diff --git a/ChangeLog.d/driver-only-ecc.txt b/ChangeLog.d/driver-only-ecc.txt
index df70ca1..8878085 100644
--- a/ChangeLog.d/driver-only-ecc.txt
+++ b/ChangeLog.d/driver-only-ecc.txt
@@ -6,8 +6,10 @@
      TLS 1.2 (ECDHE-ECDSA key exchange) are not supported in those builds yet,
      as PSA does not have an API for restartable ECDH yet.
    * When all of ECDH, ECDSA and EC J-PAKE are either disabled or provided by
-     a driver, it is possible to disable MBEDTLS_ECP_C and still get support
-     for ECC keys and algorithms in PSA. See docs/driver-only-builds.txt.
+     a driver, it is possible to disable MBEDTLS_ECP_C (and MBEDTLS_BIGNUM_C
+     if not required by another module) and still get support for ECC keys and
+     algorithms in PSA, with some limitations. See docs/driver-only-builds.txt
+     for details.
 API changes
    * Mbed TLS 3.4 introduced support for omitting the built-in implementation
      of ECDSA and/or EC J-PAKE when those are provided by a driver. However,
diff --git a/docs/driver-only-builds.md b/docs/driver-only-builds.md
index 7b0d8c4..4bad2e8 100644
--- a/docs/driver-only-builds.md
+++ b/docs/driver-only-builds.md
@@ -104,33 +104,61 @@
 - the ECDH, ECDSA and EC J-PAKE algorithms;
 - key import, export, and random generation.
 
-More precisely:
-- you can enable `PSA_WANT_ALG_ECDH` without `MBEDTLS_ECDH_C` provided
-  `MBEDTLS_PSA_ACCEL_ALG_ECDH` is enabled;
-- you can enable `PSA_WANT_ALG_ECDSA` without `MBEDTLS_ECDSA_C` provided
+More precisely, if:
+- you have driver support for ECC public and using private keys (that is,
+`MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_PUBLIC_KEY` and
+`MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_BASIC` are enabled), and
+- you have driver support for all ECC curves that are enabled (that is, for
+  each `PSA_WANT_ECC_xxx` macro enabled, the corresponding
+`MBEDTLS_PSA_ACCEL_ECC_xxx` macros is enabled as well);
+
+then you can:
+- enable `PSA_WANT_ALG_ECDH` without `MBEDTLS_ECDH_C`, provided
+  `MBEDTLS_PSA_ACCEL_ALG_ECDH` is enabled
+- enable `PSA_WANT_ALG_ECDSA` without `MBEDTLS_ECDSA_C`, provided
   `MBEDTLS_PSA_ACCEL_ALG_ECDSA` is enabled;
-- you can enable `PSA_WANT_ALG_JPAKE` without `MBEDTLS_ECJPAKE_C` provided
+- enable `PSA_WANT_ALG_JPAKE` without `MBEDTLS_ECJPAKE_C`, provided
   `MBEDTLS_PSA_ACCEL_ALG_JPAKE` is enabled.
 
-In addition, if none of `MBEDTLS_ECDH_C`, `MBEDTLS_ECDSA_C`,
-`MBEDTLS_ECJPAKE_C` are enabled, you can enable:
-- `PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY`;
-- `PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_BASIC`;
-- `PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_IMPORT`;
-- `PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_EXPORT`;
-- `PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_GENERATE`;
-without `MBEDTLS_ECP_C` provided the corresponding
-`MBEDTLS_PSA_ACCEL_KEY_TYPE_xxx` are enabled.
+In addition, if:
+- none of `MBEDTLS_ECDH_C`, `MBEDTLS_ECDSA_C`, `MBEDTLS_ECJPAKE_C` are enabled
+  (see conditions above), and
+- you have driver support for all enabled ECC key pair operations - that is,
+  for each `PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_xxx` macro enabled, the
+corresponding `MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_xxx` macros is also
+enabled,
 
-[Coming soon] If `MBEDTLS_ECP_C` is disabled and `ecp.c` is fully removed (see
-"Limitations regarding fully removing `ecp.c`" below), and you're not using
-RSA or FFDH, then you can also disable `MBEDTLS_BIGNUM_C` for further code
-size saving.
+then you can also disable `MBEDTLS_ECP_C`. However, a small subset of it might
+still be included in the build, see limitations sub-section below.
 
-[Coming soon] As noted in the "Limitations regarding the selection of curves"
-section below, there is an upcoming requirement for all the required curves to
-also be accelerated in the PSA driver in order to exclude the builtin algs
-support.
+In addition, if:
+- `MBEDTLS_ECP_C` is fully removed (see limitation sub-section below), and
+- support for RSA key types and algorithms is fully disabled, and
+- support for DH key types and the FFDH algorithm is either disabled, or
+  fully provided by a driver,
+
+then you can also disable `MBEDTLS_BIGNUM_C`.
+
+In such builds, all crypto operations via the PSA Crypto API will work as
+usual, as well as the PK, X.509 and TLS modules if `MBEDTLS_USE_PSA_CRYPTO` is
+enabled, with the following exceptions:
+- direct calls to APIs from the disabled modules are not possible;
+- PK, X.509 and TLS will not support restartable ECC operations (see
+  limitation sub-section below).
+
+If you want to check at compile-time whether a certain curve is available in
+the present build of Mbed TLS, regardless of whether ECC is provided by a
+driver or built-in, you should use the following macros:
+- for code that uses only the PSA Crypto API: `PSA_WANT_ECC_xxx` from
+  `psa/crypto.h`;
+- for code that may also use non-PSA crypto APIs: `MBEDTLS_ECP_HAVE_xxx` from
+  `mbedtls/build_info.h` where xxx can take the same values as for
+`MBEDTLS_ECP_DP_xxx` macros.
+
+Note that for externally-provided drivers, the integrator is responsible for
+ensuring the appropriate `MBEDTLS_PSA_ACCEL_xxx` macros are defined. However,
+for the p256-m driver that's provided with the library, those macros are
+automatically defined when enabling `MBEDTLS_PSA_P256M_DRIVER_ENABLED`.
 
 ### Limitations regarding fully removing `ecp.c`
 
@@ -155,7 +183,7 @@
 
 ### Limitations regarding restartable / interruptible ECC operations
 
-At the moment, there is not driver support for interruptible operations
+At the moment, there is no driver support for interruptible operations
 (see `psa_sign_hash_start()` + `psa_sign_hash_complete()` etc.) so as a
 consequence these are not supported in builds without `MBEDTLS_ECDSA_C`.
 
@@ -167,18 +195,6 @@
 Again, we have plans to support this in the future but not with an established
 timeline, please let us know if you're interested.
 
-### Limitations regarding the selection of curves
-
-There is ongoing work which is trying to establish the links and constraints
-between the list of supported curves and supported algorithms both in the
-builtin and PSA sides. In particular:
-
-- #8014 ensures that the curves supported on the PSA side (`PSA_WANT_ECC_xxx`)
-  are always a superset of the builtin ones (`MBEDTLS_ECP_DP_xxx`)
-- #8016 forces builtin alg support as soon as there is at least one builtin
-  curve. In other words, in order to exclue all builtin algs, all the required
-  curves should be supported and accelerated by the PSA driver.
-
 ### Limitations regarding "mixed" builds (driver and built-in)
 
 In order for a build to be driver-only (no built-in implementation), all the
diff --git a/docs/psa-driver-example-and-guide.md b/docs/psa-driver-example-and-guide.md
index 8bda60f..d041723 100644
--- a/docs/psa-driver-example-and-guide.md
+++ b/docs/psa-driver-example-and-guide.md
@@ -146,11 +146,11 @@
     python3 scripts/config.py set MBEDTLS_PSA_P256M_DRIVER_ENABLED
     make
 
-(You need extra steps if you want to disable the built-in implementation of ECC algorithms, which includes more features than p256-m. Refer to the documentation of `MBEDTLS_PSA_P256M_DRIVER_ENABLED` for more information.)
+(You need extra steps if you want to disable the built-in implementation of ECC algorithms, which includes more features than p256-m. Refer to the documentation of `MBEDTLS_PSA_P256M_DRIVER_ENABLED` and [`driver-only-builds.md`](driver-only-builds.md) for more information.)
 
