diff --git a/docs/architecture/testing/driver-interface-test-strategy.md b/docs/architecture/testing/driver-interface-test-strategy.md
index d6769da..62ec3b8 100644
--- a/docs/architecture/testing/driver-interface-test-strategy.md
+++ b/docs/architecture/testing/driver-interface-test-strategy.md
@@ -101,15 +101,3 @@
 * Run the full driver validation test suite (which does not yet exist).
 
 A PKCS#11 driver would be a good candidate. It would be useful as part of our product offering.
-
-## Accelerator driver interface
-
-The accelerator driver interface is defined by [`psa/crypto_accel_driver.h`](../../../include/psa/crypto_accel_driver.h).
-
-TODO
-
-## Entropy driver interface
-
-The entropy driver interface is defined by [`psa/crypto_entropy_driver.h`](../../../include/psa/crypto_entropy_driver.h).
-
-TODO
diff --git a/include/psa/crypto_accel_driver.h b/include/psa/crypto_accel_driver.h
deleted file mode 100644
index 4488ea8..0000000
--- a/include/psa/crypto_accel_driver.h
+++ /dev/null
@@ -1,823 +0,0 @@
-/**
- * \file psa/crypto_accel_driver.h
- * \brief PSA cryptography accelerator driver module
- *
- * This header declares types and function signatures for cryptography
- * drivers that access key material directly. This is meant for
- * on-chip cryptography accelerators.
- *
- * This file is part of the PSA Crypto Driver Model, containing functions for
- * driver developers to implement to enable hardware to be called in a
- * standardized way by a PSA Cryptographic API implementation. The functions
- * comprising the driver model, which driver authors implement, are not
- * intended to be called by application developers.
- */
-
-/*
- *  Copyright The Mbed TLS Contributors
- *  SPDX-License-Identifier: Apache-2.0
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may
- *  not use this file except in compliance with the License.
- *  You may obtain a copy of the License at
- *
- *  http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software
- *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
- *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- *  See the License for the specific language governing permissions and
- *  limitations under the License.
- */
-#ifndef PSA_CRYPTO_ACCEL_DRIVER_H
-#define PSA_CRYPTO_ACCEL_DRIVER_H
-
-#include "crypto_driver_common.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/** \defgroup driver_digest Hardware-Accelerated Message Digests
- *
- * Generation and authentication of Message Digests (aka hashes) must be done
- * in parts using the following sequence:
- * - `psa_drv_hash_setup_t`
- * - `psa_drv_hash_update_t`
- * - `psa_drv_hash_update_t`
- * - ...
- * - `psa_drv_hash_finish_t`
- *
- * If a previously started Message Digest operation needs to be terminated
- * before the `psa_drv_hash_finish_t` operation is complete, it should be aborted
- * by the `psa_drv_hash_abort_t`. Failure to do so may result in allocated
- * resources not being freed or in other undefined behavior.
- */
-/**@{*/
-
-/** \brief The hardware-specific hash context structure
- *
- * The contents of this structure are implementation dependent and are
- * therefore not described here
- */
-typedef struct psa_drv_hash_context_s psa_drv_hash_context_t;
-
-/** \brief The function prototype for the start operation of a hash (message
- * digest) operation
- *
- *  Functions that implement this prototype should be named in the following
- * convention:
- * ~~~~~~~~~~~~~{.c}
- * psa_drv_hash_<ALGO>_setup
- * ~~~~~~~~~~~~~
- * Where `ALGO` is the name of the underlying hash function
- *
- * \param[in,out] p_context     A structure that will contain the
- * hardware-specific hash context
- *
- * \retval #PSA_SUCCESS     Success.
- */
-typedef psa_status_t (*psa_drv_hash_setup_t)(psa_drv_hash_context_t *p_context);
-
-/** \brief The function prototype for the update operation of a hash (message
- * digest) operation
- *
- * Functions that implement this prototype should be named in the following
- * convention:
- * ~~~~~~~~~~~~~{.c}
- * psa_drv_hash_<ALGO>_update
- * ~~~~~~~~~~~~~
- * Where `ALGO` is the name of the underlying algorithm
- *
- * \param[in,out] p_context     A hardware-specific structure for the
- *                              previously-established hash operation to be
- *                              continued
- * \param[in] p_input           A buffer containing the message to be appended
- *                              to the hash operation
- * \param[in] input_length      The size in bytes of the input message buffer
- */
-typedef psa_status_t (*psa_drv_hash_update_t)(psa_drv_hash_context_t *p_context,
-                                              const uint8_t *p_input,
-                                              size_t input_length);
-
-/** \brief  The function prototype for the finish operation of a hash (message
- * digest) operation
- *
- * Functions that implement this prototype should be named in the following
- * convention:
- * ~~~~~~~~~~~~~{.c}
- * psa_drv_hash_<ALGO>_finish
- * ~~~~~~~~~~~~~
- * Where `ALGO` is the name of the underlying algorithm
- *
- * \param[in,out] p_context     A hardware-specific structure for the
- *                              previously started hash operation to be
- *                              fiinished
- * \param[out] p_output         A buffer where the generated digest will be
- *                              placed
- * \param[in] output_size       The size in bytes of the buffer that has been
- *                              allocated for the `p_output` buffer
- * \param[out] p_output_length  The number of bytes placed in `p_output` after
- *                              success
- *
- * \retval #PSA_SUCCESS
- *          Success.
