diff --git a/tests/scripts/all.sh b/tests/scripts/all.sh
index 3bf0ea9..ed097df 100755
--- a/tests/scripts/all.sh
+++ b/tests/scripts/all.sh
@@ -999,5448 +999,11 @@
     make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -I../tests/include -I../tests -I../../tests -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_TEST_LIBTESTDRIVER1 $loc_accel_flags" LDFLAGS="-ltestdriver1 $ASAN_CFLAGS" "$@"
 }
 
-################################################################
-#### Basic checks
-################################################################
-
-#
-# Test Suites to be executed
-#
-# The test ordering tries to optimize for the following criteria:
-# 1. Catch possible problems early, by running first tests that run quickly
-#    and/or are more likely to fail than others (eg I use Clang most of the
-#    time, so start with a GCC build).
-# 2. Minimize total running time, by avoiding useless rebuilds
-#
-# Indicative running times are given for reference.
-
-component_check_recursion () {
-    msg "Check: recursion.pl" # < 1s
-    tests/scripts/recursion.pl library/*.c
-}
-
-component_check_generated_files () {
-    msg "Check: check-generated-files, files generated with make" # 2s
-    make generated_files
-    tests/scripts/check-generated-files.sh
-
-    msg "Check: check-generated-files -u, files present" # 2s
-    tests/scripts/check-generated-files.sh -u
-    # Check that the generated files are considered up to date.
-    tests/scripts/check-generated-files.sh
-
-    msg "Check: check-generated-files -u, files absent" # 2s
-    command make neat
-    tests/scripts/check-generated-files.sh -u
-    # Check that the generated files are considered up to date.
-    tests/scripts/check-generated-files.sh
-
-    # This component ends with the generated files present in the source tree.
-    # This is necessary for subsequent components!
-}
-
-component_check_doxy_blocks () {
-    msg "Check: doxygen markup outside doxygen blocks" # < 1s
-    tests/scripts/check-doxy-blocks.pl
-}
-
-component_check_files () {
-    msg "Check: file sanity checks (permissions, encodings)" # < 1s
-    tests/scripts/check_files.py
-}
-
-component_check_changelog () {
-    msg "Check: changelog entries" # < 1s
-    rm -f ChangeLog.new
-    scripts/assemble_changelog.py -o ChangeLog.new
-    if [ -e ChangeLog.new ]; then
-        # Show the diff for information. It isn't an error if the diff is
-        # non-empty.
-        diff -u ChangeLog ChangeLog.new || true
-        rm ChangeLog.new
-    fi
-}
-
-component_check_names () {
-    msg "Check: declared and exported names (builds the library)" # < 3s
-    tests/scripts/check_names.py -v
-}
-
-component_check_test_cases () {
-    msg "Check: test case descriptions" # < 1s
-    if [ $QUIET -eq 1 ]; then
-        opt='--quiet'
-    else
-        opt=''
-    fi
-    tests/scripts/check_test_cases.py -q $opt
-    unset opt
-}
-
-component_check_test_dependencies () {
-    msg "Check: test case dependencies: legacy vs PSA" # < 1s
-    # The purpose of this component is to catch unjustified dependencies on
-    # legacy feature macros (MBEDTLS_xxx) in PSA tests. Generally speaking,
-    # PSA test should use PSA feature macros (PSA_WANT_xxx, more rarely
-    # MBEDTLS_PSA_xxx).
-    #
-    # Most of the time, use of legacy MBEDTLS_xxx macros are mistakes, which
-    # this component is meant to catch. However a few of them are justified,
-    # mostly by the absence of a PSA equivalent, so this component includes a
-    # list of expected exceptions.
-
-    found="check-test-deps-found-$$"
-    expected="check-test-deps-expected-$$"
-
-    # Find legacy dependencies in PSA tests
-    grep 'depends_on' \
-        tests/suites/test_suite_psa*.data tests/suites/test_suite_psa*.function |
-        grep -Eo '!?MBEDTLS_[^: ]*' |
-        grep -v -e MBEDTLS_PSA_ -e MBEDTLS_TEST_ |
-        sort -u > $found
-
-    # Expected ones with justification - keep in sorted order by ASCII table!
-    rm -f $expected
-    # No PSA equivalent - WANT_KEY_TYPE_AES means all sizes
-    echo "!MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH" >> $expected
-    # No PSA equivalent - used to skip decryption tests in PSA-ECB, CBC/XTS/NIST_KW/DES
-    echo "!MBEDTLS_BLOCK_CIPHER_NO_DECRYPT" >> $expected
-    # MBEDTLS_ASN1_WRITE_C is used by import_rsa_made_up() in test_suite_psa_crypto
-    # in order to build a fake RSA key of the wanted size based on
-    # PSA_VENDOR_RSA_MAX_KEY_BITS. The legacy module is only used by
-    # the test code and that's probably the most convenient way of achieving
-    # the test's goal.
-    echo "MBEDTLS_ASN1_WRITE_C" >> $expected
-    # No PSA equivalent - we should probably have one in the future.
-    echo "MBEDTLS_ECP_RESTARTABLE" >> $expected
-    # No PSA equivalent - needed by some init tests
-    echo "MBEDTLS_ENTROPY_NV_SEED" >> $expected
-    # No PSA equivalent - required to run threaded tests.
-    echo "MBEDTLS_THREADING_PTHREAD" >> $expected
-
-    # Compare reality with expectation.
-    # We want an exact match, to ensure the above list remains up-to-date.
-    #
-    # The output should be empty. When it's not:
-    # - Each '+' line is a macro that was found but not expected. You want to
-    # find where that macro occurs, and either replace it with PSA macros, or
-    # add it to the exceptions list above with a justification.
-    # - Each '-' line is a macro that was expected but not found; it means the
-    # exceptions list above should be updated by removing that macro.
-    diff -U0 $expected $found
-
-    rm $found $expected
-}
-
-component_check_doxygen_warnings () {
-    msg "Check: doxygen warnings (builds the documentation)" # ~ 3s
-    tests/scripts/doxygen.sh
-}
-
-
-
-################################################################
-#### Build and test many configurations and targets
-################################################################
-
-component_test_default_out_of_box () {
-    msg "build: make, default config (out-of-box)" # ~1min
-    make
-    # Disable fancy stuff
-    unset MBEDTLS_TEST_OUTCOME_FILE
-
-    msg "test: main suites make, default config (out-of-box)" # ~10s
-    make test
-
-    msg "selftest: make, default config (out-of-box)" # ~10s
-    programs/test/selftest
-
-    msg "program demos: make, default config (out-of-box)" # ~10s
-    tests/scripts/run_demos.py
-}
-
-component_test_default_cmake_gcc_asan () {
-    msg "build: cmake, gcc, ASan" # ~ 1 min 50s
-    CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: main suites (inc. selftests) (ASan build)" # ~ 50s
-    make test
-
-    msg "program demos (ASan build)" # ~10s
-    tests/scripts/run_demos.py
-
-    msg "test: selftest (ASan build)" # ~ 10s
-    programs/test/selftest
-
-    msg "test: metatests (GCC, ASan build)"
-    tests/scripts/run-metatests.sh any asan poison
-
-    msg "test: ssl-opt.sh (ASan build)" # ~ 1 min
-    tests/ssl-opt.sh
-
-    msg "test: compat.sh (ASan build)" # ~ 6 min
-    tests/compat.sh
-
-    msg "test: context-info.sh (ASan build)" # ~ 15 sec
-    tests/context-info.sh
-}
-
-component_test_default_cmake_gcc_asan_new_bignum () {
-    msg "build: cmake, gcc, ASan" # ~ 1 min 50s
-    scripts/config.py set MBEDTLS_ECP_WITH_MPI_UINT
-    CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: main suites (inc. selftests) (ASan build)" # ~ 50s
-    make test
-
-    msg "test: selftest (ASan build)" # ~ 10s
-    programs/test/selftest
-
-    msg "test: ssl-opt.sh (ASan build)" # ~ 1 min
-    tests/ssl-opt.sh
-
-    msg "test: compat.sh (ASan build)" # ~ 6 min
-    tests/compat.sh
-
-    msg "test: context-info.sh (ASan build)" # ~ 15 sec
-    tests/context-info.sh
-}
-
-component_test_full_cmake_gcc_asan () {
-    msg "build: full config, cmake, gcc, ASan"
-    scripts/config.py full
-    CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: main suites (inc. selftests) (full config, ASan build)"
-    make test
-
-    msg "test: selftest (full config, ASan build)" # ~ 10s
-    programs/test/selftest
-
-    msg "test: ssl-opt.sh (full config, ASan build)"
-    tests/ssl-opt.sh
-
-    # Note: the next two invocations cover all compat.sh test cases.
-    # We should use the same here and in basic-build-test.sh.
-    msg "test: compat.sh: default version (full config, ASan build)"
-    tests/compat.sh -e 'ARIA\|CHACHA'
-
-    msg "test: compat.sh: next: ARIA, Chacha (full config, ASan build)"
-    env OPENSSL="$OPENSSL_NEXT" tests/compat.sh -e '^$' -f 'ARIA\|CHACHA'
-
-    msg "test: context-info.sh (full config, ASan build)" # ~ 15 sec
-    tests/context-info.sh
-}
-
-
-component_test_full_cmake_gcc_asan_new_bignum () {
-    msg "build: full config, cmake, gcc, ASan"
-    scripts/config.py full
-    scripts/config.py set MBEDTLS_ECP_WITH_MPI_UINT
-    CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: main suites (inc. selftests) (full config, new bignum, ASan)"
-    make test
-
-    msg "test: selftest (full config, new bignum, ASan)" # ~ 10s
-    programs/test/selftest
-
-    msg "test: ssl-opt.sh (full config, new bignum, ASan)"
-    tests/ssl-opt.sh
-
-    # Note: the next two invocations cover all compat.sh test cases.
-    # We should use the same here and in basic-build-test.sh.
