diff --git a/.github/pull_request_template.md b/.github/pull_request_template.md
index 485b541..c580443 100644
--- a/.github/pull_request_template.md
+++ b/.github/pull_request_template.md
@@ -1,8 +1,5 @@
 Notes:
-* Pull requests cannot be accepted until:
--  The submitter has [accepted the online agreement here with a click through](https://developer.mbed.org/contributor_agreement/) 
-   or for companies or those that do not wish to create an mbed account, a slightly different agreement can be found [here](https://www.mbed.com/en/about-mbed/contributor-license-agreements/)
-- The PR follows the [mbed TLS coding standards](https://tls.mbed.org/kb/development/mbedtls-coding-standards)
+* Pull requests cannot be accepted until the PR follows the [contributing guidelines](../CONTRIBUTING.md). In particular, each commit must have at least one `Signed-off-by:` line from the committer to certify that the contribution is made under the terms of the [Developer Certificate of Origin](../dco.txt).
 * This is just a template, so feel free to use/remove the unnecessary things
 ## Description
 A few sentences describing the overall goals of the pull request's commits.
diff --git a/CONTRIBUTING.md b/CONTRIBUTING.md
index 18851db..c1ae452 100644
--- a/CONTRIBUTING.md
+++ b/CONTRIBUTING.md
@@ -5,11 +5,6 @@
  - As with any open source project, contributions will be reviewed by the project team and community and may need some modifications to be accepted.
  - The contribution should not break API or ABI, unless there is a real justification for that. If there is an API change, the contribution, if accepted, will be merged only when there will be a major release.
 
-Contributor License Agreement (CLA)
------------------------------------
-- All contributions, whether large or small, require a Contributor's License Agreement (CLA) to be accepted. This is because source code can possibly fall under copyright law and we need your consent to share in the ownership of the copyright.
-- To accept the Contributor’s License Agreement (CLA), individual contributors can do this by creating an Mbed account and [accepting the online agreement here with a click through](https://developer.mbed.org/contributor_agreement/). Alternatively, for contributions from corporations, or those that do not wish to create an Mbed account, a slightly different agreement can be found [here](https://www.mbed.com/en/about-mbed/contributor-license-agreements/). This agreement should be signed and returned to Arm as described in the instructions given.
-
 Coding Standards
 ----------------
 - We would ask that contributions conform to [our coding standards](https://tls.mbed.org/kb/development/mbedtls-coding-standards), and that contributions are fully tested before submission, as mentioned in the [Tests](#tests) and [Continuous Integration](#continuous-integration-tests) sections.
@@ -24,7 +19,8 @@
 1. Write a test which shows that the bug was fixed or that the feature works as expected.
 1. Send a pull request (PR) and work with us until it gets merged and published. Contributions may need some modifications, so a few rounds of review and fixing may be necessary. We will include your name in the ChangeLog :)
 1. For quick merging, the contribution should be short, and concentrated on a single feature or topic. The larger the contribution is, the longer it would take to review it and merge it.
-1. Mbed TLS is released under the Apache license, and as such, all the added files should include the Apache license header.
+1. All new files should include the [Apache-2.0](https://spdx.org/licenses/Apache-2.0.html) standard license header where possible.
+1. Ensure that each commit has at least one `Signed-off-by:` line from the committer. If anyone else contributes to the commit, they should also add their own `Signed-off-by:` line. By adding this line, contributor(s) certify that the contribution is made under the terms of the [Developer Certificate of Origin](dco.txt). The contribution licensing is described in the [License section of the README](README.md#License).
 
 API/ABI Compatibility
 ---------------------
@@ -46,18 +42,14 @@
 
 When backporting to these branches please observe the following rules:
 
- 1. Any change to the library which changes the API or ABI cannot be backported.
-
- 2. All bug fixes that correct a defect that is also present in an LTS branch must be backported to that LTS branch. If a bug fix introduces a change to the API such as a new function, the fix should be reworked to avoid the API change. API changes without very strong justification are unlikely to be accepted.
-
- 3. If a contribution is a new feature or enhancement, no backporting is required. Exceptions to this may be additional test cases or quality improvements such as changes to build or test scripts.
+1. Any change to the library which changes the API or ABI cannot be backported.
+1. All bug fixes that correct a defect that is also present in an LTS branch must be backported to that LTS branch. If a bug fix introduces a change to the API such as a new function, the fix should be reworked to avoid the API change. API changes without very strong justification are unlikely to be accepted.
+1. If a contribution is a new feature or enhancement, no backporting is required. Exceptions to this may be additional test cases or quality improvements such as changes to build or test scripts.
 