- */
-typedef psa_status_t (*psa_drv_hash_finish_t)(psa_drv_hash_context_t *p_context,
-                                              uint8_t *p_output,
-                                              size_t output_size,
-                                              size_t *p_output_length);
-
-/** \brief The function prototype for the abort operation of a hash (message
- * digest) operation
- *
- * Functions that implement this prototype should be named in the following
- * convention:
- * ~~~~~~~~~~~~~{.c}
- * psa_drv_hash_<ALGO>_abort
- * ~~~~~~~~~~~~~
- * Where `ALGO` is the name of the underlying algorithm
- *
- * \param[in,out] p_context A hardware-specific structure for the previously
- *                          started hash operation to be aborted
- */
-typedef void (*psa_drv_hash_abort_t)(psa_drv_hash_context_t *p_context);
-
-/**@}*/
-
-/** \defgroup accel_mac Hardware-Accelerated Message Authentication Code
- * Generation and authentication of Message Authentication Codes (MACs) using
- * cryptographic accelerators can be done either as a single function call (via the
- * `psa_drv_accel_mac_generate_t` or `psa_drv_accel_mac_verify_t`
- * functions), or in parts using the following sequence:
- * - `psa_drv_accel_mac_setup_t`
- * - `psa_drv_accel_mac_update_t`
- * - `psa_drv_accel_mac_update_t`
- * - ...
- * - `psa_drv_accel_mac_finish_t` or `psa_drv_accel_mac_finish_verify_t`
- *
- * If a previously started MAC operation needs to be terminated, it
- * should be done so by the `psa_drv_accel_mac_abort_t`. Failure to do so may
- * result in allocated resources not being freed or in other undefined
- * behavior.
- *
- */
-/**@{*/
-
-/** \brief The hardware-accelerator-specific MAC context structure
- *
- * The contents of this structure are implementation dependent and are
- * therefore not described here.
- */
-typedef struct psa_drv_accel_mac_context_s psa_drv_accel_mac_context_t;
-
-/** \brief The function prototype for the setup operation of a
- * hardware-accelerated MAC operation
- *
- *  Functions that implement this prototype should be named in the following
- * convention:
- * ~~~~~~~~~~~~~{.c}
- * psa_drv_accel_mac_<ALGO>_<MAC_VARIANT>_setup
- * ~~~~~~~~~~~~~
- * Where `ALGO` is the name of the underlying primitive, and `MAC_VARIANT`
- * is the specific variant of a MAC operation (such as HMAC or CMAC)
- *
- * \param[in,out] p_context     A structure that will contain the
- *                              hardware-specific MAC context
- * \param[in] p_key             A buffer containing the cleartext key material
- *                              to be used in the operation
- * \param[in] key_length        The size in bytes of the key material
- *
- * \retval  #PSA_SUCCESS
- *          Success.
- */
-typedef psa_status_t (*psa_drv_accel_mac_setup_t)(psa_drv_accel_mac_context_t *p_context,
-                                                  const uint8_t *p_key,
-                                                  size_t key_length);
-
-/** \brief The function prototype for the update operation of a
- * hardware-accelerated MAC operation
- *
- * Functions that implement this prototype should be named in the following
- * convention:
- * ~~~~~~~~~~~~~{.c}
- * psa_drv_accel_mac_<ALGO>_<MAC_VARIANT>_update
- * ~~~~~~~~~~~~~
- * Where `ALGO` is the name of the underlying algorithm, and `MAC_VARIANT`
- * is the specific variant of a MAC operation (such as HMAC or CMAC)
- *
- * \param[in,out] p_context     A hardware-specific structure for the
- *                              previously-established MAC operation to be
- *                              continued
- * \param[in] p_input           A buffer containing the message to be appended
- *                              to the MAC operation
- * \param[in] input_length      The size in bytes of the input message buffer
- */
-typedef psa_status_t (*psa_drv_accel_mac_update_t)(psa_drv_accel_mac_context_t *p_context,
-                                                   const uint8_t *p_input,
-                                                   size_t input_length);
-
-/** \brief  The function prototype for the finish operation of a
- * hardware-accelerated MAC operation
- *
- * Functions that implement this prototype should be named in the following
- *  convention:
- * ~~~~~~~~~~~~~{.c}
- * psa_drv_accel_mac_<ALGO>_<MAC_VARIANT>_finish
- * ~~~~~~~~~~~~~
- * Where `ALGO` is the name of the underlying algorithm, and `MAC_VARIANT` is
- * the specific variant of a MAC operation (such as HMAC or CMAC)
- *
- * \param[in,out] p_context     A hardware-specific structure for the
- *                              previously started MAC operation to be
- *                              finished
- * \param[out] p_mac            A buffer where the generated MAC will be placed
- * \param[in] mac_length        The size in bytes of the buffer that has been
- *                              allocated for the `p_mac` buffer
- *
- * \retval #PSA_SUCCESS
- *          Success.