-    msg "test: compat.sh: default version (full config, new bignum, ASan)"
-    tests/compat.sh -e 'ARIA\|CHACHA'
-
-    msg "test: compat.sh: next: ARIA, Chacha (full config, new bignum, ASan)"
-    env OPENSSL="$OPENSSL_NEXT" tests/compat.sh -e '^$' -f 'ARIA\|CHACHA'
-
-    msg "test: context-info.sh (full config, new bignum, ASan)" # ~ 15 sec
-    tests/context-info.sh
-}
-
-component_test_psa_crypto_key_id_encodes_owner () {
-    msg "build: full config + PSA_CRYPTO_KEY_ID_ENCODES_OWNER, cmake, gcc, ASan"
-    scripts/config.py full
-    scripts/config.py set MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
-    CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: full config - USE_PSA_CRYPTO + PSA_CRYPTO_KEY_ID_ENCODES_OWNER, cmake, gcc, ASan"
-    make test
-}
-
-component_test_psa_assume_exclusive_buffers () {
-    msg "build: full config + MBEDTLS_PSA_ASSUME_EXCLUSIVE_BUFFERS, cmake, gcc, ASan"
-    scripts/config.py full
-    scripts/config.py set MBEDTLS_PSA_ASSUME_EXCLUSIVE_BUFFERS
-    CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: full config + MBEDTLS_PSA_ASSUME_EXCLUSIVE_BUFFERS, cmake, gcc, ASan"
-    make test
-}
-
-# check_renamed_symbols HEADER LIB
-# Check that if HEADER contains '#define MACRO ...' then MACRO is not a symbol
-# name is LIB.
-check_renamed_symbols () {
-    ! nm "$2" | sed 's/.* //' |
-      grep -x -F "$(sed -n 's/^ *# *define  *\([A-Z_a-z][0-9A-Z_a-z]*\)..*/\1/p' "$1")"
-}
-
-component_build_psa_crypto_spm () {
-    msg "build: full config + PSA_CRYPTO_KEY_ID_ENCODES_OWNER + PSA_CRYPTO_SPM, make, gcc"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS
-    scripts/config.py set MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
-    scripts/config.py set MBEDTLS_PSA_CRYPTO_SPM
-    # We can only compile, not link, since our test and sample programs
-    # aren't equipped for the modified names used when MBEDTLS_PSA_CRYPTO_SPM
-    # is active.
-    make CC=gcc CFLAGS='-Werror -Wall -Wextra -I../tests/include/spe' lib
-
-    # Check that if a symbol is renamed by crypto_spe.h, the non-renamed
-    # version is not present.
-    echo "Checking for renamed symbols in the library"
-    check_renamed_symbols tests/include/spe/crypto_spe.h library/libmbedcrypto.a
-}
-
-# Get a list of library-wise undefined symbols and ensure that they only
-# belong to psa_xxx() functions and not to mbedtls_yyy() ones.
-# This function is a common helper used by both:
-# - component_test_default_psa_crypto_client_without_crypto_provider
-# - component_build_full_psa_crypto_client_without_crypto_provider.
-common_check_mbedtls_missing_symbols () {
-    nm library/libmbedcrypto.a | grep ' [TRrDC] ' | grep -Eo '(mbedtls_|psa_).*' | sort -u > sym_def.txt
-    nm library/libmbedcrypto.a | grep ' U ' | grep -Eo '(mbedtls_|psa_).*' | sort -u > sym_undef.txt
-    comm sym_def.txt sym_undef.txt -13 > linking_errors.txt
-    not grep mbedtls_ linking_errors.txt
-
-    rm sym_def.txt sym_undef.txt linking_errors.txt
-}
-
-component_test_default_psa_crypto_client_without_crypto_provider () {
-    msg "build: default config - PSA_CRYPTO_C + PSA_CRYPTO_CLIENT"
-
-    scripts/config.py unset MBEDTLS_PSA_CRYPTO_C
-    scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C
-    scripts/config.py unset MBEDTLS_PSA_ITS_FILE_C
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py set MBEDTLS_PSA_CRYPTO_CLIENT
-    scripts/config.py unset MBEDTLS_LMS_C
-
-    make
-
-    msg "check missing symbols: default config - PSA_CRYPTO_C + PSA_CRYPTO_CLIENT"
-    common_check_mbedtls_missing_symbols
-
-    msg "test: default config - PSA_CRYPTO_C + PSA_CRYPTO_CLIENT"
-    make test
-}
-
-component_build_full_psa_crypto_client_without_crypto_provider () {
-    msg "build: full config - PSA_CRYPTO_C"
-
-    # Use full config which includes USE_PSA and CRYPTO_CLIENT.
-    scripts/config.py full
-
-    scripts/config.py unset MBEDTLS_PSA_CRYPTO_C
-    scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C
-    # Dynamic secure element support is a deprecated feature and it is not
-    # available when CRYPTO_C and PSA_CRYPTO_STORAGE_C are disabled.
-    scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
-
-    # Since there is no crypto provider in this build it is not possible to
-    # build all the test executables and progrems due to missing PSA functions
-    # at link time. Therefore we will just build libraries and we'll check
-    # that symbols of interest are there.
-    make lib
-
-    msg "check missing symbols: full config - PSA_CRYPTO_C"
-
-    common_check_mbedtls_missing_symbols
-
-    # Ensure that desired functions are included into the build (extend the
-    # following list as required).
-    grep mbedtls_pk_get_psa_attributes library/libmbedcrypto.a
-    grep mbedtls_pk_import_into_psa library/libmbedcrypto.a
-    grep mbedtls_pk_copy_from_psa library/libmbedcrypto.a
-}
-
-component_test_psa_crypto_rsa_no_genprime () {
-    msg "build: default config minus MBEDTLS_GENPRIME"
-    scripts/config.py unset MBEDTLS_GENPRIME
-    make
-
-    msg "test: default config minus MBEDTLS_GENPRIME"
-    make test
-}
-
-component_test_ref_configs () {
-    msg "test/build: ref-configs (ASan build)" # ~ 6 min 20s
-    # test-ref-configs works by overwriting mbedtls_config.h; this makes cmake
-    # want to re-generate generated files that depend on it, quite correctly.
-    # However this doesn't work as the generation script expects a specific
-    # format for mbedtls_config.h, which the other files don't follow. Also,
-    # cmake can't know this, but re-generation is actually not necessary as
-    # the generated files only depend on the list of available options, not
-    # whether they're on or off. So, disable cmake's (over-sensitive here)
-    # dependency resolution for generated files and just rely on them being
-    # present (thanks to pre_generate_files) by turning GEN_FILES off.
-    CC=$ASAN_CC cmake -D GEN_FILES=Off -D CMAKE_BUILD_TYPE:String=Asan .
-    tests/scripts/test-ref-configs.pl
-}
-
-component_test_no_renegotiation () {
-    msg "build: Default + !MBEDTLS_SSL_RENEGOTIATION (ASan build)" # ~ 6 min
-    scripts/config.py unset MBEDTLS_SSL_RENEGOTIATION
-    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: !MBEDTLS_SSL_RENEGOTIATION - main suites (inc. selftests) (ASan build)" # ~ 50s
-    make test
-
-    msg "test: !MBEDTLS_SSL_RENEGOTIATION - ssl-opt.sh (ASan build)" # ~ 6 min
-    tests/ssl-opt.sh
-}
-
-component_test_no_pem_no_fs () {
-    msg "build: Default + !MBEDTLS_PEM_PARSE_C + !MBEDTLS_FS_IO (ASan build)"
-    scripts/config.py unset MBEDTLS_PEM_PARSE_C
-    scripts/config.py unset MBEDTLS_FS_IO
-    scripts/config.py unset MBEDTLS_PSA_ITS_FILE_C # requires a filesystem
-    scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C # requires PSA ITS
-    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: !MBEDTLS_PEM_PARSE_C !MBEDTLS_FS_IO - main suites (inc. selftests) (ASan build)" # ~ 50s
-    make test
-
-    msg "test: !MBEDTLS_PEM_PARSE_C !MBEDTLS_FS_IO - ssl-opt.sh (ASan build)" # ~ 6 min
-    tests/ssl-opt.sh
-}
-
-component_test_rsa_no_crt () {
-    msg "build: Default + RSA_NO_CRT (ASan build)" # ~ 6 min
-    scripts/config.py set MBEDTLS_RSA_NO_CRT
-    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: RSA_NO_CRT - main suites (inc. selftests) (ASan build)" # ~ 50s
-    make test
-
-    msg "test: RSA_NO_CRT - RSA-related part of ssl-opt.sh (ASan build)" # ~ 5s
-    tests/ssl-opt.sh -f RSA
-
-    msg "test: RSA_NO_CRT - RSA-related part of compat.sh (ASan build)" # ~ 3 min
-    tests/compat.sh -t RSA
-
-    msg "test: RSA_NO_CRT - RSA-related part of context-info.sh (ASan build)" # ~ 15 sec
-    tests/context-info.sh
-}
-
-component_test_no_ctr_drbg_classic () {
-    msg "build: Full minus CTR_DRBG, classic crypto in TLS"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_CTR_DRBG_C
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-
-    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: Full minus CTR_DRBG, classic crypto - main suites"
-    make test
-
-    # In this configuration, the TLS test programs use HMAC_DRBG.
-    # The SSL tests are slow, so run a small subset, just enough to get
-    # confidence that the SSL code copes with HMAC_DRBG.
-    msg "test: Full minus CTR_DRBG, classic crypto - ssl-opt.sh (subset)"
-    tests/ssl-opt.sh -f 'Default\|SSL async private.*delay=\|tickets enabled on server'
-
-    msg "test: Full minus CTR_DRBG, classic crypto - compat.sh (subset)"
-    tests/compat.sh -m tls12 -t 'ECDSA PSK' -V NO -p OpenSSL
-}
-
-component_test_no_ctr_drbg_use_psa () {
-    msg "build: Full minus CTR_DRBG, PSA crypto in TLS"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_CTR_DRBG_C
-    scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
-
-    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: Full minus CTR_DRBG, USE_PSA_CRYPTO - main suites"
-    make test
-
-    # In this configuration, the TLS test programs use HMAC_DRBG.
-    # The SSL tests are slow, so run a small subset, just enough to get
-    # confidence that the SSL code copes with HMAC_DRBG.
-    msg "test: Full minus CTR_DRBG, USE_PSA_CRYPTO - ssl-opt.sh (subset)"
-    tests/ssl-opt.sh -f 'Default\|SSL async private.*delay=\|tickets enabled on server'
-
-    msg "test: Full minus CTR_DRBG, USE_PSA_CRYPTO - compat.sh (subset)"
-    tests/compat.sh -m tls12 -t 'ECDSA PSK' -V NO -p OpenSSL
-}
-
-component_test_no_hmac_drbg_classic () {
-    msg "build: Full minus HMAC_DRBG, classic crypto in TLS"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_HMAC_DRBG_C
-    scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-
-    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: Full minus HMAC_DRBG, classic crypto - main suites"
-    make test
-
-    # Normally our ECDSA implementation uses deterministic ECDSA. But since
-    # HMAC_DRBG is disabled in this configuration, randomized ECDSA is used
-    # instead.
