Merge development commit 8e76332 into development-psa
Additional changes to temporarily enable running tests:
ssl_srv.c and test_suite_ecdh use mbedtls_ecp_group_load instead of
mbedtls_ecdh_setup
test_suite_ctr_drbg uses mbedtls_ctr_drbg_update instead of
mbedtls_ctr_drbg_update_ret
diff --git a/include/mbedtls/camellia.h b/include/mbedtls/camellia.h
index 1555867..3eeb663 100644
--- a/include/mbedtls/camellia.h
+++ b/include/mbedtls/camellia.h
@@ -33,11 +33,17 @@
#include <stddef.h>
#include <stdint.h>
+#include "platform_util.h"
+
#define MBEDTLS_CAMELLIA_ENCRYPT 1
#define MBEDTLS_CAMELLIA_DECRYPT 0
-#define MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH -0x0024 /**< Invalid key length. */
-#define MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH -0x0026 /**< Invalid data input length. */
+#if !defined(MBEDTLS_DEPRECATED_REMOVED)
+#define MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( -0x0024 )
+#endif /* !MBEDTLS_DEPRECATED_REMOVED */
+#define MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA -0x0024 /**< Bad input data. */
+
+#define MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH -0x0026 /**< Invalid data input length. */
/* MBEDTLS_ERR_CAMELLIA_HW_ACCEL_FAILED is deprecated and should not be used.
*/
@@ -66,52 +72,68 @@
#endif /* MBEDTLS_CAMELLIA_ALT */
/**
- * \brief Initialize CAMELLIA context
+ * \brief Initialize a CAMELLIA context.
*
- * \param ctx CAMELLIA context to be initialized
+ * \param ctx The CAMELLIA context to be initialized.
+ * This must not be \c NULL.
*/
void mbedtls_camellia_init( mbedtls_camellia_context *ctx );
/**
- * \brief Clear CAMELLIA context
+ * \brief Clear a CAMELLIA context.
*
- * \param ctx CAMELLIA context to be cleared
+ * \param ctx The CAMELLIA context to be cleared. This may be \c NULL,
+ * in which case this function returns immediately. If it is not
+ * \c NULL, it must be initialized.
*/
void mbedtls_camellia_free( mbedtls_camellia_context *ctx );
/**
- * \brief CAMELLIA key schedule (encryption)
+ * \brief Perform a CAMELLIA key schedule operation for encryption.
*
- * \param ctx CAMELLIA context to be initialized
- * \param key encryption key
- * \param keybits must be 128, 192 or 256
+ * \param ctx The CAMELLIA context to use. This must be initialized.
+ * \param key The encryption key to use. This must be a readable buffer
+ * of size \p keybits Bits.
+ * \param keybits The length of \p key in Bits. This must be either \c 128,
+ * \c 192 or \c 256.
*
- * \return 0 if successful, or MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH
+ * \return \c 0 if successful.
+ * \return A negative error code on failure.
*/
-int mbedtls_camellia_setkey_enc( mbedtls_camellia_context *ctx, const unsigned char *key,
- unsigned int keybits );
+int mbedtls_camellia_setkey_enc( mbedtls_camellia_context *ctx,
+ const unsigned char *key,
+ unsigned int keybits );
/**
- * \brief CAMELLIA key schedule (decryption)
+ * \brief Perform a CAMELLIA key schedule operation for decryption.
*
- * \param ctx CAMELLIA context to be initialized
- * \param key decryption key
- * \param keybits must be 128, 192 or 256
+ * \param ctx The CAMELLIA context to use. This must be initialized.
+ * \param key The decryption key. This must be a readable buffer
+ * of size \p keybits Bits.
+ * \param keybits The length of \p key in Bits. This must be either \c 128,
+ * \c 192 or \c 256.
*
- * \return 0 if successful, or MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH
+ * \return \c 0 if successful.
+ * \return A negative error code on failure.
*/
-int mbedtls_camellia_setkey_dec( mbedtls_camellia_context *ctx, const unsigned char *key,
- unsigned int keybits );
+int mbedtls_camellia_setkey_dec( mbedtls_camellia_context *ctx,
+ const unsigned char *key,
+ unsigned int keybits );
/**
- * \brief CAMELLIA-ECB block encryption/decryption
+ * \brief Perform a CAMELLIA-ECB block encryption/decryption operation.
*
- * \param ctx CAMELLIA context
- * \param mode MBEDTLS_CAMELLIA_ENCRYPT or MBEDTLS_CAMELLIA_DECRYPT
- * \param input 16-byte input block
- * \param output 16-byte output block
+ * \param ctx The CAMELLIA context to use. This must be initialized
+ * and bound to a key.