 It would be highly appreciated if contributions are backported to LTS branches in addition to the [development branch](https://github.com/ARMmbed/mbedtls/tree/development) by contributors.
 
 Currently maintained LTS branches are:
-
 1. [mbedtls-2.7](https://github.com/ARMmbed/mbedtls/tree/mbedtls-2.7)
-
 1. [mbedtls-2.16](https://github.com/ARMmbed/mbedtls/tree/mbedtls-2.16)
 
 
@@ -84,12 +76,7 @@
 Mbed TLS is well documented, but if you think documentation is needed, speak out!
 
 1. All interfaces should be documented through Doxygen. New APIs should introduce Doxygen documentation.
-
-2. Complex parts in the code should include comments.
-
-3. If needed, a Readme file is advised.
-
-4. If a [Knowledge Base (KB)](https://tls.mbed.org/kb) article should be added, write this as a comment in the PR description.
-
-5. A [ChangeLog](https://github.com/ARMmbed/mbedtls/blob/development/ChangeLog) entry should be added for this contribution.
-
+1. Complex parts in the code should include comments.
+1. If needed, a Readme file is advised.
+1. If a [Knowledge Base (KB)](https://tls.mbed.org/kb) article should be added, write this as a comment in the PR description.
+1. A [ChangeLog](https://github.com/ARMmbed/mbedtls/blob/development/ChangeLog) entry should be added for this contribution.
diff --git a/README.md b/README.md
index 62dd4e2..a44b635 100644
--- a/README.md
+++ b/README.md
@@ -1,6 +1,8 @@
 README for Mbed TLS
 ===================
 
+Mbed TLS is a C library that implements cryptographic primitives, X.509 certificate manipulation and the SSL/TLS and DTLS protocols. Its small code footprint makes it suitable for embedded systems.
+
 Configuration
 -------------
 
@@ -167,21 +169,12 @@
 -   [What external dependencies does Mbed TLS rely on?](https://tls.mbed.org/kb/development/what-external-dependencies-does-mbedtls-rely-on)
 -   [How do I configure Mbed TLS](https://tls.mbed.org/kb/compiling-and-building/how-do-i-configure-mbedtls)
 
+License
+-------
+
+Unless specifically indicated otherwise in a file, Mbed TLS files are provided under the [Apache-2.0](https://spdx.org/licenses/Apache-2.0.html) license. See [here](./apache-2.0.txt) for the full text of this license. Contributors must accept that their contributions are made under both the Apache-2.0 AND [GPL-2.0-or-later](https://spdx.org/licenses/GPL-2.0-or-later.html) licenses. This enables LTS (Long Term Support) branches of the software to be provided under either the Apache-2.0 OR GPL-2.0-or-later licenses.
+
 Contributing
 ------------
 