- */
-typedef psa_status_t (*psa_drv_accel_mac_finish_t)(psa_drv_accel_mac_context_t *p_context,
-                                                   uint8_t *p_mac,
-                                                   size_t mac_length);
-
-/** \brief The function prototype for the finish and verify operation of a
- * hardware-accelerated MAC operation
- *
- * Functions that implement this prototype should be named in the following
- * convention:
- * ~~~~~~~~~~~~~{.c}
- * psa_drv_accel_mac_<ALGO>_<MAC_VARIANT>_finish_verify
- * ~~~~~~~~~~~~~
- * Where `ALGO` is the name of the underlying algorithm, and `MAC_VARIANT` is
- * the specific variant of a MAC operation (such as HMAC or CMAC)
- *
- * \param[in,out] p_context     A hardware-specific structure for the
- *                              previously started MAC operation to be
- *                              verified and finished
- * \param[in] p_mac             A buffer containing the MAC that will be used
- *                              for verification
- * \param[in] mac_length        The size in bytes of the data in the `p_mac`
- *                              buffer
- *
- * \retval #PSA_SUCCESS
- *          The operation completed successfully and the comparison matched
- */
-typedef psa_status_t (*psa_drv_accel_mac_finish_verify_t)(psa_drv_accel_mac_context_t *p_context,
-                                                          const uint8_t *p_mac,
-                                                          size_t mac_length);
-
-/** \brief The function prototype for the abort operation for a previously
- * started hardware-accelerated MAC operation
- *
- * Functions that implement this prototype should be named in the following
- * convention:
- * ~~~~~~~~~~~~~{.c}
- * psa_drv_accel_mac_<ALGO>_<MAC_VARIANT>_abort
- * ~~~~~~~~~~~~~
- * Where `ALGO` is the name of the underlying algorithm, and `MAC_VARIANT` is
- * the specific variant of a MAC operation (such as HMAC or CMAC)
- *
- * \param[in,out] p_context     A hardware-specific structure for the
- *                              previously started MAC operation to be
- *                              aborted
- *
- */
-typedef psa_status_t (*psa_drv_accel_mac_abort_t)(psa_drv_accel_mac_context_t *p_context);
-
-/** \brief The function prototype for the one-shot operation of a
- * hardware-accelerated MAC operation
- *
- * Functions that implement this prototype should be named in the following
- * convention:
- * ~~~~~~~~~~~~~{.c}
- * psa_drv_accel_mac_<ALGO>_<MAC_VARIANT>
- * ~~~~~~~~~~~~~
- * Where `ALGO` is the name of the underlying algorithm, and `MAC_VARIANT` is
- * the specific variant of a MAC operation (such as HMAC or CMAC)
- *
- * \param[in] p_input        A buffer containing the data to be MACed
- * \param[in] input_length   The length in bytes of the `p_input` data
- * \param[in] p_key          A buffer containing the key material to be used
- *                           for the MAC operation
- * \param[in] key_length     The length in bytes of the `p_key` data
- * \param[in] alg            The algorithm to be performed
- * \param[out] p_mac         The buffer where the resulting MAC will be placed
- *                           upon success
- * \param[in] mac_length     The length in bytes of the `p_mac` buffer
- */
-typedef psa_status_t (*psa_drv_accel_mac_t)(const uint8_t *p_input,
-                                            size_t input_length,
-                                            const uint8_t *p_key,
-                                            size_t key_length,
-                                            psa_algorithm_t alg,
-                                            uint8_t *p_mac,
-                                            size_t mac_length);
-
-/** \brief The function prototype for the one-shot hardware-accelerated MAC
- * Verify operation
- *
- * Functions that implement this prototype should be named in the following
- * convention:
- * ~~~~~~~~~~~~~{.c}
- * psa_drv_accel_mac_<ALGO>_<MAC_VARIANT>_verify
- * ~~~~~~~~~~~~~
- * Where `ALGO` is the name of the underlying algorithm, and `MAC_VARIANT` is
- * the specific variant of a MAC operation (such as HMAC or CMAC)
- *
- * \param[in] p_input        A buffer containing the data to be MACed
- * \param[in] input_length   The length in bytes of the `p_input` data
- * \param[in] p_key          A buffer containing the key material to be used
- *                           for the MAC operation
- * \param[in] key_length     The length in bytes of the `p_key` data
- * \param[in] alg            The algorithm to be performed
- * \param[in] p_mac          The MAC data to be compared
- * \param[in] mac_length     The length in bytes of the `p_mac` buffer
- *
- * \retval #PSA_SUCCESS
- *  The operation completed successfully and the comparison matched
- */
-typedef psa_status_t (*psa_drv_accel_mac_verify_t)(const uint8_t *p_input,
-                                                   size_t input_length,
-                                                   const uint8_t *p_key,
-                                                   size_t key_length,
-                                                   psa_algorithm_t alg,
-                                                   const uint8_t *p_mac,
-                                                   size_t mac_length);
-/**@}*/
-
-/** \defgroup accel_cipher Hardware-Accelerated Block Ciphers
- * Encryption and Decryption using hardware-acceleration in block modes other
- * than ECB must be done in multiple parts, using the following flow:
- * - `psa_drv_accel_ciphersetup_t`
- * - `psa_drv_accel_cipher_set_iv_t` (optional depending upon block mode)
- * - `psa_drv_accel_cipher_update_t`
- * - `psa_drv_accel_cipher_update_t`
- * - ...
- * - `psa_drv_accel_cipher_finish_t`
- *
- * If a previously started hardware-accelerated Cipher operation needs to be
- * terminated, it should be done so by the `psa_drv_accel_cipher_abort_t`.