-    # Test SSL with non-deterministic ECDSA. Only test features that
-    # might be affected by how ECDSA signature is performed.
-    msg "test: Full minus HMAC_DRBG, classic crypto - ssl-opt.sh (subset)"
-    tests/ssl-opt.sh -f 'Default\|SSL async private: sign'
-
-    # To save time, only test one protocol version, since this part of
-    # the protocol is identical in (D)TLS up to 1.2.
-    msg "test: Full minus HMAC_DRBG, classic crypto - compat.sh (ECDSA)"
-    tests/compat.sh -m tls12 -t 'ECDSA'
-}
-
-component_test_no_hmac_drbg_use_psa () {
-    msg "build: Full minus HMAC_DRBG, PSA crypto in TLS"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_HMAC_DRBG_C
-    scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG
-    scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
-
-    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: Full minus HMAC_DRBG, USE_PSA_CRYPTO - main suites"
-    make test
-
-    # Normally our ECDSA implementation uses deterministic ECDSA. But since
-    # HMAC_DRBG is disabled in this configuration, randomized ECDSA is used
-    # instead.
-    # Test SSL with non-deterministic ECDSA. Only test features that
-    # might be affected by how ECDSA signature is performed.
-    msg "test: Full minus HMAC_DRBG, USE_PSA_CRYPTO - ssl-opt.sh (subset)"
-    tests/ssl-opt.sh -f 'Default\|SSL async private: sign'
-
-    # To save time, only test one protocol version, since this part of
-    # the protocol is identical in (D)TLS up to 1.2.
-    msg "test: Full minus HMAC_DRBG, USE_PSA_CRYPTO - compat.sh (ECDSA)"
-    tests/compat.sh -m tls12 -t 'ECDSA'
-}
-
-component_test_psa_external_rng_no_drbg_classic () {
-    msg "build: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, classic crypto in TLS"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py set MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG
-    scripts/config.py unset MBEDTLS_ENTROPY_C
-    scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED
-    scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT
-    scripts/config.py unset MBEDTLS_CTR_DRBG_C
-    scripts/config.py unset MBEDTLS_HMAC_DRBG_C
-    scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG
-    # When MBEDTLS_USE_PSA_CRYPTO is disabled and there is no DRBG,
-    # the SSL test programs don't have an RNG and can't work. Explicitly
-    # make them use the PSA RNG with -DMBEDTLS_TEST_USE_PSA_CRYPTO_RNG.
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DMBEDTLS_TEST_USE_PSA_CRYPTO_RNG" LDFLAGS="$ASAN_CFLAGS"
-
-    msg "test: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, classic crypto - main suites"
-    make test
-
-    msg "test: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, classic crypto - ssl-opt.sh (subset)"
-    tests/ssl-opt.sh -f 'Default'
-}
-
-component_test_psa_external_rng_no_drbg_use_psa () {
-    msg "build: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, PSA crypto in TLS"
-    scripts/config.py full
-    scripts/config.py set MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG
-    scripts/config.py unset MBEDTLS_ENTROPY_C
-    scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED
-    scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT
-    scripts/config.py unset MBEDTLS_CTR_DRBG_C
-    scripts/config.py unset MBEDTLS_HMAC_DRBG_C
-    scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
-
-    msg "test: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, PSA crypto - main suites"
-    make test
-
-    msg "test: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, PSA crypto - ssl-opt.sh (subset)"
-    tests/ssl-opt.sh -f 'Default\|opaque'
-}
-
-component_test_psa_external_rng_use_psa_crypto () {
-    msg "build: full + PSA_CRYPTO_EXTERNAL_RNG + USE_PSA_CRYPTO minus CTR_DRBG"
-    scripts/config.py full
-    scripts/config.py set MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG
-    scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_CTR_DRBG_C
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
-
-    msg "test: full + PSA_CRYPTO_EXTERNAL_RNG + USE_PSA_CRYPTO minus CTR_DRBG"
-    make test
-
-    msg "test: full + PSA_CRYPTO_EXTERNAL_RNG + USE_PSA_CRYPTO minus CTR_DRBG"
-    tests/ssl-opt.sh -f 'Default\|opaque'
-}
-
-component_test_psa_inject_entropy () {
-    msg "build: full + MBEDTLS_PSA_INJECT_ENTROPY"
-    scripts/config.py full
-    scripts/config.py set MBEDTLS_PSA_INJECT_ENTROPY
-    scripts/config.py set MBEDTLS_ENTROPY_NV_SEED
-    scripts/config.py set MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES
-    scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT
-    scripts/config.py unset MBEDTLS_PLATFORM_STD_NV_SEED_READ
-    scripts/config.py unset MBEDTLS_PLATFORM_STD_NV_SEED_WRITE
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS '-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/user-config-for-test.h\"'" LDFLAGS="$ASAN_CFLAGS"
-
-    msg "test: full + MBEDTLS_PSA_INJECT_ENTROPY"
-    make test
-}
-
-component_test_sw_inet_pton () {
-    msg "build: default plus MBEDTLS_TEST_SW_INET_PTON"
-
-    # MBEDTLS_TEST_HOOKS required for x509_crt_parse_cn_inet_pton
-    scripts/config.py set MBEDTLS_TEST_HOOKS
-    make CFLAGS="-DMBEDTLS_TEST_SW_INET_PTON"
-
-    msg "test: default plus MBEDTLS_TEST_SW_INET_PTON"
-    make test
-}
-
-component_full_no_pkparse_pkwrite () {
-    msg "build: full without pkparse and pkwrite"
-
-    scripts/config.py crypto_full
-    scripts/config.py unset MBEDTLS_PK_PARSE_C
-    scripts/config.py unset MBEDTLS_PK_WRITE_C
-
-    make CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
-
-    # Ensure that PK_[PARSE|WRITE]_C were not re-enabled accidentally (additive config).
-    not grep mbedtls_pk_parse_key library/pkparse.o
-    not grep mbedtls_pk_write_key_der library/pkwrite.o
-
-    msg "test: full without pkparse and pkwrite"
-    make test
-}
-
-component_test_crypto_full_md_light_only () {
-    msg "build: crypto_full with only the light subset of MD"
-    scripts/config.py crypto_full
-    scripts/config.py unset MBEDTLS_PSA_CRYPTO_CONFIG
-    # Disable MD
-    scripts/config.py unset MBEDTLS_MD_C
-    # Disable direct dependencies of MD_C
-    scripts/config.py unset MBEDTLS_HKDF_C
-    scripts/config.py unset MBEDTLS_HMAC_DRBG_C
-    scripts/config.py unset MBEDTLS_PKCS7_C
-    # Disable indirect dependencies of MD_C
-    scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # needs HMAC_DRBG
-    # Disable things that would auto-enable MD_C
-    scripts/config.py unset MBEDTLS_PKCS5_C
-
-    # Note: MD-light is auto-enabled in build_info.h by modules that need it,
-    # which we haven't disabled, so no need to explicitly enable it.
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
-
-    # Make sure we don't have the HMAC functions, but the hashing functions
-    not grep mbedtls_md_hmac library/md.o
-    grep mbedtls_md library/md.o
-
-    msg "test: crypto_full with only the light subset of MD"
-    make test
-}
-
-component_test_full_no_cipher_no_psa_crypto () {
-    msg "build: full no CIPHER no PSA_CRYPTO_C"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_CIPHER_C
-    # Don't pull in cipher via PSA mechanisms
-    # (currently ignored anyway because we completely disable PSA)
-    scripts/config.py unset MBEDTLS_PSA_CRYPTO_CONFIG
-    # Disable features that depend on CIPHER_C
-    scripts/config.py unset MBEDTLS_CMAC_C
-    scripts/config.py unset MBEDTLS_NIST_KW_C
-    scripts/config.py unset MBEDTLS_PSA_CRYPTO_C
-    scripts/config.py unset MBEDTLS_PSA_CRYPTO_CLIENT
-    scripts/config.py unset MBEDTLS_SSL_TLS_C
-    scripts/config.py unset MBEDTLS_SSL_TICKET_C
-    # Disable features that depend on PSA_CRYPTO_C
-    scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
-    scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_LMS_C
-    scripts/config.py unset MBEDTLS_LMS_PRIVATE
-
-    msg "test: full no CIPHER no PSA_CRYPTO_C"
-    make test
-}
-
-# This is a common configurator and test function that is used in:
-# - component_test_full_no_cipher_with_psa_crypto
-# - component_test_full_no_cipher_with_psa_crypto_config
-# It accepts 2 input parameters:
-# - $1: boolean value which basically reflects status of MBEDTLS_PSA_CRYPTO_CONFIG
-# - $2: a text string which describes the test component
-common_test_full_no_cipher_with_psa_crypto () {
-    USE_CRYPTO_CONFIG="$1"
-    COMPONENT_DESCRIPTION="$2"
-
-    msg "build: $COMPONENT_DESCRIPTION"
-
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_CIPHER_C
-
-    if [ "$USE_CRYPTO_CONFIG" -eq 1 ]; then
-        # The built-in implementation of the following algs/key-types depends
-        # on CIPHER_C so we disable them.
-        # This does not hold for KEY_TYPE_CHACHA20 and ALG_CHACHA20_POLY1305
-        # so we keep them enabled.
-        scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CCM_STAR_NO_TAG
-        scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CMAC
-        scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CBC_NO_PADDING
-        scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CBC_PKCS7
-        scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CFB
-        scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CTR
-        scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_ECB_NO_PADDING
-        scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_OFB
-        scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_PBKDF2_AES_CMAC_PRF_128
-        scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_STREAM_CIPHER
-        scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_KEY_TYPE_DES
-    else
-        # Don't pull in cipher via PSA mechanisms
-        scripts/config.py unset MBEDTLS_PSA_CRYPTO_CONFIG
-        # Disable cipher modes/keys that make PSA depend on CIPHER_C.
-        # Keep CHACHA20 and CHACHAPOLY enabled since they do not depend on CIPHER_C.
