchanges=1 renegotiation=1 renegotiate=1" \
@@ -4071,6 +4267,7 @@
 # Test for the "secure renegotation" extension only (no actual renegotiation)
 
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renego ext: gnutls server strict, client default" \
             "$G_SRV --priority=NORMAL:%SAFE_RENEGOTIATION" \
             "$P_CLI debug_level=3" \
@@ -4080,6 +4277,7 @@
             -c "HTTP/1.0 200 [Oo][Kk]"
 
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renego ext: gnutls server unsafe, client default" \
             "$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
             "$P_CLI debug_level=3" \
@@ -4089,6 +4287,7 @@
             -c "HTTP/1.0 200 [Oo][Kk]"
 
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renego ext: gnutls server unsafe, client break legacy" \
             "$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
             "$P_CLI debug_level=3 allow_legacy=-1" \
@@ -4098,6 +4297,7 @@
             -C "HTTP/1.0 200 [Oo][Kk]"
 
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renego ext: gnutls client strict, server default" \
             "$P_SRV debug_level=3" \
             "$G_CLI --priority=NORMAL:%SAFE_RENEGOTIATION localhost" \
@@ -4106,6 +4306,7 @@
             -s "server hello, secure renegotiation extension"
 
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renego ext: gnutls client unsafe, server default" \
             "$P_SRV debug_level=3" \
             "$G_CLI --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION localhost" \
@@ -4114,6 +4315,7 @@
             -S "server hello, secure renegotiation extension"
 
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Renego ext: gnutls client unsafe, server break legacy" \
             "$P_SRV debug_level=3 allow_legacy=-1" \
             "$G_CLI --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION localhost" \
@@ -4124,6 +4326,7 @@
 # Tests for silently dropping trailing extra bytes in .der certificates
 
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DER format: no trailing bytes" \
             "$P_SRV crt_file=data_files/server5-der0.crt \
              key_file=data_files/server5.key" \
@@ -4132,6 +4335,7 @@
             -c "Handshake was completed" \
 
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DER format: with a trailing zero byte" \
             "$P_SRV crt_file=data_files/server5-der1a.crt \
              key_file=data_files/server5.key" \
@@ -4140,6 +4344,7 @@
             -c "Handshake was completed" \
 
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DER format: with a trailing random byte" \
             "$P_SRV crt_file=data_files/server5-der1b.crt \
              key_file=data_files/server5.key" \
@@ -4148,6 +4353,7 @@
             -c "Handshake was completed" \
 
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DER format: with 2 trailing random bytes" \
             "$P_SRV crt_file=data_files/server5-der2.crt \
              key_file=data_files/server5.key" \
@@ -4156,6 +4362,7 @@
             -c "Handshake was completed" \
 
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DER format: with 4 trailing random bytes" \
             "$P_SRV crt_file=data_files/server5-der4.crt \
              key_file=data_files/server5.key" \
@@ -4164,6 +4371,7 @@
             -c "Handshake was completed" \
 
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DER format: with 8 trailing random bytes" \
             "$P_SRV crt_file=data_files/server5-der8.crt \
              key_file=data_files/server5.key" \
@@ -4172,6 +4380,7 @@
             -c "Handshake was completed" \
 
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DER format: with 9 trailing random bytes" \
             "$P_SRV crt_file=data_files/server5-der9.crt \
              key_file=data_files/server5.key" \
@@ -4182,6 +4391,7 @@
 # Tests for auth_mode, there are duplicated tests using ca callback for authentication
 # When updating these tests, modify the matching authentication tests accordingly
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: server badcert, client required" \
             "$P_SRV crt_file=data_files/server5-badsign.crt \
              key_file=data_files/server5.key" \
@@ -4192,6 +4402,7 @@
             -c "! mbedtls_ssl_handshake returned" \
             -c "X509 - Certificate verification failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: server badcert, client optional" \
             "$P_SRV crt_file=data_files/server5-badsign.crt \
              key_file=data_files/server5.key" \
@@ -4202,6 +4413,7 @@
             -C "! mbedtls_ssl_handshake returned" \
             -C "X509 - Certificate verification failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: server goodcert, client optional, no trusted CA" \
             "$P_SRV" \
             "$P_CLI debug_level=3 auth_mode=optional ca_file=none ca_path=none" \
@@ -4213,6 +4425,7 @@
             -C "X509 - Certificate verification failed" \
             -C "SSL - No CA Chain is set, but required to operate"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: server goodcert, client required, no trusted CA" \
             "$P_SRV" \
             "$P_CLI debug_level=3 auth_mode=required ca_file=none ca_path=none" \
@@ -4231,6 +4444,7 @@
 # different means to have the server ignoring the client's supported curve list.
 
 requires_config_enabled MBEDTLS_ECP_C
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: server ECDH p256v1, client required, p256v1 unsupported" \
             "$P_SRV debug_level=1 key_file=data_files/server5.key \
              crt_file=data_files/server5.ku-ka.crt" \
@@ -4241,6 +4455,7 @@
             -C "bad server certificate (ECDH curve)" # Expect failure at earlier verification stage
 
 requires_config_enabled MBEDTLS_ECP_C
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: server ECDH p256v1, client optional, p256v1 unsupported" \
             "$P_SRV debug_level=1 key_file=data_files/server5.key \
              crt_file=data_files/server5.ku-ka.crt" \
@@ -4250,6 +4465,7 @@
             -c "! Certificate verification flags"\
             -c "bad server certificate (ECDH curve)" # Expect failure only at ECDH params check
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: server badcert, client none" \
             "$P_SRV crt_file=data_files/server5-badsign.crt \
              key_file=data_files/server5.key" \
@@ -4260,6 +4476,7 @@
             -C "! mbedtls_ssl_handshake returned" \
             -C "X509 - Certificate verification failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client SHA256, server required" \
             "$P_SRV auth_mode=required" \
             "$P_CLI debug_level=3 crt_file=data_files/server6.crt \
@@ -4269,6 +4486,7 @@
             -c "Supported Signature Algorithm found: 4," \
             -c "Supported Signature Algorithm found: 5,"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client SHA384, server required" \
             "$P_SRV auth_mode=required" \
             "$P_CLI debug_level=3 crt_file=data_files/server6.crt \
@@ -4278,6 +4496,7 @@
             -c "Supported Signature Algorithm found: 4," \
             -c "Supported Signature Algorithm found: 5,"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client has no cert, server required (TLS)" \
             "$P_SRV debug_level=3 auth_mode=required" \
             "$P_CLI debug_level=3 crt_file=none \
@@ -4294,6 +4513,7 @@
             -c "! mbedtls_ssl_handshake returned" \
             -s "No client certification received from the client, but required by the authentication mode"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client badcert, server required" \
             "$P_SRV debug_level=3 auth_mode=required" \
             "$P_CLI debug_level=3 crt_file=data_files/server5-badsign.crt \
@@ -4315,6 +4535,7 @@
 # detect that its write end of the connection is closed and abort
 # before reading the alert message.
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client cert self-signed and trusted, server required" \
             "$P_SRV debug_level=3 auth_mode=required ca_file=data_files/server5-selfsigned.crt" \
             "$P_CLI debug_level=3 crt_file=data_files/server5-selfsigned.crt \
@@ -4330,6 +4551,7 @@
             -S "! The certificate is not correctly signed" \
             -S "X509 - Certificate verification failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client cert not trusted, server required" \
             "$P_SRV debug_level=3 auth_mode=required" \
             "$P_CLI debug_level=3 crt_file=data_files/server5-selfsigned.crt \
@@ -4347,6 +4569,7 @@
             -c "! mbedtls_ssl_handshake returned" \
             -s "X509 - Certificate verification failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client badcert, server optional" \
             "$P_SRV debug_level=3 auth_mode=optional" \
             "$P_CLI debug_level=3 crt_file=data_files/server5-badsign.crt \
@@ -4364,6 +4587,7 @@
             -C "! mbedtls_ssl_handshake returned" \
             -S "X509 - Certificate verification failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client badcert, server none" \
             "$P_SRV debug_level=3 auth_mode=none" \
             "$P_CLI debug_level=3 crt_file=data_files/server5-badsign.crt \
@@ -4381,6 +4605,7 @@
             -C "! mbedtls_ssl_handshake returned" \
             -S "X509 - Certificate verification failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client no cert, server optional" \
             "$P_SRV debug_level=3 auth_mode=optional" \
             "$P_CLI debug_level=3 crt_file=none key_file=none" \
@@ -4397,6 +4622,7 @@
             -C "! mbedtls_ssl_handshake returned" \
             -S "X509 - Certificate verification failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: openssl client no cert, server optional" \
             "$P_SRV debug_level=3 auth_mode=optional" \
             "$O_CLI" \
@@ -4407,6 +4633,7 @@
             -S "! mbedtls_ssl_handshake returned" \
             -S "X509 - Certificate verification failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client no cert, openssl server optional" \
             "$O_SRV -verify 10" \
             "$P_CLI debug_level=3 crt_file=none key_file=none" \
@@ -4417,6 +4644,7 @@
             -c "skip write certificate verify" \
             -C "! mbedtls_ssl_handshake returned"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client no cert, openssl server required" \
             "$O_SRV -Verify 10" \
             "$P_CLI debug_level=3 crt_file=none key_file=none" \
@@ -4439,6 +4667,7 @@
 # are in place so that the semantics are consistent with the test description.
 requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
 requires_full_size_output_buffer
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: server max_int chain, client default" \
             "$P_SRV crt_file=data_files/dir-maxpath/c09.pem \
                     key_file=data_files/dir-maxpath/09.key" \
@@ -4448,6 +4677,7 @@
 
 requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
 requires_full_size_output_buffer
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: server max_int+1 chain, client default" \
             "$P_SRV crt_file=data_files/dir-maxpath/c10.pem \
                     key_file=data_files/dir-maxpath/10.key" \
@@ -4457,6 +4687,7 @@
 
 requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
 requires_full_size_output_buffer
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: server max_int+1 chain, client optional" \
             "$P_SRV crt_file=data_files/dir-maxpath/c10.pem \
                     key_file=data_files/dir-maxpath/10.key" \
@@ -4467,6 +4698,7 @@
 
 requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
 requires_full_size_output_buffer
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: server max_int+1 chain, client none" \
             "$P_SRV crt_file=data_files/dir-maxpath/c10.pem \
                     key_file=data_files/dir-maxpath/10.key" \
@@ -4477,6 +4709,7 @@
 
 requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
 requires_full_size_output_buffer
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client max_int+1 chain, server default" \
             "$P_SRV ca_file=data_files/dir-maxpath/00.crt" \
             "$P_CLI crt_file=data_files/dir-maxpath/c10.pem \
@@ -4486,6 +4719,7 @@
 
 requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
 requires_full_size_output_buffer
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client max_int+1 chain, server optional" \
             "$P_SRV ca_file=data_files/dir-maxpath/00.crt auth_mode=optional" \
             "$P_CLI crt_file=data_files/dir-maxpath/c10.pem \
@@ -4495,6 +4729,7 @@
 
 requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
 requires_full_size_output_buffer
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client max_int+1 chain, server required" \
             "$P_SRV ca_file=data_files/dir-maxpath/00.crt auth_mode=required" \
             "$P_CLI crt_file=data_files/dir-maxpath/c10.pem \
@@ -4504,6 +4739,7 @@
 
 requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
 requires_full_size_output_buffer
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: client max_int chain, server required" \
             "$P_SRV ca_file=data_files/dir-maxpath/00.crt auth_mode=required" \
             "$P_CLI crt_file=data_files/dir-maxpath/c09.pem \
@@ -4513,6 +4749,7 @@
 
 # Tests for CA list in CertificateRequest messages
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: send CA list in CertificateRequest  (default)" \
             "$P_SRV debug_level=3 auth_mode=required" \
             "$P_CLI crt_file=data_files/server6.crt \
@@ -4520,6 +4757,7 @@
             0 \
             -s "requested DN"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: do not send CA list in CertificateRequest" \
             "$P_SRV debug_level=3 auth_mode=required cert_req_ca_list=0" \
             "$P_CLI crt_file=data_files/server6.crt \
@@ -4527,6 +4765,7 @@
             0 \
             -S "requested DN"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication: send CA list in CertificateRequest, client self signed" \
             "$P_SRV debug_level=3 auth_mode=required cert_req_ca_list=0" \
             "$P_CLI debug_level=3 crt_file=data_files/server5-selfsigned.crt \
@@ -4543,6 +4782,7 @@
 # When updating these tests, modify the matching authentication tests accordingly
 
 requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication, CA callback: server badcert, client required" \
             "$P_SRV crt_file=data_files/server5-badsign.crt \
              key_file=data_files/server5.key" \
@@ -4555,6 +4795,7 @@
             -c "X509 - Certificate verification failed"
 
 requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication, CA callback: server badcert, client optional" \
             "$P_SRV crt_file=data_files/server5-badsign.crt \
              key_file=data_files/server5.key" \
@@ -4575,6 +4816,7 @@
 
 requires_config_enabled MBEDTLS_ECP_C
 requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication, CA callback: server ECDH p256v1, client required, p256v1 unsupported" \
             "$P_SRV debug_level=1 key_file=data_files/server5.key \
              crt_file=data_files/server5.ku-ka.crt" \
@@ -4587,6 +4829,7 @@
 
 requires_config_enabled MBEDTLS_ECP_C
 requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication, CA callback: server ECDH p256v1, client optional, p256v1 unsupported" \
             "$P_SRV debug_level=1 key_file=data_files/server5.key \
              crt_file=data_files/server5.ku-ka.crt" \
@@ -4598,6 +4841,7 @@
             -c "bad server certificate (ECDH curve)" # Expect failure only at ECDH params check
 
 requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication, CA callback: client SHA256, server required" \
             "$P_SRV ca_callback=1 debug_level=3 auth_mode=required" \
             "$P_CLI debug_level=3 crt_file=data_files/server6.crt \
@@ -4609,6 +4853,7 @@
             -c "Supported Signature Algorithm found: 5,"
 
 requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication, CA callback: client SHA384, server required" \
             "$P_SRV ca_callback=1 debug_level=3 auth_mode=required" \
             "$P_CLI debug_level=3 crt_file=data_files/server6.crt \
@@ -4620,6 +4865,7 @@
             -c "Supported Signature Algorithm found: 5,"
 
 requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication, CA callback: client badcert, server required" \
             "$P_SRV ca_callback=1 debug_level=3 auth_mode=required" \
             "$P_CLI debug_level=3 crt_file=data_files/server5-badsign.crt \
@@ -4643,6 +4889,7 @@
 # before reading the alert message.
 
 requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication, CA callback: client cert not trusted, server required" \
             "$P_SRV ca_callback=1 debug_level=3 auth_mode=required" \
             "$P_CLI debug_level=3 crt_file=data_files/server5-selfsigned.crt \
@@ -4662,6 +4909,7 @@
             -s "X509 - Certificate verification failed"
 
 requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication, CA callback: client badcert, server optional" \
             "$P_SRV ca_callback=1 debug_level=3 auth_mode=optional" \
             "$P_CLI debug_level=3 crt_file=data_files/server5-badsign.crt \
@@ -4683,6 +4931,7 @@
 requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
 requires_full_size_output_buffer
 requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication, CA callback: server max_int chain, client default" \
             "$P_SRV crt_file=data_files/dir-maxpath/c09.pem \
                     key_file=data_files/dir-maxpath/09.key" \
@@ -4694,6 +4943,7 @@
 requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
 requires_full_size_output_buffer
 requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication, CA callback: server max_int+1 chain, client default" \
             "$P_SRV crt_file=data_files/dir-maxpath/c10.pem \
                     key_file=data_files/dir-maxpath/10.key" \
@@ -4705,6 +4955,7 @@
 requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
 requires_full_size_output_buffer
 requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication, CA callback: server max_int+1 chain, client optional" \
             "$P_SRV crt_file=data_files/dir-maxpath/c10.pem \
                     key_file=data_files/dir-maxpath/10.key" \
@@ -4717,6 +4968,7 @@
 requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
 requires_full_size_output_buffer
 requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication, CA callback: client max_int+1 chain, server optional" \
             "$P_SRV ca_callback=1 debug_level=3 ca_file=data_files/dir-maxpath/00.crt auth_mode=optional" \
             "$P_CLI crt_file=data_files/dir-maxpath/c10.pem \
@@ -4728,6 +4980,7 @@
 requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
 requires_full_size_output_buffer
 requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication, CA callback: client max_int+1 chain, server required" \
             "$P_SRV ca_callback=1 debug_level=3 ca_file=data_files/dir-maxpath/00.crt auth_mode=required" \
             "$P_CLI crt_file=data_files/dir-maxpath/c10.pem \
@@ -4739,6 +4992,7 @@
 requires_config_value_equals "MBEDTLS_X509_MAX_INTERMEDIATE_CA" $MAX_IM_CA
 requires_full_size_output_buffer
 requires_config_enabled MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Authentication, CA callback: client max_int chain, server required" \
             "$P_SRV ca_callback=1 debug_level=3 ca_file=data_files/dir-maxpath/00.crt auth_mode=required" \
             "$P_CLI crt_file=data_files/dir-maxpath/c09.pem \
@@ -4750,6 +5004,7 @@
 # Tests for certificate selection based on SHA verson
 
 requires_config_disabled MBEDTLS_X509_REMOVE_INFO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Certificate hash: client TLS 1.2 -> SHA-2" \
             "$P_SRV crt_file=data_files/server5.crt \
                     key_file=data_files/server5.key \
@@ -4763,6 +5018,7 @@
 # tests for SNI
 
 requires_config_disabled MBEDTLS_X509_REMOVE_INFO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SNI: no SNI callback" \
             "$P_SRV debug_level=3 \
              crt_file=data_files/server5.crt key_file=data_files/server5.key" \
@@ -4773,6 +5029,7 @@
             -c "subject name *: C=NL, O=PolarSSL, CN=localhost"
 
 requires_config_disabled MBEDTLS_X509_REMOVE_INFO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SNI: matching cert 1" \
             "$P_SRV debug_level=3 \
              crt_file=data_files/server5.crt key_file=data_files/server5.key \
@@ -4784,6 +5041,7 @@
             -c "subject name *: C=NL, O=PolarSSL, CN=localhost"
 
 requires_config_disabled MBEDTLS_X509_REMOVE_INFO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SNI: matching cert 2" \
             "$P_SRV debug_level=3 \
              crt_file=data_files/server5.crt key_file=data_files/server5.key \
@@ -4795,6 +5053,7 @@
             -c "subject name *: C=NL, O=PolarSSL, CN=polarssl.example"
 
 requires_config_disabled MBEDTLS_X509_REMOVE_INFO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SNI: no matching cert" \
             "$P_SRV debug_level=3 \
              crt_file=data_files/server5.crt key_file=data_files/server5.key \
@@ -4807,6 +5066,7 @@
             -c "mbedtls_ssl_handshake returned" \
             -c "SSL - A fatal alert message was received from our peer"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SNI: client auth no override: optional" \
             "$P_SRV debug_level=3 auth_mode=optional \
              crt_file=data_files/server5.crt key_file=data_files/server5.key \
@@ -4820,6 +5080,7 @@
             -C "skip write certificate verify" \
             -S "skip parse certificate verify"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SNI: client auth override: none -> optional" \
             "$P_SRV debug_level=3 auth_mode=none \
              crt_file=data_files/server5.crt key_file=data_files/server5.key \
@@ -4833,6 +5094,7 @@
             -C "skip write certificate verify" \
             -S "skip parse certificate verify"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SNI: client auth override: optional -> none" \
             "$P_SRV debug_level=3 auth_mode=optional \
              crt_file=data_files/server5.crt key_file=data_files/server5.key \
@@ -4846,6 +5108,7 @@
             -c "skip write certificate verify" \
             -s "skip parse certificate verify"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SNI: CA no override" \
             "$P_SRV debug_level=3 auth_mode=optional \
              crt_file=data_files/server5.crt key_file=data_files/server5.key \
@@ -4864,6 +5127,7 @@
             -s "! The certificate is not correctly signed by the trusted CA" \
             -S "The certificate has been revoked (is on a CRL)"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SNI: CA override" \
             "$P_SRV debug_level=3 auth_mode=optional \
              crt_file=data_files/server5.crt key_file=data_files/server5.key \
@@ -4882,6 +5146,7 @@
             -S "! The certificate is not correctly signed by the trusted CA" \
             -S "The certificate has been revoked (is on a CRL)"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SNI: CA override with CRL" \
             "$P_SRV debug_level=3 auth_mode=optional \
              crt_file=data_files/server5.crt key_file=data_files/server5.key \
@@ -4903,6 +5168,7 @@
 # Tests for SNI and DTLS
 
 requires_config_disabled MBEDTLS_X509_REMOVE_INFO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SNI: DTLS, no SNI callback" \
             "$P_SRV debug_level=3 dtls=1 \
              crt_file=data_files/server5.crt key_file=data_files/server5.key" \
@@ -4913,6 +5179,7 @@
             -c "subject name *: C=NL, O=PolarSSL, CN=localhost"
 
 requires_config_disabled MBEDTLS_X509_REMOVE_INFO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SNI: DTLS, matching cert 1" \
             "$P_SRV debug_level=3 dtls=1 \
              crt_file=data_files/server5.crt key_file=data_files/server5.key \
@@ -4924,6 +5191,7 @@
             -c "subject name *: C=NL, O=PolarSSL, CN=localhost"
 
 requires_config_disabled MBEDTLS_X509_REMOVE_INFO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SNI: DTLS, matching cert 2" \
             "$P_SRV debug_level=3 dtls=1 \
              crt_file=data_files/server5.crt key_file=data_files/server5.key \
@@ -4934,6 +5202,7 @@
             -c "issuer name *: C=NL, O=PolarSSL, CN=PolarSSL Test CA" \
             -c "subject name *: C=NL, O=PolarSSL, CN=polarssl.example"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SNI: DTLS, no matching cert" \
             "$P_SRV debug_level=3 dtls=1 \
              crt_file=data_files/server5.crt key_file=data_files/server5.key \
@@ -4946,6 +5215,7 @@
             -c "mbedtls_ssl_handshake returned" \
             -c "SSL - A fatal alert message was received from our peer"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SNI: DTLS, client auth no override: optional" \
             "$P_SRV debug_level=3 auth_mode=optional dtls=1 \
              crt_file=data_files/server5.crt key_file=data_files/server5.key \
@@ -4959,6 +5229,7 @@
             -C "skip write certificate verify" \
             -S "skip parse certificate verify"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SNI: DTLS, client auth override: none -> optional" \
             "$P_SRV debug_level=3 auth_mode=none dtls=1 \
              crt_file=data_files/server5.crt key_file=data_files/server5.key \
@@ -4972,6 +5243,7 @@
             -C "skip write certificate verify" \
             -S "skip parse certificate verify"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SNI: DTLS, client auth override: optional -> none" \
             "$P_SRV debug_level=3 auth_mode=optional dtls=1 \
              crt_file=data_files/server5.crt key_file=data_files/server5.key \
@@ -4985,6 +5257,7 @@
             -c "skip write certificate verify" \
             -s "skip parse certificate verify"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SNI: DTLS, CA no override" \
             "$P_SRV debug_level=3 auth_mode=optional dtls=1 \
              crt_file=data_files/server5.crt key_file=data_files/server5.key \
@@ -5003,6 +5276,7 @@
             -s "! The certificate is not correctly signed by the trusted CA" \
             -S "The certificate has been revoked (is on a CRL)"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SNI: DTLS, CA override" \
             "$P_SRV debug_level=3 auth_mode=optional dtls=1 \
              crt_file=data_files/server5.crt key_file=data_files/server5.key \
@@ -5021,6 +5295,7 @@
             -S "! The certificate is not correctly signed by the trusted CA" \
             -S "The certificate has been revoked (is on a CRL)"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SNI: DTLS, CA override with CRL" \
             "$P_SRV debug_level=3 auth_mode=optional \
              crt_file=data_files/server5.crt key_file=data_files/server5.key dtls=1 \
@@ -5041,6 +5316,7 @@
 
 # Tests for non-blocking I/O: exercise a variety of handshake flows
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Non-blocking I/O: basic handshake" \
             "$P_SRV nbio=2 tickets=0 auth_mode=none" \
             "$P_CLI nbio=2 tickets=0" \
@@ -5049,6 +5325,7 @@
             -C "mbedtls_ssl_handshake returned" \
             -c "Read from server: .* bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Non-blocking I/O: client auth" \
             "$P_SRV nbio=2 tickets=0 auth_mode=required" \
             "$P_CLI nbio=2 tickets=0" \
@@ -5057,6 +5334,7 @@
             -C "mbedtls_ssl_handshake returned" \
             -c "Read from server: .* bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Non-blocking I/O: ticket" \
             "$P_SRV nbio=2 tickets=1 auth_mode=none" \
             "$P_CLI nbio=2 tickets=1" \
@@ -5065,6 +5343,7 @@
             -C "mbedtls_ssl_handshake returned" \
             -c "Read from server: .* bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Non-blocking I/O: ticket + client auth" \
             "$P_SRV nbio=2 tickets=1 auth_mode=required" \
             "$P_CLI nbio=2 tickets=1" \
@@ -5073,6 +5352,7 @@
             -C "mbedtls_ssl_handshake returned" \
             -c "Read from server: .* bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Non-blocking I/O: ticket + client auth + resume" \
             "$P_SRV nbio=2 tickets=1 auth_mode=required" \
             "$P_CLI nbio=2 tickets=1 reconnect=1" \
@@ -5081,6 +5361,7 @@
             -C "mbedtls_ssl_handshake returned" \
             -c "Read from server: .* bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Non-blocking I/O: ticket + resume" \
             "$P_SRV nbio=2 tickets=1 auth_mode=none" \
             "$P_CLI nbio=2 tickets=1 reconnect=1" \
@@ -5089,6 +5370,7 @@
             -C "mbedtls_ssl_handshake returned" \
             -c "Read from server: .* bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Non-blocking I/O: session-id resume" \
             "$P_SRV nbio=2 tickets=0 auth_mode=none" \
             "$P_CLI nbio=2 tickets=0 reconnect=1" \
@@ -5099,6 +5381,7 @@
 
 # Tests for event-driven I/O: exercise a variety of handshake flows
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Event-driven I/O: basic handshake" \
             "$P_SRV event=1 tickets=0 auth_mode=none" \
             "$P_CLI event=1 tickets=0" \
@@ -5107,6 +5390,7 @@
             -C "mbedtls_ssl_handshake returned" \
             -c "Read from server: .* bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Event-driven I/O: client auth" \
             "$P_SRV event=1 tickets=0 auth_mode=required" \
             "$P_CLI event=1 tickets=0" \
@@ -5115,6 +5399,7 @@
             -C "mbedtls_ssl_handshake returned" \
             -c "Read from server: .* bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Event-driven I/O: ticket" \
             "$P_SRV event=1 tickets=1 auth_mode=none" \
             "$P_CLI event=1 tickets=1" \
@@ -5123,6 +5408,7 @@
             -C "mbedtls_ssl_handshake returned" \
             -c "Read from server: .* bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Event-driven I/O: ticket + client auth" \
             "$P_SRV event=1 tickets=1 auth_mode=required" \
             "$P_CLI event=1 tickets=1" \
@@ -5131,6 +5417,7 @@
             -C "mbedtls_ssl_handshake returned" \
             -c "Read from server: .* bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Event-driven I/O: ticket + client auth + resume" \
             "$P_SRV event=1 tickets=1 auth_mode=required" \
             "$P_CLI event=1 tickets=1 reconnect=1" \
@@ -5139,6 +5426,7 @@
             -C "mbedtls_ssl_handshake returned" \
             -c "Read from server: .* bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Event-driven I/O: ticket + resume" \
             "$P_SRV event=1 tickets=1 auth_mode=none" \
             "$P_CLI event=1 tickets=1 reconnect=1" \
@@ -5147,6 +5435,7 @@
             -C "mbedtls_ssl_handshake returned" \
             -c "Read from server: .* bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Event-driven I/O: session-id resume" \
             "$P_SRV event=1 tickets=0 auth_mode=none" \
             "$P_CLI event=1 tickets=0 reconnect=1" \
@@ -5155,42 +5444,49 @@
             -C "mbedtls_ssl_handshake returned" \
             -c "Read from server: .* bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Event-driven I/O, DTLS: basic handshake" \
             "$P_SRV dtls=1 event=1 tickets=0 auth_mode=none" \
             "$P_CLI dtls=1 event=1 tickets=0" \
             0 \
             -c "Read from server: .* bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Event-driven I/O, DTLS: client auth" \
             "$P_SRV dtls=1 event=1 tickets=0 auth_mode=required" \
             "$P_CLI dtls=1 event=1 tickets=0" \
             0 \
             -c "Read from server: .* bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Event-driven I/O, DTLS: ticket" \
             "$P_SRV dtls=1 event=1 tickets=1 auth_mode=none" \
             "$P_CLI dtls=1 event=1 tickets=1" \
             0 \
             -c "Read from server: .* bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Event-driven I/O, DTLS: ticket + client auth" \
             "$P_SRV dtls=1 event=1 tickets=1 auth_mode=required" \
             "$P_CLI dtls=1 event=1 tickets=1" \
             0 \
             -c "Read from server: .* bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Event-driven I/O, DTLS: ticket + client auth + resume" \
             "$P_SRV dtls=1 event=1 tickets=1 auth_mode=required" \
             "$P_CLI dtls=1 event=1 tickets=1 reconnect=1 skip_close_notify=1" \
             0 \
             -c "Read from server: .* bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Event-driven I/O, DTLS: ticket + resume" \
             "$P_SRV dtls=1 event=1 tickets=1 auth_mode=none" \
             "$P_CLI dtls=1 event=1 tickets=1 reconnect=1 skip_close_notify=1" \
             0 \
             -c "Read from server: .* bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Event-driven I/O, DTLS: session-id resume" \
             "$P_SRV dtls=1 event=1 tickets=0 auth_mode=none" \
             "$P_CLI dtls=1 event=1 tickets=0 reconnect=1 skip_close_notify=1" \
@@ -5202,6 +5498,7 @@
 # within the same datagram as the Finished messages. In this situation, the
 # server MUST NOT idle on the underlying transport after handshake completion,
 # because the ApplicationData request has already been queued internally.
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Event-driven I/O, DTLS: session-id resume, UDP packing" \
             -p "$P_PXY pack=50" \
             "$P_SRV dtls=1 event=1 tickets=0 auth_mode=required" \
@@ -5211,6 +5508,7 @@
 
