diff --git a/include/mbedtls/ecdh.h b/include/mbedtls/ecdh.h
index 435ba00..f6e6702 100644
--- a/include/mbedtls/ecdh.h
+++ b/include/mbedtls/ecdh.h
@@ -1,9 +1,19 @@
 /**
  * \file ecdh.h
  *
- * \brief Elliptic curve Diffie-Hellman
+ * \brief This file contains ECDH definitions and functions.
  *
- *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ * The Elliptic Curve Diffie-Hellman (ECDH) protocol is an anonymous
+ * key agreement protocol allowing two parties to establish a shared
+ * secret over an insecure channel. Each party must have an
+ * elliptic-curve public–private key pair.
+ *
+ * For more information, see <em>NIST SP 800-56A Rev. 2: Recommendation for
+ * Pair-Wise Key Establishment Schemes Using Discrete Logarithm
+ * Cryptography</em>.
+ */
+/*
+ *  Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
  *  SPDX-License-Identifier: Apache-2.0
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may
@@ -18,8 +28,9 @@
  *  See the License for the specific language governing permissions and
  *  limitations under the License.
  *
- *  This file is part of mbed TLS (https://tls.mbed.org)
+ *  This file is part of Mbed TLS (https://tls.mbed.org)
  */
+
 #ifndef MBEDTLS_ECDH_H
 #define MBEDTLS_ECDH_H
 
@@ -30,52 +41,59 @@
 #endif
 
 /**
- * When importing from an EC key, select if it is our key or the peer's key
+ * Defines the source of the imported EC key.
  */
 typedef enum
 {
-    MBEDTLS_ECDH_OURS,
-    MBEDTLS_ECDH_THEIRS,
+    MBEDTLS_ECDH_OURS,   /**< Our key. */
+    MBEDTLS_ECDH_THEIRS, /**< The key of the peer. */
 } mbedtls_ecdh_side;
 
 /**
- * \brief           ECDH context structure
  *
  * \warning         Performing multiple operations concurrently on the same
  *                  ECDSA context is not supported; objects of this type
  *                  should not be shared between multiple threads.
+ * \brief           The ECDH context structure.
  */
 typedef struct
 {
-    mbedtls_ecp_group grp;      /*!<  elliptic curve used                   */
-    mbedtls_mpi d;              /*!<  our secret value (private key)        */
-    mbedtls_ecp_point Q;        /*!<  our public value (public key)         */
-    mbedtls_ecp_point Qp;       /*!<  peer's public value (public key)      */
-    mbedtls_mpi z;              /*!<  shared secret                         */
-    int point_format;           /*!<  format for point export in TLS        */
-    mbedtls_ecp_point Vi;       /*!<  blinding value (for later)            */
-    mbedtls_ecp_point Vf;       /*!<  un-blinding value (for later)         */
-    mbedtls_mpi _d;             /*!<  previous d (for later)                */
+    mbedtls_ecp_group grp;   /*!< The elliptic curve used. */
+    mbedtls_mpi d;           /*!< The private key. */
+    mbedtls_ecp_point Q;     /*!< The public key. */
+    mbedtls_ecp_point Qp;    /*!< The value of the public key of the peer. */
+    mbedtls_mpi z;           /*!< The shared secret. */
+    int point_format;        /*!< The format of point export in TLS messages. */
+    mbedtls_ecp_point Vi;    /*!< The blinding value. */
+    mbedtls_ecp_point Vf;    /*!< The unblinding value. */
+    mbedtls_mpi _d;          /*!< The previous \p d. */
 #if defined(MBEDTLS_ECP_RESTARTABLE)
-    int restart_enabled;        /*!<  enable restartalbe EC computations?   */
-    mbedtls_ecp_restart_ctx rs; /*!<  restart context for EC computations   */
+    int restart_enabled;        /*!< The flag for restartable mode. */
+    mbedtls_ecp_restart_ctx rs; /*!< The restart context for EC computations. */
 #endif
 }
 mbedtls_ecdh_context;
 