+ * \param mode The mode of operation. This must be either
+ * #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
+ * \param input The input block. This must be a readable buffer
+ * of size \c 16 Bytes.
+ * \param output The output block. This must be a writable buffer
+ * of size \c 16 Bytes.
*
- * \return 0 if successful
+ * \return \c 0 if successful.
+ * \return A negative error code on failure.
*/
int mbedtls_camellia_crypt_ecb( mbedtls_camellia_context *ctx,
int mode,
@@ -120,9 +142,7 @@
#if defined(MBEDTLS_CIPHER_MODE_CBC)
/**
- * \brief CAMELLIA-CBC buffer encryption/decryption
- * Length should be a multiple of the block
- * size (16 bytes)
+ * \brief Perform a CAMELLIA-CBC buffer encryption/decryption operation.
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
@@ -132,15 +152,22 @@
* IV, you should either save it manually or use the cipher
* module instead.
*
- * \param ctx CAMELLIA context
- * \param mode MBEDTLS_CAMELLIA_ENCRYPT or MBEDTLS_CAMELLIA_DECRYPT
- * \param length length of the input data
- * \param iv initialization vector (updated after use)
- * \param input buffer holding the input data
- * \param output buffer holding the output data
+ * \param ctx The CAMELLIA context to use. This must be initialized
+ * and bound to a key.
+ * \param mode The mode of operation. This must be either
+ * #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
+ * \param length The length in Bytes of the input data \p input.
+ * This must be a multiple of \c 16 Bytes.
+ * \param iv The initialization vector. This must be a read/write buffer
+ * of length \c 16 Bytes. It is updated to allow streaming
+ * use as explained above.
+ * \param input The buffer holding the input data. This must point to a
+ * readable buffer of length \p length Bytes.
+ * \param output The buffer holding the output data. This must point to a
+ * writable buffer of length \p length Bytes.
*
- * \return 0 if successful, or
- * MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH
+ * \return \c 0 if successful.
+ * \return A negative error code on failure.
*/
int mbedtls_camellia_crypt_cbc( mbedtls_camellia_context *ctx,
int mode,
@@ -152,11 +179,14 @@
#if defined(MBEDTLS_CIPHER_MODE_CFB)
/**
- * \brief CAMELLIA-CFB128 buffer encryption/decryption
+ * \brief Perform a CAMELLIA-CFB128 buffer encryption/decryption
+ * operation.
*
- * Note: Due to the nature of CFB you should use the same key schedule for
- * both encryption and decryption. So a context initialized with
- * mbedtls_camellia_setkey_enc() for both MBEDTLS_CAMELLIA_ENCRYPT and CAMELLIE_DECRYPT.
+ * \note Due to the nature of CFB mode, you should use the same
+ * key for both encryption and decryption. In particular, calls
+ * to this function should be preceded by a key-schedule via
+ * mbedtls_camellia_setkey_enc() regardless of whether \p mode
+ * is #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
@@ -166,16 +196,24 @@
* IV, you should either save it manually or use the cipher
* module instead.
*
- * \param ctx CAMELLIA context
- * \param mode MBEDTLS_CAMELLIA_ENCRYPT or MBEDTLS_CAMELLIA_DECRYPT
- * \param length length of the input data
- * \param iv_off offset in IV (updated after use)
- * \param iv initialization vector (updated after use)
- * \param input buffer holding the input data
- * \param output buffer holding the output data
+ * \param ctx The CAMELLIA context to use. This must be initialized
+ * and bound to a key.
+ * \param mode The mode of operation. This must be either
+ * #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
+ * \param length The length of the input data \p input. Any value is allowed.
+ * \param iv_off The current offset in the IV. This must be smaller
+ * than \c 16 Bytes. It is updated after this call to allow
+ * the aforementioned streaming usage.
+ * \param iv The initialization vector. This must be a read/write buffer
+ * of length \c 16 Bytes. It is updated after this call to
+ * allow the aforementioned streaming usage.
+ * \param input The buffer holding the input data. This must be a readable
+ * buffer of size \p length Bytes.
+ * \param output The buffer to hold the output data. This must be a writable
+ * buffer of length \p length Bytes.
*
- * \return 0 if successful, or
- * MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH
+ * \return \c 0 if successful.
+ * \return A negative error code on failure.
*/
int mbedtls_camellia_crypt_cfb128( mbedtls_camellia_context *ctx,
int mode,
@@ -188,11 +226,13 @@
#if defined(MBEDTLS_CIPHER_MODE_CTR)
/**
- * \brief CAMELLIA-CTR buffer encryption/decryption
+ * \brief Perform a CAMELLIA-CTR buffer encryption/decryption operation.