 # Tests for version negotiation
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Version check: all -> 1.2" \
             "$P_SRV" \
             "$P_CLI" \
@@ -5220,6 +5518,7 @@
             -s "Protocol is TLSv1.2" \
             -c "Protocol is TLSv1.2"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Not supported version check: cli TLS 1.0" \
             "$P_SRV" \
             "$G_CLI localhost --priority=NORMAL:-VERS-ALL:+VERS-TLS1.0" \
@@ -5229,6 +5528,7 @@
             -S "Protocol is TLSv1.0" \
             -C "Handshake was completed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Not supported version check: cli TLS 1.1" \
             "$P_SRV" \
             "$G_CLI localhost --priority=NORMAL:-VERS-ALL:+VERS-TLS1.1" \
@@ -5238,6 +5538,7 @@
             -S "Protocol is TLSv1.1" \
             -C "Handshake was completed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Not supported version check: srv max TLS 1.0" \
             "$G_SRV --priority=NORMAL:-VERS-TLS-ALL:+VERS-TLS1.0" \
             "$P_CLI" \
@@ -5247,6 +5548,7 @@
             -S "Version: TLS1.0" \
             -C "Protocol is TLSv1.0"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Not supported version check: srv max TLS 1.1" \
             "$G_SRV --priority=NORMAL:-VERS-TLS-ALL:+VERS-TLS1.1" \
             "$P_CLI" \
@@ -5258,6 +5560,7 @@
 
 # Tests for ALPN extension
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "ALPN: none" \
             "$P_SRV debug_level=3" \
             "$P_CLI debug_level=3" \
@@ -5270,6 +5573,7 @@
             -C "Application Layer Protocol is" \
             -S "Application Layer Protocol is"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "ALPN: client only" \
             "$P_SRV debug_level=3" \
             "$P_CLI debug_level=3 alpn=abc,1234" \
@@ -5282,6 +5586,7 @@
             -c "Application Layer Protocol is (none)" \
             -S "Application Layer Protocol is"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "ALPN: server only" \
             "$P_SRV debug_level=3 alpn=abc,1234" \
             "$P_CLI debug_level=3" \
@@ -5294,6 +5599,7 @@
             -C "Application Layer Protocol is" \
             -s "Application Layer Protocol is (none)"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "ALPN: both, common cli1-srv1" \
             "$P_SRV debug_level=3 alpn=abc,1234" \
             "$P_CLI debug_level=3 alpn=abc,1234" \
@@ -5306,6 +5612,7 @@
             -c "Application Layer Protocol is abc" \
             -s "Application Layer Protocol is abc"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "ALPN: both, common cli2-srv1" \
             "$P_SRV debug_level=3 alpn=abc,1234" \
             "$P_CLI debug_level=3 alpn=1234,abc" \
@@ -5318,6 +5625,7 @@
             -c "Application Layer Protocol is abc" \
             -s "Application Layer Protocol is abc"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "ALPN: both, common cli1-srv2" \
             "$P_SRV debug_level=3 alpn=abc,1234" \
             "$P_CLI debug_level=3 alpn=1234,abcde" \
@@ -5330,6 +5638,7 @@
             -c "Application Layer Protocol is 1234" \
             -s "Application Layer Protocol is 1234"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "ALPN: both, no common" \
             "$P_SRV debug_level=3 alpn=abc,123" \
             "$P_CLI debug_level=3 alpn=1234,abcde" \
@@ -5346,6 +5655,7 @@
 # Tests for keyUsage in leaf certificates, part 1:
 # server-side certificate/suite selection
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "keyUsage srv: RSA, digitalSignature -> (EC)DHE-RSA" \
             "$P_SRV key_file=data_files/server2.key \
              crt_file=data_files/server2.ku-ds.crt" \
@@ -5354,6 +5664,7 @@
             -c "Ciphersuite is TLS-[EC]*DHE-RSA-WITH-"
 
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "keyUsage srv: RSA, keyEncipherment -> RSA" \
             "$P_SRV key_file=data_files/server2.key \
              crt_file=data_files/server2.ku-ke.crt" \
@@ -5361,6 +5672,7 @@
             0 \
             -c "Ciphersuite is TLS-RSA-WITH-"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "keyUsage srv: RSA, keyAgreement -> fail" \
             "$P_SRV key_file=data_files/server2.key \
              crt_file=data_files/server2.ku-ka.crt" \
@@ -5368,6 +5680,7 @@
             1 \
             -C "Ciphersuite is "
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "keyUsage srv: ECDSA, digitalSignature -> ECDHE-ECDSA" \
             "$P_SRV key_file=data_files/server5.key \
              crt_file=data_files/server5.ku-ds.crt" \
@@ -5376,6 +5689,7 @@
             -c "Ciphersuite is TLS-ECDHE-ECDSA-WITH-"
 
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "keyUsage srv: ECDSA, keyAgreement -> ECDH-" \
             "$P_SRV key_file=data_files/server5.key \
              crt_file=data_files/server5.ku-ka.crt" \
@@ -5383,6 +5697,7 @@
             0 \
             -c "Ciphersuite is TLS-ECDH-"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "keyUsage srv: ECDSA, keyEncipherment -> fail" \
             "$P_SRV key_file=data_files/server5.key \
              crt_file=data_files/server5.ku-ke.crt" \
@@ -5393,6 +5708,7 @@
 # Tests for keyUsage in leaf certificates, part 2:
 # client-side checking of server cert
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "keyUsage cli: DigitalSignature+KeyEncipherment, RSA: OK" \
             "$O_SRV -key data_files/server2.key \
              -cert data_files/server2.ku-ds_ke.crt" \
@@ -5403,6 +5719,7 @@
             -C "Processing of the Certificate handshake message failed" \
             -c "Ciphersuite is TLS-"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "keyUsage cli: DigitalSignature+KeyEncipherment, DHE-RSA: OK" \
             "$O_SRV -key data_files/server2.key \
              -cert data_files/server2.ku-ds_ke.crt" \
@@ -5413,6 +5730,7 @@
             -C "Processing of the Certificate handshake message failed" \
             -c "Ciphersuite is TLS-"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "keyUsage cli: KeyEncipherment, RSA: OK" \
             "$O_SRV -key data_files/server2.key \
              -cert data_files/server2.ku-ke.crt" \
@@ -5423,6 +5741,7 @@
             -C "Processing of the Certificate handshake message failed" \
             -c "Ciphersuite is TLS-"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "keyUsage cli: KeyEncipherment, DHE-RSA: fail" \
             "$O_SRV -key data_files/server2.key \
              -cert data_files/server2.ku-ke.crt" \
@@ -5433,6 +5752,7 @@
             -c "Processing of the Certificate handshake message failed" \
             -C "Ciphersuite is TLS-"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "keyUsage cli: KeyEncipherment, DHE-RSA: fail, soft" \
             "$O_SRV -key data_files/server2.key \
              -cert data_files/server2.ku-ke.crt" \
@@ -5444,6 +5764,7 @@
             -c "Ciphersuite is TLS-" \
             -c "! Usage does not match the keyUsage extension"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "keyUsage cli: DigitalSignature, DHE-RSA: OK" \
             "$O_SRV -key data_files/server2.key \
              -cert data_files/server2.ku-ds.crt" \
@@ -5454,6 +5775,7 @@
             -C "Processing of the Certificate handshake message failed" \
             -c "Ciphersuite is TLS-"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "keyUsage cli: DigitalSignature, RSA: fail" \
             "$O_SRV -key data_files/server2.key \
              -cert data_files/server2.ku-ds.crt" \
@@ -5464,6 +5786,7 @@
             -c "Processing of the Certificate handshake message failed" \
             -C "Ciphersuite is TLS-"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "keyUsage cli: DigitalSignature, RSA: fail, soft" \
             "$O_SRV -key data_files/server2.key \
              -cert data_files/server2.ku-ds.crt" \
@@ -5478,6 +5801,7 @@
 # Tests for keyUsage in leaf certificates, part 3:
 # server-side checking of client cert
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "keyUsage cli-auth: RSA, DigitalSignature: OK" \
             "$P_SRV debug_level=1 auth_mode=optional" \
             "$O_CLI -key data_files/server2.key \
@@ -5486,6 +5810,7 @@
             -S "bad certificate (usage extensions)" \
             -S "Processing of the Certificate handshake message failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "keyUsage cli-auth: RSA, KeyEncipherment: fail (soft)" \
             "$P_SRV debug_level=1 auth_mode=optional" \
             "$O_CLI -key data_files/server2.key \
@@ -5494,6 +5819,7 @@
             -s "bad certificate (usage extensions)" \
             -S "Processing of the Certificate handshake message failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "keyUsage cli-auth: RSA, KeyEncipherment: fail (hard)" \
             "$P_SRV debug_level=1 auth_mode=required" \
             "$O_CLI -key data_files/server2.key \
@@ -5502,6 +5828,7 @@
             -s "bad certificate (usage extensions)" \
             -s "Processing of the Certificate handshake message failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "keyUsage cli-auth: ECDSA, DigitalSignature: OK" \
             "$P_SRV debug_level=1 auth_mode=optional" \
             "$O_CLI -key data_files/server5.key \
@@ -5510,6 +5837,7 @@
             -S "bad certificate (usage extensions)" \
             -S "Processing of the Certificate handshake message failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "keyUsage cli-auth: ECDSA, KeyAgreement: fail (soft)" \
             "$P_SRV debug_level=1 auth_mode=optional" \
             "$O_CLI -key data_files/server5.key \
@@ -5520,24 +5848,28 @@
 
 # Tests for extendedKeyUsage, part 1: server-side certificate/suite selection
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "extKeyUsage srv: serverAuth -> OK" \
             "$P_SRV key_file=data_files/server5.key \
              crt_file=data_files/server5.eku-srv.crt" \
             "$P_CLI" \
             0
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "extKeyUsage srv: serverAuth,clientAuth -> OK" \
             "$P_SRV key_file=data_files/server5.key \
              crt_file=data_files/server5.eku-srv.crt" \
             "$P_CLI" \
             0
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "extKeyUsage srv: codeSign,anyEKU -> OK" \
             "$P_SRV key_file=data_files/server5.key \
              crt_file=data_files/server5.eku-cs_any.crt" \
             "$P_CLI" \
             0
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "extKeyUsage srv: codeSign -> fail" \
             "$P_SRV key_file=data_files/server5.key \
              crt_file=data_files/server5.eku-cli.crt" \
@@ -5546,6 +5878,7 @@
 
 # Tests for extendedKeyUsage, part 2: client-side checking of server cert
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "extKeyUsage cli: serverAuth -> OK" \
             "$O_SRV -key data_files/server5.key \
              -cert data_files/server5.eku-srv.crt" \
@@ -5555,6 +5888,7 @@
             -C "Processing of the Certificate handshake message failed" \
             -c "Ciphersuite is TLS-"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "extKeyUsage cli: serverAuth,clientAuth -> OK" \
             "$O_SRV -key data_files/server5.key \
              -cert data_files/server5.eku-srv_cli.crt" \
@@ -5564,6 +5898,7 @@
             -C "Processing of the Certificate handshake message failed" \
             -c "Ciphersuite is TLS-"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "extKeyUsage cli: codeSign,anyEKU -> OK" \
             "$O_SRV -key data_files/server5.key \
              -cert data_files/server5.eku-cs_any.crt" \
@@ -5573,6 +5908,7 @@
             -C "Processing of the Certificate handshake message failed" \
             -c "Ciphersuite is TLS-"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "extKeyUsage cli: codeSign -> fail" \
             "$O_SRV -key data_files/server5.key \
              -cert data_files/server5.eku-cs.crt" \
@@ -5584,6 +5920,7 @@
 
 # Tests for extendedKeyUsage, part 3: server-side checking of client cert
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "extKeyUsage cli-auth: clientAuth -> OK" \
             "$P_SRV debug_level=1 auth_mode=optional" \
             "$O_CLI -key data_files/server5.key \
@@ -5592,6 +5929,7 @@
             -S "bad certificate (usage extensions)" \
             -S "Processing of the Certificate handshake message failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "extKeyUsage cli-auth: serverAuth,clientAuth -> OK" \
             "$P_SRV debug_level=1 auth_mode=optional" \
             "$O_CLI -key data_files/server5.key \
@@ -5600,6 +5938,7 @@
             -S "bad certificate (usage extensions)" \
             -S "Processing of the Certificate handshake message failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "extKeyUsage cli-auth: codeSign,anyEKU -> OK" \
             "$P_SRV debug_level=1 auth_mode=optional" \
             "$O_CLI -key data_files/server5.key \
@@ -5608,6 +5947,7 @@
             -S "bad certificate (usage extensions)" \
             -S "Processing of the Certificate handshake message failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "extKeyUsage cli-auth: codeSign -> fail (soft)" \
             "$P_SRV debug_level=1 auth_mode=optional" \
             "$O_CLI -key data_files/server5.key \
@@ -5616,6 +5956,7 @@
             -s "bad certificate (usage extensions)" \
             -S "Processing of the Certificate handshake message failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "extKeyUsage cli-auth: codeSign -> fail (hard)" \
             "$P_SRV debug_level=1 auth_mode=required" \
             "$O_CLI -key data_files/server5.key \
@@ -5626,6 +5967,7 @@
 
 # Tests for DHM parameters loading
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DHM parameters: reference" \
             "$P_SRV" \
             "$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
@@ -5634,6 +5976,7 @@
             -c "value of 'DHM: P ' (2048 bits)" \
             -c "value of 'DHM: G ' (2 bits)"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DHM parameters: other parameters" \
             "$P_SRV dhm_file=data_files/dhparams.pem" \
             "$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
@@ -5644,6 +5987,7 @@
 
 # Tests for DHM client-side size checking
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DHM size: server default, client default, OK" \
             "$P_SRV" \
             "$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
@@ -5651,6 +5995,7 @@
             0 \
             -C "DHM prime too short:"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DHM size: server default, client 2048, OK" \
             "$P_SRV" \
             "$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
@@ -5658,6 +6003,7 @@
             0 \
             -C "DHM prime too short:"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DHM size: server 1024, client default, OK" \
             "$P_SRV dhm_file=data_files/dhparams.pem" \
             "$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
@@ -5665,6 +6011,7 @@
             0 \
             -C "DHM prime too short:"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DHM size: server 999, client 999, OK" \
             "$P_SRV dhm_file=data_files/dh.999.pem" \
             "$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
@@ -5672,6 +6019,7 @@
             0 \
             -C "DHM prime too short:"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DHM size: server 1000, client 1000, OK" \
             "$P_SRV dhm_file=data_files/dh.1000.pem" \
             "$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
@@ -5679,6 +6027,7 @@
             0 \
             -C "DHM prime too short:"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DHM size: server 1000, client default, rejected" \
             "$P_SRV dhm_file=data_files/dh.1000.pem" \
             "$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
@@ -5686,6 +6035,7 @@
             1 \
             -c "DHM prime too short:"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DHM size: server 1000, client 1001, rejected" \
             "$P_SRV dhm_file=data_files/dh.1000.pem" \
             "$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
@@ -5693,6 +6043,7 @@
             1 \
             -c "DHM prime too short:"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DHM size: server 999, client 1000, rejected" \
             "$P_SRV dhm_file=data_files/dh.999.pem" \
             "$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
@@ -5700,6 +6051,7 @@
             1 \
             -c "DHM prime too short:"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DHM size: server 998, client 999, rejected" \
             "$P_SRV dhm_file=data_files/dh.998.pem" \
             "$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
@@ -5707,6 +6059,7 @@
             1 \
             -c "DHM prime too short:"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DHM size: server default, client 2049, rejected" \
             "$P_SRV" \
             "$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
@@ -5716,6 +6069,7 @@
 