 /**
- * \brief           Generate a public key.
- *                  Raw function that only does the core computation.
+ * \brief           This function generates an ECDH keypair on an elliptic
+ *                  curve.
  *
- * \param grp       ECP group
- * \param d         Destination MPI (secret exponent, aka private key)
- * \param Q         Destination point (public key)
- * \param f_rng     RNG function
- * \param p_rng     RNG parameter
+ *                  This function performs the first of two core computations
+ *                  implemented during the ECDH key exchange. The second core
+ *                  computation is performed by mbedtls_ecdh_compute_shared().
  *
- * \return          0 if successful,
- *                  or a MBEDTLS_ERR_ECP_XXX or MBEDTLS_MPI_XXX error code
- *                  MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
+ * \see             ecp.h
+ *
+ * \param grp       The ECP group.
+ * \param d         The destination MPI (private key).
+ * \param Q         The destination point (public key).
+ * \param f_rng     The RNG function.
+ * \param p_rng     The RNG context.
+ *
+ * \return          \c 0 on success.
+ * \return          An \c MBEDTLS_ERR_ECP_XXX or
+ *                  \c MBEDTLS_MPI_XXX error code on failure.
+ * \return          #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
  *                  operations was reached: see \c mbedtls_ecp_set_max_ops().
  */
 int mbedtls_ecdh_gen_public( mbedtls_ecp_group *grp, mbedtls_mpi *d, mbedtls_ecp_point *Q,
@@ -83,24 +101,30 @@
                      void *p_rng );
 
 /**
- * \brief           Compute shared secret
- *                  Raw function that only does the core computation.
+ * \brief           This function computes the shared secret.
  *
- * \param grp       ECP group
- * \param z         Destination MPI (shared secret)
- * \param Q         Public key from other party
- * \param d         Our secret exponent (private key)
- * \param f_rng     RNG function (see notes)
- * \param p_rng     RNG parameter
+ *                  This function performs the second of two core computations
+ *                  implemented during the ECDH key exchange. The first core
+ *                  computation is performed by mbedtls_ecdh_gen_public().
  *
- * \return          0 if successful,
- *                  or a MBEDTLS_ERR_ECP_XXX or MBEDTLS_MPI_XXX error code
- *                  MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
+ * \see             ecp.h
+ *
+ * \note            If \p f_rng is not NULL, it is used to implement
+ *                  countermeasures against side-channel attacks.
+ *                  For more information, see mbedtls_ecp_mul().
+ *
+ * \param grp       The ECP group.
+ * \param z         The destination MPI (shared secret).
+ * \param Q         The public key from another party.
+ * \param d         Our secret exponent (private key).
+ * \param f_rng     The RNG function.
+ * \param p_rng     The RNG context.
+ *
+ * \return          \c 0 on success.
+ * \return          An \c MBEDTLS_ERR_ECP_XXX or
+ *                  \c MBEDTLS_MPI_XXX error code on failure.
+ * \return          #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
  *                  operations was reached: see \c mbedtls_ecp_set_max_ops().
- *
- * \note            If f_rng is not NULL, it is used to implement
- *                  countermeasures against potential elaborate timing
- *                  attacks, see \c mbedtls_ecp_mul() for details.
  */
 int mbedtls_ecdh_compute_shared( mbedtls_ecp_group *grp, mbedtls_mpi *z,
                          const mbedtls_ecp_point *Q, const mbedtls_mpi *d,
@@ -108,35 +132,42 @@
                          void *p_rng );
 
 /**
- * \brief           Initialize context
+ * \brief           This function initializes an ECDH context.
  *
- * \param ctx       Context to initialize
+ * \param ctx       The ECDH context to initialize.
  */
 void mbedtls_ecdh_init( mbedtls_ecdh_context *ctx );
 
 /**
- * \brief           Free context
+ * \brief           This function frees a context.
  *
- * \param ctx       Context to free
+ * \param ctx       The context to free.
  */
 void mbedtls_ecdh_free( mbedtls_ecdh_context *ctx );
 
