diff --git a/library/mps_reader.c b/library/mps_reader.c
new file mode 100644
index 0000000..e6fbb07
--- /dev/null
+++ b/library/mps_reader.c
@@ -0,0 +1,513 @@
+/*
+ *  Message Processing Stack, Reader implementation
+ *
+ *  Copyright The Mbed TLS Contributors
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of Mbed TLS (https://tls.mbed.org)
+ */
+
+#include "mps_reader.h"
+#include "mps_common.h"
+#include "mps_trace.h"
+
+#include <string.h>
+
+#if ( defined(__ARMCC_VERSION) || defined(_MSC_VER) ) && \
+    !defined(inline) && !defined(__cplusplus)
+#define inline __inline
+#endif
+
+#if defined(MBEDTLS_MPS_TRACE)
+static int trace_id = TRACE_BIT_READER;
+#endif /* MBEDTLS_MPS_TRACE */
+
+/*
+ * GENERAL NOTE ON CODING STYLE
+ *
+ * The following code intentionally separates memory loads
+ * and stores from other operations (arithmetic or branches).
+ * This leads to the introduction of many local variables
+ * and significantly increases the C-code line count, but
+ * should not increase the size of generated assembly.
+ *
+ * This reason for this is twofold:
+ * (1) It will ease verification efforts using the VST
+ *     whose program logic cannot directly reason
+ *     about instructions containing a load or store in
+ *     addition to other operations (e.g. *p = *q or
+ *     tmp = *p + 42).
+ * (2) Operating on local variables and writing the results
+ *     back to the target contexts on success only
+ *     allows to maintain structure invariants even
+ *     on failure - this in turn has two benefits:
+ *     (2.a) If for some reason an error code is not caught
+ *           and operation continues, functions are nonetheless
+ *           called with sane contexts, reducing the risk
+ *           of dangerous behavior.
+ *     (2.b) Randomized testing is easier if structures
+ *           remain intact even in the face of failing
+ *           and/or non-sensical calls.
+ *     Moreover, it might even reduce code-size because
+ *     the compiler need not write back temporary results
+ *     to memory in case of failure.
+ *
+ */
+
+static inline void mps_reader_zero( mbedtls_reader *rd )
+{
+    /* A plain memset() would likely be more efficient,
+     * but the current way of zeroing makes it harder
+     * to overlook fields which should not be zero-initialized.
+     * It's also more suitable for VF efforts since it
+     * doesn't require reasoning about structs being
+     * interpreted as unstructured binary blobs. */
+    static mbedtls_reader const zero =
+        { .frag      = NULL,
+          .frag_len  = 0,
+          .commit    = 0,
+          .end       = 0,
+          .pending   = 0,
+          .acc       = NULL,
+          .acc_len   = 0,
+          .acc_avail = 0,
+          .acc_share  = { .acc_remaining = 0 }
+        };
+    *rd = zero;
+}
+
+int mbedtls_reader_init( mbedtls_reader *rd,
+                         unsigned char *acc,
+                         mbedtls_mps_size_t acc_len )
+{
+    TRACE_INIT( "reader_init, acc len %u", (unsigned) acc_len );
+    mps_reader_zero( rd );
+    rd->acc = acc;
+    rd->acc_len = acc_len;
+    RETURN( 0 );
+}
+
+int mbedtls_reader_free( mbedtls_reader *rd )
+{
+    TRACE_INIT( "reader_free" );
+    mps_reader_zero( rd );
+    RETURN( 0 );
+}
+
+int mbedtls_reader_feed( mbedtls_reader *rd,
+                         unsigned char *new_frag,
+                         mbedtls_mps_size_t new_frag_len )
+{
+    unsigned char *acc;
+    mbedtls_mps_size_t copy_to_acc;
+    TRACE_INIT( "reader_feed, frag %p, len %u",
+                (void*) new_frag, (unsigned) new_frag_len );
+
+    if( new_frag == NULL )
+        RETURN( MBEDTLS_ERR_MPS_READER_INVALID_ARG );
+
+    MBEDTLS_MPS_STATE_VALIDATE_RAW( rd->frag == NULL,
+        "mbedtls_reader_feed() requires reader to be in producing mode" );
+
+    acc = rd->acc;
+    if( acc != NULL )
+    {
+        mbedtls_mps_size_t aa, ar;
+
+        ar = rd->acc_share.acc_remaining;
+        aa = rd->acc_avail;
+
+        copy_to_acc = ar;
+        if( copy_to_acc > new_frag_len )
+            copy_to_acc = new_frag_len;
+
+        acc += aa;
+
+        if( copy_to_acc > 0 )
+            memcpy( acc, new_frag, copy_to_acc );
+
+        TRACE( trace_comment, "Copy new data of size %u of %u into accumulator at offset %u",
+                (unsigned) copy_to_acc, (unsigned) new_frag_len, (unsigned) aa );
+
+        /* Check if, with the new fragment, we have enough data. */
+        ar -= copy_to_acc;
+        if( ar > 0 )
+        {
+            /* Need more data */
+            aa += copy_to_acc;
+            rd->acc_share.acc_remaining = ar;
+            rd->acc_avail = aa;
+            RETURN( MBEDTLS_ERR_MPS_READER_NEED_MORE );