 # Tests for PSK callback
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "PSK callback: psk, no callback" \
             "$P_SRV psk=abc123 psk_identity=foo" \
             "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
@@ -5726,6 +6080,7 @@
             -S "SSL - Verification of the message MAC failed"
 
 requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "PSK callback: opaque psk on client, no callback" \
             "$P_SRV extended_ms=0 debug_level=1 psk=abc123 psk_identity=foo" \
             "$P_CLI extended_ms=0 debug_level=1 min_version=tls12 force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
@@ -5740,6 +6095,7 @@
             -S "SSL - Verification of the message MAC failed"
 
 requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "PSK callback: opaque psk on client, no callback, SHA-384" \
             "$P_SRV extended_ms=0 debug_level=1 psk=abc123 psk_identity=foo" \
             "$P_CLI extended_ms=0 debug_level=1 min_version=tls12 force_ciphersuite=TLS-PSK-WITH-AES-256-CBC-SHA384 \
@@ -5754,6 +6110,7 @@
             -S "SSL - Verification of the message MAC failed"
 
 requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "PSK callback: opaque psk on client, no callback, EMS" \
             "$P_SRV extended_ms=1 debug_level=3 psk=abc123 psk_identity=foo" \
             "$P_CLI extended_ms=1 debug_level=3 min_version=tls12 force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
@@ -5768,6 +6125,7 @@
             -S "SSL - Verification of the message MAC failed"
 
 requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "PSK callback: opaque psk on client, no callback, SHA-384, EMS" \
             "$P_SRV extended_ms=1 debug_level=3 psk=abc123 psk_identity=foo" \
             "$P_CLI extended_ms=1 debug_level=3 min_version=tls12 force_ciphersuite=TLS-PSK-WITH-AES-256-CBC-SHA384 \
@@ -5782,6 +6140,7 @@
             -S "SSL - Verification of the message MAC failed"
 
 requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "PSK callback: raw psk on client, static opaque on server, no callback" \
             "$P_SRV extended_ms=0 debug_level=1 psk=abc123 psk_identity=foo psk_opaque=1 min_version=tls12 force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA" \
             "$P_CLI extended_ms=0 debug_level=1 min_version=tls12 force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
@@ -5796,6 +6155,7 @@
             -S "SSL - Verification of the message MAC failed"
 
 requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "PSK callback: raw psk on client, static opaque on server, no callback, SHA-384" \
             "$P_SRV extended_ms=0 debug_level=1 psk=abc123 psk_identity=foo psk_opaque=1 min_version=tls12 force_ciphersuite=TLS-PSK-WITH-AES-256-CBC-SHA384" \
             "$P_CLI extended_ms=0 debug_level=1 min_version=tls12 force_ciphersuite=TLS-PSK-WITH-AES-256-CBC-SHA384 \
@@ -5810,6 +6170,7 @@
             -S "SSL - Verification of the message MAC failed"
 
 requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "PSK callback: raw psk on client, static opaque on server, no callback, EMS" \
             "$P_SRV debug_level=3 psk=abc123 psk_identity=foo psk_opaque=1 min_version=tls12 \
             force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA extended_ms=1" \
@@ -5825,6 +6186,7 @@
             -S "SSL - Verification of the message MAC failed"
 
 requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "PSK callback: raw psk on client, static opaque on server, no callback, EMS, SHA384" \
             "$P_SRV debug_level=3 psk=abc123 psk_identity=foo psk_opaque=1 min_version=tls12 \
             force_ciphersuite=TLS-PSK-WITH-AES-256-CBC-SHA384 extended_ms=1" \
@@ -5840,6 +6202,7 @@
             -S "SSL - Verification of the message MAC failed"
 
 requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "PSK callback: raw psk on client, no static PSK on server, opaque PSK from callback" \
             "$P_SRV extended_ms=0 debug_level=3 psk_list=abc,dead,def,beef psk_list_opaque=1 min_version=tls12 force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA" \
             "$P_CLI extended_ms=0 debug_level=3 min_version=tls12 force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
@@ -5854,6 +6217,7 @@
             -S "SSL - Verification of the message MAC failed"
 
 requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "PSK callback: raw psk on client, no static PSK on server, opaque PSK from callback, SHA-384" \
             "$P_SRV extended_ms=0 debug_level=3 psk_list=abc,dead,def,beef psk_list_opaque=1 min_version=tls12 force_ciphersuite=TLS-PSK-WITH-AES-256-CBC-SHA384" \
             "$P_CLI extended_ms=0 debug_level=3 min_version=tls12 force_ciphersuite=TLS-PSK-WITH-AES-256-CBC-SHA384 \
@@ -5868,6 +6232,7 @@
             -S "SSL - Verification of the message MAC failed"
 
 requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "PSK callback: raw psk on client, no static PSK on server, opaque PSK from callback, EMS" \
             "$P_SRV debug_level=3 psk_list=abc,dead,def,beef psk_list_opaque=1 min_version=tls12 \
             force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA extended_ms=1" \
@@ -5883,6 +6248,7 @@
             -S "SSL - Verification of the message MAC failed"
 
 requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "PSK callback: raw psk on client, no static PSK on server, opaque PSK from callback, EMS, SHA384" \
             "$P_SRV debug_level=3 psk_list=abc,dead,def,beef psk_list_opaque=1 min_version=tls12 \
             force_ciphersuite=TLS-PSK-WITH-AES-256-CBC-SHA384 extended_ms=1" \
@@ -5898,6 +6264,7 @@
             -S "SSL - Verification of the message MAC failed"
 
 requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "PSK callback: raw psk on client, mismatching static raw PSK on server, opaque PSK from callback" \
             "$P_SRV extended_ms=0 psk_identity=foo psk=abc123 debug_level=3 psk_list=abc,dead,def,beef psk_list_opaque=1 min_version=tls12 force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA" \
             "$P_CLI extended_ms=0 debug_level=3 min_version=tls12 force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
@@ -5912,6 +6279,7 @@
             -S "SSL - Verification of the message MAC failed"
 
 requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "PSK callback: raw psk on client, mismatching static opaque PSK on server, opaque PSK from callback" \
             "$P_SRV extended_ms=0 psk_opaque=1 psk_identity=foo psk=abc123 debug_level=3 psk_list=abc,dead,def,beef psk_list_opaque=1 min_version=tls12 force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA" \
             "$P_CLI extended_ms=0 debug_level=3 min_version=tls12 force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
@@ -5926,6 +6294,7 @@
             -S "SSL - Verification of the message MAC failed"
 
 requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "PSK callback: raw psk on client, mismatching static opaque PSK on server, raw PSK from callback" \
             "$P_SRV extended_ms=0 psk_opaque=1 psk_identity=foo psk=abc123 debug_level=3 psk_list=abc,dead,def,beef min_version=tls12 force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA" \
             "$P_CLI extended_ms=0 debug_level=3 min_version=tls12 force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
@@ -5939,6 +6308,7 @@
             -S "SSL - Verification of the message MAC failed"
 
 requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "PSK callback: raw psk on client, id-matching but wrong raw PSK on server, opaque PSK from callback" \
             "$P_SRV extended_ms=0 psk_opaque=1 psk_identity=def psk=abc123 debug_level=3 psk_list=abc,dead,def,beef min_version=tls12 force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA" \
             "$P_CLI extended_ms=0 debug_level=3 min_version=tls12 force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
@@ -5952,6 +6322,7 @@
             -S "SSL - Verification of the message MAC failed"
 
 requires_config_enabled MBEDTLS_USE_PSA_CRYPTO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "PSK callback: raw psk on client, matching opaque PSK on server, wrong opaque PSK from callback" \
             "$P_SRV extended_ms=0 psk_opaque=1 psk_identity=def psk=beef debug_level=3 psk_list=abc,dead,def,abc123 min_version=tls12 force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA" \
             "$P_CLI extended_ms=0 debug_level=3 min_version=tls12 force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
@@ -5959,6 +6330,7 @@
             1 \
             -s "SSL - Verification of the message MAC failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "PSK callback: no psk, no callback" \
             "$P_SRV" \
             "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
@@ -5968,6 +6340,7 @@
             -S "SSL - Unknown identity received" \
             -S "SSL - Verification of the message MAC failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "PSK callback: callback overrides other settings" \
             "$P_SRV psk=abc123 psk_identity=foo psk_list=abc,dead,def,beef" \
             "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
@@ -5977,6 +6350,7 @@
             -s "SSL - Unknown identity received" \
             -S "SSL - Verification of the message MAC failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "PSK callback: first id matches" \
             "$P_SRV psk_list=abc,dead,def,beef" \
             "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
@@ -5986,6 +6360,7 @@
             -S "SSL - Unknown identity received" \
             -S "SSL - Verification of the message MAC failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "PSK callback: second id matches" \
             "$P_SRV psk_list=abc,dead,def,beef" \
             "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
@@ -5995,6 +6370,7 @@
             -S "SSL - Unknown identity received" \
             -S "SSL - Verification of the message MAC failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "PSK callback: no match" \
             "$P_SRV psk_list=abc,dead,def,beef" \
             "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
@@ -6004,6 +6380,7 @@
             -s "SSL - Unknown identity received" \
             -S "SSL - Verification of the message MAC failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "PSK callback: wrong key" \
             "$P_SRV psk_list=abc,dead,def,beef" \
             "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
@@ -6016,6 +6393,7 @@
 # Tests for EC J-PAKE
 
 requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "ECJPAKE: client not configured" \
             "$P_SRV debug_level=3" \
             "$P_CLI debug_level=3" \
@@ -6030,6 +6408,7 @@
             -S "SSL - The handshake negotiation failed"
 
 requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "ECJPAKE: server not configured" \
             "$P_SRV debug_level=3" \
             "$P_CLI debug_level=3 ecjpake_pw=bla \
@@ -6045,6 +6424,7 @@
             -s "SSL - The handshake negotiation failed"
 
 requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "ECJPAKE: working, TLS" \
             "$P_SRV debug_level=3 ecjpake_pw=bla" \
             "$P_CLI debug_level=3 ecjpake_pw=bla \
@@ -6063,6 +6443,7 @@
 
 server_needs_more_time 1
 requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "ECJPAKE: password mismatch, TLS" \
             "$P_SRV debug_level=3 ecjpake_pw=bla" \
             "$P_CLI debug_level=3 ecjpake_pw=bad \
@@ -6072,6 +6453,7 @@
             -s "SSL - Verification of the message MAC failed"
 
 requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "ECJPAKE: working, DTLS" \
             "$P_SRV debug_level=3 dtls=1 ecjpake_pw=bla" \
             "$P_CLI debug_level=3 dtls=1 ecjpake_pw=bla \
@@ -6081,6 +6463,7 @@
             -S "SSL - Verification of the message MAC failed"
 
 requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "ECJPAKE: working, DTLS, no cookie" \
             "$P_SRV debug_level=3 dtls=1 ecjpake_pw=bla cookies=0" \
             "$P_CLI debug_level=3 dtls=1 ecjpake_pw=bla \
@@ -6091,6 +6474,7 @@
 
 server_needs_more_time 1
 requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "ECJPAKE: password mismatch, DTLS" \
             "$P_SRV debug_level=3 dtls=1 ecjpake_pw=bla" \
             "$P_CLI debug_level=3 dtls=1 ecjpake_pw=bad \
@@ -6101,6 +6485,7 @@
 
 # for tests with configs/config-thread.h
 requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "ECJPAKE: working, DTLS, nolog" \
             "$P_SRV dtls=1 ecjpake_pw=bla" \
             "$P_CLI dtls=1 ecjpake_pw=bla \
@@ -6110,6 +6495,7 @@
 # Test for ClientHello without extensions
 
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "ClientHello without extensions" \
             "$P_SRV debug_level=3" \
             "$G_CLI --priority=NORMAL:%NO_EXTENSIONS:%DISABLE_SAFE_RENEGOTIATION localhost" \
@@ -6118,12 +6504,14 @@
 
 # Tests for mbedtls_ssl_get_bytes_avail()
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "mbedtls_ssl_get_bytes_avail: no extra data" \
             "$P_SRV" \
             "$P_CLI request_size=100" \
             0 \
             -s "Read from client: 100 bytes read$"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "mbedtls_ssl_get_bytes_avail: extra data" \
             "$P_SRV" \
             "$P_CLI request_size=500" \
@@ -6132,6 +6520,7 @@
 
 # Tests for small client packets
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Small client packet TLS 1.2 BlockCipher" \
             "$P_SRV" \
             "$P_CLI request_size=1 force_version=tls12 \
@@ -6139,6 +6528,7 @@
             0 \
             -s "Read from client: 1 bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Small client packet TLS 1.2 BlockCipher, without EtM" \
             "$P_SRV" \
             "$P_CLI request_size=1 force_version=tls12 \
@@ -6146,6 +6536,7 @@
             0 \
             -s "Read from client: 1 bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Small client packet TLS 1.2 BlockCipher larger MAC" \
             "$P_SRV" \
             "$P_CLI request_size=1 force_version=tls12 \
@@ -6153,6 +6544,7 @@
             0 \
             -s "Read from client: 1 bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Small client packet TLS 1.2 AEAD" \
             "$P_SRV" \
             "$P_CLI request_size=1 force_version=tls12 \
@@ -6160,6 +6552,7 @@
             0 \
             -s "Read from client: 1 bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Small client packet TLS 1.2 AEAD shorter tag" \
             "$P_SRV" \
             "$P_CLI request_size=1 force_version=tls12 \
@@ -6170,6 +6563,7 @@
 # Tests for small client packets in DTLS
 
 requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Small client packet DTLS 1.2" \
             "$P_SRV dtls=1 force_version=dtls12" \
             "$P_CLI dtls=1 request_size=1 \
@@ -6178,6 +6572,7 @@
             -s "Read from client: 1 bytes read"
 
 requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Small client packet DTLS 1.2, without EtM" \
             "$P_SRV dtls=1 force_version=dtls12 etm=0" \
             "$P_CLI dtls=1 request_size=1 \
@@ -6187,6 +6582,7 @@
 