-We gratefully accept bug reports and contributions from the community. There are some requirements we need to fulfill in order to be able to integrate contributions:
-
--   All contributions, whether large or small require a Contributor's License Agreement (CLA) to be accepted. This is because source code can possibly fall under copyright law and we need your consent to share in the ownership of the copyright.
--   We would ask that contributions conform to [our coding standards](https://tls.mbed.org/kb/development/mbedtls-coding-standards), and that contributions should be fully tested before submission.
--   As with any open source project, contributions will be reviewed by the project team and community and may need some modifications to be accepted.
-
-To accept the Contributor’s Licence Agreement (CLA), individual contributors can do this by creating an Mbed account and [accepting the online agreement here with a click through](https://os.mbed.com/contributor_agreement/). Alternatively, for contributions from corporations, or those that do not wish to create an Mbed account, a slightly different agreement can be found [here](https://www.mbed.com/en/about-mbed/contributor-license-agreements/). This agreement should be signed and returned to Arm as described in the instructions given.
-
-### Making a Contribution
-
-1.  [Check for open issues](https://github.com/ARMmbed/mbedtls/issues) or [start a discussion](https://forums.mbed.com/c/mbed-tls) around a feature idea or a bug.
-2.  Fork the [Mbed TLS repository on GitHub](https://github.com/ARMmbed/mbedtls) to start making your changes. As a general rule, you should use the "development" branch as a basis.
-3.  Write a test which shows that the bug was fixed or that the feature works as expected.
-4.  Send a pull request and bug us until it gets merged and published. Contributions may need some modifications, so work with us to get your change accepted. We will include your name in the ChangeLog :)
-
+We gratefully accept bug reports and contributions from the community. Please see the [contributing guidelines](CONTRIBUTING.md) for details on how to do this.
diff --git a/dco.txt b/dco.txt
new file mode 100644
index 0000000..8201f99
--- /dev/null
+++ b/dco.txt
@@ -0,0 +1,37 @@
+Developer Certificate of Origin
+Version 1.1
+
+Copyright (C) 2004, 2006 The Linux Foundation and its contributors.
+1 Letterman Drive
+Suite D4700
+San Francisco, CA, 94129
+
+Everyone is permitted to copy and distribute verbatim copies of this
+license document, but changing it is not allowed.
+
+
+Developer's Certificate of Origin 1.1
+
+By making a contribution to this project, I certify that:
+
+(a) The contribution was created in whole or in part by me and I
+    have the right to submit it under the open source license
+    indicated in the file; or
+
+(b) The contribution is based upon previous work that, to the best
+    of my knowledge, is covered under an appropriate open source
+    license and I have the right under that license to submit that
+    work with modifications, whether created in whole or in part
+    by me, under the same open source license (unless I am
+    permitted to submit under a different license), as indicated
+    in the file; or
+
+(c) The contribution was provided directly to me by some other
+    person who certified (a), (b) or (c) and I have not modified
+    it.
+
+(d) I understand and agree that this project and the contribution
+    are public and that a record of the contribution (including all
+    personal information I submit with it, including my sign-off) is
+    maintained indefinitely and may be redistributed consistent with
+    this project or the open source license(s) involved.
diff --git a/programs/ssl/ssl_client2.c b/programs/ssl/ssl_client2.c
index f95ca0c..13d0d17 100644
--- a/programs/ssl/ssl_client2.c
+++ b/programs/ssl/ssl_client2.c
@@ -115,6 +115,7 @@
 #define DFL_FALLBACK            -1
 #define DFL_EXTENDED_MS         -1
 #define DFL_ETM                 -1
+#define DFL_SKIP_CLOSE_NOTIFY   0
 
 #define GET_REQUEST "GET %s HTTP/1.0\r\nExtra-header: "
 #define GET_REQUEST_END "\r\n\r\n"
@@ -278,6 +279,7 @@
     "                        options: 1 (level-triggered, implies nbio=1),\n" \
     "    read_timeout=%%d     default: 0 ms (no timeout)\n"        \
     "    max_resend=%%d       default: 0 (no resend on timeout)\n" \
+    "    skip_close_notify=%%d default: 0 (send close_notify)\n" \
     "\n"                                                    \
     USAGE_DTLS                                              \
     "\n"                                                    \
@@ -376,6 +378,7 @@
     int dgram_packing;          /* allow/forbid datagram packing            */
     int extended_ms;            /* negotiate extended master secret?        */
     int etm;                    /* negotiate encrypt then mac?              */
+    int skip_close_notify;      /* skip sending the close_notify alert      */
 } opt;
 
 int query_config( const char *config );
@@ -653,6 +656,7 @@
     opt.extended_ms         = DFL_EXTENDED_MS;
     opt.etm                 = DFL_ETM;
     opt.dgram_packing       = DFL_DGRAM_PACKING;
+    opt.skip_close_notify   = DFL_SKIP_CLOSE_NOTIFY;
 
     for( i = 1; i < argc; i++ )
     {
@@ -993,6 +997,12 @@
         {
             return query_config( q );
         }
+        else if( strcmp( p, "skip_close_notify" ) == 0 )
+        {
+            opt.skip_close_notify = atoi( q );
+            if( opt.skip_close_notify < 0 || opt.skip_close_notify > 1 )
+                goto usage;
+        }
         else
             goto usage;
     }
@@ -2032,10 +2042,25 @@
     mbedtls_printf( "  . Closing the connection..." );
     fflush( stdout );
 