 The driver prefix for p256-m is `P256`/`p256`.
-The p256-m driver implements four entry points: `generate_key`, `key_agreement`, `sign_hash`, `verify_hash`.
-There are no entry points for `sign_message` and `verify_message`, which are not necessary for a sign-and-hash algorithm. The core still implements these functions by doing the hashes and then calling the sign/verify-hash entry points.
+The p256-m driver implements the following entry points: `"import_key"`, `"export_public_key"`, `"generate_key"`, `"key_agreement"`, `"sign_hash"`, `"verify_hash"`.
+There are no entry points for `"sign_message"` and `"verify_message"`, which are not necessary for a sign-and-hash algorithm. The core still implements these functions by doing the hashes and then calling the sign/verify-hash entry points.
 The driver entry point functions can be found in `p256m_driver_entrypoints.[hc]`. These functions act as an interface between Mbed TLS and p256-m; converting between PSA and p256-m argument formats and performing sanity checks. If the driver's status codes differ from PSA's, it is recommended to implement a status code translation function. The function `p256_to_psa_error()` converts error codes returned by p256-m into PSA error codes.
 
 The driver wrapper functions in `psa_crypto_driver_wrappers.h.jinja` for all four entry points have also been modified. The code block below shows the additions made to `psa_driver_wrapper_sign_hash()`. In adherence to the defined process, all code related to the driver call is placed within a check for `MBEDTLS_PSA_P256M_DRIVER_ENABLED`. p256-m only supports non-deterministic ECDSA using keys based on NIST P256; these constraints are enforced through checks (see the `if` statement). Checks that involve accessing key attributes, (e.g. checking key type or bits) **must** be performed in the driver wrapper. This is because this information is marked private and may not be accessed outside the library. Other checks can be performed here or in the entry point function. The status returned by the driver is propagated up the call hierarchy **unless** the driver does not support the operation (i.e. return `PSA_ERROR_NOT_SUPPORTED`). In that case the next available driver/built-in implementation is called.
diff --git a/include/mbedtls/check_config.h b/include/mbedtls/check_config.h
index 6a2f9d2..e18e9a5 100644
--- a/include/mbedtls/check_config.h
+++ b/include/mbedtls/check_config.h
@@ -125,6 +125,46 @@
 
 #endif /* MBEDTLS_PSA_CRYPTO_CONFIG || MBEDTLS_PSA_CRYPTO_C */
 
+/* Limitations on ECC key types acceleration: if we have any of `PUBLIC_KEY`,
+ * `KEY_PAIR_BASIC`, `KEY_PAIR_IMPORT`, `KEY_PAIR_EXPORT` then we must have
+ * all 4 of them.
+ */
+#if defined(MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_PUBLIC_KEY) || \
+    defined(MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_BASIC) || \
+    defined(MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_IMPORT) || \
+    defined(MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_EXPORT)
+#if !defined(MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_PUBLIC_KEY) || \
+    !defined(MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_BASIC) || \
+    !defined(MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_IMPORT) || \
+    !defined(MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_EXPORT)
+#error "Unsupported partial support for ECC key type acceleration, see docs/driver-only-builds.md"
+#endif /* not all of public, basic, import, export */
+#endif /* one of public, basic, import, export */
+
+/* Limitations on ECC curves acceleration: partial curve acceleration is only
+ * supported with crypto excluding PK, X.509 or TLS.
+ * Note: no need to check X.509 as it depends on PK. */
+#if defined(MBEDTLS_PSA_ACCEL_ECC_BRAINPOOL_P_R1_256) || \
+    defined(MBEDTLS_PSA_ACCEL_ECC_BRAINPOOL_P_R1_384) || \
+    defined(MBEDTLS_PSA_ACCEL_ECC_BRAINPOOL_P_R1_512) || \
+    defined(MBEDTLS_PSA_ACCEL_ECC_MONTGOMERY_255) || \
+    defined(MBEDTLS_PSA_ACCEL_ECC_MONTGOMERY_448) || \
+    defined(MBEDTLS_PSA_ACCEL_ECC_SECP_K1_192) || \
+    defined(MBEDTLS_PSA_ACCEL_ECC_SECP_K1_224) || \
+    defined(MBEDTLS_PSA_ACCEL_ECC_SECP_K1_256) || \
+    defined(MBEDTLS_PSA_ACCEL_ECC_SECP_R1_192) || \
+    defined(MBEDTLS_PSA_ACCEL_ECC_SECP_R1_224) || \
+    defined(MBEDTLS_PSA_ACCEL_ECC_SECP_R1_256) || \
+    defined(MBEDTLS_PSA_ACCEL_ECC_SECP_R1_384) || \
+    defined(MBEDTLS_PSA_ACCEL_ECC_SECP_R1_521)
+#if defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_CURVES)
+#if defined(MBEDTLS_PK_C) || \
+    defined(MBEDTLS_SSL_TLS_C)
+#error "Unsupported partial support for ECC curves acceleration, see docs/driver-only-builds.md"
+#endif /* modules beyond what's supported */
+#endif /* not all curves accelerated */
+#endif /* some curve accelerated */
+
 #if defined(MBEDTLS_CTR_DRBG_C) && !defined(MBEDTLS_AES_C)
 #error "MBEDTLS_CTR_DRBG_C defined, but not all prerequisites"
 #endif
diff --git a/include/mbedtls/config_adjust_legacy_from_psa.h b/include/mbedtls/config_adjust_legacy_from_psa.h
index cb2dad4..e3c2ed1 100644
--- a/include/mbedtls/config_adjust_legacy_from_psa.h
+++ b/include/mbedtls/config_adjust_legacy_from_psa.h
@@ -28,6 +28,20 @@
 #ifndef MBEDTLS_CONFIG_ADJUST_LEGACY_FROM_PSA_H
 #define MBEDTLS_CONFIG_ADJUST_LEGACY_FROM_PSA_H
 
+/* Define appropriate ACCEL macros for the p256-m driver.
+ * In the future, those should be generated from the drivers JSON description.
+ */
+#if defined(MBEDTLS_PSA_P256M_DRIVER_ENABLED)
+#define MBEDTLS_PSA_ACCEL_ECC_SECP_R1_256
+#define MBEDTLS_PSA_ACCEL_ALG_ECDSA
+#define MBEDTLS_PSA_ACCEL_ALG_ECDH
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_PUBLIC_KEY
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_BASIC
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_IMPORT
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_EXPORT
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_GENERATE
+#endif
+
 /*
  * ECC: support for a feature is controlled by a triplet or a pair:
  * (curve, key_type public/basic, alg) or (curve, key_type_<action>).
@@ -145,35 +159,40 @@
 /* ECC: key types: is acceleration complete? */
 #if defined(PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY) && \
     !defined(MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_PUBLIC_KEY)
-#define MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES
-#define MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES_BASIC
+#define MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES
+#define MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES_BASIC
 #endif
 
 #if defined(PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_BASIC) && \
     !defined(MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_BASIC)
-#define MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES
-#define MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES_BASIC
+#define MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES
+#define MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES_BASIC
 #endif
 
 #if defined(PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_IMPORT) && \
     !defined(MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_IMPORT)
-#define MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES
+#define MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES
 #endif
 
 #if defined(PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_EXPORT) && \
     !defined(MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_EXPORT)
-#define MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES
+#define MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES
 #endif
 