 # Tests for small server packets
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Small server packet TLS 1.2 BlockCipher" \
             "$P_SRV response_size=1" \
             "$P_CLI force_version=tls12 \
@@ -6194,6 +6590,7 @@
             0 \
             -c "Read from server: 1 bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Small server packet TLS 1.2 BlockCipher, without EtM" \
             "$P_SRV response_size=1" \
             "$P_CLI force_version=tls12 \
@@ -6201,6 +6598,7 @@
             0 \
             -c "Read from server: 1 bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Small server packet TLS 1.2 BlockCipher larger MAC" \
             "$P_SRV response_size=1" \
             "$P_CLI force_version=tls12 \
@@ -6208,6 +6606,7 @@
             0 \
             -c "Read from server: 1 bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Small server packet TLS 1.2 AEAD" \
             "$P_SRV response_size=1" \
             "$P_CLI force_version=tls12 \
@@ -6215,6 +6614,7 @@
             0 \
             -c "Read from server: 1 bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Small server packet TLS 1.2 AEAD shorter tag" \
             "$P_SRV response_size=1" \
             "$P_CLI force_version=tls12 \
@@ -6225,6 +6625,7 @@
 # Tests for small server packets in DTLS
 
 requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Small server packet DTLS 1.2" \
             "$P_SRV dtls=1 response_size=1 force_version=dtls12" \
             "$P_CLI dtls=1 \
@@ -6233,6 +6634,7 @@
             -c "Read from server: 1 bytes read"
 
 requires_config_enabled MBEDTLS_SSL_PROTO_DTLS
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Small server packet DTLS 1.2, without EtM" \
             "$P_SRV dtls=1 response_size=1 force_version=dtls12 etm=0" \
             "$P_CLI dtls=1 \
@@ -6247,6 +6649,7 @@
     echo "$(( ( $1 + $MAX_OUT_LEN - 1 ) / $MAX_OUT_LEN ))"
 }
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Large client packet TLS 1.2 BlockCipher" \
             "$P_SRV" \
             "$P_CLI request_size=16384 force_version=tls12 \
@@ -6255,6 +6658,7 @@
             -c "16384 bytes written in $(fragments_for_write 16384) fragments" \
             -s "Read from client: $MAX_CONTENT_LEN bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Large client packet TLS 1.2 BlockCipher, without EtM" \
             "$P_SRV" \
             "$P_CLI request_size=16384 force_version=tls12 etm=0 \
@@ -6262,6 +6666,7 @@
             0 \
             -s "Read from client: $MAX_CONTENT_LEN bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Large client packet TLS 1.2 BlockCipher larger MAC" \
             "$P_SRV" \
             "$P_CLI request_size=16384 force_version=tls12 \
@@ -6270,6 +6675,7 @@
             -c "16384 bytes written in $(fragments_for_write 16384) fragments" \
             -s "Read from client: $MAX_CONTENT_LEN bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Large client packet TLS 1.2 AEAD" \
             "$P_SRV" \
             "$P_CLI request_size=16384 force_version=tls12 \
@@ -6278,6 +6684,7 @@
             -c "16384 bytes written in $(fragments_for_write 16384) fragments" \
             -s "Read from client: $MAX_CONTENT_LEN bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Large client packet TLS 1.2 AEAD shorter tag" \
             "$P_SRV" \
             "$P_CLI request_size=16384 force_version=tls12 \
@@ -6287,6 +6694,7 @@
             -s "Read from client: $MAX_CONTENT_LEN bytes read"
 
 # The tests below fail when the server's OUT_CONTENT_LEN is less than 16384.
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Large server packet TLS 1.2 BlockCipher" \
             "$P_SRV response_size=16384" \
             "$P_CLI force_version=tls12 \
@@ -6294,6 +6702,7 @@
             0 \
             -c "Read from server: 16384 bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Large server packet TLS 1.2 BlockCipher, without EtM" \
             "$P_SRV response_size=16384" \
             "$P_CLI force_version=tls12 etm=0 \
@@ -6302,6 +6711,7 @@
             -s "16384 bytes written in 1 fragments" \
             -c "Read from server: 16384 bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Large server packet TLS 1.2 BlockCipher larger MAC" \
             "$P_SRV response_size=16384" \
             "$P_CLI force_version=tls12 \
@@ -6309,6 +6719,7 @@
             0 \
             -c "Read from server: 16384 bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Large server packet TLS 1.2 BlockCipher, without EtM, truncated MAC" \
             "$P_SRV response_size=16384 trunc_hmac=1" \
             "$P_CLI force_version=tls12 \
@@ -6317,6 +6728,7 @@
             -s "16384 bytes written in 1 fragments" \
             -c "Read from server: 16384 bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Large server packet TLS 1.2 AEAD" \
             "$P_SRV response_size=16384" \
             "$P_CLI force_version=tls12 \
@@ -6324,6 +6736,7 @@
             0 \
             -c "Read from server: 16384 bytes read"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Large server packet TLS 1.2 AEAD shorter tag" \
             "$P_SRV response_size=16384" \
             "$P_CLI force_version=tls12 \
@@ -6337,6 +6750,7 @@
 
 requires_config_enabled MBEDTLS_ECP_RESTARTABLE
 requires_config_enabled MBEDTLS_ECP_DP_SECP256R1_ENABLED
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "EC restart: TLS, default" \
             "$P_SRV curves=secp256r1 auth_mode=required" \
             "$P_CLI force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256 \
@@ -6350,6 +6764,7 @@
 
 requires_config_enabled MBEDTLS_ECP_RESTARTABLE
 requires_config_enabled MBEDTLS_ECP_DP_SECP256R1_ENABLED
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "EC restart: TLS, max_ops=0" \
             "$P_SRV curves=secp256r1 auth_mode=required" \
             "$P_CLI force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256 \
@@ -6363,6 +6778,7 @@
 
 requires_config_enabled MBEDTLS_ECP_RESTARTABLE
 requires_config_enabled MBEDTLS_ECP_DP_SECP256R1_ENABLED
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "EC restart: TLS, max_ops=65535" \
             "$P_SRV curves=secp256r1 auth_mode=required" \
             "$P_CLI force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256 \
@@ -6376,6 +6792,7 @@
 
 requires_config_enabled MBEDTLS_ECP_RESTARTABLE
 requires_config_enabled MBEDTLS_ECP_DP_SECP256R1_ENABLED
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "EC restart: TLS, max_ops=1000" \
             "$P_SRV curves=secp256r1 auth_mode=required" \
             "$P_CLI force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256 \
@@ -6389,6 +6806,7 @@
 
 requires_config_enabled MBEDTLS_ECP_RESTARTABLE
 requires_config_enabled MBEDTLS_ECP_DP_SECP256R1_ENABLED
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "EC restart: TLS, max_ops=1000, badsign" \
             "$P_SRV curves=secp256r1 auth_mode=required \
              crt_file=data_files/server5-badsign.crt \
@@ -6407,6 +6825,7 @@
 
 requires_config_enabled MBEDTLS_ECP_RESTARTABLE
 requires_config_enabled MBEDTLS_ECP_DP_SECP256R1_ENABLED
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "EC restart: TLS, max_ops=1000, auth_mode=optional badsign" \
             "$P_SRV curves=secp256r1 auth_mode=required \
              crt_file=data_files/server5-badsign.crt \
@@ -6425,6 +6844,7 @@
 
 requires_config_enabled MBEDTLS_ECP_RESTARTABLE
 requires_config_enabled MBEDTLS_ECP_DP_SECP256R1_ENABLED
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "EC restart: TLS, max_ops=1000, auth_mode=none badsign" \
             "$P_SRV curves=secp256r1 auth_mode=required \
              crt_file=data_files/server5-badsign.crt \
@@ -6443,6 +6863,7 @@
 
 requires_config_enabled MBEDTLS_ECP_RESTARTABLE
 requires_config_enabled MBEDTLS_ECP_DP_SECP256R1_ENABLED
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "EC restart: DTLS, max_ops=1000" \
             "$P_SRV curves=secp256r1 auth_mode=required dtls=1" \
             "$P_CLI force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256 \
@@ -6456,6 +6877,7 @@
 
 requires_config_enabled MBEDTLS_ECP_RESTARTABLE
 requires_config_enabled MBEDTLS_ECP_DP_SECP256R1_ENABLED
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "EC restart: TLS, max_ops=1000 no client auth" \
             "$P_SRV curves=secp256r1" \
             "$P_CLI force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256 \
@@ -6468,6 +6890,7 @@
 
 requires_config_enabled MBEDTLS_ECP_RESTARTABLE
 requires_config_enabled MBEDTLS_ECP_DP_SECP256R1_ENABLED
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "EC restart: TLS, max_ops=1000, ECDHE-PSK" \
             "$P_SRV curves=secp256r1 psk=abc123" \
             "$P_CLI force_ciphersuite=TLS-ECDHE-PSK-WITH-AES-128-CBC-SHA256 \
@@ -6481,6 +6904,7 @@
 # Tests of asynchronous private key support in SSL
 
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: sign, delay=0" \
             "$P_SRV \
              async_operations=s async_private_delay1=0 async_private_delay2=0" \
@@ -6490,6 +6914,7 @@
             -s "Async resume (slot [0-9]): sign done, status=0"
 
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: sign, delay=1" \
             "$P_SRV \
              async_operations=s async_private_delay1=1 async_private_delay2=1" \
@@ -6500,6 +6925,7 @@
             -s "Async resume (slot [0-9]): sign done, status=0"
 
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: sign, delay=2" \
             "$P_SRV \
              async_operations=s async_private_delay1=2 async_private_delay2=2" \
@@ -6513,6 +6939,7 @@
 
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
 requires_config_disabled MBEDTLS_X509_REMOVE_INFO
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: sign, SNI" \
             "$P_SRV debug_level=3 \
              async_operations=s async_private_delay1=0 async_private_delay2=0 \
@@ -6527,6 +6954,7 @@
             -c "subject name *: C=NL, O=PolarSSL, CN=polarssl.example"
 
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: decrypt, delay=0" \
             "$P_SRV \
              async_operations=d async_private_delay1=0 async_private_delay2=0" \
@@ -6536,6 +6964,7 @@
             -s "Async resume (slot [0-9]): decrypt done, status=0"
 
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: decrypt, delay=1" \
             "$P_SRV \
              async_operations=d async_private_delay1=1 async_private_delay2=1" \
@@ -6546,6 +6975,7 @@
             -s "Async resume (slot [0-9]): decrypt done, status=0"
 
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: decrypt RSA-PSK, delay=0" \
             "$P_SRV psk=abc123 \
              async_operations=d async_private_delay1=0 async_private_delay2=0" \
@@ -6556,6 +6986,7 @@
             -s "Async resume (slot [0-9]): decrypt done, status=0"
 
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: decrypt RSA-PSK, delay=1" \
             "$P_SRV psk=abc123 \
              async_operations=d async_private_delay1=1 async_private_delay2=1" \
@@ -6567,6 +6998,7 @@
             -s "Async resume (slot [0-9]): decrypt done, status=0"
 
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: sign callback not present" \
             "$P_SRV \
              async_operations=d async_private_delay1=1 async_private_delay2=1" \
@@ -6580,6 +7012,7 @@
             -s "Successful connection"
 
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: decrypt callback not present" \
             "$P_SRV debug_level=1 \
              async_operations=s async_private_delay1=1 async_private_delay2=1" \
@@ -6594,6 +7027,7 @@
 
 # key1: ECDSA, key2: RSA; use key1 from slot 0
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: slot 0 used with key1" \
             "$P_SRV \
              async_operations=s async_private_delay1=1 \
@@ -6607,6 +7041,7 @@
 
 # key1: ECDSA, key2: RSA; use key2 from slot 0
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: slot 0 used with key2" \
             "$P_SRV \
              async_operations=s async_private_delay2=1 \
@@ -6620,6 +7055,7 @@
 
 # key1: ECDSA, key2: RSA; use key2 from slot 1
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: slot 1 used with key2" \
             "$P_SRV \
              async_operations=s async_private_delay1=1 async_private_delay2=1 \
@@ -6633,6 +7069,7 @@
 
 # key1: ECDSA, key2: RSA; use key2 directly
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: fall back to transparent key" \
             "$P_SRV \
              async_operations=s async_private_delay1=1 \
@@ -6643,6 +7080,7 @@
             -s "Async sign callback: no key matches this certificate."
 
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: sign, error in start" \
             "$P_SRV \
              async_operations=s async_private_delay1=1 async_private_delay2=1 \
@@ -6655,6 +7093,7 @@
             -s "! mbedtls_ssl_handshake returned"
 
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: sign, cancel after start" \
             "$P_SRV \
              async_operations=s async_private_delay1=1 async_private_delay2=1 \
@@ -6666,6 +7105,7 @@
             -s "Async cancel"
 
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: sign, error in resume" \
             "$P_SRV \
              async_operations=s async_private_delay1=1 async_private_delay2=1 \
@@ -6678,6 +7118,7 @@
             -s "! mbedtls_ssl_handshake returned"
 
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: decrypt, error in start" \
             "$P_SRV \
              async_operations=d async_private_delay1=1 async_private_delay2=1 \
@@ -6690,6 +7131,7 @@
             -s "! mbedtls_ssl_handshake returned"
 
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: decrypt, cancel after start" \
             "$P_SRV \
              async_operations=d async_private_delay1=1 async_private_delay2=1 \
@@ -6701,6 +7143,7 @@
             -s "Async cancel"
 
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: decrypt, error in resume" \
             "$P_SRV \
              async_operations=d async_private_delay1=1 async_private_delay2=1 \
@@ -6713,6 +7156,7 @@
             -s "! mbedtls_ssl_handshake returned"
 
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: cancel after start then operate correctly" \
             "$P_SRV \
              async_operations=s async_private_delay1=1 async_private_delay2=1 \
@@ -6725,6 +7169,7 @@
             -s "Successful connection"
 
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: error in resume then operate correctly" \
             "$P_SRV \
              async_operations=s async_private_delay1=1 async_private_delay2=1 \
@@ -6737,6 +7182,7 @@
 
 # key1: ECDSA, key2: RSA; use key1 through async, then key2 directly
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: cancel after start then fall back to transparent key" \
             "$P_SRV \
              async_operations=s async_private_delay1=1 async_private_error=-2 \
@@ -6755,6 +7201,7 @@
 
 # key1: ECDSA, key2: RSA; use key1 through async, then key2 directly
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: sign, error in resume then fall back to transparent key" \
             "$P_SRV \
              async_operations=s async_private_delay1=1 async_private_error=-3 \
@@ -6771,6 +7218,7 @@
 
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: renegotiation: client-initiated, sign" \
             "$P_SRV \
              async_operations=s async_private_delay1=1 async_private_delay2=1 \
@@ -6782,6 +7230,7 @@
 
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: renegotiation: server-initiated, sign" \
             "$P_SRV \
              async_operations=s async_private_delay1=1 async_private_delay2=1 \
@@ -6793,6 +7242,7 @@
 
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: renegotiation: client-initiated, decrypt" \
             "$P_SRV \
              async_operations=d async_private_delay1=1 async_private_delay2=1 \
@@ -6805,6 +7255,7 @@
 
 requires_config_enabled MBEDTLS_SSL_ASYNC_PRIVATE
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "SSL async private: renegotiation: server-initiated, decrypt" \
             "$P_SRV \
              async_operations=d async_private_delay1=1 async_private_delay2=1 \
@@ -6821,6 +7272,7 @@
 requires_config_enabled MBEDTLS_CIPHER_MODE_CBC
 requires_config_enabled MBEDTLS_SHA256_C
 requires_config_enabled MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Force a non ECC ciphersuite in the client side" \
             "$P_SRV debug_level=3" \
             "$P_CLI debug_level=3 force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA256" \
@@ -6834,6 +7286,7 @@
 requires_config_enabled MBEDTLS_CIPHER_MODE_CBC
 requires_config_enabled MBEDTLS_SHA256_C
 requires_config_enabled MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Force a non ECC ciphersuite in the server side" \
             "$P_SRV debug_level=3 force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA256" \
             "$P_CLI debug_level=3" \
@@ -6845,6 +7298,7 @@
 requires_config_enabled MBEDTLS_CIPHER_MODE_CBC
 requires_config_enabled MBEDTLS_SHA256_C
 requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Force an ECC ciphersuite in the client side" \
             "$P_SRV debug_level=3" \
             "$P_CLI debug_level=3 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA256" \
@@ -6858,6 +7312,7 @@
 requires_config_enabled MBEDTLS_CIPHER_MODE_CBC
 requires_config_enabled MBEDTLS_SHA256_C
 requires_config_enabled MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "Force an ECC ciphersuite in the server side" \
             "$P_SRV debug_level=3 force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA256" \
             "$P_CLI debug_level=3" \
@@ -6867,6 +7322,7 @@
 