- * Failure to do so may result in allocated resources not being freed or in
- * other undefined behavior.
- */
-/**@{*/
-
-/** \brief The hardware-accelerator-specific cipher context structure
- *
- * The contents of this structure are implementation dependent and are
- * therefore not described here.
- */
-typedef struct psa_drv_accel_cipher_context_s psa_drv_accel_cipher_context_t;
-
-/** \brief The function prototype for the setup operation of
- * hardware-accelerated block cipher operations.
- *  Functions that implement this prototype should be named in the following
- * conventions:
- * ~~~~~~~~~~~~~{.c}
- * psa_drv_accel_cipher_setup_<CIPHER_NAME>_<MODE>
- * ~~~~~~~~~~~~~
- * Where
- * - `CIPHER_NAME` is the name of the underlying block cipher (i.e. AES or DES)
- * - `MODE` is the block mode of the cipher operation (i.e. CBC or CTR)
- *
- * For stream ciphers:
- * ~~~~~~~~~~~~~{.c}
- * psa_drv_accel_cipher_setup_<CIPHER_NAME>
- * ~~~~~~~~~~~~~
- * Where `CIPHER_NAME` is the name of a stream cipher (i.e. RC4)
- *
- * \param[in,out] p_context     A structure that will contain the
- *                              hardware-specific cipher context
- * \param[in] direction         Indicates if the operation is an encrypt or a
- *                              decrypt
- * \param[in] p_key_data        A buffer containing the cleartext key material
- *                              to be used in the operation
- * \param[in] key_data_size     The size in bytes of the key material
- *
- * \retval #PSA_SUCCESS
- */
-typedef psa_status_t (*psa_drv_accel_cipher_setup_t)(psa_drv_accel_cipher_context_t *p_context,
-                                                     psa_encrypt_or_decrypt_t direction,
-                                                     const uint8_t *p_key_data,
-                                                     size_t key_data_size);
-
-/** \brief The function prototype for the set initialization vector operation
- * of hardware-accelerated block cipher operations
- * Functions that implement this prototype should be named in the following
- * convention:
- * ~~~~~~~~~~~~~{.c}
- * psa_drv_accel_cipher_set_iv_<CIPHER_NAME>_<MODE>
- * ~~~~~~~~~~~~~
- * Where
- * - `CIPHER_NAME` is the name of the underlying block cipher (i.e. AES or DES)
- * - `MODE` is the block mode of the cipher operation (i.e. CBC or CTR)
- *
- * \param[in,out] p_context     A structure that contains the previously setup
- *                              hardware-specific cipher context
- * \param[in] p_iv              A buffer containing the initialization vecotr
- * \param[in] iv_length         The size in bytes of the contents of `p_iv`
- *
- * \retval #PSA_SUCCESS
- */
-typedef psa_status_t (*psa_drv_accel_cipher_set_iv_t)(psa_drv_accel_cipher_context_t *p_context,
-                                                      const uint8_t *p_iv,
-                                                      size_t iv_length);
-
-/** \brief The function prototype for the update operation of
- * hardware-accelerated block cipher operations.
- *
- *  Functions that implement this prototype should be named in the following
- * convention:
- * ~~~~~~~~~~~~~{.c}
- * psa_drv_accel_cipher_update_<CIPHER_NAME>_<MODE>
- * ~~~~~~~~~~~~~
- * Where
- * - `CIPHER_NAME` is the name of the underlying block cipher (i.e. AES or DES)
- * - `MODE` is the block mode of the cipher operation (i.e. CBC or CTR)
- *
- * \param[in,out] p_context         A hardware-specific structure for the
- *                                  previously started cipher operation
- * \param[in] p_input               A buffer containing the data to be
- *                                  encrypted or decrypted
- * \param[in] input_size            The size in bytes of the `p_input` buffer
- * \param[out] p_output             A caller-allocated buffer where the
- *                                  generated output will be placed
- * \param[in] output_size           The size in bytes of the `p_output` buffer
- * \param[out] p_output_length      After completion, will contain the number
- *                                  of bytes placed in the `p_output` buffer
- *
- * \retval #PSA_SUCCESS
- */
-typedef psa_status_t (*psa_drv_accel_cipher_update_t)(psa_drv_accel_cipher_context_t *p_context,
-                                                      const uint8_t *p_input,
-                                                      size_t input_size,
-                                                      uint8_t *p_output,
-                                                      size_t output_size,
-                                                      size_t *p_output_length);
-
-/** \brief The function prototype for the finish operation of
- * hardware-accelerated block cipher operations.
- *
- *  Functions that implement this prototype should be named in the following
- * convention:
- * ~~~~~~~~~~~~~{.c}
- * psa_drv_accel_cipher_finish_<CIPHER_NAME>_<MODE>
- * ~~~~~~~~~~~~~
- * Where
- * - `CIPHER_NAME` is the name of the underlying block cipher (i.e. AES or DES)
- * - `MODE` is the block mode of the cipher operation (i.e. CBC or CTR)
- *
- * \param[in,out] p_context     A hardware-specific structure for the
- *                              previously started cipher operation
- * \param[out] p_output         A caller-allocated buffer where the generated
- *                              output will be placed
- * \param[in] output_size       The size in bytes of the `p_output` buffer
- * \param[out] p_output_length  After completion, will contain the number of
- *                              bytes placed in the `p_output` buffer
- *
- * \retval #PSA_SUCCESS
- */
-typedef psa_status_t (*psa_drv_accel_cipher_finish_t)(psa_drv_accel_cipher_context_t *p_context,
-                                                      uint8_t *p_output,
-                                                      size_t output_size,
-                                                      size_t *p_output_length);
-
-/** \brief The function prototype for the abort operation of
- * hardware-accelerated block cipher operations.