 #if defined(PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_GENERATE) && \
     !defined(MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_GENERATE)
-#define MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES
+#define MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES
 #endif
 
 /* Special case: we don't support cooked key derivation in drivers yet */
+#if defined(MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_DERIVE)
+#undef MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_DERIVE
+#endif
+
+/* Note: the condition is always true as DERIVE can't be accelerated yet */
 #if defined(PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE) && \
-    (1 || !defined(MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_DERIVE))
-#define MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES
+    !defined(MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_DERIVE)
+#define MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES
 #endif
 
 /* ECC: curves: enable built-ins as needed.
@@ -185,7 +204,7 @@
  */
 #if defined(PSA_WANT_ECC_BRAINPOOL_P_R1_256)
 #if !defined(MBEDTLS_PSA_ACCEL_ECC_BRAINPOOL_P_R1_256) || \
-    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES) || \
+    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES) || \
     defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_ALGS)
 #define MBEDTLS_PSA_BUILTIN_ECC_BRAINPOOL_P_R1_256 1
 #define MBEDTLS_ECP_DP_BP256R1_ENABLED
@@ -194,7 +213,7 @@
 
 #if defined(PSA_WANT_ECC_BRAINPOOL_P_R1_384)
 #if !defined(MBEDTLS_PSA_ACCEL_ECC_BRAINPOOL_P_R1_384) || \
-    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES) || \
+    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES) || \
     defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_ALGS)
 #define MBEDTLS_PSA_BUILTIN_ECC_BRAINPOOL_P_R1_384 1
 #define MBEDTLS_ECP_DP_BP384R1_ENABLED
@@ -203,7 +222,7 @@
 
 #if defined(PSA_WANT_ECC_BRAINPOOL_P_R1_512)
 #if !defined(MBEDTLS_PSA_ACCEL_ECC_BRAINPOOL_P_R1_512) || \
-    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES) || \
+    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES) || \
     defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_ALGS)
 #define MBEDTLS_PSA_BUILTIN_ECC_BRAINPOOL_P_R1_512 1
 #define MBEDTLS_ECP_DP_BP512R1_ENABLED
@@ -212,7 +231,7 @@
 
 #if defined(PSA_WANT_ECC_MONTGOMERY_255)
 #if !defined(MBEDTLS_PSA_ACCEL_ECC_MONTGOMERY_255) || \
-    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES) || \
+    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES) || \
     defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_ALGS)
 #define MBEDTLS_PSA_BUILTIN_ECC_MONTGOMERY_255 1
 #define MBEDTLS_ECP_DP_CURVE25519_ENABLED
@@ -221,7 +240,7 @@
 
 #if defined(PSA_WANT_ECC_MONTGOMERY_448)
 #if !defined(MBEDTLS_PSA_ACCEL_ECC_MONTGOMERY_448) || \
-    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES) || \
+    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES) || \
     defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_ALGS)
 #define MBEDTLS_PSA_BUILTIN_ECC_MONTGOMERY_448 1
 #define MBEDTLS_ECP_DP_CURVE448_ENABLED
@@ -230,7 +249,7 @@
 
 #if defined(PSA_WANT_ECC_SECP_R1_192)
 #if !defined(MBEDTLS_PSA_ACCEL_ECC_SECP_R1_192) || \
-    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES) || \
+    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES) || \
     defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_ALGS)
 #define MBEDTLS_PSA_BUILTIN_ECC_SECP_R1_192 1
 #define MBEDTLS_ECP_DP_SECP192R1_ENABLED
@@ -239,7 +258,7 @@
 
 #if defined(PSA_WANT_ECC_SECP_R1_224)
 #if !defined(MBEDTLS_PSA_ACCEL_ECC_SECP_R1_224) || \
-    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES) || \
+    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES) || \
     defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_ALGS)
 #define MBEDTLS_PSA_BUILTIN_ECC_SECP_R1_224 1
 #define MBEDTLS_ECP_DP_SECP224R1_ENABLED
@@ -248,7 +267,7 @@
 
 #if defined(PSA_WANT_ECC_SECP_R1_256)
 #if !defined(MBEDTLS_PSA_ACCEL_ECC_SECP_R1_256) || \
-    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES) || \
+    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES) || \
     defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_ALGS)
 #define MBEDTLS_PSA_BUILTIN_ECC_SECP_R1_256 1
 #define MBEDTLS_ECP_DP_SECP256R1_ENABLED
@@ -257,7 +276,7 @@
 
 #if defined(PSA_WANT_ECC_SECP_R1_384)
 #if !defined(MBEDTLS_PSA_ACCEL_ECC_SECP_R1_384) || \
-    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES) || \
+    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES) || \
     defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_ALGS)
 #define MBEDTLS_PSA_BUILTIN_ECC_SECP_R1_384 1
 #define MBEDTLS_ECP_DP_SECP384R1_ENABLED
@@ -266,7 +285,7 @@
 
 #if defined(PSA_WANT_ECC_SECP_R1_521)
 #if !defined(MBEDTLS_PSA_ACCEL_ECC_SECP_R1_521) || \
-    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES) || \
+    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES) || \
     defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_ALGS)
 #define MBEDTLS_PSA_BUILTIN_ECC_SECP_R1_521 1
 #define MBEDTLS_ECP_DP_SECP521R1_ENABLED
@@ -275,7 +294,7 @@
 
 #if defined(PSA_WANT_ECC_SECP_K1_192)
 #if !defined(MBEDTLS_PSA_ACCEL_ECC_SECP_K1_192) || \
-    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES) || \
+    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES) || \
     defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_ALGS)
 #define MBEDTLS_PSA_BUILTIN_ECC_SECP_K1_192 1
 #define MBEDTLS_ECP_DP_SECP192K1_ENABLED
@@ -284,7 +303,7 @@
 
 #if defined(PSA_WANT_ECC_SECP_K1_224)
 #if !defined(MBEDTLS_PSA_ACCEL_ECC_SECP_K1_224) || \
-    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES) || \
+    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES) || \
     defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_ALGS)
 #define MBEDTLS_PSA_BUILTIN_ECC_SECP_K1_224 1
 #define MBEDTLS_ECP_DP_SECP224K1_ENABLED
@@ -295,7 +314,7 @@
 
 #if defined(PSA_WANT_ECC_SECP_K1_256)
 #if !defined(MBEDTLS_PSA_ACCEL_ECC_SECP_K1_256) || \
-    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES) || \
+    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES) || \
     defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_ALGS)
 #define MBEDTLS_PSA_BUILTIN_ECC_SECP_K1_256 1
 #define MBEDTLS_ECP_DP_SECP256K1_ENABLED
@@ -317,7 +336,7 @@
 #if defined(PSA_WANT_ALG_DETERMINISTIC_ECDSA)
 #if !defined(MBEDTLS_PSA_ACCEL_ALG_DETERMINISTIC_ECDSA) || \
     defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_WEIERSTRASS_CURVES) || \
-    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES_BASIC)
+    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES_BASIC)
 #define MBEDTLS_PSA_BUILTIN_ALG_DETERMINISTIC_ECDSA 1
 #define MBEDTLS_ECDSA_DETERMINISTIC
 #define MBEDTLS_HMAC_DRBG_C
@@ -333,7 +352,7 @@
 #if defined(PSA_WANT_ALG_ECDH)
 #if !defined(MBEDTLS_PSA_ACCEL_ALG_ECDH) || \
     defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_CURVES) || \
-    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES_BASIC)
+    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES_BASIC)
 #define MBEDTLS_PSA_BUILTIN_ALG_ECDH 1
 #define MBEDTLS_ECDH_C
 #define MBEDTLS_ECP_C
@@ -344,7 +363,7 @@
 #if defined(PSA_WANT_ALG_ECDSA)
 #if !defined(MBEDTLS_PSA_ACCEL_ALG_ECDSA) || \
     defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_WEIERSTRASS_CURVES) || \
-    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES_BASIC)
+    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES_BASIC)
 #define MBEDTLS_PSA_BUILTIN_ALG_ECDSA 1
 #define MBEDTLS_ECDSA_C
 #define MBEDTLS_ECP_C
@@ -357,7 +376,7 @@
 #if defined(PSA_WANT_ALG_JPAKE)
 #if !defined(MBEDTLS_PSA_ACCEL_ALG_JPAKE) || \
     !defined(MBEDTLS_PSA_ACCEL_ECC_SECP_R1_256) || \
-    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEYTYPES_BASIC)
+    defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_KEY_TYPES_BASIC)
 #define MBEDTLS_PSA_BUILTIN_PAKE 1
 #define MBEDTLS_PSA_BUILTIN_ALG_JPAKE 1
 #define MBEDTLS_ECP_DP_SECP256R1_ENABLED
@@ -421,9 +440,9 @@
 #endif /* missing accel */
 #endif /* PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_GENERATE */
 