-        scripts/config.py unset-all MBEDTLS_CIPHER_MODE
-    fi
-    # The following modules directly depends on CIPHER_C
-    scripts/config.py unset MBEDTLS_CMAC_C
-    scripts/config.py unset MBEDTLS_NIST_KW_C
-
-    make
-
-    # Ensure that CIPHER_C was not re-enabled
-    not grep mbedtls_cipher_init library/cipher.o
-
-    msg "test: $COMPONENT_DESCRIPTION"
-    make test
-}
-
-component_test_full_no_cipher_with_psa_crypto () {
-    common_test_full_no_cipher_with_psa_crypto 0 "full no CIPHER no CRYPTO_CONFIG"
-}
-
-component_test_full_no_cipher_with_psa_crypto_config () {
-    common_test_full_no_cipher_with_psa_crypto 1 "full no CIPHER"
-}
-
-component_test_full_no_ccm () {
-    msg "build: full no PSA_WANT_ALG_CCM"
-
-    # Full config enables:
-    # - USE_PSA_CRYPTO so that TLS code dispatches cipher/AEAD to PSA
-    # - CRYPTO_CONFIG so that PSA_WANT config symbols are evaluated
-    scripts/config.py full
-
-    # Disable PSA_WANT_ALG_CCM so that CCM is not supported in PSA. CCM_C is still
-    # enabled, but not used from TLS since USE_PSA is set.
-    # This is helpful to ensure that TLS tests below have proper dependencies.
-    #
-    # Note: also PSA_WANT_ALG_CCM_STAR_NO_TAG is enabled, but it does not cause
-    # PSA_WANT_ALG_CCM to be re-enabled.
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CCM
-
-    make
-
-    msg "test: full no PSA_WANT_ALG_CCM"
-    make test
-}
-
-component_test_full_no_ccm_star_no_tag () {
-    msg "build: full no PSA_WANT_ALG_CCM_STAR_NO_TAG"
-
-    # Full config enables CRYPTO_CONFIG so that PSA_WANT config symbols are evaluated
-    scripts/config.py full
-
-    # Disable CCM_STAR_NO_TAG, which is the target of this test, as well as all
-    # other components that enable MBEDTLS_PSA_BUILTIN_CIPHER internal symbol.
-    # This basically disables all unauthenticated ciphers on the PSA side, while
-    # keeping AEADs enabled.
-    #
-    # Note: PSA_WANT_ALG_CCM is enabled, but it does not cause
-    # PSA_WANT_ALG_CCM_STAR_NO_TAG to be re-enabled.
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CCM_STAR_NO_TAG
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_STREAM_CIPHER
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CTR
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CFB
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_OFB
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_ECB_NO_PADDING
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_NO_PADDING
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_PKCS7
-
-    make
-
-    # Ensure MBEDTLS_PSA_BUILTIN_CIPHER was not enabled
-    not grep mbedtls_psa_cipher library/psa_crypto_cipher.o
-
-    msg "test: full no PSA_WANT_ALG_CCM_STAR_NO_TAG"
-    make test
-}
-
-component_test_full_no_bignum () {
-    msg "build: full minus bignum"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_BIGNUM_C
-    # Direct dependencies of bignum
-    scripts/config.py unset MBEDTLS_ECP_C
-    scripts/config.py unset MBEDTLS_RSA_C
-    scripts/config.py unset MBEDTLS_DHM_C
-    # Direct dependencies of ECP
-    scripts/config.py unset MBEDTLS_ECDH_C
-    scripts/config.py unset MBEDTLS_ECDSA_C
-    scripts/config.py unset MBEDTLS_ECJPAKE_C
-    scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
-    # Disable what auto-enables ECP_LIGHT
-    scripts/config.py unset MBEDTLS_PK_PARSE_EC_EXTENDED
-    scripts/config.py unset MBEDTLS_PK_PARSE_EC_COMPRESSED
-    # Indirect dependencies of ECP
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
-    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
-    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
-    # Direct dependencies of DHM
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
-    # Direct dependencies of RSA
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
-    scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
-    # PK and its dependencies
-    scripts/config.py unset MBEDTLS_PK_C
-    scripts/config.py unset MBEDTLS_PK_PARSE_C
-    scripts/config.py unset MBEDTLS_PK_WRITE_C
-    scripts/config.py unset MBEDTLS_X509_USE_C
-    scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
-    scripts/config.py unset MBEDTLS_X509_CRL_PARSE_C
-    scripts/config.py unset MBEDTLS_X509_CSR_PARSE_C
-    scripts/config.py unset MBEDTLS_X509_CREATE_C
-    scripts/config.py unset MBEDTLS_X509_CRT_WRITE_C
-    scripts/config.py unset MBEDTLS_X509_CSR_WRITE_C
-    scripts/config.py unset MBEDTLS_PKCS7_C
-    scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
-    scripts/config.py unset MBEDTLS_SSL_ASYNC_PRIVATE
-    scripts/config.py unset MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
-
-    make
-
-    msg "test: full minus bignum"
-    make test
-}
-
-component_test_tls1_2_default_stream_cipher_only () {
-    msg "build: default with only stream cipher"
-
-    # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C
-    scripts/config.py unset MBEDTLS_GCM_C
-    scripts/config.py unset MBEDTLS_CCM_C
-    scripts/config.py unset MBEDTLS_CHACHAPOLY_C
-    #Disable TLS 1.3 (as no AEAD)
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    # Disable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
-    scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
-    # Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
-    scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC
-    # Enable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
-    scripts/config.py set MBEDTLS_CIPHER_NULL_CIPHER
-    # Modules that depend on AEAD
-    scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
-    scripts/config.py unset MBEDTLS_SSL_TICKET_C
-
-    make
-
-    msg "test: default with only stream cipher"
-    make test
-
-    # Not running ssl-opt.sh because most tests require a non-NULL ciphersuite.
-}
-
-component_test_tls1_2_default_stream_cipher_only_use_psa () {
-    msg "build: default with only stream cipher use psa"
-
-    scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
-    # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C)
-    scripts/config.py unset MBEDTLS_GCM_C
-    scripts/config.py unset MBEDTLS_CCM_C
-    scripts/config.py unset MBEDTLS_CHACHAPOLY_C
-    #Disable TLS 1.3 (as no AEAD)
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    # Disable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
-    scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
-    # Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
-    scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC
-    # Enable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
-    scripts/config.py set MBEDTLS_CIPHER_NULL_CIPHER
-    # Modules that depend on AEAD
-    scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
-    scripts/config.py unset MBEDTLS_SSL_TICKET_C
-
-    make
-
-    msg "test: default with only stream cipher use psa"
-    make test
-
-    # Not running ssl-opt.sh because most tests require a non-NULL ciphersuite.
-}
-
-component_test_tls1_2_default_cbc_legacy_cipher_only () {
-    msg "build: default with only CBC-legacy cipher"
-
-    # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C)
-    scripts/config.py unset MBEDTLS_GCM_C
-    scripts/config.py unset MBEDTLS_CCM_C
-    scripts/config.py unset MBEDTLS_CHACHAPOLY_C
-    #Disable TLS 1.3 (as no AEAD)
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    # Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
-    scripts/config.py set MBEDTLS_CIPHER_MODE_CBC
-    # Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
-    scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC
-    # Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
-    scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
-    # Modules that depend on AEAD
-    scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
-    scripts/config.py unset MBEDTLS_SSL_TICKET_C
-
-    make
-
-    msg "test: default with only CBC-legacy cipher"
-    make test
-
-    msg "test: default with only CBC-legacy cipher - ssl-opt.sh (subset)"
-    tests/ssl-opt.sh -f "TLS 1.2"
-}
-
-component_test_tls1_2_deafult_cbc_legacy_cipher_only_use_psa () {
-    msg "build: default with only CBC-legacy cipher use psa"
-
-    scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
-    # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C)
-    scripts/config.py unset MBEDTLS_GCM_C
-    scripts/config.py unset MBEDTLS_CCM_C
-    scripts/config.py unset MBEDTLS_CHACHAPOLY_C
-    #Disable TLS 1.3 (as no AEAD)
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    # Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
-    scripts/config.py set MBEDTLS_CIPHER_MODE_CBC
-    # Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
-    scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC
-    # Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
-    scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
-    # Modules that depend on AEAD
-    scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
-    scripts/config.py unset MBEDTLS_SSL_TICKET_C
-
-    make
-
-    msg "test: default with only CBC-legacy cipher use psa"
-    make test
-
-    msg "test: default with only CBC-legacy cipher use psa - ssl-opt.sh (subset)"
-    tests/ssl-opt.sh -f "TLS 1.2"
-}
-
-component_test_tls1_2_default_cbc_legacy_cbc_etm_cipher_only () {
-    msg "build: default with only CBC-legacy and CBC-EtM ciphers"
-
-    # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C)
-    scripts/config.py unset MBEDTLS_GCM_C
-    scripts/config.py unset MBEDTLS_CCM_C
-    scripts/config.py unset MBEDTLS_CHACHAPOLY_C
-    #Disable TLS 1.3 (as no AEAD)
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    # Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
-    scripts/config.py set MBEDTLS_CIPHER_MODE_CBC
-    # Enable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
-    scripts/config.py set MBEDTLS_SSL_ENCRYPT_THEN_MAC
-    # Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
-    scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
-    # Modules that depend on AEAD
-    scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
-    scripts/config.py unset MBEDTLS_SSL_TICKET_C
-
-    make
-
-    msg "test: default with only CBC-legacy and CBC-EtM ciphers"
-    make test
-
-    msg "test: default with only CBC-legacy and CBC-EtM ciphers - ssl-opt.sh (subset)"
-    tests/ssl-opt.sh -f "TLS 1.2"
-}
-
-component_test_tls1_2_default_cbc_legacy_cbc_etm_cipher_only_use_psa () {
-    msg "build: default with only CBC-legacy and CBC-EtM ciphers use psa"
-
-    scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
-    # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C)
-    scripts/config.py unset MBEDTLS_GCM_C
-    scripts/config.py unset MBEDTLS_CCM_C
-    scripts/config.py unset MBEDTLS_CHACHAPOLY_C
-    #Disable TLS 1.3 (as no AEAD)
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    # Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
-    scripts/config.py set MBEDTLS_CIPHER_MODE_CBC
-    # Enable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
-    scripts/config.py set MBEDTLS_SSL_ENCRYPT_THEN_MAC
-    # Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
-    scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
-    # Modules that depend on AEAD
-    scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
-    scripts/config.py unset MBEDTLS_SSL_TICKET_C
-
-    make
-
-    msg "test: default with only CBC-legacy and CBC-EtM ciphers use psa"
-    make test
-
-    msg "test: default with only CBC-legacy and CBC-EtM ciphers use psa - ssl-opt.sh (subset)"
-    tests/ssl-opt.sh -f "TLS 1.2"
-}
-
-# We're not aware of any other (open source) implementation of EC J-PAKE in TLS
-# that we could use for interop testing. However, we now have sort of two
-# implementations ourselves: one using PSA, the other not. At least test that
-# these two interoperate with each other.