 # Tests for DTLS HelloVerifyRequest
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS cookie: enabled" \
             "$P_SRV dtls=1 debug_level=2" \
             "$P_CLI dtls=1 debug_level=2" \
@@ -6878,6 +7334,7 @@
             -s "hello verification requested" \
             -S "SSL - The requested feature is not available"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS cookie: disabled" \
             "$P_SRV dtls=1 debug_level=2 cookies=0" \
             "$P_CLI dtls=1 debug_level=2" \
@@ -6889,6 +7346,7 @@
             -S "hello verification requested" \
             -S "SSL - The requested feature is not available"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS cookie: default (failing)" \
             "$P_SRV dtls=1 debug_level=2 cookies=-1" \
             "$P_CLI dtls=1 debug_level=2 hs_timeout=100-400" \
@@ -6901,6 +7359,7 @@
             -s "SSL - The requested feature is not available"
 
 requires_ipv6
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS cookie: enabled, IPv6" \
             "$P_SRV dtls=1 debug_level=2 server_addr=::1" \
             "$P_CLI dtls=1 debug_level=2 server_addr=::1" \
@@ -6912,6 +7371,7 @@
             -s "hello verification requested" \
             -S "SSL - The requested feature is not available"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS cookie: enabled, nbio" \
             "$P_SRV dtls=1 nbio=2 debug_level=2" \
             "$P_CLI dtls=1 nbio=2 debug_level=2" \
@@ -6926,6 +7386,7 @@
 # Tests for client reconnecting from the same port with DTLS
 
 not_with_valgrind # spurious resend
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS client reconnect from same port: reference" \
             "$P_SRV dtls=1 exchanges=2 read_timeout=20000 hs_timeout=10000-20000" \
             "$P_CLI dtls=1 exchanges=2 debug_level=2 hs_timeout=10000-20000" \
@@ -6935,6 +7396,7 @@
             -S "Client initiated reconnection from same port"
 
 not_with_valgrind # spurious resend
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS client reconnect from same port: reconnect" \
             "$P_SRV dtls=1 exchanges=2 read_timeout=20000 hs_timeout=10000-20000" \
             "$P_CLI dtls=1 exchanges=2 debug_level=2 hs_timeout=10000-20000 reconnect_hard=1" \
@@ -6944,6 +7406,7 @@
             -s "Client initiated reconnection from same port"
 
 not_with_valgrind # server/client too slow to respond in time (next test has higher timeouts)
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS client reconnect from same port: reconnect, nbio, no valgrind" \
             "$P_SRV dtls=1 exchanges=2 read_timeout=1000 nbio=2" \
             "$P_CLI dtls=1 exchanges=2 debug_level=2 hs_timeout=500-1000 reconnect_hard=1" \
@@ -6952,6 +7415,7 @@
             -s "Client initiated reconnection from same port"
 
 only_with_valgrind # Only with valgrind, do previous test but with higher read_timeout and hs_timeout
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS client reconnect from same port: reconnect, nbio, valgrind" \
             "$P_SRV dtls=1 exchanges=2 read_timeout=2000 nbio=2 hs_timeout=1500-6000" \
             "$P_CLI dtls=1 exchanges=2 debug_level=2 hs_timeout=1500-3000 reconnect_hard=1" \
@@ -6959,6 +7423,7 @@
             -S "The operation timed out" \
             -s "Client initiated reconnection from same port"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS client reconnect from same port: no cookies" \
             "$P_SRV dtls=1 exchanges=2 read_timeout=1000 cookies=0" \
             "$P_CLI dtls=1 exchanges=2 debug_level=2 hs_timeout=500-8000 reconnect_hard=1" \
@@ -6966,6 +7431,7 @@
             -s "The operation timed out" \
             -S "Client initiated reconnection from same port"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS client reconnect from same port: attacker-injected" \
             -p "$P_PXY inject_clihlo=1" \
             "$P_SRV dtls=1 exchanges=2 debug_level=1" \
@@ -6977,18 +7443,21 @@
 # Tests for various cases of client authentication with DTLS
 # (focused on handshake flows and message parsing)
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS client auth: required" \
             "$P_SRV dtls=1 auth_mode=required" \
             "$P_CLI dtls=1" \
             0 \
             -s "Verifying peer X.509 certificate... ok"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS client auth: optional, client has no cert" \
             "$P_SRV dtls=1 auth_mode=optional" \
             "$P_CLI dtls=1 crt_file=none key_file=none" \
             0 \
             -s "! Certificate was missing"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS client auth: none, client has no cert" \
             "$P_SRV dtls=1 auth_mode=none" \
             "$P_CLI dtls=1 crt_file=none key_file=none debug_level=2" \
@@ -6996,6 +7465,7 @@
             -c "skip write certificate$" \
             -s "! Certificate verification was skipped"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS wrong PSK: badmac alert" \
             "$P_SRV dtls=1 psk=abc123 force_ciphersuite=TLS-PSK-WITH-AES-128-GCM-SHA256" \
             "$P_CLI dtls=1 psk=abc124" \
@@ -7006,6 +7476,7 @@
 # Tests for receiving fragmented handshake messages with DTLS
 
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS reassembly: no fragmentation (gnutls server)" \
             "$G_SRV -u --mtu 2048 -a" \
             "$P_CLI dtls=1 debug_level=2" \
@@ -7014,6 +7485,7 @@
             -C "error"
 
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS reassembly: some fragmentation (gnutls server)" \
             "$G_SRV -u --mtu 512" \
             "$P_CLI dtls=1 debug_level=2" \
@@ -7022,6 +7494,7 @@
             -C "error"
 
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS reassembly: more fragmentation (gnutls server)" \
             "$G_SRV -u --mtu 128" \
             "$P_CLI dtls=1 debug_level=2" \
@@ -7030,6 +7503,7 @@
             -C "error"
 
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS reassembly: more fragmentation, nbio (gnutls server)" \
             "$G_SRV -u --mtu 128" \
             "$P_CLI dtls=1 nbio=2 debug_level=2" \
@@ -7039,6 +7513,7 @@
 
 requires_gnutls
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS reassembly: fragmentation, renego (gnutls server)" \
             "$G_SRV -u --mtu 256" \
             "$P_CLI debug_level=3 dtls=1 renegotiation=1 renegotiate=1" \
@@ -7053,6 +7528,7 @@
 
 requires_gnutls
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS reassembly: fragmentation, nbio, renego (gnutls server)" \
             "$G_SRV -u --mtu 256" \
             "$P_CLI debug_level=3 nbio=2 dtls=1 renegotiation=1 renegotiate=1" \
@@ -7065,6 +7541,7 @@
             -C "error" \
             -s "Extra-header:"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS reassembly: no fragmentation (openssl server)" \
             "$O_SRV -dtls -mtu 2048" \
             "$P_CLI dtls=1 debug_level=2" \
@@ -7072,6 +7549,7 @@
             -C "found fragmented DTLS handshake message" \
             -C "error"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS reassembly: some fragmentation (openssl server)" \
             "$O_SRV -dtls -mtu 768" \
             "$P_CLI dtls=1 debug_level=2" \
@@ -7079,6 +7557,7 @@
             -c "found fragmented DTLS handshake message" \
             -C "error"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS reassembly: more fragmentation (openssl server)" \
             "$O_SRV -dtls -mtu 256" \
             "$P_CLI dtls=1 debug_level=2" \
@@ -7086,6 +7565,7 @@
             -c "found fragmented DTLS handshake message" \
             -C "error"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS reassembly: fragmentation, nbio (openssl server)" \
             "$O_SRV -dtls -mtu 256" \
             "$P_CLI dtls=1 nbio=2 debug_level=2" \
@@ -7110,6 +7590,7 @@
 requires_config_enabled MBEDTLS_ECDSA_C
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
 requires_max_content_len 4096
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: none (for reference)" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=required \
              crt_file=data_files/server7_int-ca.crt \
@@ -7131,6 +7612,7 @@
 requires_config_enabled MBEDTLS_ECDSA_C
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: server only (max_frag_len)" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=required \
              crt_file=data_files/server7_int-ca.crt \
@@ -7156,6 +7638,7 @@
 requires_config_enabled MBEDTLS_ECDSA_C
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
 requires_max_content_len 4096
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: server only (more) (max_frag_len)" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=required \
              crt_file=data_files/server7_int-ca.crt \
@@ -7177,6 +7660,7 @@
 requires_config_enabled MBEDTLS_ECDSA_C
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: client-initiated, server only (max_frag_len)" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=none \
              crt_file=data_files/server7_int-ca.crt \
@@ -7205,6 +7689,7 @@
 requires_config_enabled MBEDTLS_ECDSA_C
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: client-initiated, server only (max_frag_len), proxy MTU" \
             -p "$P_PXY mtu=1110" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=none \
@@ -7227,6 +7712,7 @@
 requires_config_enabled MBEDTLS_ECDSA_C
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: client-initiated, both (max_frag_len)" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=required \
              crt_file=data_files/server7_int-ca.crt \
@@ -7255,6 +7741,7 @@
 requires_config_enabled MBEDTLS_ECDSA_C
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: client-initiated, both (max_frag_len), proxy MTU" \
             -p "$P_PXY mtu=1110" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -7276,6 +7763,7 @@
 requires_config_enabled MBEDTLS_RSA_C
 requires_config_enabled MBEDTLS_ECDSA_C
 requires_max_content_len 4096
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: none (for reference) (MTU)" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=required \
              crt_file=data_files/server7_int-ca.crt \
@@ -7296,6 +7784,7 @@
 requires_config_enabled MBEDTLS_RSA_C
 requires_config_enabled MBEDTLS_ECDSA_C
 requires_max_content_len 4096
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: client (MTU)" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=required \
              crt_file=data_files/server7_int-ca.crt \
@@ -7316,6 +7805,7 @@
 requires_config_enabled MBEDTLS_RSA_C
 requires_config_enabled MBEDTLS_ECDSA_C
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: server (MTU)" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=required \
              crt_file=data_files/server7_int-ca.crt \
@@ -7336,6 +7826,7 @@
 requires_config_enabled MBEDTLS_RSA_C
 requires_config_enabled MBEDTLS_ECDSA_C
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: both (MTU=1024)" \
             -p "$P_PXY mtu=1024" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -7362,6 +7853,7 @@
 requires_config_enabled MBEDTLS_AES_C
 requires_config_enabled MBEDTLS_GCM_C
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: both (MTU=512)" \
             -p "$P_PXY mtu=512" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -7394,6 +7886,7 @@
 requires_config_enabled MBEDTLS_AES_C
 requires_config_enabled MBEDTLS_GCM_C
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: proxy MTU: auto-reduction (not valgrind)" \
             -p "$P_PXY mtu=508" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -7419,6 +7912,7 @@
 requires_config_enabled MBEDTLS_AES_C
 requires_config_enabled MBEDTLS_GCM_C
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: proxy MTU: auto-reduction (with valgrind)" \
             -p "$P_PXY mtu=508" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -7443,6 +7937,7 @@
 requires_config_enabled MBEDTLS_RSA_C
 requires_config_enabled MBEDTLS_ECDSA_C
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: proxy MTU, simple handshake (MTU=1024)" \
             -p "$P_PXY mtu=1024" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -7473,6 +7968,7 @@
 requires_config_enabled MBEDTLS_AES_C
 requires_config_enabled MBEDTLS_GCM_C
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: proxy MTU, simple handshake (MTU=512)" \
             -p "$P_PXY mtu=512" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -7497,6 +7993,7 @@
 requires_config_enabled MBEDTLS_RSA_C
 requires_config_enabled MBEDTLS_ECDSA_C
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: proxy MTU, simple handshake, nbio (MTU=1024)" \
             -p "$P_PXY mtu=1024" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -7524,6 +8021,7 @@
 requires_config_enabled MBEDTLS_AES_C
 requires_config_enabled MBEDTLS_GCM_C
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: proxy MTU, simple handshake, nbio (MTU=512)" \
             -p "$P_PXY mtu=512" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -7561,6 +8059,7 @@
 requires_config_enabled MBEDTLS_AES_C
 requires_config_enabled MBEDTLS_GCM_C
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: proxy MTU, resumed handshake" \
             -p "$P_PXY mtu=1450" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -7591,6 +8090,7 @@
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
 requires_config_enabled MBEDTLS_CHACHAPOLY_C
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: proxy MTU, ChachaPoly renego" \
             -p "$P_PXY mtu=512" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -7624,6 +8124,7 @@
 requires_config_enabled MBEDTLS_AES_C
 requires_config_enabled MBEDTLS_GCM_C
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: proxy MTU, AES-GCM renego" \
             -p "$P_PXY mtu=512" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -7657,6 +8158,7 @@
 requires_config_enabled MBEDTLS_AES_C
 requires_config_enabled MBEDTLS_CCM_C
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: proxy MTU, AES-CCM renego" \
             -p "$P_PXY mtu=1024" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -7691,6 +8193,7 @@
 requires_config_enabled MBEDTLS_CIPHER_MODE_CBC
 requires_config_enabled MBEDTLS_SSL_ENCRYPT_THEN_MAC
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: proxy MTU, AES-CBC EtM renego" \
             -p "$P_PXY mtu=1024" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -7724,6 +8227,7 @@
 requires_config_enabled MBEDTLS_AES_C
 requires_config_enabled MBEDTLS_CIPHER_MODE_CBC
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: proxy MTU, AES-CBC non-EtM renego" \
             -p "$P_PXY mtu=1024" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -7754,6 +8258,7 @@
 requires_config_enabled MBEDTLS_GCM_C
 client_needs_more_time 2
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: proxy MTU + 3d" \
             -p "$P_PXY mtu=512 drop=8 delay=8 duplicate=8" \
             "$P_SRV dgram_packing=0 dtls=1 debug_level=2 auth_mode=required \
@@ -7779,6 +8284,7 @@
 requires_config_enabled MBEDTLS_GCM_C
 client_needs_more_time 2
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: proxy MTU + 3d, nbio" \
             -p "$P_PXY mtu=512 drop=8 delay=8 duplicate=8" \
             "$P_SRV dtls=1 debug_level=2 auth_mode=required \
@@ -7805,6 +8311,7 @@
 requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_gnutls
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: gnutls server, DTLS 1.2" \
             "$G_SRV -u" \
             "$P_CLI dtls=1 debug_level=2 \
@@ -7829,6 +8336,7 @@
 requires_gnutls
 requires_not_i686
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: gnutls client, DTLS 1.2" \
             "$P_SRV dtls=1 debug_level=2 \
              crt_file=data_files/server7_int-ca.crt \
@@ -7843,6 +8351,7 @@
 requires_config_enabled MBEDTLS_ECDSA_C
 requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: openssl server, DTLS 1.2" \
             "$O_SRV -dtls1_2 -verify 10" \
             "$P_CLI dtls=1 debug_level=2 \
@@ -7858,6 +8367,7 @@
 requires_config_enabled MBEDTLS_ECDSA_C
 requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: openssl client, DTLS 1.2" \
             "$P_SRV dtls=1 debug_level=2 \
              crt_file=data_files/server7_int-ca.crt \
@@ -7878,6 +8388,7 @@
 requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 client_needs_more_time 4
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: 3d, gnutls server, DTLS 1.2" \
             -p "$P_PXY drop=8 delay=8 duplicate=8" \
             "$G_NEXT_SRV -u" \
@@ -7896,6 +8407,7 @@
 requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 client_needs_more_time 4
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: 3d, gnutls client, DTLS 1.2" \
             -p "$P_PXY drop=8 delay=8 duplicate=8" \
             "$P_SRV dtls=1 debug_level=2 \
@@ -7918,6 +8430,7 @@
 requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 client_needs_more_time 4
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: 3d, openssl server, DTLS 1.2" \
             -p "$P_PXY drop=8 delay=8 duplicate=8" \
             "$O_SRV -dtls1_2 -verify 10" \
@@ -7936,6 +8449,7 @@
 requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 client_needs_more_time 4
 requires_max_content_len 2048
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS fragmenting: 3d, openssl client, DTLS 1.2" \
             -p "$P_PXY drop=8 delay=8 duplicate=8" \
             "$P_SRV dtls=1 debug_level=2 \
@@ -7948,6 +8462,7 @@
 