-/* Special case: we don't support cooked key derivation in drivers yet */
+/* Note: the condition is always true as DERIVE can't be accelerated yet */
 #if defined(PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE)
-#if 1 || !defined(MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_DERIVE) || \
+#if !defined(MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_DERIVE) || \
     defined(MBEDTLS_PSA_ECC_ACCEL_INCOMPLETE_CURVES)
 #define MBEDTLS_PSA_BUILTIN_KEY_TYPE_ECC_KEY_PAIR_DERIVE 1
 #define MBEDTLS_ECP_LIGHT
diff --git a/include/mbedtls/mbedtls_config.h b/include/mbedtls/mbedtls_config.h
index 1c541ca..af07613 100644
--- a/include/mbedtls/mbedtls_config.h
+++ b/include/mbedtls/mbedtls_config.h
@@ -1451,15 +1451,16 @@
  *   #PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_EXPORT and/or
  *   #PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_GENERATE as needed.
  *
- * \note To genuinely benefit from the smaller code size of p256-m, make
- *       sure that you do not enable any ECC-related option that requires
- *       the built-in implementation of elliptic curve arithmetic. This
- *       means enabling #MBEDTLS_PSA_CRYPTO_C, #MBEDTLS_PSA_CRYPTO_CONFIG,
- *       #PSA_WANT_ECC_SECP_R1_256 and #MBEDTLS_PSA_P256M_DRIVER_ENABLED,
- *       plus any of the `PSA_WANT_ALG_xxx` and `PSA_WANT_KEY_TYPE_xxx`
- *       options listed above, and not enabling other ECC-related options
- *       through `PSA_WANT_xxx` or `MBEDTLS_xxx` (in particular, not
- *       enabling other curves or EC-JPAKE).
+ * \note To benefit from the smaller code size of p256-m, make sure that you
+ *       do not enable any ECC-related option not supported by p256-m: this
+ *       would cause the built-in ECC implementation to be built as well, in
+ *       order to provide the required option.
+ *       Make sure #PSA_WANT_ALG_DETERMINISTIC_ECDSA, #PSA_WANT_ALG_JPAKE and
+ *       #PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE, and curves other than
+ *       SECP256R1 are disabled as they are not supported by this driver.
+ *       Also, avoid defining #MBEDTLS_PK_PARSE_EC_COMPRESSED or
+ *       #MBEDTLS_PK_PARSE_EC_EXTENDED as those currently require a subset of
+ *       the built-in ECC implementation, see docs/driver-only-builds.md.
  */
 //#define MBEDTLS_PSA_P256M_DRIVER_ENABLED
 
diff --git a/include/mbedtls/ssl.h b/include/mbedtls/ssl.h
index d6083da..debb1cc 100644
--- a/include/mbedtls/ssl.h
+++ b/include/mbedtls/ssl.h
@@ -1503,7 +1503,7 @@
     const uint16_t *MBEDTLS_PRIVATE(sig_algs);      /*!< allowed signature algorithms       */
 #endif /* MBEDTLS_SSL_HANDSHAKE_WITH_CERT_ENABLED */
 
-#if defined(MBEDTLS_PK_HAVE_ECC_KEYS) && !defined(MBEDTLS_DEPRECATED_REMOVED)
+#if defined(MBEDTLS_ECP_C) && !defined(MBEDTLS_DEPRECATED_REMOVED)
     const mbedtls_ecp_group_id *MBEDTLS_PRIVATE(curve_list); /*!< allowed curves             */
 #endif
 
@@ -3651,7 +3651,7 @@
                                      unsigned int bitlen);
 #endif /* MBEDTLS_DHM_C && MBEDTLS_SSL_CLI_C */
 
-#if defined(MBEDTLS_PK_HAVE_ECC_KEYS)
+#if defined(MBEDTLS_ECP_C)
 #if !defined(MBEDTLS_DEPRECATED_REMOVED)
 /**
  * \brief          Set the allowed curves in order of preference.
@@ -3697,7 +3697,7 @@
 void MBEDTLS_DEPRECATED mbedtls_ssl_conf_curves(mbedtls_ssl_config *conf,
                                                 const mbedtls_ecp_group_id *curves);
 #endif /* MBEDTLS_DEPRECATED_REMOVED */
-#endif /* MBEDTLS_PK_HAVE_ECC_KEYS */
+#endif /* MBEDTLS_ECP_C */
 
 /**
  * \brief          Set the allowed groups in order of preference.
diff --git a/library/CMakeLists.txt b/library/CMakeLists.txt
index 65b957a..2b1fd43 100644
--- a/library/CMakeLists.txt
+++ b/library/CMakeLists.txt
@@ -323,7 +323,9 @@
     target_include_directories(${target}
         PUBLIC $<BUILD_INTERFACE:${MBEDTLS_DIR}/include/>
                $<INSTALL_INTERFACE:include/>
-        PRIVATE ${MBEDTLS_DIR}/library/)
+        PRIVATE ${MBEDTLS_DIR}/library/
+                # Needed to include psa_crypto_driver_wrappers.h
+                ${CMAKE_CURRENT_BINARY_DIR})
     # Pass-through MBEDTLS_CONFIG_FILE and MBEDTLS_USER_CONFIG_FILE
     if(MBEDTLS_CONFIG_FILE)
         target_compile_definitions(${target}
diff --git a/library/ssl_tls.c b/library/ssl_tls.c
index 6bc4aaa..fc3fb85 100644
--- a/library/ssl_tls.c
+++ b/library/ssl_tls.c
@@ -1150,7 +1150,7 @@
  * mbedtls_ssl_conf_curves returns void and so can't return
  * any error codes.
  */
-#if defined(MBEDTLS_PK_HAVE_ECC_KEYS)
+#if defined(MBEDTLS_ECP_C)
 #if !defined(MBEDTLS_DEPRECATED_REMOVED)
     /* Heap allocate and translate curve_list from internal to IANA group ids */
     if (ssl->conf->curve_list != NULL) {
@@ -1185,7 +1185,7 @@
         ssl->handshake->group_list_heap_allocated = 0;
     }
 #endif /* MBEDTLS_DEPRECATED_REMOVED */
-#endif /* MBEDTLS_PK_HAVE_ECC_KEYS */
+#endif /* MBEDTLS_ECP_C */
 
 #if defined(MBEDTLS_SSL_HANDSHAKE_WITH_CERT_ENABLED)
 #if !defined(MBEDTLS_DEPRECATED_REMOVED)
@@ -2921,7 +2921,7 @@
 }
 #endif /* MBEDTLS_SSL_HANDSHAKE_WITH_CERT_ENABLED */
 