*
- * Note: Due to the nature of CTR you should use the same key schedule for
- * both encryption and decryption. So a context initialized with
- * mbedtls_camellia_setkey_enc() for both MBEDTLS_CAMELLIA_ENCRYPT and MBEDTLS_CAMELLIA_DECRYPT.
+ * *note Due to the nature of CTR mode, you should use the same
+ * key for both encryption and decryption. In particular, calls
+ * to this function should be preceded by a key-schedule via
+ * mbedtls_camellia_setkey_enc() regardless of whether \p mode
+ * is #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
*
* \warning You must never reuse a nonce value with the same key. Doing so
* would void the encryption for the two messages encrypted with
@@ -215,41 +255,49 @@
* per-message nonce, handled by yourself, and the second one
* updated by this function internally.
*
- * For example, you might reserve the first 12 bytes for the
- * per-message nonce, and the last 4 bytes for internal use. In that
- * case, before calling this function on a new message you need to
- * set the first 12 bytes of \p nonce_counter to your chosen nonce
- * value, the last 4 to 0, and \p nc_off to 0 (which will cause \p
- * stream_block to be ignored). That way, you can encrypt at most
- * 2**96 messages of up to 2**32 blocks each with the same key.
+ * For example, you might reserve the first \c 12 Bytes for the
+ * per-message nonce, and the last \c 4 Bytes for internal use.
+ * In that case, before calling this function on a new message you
+ * need to set the first \c 12 Bytes of \p nonce_counter to your
+ * chosen nonce value, the last four to \c 0, and \p nc_off to \c 0
+ * (which will cause \p stream_block to be ignored). That way, you
+ * can encrypt at most \c 2**96 messages of up to \c 2**32 blocks
+ * each with the same key.
*
* The per-message nonce (or information sufficient to reconstruct
- * it) needs to be communicated with the ciphertext and must be unique.
- * The recommended way to ensure uniqueness is to use a message
- * counter. An alternative is to generate random nonces, but this
- * limits the number of messages that can be securely encrypted:
- * for example, with 96-bit random nonces, you should not encrypt
- * more than 2**32 messages with the same key.
+ * it) needs to be communicated with the ciphertext and must be
+ * unique. The recommended way to ensure uniqueness is to use a
+ * message counter. An alternative is to generate random nonces,
+ * but this limits the number of messages that can be securely
+ * encrypted: for example, with 96-bit random nonces, you should
+ * not encrypt more than 2**32 messages with the same key.
*
* Note that for both stategies, sizes are measured in blocks and
- * that a CAMELLIA block is 16 bytes.
+ * that a CAMELLIA block is \c 16 Bytes.
*
* \warning Upon return, \p stream_block contains sensitive data. Its
* content must not be written to insecure storage and should be
* securely discarded as soon as it's no longer needed.
*
- * \param ctx CAMELLIA context
- * \param length The length of the data
- * \param nc_off The offset in the current stream_block (for resuming
+ * \param ctx The CAMELLIA context to use. This must be initialized
+ * and bound to a key.
+ * \param length The length of the input data \p input in Bytes.
+ * Any value is allowed.
+ * \param nc_off The offset in the current \p stream_block (for resuming
* within current cipher stream). The offset pointer to
- * should be 0 at the start of a stream.
- * \param nonce_counter The 128-bit nonce and counter.
- * \param stream_block The saved stream-block for resuming. Is overwritten
- * by the function.
- * \param input The input data stream
- * \param output The output data stream
+ * should be \c 0 at the start of a stream. It is updated
+ * at the end of this call.
+ * \param nonce_counter The 128-bit nonce and counter. This must be a read/write
+ * buffer of length \c 16 Bytes.
+ * \param stream_block The saved stream-block for resuming. This must be a
+ * read/write buffer of length \c 16 Bytes.
+ * \param input The input data stream. This must be a readable buffer of
+ * size \p length Bytes.
+ * \param output The output data stream. This must be a writable buffer
+ * of size \p length Bytes.
*
- * \return 0 if successful
+ * \return \c 0 if successful.
+ * \return A negative error code on failure.
*/
int mbedtls_camellia_crypt_ctr( mbedtls_camellia_context *ctx,
size_t length,
@@ -260,6 +308,8 @@
unsigned char *output );
#endif /* MBEDTLS_CIPHER_MODE_CTR */
+#if defined(MBEDTLS_SELF_TEST)
+
/**
* \brief Checkup routine
*
@@ -267,6 +317,8 @@
*/
int mbedtls_camellia_self_test( int verbose );
+#endif /* MBEDTLS_SELF_TEST */
+
#ifdef __cplusplus
}
#endif