 # Tests for DTLS-SRTP (RFC 5764)
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP all profiles supported" \
           "$P_SRV dtls=1 use_srtp=1 debug_level=3" \
           "$P_CLI dtls=1 use_srtp=1 debug_level=3" \
@@ -7967,6 +8482,7 @@
 
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server supports all profiles. Client supports one profile." \
           "$P_SRV dtls=1 use_srtp=1 debug_level=3" \
           "$P_CLI dtls=1 use_srtp=1 srtp_force_profile=5 debug_level=3" \
@@ -7985,6 +8501,7 @@
           -C "error"
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server supports one profile. Client supports all profiles." \
           "$P_SRV dtls=1 use_srtp=1 srtp_force_profile=6 debug_level=3" \
           "$P_CLI dtls=1 use_srtp=1 debug_level=3" \
@@ -8003,6 +8520,7 @@
           -C "error"
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server and Client support only one matching profile." \
           "$P_SRV dtls=1 use_srtp=1 srtp_force_profile=2 debug_level=3" \
           "$P_CLI dtls=1 use_srtp=1 srtp_force_profile=2 debug_level=3" \
@@ -8021,6 +8539,7 @@
           -C "error"
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server and Client support only one different profile." \
           "$P_SRV dtls=1 use_srtp=1 srtp_force_profile=2 debug_level=3" \
           "$P_CLI dtls=1 use_srtp=1 srtp_force_profile=6 debug_level=3" \
@@ -8038,6 +8557,7 @@
           -C "error"
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server doesn't support use_srtp extension." \
           "$P_SRV dtls=1 debug_level=3" \
           "$P_CLI dtls=1 use_srtp=1 debug_level=3" \
@@ -8053,6 +8573,7 @@
           -C "error"
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP all profiles supported. mki used" \
           "$P_SRV dtls=1 use_srtp=1 support_mki=1 debug_level=3" \
           "$P_CLI dtls=1 use_srtp=1 mki=542310ab34290481 debug_level=3" \
@@ -8075,6 +8596,7 @@
           -C "error"
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP all profiles supported. server doesn't support mki." \
           "$P_SRV dtls=1 use_srtp=1 debug_level=3" \
           "$P_CLI dtls=1 use_srtp=1 mki=542310ab34290481 debug_level=3" \
@@ -8098,6 +8620,7 @@
           -C "error"
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP all profiles supported. openssl client." \
           "$P_SRV dtls=1 use_srtp=1 debug_level=3" \
           "$O_CLI -dtls -use_srtp SRTP_AES128_CM_SHA1_80:SRTP_AES128_CM_SHA1_32 -keymatexport 'EXTRACTOR-dtls_srtp' -keymatexportlen 60" \
@@ -8111,6 +8634,7 @@
           -c "SRTP Extension negotiated, profile=SRTP_AES128_CM_SHA1_80"
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server supports all profiles. Client supports all profiles, in different order. openssl client." \
           "$P_SRV dtls=1 use_srtp=1 debug_level=3" \
           "$O_CLI -dtls -use_srtp SRTP_AES128_CM_SHA1_32:SRTP_AES128_CM_SHA1_80 -keymatexport 'EXTRACTOR-dtls_srtp' -keymatexportlen 60" \
@@ -8124,6 +8648,7 @@
           -c "SRTP Extension negotiated, profile=SRTP_AES128_CM_SHA1_32"
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server supports all profiles. Client supports one profile. openssl client." \
           "$P_SRV dtls=1 use_srtp=1 debug_level=3" \
           "$O_CLI -dtls -use_srtp SRTP_AES128_CM_SHA1_32 -keymatexport 'EXTRACTOR-dtls_srtp' -keymatexportlen 60" \
@@ -8137,6 +8662,7 @@
           -c "SRTP Extension negotiated, profile=SRTP_AES128_CM_SHA1_32"
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server supports one profile. Client supports all profiles. openssl client." \
           "$P_SRV dtls=1 use_srtp=1 srtp_force_profile=2 debug_level=3" \
           "$O_CLI -dtls -use_srtp SRTP_AES128_CM_SHA1_80:SRTP_AES128_CM_SHA1_32 -keymatexport 'EXTRACTOR-dtls_srtp' -keymatexportlen 60" \
@@ -8150,6 +8676,7 @@
           -c "SRTP Extension negotiated, profile=SRTP_AES128_CM_SHA1_32"
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server and Client support only one matching profile. openssl client." \
           "$P_SRV dtls=1 use_srtp=1 srtp_force_profile=2 debug_level=3" \
           "$O_CLI -dtls -use_srtp SRTP_AES128_CM_SHA1_32 -keymatexport 'EXTRACTOR-dtls_srtp' -keymatexportlen 60" \
@@ -8163,6 +8690,7 @@
           -c "SRTP Extension negotiated, profile=SRTP_AES128_CM_SHA1_32"
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server and Client support only one different profile. openssl client." \
           "$P_SRV dtls=1 use_srtp=1 srtp_force_profile=1 debug_level=3" \
           "$O_CLI -dtls -use_srtp SRTP_AES128_CM_SHA1_32 -keymatexport 'EXTRACTOR-dtls_srtp' -keymatexportlen 60" \
@@ -8175,6 +8703,7 @@
           -C "SRTP Extension negotiated, profile"
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server doesn't support use_srtp extension. openssl client" \
           "$P_SRV dtls=1 debug_level=3" \
           "$O_CLI -dtls -use_srtp SRTP_AES128_CM_SHA1_80:SRTP_AES128_CM_SHA1_32 -keymatexport 'EXTRACTOR-dtls_srtp' -keymatexportlen 60" \
@@ -8185,6 +8714,7 @@
           -C "SRTP Extension negotiated, profile"
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP all profiles supported. openssl server" \
           "$O_SRV -dtls -verify 0 -use_srtp SRTP_AES128_CM_SHA1_80:SRTP_AES128_CM_SHA1_32 -keymatexport 'EXTRACTOR-dtls_srtp' -keymatexportlen 60" \
           "$P_CLI dtls=1 use_srtp=1 debug_level=3" \
@@ -8197,6 +8727,7 @@
           -C "error"
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server supports all profiles. Client supports all profiles, in different order. openssl server." \
           "$O_SRV -dtls -verify 0 -use_srtp SRTP_AES128_CM_SHA1_32:SRTP_AES128_CM_SHA1_80 -keymatexport 'EXTRACTOR-dtls_srtp' -keymatexportlen 60" \
           "$P_CLI dtls=1 use_srtp=1 debug_level=3" \
@@ -8209,6 +8740,7 @@
           -C "error"
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server supports all profiles. Client supports one profile. openssl server." \
           "$O_SRV -dtls -verify 0 -use_srtp SRTP_AES128_CM_SHA1_80:SRTP_AES128_CM_SHA1_32 -keymatexport 'EXTRACTOR-dtls_srtp' -keymatexportlen 60" \
           "$P_CLI dtls=1 use_srtp=1 srtp_force_profile=2 debug_level=3" \
@@ -8221,6 +8753,7 @@
           -C "error"
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server supports one profile. Client supports all profiles. openssl server." \
           "$O_SRV -dtls -verify 0 -use_srtp SRTP_AES128_CM_SHA1_32 -keymatexport 'EXTRACTOR-dtls_srtp' -keymatexportlen 60" \
           "$P_CLI dtls=1 use_srtp=1 debug_level=3" \
@@ -8233,6 +8766,7 @@
           -C "error"
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server and Client support only one matching profile. openssl server." \
           "$O_SRV -dtls -verify 0 -use_srtp SRTP_AES128_CM_SHA1_32 -keymatexport 'EXTRACTOR-dtls_srtp' -keymatexportlen 60" \
           "$P_CLI dtls=1 use_srtp=1 srtp_force_profile=2 debug_level=3" \
@@ -8245,6 +8779,7 @@
           -C "error"
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server and Client support only one different profile. openssl server." \
           "$O_SRV -dtls -verify 0 -use_srtp SRTP_AES128_CM_SHA1_32 -keymatexport 'EXTRACTOR-dtls_srtp' -keymatexportlen 60" \
           "$P_CLI dtls=1 use_srtp=1 srtp_force_profile=6 debug_level=3" \
@@ -8257,6 +8792,7 @@
           -C "error"
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server doesn't support use_srtp extension. openssl server" \
           "$O_SRV -dtls" \
           "$P_CLI dtls=1 use_srtp=1 debug_level=3" \
@@ -8269,6 +8805,7 @@
           -C "error"
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP all profiles supported. server doesn't support mki. openssl server." \
           "$O_SRV -dtls -verify 0 -use_srtp SRTP_AES128_CM_SHA1_80:SRTP_AES128_CM_SHA1_32 -keymatexport 'EXTRACTOR-dtls_srtp' -keymatexportlen 60" \
           "$P_CLI dtls=1 use_srtp=1 mki=542310ab34290481 debug_level=3" \
@@ -8285,6 +8822,7 @@
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP all profiles supported. gnutls client." \
           "$P_SRV dtls=1 use_srtp=1 debug_level=3" \
           "$G_CLI -u --srtp-profiles=SRTP_AES128_CM_HMAC_SHA1_80:SRTP_AES128_CM_HMAC_SHA1_32:SRTP_NULL_HMAC_SHA1_80:SRTP_NULL_SHA1_32 --insecure 127.0.0.1" \
@@ -8298,6 +8836,7 @@
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server supports all profiles. Client supports all profiles, in different order. gnutls client." \
           "$P_SRV dtls=1 use_srtp=1 debug_level=3" \
           "$G_CLI -u --srtp-profiles=SRTP_NULL_HMAC_SHA1_80:SRTP_AES128_CM_HMAC_SHA1_80:SRTP_NULL_SHA1_32:SRTP_AES128_CM_HMAC_SHA1_32 --insecure 127.0.0.1" \
@@ -8311,6 +8850,7 @@
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server supports all profiles. Client supports one profile. gnutls client." \
           "$P_SRV dtls=1 use_srtp=1 debug_level=3" \
           "$G_CLI -u --srtp-profiles=SRTP_AES128_CM_HMAC_SHA1_32 --insecure 127.0.0.1" \
@@ -8324,6 +8864,7 @@
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server supports one profile. Client supports all profiles. gnutls client." \
           "$P_SRV dtls=1 use_srtp=1 srtp_force_profile=6 debug_level=3" \
           "$G_CLI -u --srtp-profiles=SRTP_AES128_CM_HMAC_SHA1_80:SRTP_AES128_CM_HMAC_SHA1_32:SRTP_NULL_HMAC_SHA1_80:SRTP_NULL_SHA1_32 --insecure 127.0.0.1" \
@@ -8337,6 +8878,7 @@
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server and Client support only one matching profile. gnutls client." \
           "$P_SRV dtls=1 use_srtp=1 srtp_force_profile=2 debug_level=3" \
           "$G_CLI -u --srtp-profiles=SRTP_AES128_CM_HMAC_SHA1_32 --insecure 127.0.0.1" \
@@ -8350,6 +8892,7 @@
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server and Client support only one different profile. gnutls client." \
           "$P_SRV dtls=1 use_srtp=1 srtp_force_profile=1 debug_level=3" \
           "$G_CLI -u --srtp-profiles=SRTP_AES128_CM_HMAC_SHA1_32 --insecure 127.0.0.1" \
@@ -8363,6 +8906,7 @@
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server doesn't support use_srtp extension. gnutls client" \
           "$P_SRV dtls=1 debug_level=3" \
           "$G_CLI -u --srtp-profiles=SRTP_AES128_CM_HMAC_SHA1_80:SRTP_AES128_CM_HMAC_SHA1_32:SRTP_NULL_HMAC_SHA1_80:SRTP_NULL_SHA1_32 --insecure 127.0.0.1" \
@@ -8374,6 +8918,7 @@
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP all profiles supported. gnutls server" \
           "$G_SRV -u --srtp-profiles=SRTP_AES128_CM_HMAC_SHA1_80:SRTP_AES128_CM_HMAC_SHA1_32:SRTP_NULL_HMAC_SHA1_80:SRTP_NULL_SHA1_32" \
           "$P_CLI dtls=1 use_srtp=1 debug_level=3" \
@@ -8387,6 +8932,7 @@
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server supports all profiles. Client supports all profiles, in different order. gnutls server." \
           "$G_SRV -u --srtp-profiles=SRTP_NULL_SHA1_32:SRTP_AES128_CM_HMAC_SHA1_32:SRTP_AES128_CM_HMAC_SHA1_80:SRTP_NULL_HMAC_SHA1_80:SRTP_NULL_SHA1_32" \
           "$P_CLI dtls=1 use_srtp=1 debug_level=3" \
@@ -8400,6 +8946,7 @@
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server supports all profiles. Client supports one profile. gnutls server." \
           "$G_SRV -u --srtp-profiles=SRTP_NULL_SHA1_32:SRTP_AES128_CM_HMAC_SHA1_32:SRTP_AES128_CM_HMAC_SHA1_80:SRTP_NULL_HMAC_SHA1_80:SRTP_NULL_SHA1_32" \
           "$P_CLI dtls=1 use_srtp=1 srtp_force_profile=2 debug_level=3" \
@@ -8413,6 +8960,7 @@
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server supports one profile. Client supports all profiles. gnutls server." \
           "$G_SRV -u --srtp-profiles=SRTP_NULL_HMAC_SHA1_80" \
           "$P_CLI dtls=1 use_srtp=1 debug_level=3" \
@@ -8426,6 +8974,7 @@
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server and Client support only one matching profile. gnutls server." \
           "$G_SRV -u --srtp-profiles=SRTP_AES128_CM_HMAC_SHA1_32" \
           "$P_CLI dtls=1 use_srtp=1 srtp_force_profile=2 debug_level=3" \
@@ -8439,6 +8988,7 @@
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server and Client support only one different profile. gnutls server." \
           "$G_SRV -u --srtp-profiles=SRTP_AES128_CM_HMAC_SHA1_32" \
           "$P_CLI dtls=1 use_srtp=1 srtp_force_profile=6 debug_level=3" \
@@ -8452,6 +9002,7 @@
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP server doesn't support use_srtp extension. gnutls server" \
           "$G_SRV -u" \
           "$P_CLI dtls=1 use_srtp=1 debug_level=3" \
@@ -8465,6 +9016,7 @@
 