-    /* No error checking, the connection might be closed already */
-    do ret = mbedtls_ssl_close_notify( &ssl );
-    while( ret == MBEDTLS_ERR_SSL_WANT_WRITE );
-    ret = 0;
+    /*
+     * Most of the time sending a close_notify before closing is the right
+     * thing to do. However, when the server already knows how many messages
+     * are expected and closes the connection by itself, this alert becomes
+     * redundant. Sometimes with DTLS this redundancy becomes a problem by
+     * leading to a race condition where the server might close the connection
+     * before seeing the alert, and since UDP is connection-less when the
+     * alert arrives it will be seen as a new connection, which will fail as
+     * the alert is clearly not a valid ClientHello. This may cause spurious
+     * failures in tests that use DTLS and resumption with ssl_server2 in
+     * ssl-opt.sh, avoided by enabling skip_close_notify client-side.
+     */
+    if( opt.skip_close_notify == 0 )
+    {
+        /* No error checking, the connection might be closed already */
+        do ret = mbedtls_ssl_close_notify( &ssl );
+        while( ret == MBEDTLS_ERR_SSL_WANT_WRITE );
+        ret = 0;
+    }
 
     mbedtls_printf( " done\n" );
 
diff --git a/scripts/output_env.sh b/scripts/output_env.sh
index c809d46..0e06794 100755
--- a/scripts/output_env.sh
+++ b/scripts/output_env.sh
@@ -23,11 +23,15 @@
     shift
     ARGS="$1"
     shift
-    FAIL_MSG="$1"
+    VARIANT="$1"
     shift
 
-    if ! `type "$BIN" > /dev/null 2>&1`; then
-        echo "* $FAIL_MSG"
+    if [ -n "$VARIANT" ]; then
+        VARIANT=" ($VARIANT)"
+    fi
+
+    if ! type "$BIN" > /dev/null 2>&1; then
+        echo " * ${BIN##*/}$VARIANT: Not found."
         return 0
     fi
 
@@ -41,81 +45,118 @@
         VERSION_STR=`echo "$VERSION_STR" | $FILTER`
     done
 
-    echo "* ${BIN##*/}: $BIN: $VERSION_STR"
+    if [ -z "$VERSION_STR" ]; then
+        VERSION_STR="Version could not be determined."
+    fi
+
+    echo " * ${BIN##*/}$VARIANT: ${BIN} : ${VERSION_STR} "
 }
 
+echo "** Platform:"
+echo
+
+if [ `uname -s` = "Linux" ]; then
+    echo "Linux variant"
+    lsb_release -d -c
+else
+    echo "Unknown Unix variant"
+fi
+
+echo
+
 print_version "uname" "-a" ""
+
+echo
+echo
+echo "** Tool Versions:"
 echo
 
 if [ "${RUN_ARMCC:-1}" -ne 0 ]; then
     : "${ARMC5_CC:=armcc}"
-    print_version "$ARMC5_CC" "--vsn" "armcc not found!" "head -n 2"
+    print_version "$ARMC5_CC" "--vsn" "" "head -n 2"
     echo
 
     : "${ARMC6_CC:=armclang}"
-    print_version "$ARMC6_CC" "--vsn" "armclang not found!" "head -n 2"
+    print_version "$ARMC6_CC" "--vsn" "" "head -n 2"
     echo
 fi
 
-print_version "arm-none-eabi-gcc" "--version" "gcc-arm not found!" "head -n 1"
+print_version "arm-none-eabi-gcc" "--version" "" "head -n 1"
 echo
 