-#if defined(MBEDTLS_PK_HAVE_ECC_KEYS)
+#if defined(MBEDTLS_ECP_C)
 #if !defined(MBEDTLS_DEPRECATED_REMOVED)
 /*
  * Set the allowed elliptic curves
@@ -2938,7 +2938,7 @@
     conf->group_list = NULL;
 }
 #endif /* MBEDTLS_DEPRECATED_REMOVED */
-#endif /* MBEDTLS_PK_HAVE_ECC_KEYS */
+#endif /* MBEDTLS_ECP_C */
 
 /*
  * Set the allowed groups
@@ -2946,7 +2946,7 @@
 void mbedtls_ssl_conf_groups(mbedtls_ssl_config *conf,
                              const uint16_t *group_list)
 {
-#if defined(MBEDTLS_PK_HAVE_ECC_KEYS) && !defined(MBEDTLS_DEPRECATED_REMOVED)
+#if defined(MBEDTLS_ECP_C) && !defined(MBEDTLS_DEPRECATED_REMOVED)
     conf->curve_list = NULL;
 #endif
     conf->group_list = group_list;
@@ -5321,7 +5321,7 @@
             conf->sig_algs = ssl_preset_suiteb_sig_algs;
 #endif /* MBEDTLS_SSL_HANDSHAKE_WITH_CERT_ENABLED */
 
-#if defined(MBEDTLS_PK_HAVE_ECC_KEYS) && !defined(MBEDTLS_DEPRECATED_REMOVED)
+#if defined(MBEDTLS_ECP_C) && !defined(MBEDTLS_DEPRECATED_REMOVED)
             conf->curve_list = NULL;
 #endif
             conf->group_list = ssl_preset_suiteb_groups;
@@ -5347,7 +5347,7 @@
             conf->sig_algs = ssl_preset_default_sig_algs;
 #endif /* MBEDTLS_SSL_HANDSHAKE_WITH_CERT_ENABLED */
 
-#if defined(MBEDTLS_PK_HAVE_ECC_KEYS) && !defined(MBEDTLS_DEPRECATED_REMOVED)
+#if defined(MBEDTLS_ECP_C) && !defined(MBEDTLS_DEPRECATED_REMOVED)
             conf->curve_list = NULL;
 #endif
             conf->group_list = ssl_preset_default_groups;
diff --git a/programs/test/cmake_package/CMakeLists.txt b/programs/test/cmake_package/CMakeLists.txt
index 019e6e7..f498cf9 100644
--- a/programs/test/cmake_package/CMakeLists.txt
+++ b/programs/test/cmake_package/CMakeLists.txt
@@ -13,7 +13,9 @@
         "-H${MbedTLS_SOURCE_DIR}"
         "-B${MbedTLS_BINARY_DIR}"
         "-DENABLE_PROGRAMS=NO"
-        "-DENABLE_TESTING=NO")
+        "-DENABLE_TESTING=NO"
+        # Turn on generated files explicitly in case this is a release
+        "-DGEN_FILES=ON")
 
 execute_process(
     COMMAND "${CMAKE_COMMAND}"
diff --git a/programs/test/cmake_package_install/CMakeLists.txt b/programs/test/cmake_package_install/CMakeLists.txt
index 6070a6c..6937af4 100644
--- a/programs/test/cmake_package_install/CMakeLists.txt
+++ b/programs/test/cmake_package_install/CMakeLists.txt
@@ -15,6 +15,8 @@
         "-B${MbedTLS_BINARY_DIR}"
         "-DENABLE_PROGRAMS=NO"
         "-DENABLE_TESTING=NO"
+        # Turn on generated files explicitly in case this is a release
+        "-DGEN_FILES=ON"
         "-DCMAKE_INSTALL_PREFIX=${MbedTLS_INSTALL_DIR}")
 
 execute_process(
diff --git a/tests/configs/user-config-for-test.h b/tests/configs/user-config-for-test.h
index 9151532..a9386a2 100644
--- a/tests/configs/user-config-for-test.h
+++ b/tests/configs/user-config-for-test.h
@@ -52,7 +52,11 @@
  * the test driver implemented. */
 #define MBEDTLS_PSA_ACCEL_KEY_TYPE_AES
 #define MBEDTLS_PSA_ACCEL_KEY_TYPE_CAMELLIA
-#define MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_PUBLIC_KEY
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_BASIC
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_IMPORT
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_EXPORT
+#define MBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR_GENERATE
 #define MBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_KEY_PAIR
 #define MBEDTLS_PSA_ACCEL_ALG_CBC_NO_PADDING
 #define MBEDTLS_PSA_ACCEL_ALG_CBC_PKCS7
diff --git a/tests/scripts/all.sh b/tests/scripts/all.sh
index 0b2acdc..9e1d84f 100755
--- a/tests/scripts/all.sh
+++ b/tests/scripts/all.sh
@@ -428,9 +428,9 @@
 
 check_tools()
 {
-    for TOOL in "$@"; do
-        if ! `type "$TOOL" >/dev/null 2>&1`; then
-            err_msg "$TOOL not found!"
+    for tool in "$@"; do
+        if ! `type "$tool" >/dev/null 2>&1`; then
+            err_msg "$tool not found!"
             exit 1
         fi
     done
@@ -884,10 +884,10 @@
 # Adjust the configuration - for both libtestdriver1 and main library,
 # as they should have the same PSA_WANT macros.
 helper_libtestdriver1_adjust_config() {
-    BASE_CONFIG=$1
+    base_config=$1
     # Select the base configuration
-    if [ "$BASE_CONFIG" != "default" ]; then
-        scripts/config.py "$BASE_CONFIG"
+    if [ "$base_config" != "default" ]; then
+        scripts/config.py "$base_config"
     fi
 
     # Enable PSA-based config (necessary to use drivers)
@@ -910,8 +910,8 @@
     allowed_list="${1:-}"
     scripts/config.py unset-all "MBEDTLS_ECP_DP_[0-9A-Z_a-z]*_ENABLED"
 
-    for CURVE in $allowed_list; do
-        scripts/config.py set $CURVE
+    for curve in $allowed_list; do
+        scripts/config.py set $curve
     done
 }
 
@@ -920,8 +920,8 @@
 # in the following helpers.
 helper_get_psa_curve_list () {
     loc_list=""
-    for ITEM in $(sed -n 's/^#define PSA_WANT_\(ECC_[0-9A-Z_a-z]*\).*/\1/p' <"$CRYPTO_CONFIG_H"); do
-        loc_list="$loc_list $ITEM"
+    for item in $(sed -n 's/^#define PSA_WANT_\(ECC_[0-9A-Z_a-z]*\).*/\1/p' <"$CRYPTO_CONFIG_H"); do
+        loc_list="$loc_list $item"
     done
 
     echo "$loc_list"
@@ -931,13 +931,13 @@
 # is useful to easily get a list of key type symbols to accelerate.
 # The function accepts a single argument which is the key type: ECC, DH, RSA.
 helper_get_psa_key_type_list() {
-    KEY_TYPE="$1"
+    key_type="$1"
     loc_list=""
-    for ITEM in $(sed -n "s/^#define PSA_WANT_\(KEY_TYPE_${KEY_TYPE}_[0-9A-Z_a-z]*\).*/\1/p" <"$CRYPTO_CONFIG_H"); do
+    for item in $(sed -n "s/^#define PSA_WANT_\(KEY_TYPE_${key_type}_[0-9A-Z_a-z]*\).*/\1/p" <"$CRYPTO_CONFIG_H"); do
         # Skip DERIVE for elliptic keys since there is no driver dispatch for
         # it so it cannot be accelerated.
-        if [ "$ITEM" != "KEY_TYPE_ECC_KEY_PAIR_DERIVE" ]; then
-            loc_list="$loc_list $ITEM"
+        if [ "$item" != "KEY_TYPE_ECC_KEY_PAIR_DERIVE" ]; then
+            loc_list="$loc_list $item"
         fi
     done
 