- *
- *  Functions that implement the following prototype should be named in the
- * following convention:
- * ~~~~~~~~~~~~~{.c}
- * psa_drv_accel_cipher_abort_<CIPHER_NAME>_<MODE>
- * ~~~~~~~~~~~~~
- * Where
- * - `CIPHER_NAME` is the name of the underlying block cipher (i.e. AES or DES)
- * - `MODE` is the block mode of the cipher operation (i.e. CBC or CTR)
- *
- * \param[in,out] p_context     A hardware-specific structure for the
- *                              previously started cipher operation
- *
- * \retval #PSA_SUCCESS
- */
-typedef psa_status_t (*psa_drv_accel_cipher_abort_t)(psa_drv_accel_cipher_context_t *p_context);
-
-/**@}*/
-
-/** \defgroup accel_aead Hardware-Accelerated Authenticated Encryption with Additional Data
- *
- * Hardware-accelerated Authenticated Encryption with Additional Data (AEAD)
- * operations must be done in one function call. While this creates a burden
- * for implementers as there must be sufficient space in memory for the entire
- * message, it prevents decrypted data from being made available before the
- * authentication operation is complete and the data is known to be authentic.
- */
-/**@{*/
-
-/** \brief The function prototype for the hardware-accelerated authenticated
- * encryption operation.
- *
- * Functions that implement this prototype should be named in the following
- * convention:
- * ~~~~~~~~~~~~~{.c}
- * psa_drv_accel_aead_<ALGO>_encrypt
- * ~~~~~~~~~~~~~
- * Where `ALGO` is the name of the AEAD algorithm
- *
- * \param[in] p_key                     A pointer to the key material
- * \param[in] key_length                The size in bytes of the key material
- * \param[in] alg                       The AEAD algorithm to compute
- *                                      (\c PSA_ALG_XXX value such that
- *                                      #PSA_ALG_IS_AEAD(`alg`) is true)
- * \param[in] nonce                     Nonce or IV to use
- * \param[in] nonce_length              Size of the `nonce` buffer in bytes
- * \param[in] additional_data           Additional data that will be MACed
- *                                      but not encrypted.
- * \param[in] additional_data_length    Size of `additional_data` in bytes
- * \param[in] plaintext                 Data that will be MACed and
- *                                      encrypted.
- * \param[in] plaintext_length          Size of `plaintext` in bytes
- * \param[out] ciphertext               Output buffer for the authenticated and
- *                                      encrypted data. The additional data is
- *                                      not part of this output. For algorithms
- *                                      where the encrypted data and the
- *                                      authentication tag are defined as
- *                                      separate outputs, the authentication
- *                                      tag is appended to the encrypted data.
- * \param[in] ciphertext_size           Size of the `ciphertext` buffer in
- *                                      bytes
- *                                      This must be at least
- *                                      #PSA_AEAD_ENCRYPT_OUTPUT_SIZE(`alg`,
- *                                      `plaintext_length`).
- * \param[out] ciphertext_length        On success, the size of the output in
- *                                      the `ciphertext` buffer
- *
- * \retval #PSA_SUCCESS
- *
- */
-typedef psa_status_t (*psa_drv_accel_aead_encrypt_t)(const uint8_t *p_key,
-                                                     size_t key_length,
-                                                     psa_algorithm_t alg,
-                                                     const uint8_t *nonce,
-                                                     size_t nonce_length,
-                                                     const uint8_t *additional_data,
-                                                     size_t additional_data_length,
-                                                     const uint8_t *plaintext,
-                                                     size_t plaintext_length,
-                                                     uint8_t *ciphertext,
-                                                     size_t ciphertext_size,
-                                                     size_t *ciphertext_length);
-
-/** \brief The function prototype for the hardware-accelerated authenticated
- * decryption operation.
- *
- * Functions that implement this prototype should be named in the following
- * convention:
- * ~~~~~~~~~~~~~{.c}
- * psa_drv_accel_aead_<ALGO>_decrypt
- * ~~~~~~~~~~~~~
- * Where `ALGO` is the name of the AEAD algorithm
- * \param[in] p_key                     A pointer to the key material
- * \param[in] key_length                The size in bytes of the key material
- * \param[in] alg                       The AEAD algorithm to compute
- *                                      (\c PSA_ALG_XXX value such that
- *                                      #PSA_ALG_IS_AEAD(`alg`) is true)
- * \param[in] nonce                     Nonce or IV to use
- * \param[in] nonce_length              Size of the `nonce` buffer in bytes
- * \param[in] additional_data           Additional data that has been MACed
- *                                      but not encrypted
- * \param[in] additional_data_length    Size of `additional_data` in bytes
- * \param[in] ciphertext                Data that has been MACed and
- *                                      encrypted
- *                                      For algorithms where the encrypted data
- *                                      and the authentication tag are defined
- *                                      as separate inputs, the buffer must
- *                                      contain the encrypted data followed by
- *                                      the authentication tag.