-component_test_tls1_2_ecjpake_compatibility () {
-    msg "build: TLS1.2 server+client w/ EC-JPAKE w/o USE_PSA"
-    scripts/config.py set MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
-    # Explicitly make lib first to avoid a race condition:
-    # https://github.com/Mbed-TLS/mbedtls/issues/8229
-    make lib
-    make -C programs ssl/ssl_server2 ssl/ssl_client2
-    cp programs/ssl/ssl_server2 s2_no_use_psa
-    cp programs/ssl/ssl_client2 c2_no_use_psa
-
-    msg "build: TLS1.2 server+client w/ EC-JPAKE w/ USE_PSA"
-    scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
-    make clean
-    make lib
-    make -C programs ssl/ssl_server2 ssl/ssl_client2
-    make -C programs test/udp_proxy test/query_compile_time_config
-
-    msg "test: server w/o USE_PSA - client w/ USE_PSA, text password"
-    P_SRV=../s2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: working, TLS"
-    msg "test: server w/o USE_PSA - client w/ USE_PSA, opaque password"
-    P_SRV=../s2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: opaque password client only, working, TLS"
-    msg "test: client w/o USE_PSA - server w/ USE_PSA, text password"
-    P_CLI=../c2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: working, TLS"
-    msg "test: client w/o USE_PSA - server w/ USE_PSA, opaque password"
-    P_CLI=../c2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: opaque password server only, working, TLS"
-
-    rm s2_no_use_psa c2_no_use_psa
-}
-
-component_test_everest () {
-    msg "build: Everest ECDH context (ASan build)" # ~ 6 min
-    scripts/config.py set MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED
-    CC=clang cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: Everest ECDH context - main suites (inc. selftests) (ASan build)" # ~ 50s
-    make test
-
-    msg "test: metatests (clang, ASan)"
-    tests/scripts/run-metatests.sh any asan poison
-
-    msg "test: Everest ECDH context - ECDH-related part of ssl-opt.sh (ASan build)" # ~ 5s
-    tests/ssl-opt.sh -f ECDH
-
-    msg "test: Everest ECDH context - compat.sh with some ECDH ciphersuites (ASan build)" # ~ 3 min
-    # Exclude some symmetric ciphers that are redundant here to gain time.
-    tests/compat.sh -f ECDH -V NO -e 'ARIA\|CAMELLIA\|CHACHA'
-}
-
-component_test_everest_curve25519_only () {
-    msg "build: Everest ECDH context, only Curve25519" # ~ 6 min
-    scripts/config.py set MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED
-    scripts/config.py unset MBEDTLS_ECDSA_C
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
-    scripts/config.py unset MBEDTLS_ECJPAKE_C
-    # Disable all curves
-    scripts/config.py unset-all "MBEDTLS_ECP_DP_[0-9A-Z_a-z]*_ENABLED"
-    scripts/config.py set MBEDTLS_ECP_DP_CURVE25519_ENABLED
-
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
-
-    msg "test: Everest ECDH context, only Curve25519" # ~ 50s
-    make test
-}
-
-component_test_small_ssl_out_content_len () {
-    msg "build: small SSL_OUT_CONTENT_LEN (ASan build)"
-    scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 16384
-    scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 4096
-    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: small SSL_OUT_CONTENT_LEN - ssl-opt.sh MFL and large packet tests"
-    tests/ssl-opt.sh -f "Max fragment\|Large packet"
-}
-
-component_test_small_ssl_in_content_len () {
-    msg "build: small SSL_IN_CONTENT_LEN (ASan build)"
-    scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 4096
-    scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 16384
-    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: small SSL_IN_CONTENT_LEN - ssl-opt.sh MFL tests"
-    tests/ssl-opt.sh -f "Max fragment"
-}
-
-component_test_small_ssl_dtls_max_buffering () {
-    msg "build: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #0"
-    scripts/config.py set MBEDTLS_SSL_DTLS_MAX_BUFFERING 1000
-    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #0 - ssl-opt.sh specific reordering test"
-    tests/ssl-opt.sh -f "DTLS reordering: Buffer out-of-order hs msg before reassembling next, free buffered msg"
-}
-
-component_test_small_mbedtls_ssl_dtls_max_buffering () {
-    msg "build: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #1"
-    scripts/config.py set MBEDTLS_SSL_DTLS_MAX_BUFFERING 190
-    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #1 - ssl-opt.sh specific reordering test"
-    tests/ssl-opt.sh -f "DTLS reordering: Buffer encrypted Finished message, drop for fragmented NewSessionTicket"
-}
-
-component_test_psa_collect_statuses () {
-  msg "build+test: psa_collect_statuses" # ~30s
-  scripts/config.py full
-  tests/scripts/psa_collect_statuses.py
-  # Check that psa_crypto_init() succeeded at least once
-  grep -q '^0:psa_crypto_init:' tests/statuses.log
-  rm -f tests/statuses.log
-}
-
-component_test_full_cmake_clang () {
-    msg "build: cmake, full config, clang" # ~ 50s
-    scripts/config.py full
-    CC=clang CXX=clang cmake -D CMAKE_BUILD_TYPE:String=Release -D ENABLE_TESTING=On -D TEST_CPP=1 .
-    make
-
-    msg "test: main suites (full config, clang)" # ~ 5s
-    make test
-
-    msg "test: cpp_dummy_build (full config, clang)" # ~ 1s
-    programs/test/cpp_dummy_build
-
-    msg "test: metatests (clang)"
-    tests/scripts/run-metatests.sh any pthread
-
-    msg "program demos (full config, clang)" # ~10s
-    tests/scripts/run_demos.py
-
-    msg "test: psa_constant_names (full config, clang)" # ~ 1s
-    tests/scripts/test_psa_constant_names.py
-
-    msg "test: ssl-opt.sh default, ECJPAKE, SSL async (full config)" # ~ 1s
-    tests/ssl-opt.sh -f 'Default\|ECJPAKE\|SSL async private'
-}
-
-skip_suites_without_constant_flow () {
-    # Skip the test suites that don't have any constant-flow annotations.
-    # This will need to be adjusted if we ever start declaring things as
-    # secret from macros or functions inside tests/include or tests/src.
-    SKIP_TEST_SUITES=$(
-        git -C tests/suites grep -L TEST_CF_ 'test_suite_*.function' |
-            sed 's/test_suite_//; s/\.function$//' |
-            tr '\n' ,)
-    export SKIP_TEST_SUITES
-}
-
-skip_all_except_given_suite () {
-    # Skip all but the given test suite
-    SKIP_TEST_SUITES=$(
-        ls -1 tests/suites/test_suite_*.function |
-        grep -v $1.function |
-         sed 's/tests.suites.test_suite_//; s/\.function$//' |
-        tr '\n' ,)
-    export SKIP_TEST_SUITES
-}
-
-component_test_memsan_constant_flow () {
-    # This tests both (1) accesses to undefined memory, and (2) branches or
-    # memory access depending on secret values. To distinguish between those:
-    # - unset MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN - does the failure persist?
-    # - or alternatively, change the build type to MemSanDbg, which enables
-    # origin tracking and nicer stack traces (which are useful for debugging
-    # anyway), and check if the origin was TEST_CF_SECRET() or something else.
-    msg "build: cmake MSan (clang), full config minus MBEDTLS_USE_PSA_CRYPTO with constant flow testing"
-    scripts/config.py full
-    scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_AESNI_C # memsan doesn't grok asm
-    CC=clang cmake -D CMAKE_BUILD_TYPE:String=MemSan .
-    make
-
-    msg "test: main suites (full minus MBEDTLS_USE_PSA_CRYPTO, Msan + constant flow)"
-    make test
-}
-
-component_test_memsan_constant_flow_psa () {
-    # This tests both (1) accesses to undefined memory, and (2) branches or
-    # memory access depending on secret values. To distinguish between those:
-    # - unset MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN - does the failure persist?
-    # - or alternatively, change the build type to MemSanDbg, which enables
-    # origin tracking and nicer stack traces (which are useful for debugging
-    # anyway), and check if the origin was TEST_CF_SECRET() or something else.
-    msg "build: cmake MSan (clang), full config with constant flow testing"
-    scripts/config.py full
-    scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN
-    scripts/config.py unset MBEDTLS_AESNI_C # memsan doesn't grok asm
-    CC=clang cmake -D CMAKE_BUILD_TYPE:String=MemSan .
-    make
-
-    msg "test: main suites (Msan + constant flow)"
-    make test
-}
-
-component_release_test_valgrind_constant_flow () {
-    # This tests both (1) everything that valgrind's memcheck usually checks
-    # (heap buffer overflows, use of uninitialized memory, use-after-free,
-    # etc.) and (2) branches or memory access depending on secret values,
-    # which will be reported as uninitialized memory. To distinguish between
-    # secret and actually uninitialized:
-    # - unset MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND - does the failure persist?
-    # - or alternatively, build with debug info and manually run the offending
-    # test suite with valgrind --track-origins=yes, then check if the origin
-    # was TEST_CF_SECRET() or something else.
-    msg "build: cmake release GCC, full config minus MBEDTLS_USE_PSA_CRYPTO with constant flow testing"
-    scripts/config.py full
-    scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    skip_suites_without_constant_flow
-    cmake -D CMAKE_BUILD_TYPE:String=Release .
-    make
-
-    # this only shows a summary of the results (how many of each type)
-    # details are left in Testing/<date>/DynamicAnalysis.xml
-    msg "test: some suites (full minus MBEDTLS_USE_PSA_CRYPTO, valgrind + constant flow)"
-    make memcheck
-
-    # Test asm path in constant time module - by default, it will test the plain C
-    # path under Valgrind or Memsan. Running only the constant_time tests is fast (<1s)
-    msg "test: valgrind asm constant_time"
-    scripts/config.py --force set MBEDTLS_TEST_CONSTANT_FLOW_ASM
-    skip_all_except_given_suite test_suite_constant_time
-    cmake -D CMAKE_BUILD_TYPE:String=Release .