 /**
- * \brief           Generate a public key and a TLS ServerKeyExchange payload.
- *                  (First function used by a TLS server for ECDHE.)
+ * \brief           This function generates a public key and a TLS
+ *                  ServerKeyExchange payload.
  *
- * \param ctx       ECDH context
- * \param olen      number of chars written
- * \param buf       destination buffer
- * \param blen      length of buffer
- * \param f_rng     RNG function
- * \param p_rng     RNG parameter
+ *                  This is the first function used by a TLS server for ECDHE
+ *                  ciphersuites.
  *
- * \note            This function assumes that ctx->grp has already been
- *                  properly set (for example using mbedtls_ecp_group_load).
+ * \note            This function assumes that the ECP group (grp) of the
+ *                  \p ctx context has already been properly set,
+ *                  for example, using mbedtls_ecp_group_load().
  *
- * \return          0 if successful, or an MBEDTLS_ERR_ECP_XXX error code
- *                  MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
+ * \see             ecp.h
+ *
+ * \param ctx       The ECDH context.
+ * \param olen      The number of characters written.
+ * \param buf       The destination buffer.
+ * \param blen      The length of the destination buffer.
+ * \param f_rng     The RNG function.
+ * \param p_rng     The RNG context.
+ *
+ * \return          \c 0 on success.
+ * \return          An \c MBEDTLS_ERR_ECP_XXX error code on failure.
+ * \return          #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
  *                  operations was reached: see \c mbedtls_ecp_set_max_ops().
  */
 int mbedtls_ecdh_make_params( mbedtls_ecdh_context *ctx, size_t *olen,
@@ -145,46 +176,67 @@
                       void *p_rng );
 
 /**
- * \brief           Parse and procress a TLS ServerKeyExhange payload.
- *                  (First function used by a TLS client for ECDHE.)
+ * \brief           This function parses and processes a TLS ServerKeyExhange
+ *                  payload.
  *
- * \param ctx       ECDH context
- * \param buf       pointer to start of input buffer
- * \param end       one past end of buffer
+ *                  This is the first function used by a TLS client for ECDHE
+ *                  ciphersuites.
  *
- * \return          0 if successful, or an MBEDTLS_ERR_ECP_XXX error code
+ * \see             ecp.h
+ *
+ * \param ctx       The ECDH context.
+ * \param buf       The pointer to the start of the input buffer.
+ * \param end       The address for one Byte past the end of the buffer.
+ *
+ * \return          \c 0 on success.
+ * \return          An \c MBEDTLS_ERR_ECP_XXX error code on failure.
+ *
  */
 int mbedtls_ecdh_read_params( mbedtls_ecdh_context *ctx,
                       const unsigned char **buf, const unsigned char *end );
 
 /**
- * \brief           Setup an ECDH context from an EC key.
- *                  (Used by clients and servers in place of the
- *                  ServerKeyEchange for static ECDH: import ECDH parameters
- *                  from a certificate's EC key information.)
+ * \brief           This function sets up an ECDH context from an EC key.
  *
- * \param ctx       ECDH context to set
- * \param key       EC key to use
- * \param side      Is it our key (1) or the peer's key (0) ?
+ *                  It is used by clients and servers in place of the
+ *                  ServerKeyEchange for static ECDH, and imports ECDH
+ *                  parameters from the EC key information of a certificate.
  *
- * \return          0 if successful, or an MBEDTLS_ERR_ECP_XXX error code
+ * \see             ecp.h
+ *
+ * \param ctx       The ECDH context to set up.
+ * \param key       The EC key to use.
+ * \param side      Defines the source of the key: 1: Our key, or
+ *                  0: The key of the peer.
+ *
+ * \return          \c 0 on success.
+ * \return          An \c MBEDTLS_ERR_ECP_XXX error code on failure.
+ * \return          #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
+ *                  operations was reached: see \c mbedtls_ecp_set_max_ops().
+ *
  */
 int mbedtls_ecdh_get_params( mbedtls_ecdh_context *ctx, const mbedtls_ecp_keypair *key,
                      mbedtls_ecdh_side side );
 