 requires_config_enabled MBEDTLS_SSL_DTLS_SRTP
 requires_gnutls
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test  "DTLS-SRTP all profiles supported. mki used. gnutls server." \
           "$G_SRV -u --srtp-profiles=SRTP_AES128_CM_HMAC_SHA1_80:SRTP_AES128_CM_HMAC_SHA1_32:SRTP_NULL_HMAC_SHA1_80:SRTP_NULL_SHA1_32" \
           "$P_CLI dtls=1 use_srtp=1 mki=542310ab34290481 debug_level=3" \
@@ -8482,6 +9034,7 @@
 # Tests for specific things with "unreliable" UDP connection
 
 not_with_valgrind # spurious resend due to timeout
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: reference" \
             -p "$P_PXY" \
             "$P_SRV dtls=1 debug_level=2 hs_timeout=10000-20000" \
@@ -8500,6 +9053,7 @@
             -c "HTTP/1.0 200 OK"
 
 not_with_valgrind # spurious resend due to timeout
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: duplicate every packet" \
             -p "$P_PXY duplicate=1" \
             "$P_SRV dtls=1 dgram_packing=0 debug_level=2 hs_timeout=10000-20000" \
@@ -8513,6 +9067,7 @@
             -s "Extra-header:" \
             -c "HTTP/1.0 200 OK"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: duplicate every packet, server anti-replay off" \
             -p "$P_PXY duplicate=1" \
             "$P_SRV dtls=1 dgram_packing=0 debug_level=2 anti_replay=0" \
@@ -8527,6 +9082,7 @@
             -s "Extra-header:" \
             -c "HTTP/1.0 200 OK"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: multiple records in same datagram" \
             -p "$P_PXY pack=50" \
             "$P_SRV dtls=1 dgram_packing=0 debug_level=2" \
@@ -8535,6 +9091,7 @@
             -c "next record in same datagram" \
             -s "next record in same datagram"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: multiple records in same datagram, duplicate every packet" \
             -p "$P_PXY pack=50 duplicate=1" \
             "$P_SRV dtls=1 dgram_packing=0 debug_level=2" \
@@ -8543,6 +9100,7 @@
             -c "next record in same datagram" \
             -s "next record in same datagram"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: inject invalid AD record, default badmac_limit" \
             -p "$P_PXY bad_ad=1" \
             "$P_SRV dtls=1 dgram_packing=0 debug_level=1" \
@@ -8555,6 +9113,7 @@
             -S "too many records with bad MAC" \
             -S "Verification of the message MAC failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: inject invalid AD record, badmac_limit 1" \
             -p "$P_PXY bad_ad=1" \
             "$P_SRV dtls=1 dgram_packing=0 debug_level=1 badmac_limit=1" \
@@ -8567,6 +9126,7 @@
             -s "too many records with bad MAC" \
             -s "Verification of the message MAC failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: inject invalid AD record, badmac_limit 2" \
             -p "$P_PXY bad_ad=1" \
             "$P_SRV dtls=1 dgram_packing=0 debug_level=1 badmac_limit=2" \
@@ -8579,6 +9139,7 @@
             -S "too many records with bad MAC" \
             -S "Verification of the message MAC failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: inject invalid AD record, badmac_limit 2, exchanges 2"\
             -p "$P_PXY bad_ad=1" \
             "$P_SRV dtls=1 dgram_packing=0 debug_level=1 badmac_limit=2 exchanges=2" \
@@ -8591,6 +9152,7 @@
             -s "too many records with bad MAC" \
             -s "Verification of the message MAC failed"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: delay ChangeCipherSpec" \
             -p "$P_PXY delay_ccs=1" \
             "$P_SRV dtls=1 debug_level=1 dgram_packing=0" \
@@ -8603,6 +9165,7 @@
 
 # Tests for reordering support with DTLS
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS reordering: Buffer out-of-order handshake message on client" \
             -p "$P_PXY delay_srv=ServerHello" \
             "$P_SRV dgram_packing=0 cookies=0 dtls=1 debug_level=2 \
@@ -8619,6 +9182,7 @@
             -S "Injecting buffered CCS message" \
             -S "Remember CCS message"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS reordering: Buffer out-of-order handshake message fragment on client" \
             -p "$P_PXY delay_srv=ServerHello" \
             "$P_SRV mtu=512 dgram_packing=0 cookies=0 dtls=1 debug_level=2 \
@@ -8642,6 +9206,7 @@
 # in size, so that the bound below ensures that the certificate can be reassembled
 # while keeping the ServerKeyExchange.
 requires_config_value_at_least "MBEDTLS_SSL_DTLS_MAX_BUFFERING" 1300
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS reordering: Buffer out-of-order hs msg before reassembling next" \
             -p "$P_PXY delay_srv=Certificate delay_srv=Certificate" \
             "$P_SRV mtu=512 dgram_packing=0 cookies=0 dtls=1 debug_level=2 \
@@ -8664,6 +9229,7 @@
 # when dropping it first.
 requires_config_value_at_least "MBEDTLS_SSL_DTLS_MAX_BUFFERING" 900
 requires_config_value_at_most "MBEDTLS_SSL_DTLS_MAX_BUFFERING" 1299
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS reordering: Buffer out-of-order hs msg before reassembling next, free buffered msg" \
             -p "$P_PXY delay_srv=Certificate delay_srv=Certificate" \
             "$P_SRV mtu=512 dgram_packing=0 cookies=0 dtls=1 debug_level=2 \
@@ -8681,6 +9247,7 @@
             -S "Injecting buffered CCS message" \
             -S "Remember CCS message"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS reordering: Buffer out-of-order handshake message on server" \
             -p "$P_PXY delay_cli=Certificate" \
             "$P_SRV dgram_packing=0 auth_mode=required cookies=0 dtls=1 debug_level=2 \
@@ -8697,6 +9264,7 @@
             -S "Injecting buffered CCS message" \
             -S "Remember CCS message"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS reordering: Buffer out-of-order CCS message on client"\
             -p "$P_PXY delay_srv=NewSessionTicket" \
             "$P_SRV dgram_packing=0 cookies=0 dtls=1 debug_level=2 \
@@ -8713,6 +9281,7 @@
             -S "Injecting buffered CCS message" \
             -S "Remember CCS message"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS reordering: Buffer out-of-order CCS message on server"\
             -p "$P_PXY delay_cli=ClientKeyExchange" \
             "$P_SRV dgram_packing=0 cookies=0 dtls=1 debug_level=2 \
@@ -8729,6 +9298,7 @@
             -s "Injecting buffered CCS message" \
             -s "Remember CCS message"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS reordering: Buffer encrypted Finished message" \
             -p "$P_PXY delay_ccs=1" \
             "$P_SRV dgram_packing=0 cookies=0 dtls=1 debug_level=2 \
@@ -8758,6 +9328,7 @@
 #   handshake, omitting CRTs.
 requires_config_value_at_least "MBEDTLS_SSL_DTLS_MAX_BUFFERING" 190
 requires_config_value_at_most "MBEDTLS_SSL_DTLS_MAX_BUFFERING" 230
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS reordering: Buffer encrypted Finished message, drop for fragmented NewSessionTicket" \
             -p "$P_PXY delay_srv=NewSessionTicket delay_srv=NewSessionTicket delay_ccs=1" \
             "$P_SRV mtu=140 response_size=90 dgram_packing=0 psk=abc123 psk_identity=foo cookies=0 dtls=1 debug_level=2" \
@@ -8772,6 +9343,7 @@
 # Tests for "randomly unreliable connection": try a variety of flows and peers
 
 client_needs_more_time 2
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: 3d (drop, delay, duplicate), \"short\" PSK handshake" \
             -p "$P_PXY drop=5 delay=5 duplicate=5" \
             "$P_SRV dtls=1 dgram_packing=0 hs_timeout=500-10000 tickets=0 auth_mode=none \
@@ -8783,6 +9355,7 @@
             -c "HTTP/1.0 200 OK"
 
 client_needs_more_time 2
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: 3d, \"short\" RSA handshake" \
             -p "$P_PXY drop=5 delay=5 duplicate=5" \
             "$P_SRV dtls=1 dgram_packing=0 hs_timeout=500-10000 tickets=0 auth_mode=none" \
@@ -8793,6 +9366,7 @@
             -c "HTTP/1.0 200 OK"
 
 client_needs_more_time 2
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: 3d, \"short\" (no ticket, no cli_auth) FS handshake" \
             -p "$P_PXY drop=5 delay=5 duplicate=5" \
             "$P_SRV dtls=1 dgram_packing=0 hs_timeout=500-10000 tickets=0 auth_mode=none" \
@@ -8802,6 +9376,7 @@
             -c "HTTP/1.0 200 OK"
 
 client_needs_more_time 2
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: 3d, FS, client auth" \
             -p "$P_PXY drop=5 delay=5 duplicate=5" \
             "$P_SRV dtls=1 dgram_packing=0 hs_timeout=500-10000 tickets=0 auth_mode=required" \
@@ -8811,6 +9386,7 @@
             -c "HTTP/1.0 200 OK"
 
 client_needs_more_time 2
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: 3d, FS, ticket" \
             -p "$P_PXY drop=5 delay=5 duplicate=5" \
             "$P_SRV dtls=1 dgram_packing=0 hs_timeout=500-10000 tickets=1 auth_mode=none" \
@@ -8820,6 +9396,7 @@
             -c "HTTP/1.0 200 OK"
 
 client_needs_more_time 2
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: 3d, max handshake (FS, ticket + client auth)" \
             -p "$P_PXY drop=5 delay=5 duplicate=5" \
             "$P_SRV dtls=1 dgram_packing=0 hs_timeout=500-10000 tickets=1 auth_mode=required" \
@@ -8829,6 +9406,7 @@
             -c "HTTP/1.0 200 OK"
 
 client_needs_more_time 2
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: 3d, max handshake, nbio" \
             -p "$P_PXY drop=5 delay=5 duplicate=5" \
             "$P_SRV dtls=1 dgram_packing=0 hs_timeout=500-10000 nbio=2 tickets=1 \
@@ -8839,6 +9417,7 @@
             -c "HTTP/1.0 200 OK"
 
 client_needs_more_time 4
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: 3d, min handshake, resumption" \
             -p "$P_PXY drop=5 delay=5 duplicate=5" \
             "$P_SRV dtls=1 dgram_packing=0 hs_timeout=500-10000 tickets=0 auth_mode=none \
@@ -8853,6 +9432,7 @@
             -c "HTTP/1.0 200 OK"
 
 client_needs_more_time 4
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: 3d, min handshake, resumption, nbio" \
             -p "$P_PXY drop=5 delay=5 duplicate=5" \
             "$P_SRV dtls=1 dgram_packing=0 hs_timeout=500-10000 tickets=0 auth_mode=none \
@@ -8868,6 +9448,7 @@
 
 client_needs_more_time 4
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: 3d, min handshake, client-initiated renego" \
             -p "$P_PXY drop=5 delay=5 duplicate=5" \
             "$P_SRV dtls=1 dgram_packing=0 hs_timeout=500-10000 tickets=0 auth_mode=none \
@@ -8883,6 +9464,7 @@
 
 client_needs_more_time 4
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: 3d, min handshake, client-initiated renego, nbio" \
             -p "$P_PXY drop=5 delay=5 duplicate=5" \
             "$P_SRV dtls=1 dgram_packing=0 hs_timeout=500-10000 tickets=0 auth_mode=none \
@@ -8898,6 +9480,7 @@
 
 client_needs_more_time 4
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: 3d, min handshake, server-initiated renego" \
             -p "$P_PXY drop=5 delay=5 duplicate=5" \
             "$P_SRV dtls=1 dgram_packing=0 hs_timeout=500-10000 tickets=0 auth_mode=none \
@@ -8914,6 +9497,7 @@
 
 client_needs_more_time 4
 requires_config_enabled MBEDTLS_SSL_RENEGOTIATION
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: 3d, min handshake, server-initiated renego, nbio" \
             -p "$P_PXY drop=5 delay=5 duplicate=5" \
             "$P_SRV dtls=1 dgram_packing=0 hs_timeout=500-10000 tickets=0 auth_mode=none \
@@ -8936,6 +9520,7 @@
 skip_next_test
 client_needs_more_time 6
 not_with_valgrind # risk of non-mbedtls peer timing out
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: 3d, openssl server" \
             -p "$P_PXY drop=5 delay=5 duplicate=5 protect_hvr=1" \
             "$O_SRV -dtls1 -mtu 2048" \
@@ -8946,6 +9531,7 @@
 skip_next_test # see above
 client_needs_more_time 8
 not_with_valgrind # risk of non-mbedtls peer timing out
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: 3d, openssl server, fragmentation" \
             -p "$P_PXY drop=5 delay=5 duplicate=5 protect_hvr=1" \
             "$O_SRV -dtls1 -mtu 768" \
@@ -8956,6 +9542,7 @@
 skip_next_test # see above
 client_needs_more_time 8
 not_with_valgrind # risk of non-mbedtls peer timing out
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: 3d, openssl server, fragmentation, nbio" \
             -p "$P_PXY drop=5 delay=5 duplicate=5 protect_hvr=1" \
             "$O_SRV -dtls1 -mtu 768" \
@@ -8966,6 +9553,7 @@
 requires_gnutls
 client_needs_more_time 6
 not_with_valgrind # risk of non-mbedtls peer timing out
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: 3d, gnutls server" \
             -p "$P_PXY drop=5 delay=5 duplicate=5" \
             "$G_SRV -u --mtu 2048 -a" \
@@ -8977,6 +9565,7 @@
 requires_gnutls_next
 client_needs_more_time 8
 not_with_valgrind # risk of non-mbedtls peer timing out
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: 3d, gnutls server, fragmentation" \
             -p "$P_PXY drop=5 delay=5 duplicate=5" \
             "$G_NEXT_SRV -u --mtu 512" \
@@ -8988,6 +9577,7 @@
 requires_gnutls_next
 client_needs_more_time 8
 not_with_valgrind # risk of non-mbedtls peer timing out
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "DTLS proxy: 3d, gnutls server, fragmentation, nbio" \
             -p "$P_PXY drop=5 delay=5 duplicate=5" \
             "$G_NEXT_SRV -u --mtu 512" \
@@ -8996,6 +9586,7 @@
             -s "Extra-header:" \
             -c "Extra-header:"
 
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 run_test    "export keys functionality" \
             "$P_SRV eap_tls=1 debug_level=3" \
             "$P_CLI eap_tls=1 debug_level=3" \
@@ -9336,6 +9927,7 @@
             -c "ChangeCipherSpec invalid in TLS 1.3 without compatibility mode"
 
 # Test heap memory usage after handshake
+requires_config_enabled MBEDTLS_SSL_PROTO_TLS1_2
 requires_config_enabled MBEDTLS_MEMORY_DEBUG
 requires_config_enabled MBEDTLS_MEMORY_BUFFER_ALLOC_C
 requires_config_enabled MBEDTLS_SSL_MAX_FRAGMENT_LENGTH