-print_version "gcc" "--version" "gcc not found!" "head -n 1"
+print_version "gcc" "--version" "" "head -n 1"
 echo
 
-print_version "clang" "--version" "clang not found" "head -n 2"
+print_version "clang" "--version" "" "head -n 2"
 echo
 
-print_version "ldd" "--version"                     \
-    "No ldd present: can't determine libc version!" \
-    "head -n 1"
+print_version "ldd" "--version" "" "head -n 1"
 echo
 
-print_version "valgrind" "--version" "valgrind not found!"
+print_version "valgrind" "--version" ""
+echo
+
+print_version "gdb" "--version" "" "head -n 1"
+echo
+
+print_version "perl" "--version" "" "head -n 2" "grep ."
+echo
+
+print_version "python" "--version" "" "head -n 1"
+echo
+
+print_version "pylint3" "--version" "" "sed /^.*config/d" "grep pylint"
 echo
 
 : ${OPENSSL:=openssl}
-print_version "$OPENSSL" "version" "openssl not found!"
+print_version "$OPENSSL" "version" "default"
 echo
 
 if [ -n "${OPENSSL_LEGACY+set}" ]; then
-    print_version "$OPENSSL_LEGACY" "version" "openssl legacy version not found!"
-    echo
+    print_version "$OPENSSL_LEGACY" "version" "legacy"
+else
+    echo " * openssl (legacy): Not configured."
 fi
+echo
 
 if [ -n "${OPENSSL_NEXT+set}" ]; then
-    print_version "$OPENSSL_NEXT" "version" "openssl next version not found!"
-    echo
+    print_version "$OPENSSL_NEXT" "version" "next"
+else
+    echo " * openssl (next): Not configured."
 fi
+echo
 
 : ${GNUTLS_CLI:=gnutls-cli}
-print_version "$GNUTLS_CLI" "--version" "gnuTLS client not found!" "head -n 1"
+print_version "$GNUTLS_CLI" "--version" "default" "head -n 1"
 echo
 
 : ${GNUTLS_SERV:=gnutls-serv}
-print_version "$GNUTLS_SERV" "--version" "gnuTLS server not found!" "head -n 1"
+print_version "$GNUTLS_SERV" "--version" "default" "head -n 1"
 echo
 
 if [ -n "${GNUTLS_LEGACY_CLI+set}" ]; then
-    print_version "$GNUTLS_LEGACY_CLI" "--version" \
-        "gnuTLS client legacy version not found!"  \
-        "head -n 1"
-    echo
+    print_version "$GNUTLS_LEGACY_CLI" "--version" "legacy" "head -n 1"
+else
+     echo " * gnutls-cli (legacy): Not configured."
 fi
+echo
 
 if [ -n "${GNUTLS_LEGACY_SERV+set}" ]; then
-    print_version "$GNUTLS_LEGACY_SERV" "--version" \
-        "gnuTLS server legacy version not found!"   \
-        "head -n 1"
-    echo
-fi
-
-if `hash dpkg > /dev/null 2>&1`; then
-    echo "* asan:"
-    dpkg -s libasan2 2> /dev/null | grep -i version
-    dpkg -s libasan1 2> /dev/null | grep -i version
-    dpkg -s libasan0 2> /dev/null | grep -i version
+    print_version "$GNUTLS_LEGACY_SERV" "--version" "legacy" "head -n 1"
 else
-    echo "* No dpkg present: can't determine asan version!"
+    echo " * gnutls-serv (legacy): Not configured."
+fi
+echo
+
+echo " * Installed asan versions:"
+if type dpkg-query >/dev/null 2>/dev/null; then
+    if ! dpkg-query -f '${Status} ${Package}: ${Version}\n' -W 'libasan*' |
+         awk '$3 == "installed" && $4 !~ /-/ {print $4, $5}' |
+         grep .
+    then
+        echo "   No asan versions installed."
+    fi
+else
+    echo "  Unable to determine the asan version without dpkg."
 fi
 echo
diff --git a/tests/ssl-opt.sh b/tests/ssl-opt.sh
index 3a5cad2..863e5e8 100755
--- a/tests/ssl-opt.sh
+++ b/tests/ssl-opt.sh
@@ -1575,7 +1575,7 @@
 