- * \param[in] ciphertext_length         Size of `ciphertext` in bytes
- * \param[out] plaintext                Output buffer for the decrypted data
- * \param[in] plaintext_size            Size of the `plaintext` buffer in
- *                                      bytes
- *                                      This must be at least
- *                                      #PSA_AEAD_DECRYPT_OUTPUT_SIZE(`alg`,
- *                                      `ciphertext_length`).
- * \param[out] plaintext_length         On success, the size of the output
- *                                      in the \b plaintext buffer
- *
- * \retval #PSA_SUCCESS
- *         Success.
- */
-typedef psa_status_t (*psa_drv_accel_aead_decrypt_t)(const uint8_t *p_key,
-                                                     size_t key_length,
-                                                     psa_algorithm_t alg,
-                                                     const uint8_t *nonce,
-                                                     size_t nonce_length,
-                                                     const uint8_t *additional_data,
-                                                     size_t additional_data_length,
-                                                     const uint8_t *ciphertext,
-                                                     size_t ciphertext_length,
-                                                     uint8_t *plaintext,
-                                                     size_t plaintext_size,
-                                                     size_t *plaintext_length);
-
-/**@}*/
-
-/** \defgroup accel_asymmetric Hardware-Accelerated Asymmetric Cryptography
- *
- * Since the amount of data that can (or should) be encrypted or signed using
- * asymmetric keys is limited by the key size, hardware-accelerated asymmetric
- * key operations must be done in single function calls.
- */
-/**@{*/
-
-
-/**
- * \brief The function prototype for the hardware-accelerated asymmetric sign
- * operation.
- *
- * Functions that implement this prototype should be named in the following
- * convention:
- * ~~~~~~~~~~~~~{.c}
- * psa_drv_accel_asymmetric_<ALGO>_sign
- * ~~~~~~~~~~~~~
- * Where `ALGO` is the name of the signing algorithm
- *
- * This function supports any asymmetric-key output from psa_export_key() as
- * the buffer in \p p_key. Refer to the documentation of \ref
- * psa_export_key() for the formats.
- *
- * \param[in] p_key                 A buffer containing the private key
- *                                  material
- * \param[in] key_size              The size in bytes of the `p_key` data
- * \param[in] alg                   A signature algorithm that is compatible
- *                                  with the type of `p_key`
- * \param[in] p_hash                The hash or message to sign
- * \param[in] hash_length           Size of the `p_hash` buffer in bytes
- * \param[out] p_signature          Buffer where the signature is to be written
- * \param[in] signature_size        Size of the `p_signature` buffer in bytes
- * \param[out] p_signature_length   On success, the number of bytes
- *                                  that make up the returned signature value
- *
- * \retval #PSA_SUCCESS
- */
-typedef psa_status_t (*psa_drv_accel_asymmetric_sign_t)(const uint8_t *p_key,
-                                                        size_t key_size,
-                                                        psa_algorithm_t alg,
-                                                        psa_key_type_t key_type,
-                                                        const uint8_t *p_hash,
-                                                        size_t hash_length,
-                                                        uint8_t *p_signature,
-                                                        size_t signature_size,
-                                                        size_t *p_signature_length);
-
-/**
- * \brief The function prototype for the hardware-accelerated signature verify
- * operation
- *
- * Functions that implement this prototype should be named in the following
- * convention:
- * ~~~~~~~~~~~~~{.c}
- * psa_drv_accel_asymmetric_<ALGO>_verify
- * ~~~~~~~~~~~~~
- * Where `ALGO` is the name of the signing algorithm
- *
- * This function supports any output from \ref psa_export_public_key() as the
- * buffer in \p p_key. Refer to the documentation of \ref
- * psa_export_public_key() for the format of public keys and to the
- * documentation of \ref psa_export_key() for the format for other key types.
- *
- * \param[in] p_key             A buffer containing the public key material
- * \param[in] key_size          The size in bytes of the `p_key` data
- * \param[in] alg               A signature algorithm that is compatible with
- *                              the type of `key`
- * \param[in] p_hash            The hash or message whose signature is to be
- *                              verified
- * \param[in] hash_length       Size of the `p_hash` buffer in bytes
- * \param[in] p_signature       Buffer containing the signature to verify
- * \param[in] signature_length  Size of the `p_signature` buffer in bytes
- *
- * \retval #PSA_SUCCESS
- *         The signature is valid.
- */
-typedef psa_status_t (*psa_drv_accel_asymmetric_verify_t)(const uint8_t *p_key,
-                                                          size_t key_size,
-                                                          psa_algorithm_t alg,
-                                                          psa_key_type_t key_type,
-                                                          const uint8_t *p_hash,
-                                                          size_t hash_length,
-                                                          const uint8_t *p_signature,
-                                                          size_t signature_length);
-
-/**
- * \brief The function prototype for the hardware-accelerated asymmetric
- * encrypt operation
- *
- * Functions that implement this prototype should be named in the following
- * convention:
- * ~~~~~~~~~~~~~{.c}
- * psa_drv_accel_asymmetric_<ALGO>_encrypt
- * ~~~~~~~~~~~~~
- * Where `ALGO` is the name of the encryption algorithm
- *
- * This function supports any output from \ref psa_export_public_key() as the
- * buffer in \p p_key. Refer to the documentation of \ref
- * psa_export_public_key() for the format of public keys and to the
- * documentation of \ref psa_export_key() for the format for other key types.