@@ -1138,19 +1138,6 @@
 
     msg "test: context-info.sh (full config, ASan build)" # ~ 15 sec
     tests/context-info.sh
-
-    msg "test: check direct ECP dependencies in TLS and X.509"
-    docs/architecture/psa-migration/syms.sh full
-
-    # TODO: replace "mbedtls_ecp_curve" with "mbedtls_ecp" also for
-    # "full-tls-external" once Issue6839 is completed
-    not grep mbedtls_ecp_curve full-libmbedtls-external
-    not grep mbedtls_ecp full-libmbedx509-external
-
-    rm  full-libmbedtls-external \
-        full-libmbedtls-modules \
-        full-libmbedx509-external \
-        full-libmbedx509-modules
 }
 
 
@@ -1175,19 +1162,6 @@
 
     msg "test: context-info.sh (full config, ASan build)" # ~ 15 sec
     tests/context-info.sh
-
-    msg "test: check direct ECP dependencies in TLS and X.509"
-    docs/architecture/psa-migration/syms.sh full
-
-    # TODO: replace "mbedtls_ecp_curve" with "mbedtls_ecp" also for
-    # "full-tls-external" once Issue6839 is completed
-    not grep mbedtls_ecp_curve full-libmbedtls-external
-    not grep mbedtls_ecp full-libmbedx509-external
-
-    rm  full-libmbedtls-external \
-        full-libmbedtls-modules \
-        full-libmbedx509-external \
-        full-libmbedx509-modules
 }
 
 component_test_full_cmake_gcc_asan_new_bignum_test_hooks () {
@@ -2586,17 +2560,17 @@
 
 # Run tests with only (non-)Weierstrass accelerated
 # Common code used in:
-# - component_test_psa_crypto_config_accel_ecc_weirstrass_curves
-# - component_test_psa_crypto_config_accel_ecc_non_weirstrass_curves
+# - component_test_psa_crypto_config_accel_ecc_weierstrass_curves
+# - component_test_psa_crypto_config_accel_ecc_non_weierstrass_curves
 common_test_psa_crypto_config_accel_ecc_some_curves () {
-    WEIERSTRASS=$1
-    if [ $WEIERSTRASS -eq 1 ]; then
-        DESC="Weierstrass"
+    weierstrass=$1
+    if [ $weierstrass -eq 1 ]; then
+        desc="Weierstrass"
     else
-        DESC="non-Weierstrass"
+        desc="non-Weierstrass"
     fi
 
-    msg "build: full with accelerated EC algs and $DESC curves"
+    msg "build: crypto_full minus PK with accelerated EC algs and $desc curves"
 
     # Algorithms and key types to accelerate
     loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \
@@ -2611,17 +2585,17 @@
     # helper_get_psa_curve_list that only keeps Weierstrass families.
     loc_weierstrass_list=""
     loc_non_weierstrass_list=""
-    for ITEM in $(sed -n 's/^#define PSA_WANT_\(ECC_[0-9A-Z_a-z]*\).*/\1/p' <"$CRYPTO_CONFIG_H"); do
-        case $ITEM in
+    for item in $(sed -n 's/^#define PSA_WANT_\(ECC_[0-9A-Z_a-z]*\).*/\1/p' <"$CRYPTO_CONFIG_H"); do
+        case $item in
             ECC_BRAINPOOL*|ECC_SECP*)
-                loc_weierstrass_list="$loc_weierstrass_list $ITEM"
+                loc_weierstrass_list="$loc_weierstrass_list $item"
                 ;;
             *)
-                loc_non_weierstrass_list="$loc_non_weierstrass_list $ITEM"
+                loc_non_weierstrass_list="$loc_non_weierstrass_list $item"
                 ;;
         esac
     done
-    if [ $WEIERSTRASS -eq 1 ]; then
+    if [ $weierstrass -eq 1 ]; then
         loc_curve_list=$loc_weierstrass_list
     else
         loc_curve_list=$loc_non_weierstrass_list
@@ -2630,8 +2604,18 @@
     # Configure
     # ---------
 
-    # start with config full for maximum coverage (also enables USE_PSA)
-    helper_libtestdriver1_adjust_config "full"
+    # Start with config crypto_full and remove PK_C:
+    # that's what's supported now, see docs/driver-only-builds.md.
+    helper_libtestdriver1_adjust_config "crypto_full"
+    scripts/config.py unset MBEDTLS_PK_C
+    scripts/config.py unset MBEDTLS_PK_PARSE_C
+    scripts/config.py unset MBEDTLS_PK_WRITE_C
+    # We need to disable RSA too or PK will be re-enabled.
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset-all "PSA_WANT_KEY_TYPE_RSA_[0-9A-Z_a-z]*"
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset-all "PSA_WANT_ALG_RSA_[0-9A-Z_a-z]*"
+    scripts/config.py unset MBEDTLS_RSA_C
+    scripts/config.py unset MBEDTLS_PKCS1_V15
+    scripts/config.py unset MBEDTLS_PKCS1_V21
 
     # Disable modules that are accelerated - some will be re-enabled
     scripts/config.py unset MBEDTLS_ECDSA_C
@@ -2667,7 +2651,7 @@
     # - functions with mxz in the name are specific to Montgomery curves
     # - ecp_muladd is specific to Weierstrass curves
     ##nm library/ecp.o | tee ecp.syms
-    if [ $WEIERSTRASS -eq 1 ]; then
+    if [ $weierstrass -eq 1 ]; then
         not grep mbedtls_ecp_muladd library/ecp.o
         grep mxz library/ecp.o
     else
@@ -2676,7 +2660,7 @@
     fi
     # We expect ECDSA and ECJPAKE to be re-enabled only when
     # Weierstrass curves are not accelerated
-    if [ $WEIERSTRASS -eq 1 ]; then
+    if [ $weierstrass -eq 1 ]; then
         not grep mbedtls_ecdsa library/ecdsa.o
         not grep mbedtls_ecjpake  library/ecjpake.o
     else
@@ -2687,16 +2671,15 @@
     # Run the tests
     # -------------
 
-    msg "test suites: full with accelerated EC algs and $DESC curves"
-    # does not work for PK (and above), see #8255
-    make test SKIP_TEST_SUITES=pk,pkparse,pkwrite,x509parse,x509write,ssl,debug
+    msg "test suites: crypto_full minus PK with accelerated EC algs and $desc curves"
+    make test
 }
 
-component_test_psa_crypto_config_accel_ecc_weirstrass_curves () {
+component_test_psa_crypto_config_accel_ecc_weierstrass_curves () {
     common_test_psa_crypto_config_accel_ecc_some_curves 1
 }
 
-component_test_psa_crypto_config_accel_ecc_non_weirstrass_curves () {
+component_test_psa_crypto_config_accel_ecc_non_weierstrass_curves () {
     common_test_psa_crypto_config_accel_ecc_some_curves 0
 }
 
@@ -2712,10 +2695,10 @@
 # - component_test_psa_crypto_config_reference_ecc_ecp_light_only.
 # This supports comparing their test coverage with analyze_outcomes.py.
 config_psa_crypto_config_ecp_light_only () {
-    DRIVER_ONLY="$1"
+    driver_only="$1"
     # start with config full for maximum coverage (also enables USE_PSA)
     helper_libtestdriver1_adjust_config "full"
-    if [ "$DRIVER_ONLY" -eq 1 ]; then
+    if [ "$driver_only" -eq 1 ]; then
         # Disable modules that are accelerated
         scripts/config.py unset MBEDTLS_ECDSA_C
         scripts/config.py unset MBEDTLS_ECDH_C
@@ -2809,11 +2792,11 @@
 # PK_C and RSA_C are always disabled to ensure there is no remaining dependency
 # on the ECP module.
 config_psa_crypto_no_ecp_at_all () {
-    DRIVER_ONLY="$1"
+    driver_only="$1"
     # start with full config for maximum coverage (also enables USE_PSA)
     helper_libtestdriver1_adjust_config "full"
 