+        }
+
+        TRACE( trace_comment, "Enough data available to serve user request" );
+
+        rd->acc_share.frag_offset = aa;
+        aa += copy_to_acc;
+        rd->acc_avail = aa;
+    }
+    else
+    {
+        rd->acc_share.frag_offset = 0;
+    }
+
+    rd->frag = new_frag;
+    rd->frag_len = new_frag_len;
+    rd->commit = 0;
+    rd->end = 0;
+    RETURN( 0 );
+}
+
+
+int mbedtls_reader_get( mbedtls_reader *rd,
+                        mbedtls_mps_size_t desired,
+                        unsigned char **buffer,
+                        mbedtls_mps_size_t *buflen )
+{
+    unsigned char *frag, *acc;
+    mbedtls_mps_size_t end, fo, fl, frag_fetched, frag_remaining;
+    TRACE_INIT( "reader_get %p, desired %u", (void*) rd, (unsigned) desired );
+
+    frag = rd->frag;
+    MBEDTLS_MPS_STATE_VALIDATE_RAW( frag != NULL,
+          "mbedtls_reader_get() requires reader to be in consuming mode" );
+
+    /* The fragment offset indicates the offset of the fragment
+     * from the accmulator, if the latter is present. Use a offset
+     * of \c 0 if no accumulator is used. */
+    acc = rd->acc;
+    if( acc == NULL )
+        fo = 0;
+    else
+        fo = rd->acc_share.frag_offset;
+
+    TRACE( trace_comment, "frag_off %u, end %u, acc_avail %d",
+            (unsigned) fo, (unsigned) rd->end,
+            acc == NULL ? -1 : (int) rd->acc_avail );
+
+    /* Check if we're still serving from the accumulator. */
+    end = rd->end;
+    if( end < fo )
+    {
+        TRACE( trace_comment, "Serve the request from the accumulator" );
+        if( fo - end < desired )
+        {
+            /* Illustration of supported and unsupported cases:
+             *
+             * - Allowed #1
+             *
+             *                          +-----------------------------------+
+             *                          |               frag                |
+             *                          +-----------------------------------+
+             *
+             *             end end+desired
+             *              |       |
+             *        +-----v-------v-------------+
+             *        |          acc              |
+             *        +---------------------------+
+             *                          |         |
+             *                   fo/frag_offset aa/acc_avail
+             *
+             * - Allowed #2
+             *
+             *                          +-----------------------------------+
+             *                          |               frag                |
+             *                          +-----------------------------------+
+             *
+             *                  end          end+desired
+             *                   |                |
+             *        +----------v----------------v
+             *        |          acc              |
+             *        +---------------------------+
+             *                          |         |
+             *                   fo/frag_offset aa/acc_avail
+             *
+             * - Not allowed #1 (could be served, but we don't actually use it):
+             *
+             *                      +-----------------------------------+
+             *                      |               frag                |
+             *                      +-----------------------------------+
+             *
+             *              end        end+desired
+             *               |             |
+             *        +------v-------------v------+
+             *        |          acc              |
+             *        +---------------------------+
+             *                      |              |
+             *                fo/frag_offset   aa/acc_avail
+             *
+             *
+             * - Not allowed #2 (can't be served with a contiguous buffer):
+             *
+             *                      +-----------------------------------+
+             *                      |               frag                |
+             *                      +-----------------------------------+
+             *
+             *              end                 end + desired
+             *               |                        |
+             *        +------v--------------------+   v
+             *        |            acc            |
+             *        +---------------------------+
+             *                      |             |
+             *                fo/frag_offset   aa/acc_avail
+             *
+             * In case of Allowed #1 and #2 we're switching to serve from
+             * `frag` starting from the next call to mbedtls_reader_get().