 /**
- * \brief           Generate a public key and a TLS ClientKeyExchange payload.
- *                  (Second function used by a TLS client for ECDH(E).)
+ * \brief           This function generates a public key and a TLS
+ *                  ClientKeyExchange payload.
  *
- * \param ctx       ECDH context
- * \param olen      number of bytes actually written
- * \param buf       destination buffer
- * \param blen      size of destination buffer
- * \param f_rng     RNG function
- * \param p_rng     RNG parameter
+ *                  This is the second function used by a TLS client for ECDH(E)
+ *                  ciphersuites.
  *
- * \return          0 if successful, or an MBEDTLS_ERR_ECP_XXX error code
- *                  MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
+ * \see             ecp.h
+ *
+ * \param ctx       The ECDH context.
+ * \param olen      The number of Bytes written.
+ * \param buf       The destination buffer.
+ * \param blen      The size of the destination buffer.
+ * \param f_rng     The RNG function.
+ * \param p_rng     The RNG context.
+ *
+ * \return          \c 0 on success.
+ * \return          An \c MBEDTLS_ERR_ECP_XXX error code on failure.
+ * \return          #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
  *                  operations was reached: see \c mbedtls_ecp_set_max_ops().
  */
 int mbedtls_ecdh_make_public( mbedtls_ecdh_context *ctx, size_t *olen,
@@ -193,31 +245,46 @@
                       void *p_rng );
 
 /**
- * \brief           Parse and process a TLS ClientKeyExchange payload.
- *                  (Second function used by a TLS server for ECDH(E).)
+ * \brief       This function parses and processes a TLS ClientKeyExchange
+ *              payload.
  *
- * \param ctx       ECDH context
- * \param buf       start of input buffer
- * \param blen      length of input buffer
+ *              This is the second function used by a TLS server for ECDH(E)
+ *              ciphersuites.
  *
- * \return          0 if successful, or an MBEDTLS_ERR_ECP_XXX error code
+ * \see         ecp.h
+ *
+ * \param ctx   The ECDH context.
+ * \param buf   The start of the input buffer.
+ * \param blen  The length of the input buffer.
+ *
+ * \return      \c 0 on success.
+ * \return      An \c MBEDTLS_ERR_ECP_XXX error code on failure.
  */
 int mbedtls_ecdh_read_public( mbedtls_ecdh_context *ctx,
                       const unsigned char *buf, size_t blen );
 
 /**
- * \brief           Derive and export the shared secret.
- *                  (Last function used by both TLS client en servers.)
+ * \brief           This function derives and exports the shared secret.
  *
- * \param ctx       ECDH context
- * \param olen      number of bytes written
- * \param buf       destination buffer
- * \param blen      buffer length
- * \param f_rng     RNG function, see notes for \c mbedtls_ecdh_compute_shared()
- * \param p_rng     RNG parameter
+ *                  This is the last function used by both TLS client
+ *                  and servers.
  *
- * \return          0 if successful, or an MBEDTLS_ERR_ECP_XXX error code
- *                  MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
+ * \note            If \p f_rng is not NULL, it is used to implement
+ *                  countermeasures against side-channel attacks.
+ *                  For more information, see mbedtls_ecp_mul().
+ *
+ * \see             ecp.h
+ *
+ * \param ctx       The ECDH context.
+ * \param olen      The number of Bytes written.
+ * \param buf       The destination buffer.
+ * \param blen      The length of the destination buffer.
+ * \param f_rng     The RNG function.
+ * \param p_rng     The RNG context.
+ *
+ * \return          \c 0 on success.
+ * \return          An \c MBEDTLS_ERR_ECP_XXX error code on failure.
+ * \return          #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
  *                  operations was reached: see \c mbedtls_ecp_set_max_ops().
  */
 int mbedtls_ecdh_calc_secret( mbedtls_ecdh_context *ctx, size_t *olen,
@@ -227,16 +294,16 @@
 
 #if defined(MBEDTLS_ECP_RESTARTABLE)
 /**
- * \brief           Enable restartable EC computations for this context.
- *                  (Default: disabled.)
+ * \brief           This function enables restartable EC computations for this
+ *                  context.  (Default: disabled.)
  *
- * \sa              \c mbedtls_ecp_set_max_ops()
+ * \see             \c mbedtls_ecp_set_max_ops()
  *
  * \note            It is not possible to safely disable restartable
  *                  computations once enabled, except by free-ing the context,
  *                  which cancels possible in-progress operations.
  *
- * \param ctx       ECDH context
+ * \param ctx       The ECDH context.
  */
 void mbedtls_ecdh_enable_restart( mbedtls_ecdh_context *ctx );
 #endif /* MBEDTLS_ECP_RESTARTABLE */