- *
- * \param[in] p_key             A buffer containing the public key material
- * \param[in] key_size          The size in bytes of the `p_key` data
- * \param[in] alg               An asymmetric encryption algorithm that is
- *                              compatible with the type of `key`
- * \param[in] p_input           The message to encrypt
- * \param[in] input_length      Size of the `p_input` buffer in bytes
- * \param[in] p_salt            A salt or label, if supported by the
- *                              encryption algorithm
- *                              If the algorithm does not support a
- *                              salt, pass `NULL`
- *                              If the algorithm supports an optional
- *                              salt and you do not want to pass a salt,
- *                              pass `NULL`.
- *                              For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is
- *                              supported.
- * \param[in] salt_length       Size of the `p_salt` buffer in bytes
- *                              If `p_salt` is `NULL`, pass 0.
- * \param[out] p_output         Buffer where the encrypted message is to
- *                              be written
- * \param[in] output_size       Size of the `p_output` buffer in bytes
- * \param[out] p_output_length  On success, the number of bytes
- *                              that make up the returned output
- *
- * \retval #PSA_SUCCESS
- */
-typedef psa_status_t (*psa_drv_accel_asymmetric_encrypt_t)(const uint8_t *p_key,
-                                                           size_t key_size,
-                                                           psa_algorithm_t alg,
-                                                           psa_key_type_t key_type,
-                                                           const uint8_t *p_input,
-                                                           size_t input_length,
-                                                           const uint8_t *p_salt,
-                                                           size_t salt_length,
-                                                           uint8_t *p_output,
-                                                           size_t output_size,
-                                                           size_t *p_output_length);
-
-/**
- * \brief The function prototype for the hardware=acce;erated asymmetric
- * decrypt operation
- *
- * Functions that implement this prototype should be named in the following
- * convention:
- * ~~~~~~~~~~~~~{.c}
- * psa_drv_accel_asymmetric_<ALGO>_decrypt
- * ~~~~~~~~~~~~~
- * Where `ALGO` is the name of the encryption algorithm
- *
- * This function supports any asymmetric-key output from psa_export_key() as
- * the buffer in \p p_key. Refer to the documentation of \ref
- * psa_export_key() for the formats.
- *
- * \param[in] p_key             A buffer containing the private key material
- * \param[in] key_size          The size in bytes of the `p_key` data
- * \param[in] alg               An asymmetric encryption algorithm that is
- *                              compatible with the type of `key`
- * \param[in] p_input           The message to decrypt
- * \param[in] input_length      Size of the `p_input` buffer in bytes
- * \param[in] p_salt            A salt or label, if supported by the
- *                              encryption algorithm
- *                              If the algorithm does not support a
- *                              salt, pass `NULL`.
- *                              If the algorithm supports an optional
- *                              salt and you do not want to pass a salt,
- *                              pass `NULL`.
- *                              For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is
- *                              supported
- * \param[in] salt_length       Size of the `p_salt` buffer in bytes
- *                              If `p_salt` is `NULL`, pass 0
- * \param[out] p_output         Buffer where the decrypted message is to
- *                              be written
- * \param[in] output_size       Size of the `p_output` buffer in bytes
- * \param[out] p_output_length  On success, the number of bytes
- *                              that make up the returned output
- *
- * \retval #PSA_SUCCESS
- */
-typedef psa_status_t (*psa_drv_accel_asymmetric_decrypt_t)(const uint8_t *p_key,
-                                                           size_t key_size,
-                                                           psa_algorithm_t alg,
-                                                           psa_key_type_t key_type,
-                                                           const uint8_t *p_input,
-                                                           size_t input_length,
-                                                           const uint8_t *p_salt,
-                                                           size_t salt_length,
-                                                           uint8_t *p_output,
-                                                           size_t output_size,
-                                                           size_t *p_output_length);
-
-/**@}*/
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* PSA_CRYPTO_ACCEL_DRIVER_H */
diff --git a/include/psa/crypto_driver_common.h b/include/psa/crypto_driver_common.h
index 2ce75d2..1b6f322 100644
--- a/include/psa/crypto_driver_common.h
+++ b/include/psa/crypto_driver_common.h
@@ -5,9 +5,8 @@
  * This file contains common definitions shared by all PSA crypto drivers.
  * Do not include it directly: instead, include the header file(s) for
  * the type(s) of driver that you are implementing. For example, if
- * you are writing a driver for a chip that provides both a hardware
- * random generator and an accelerator for some cryptographic algorithms,
- * include `psa/crypto_entropy_driver.h` and `psa/crypto_accel_driver.h`.
+ * you are writing a dynamically registered driver for a secure element,
+ * include `psa/crypto_se_driver.h`.
  *
  * This file is part of the PSA Crypto Driver Model, containing functions for
  * driver developers to implement to enable hardware to be called in a
diff --git a/include/psa/crypto_entropy_driver.h b/include/psa/crypto_entropy_driver.h
deleted file mode 100644
index 9b6546e..0000000
--- a/include/psa/crypto_entropy_driver.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/**
- * \file psa/crypto_entropy_driver.h
- * \brief PSA entropy source driver module
- *
- * This header declares types and function signatures for entropy sources.