 run_test    "Session resume using tickets, DTLS: basic" \
             "$P_SRV debug_level=3 dtls=1 tickets=1" \
-            "$P_CLI debug_level=3 dtls=1 tickets=1 reconnect=1" \
+            "$P_CLI debug_level=3 dtls=1 tickets=1 reconnect=1 skip_close_notify=1" \
             0 \
             -c "client hello, adding session ticket extension" \
             -s "found session ticket extension" \
@@ -1589,7 +1589,7 @@
 
 run_test    "Session resume using tickets, DTLS: cache disabled" \
             "$P_SRV debug_level=3 dtls=1 tickets=1 cache_max=0" \
-            "$P_CLI debug_level=3 dtls=1 tickets=1 reconnect=1" \
+            "$P_CLI debug_level=3 dtls=1 tickets=1 reconnect=1 skip_close_notify=1" \
             0 \
             -c "client hello, adding session ticket extension" \
             -s "found session ticket extension" \
@@ -1603,7 +1603,7 @@
 
 run_test    "Session resume using tickets, DTLS: timeout" \
             "$P_SRV debug_level=3 dtls=1 tickets=1 cache_max=0 ticket_timeout=1" \
-            "$P_CLI debug_level=3 dtls=1 tickets=1 reconnect=1 reco_delay=2" \
+            "$P_CLI debug_level=3 dtls=1 tickets=1 reconnect=1 skip_close_notify=1 reco_delay=2" \
             0 \
             -c "client hello, adding session ticket extension" \
             -s "found session ticket extension" \
@@ -1735,7 +1735,7 @@
 
 run_test    "Session resume using cache, DTLS: tickets enabled on client" \
             "$P_SRV dtls=1 debug_level=3 tickets=0" \
-            "$P_CLI dtls=1 debug_level=3 tickets=1 reconnect=1" \
+            "$P_CLI dtls=1 debug_level=3 tickets=1 reconnect=1 skip_close_notify=1" \
             0 \
             -c "client hello, adding session ticket extension" \
             -s "found session ticket extension" \
@@ -1749,7 +1749,7 @@
 
 run_test    "Session resume using cache, DTLS: tickets enabled on server" \
             "$P_SRV dtls=1 debug_level=3 tickets=1" \
-            "$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1" \
+            "$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1 skip_close_notify=1" \
             0 \
             -C "client hello, adding session ticket extension" \
             -S "found session ticket extension" \
@@ -1763,7 +1763,7 @@
 
 run_test    "Session resume using cache, DTLS: cache_max=0" \
             "$P_SRV dtls=1 debug_level=3 tickets=0 cache_max=0" \
-            "$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1" \
+            "$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1 skip_close_notify=1" \
             0 \
             -S "session successfully restored from cache" \
             -S "session successfully restored from ticket" \
@@ -1772,7 +1772,7 @@
 
 run_test    "Session resume using cache, DTLS: cache_max=1" \
             "$P_SRV dtls=1 debug_level=3 tickets=0 cache_max=1" \
-            "$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1" \
+            "$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1 skip_close_notify=1" \
             0 \
             -s "session successfully restored from cache" \
             -S "session successfully restored from ticket" \
@@ -1781,7 +1781,7 @@
 
 run_test    "Session resume using cache, DTLS: timeout > delay" \
             "$P_SRV dtls=1 debug_level=3 tickets=0" \
-            "$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1 reco_delay=0" \
+            "$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1 skip_close_notify=1 reco_delay=0" \
             0 \
             -s "session successfully restored from cache" \
             -S "session successfully restored from ticket" \
@@ -1790,7 +1790,7 @@
 
 run_test    "Session resume using cache, DTLS: timeout < delay" \
             "$P_SRV dtls=1 debug_level=3 tickets=0 cache_timeout=1" \
-            "$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1 reco_delay=2" \
+            "$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1 skip_close_notify=1 reco_delay=2" \
             0 \
             -S "session successfully restored from cache" \
             -S "session successfully restored from ticket" \
@@ -1799,7 +1799,7 @@
 