-    make clean
-    make
-    make memcheck
-}
-
-component_release_test_valgrind_constant_flow_psa () {
-    # This tests both (1) everything that valgrind's memcheck usually checks
-    # (heap buffer overflows, use of uninitialized memory, use-after-free,
-    # etc.) and (2) branches or memory access depending on secret values,
-    # which will be reported as uninitialized memory. To distinguish between
-    # secret and actually uninitialized:
-    # - unset MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND - does the failure persist?
-    # - or alternatively, build with debug info and manually run the offending
-    # test suite with valgrind --track-origins=yes, then check if the origin
-    # was TEST_CF_SECRET() or something else.
-    msg "build: cmake release GCC, full config with constant flow testing"
-    scripts/config.py full
-    scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND
-    skip_suites_without_constant_flow
-    cmake -D CMAKE_BUILD_TYPE:String=Release .
-    make
-
-    # this only shows a summary of the results (how many of each type)
-    # details are left in Testing/<date>/DynamicAnalysis.xml
-    msg "test: some suites (valgrind + constant flow)"
-    make memcheck
-}
-
-component_test_tsan () {
-    msg "build: TSan (clang)"
-    scripts/config.py full
-    scripts/config.py set MBEDTLS_THREADING_C
-    scripts/config.py set MBEDTLS_THREADING_PTHREAD
-    # Self-tests do not currently use multiple threads.
-    scripts/config.py unset MBEDTLS_SELF_TEST
-
-    # The deprecated MBEDTLS_PSA_CRYPTO_SE_C interface is not thread safe.
-    scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
-
-    CC=clang cmake -D CMAKE_BUILD_TYPE:String=TSan .
-    make
-
-    msg "test: main suites (TSan)"
-    make test
-}
-
-component_test_default_no_deprecated () {
-    # Test that removing the deprecated features from the default
-    # configuration leaves something consistent.
-    msg "build: make, default + MBEDTLS_DEPRECATED_REMOVED" # ~ 30s
-    scripts/config.py set MBEDTLS_DEPRECATED_REMOVED
-    make CFLAGS='-O -Werror -Wall -Wextra'
-
-    msg "test: make, default + MBEDTLS_DEPRECATED_REMOVED" # ~ 5s
-    make test
-}
-
-component_test_full_no_deprecated () {
-    msg "build: make, full_no_deprecated config" # ~ 30s
-    scripts/config.py full_no_deprecated
-    make CFLAGS='-O -Werror -Wall -Wextra'
-
-    msg "test: make, full_no_deprecated config" # ~ 5s
-    make test
-
-    msg "test: ensure that X509 has no direct dependency on BIGNUM_C"
-    not grep mbedtls_mpi library/libmbedx509.a
-}
-
-component_test_full_no_deprecated_deprecated_warning () {
-    # Test that there is nothing deprecated in "full_no_deprecated".
-    # A deprecated feature would trigger a warning (made fatal) from
-    # MBEDTLS_DEPRECATED_WARNING.
-    msg "build: make, full_no_deprecated config, MBEDTLS_DEPRECATED_WARNING" # ~ 30s
-    scripts/config.py full_no_deprecated
-    scripts/config.py unset MBEDTLS_DEPRECATED_REMOVED
-    scripts/config.py set MBEDTLS_DEPRECATED_WARNING
-    make CFLAGS='-O -Werror -Wall -Wextra'
-
-    msg "test: make, full_no_deprecated config, MBEDTLS_DEPRECATED_WARNING" # ~ 5s
-    make test
-}
-
-component_test_full_deprecated_warning () {
-    # Test that when MBEDTLS_DEPRECATED_WARNING is enabled, the build passes
-    # with only certain whitelisted types of warnings.
-    msg "build: make, full config + MBEDTLS_DEPRECATED_WARNING, expect warnings" # ~ 30s
-    scripts/config.py full
-    scripts/config.py set MBEDTLS_DEPRECATED_WARNING
-    # Expect warnings from '#warning' directives in check_config.h.
-    # Note that gcc is required to allow the use of -Wno-error=cpp, which allows us to
-    # display #warning messages without them being treated as errors.
-    make CC=gcc CFLAGS='-O -Werror -Wall -Wextra -Wno-error=cpp' lib programs
-
-    msg "build: make tests, full config + MBEDTLS_DEPRECATED_WARNING, expect warnings" # ~ 30s
-    # Set MBEDTLS_TEST_DEPRECATED to enable tests for deprecated features.
-    # By default those are disabled when MBEDTLS_DEPRECATED_WARNING is set.
-    # Expect warnings from '#warning' directives in check_config.h and
-    # from the use of deprecated functions in test suites.
-    make CC=gcc CFLAGS='-O -Werror -Wall -Wextra -Wno-error=deprecated-declarations -Wno-error=cpp -DMBEDTLS_TEST_DEPRECATED' tests
-
-    msg "test: full config + MBEDTLS_TEST_DEPRECATED" # ~ 30s
-    make test
-
-    msg "program demos: full config + MBEDTLS_TEST_DEPRECATED" # ~10s
-    tests/scripts/run_demos.py
-}
-
-# Check that the specified libraries exist and are empty.
-are_empty_libraries () {
-  nm "$@" >/dev/null 2>/dev/null
-  ! nm "$@" 2>/dev/null | grep -v ':$' | grep .
-}
-
-component_build_crypto_default () {
-  msg "build: make, crypto only"
-  scripts/config.py crypto
-  make CFLAGS='-O1 -Werror'
-  are_empty_libraries library/libmbedx509.* library/libmbedtls.*
-}
-
-component_build_crypto_full () {
-  msg "build: make, crypto only, full config"
-  scripts/config.py crypto_full
-  make CFLAGS='-O1 -Werror'
-  are_empty_libraries library/libmbedx509.* library/libmbedtls.*
-}
-
-component_test_crypto_for_psa_service () {
-  msg "build: make, config for PSA crypto service"
-  scripts/config.py crypto
-  scripts/config.py set MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
-  # Disable things that are not needed for just cryptography, to
-  # reach a configuration that would be typical for a PSA cryptography
-  # service providing all implemented PSA algorithms.
-  # System stuff
-  scripts/config.py unset MBEDTLS_ERROR_C
-  scripts/config.py unset MBEDTLS_TIMING_C
-  scripts/config.py unset MBEDTLS_VERSION_FEATURES
-  # Crypto stuff with no PSA interface
-  scripts/config.py unset MBEDTLS_BASE64_C
-  # Keep MBEDTLS_CIPHER_C because psa_crypto_cipher, CCM and GCM need it.
-  scripts/config.py unset MBEDTLS_HKDF_C # PSA's HKDF is independent
-  # Keep MBEDTLS_MD_C because deterministic ECDSA needs it for HMAC_DRBG.
-  scripts/config.py unset MBEDTLS_NIST_KW_C
-  scripts/config.py unset MBEDTLS_PEM_PARSE_C
-  scripts/config.py unset MBEDTLS_PEM_WRITE_C
-  scripts/config.py unset MBEDTLS_PKCS12_C
-  scripts/config.py unset MBEDTLS_PKCS5_C
-  # MBEDTLS_PK_PARSE_C and MBEDTLS_PK_WRITE_C are actually currently needed
-  # in PSA code to work with RSA keys. We don't require users to set those:
-  # they will be reenabled in build_info.h.
-  scripts/config.py unset MBEDTLS_PK_C
-  scripts/config.py unset MBEDTLS_PK_PARSE_C
-  scripts/config.py unset MBEDTLS_PK_WRITE_C
-  make CFLAGS='-O1 -Werror' all test
-  are_empty_libraries library/libmbedx509.* library/libmbedtls.*
-}
-
-component_build_crypto_baremetal () {
-  msg "build: make, crypto only, baremetal config"
-  scripts/config.py crypto_baremetal
-  make CFLAGS="-O1 -Werror -I$PWD/tests/include/baremetal-override/"
-  are_empty_libraries library/libmbedx509.* library/libmbedtls.*
-}
-support_build_crypto_baremetal () {
-    support_build_baremetal "$@"
-}
-
-component_build_baremetal () {
-  msg "build: make, baremetal config"
-  scripts/config.py baremetal
-  make CFLAGS="-O1 -Werror -I$PWD/tests/include/baremetal-override/"
-}
-support_build_baremetal () {
-    # Older Glibc versions include time.h from other headers such as stdlib.h,
-    # which makes the no-time.h-in-baremetal check fail. Ubuntu 16.04 has this
-    # problem, Ubuntu 18.04 is ok.
-    ! grep -q -F time.h /usr/include/x86_64-linux-gnu/sys/types.h
-}
-
-# depends.py family of tests
-component_test_depends_py_cipher_id () {
-    msg "test/build: depends.py cipher_id (gcc)"
-    tests/scripts/depends.py cipher_id --unset-use-psa
-}
-
-component_test_depends_py_cipher_chaining () {
-    msg "test/build: depends.py cipher_chaining (gcc)"
-    tests/scripts/depends.py cipher_chaining --unset-use-psa
-}
-
-component_test_depends_py_cipher_padding () {
-    msg "test/build: depends.py cipher_padding (gcc)"
-    tests/scripts/depends.py cipher_padding --unset-use-psa
-}
-
-component_test_depends_py_curves () {
-    msg "test/build: depends.py curves (gcc)"
-    tests/scripts/depends.py curves --unset-use-psa
-}
-
-component_test_depends_py_hashes () {
-    msg "test/build: depends.py hashes (gcc)"
-    tests/scripts/depends.py hashes --unset-use-psa
-}
-
-component_test_depends_py_kex () {
-    msg "test/build: depends.py kex (gcc)"
-    tests/scripts/depends.py kex --unset-use-psa
-}
-
-component_test_depends_py_pkalgs () {
-    msg "test/build: depends.py pkalgs (gcc)"
-    tests/scripts/depends.py pkalgs --unset-use-psa
-}
-
-# PSA equivalents of the depends.py tests
-component_test_depends_py_cipher_id_psa () {
-    msg "test/build: depends.py cipher_id (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
-    tests/scripts/depends.py cipher_id
-}
-
-component_test_depends_py_cipher_chaining_psa () {
-    msg "test/build: depends.py cipher_chaining (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
-    tests/scripts/depends.py cipher_chaining
-}
-
-component_test_depends_py_cipher_padding_psa () {
-    msg "test/build: depends.py cipher_padding (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
-    tests/scripts/depends.py cipher_padding
-}
-
-component_test_depends_py_curves_psa () {
-    msg "test/build: depends.py curves (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
-    tests/scripts/depends.py curves
-}
-
-component_test_depends_py_hashes_psa () {
-    msg "test/build: depends.py hashes (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
-    tests/scripts/depends.py hashes
-}
-
-component_test_depends_py_kex_psa () {
-    msg "test/build: depends.py kex (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
-    tests/scripts/depends.py kex
-}
-
-component_test_depends_py_pkalgs_psa () {
-    msg "test/build: depends.py pkalgs (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
-    tests/scripts/depends.py pkalgs
-}
-
-component_test_psa_crypto_config_ffdh_2048_only () {
-    msg "build: full config - only DH 2048"
-
-    scripts/config.py full
-
-    # Disable all DH groups other than 2048.