- *
- * This file is part of the PSA Crypto Driver Model, containing functions for
- * driver developers to implement to enable hardware to be called in a
- * standardized way by a PSA Cryptographic API implementation. The functions
- * comprising the driver model, which driver authors implement, are not
- * intended to be called by application developers.
- */
-
-/*
- *  Copyright The Mbed TLS Contributors
- *  SPDX-License-Identifier: Apache-2.0
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may
- *  not use this file except in compliance with the License.
- *  You may obtain a copy of the License at
- *
- *  http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software
- *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
- *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- *  See the License for the specific language governing permissions and
- *  limitations under the License.
- */
-#ifndef PSA_CRYPTO_ENTROPY_DRIVER_H
-#define PSA_CRYPTO_ENTROPY_DRIVER_H
-
-#include "crypto_driver_common.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/** \defgroup driver_rng Entropy Generation
- */
-/**@{*/
-
-/** \brief Initialize an entropy driver
- *
- *
- * \param[in,out] p_context             A hardware-specific structure
- *                                      containing any context information for
- *                                      the implementation
- *
- * \retval #PSA_SUCCESS
- */
-typedef psa_status_t (*psa_drv_entropy_init_t)(void *p_context);
-
-/** \brief Get a specified number of bits from the entropy source
- *
- * It retrives `buffer_size` bytes of data from the entropy source. The entropy
- * source will always fill the provided buffer to its full size, however, most
- * entropy sources have biases, and the actual amount of entropy contained in
- * the buffer will be less than the number of bytes.
- * The driver will return the actual number of bytes of entropy placed in the
- * buffer in `p_received_entropy_bytes`.
- * A PSA Crypto API implementation will likely feed the output of this function
- * into a Digital Random Bit Generator (DRBG), and typically has a minimum
- * amount of entropy that it needs.
- * To accomplish this, the PSA Crypto implementation should be designed to call
- * this function multiple times until it has received the required amount of
- * entropy from the entropy source.
- *
- * \param[in,out] p_context                 A hardware-specific structure
- *                                          containing any context information
- *                                          for the implementation
- * \param[out] p_buffer                     A caller-allocated buffer for the
- *                                          retrieved entropy to be placed in
- * \param[in] buffer_size                   The allocated size of `p_buffer`
- * \param[out] p_received_entropy_bits      The amount of entropy (in bits)
- *                                          actually provided in `p_buffer`
- *
- * \retval #PSA_SUCCESS
- */
-typedef psa_status_t (*psa_drv_entropy_get_bits_t)(void *p_context,
-                                                   uint8_t *p_buffer,
-                                                   uint32_t buffer_size,
-                                                   uint32_t *p_received_entropy_bits);
-
-/**
- * \brief A struct containing all of the function pointers needed to interface
- * to an entropy source
- *
- * PSA Crypto API implementations should populate instances of the table as
- * appropriate upon startup.
- *
- * If one of the functions is not implemented, it should be set to NULL.
- */
-typedef struct {
-    /** The driver-specific size of the entropy context */
-    const size_t                context_size;
-    /** Function that performs initialization for the entropy source */
-    psa_drv_entropy_init_t      p_init;
-    /** Function that performs the get_bits operation for the entropy source */
-    psa_drv_entropy_get_bits_t  p_get_bits;
-} psa_drv_entropy_t;
-/**@}*/
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* PSA_CRYPTO_ENTROPY_DRIVER_H */
diff --git a/programs/test/cpp_dummy_build.cpp b/programs/test/cpp_dummy_build.cpp
index c69cd2b..5abb46a 100644
--- a/programs/test/cpp_dummy_build.cpp
+++ b/programs/test/cpp_dummy_build.cpp
@@ -111,8 +111,6 @@
 
 #include "psa/crypto.h"
 #include "psa/crypto_se_driver.h"
-#include "psa/crypto_entropy_driver.h"
-#include "psa/crypto_accel_driver.h"
 #include "../library/psa_crypto_its.h"
 
 int main()
diff --git a/visualc/VS2010/mbedTLS.vcxproj b/visualc/VS2010/mbedTLS.vcxproj
index 0af4145..440cc11 100644
--- a/visualc/VS2010/mbedTLS.vcxproj
+++ b/visualc/VS2010/mbedTLS.vcxproj
@@ -222,11 +222,9 @@
     <ClInclude Include="..\..\include\mbedtls\x509_csr.h" />
     <ClInclude Include="..\..\include\mbedtls\xtea.h" />
     <ClInclude Include="..\..\include\psa\crypto.h" />
-    <ClInclude Include="..\..\include\psa\crypto_accel_driver.h" />
     <ClInclude Include="..\..\include\psa\crypto_compat.h" />
     <ClInclude Include="..\..\include\psa\crypto_config.h" />
     <ClInclude Include="..\..\include\psa\crypto_driver_common.h" />
-    <ClInclude Include="..\..\include\psa\crypto_entropy_driver.h" />
     <ClInclude Include="..\..\include\psa\crypto_extra.h" />
     <ClInclude Include="..\..\include\psa\crypto_platform.h" />
     <ClInclude Include="..\..\include\psa\crypto_se_driver.h" />