 run_test    "Session resume using cache, DTLS: no timeout" \
             "$P_SRV dtls=1 debug_level=3 tickets=0 cache_timeout=0" \
-            "$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1 reco_delay=2" \
+            "$P_CLI dtls=1 debug_level=3 tickets=0 reconnect=1 skip_close_notify=1 reco_delay=2" \
             0 \
             -s "session successfully restored from cache" \
             -S "session successfully restored from ticket" \
@@ -3348,19 +3348,19 @@
 
 run_test    "Event-driven I/O, DTLS: ticket + client auth + resume" \
             "$P_SRV dtls=1 event=1 tickets=1 auth_mode=required" \
-            "$P_CLI dtls=1 event=1 tickets=1 reconnect=1" \
+            "$P_CLI dtls=1 event=1 tickets=1 reconnect=1 skip_close_notify=1" \
             0 \
             -c "Read from server: .* bytes read"
 
 run_test    "Event-driven I/O, DTLS: ticket + resume" \
             "$P_SRV dtls=1 event=1 tickets=1 auth_mode=none" \
-            "$P_CLI dtls=1 event=1 tickets=1 reconnect=1" \
+            "$P_CLI dtls=1 event=1 tickets=1 reconnect=1 skip_close_notify=1" \
             0 \
             -c "Read from server: .* bytes read"
 
 run_test    "Event-driven I/O, DTLS: session-id resume" \
             "$P_SRV dtls=1 event=1 tickets=0 auth_mode=none" \
-            "$P_CLI dtls=1 event=1 tickets=0 reconnect=1" \
+            "$P_CLI dtls=1 event=1 tickets=0 reconnect=1 skip_close_notify=1" \
             0 \
             -c "Read from server: .* bytes read"
 
@@ -3372,7 +3372,7 @@
 run_test    "Event-driven I/O, DTLS: session-id resume, UDP packing" \
             -p "$P_PXY pack=50" \
             "$P_SRV dtls=1 event=1 tickets=0 auth_mode=required" \
-            "$P_CLI dtls=1 event=1 tickets=0 reconnect=1" \
+            "$P_CLI dtls=1 event=1 tickets=0 reconnect=1 skip_close_notify=1" \
             0 \
             -c "Read from server: .* bytes read"
 
@@ -6378,7 +6378,7 @@
              key_file=data_files/server8.key \
              hs_timeout=10000-60000 \
              force_ciphersuite=TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256 \
-             mtu=1450 reconnect=1 reco_delay=1" \
+             mtu=1450 reconnect=1 skip_close_notify=1 reco_delay=1" \
             0 \
             -S "autoreduction" \
             -s "found fragmented DTLS handshake message" \
@@ -7225,7 +7225,7 @@
             "$P_SRV dtls=1 dgram_packing=0 hs_timeout=500-10000 tickets=0 auth_mode=none \
              psk=abc123 debug_level=3" \
             "$P_CLI dtls=1 dgram_packing=0 hs_timeout=500-10000 tickets=0 psk=abc123 \
-             debug_level=3 reconnect=1 read_timeout=1000 max_resend=10 \
+             debug_level=3 reconnect=1 skip_close_notify=1 read_timeout=1000 max_resend=10 \
              force_ciphersuite=TLS-PSK-WITH-AES-128-CCM-8" \
             0 \
             -s "a session has been resumed" \
@@ -7239,7 +7239,7 @@
             "$P_SRV dtls=1 dgram_packing=0 hs_timeout=500-10000 tickets=0 auth_mode=none \
              psk=abc123 debug_level=3 nbio=2" \
             "$P_CLI dtls=1 dgram_packing=0 hs_timeout=500-10000 tickets=0 psk=abc123 \
-             debug_level=3 reconnect=1 read_timeout=1000 max_resend=10 \
+             debug_level=3 reconnect=1 skip_close_notify=1 read_timeout=1000 max_resend=10 \
              force_ciphersuite=TLS-PSK-WITH-AES-128-CCM-8 nbio=2" \
             0 \
             -s "a session has been resumed" \