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_DH_RFC7919_3072
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_DH_RFC7919_4096
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_DH_RFC7919_6144
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_DH_RFC7919_8192
-
-    make CFLAGS="$ASAN_CFLAGS -Werror" LDFLAGS="$ASAN_CFLAGS"
-
-    msg "test: full config - only DH 2048"
-    make test
-
-    msg "ssl-opt: full config - only DH 2048"
-    tests/ssl-opt.sh -f "ffdh"
-}
-
-component_build_no_pk_rsa_alt_support () {
-    msg "build: !MBEDTLS_PK_RSA_ALT_SUPPORT" # ~30s
-
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_PK_RSA_ALT_SUPPORT
-    scripts/config.py set MBEDTLS_RSA_C
-    scripts/config.py set MBEDTLS_X509_CRT_WRITE_C
-
-    # Only compile - this is primarily to test for compile issues
-    make CFLAGS='-Werror -Wall -Wextra -I../tests/include/alt-dummy'
-}
-
-component_build_module_alt () {
-    msg "build: MBEDTLS_XXX_ALT" # ~30s
-    scripts/config.py full
-
-    # Disable options that are incompatible with some ALT implementations:
-    # aesni.c and padlock.c reference mbedtls_aes_context fields directly.
-    scripts/config.py unset MBEDTLS_AESNI_C
-    scripts/config.py unset MBEDTLS_PADLOCK_C
-    scripts/config.py unset MBEDTLS_AESCE_C
-    # MBEDTLS_ECP_RESTARTABLE is documented as incompatible.
-    scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
-    # You can only have one threading implementation: alt or pthread, not both.
-    scripts/config.py unset MBEDTLS_THREADING_PTHREAD
-    # The SpecifiedECDomain parsing code accesses mbedtls_ecp_group fields
-    # directly and assumes the implementation works with partial groups.
-    scripts/config.py unset MBEDTLS_PK_PARSE_EC_EXTENDED
-    # MBEDTLS_SHA256_*ALT can't be used with MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_*
-    scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
-    scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY
-    # MBEDTLS_SHA512_*ALT can't be used with MBEDTLS_SHA512_USE_A64_CRYPTO_*
-    scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT
-    scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_ONLY
-
-    # Enable all MBEDTLS_XXX_ALT for whole modules. Do not enable
-    # MBEDTLS_XXX_YYY_ALT which are for single functions.
-    scripts/config.py set-all 'MBEDTLS_([A-Z0-9]*|NIST_KW)_ALT'
-    scripts/config.py unset MBEDTLS_DHM_ALT #incompatible with MBEDTLS_DEBUG_C
-
-    # We can only compile, not link, since we don't have any implementations
-    # suitable for testing with the dummy alt headers.
-    make CFLAGS='-Werror -Wall -Wextra -I../tests/include/alt-dummy' lib
-}
-
-component_build_dhm_alt () {
-    msg "build: MBEDTLS_DHM_ALT" # ~30s
-    scripts/config.py full
-    scripts/config.py set MBEDTLS_DHM_ALT
-    # debug.c currently references mbedtls_dhm_context fields directly.
-    scripts/config.py unset MBEDTLS_DEBUG_C
-    # We can only compile, not link, since we don't have any implementations
-    # suitable for testing with the dummy alt headers.
-    make CFLAGS='-Werror -Wall -Wextra -I../tests/include/alt-dummy' lib
-}
-
-component_test_no_psa_crypto_full_cmake_asan () {
-    # full minus MBEDTLS_PSA_CRYPTO_C: run the same set of tests as basic-build-test.sh
-    msg "build: cmake, full config minus PSA crypto, ASan"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_PSA_CRYPTO_C
-    scripts/config.py unset MBEDTLS_PSA_CRYPTO_CLIENT
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py unset MBEDTLS_PSA_ITS_FILE_C
-    scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
-    scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C
-    scripts/config.py unset MBEDTLS_LMS_C
-    scripts/config.py unset MBEDTLS_LMS_PRIVATE
-    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: main suites (full minus PSA crypto)"
-    make test
-
-    # Note: ssl-opt.sh has some test cases that depend on
-    # MBEDTLS_ECP_RESTARTABLE && !MBEDTLS_USE_PSA_CRYPTO
-    # This is the only component where those tests are not skipped.
-    msg "test: ssl-opt.sh (full minus PSA crypto)"
-    tests/ssl-opt.sh
-
-    # Note: the next two invocations cover all compat.sh test cases.
-    # We should use the same here and in basic-build-test.sh.
-    msg "test: compat.sh: default version (full minus PSA crypto)"
-    tests/compat.sh -e 'ARIA\|CHACHA'
-
-    msg "test: compat.sh: next: ARIA, Chacha (full minus PSA crypto)"
-    env OPENSSL="$OPENSSL_NEXT" tests/compat.sh -e '^$' -f 'ARIA\|CHACHA'
-}
-
-component_test_psa_crypto_config_accel_ecdsa () {
-    msg "build: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDSA"
-
-    # Algorithms and key types to accelerate
-    loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \
-                    $(helper_get_psa_key_type_list "ECC") \
-                    $(helper_get_psa_curve_list)"
-
-    # Configure
-    # ---------
-
-    # Start from default config (no USE_PSA) + TLS 1.3
-    helper_libtestdriver1_adjust_config "default"
-
-    # Disable the module that's accelerated
-    scripts/config.py unset MBEDTLS_ECDSA_C
-
-    # Disable things that depend on it
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
-
-    # Build
-    # -----
-
-    # These hashes are needed for some ECDSA signature tests.
-    loc_extra_list="ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
-                    ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
-
-    helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
-
-    helper_libtestdriver1_make_main "$loc_accel_list"
-
-    # Make sure this was not re-enabled by accident (additive config)
-    not grep mbedtls_ecdsa_ library/ecdsa.o
-
-    # Run the tests
-    # -------------
-
-    msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDSA"
-    make test
-}
-
-component_test_psa_crypto_config_accel_ecdh () {
-    msg "build: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDH"
-
-    # Algorithms and key types to accelerate
-    loc_accel_list="ALG_ECDH \
-                    $(helper_get_psa_key_type_list "ECC") \
-                    $(helper_get_psa_curve_list)"
-
-    # Configure
-    # ---------
-
-    # Start from default config (no USE_PSA)
-    helper_libtestdriver1_adjust_config "default"
-
-    # Disable the module that's accelerated
-    scripts/config.py unset MBEDTLS_ECDH_C
-
-    # Disable things that depend on it
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
-
-    # Build
-    # -----
-
-    helper_libtestdriver1_make_drivers "$loc_accel_list"
-
-    helper_libtestdriver1_make_main "$loc_accel_list"
-
-    # Make sure this was not re-enabled by accident (additive config)
-    not grep mbedtls_ecdh_ library/ecdh.o
-
-    # Run the tests
-    # -------------
-
-    msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDH"
-    make test
-}
-
-component_test_psa_crypto_config_accel_ffdh () {
-    msg "build: full with accelerated FFDH"
-
-    # Algorithms and key types to accelerate
-    loc_accel_list="ALG_FFDH \
-                    $(helper_get_psa_key_type_list "DH") \
-                    $(helper_get_psa_dh_group_list)"
-
-    # Configure
-    # ---------
-
-    # start with full (USE_PSA and TLS 1.3)
-    helper_libtestdriver1_adjust_config "full"
-
-    # Disable the module that's accelerated
-    scripts/config.py unset MBEDTLS_DHM_C
-
-    # Disable things that depend on it
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
-
-    # Build
-    # -----
-
-    helper_libtestdriver1_make_drivers "$loc_accel_list"
-
-    helper_libtestdriver1_make_main "$loc_accel_list"
-
-    # Make sure this was not re-enabled by accident (additive config)
-    not grep mbedtls_dhm_ library/dhm.o
-
-    # Run the tests
-    # -------------
-
-    msg "test: full with accelerated FFDH"
-    make test
-
-    msg "ssl-opt: full with accelerated FFDH alg"
-    tests/ssl-opt.sh -f "ffdh"
-}
-
-component_test_psa_crypto_config_reference_ffdh () {
-    msg "build: full with non-accelerated FFDH"
-
-    # Start with full (USE_PSA and TLS 1.3)
-    helper_libtestdriver1_adjust_config "full"
-
-    # Disable things that are not supported
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
-    make
-
-    msg "test suites: full with non-accelerated FFDH alg"
-    make test
-
-    msg "ssl-opt: full with non-accelerated FFDH alg"
-    tests/ssl-opt.sh -f "ffdh"
-}
-
-component_test_psa_crypto_config_accel_pake () {
-    msg "build: full with accelerated PAKE"
-
-    loc_accel_list="ALG_JPAKE \
-                    $(helper_get_psa_key_type_list "ECC") \
-                    $(helper_get_psa_curve_list)"
-
-    # Configure
-    # ---------
-
-    helper_libtestdriver1_adjust_config "full"
-
-    # Make built-in fallback not available
-    scripts/config.py unset MBEDTLS_ECJPAKE_C
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
-
-    # Build
-    # -----
-
-    helper_libtestdriver1_make_drivers "$loc_accel_list"
-
-    helper_libtestdriver1_make_main "$loc_accel_list"
-
-    # Make sure this was not re-enabled by accident (additive config)
-    not grep mbedtls_ecjpake_init library/ecjpake.o
-
-    # Run the tests
-    # -------------
-
-    msg "test: full with accelerated PAKE"
-    make test
-}
-
-component_test_psa_crypto_config_accel_ecc_some_key_types () {
-    msg "build: full with accelerated EC algs and some key types"
-
-    # Algorithms and key types to accelerate
-    # For key types, use an explicitly list to omit GENERATE (and DERIVE)
-    loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \
-                    ALG_ECDH \
-                    ALG_JPAKE \
-                    KEY_TYPE_ECC_PUBLIC_KEY \
-                    KEY_TYPE_ECC_KEY_PAIR_BASIC \
-                    KEY_TYPE_ECC_KEY_PAIR_IMPORT \
-                    KEY_TYPE_ECC_KEY_PAIR_EXPORT \
-                    $(helper_get_psa_curve_list)"
-
-    # Configure
-    # ---------
-
-    # start with config full for maximum coverage (also enables USE_PSA)
-    helper_libtestdriver1_adjust_config "full"
-
-    # Disable modules that are accelerated - some will be re-enabled
-    scripts/config.py unset MBEDTLS_ECDSA_C
-    scripts/config.py unset MBEDTLS_ECDH_C
-    scripts/config.py unset MBEDTLS_ECJPAKE_C
-    scripts/config.py unset MBEDTLS_ECP_C
-
-    # Disable all curves - those that aren't accelerated should be re-enabled
-    helper_disable_builtin_curves
-
-    # Restartable feature is not yet supported by PSA. Once it will in
-    # the future, the following line could be removed (see issues
-    # 6061, 6332 and following ones)
-    scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
-
-    # this is not supported by the driver API yet
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE
-
-    # Build
-    # -----
-
-    # These hashes are needed for some ECDSA signature tests.