+             */
+
+            mbedtls_mps_size_t aa;
+            aa = rd->acc_avail;
+            if( aa - end != desired )
+            {
+                /* It might be possible to serve some of these situations by
+                 * making additional space in the accumulator, removing those
+                 * parts that have already been committed.
+                 * On the other hand, this brings additional complexity and
+                 * enlarges the code size, while there doesn't seem to be a use
+                 * case where we don't attempt exactly the same `get` calls when
+                 * resuming on a reader than what we tried before pausing it.
+                 * If we believe we adhere to this restricted usage throughout
+                 * the library, this check is a good opportunity to
+                 * validate this. */
+                RETURN( MBEDTLS_ERR_MPS_READER_INCONSISTENT_REQUESTS );
+            }
+        }
+
+        acc += end;
+        *buffer = acc;
+        if( buflen != NULL )
+            *buflen = desired;
+
+        end += desired;
+        rd->end = end;
+        rd->pending = 0;
+
+        RETURN( 0 );
+    }
+
+    /* Attempt to serve the request from the current fragment */
+    TRACE( trace_comment, "Serve the request from the current fragment." );
+
+    fl = rd->frag_len;
+    frag_fetched = end - fo; /* The amount of data from the current fragment
+                              * that has already been passed to the user. */
+    frag += frag_fetched;
+    frag_remaining = fl - frag_fetched; /* Remaining data in fragment */
+
+    /* Check if we can serve the read request from the fragment. */
+    if( frag_remaining < desired )
+    {
+        TRACE( trace_comment, "There's not enough data in the current fragment to serve the request." );
+        /* There's not enough data in the current fragment,
+         * so either just RETURN what we have or fail. */
+        if( buflen == NULL )
+        {
+            if( frag_remaining > 0 )
+            {
+                rd->pending = desired - frag_remaining;
+                TRACE( trace_comment, "Remember to collect %u bytes before re-opening",
+                       (unsigned) rd->pending );
+            }
+            RETURN( MBEDTLS_ERR_MPS_READER_OUT_OF_DATA );
+        }
+
+        desired = frag_remaining;
+    }
+
+    /* There's enough data in the current fragment to serve the
+     * (potentially modified) read request. */
+    *buffer = frag;
+    if( buflen != NULL )
+        *buflen = desired;
+
+    end += desired;
+    rd->end = end;
+    rd->pending = 0;
+    RETURN( 0 );
+}
+
+int mbedtls_reader_commit( mbedtls_reader *rd )
+{
+    unsigned char *acc;
+    mbedtls_mps_size_t aa, end, fo, shift;
+    TRACE_INIT( "reader_commit" );
+
+    MBEDTLS_MPS_STATE_VALIDATE_RAW( rd->frag != NULL,
+       "mbedtls_reader_commit() requires reader to be in consuming mode" );
+
+    acc = rd->acc;
+    end = rd->end;
+
+    if( acc == NULL )
+    {
+        TRACE( trace_comment, "No accumulator, just shift end" );
+        rd->commit = end;
+        RETURN( 0 );
+    }
+
+    fo = rd->acc_share.frag_offset;
+    if( end >= fo )
+    {
+        TRACE( trace_comment, "Started to serve fragment, get rid of accumulator" );
+        shift = fo;
+        aa = 0;
+    }
+    else
+    {
+        TRACE( trace_comment, "Still serving from accumulator" );
+        aa = rd->acc_avail;
+        shift = end;
+        memmove( acc, acc + shift, aa - shift );
+        aa -= shift;
+    }
+
+    end -= shift;
+    fo -= shift;
+
+    rd->acc_share.frag_offset = fo;
+    rd->acc_avail = aa;
+    rd->commit = end;
+    rd->end = end;
+
+    TRACE( trace_comment, "Final state: (end=commit,fo,avail) = (%u,%u,%u)",
+           (unsigned) end, (unsigned) fo, (unsigned) aa );
+    RETURN( 0 );
+}
+
+int mbedtls_reader_reclaim( mbedtls_reader *rd,
+                            mbedtls_mps_size_t *paused )
+{
+    unsigned char *frag, *acc;
+    mbedtls_mps_size_t pending, commit;
+    mbedtls_mps_size_t al, fo, fl;
+    TRACE_INIT( "reader_reclaim" );
+
+    if( paused != NULL )
