This document is a proposed interface for deciding at build time which cryptographic mechanisms to include in the PSA Cryptography interface.
This is currently a proposal for Mbed TLS. It is not currently on track for standardization in PSA.
Time-stamp: "2020/08/31 14:01:46 CEST gilpes01@e120160-lin.cambridge.arm.com"
The PSA Cryptography API specification specifies the interface between a PSA Cryptography implementation and an application. The interface defines a number of categories of cryptographic algorithms (hashes, MAC, signatures, etc.). In each category, a typical implementation offers many algorithms (e.g. for signatures: RSA-PKCS#1v1.5, RSA-PSS, ECDSA). When building the implementation for a specific use case, it is often desirable to include only a subset of the available cryptographic mechanisms, primarily in order to reduce the code footprint of the compiled system.
The present document proposes a way for an application using the PSA cryptography interface to declare which mechanisms it requires.
Mbed TLS offers a way to select which cryptographic mechanisms are included in a build through its configuration file (config.h
). This mechanism is based on two main sets of symbols: MBEDTLS_xxx_C
controls the availability of the mechanism to the application, and MBEDTLS_xxx_ALT
controls the availability of an alternative implementation, so the software implementation is only included if ``MBEDTLS_xxx_Cis defined but not
MBEDTLS_xxx_ALT`.
This is difficult to adapt to the PSA interface for several reasons. The MBEDTLS_xxx_ALT
symbols are somewhat inconsistent, and in particular do not work well for asymmetric cryptography. For example, many parts of the ECC code have no MBEDTLS_xxx_ALT
symbol, so a platform with ECC acceleration that can perform all ECDSA and ECDH operations in the accelerator would still embark the bignum
module and large parts of the ecp_curves
, ecp
and ecdsa
modules. Also the availability of a transparent driver for a mechanism does not translate directly to MBEDTLS_xxx
symbols.
[Req.interface] The application can declare which cryptographic mechanisms it needs.
[Req.inclusion] If the application does not require a mechanism, a suitably configured Mbed TLS build must not include it. The granularity of mechanisms must work for typical use cases and has acceptable limitations.
[Req.drivers] If a PSA driver is available in the build, a suitably configured Mbed TLS build must not include the corresponding software code (unless a software fallback is needed).
[Req.c] The configuration mechanism consists of C preprocessor definitions, and the build does not require tools other than a C compiler. This is necessary to allow building an application and Mbed TLS in development environments that do not allow third-party tools.
[Req.adaptability] The implementation of the mechanism must be adaptable with future evolution of the PSA cryptography specifications and Mbed TLS. Therefore the interface must remain sufficiently simple and abstract.
[Limitation.matrix] If a mechanism is defined by a combination of algorithms and key types, for example a block cipher mode (CBC, CTR, CFB, …) and a block permutation (AES, CAMELLIA, ARIA, …), there is no requirement to include only specific combinations.
[Limitation.direction] For mechanisms that have multiple directions (for example encrypt/decrypt, sign/verify), there is no requirement to include only one direction.
[Limitation.size] There is no requirement to include only support for certain key sizes.
The PSA crypto configuration file psa/crypto_config.h
defines a series of symbols of the form PSA_WANT_xxx
where xxx
. The symbols are documented in the section “PSA Crypto configuration symbols” below.
The symbol MBEDTLS_PSA_CRYPTO_CONFIG
in mbedtls/config.h
determines whether psa/crypto_config.h
. is used.
MBEDTLS_PSA_CRYPTO_CONFIG
is unset, which is the default at least in Mbed TLS 2.x versions, things are as they are today: the PSA subsystem includes generic code unconditionally, and includes support for specific mechanisms conditionally based on the existing MBEDTLS_xxx_
symbols.MBEDTLS_PSA_CRYPTO_CONFIG
is set, the necessary software implementations of cryptographic algorithms are included based on both the content of the PSA crypto configuration file and the Mbed TLS configuration file. For example, the code in aes.c
is enabled if either mbedtls/config.h
contains MBEDTLS_AES_C
or psa/crypto_config.h
contains PSA_WANT_KEY_TYPE_AES
.A PSA crypto configuration symbol is a C preprocessor symbol whose name starts with PSA_WANT_
.
1
, the corresponding feature is included.If a feature is not requested for inclusion in the PSA crypto configuration file, it may still be included in the build, either because the feature has been requested in some other way, or because the library does not support the exclusion of this feature. Mbed TLS should make a best effort to support the exclusion of all features, but in some cases this may be judged too much effort for too little benefit.
For each constant or constructor macro of the form PSA_KEY_TYPE_xxx
, the symbol PSA_WANT_KEY_TYPE_xxx
indicates that support for this key type is desired.
For asymmetric cryptography, PSA_WANT_KEY_TYPE_xxx_KEY_PAIR
determines whether private-key operations are desired, and PSA_WANT_KEY_TYPE_xxx_PUBLIC_KEY
determines whether public-key operations are desired. PSA_WANT_KEY_TYPE_xxx_KEY_PAIR
implicitly enables PSA_WANT_KEY_TYPE_xxx_PUBLIC_KEY
: there is no way to only include private-key operations (which typically saves little code).
For elliptic curve key types, only the specified curves are included. To include a curve, include a symbol of the form PSA_WANT_ECC_family_size
. For example: PSA_WANT_ECC_SECP_R1_256
for secp256r1, PSA_WANT_ECC_MONTGOMERY_CURVE25519
. It is an error to require an ECC key type but no curve, and Mbed TLS will reject this at compile time.
For each constant or constructor macro of the form PSA_ALG_xxx
, the symbol PSA_WANT_ALG_xxx
indicates that support for this algorithm is desired.
For parametrized algorithms, the PSA_WANT_ALG_xxx
symbol indicates whether the base mechanism is supported. Parameters must themselves be included through their own PSA_WANT_ALG_xxx
symbols. It is an error to include a base mechanism without at least one possible parameter, and Mbed TLS will reject this at compile time. For example, PSA_WANT_ALG_ECDSA
requires the inclusion of randomized ECDSA for all hash algorithms whose corresponding symbol PSA_WANT_ALG_xxx
is enabled.
The names of elliptic curve symbols are a bit weird: SECP_R1_256
instead of SECP256R1
. Should we make them more classical, but less systematic?
Way to request only specific groups? Not a priority: constrained devices don't do FFDH. Specify it as may change in future versions.
The two mechanisms have very different designs. Is there serious potential for confusion? Do we understand how the combinations work?
Is it realistic to mandate a compile-time error if a key type is required, but no matching algorithm, or vice versa? Is it always the right thing, for example if there is an opaque driver that manipulates this key type?
If a mechanism should only be supported in an opaque driver, what does the core need to know about it? Do we have all the information we need?
This is especially relevant to suppress a mechanism completely if there is no matching algorithm. For example, if there is no transparent implementation of RSA or ECDSA, psa_sign_hash
and psa_verify_hash
may still be needed if there is an opaque signature driver.
Is this proposal decently testable? There are a lot of combinations. What combinations should we test?