-    if [ "$DRIVER_ONLY" -eq 1 ]; then
+    if [ "$driver_only" -eq 1 ]; then
         # Disable modules that are accelerated
         scripts/config.py unset MBEDTLS_ECDSA_C
         scripts/config.py unset MBEDTLS_ECDH_C
@@ -2927,12 +2910,12 @@
 # $2: a string value which states which components are tested. Allowed values
 #     are "ECC" or "ECC_DH".
 config_psa_crypto_config_accel_ecc_ffdh_no_bignum() {
-    DRIVER_ONLY="$1"
-    TEST_TARGET="$2"
+    driver_only="$1"
+    test_target="$2"
     # start with full config for maximum coverage (also enables USE_PSA)
     helper_libtestdriver1_adjust_config "full"
 
-    if [ "$DRIVER_ONLY" -eq 1 ]; then
+    if [ "$driver_only" -eq 1 ]; then
         # Disable modules that are accelerated
         scripts/config.py unset MBEDTLS_ECDSA_C
         scripts/config.py unset MBEDTLS_ECDH_C
@@ -2963,7 +2946,7 @@
     scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
     scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
 
-    if [ "$TEST_TARGET" = "ECC" ]; then
+    if [ "$test_target" = "ECC" ]; then
         # When testing ECC only, we disable FFDH support, both from builtin and
         # PSA sides, and also disable the key exchanges that depend on DHM.
         scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_FFDH
@@ -2974,7 +2957,7 @@
     else
         # When testing ECC and DH instead, we disable DHM and depending key
         # exchanges only in the accelerated build
-        if [ "$DRIVER_ONLY" -eq 1 ]; then
+        if [ "$driver_only" -eq 1 ]; then
             scripts/config.py unset MBEDTLS_DHM_C
             scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
             scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
@@ -2999,18 +2982,18 @@
 # common_test_psa_crypto_config_reference_ecc_ffdh_no_bignum() for drivers
 # coverage analysis in the "analyze_outcomes.py" script.
 common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum () {
-    TEST_TARGET="$1"
+    test_target="$1"
 
     # This is an internal helper to simplify text message handling
-    if [ "$TEST_TARGET" = "ECC_DH" ]; then
-        ACCEL_TEXT="ECC/FFDH"
-        REMOVED_TEXT="ECP - DH"
+    if [ "$test_target" = "ECC_DH" ]; then
+        accel_text="ECC/FFDH"
+        removed_text="ECP - DH"
     else
-        ACCEL_TEXT="ECC"
-        REMOVED_TEXT="ECP"
+        accel_text="ECC"
+        removed_text="ECP"
     fi
 
-    msg "build: full + accelerated $ACCEL_TEXT algs + USE_PSA - $REMOVED_TEXT - BIGNUM"
+    msg "build: full + accelerated $accel_text algs + USE_PSA - $removed_text - BIGNUM"
 
     # By default we accelerate all EC keys/algs
     loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \
@@ -3018,7 +3001,7 @@
                     ALG_JPAKE \
                     $(helper_get_psa_key_type_list "ECC")"
     # Optionally we can also add DH to the list of accelerated items
-    if [ "$TEST_TARGET" = "ECC_DH" ]; then
+    if [ "$test_target" = "ECC_DH" ]; then
         loc_accel_list="$loc_accel_list \
                         ALG_FFDH \
                         $(helper_get_psa_key_type_list "DH")"
@@ -3033,7 +3016,7 @@
     # ---------
 
     # Set common configurations between library's and driver's builds
-    config_psa_crypto_config_accel_ecc_ffdh_no_bignum 1 "$TEST_TARGET"
+    config_psa_crypto_config_accel_ecc_ffdh_no_bignum 1 "$test_target"
     # Disable all the builtin curves. All the required algs are accelerated.
     helper_disable_builtin_curves
 
@@ -3062,11 +3045,11 @@
     # Run the tests
     # -------------
 
-    msg "test suites: full + accelerated $ACCEL_TEXT algs + USE_PSA - $REMOVED_TEXT - DHM - BIGNUM"
+    msg "test suites: full + accelerated $accel_text algs + USE_PSA - $removed_text - DHM - BIGNUM"
 
     make test
 
-    msg "ssl-opt: full + accelerated $ACCEL_TEXT algs + USE_PSA - $REMOVED_TEXT - BIGNUM"
+    msg "ssl-opt: full + accelerated $accel_text algs + USE_PSA - $removed_text - BIGNUM"
     tests/ssl-opt.sh
 }
 
@@ -3082,25 +3065,25 @@
 # common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum() for drivers'
 # coverage analysis in "analyze_outcomes.py" script.
 common_test_psa_crypto_config_reference_ecc_ffdh_no_bignum () {
-    TEST_TARGET="$1"
+    test_target="$1"
 
     # This is an internal helper to simplify text message handling
-    if [ "$TEST_TARGET" = "ECC_DH" ]; then
-        ACCEL_TEXT="ECC/FFDH"
+    if [ "$test_target" = "ECC_DH" ]; then
+        accel_text="ECC/FFDH"
     else
-        ACCEL_TEXT="ECC"
+        accel_text="ECC"
     fi
 
-    msg "build: full + non accelerated $ACCEL_TEXT algs + USE_PSA"
+    msg "build: full + non accelerated $accel_text algs + USE_PSA"
 
-    config_psa_crypto_config_accel_ecc_ffdh_no_bignum 0 "$TEST_TARGET"
+    config_psa_crypto_config_accel_ecc_ffdh_no_bignum 0 "$test_target"
 
     make
 
     msg "test suites: full + non accelerated EC algs + USE_PSA"
     make test
 
-    msg "ssl-opt: full + non accelerated $ACCEL_TEXT algs + USE_PSA"
+    msg "ssl-opt: full + non accelerated $accel_text algs + USE_PSA"
     tests/ssl-opt.sh
 }
 
@@ -3177,21 +3160,8 @@
 
     common_tfm_config
 
-    # Set the list of accelerated components in order to remove them from
-    # builtin support.
-    loc_accel_list="ALG_ECDSA \
-                    ALG_ECDH \
-                    ECC_SECP_R1_256 \
-                    KEY_TYPE_ECC_KEY_PAIR_BASIC \
-                    KEY_TYPE_ECC_KEY_PAIR_IMPORT \
-                    KEY_TYPE_ECC_KEY_PAIR_EXPORT \
-                    KEY_TYPE_ECC_KEY_PAIR_GENERATE \
-                    KEY_TYPE_ECC_PUBLIC_KEY"
-    loc_accel_flags="$( echo "$loc_accel_list" | sed 's/[^ ]* */-DMBEDTLS_PSA_ACCEL_&/g' )"
-
     # Build crypto library specifying we want to use P256M code for EC operations
-    make CFLAGS="$ASAN_CFLAGS $loc_accel_flags -DMBEDTLS_PSA_P256M_DRIVER_ENABLED -I../tests/include/spe" LDFLAGS="$ASAN_CFLAGS"
-
+    make CFLAGS="$ASAN_CFLAGS -DMBEDTLS_PSA_P256M_DRIVER_ENABLED -I../tests/include/spe" LDFLAGS="$ASAN_CFLAGS"
 