+        *paused = 0;
+
+    frag = rd->frag;
+    MBEDTLS_MPS_STATE_VALIDATE_RAW( frag != NULL,
+           "mbedtls_reader_reclaim() requires reader to be in consuming mode" );
+
+    acc     = rd->acc;
+    pending = rd->pending;
+    commit  = rd->commit;
+    fl      = rd->frag_len;
+
+    if( acc == NULL )
+        fo = 0;
+    else
+        fo = rd->acc_share.frag_offset;
+
+    if( pending == 0 )
+    {
+        TRACE( trace_comment, "No unsatisfied read-request has been logged." );
+        /* Check if there's data left to be consumed. */
+        if( commit < fo || commit - fo < fl )
+        {
+            TRACE( trace_comment, "There is data left to be consumed." );
+            rd->end = commit;
+            RETURN( MBEDTLS_ERR_MPS_READER_DATA_LEFT );
+        }
+        TRACE( trace_comment, "The fragment has been completely processed and committed." );
+    }
+    else
+    {
+        mbedtls_mps_size_t frag_backup_offset;
+        mbedtls_mps_size_t frag_backup_len;
+        TRACE( trace_comment, "There has been an unsatisfied read-request with %u bytes overhead.",
+               (unsigned) pending );
+
+        if( acc == NULL )
+        {
+            TRACE( trace_comment, "No accumulator present" );
+            RETURN( MBEDTLS_ERR_MPS_READER_NEED_ACCUMULATOR );
+        }
+        al = rd->acc_len;
+
+        /* Check if the upper layer has already fetched
+         * and committed the contents of the accumulator. */
+        if( commit < fo )
+        {
+            /* No, accumulator is still being processed. */
+            int overflow;
+            TRACE( trace_comment, "Still processing data from the accumulator" );
+
+            overflow =
+                ( fo + fl < fo ) || ( fo + fl + pending < fo + fl );
+            if( overflow || al < fo + fl + pending )
+            {
+                rd->end = commit;
+                rd->pending = 0;
+                TRACE( trace_error, "The accumulator is too small to handle the backup." );
+                TRACE( trace_error, "* Remaining size: %u", (unsigned) al );
+                TRACE( trace_error, "* Needed: %u (%u + %u + %u)",
+                       (unsigned) ( fo + fl + pending ),
+                       (unsigned) fo, (unsigned) fl, (unsigned) pending );
+                RETURN( MBEDTLS_ERR_MPS_READER_ACCUMULATOR_TOO_SMALL );
+            }
+            frag_backup_offset = 0;
+            frag_backup_len = fl;
+        }
+        else
+        {
+            /* Yes, the accumulator is already processed. */
+            int overflow;
+            TRACE( trace_comment, "The accumulator has already been processed" );
+
+            frag_backup_offset = commit;
+            frag_backup_len = fl - commit;
+            overflow = ( frag_backup_len + pending < pending );
+
+            if( overflow ||
+                al - fo < frag_backup_len + pending )
+            {
+                rd->end = commit;
+                rd->pending = 0;
+                TRACE( trace_error, "The accumulator is too small to handle the backup." );
+                TRACE( trace_error, "* Remaining size: %u", (unsigned) ( al - fo ) );
+                TRACE( trace_error, "* Needed: %u (%u + %u)",
+                       (unsigned) ( frag_backup_len + pending ),
+                       (unsigned) frag_backup_len, (unsigned) pending );
+                RETURN( MBEDTLS_ERR_MPS_READER_ACCUMULATOR_TOO_SMALL );
+            }
+        }
+
+        frag += frag_backup_offset;
+        acc += fo;
+        memcpy( acc, frag, frag_backup_len );
+
+        TRACE( trace_comment, "Backup %u bytes into accumulator",
+               (unsigned) frag_backup_len );
+
+        rd->acc_avail = fo + frag_backup_len;
+        rd->acc_share.acc_remaining = pending;
+
+        if( paused != NULL )
+            *paused = 1;
+    }
+
+    rd->frag     = NULL;
+    rd->frag_len = 0;
+
+    rd->commit = 0;
+    rd->end    = 0;
+    rd->pending  = 0;
+
+    TRACE( trace_comment, "Final state: aa %u, al %u, ar %u",
+           (unsigned) rd->acc_avail, (unsigned) rd->acc_len,
+           (unsigned) rd->acc_share.acc_remaining );
+    RETURN( 0 );
+}