     # Make sure any built-in EC alg was not re-enabled by accident (additive config)
     not grep mbedtls_ecdsa_ library/ecdsa.o
@@ -3228,14 +3198,14 @@
 # - build
 # - test only TLS (i.e. test_suite_tls and ssl-opt)
 build_full_minus_something_and_test_tls () {
-    SYMBOLS_TO_DISABLE="$1"
+    symbols_to_disable="$1"
 
     msg "build: full minus something, test TLS"
 
     scripts/config.py full
-    for SYM in $SYMBOLS_TO_DISABLE; do
-        echo "Disabling $SYM"
-        scripts/config.py unset $SYM
+    for sym in $symbols_to_disable; do
+        echo "Disabling $sym"
+        scripts/config.py unset $sym
     done
 
     make
@@ -3264,22 +3234,22 @@
 # - $1 is the key type under test, i.e. ECC/RSA/DH
 # - $2 is the key option to be unset (i.e. generate, derive, etc)
 build_and_test_psa_want_key_pair_partial() {
-    KEY_TYPE=$1
-    UNSET_OPTION=$2
-    DISABLED_PSA_WANT="PSA_WANT_KEY_TYPE_${KEY_TYPE}_KEY_PAIR_${UNSET_OPTION}"
+    key_type=$1
+    unset_option=$2
+    disabled_psa_want="PSA_WANT_KEY_TYPE_${key_type}_KEY_PAIR_${unset_option}"
 
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO - ${DISABLED_PSA_WANT}"
+    msg "build: full - MBEDTLS_USE_PSA_CRYPTO - ${disabled_psa_want}"
     scripts/config.py full
     scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
     scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
 
     # All the PSA_WANT_KEY_TYPE_xxx_KEY_PAIR_yyy are enabled by default in
     # crypto_config.h so we just disable the one we don't want.
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset "$DISABLED_PSA_WANT"
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset "$disabled_psa_want"
 
     make CC=gcc CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
 
-    msg "test: full - MBEDTLS_USE_PSA_CRYPTO - ${DISABLED_PSA_WANT}"
+    msg "test: full - MBEDTLS_USE_PSA_CRYPTO - ${disabled_psa_want}"
     make test
 }
 
@@ -3484,10 +3454,10 @@
 
 # Auxiliary function to build config for hashes with and without drivers
 config_psa_crypto_hash_use_psa () {
-    DRIVER_ONLY="$1"
+    driver_only="$1"
     # start with config full for maximum coverage (also enables USE_PSA)
     helper_libtestdriver1_adjust_config "full"
-    if [ "$DRIVER_ONLY" -eq 1 ]; then
+    if [ "$driver_only" -eq 1 ]; then
         # disable the built-in implementation of hashes
         scripts/config.py unset MBEDTLS_MD5_C
         scripts/config.py unset MBEDTLS_RIPEMD160_C
@@ -3703,33 +3673,6 @@
     make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_ECDH -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS"
 }
 
-# This should be renamed to test and updated once the accelerator ECC key pair code is in place and ready to test.
-component_build_psa_accel_key_type_ecc_key_pair() {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_xxx"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" set-all "PSA_WANT_KEY_TYPE_ECC_[0-9A-Z_a-z]*"
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator ECC public key code is in place and ready to test.
-component_build_psa_accel_key_type_ecc_public_key() {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY 1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_BASIC
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_IMPORT
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_EXPORT
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_GENERATE
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_PUBLIC_KEY -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS"
-}
-
 # This should be renamed to test and updated once the accelerator HMAC code is in place and ready to test.
 component_build_psa_accel_alg_hmac() {
     msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_HMAC"
@@ -5295,11 +5238,16 @@
 }
 
 component_test_cmake_out_of_source () {
+    # Remove existing generated files so that we use the ones cmake
+    # generates
+    make neat
+
     msg "build: cmake 'out-of-source' build"
     MBEDTLS_ROOT_DIR="$PWD"
     mkdir "$OUT_OF_SOURCE_DIR"
     cd "$OUT_OF_SOURCE_DIR"
-    cmake -D CMAKE_BUILD_TYPE:String=Check "$MBEDTLS_ROOT_DIR"
+    # Note: Explicitly generate files as these are turned off in releases
+    cmake -D CMAKE_BUILD_TYPE:String=Check -D GEN_FILES=ON "$MBEDTLS_ROOT_DIR"
     make
 
     msg "test: cmake 'out-of-source' build"
@@ -5320,9 +5268,14 @@
 }
 
 component_test_cmake_as_subdirectory () {
+    # Remove existing generated files so that we use the ones CMake
+    # generates
+    make neat
+
     msg "build: cmake 'as-subdirectory' build"
     cd programs/test/cmake_subproject
-    cmake .
+    # Note: Explicitly generate files as these are turned off in releases
+    cmake -D GEN_FILES=ON .
     make
     ./cmake_subproject
 }
@@ -5331,6 +5284,10 @@
 }
 
 component_test_cmake_as_package () {
+    # Remove existing generated files so that we use the ones CMake
+    # generates
+    make neat
+
     msg "build: cmake 'as-package' build"
     cd programs/test/cmake_package
     cmake .
@@ -5342,6 +5299,10 @@
 }
 
 component_test_cmake_as_package_install () {
+    # Remove existing generated files so that we use the ones CMake
+    # generates
+    make neat
+
     msg "build: cmake 'as-installed-package' build"
     cd programs/test/cmake_package_install
     cmake .
diff --git a/tests/scripts/analyze_outcomes.py b/tests/scripts/analyze_outcomes.py
index 3e2f3a9..81adb71 100755
--- a/tests/scripts/analyze_outcomes.py
+++ b/tests/scripts/analyze_outcomes.py
@@ -271,6 +271,9 @@
                     'PSA key derivation: HKDF-SHA-256 -> ECC secp521r1 #0',
                     'PSA key derivation: HKDF-SHA-256 -> ECC secp521r1 #1',
                 ],
+                'test_suite_ssl': [
+                    'Test configuration of groups for DHE through mbedtls_ssl_conf_curves()',
+                ],
             }
         }
     },
@@ -330,6 +333,9 @@
                     'Parse Public EC Key #8a (RFC 5480, brainpoolP384r1, compressed)',
                     'Parse Public EC Key #9a (RFC 5480, brainpoolP512r1, compressed)',
                 ],
+                'test_suite_ssl': [
+                    'Test configuration of groups for DHE through mbedtls_ssl_conf_curves()',
+                ],
             }
         }
     },
@@ -423,6 +429,9 @@
                     'Debug print mbedtls_mpi: 764 bits #1',
                     'Debug print mbedtls_mpi: 764 bits #2',
                 ],
+                'test_suite_ssl': [
+                    'Test configuration of groups for DHE through mbedtls_ssl_conf_curves()',
+                ],
             }
         }
     },
@@ -517,6 +526,9 @@
                     'Debug print mbedtls_mpi: 764 bits #1',
                     'Debug print mbedtls_mpi: 764 bits #2',
                 ],
+                'test_suite_ssl': [
+                    'Test configuration of groups for DHE through mbedtls_ssl_conf_curves()',
+                ],
             }
         }
     },
diff --git a/tests/suites/test_suite_ssl.function b/tests/suites/test_suite_ssl.function
index 5ccfdaa..3ad1e19 100644
--- a/tests/suites/test_suite_ssl.function
+++ b/tests/suites/test_suite_ssl.function
@@ -3059,7 +3059,7 @@
 }
 /* END_CASE */
 
-/* BEGIN_CASE depends_on:MBEDTLS_PK_HAVE_ECC_KEYS:!MBEDTLS_DEPRECATED_REMOVED:!MBEDTLS_DEPRECATED_WARNING:MBEDTLS_ECP_HAVE_SECP192R1:MBEDTLS_ECP_HAVE_SECP224R1:MBEDTLS_ECP_HAVE_SECP256R1 */
+/* BEGIN_CASE depends_on:MBEDTLS_ECP_C:!MBEDTLS_DEPRECATED_REMOVED:!MBEDTLS_DEPRECATED_WARNING:MBEDTLS_ECP_HAVE_SECP192R1:MBEDTLS_ECP_HAVE_SECP224R1:MBEDTLS_ECP_HAVE_SECP256R1 */
 void conf_curve()
 {