-    loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
-                    ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
-    helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
-
-    helper_libtestdriver1_make_main "$loc_accel_list"
-
-    # ECP should be re-enabled but not the others
-    not grep mbedtls_ecdh_ library/ecdh.o
-    not grep mbedtls_ecdsa library/ecdsa.o
-    not grep mbedtls_ecjpake  library/ecjpake.o
-    grep mbedtls_ecp library/ecp.o
-
-    # Run the tests
-    # -------------
-
-    msg "test suites: full with accelerated EC algs and some key types"
-    make test
-}
-
-# Run tests with only (non-)Weierstrass accelerated
-# Common code used in:
-# - component_test_psa_crypto_config_accel_ecc_weierstrass_curves
-# - component_test_psa_crypto_config_accel_ecc_non_weierstrass_curves
-common_test_psa_crypto_config_accel_ecc_some_curves () {
-    weierstrass=$1
-    if [ $weierstrass -eq 1 ]; then
-        desc="Weierstrass"
-    else
-        desc="non-Weierstrass"
-    fi
-
-    msg "build: crypto_full minus PK with accelerated EC algs and $desc curves"
-
-    # Note: Curves are handled in a special way by the libtestdriver machinery,
-    # so we only want to include them in the accel list when building the main
-    # libraries, hence the use of a separate variable.
-    # Note: the following loop is a modified version of
-    # helper_get_psa_curve_list that only keeps Weierstrass families.
-    loc_weierstrass_list=""
-    loc_non_weierstrass_list=""
-    for item in $(sed -n 's/^#define PSA_WANT_\(ECC_[0-9A-Z_a-z]*\).*/\1/p' <"$CRYPTO_CONFIG_H"); do
-        case $item in
-            ECC_BRAINPOOL*|ECC_SECP*)
-                loc_weierstrass_list="$loc_weierstrass_list $item"
-                ;;
-            *)
-                loc_non_weierstrass_list="$loc_non_weierstrass_list $item"
-                ;;
-        esac
-    done
-    if [ $weierstrass -eq 1 ]; then
-        loc_curve_list=$loc_weierstrass_list
-    else
-        loc_curve_list=$loc_non_weierstrass_list
-    fi
-
-    # Algorithms and key types to accelerate
-    loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \
-                    ALG_ECDH \
-                    ALG_JPAKE \
-                    $(helper_get_psa_key_type_list "ECC") \
-                    $loc_curve_list"
-
-    # Configure
-    # ---------
-
-    # Start with config crypto_full and remove PK_C:
-    # that's what's supported now, see docs/driver-only-builds.md.
-    helper_libtestdriver1_adjust_config "crypto_full"
-    scripts/config.py unset MBEDTLS_PK_C
-    scripts/config.py unset MBEDTLS_PK_PARSE_C
-    scripts/config.py unset MBEDTLS_PK_WRITE_C
-
-    # Disable modules that are accelerated - some will be re-enabled
-    scripts/config.py unset MBEDTLS_ECDSA_C
-    scripts/config.py unset MBEDTLS_ECDH_C
-    scripts/config.py unset MBEDTLS_ECJPAKE_C
-    scripts/config.py unset MBEDTLS_ECP_C
-
-    # Disable all curves - those that aren't accelerated should be re-enabled
-    helper_disable_builtin_curves
-
-    # Restartable feature is not yet supported by PSA. Once it will in
-    # the future, the following line could be removed (see issues
-    # 6061, 6332 and following ones)
-    scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
-
-    # this is not supported by the driver API yet
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE
-
-    # Build
-    # -----
-
-    # These hashes are needed for some ECDSA signature tests.
-    loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
-                    ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
-    helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
-
-    helper_libtestdriver1_make_main "$loc_accel_list"
-
-    # We expect ECDH to be re-enabled for the missing curves
-    grep mbedtls_ecdh_ library/ecdh.o
-    # We expect ECP to be re-enabled, however the parts specific to the
-    # families of curves that are accelerated should be ommited.
-    # - functions with mxz in the name are specific to Montgomery curves
-    # - ecp_muladd is specific to Weierstrass curves
-    ##nm library/ecp.o | tee ecp.syms
-    if [ $weierstrass -eq 1 ]; then
-        not grep mbedtls_ecp_muladd library/ecp.o
-        grep mxz library/ecp.o
-    else
-        grep mbedtls_ecp_muladd library/ecp.o
-        not grep mxz library/ecp.o
-    fi
-    # We expect ECDSA and ECJPAKE to be re-enabled only when
-    # Weierstrass curves are not accelerated
-    if [ $weierstrass -eq 1 ]; then
-        not grep mbedtls_ecdsa library/ecdsa.o
-        not grep mbedtls_ecjpake  library/ecjpake.o
-    else
-        grep mbedtls_ecdsa library/ecdsa.o
-        grep mbedtls_ecjpake  library/ecjpake.o
-    fi
-
-    # Run the tests
-    # -------------
-
-    msg "test suites: crypto_full minus PK with accelerated EC algs and $desc curves"
-    make test
-}
-
-component_test_psa_crypto_config_accel_ecc_weierstrass_curves () {
-    common_test_psa_crypto_config_accel_ecc_some_curves 1
-}
-
-component_test_psa_crypto_config_accel_ecc_non_weierstrass_curves () {
-    common_test_psa_crypto_config_accel_ecc_some_curves 0
-}
-
-# Auxiliary function to build config for all EC based algorithms (EC-JPAKE,
-# ECDH, ECDSA) with and without drivers.
-# The input parameter is a boolean value which indicates:
-# - 0 keep built-in EC algs,
-# - 1 exclude built-in EC algs (driver only).
-#
-# This is used by the two following components to ensure they always use the
-# same config, except for the use of driver or built-in EC algorithms:
-# - component_test_psa_crypto_config_accel_ecc_ecp_light_only;
-# - component_test_psa_crypto_config_reference_ecc_ecp_light_only.
-# This supports comparing their test coverage with analyze_outcomes.py.
-config_psa_crypto_config_ecp_light_only () {
-    driver_only="$1"
-    # start with config full for maximum coverage (also enables USE_PSA)
-    helper_libtestdriver1_adjust_config "full"
-    if [ "$driver_only" -eq 1 ]; then
-        # Disable modules that are accelerated
-        scripts/config.py unset MBEDTLS_ECDSA_C
-        scripts/config.py unset MBEDTLS_ECDH_C
-        scripts/config.py unset MBEDTLS_ECJPAKE_C
-        scripts/config.py unset MBEDTLS_ECP_C
-    fi
-
-    # Restartable feature is not yet supported by PSA. Once it will in
-    # the future, the following line could be removed (see issues
-    # 6061, 6332 and following ones)
-    scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
-}
-
-# Keep in sync with component_test_psa_crypto_config_reference_ecc_ecp_light_only
-component_test_psa_crypto_config_accel_ecc_ecp_light_only () {
-    msg "build: full with accelerated EC algs"
-
-    # Algorithms and key types to accelerate
-    loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \
-                    ALG_ECDH \
-                    ALG_JPAKE \
-                    $(helper_get_psa_key_type_list "ECC") \
-                    $(helper_get_psa_curve_list)"
-
-    # Configure
-    # ---------
-
-    # Use the same config as reference, only without built-in EC algs
-    config_psa_crypto_config_ecp_light_only 1
-
-    # Do not disable builtin curves because that support is required for:
-    # - MBEDTLS_PK_PARSE_EC_EXTENDED
-    # - MBEDTLS_PK_PARSE_EC_COMPRESSED
-
-    # Build
-    # -----
-
-    # These hashes are needed for some ECDSA signature tests.
-    loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
-                    ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
-    helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
-
-    helper_libtestdriver1_make_main "$loc_accel_list"
-
-    # Make sure any built-in EC alg was not re-enabled by accident (additive config)
-    not grep mbedtls_ecdsa_ library/ecdsa.o
-    not grep mbedtls_ecdh_ library/ecdh.o
-    not grep mbedtls_ecjpake_ library/ecjpake.o
-    not grep mbedtls_ecp_mul library/ecp.o
-
-    # Run the tests
-    # -------------
-
-    msg "test suites: full with accelerated EC algs"
-    make test
-
-    msg "ssl-opt: full with accelerated EC algs"
-    tests/ssl-opt.sh
-}
-
-# Keep in sync with component_test_psa_crypto_config_accel_ecc_ecp_light_only
-component_test_psa_crypto_config_reference_ecc_ecp_light_only () {
-    msg "build: MBEDTLS_PSA_CRYPTO_CONFIG with non-accelerated EC algs"
-
-    config_psa_crypto_config_ecp_light_only 0
-
-    make
-
-    msg "test suites: full with non-accelerated EC algs"
-    make test
-
-    msg "ssl-opt: full with non-accelerated EC algs"
-    tests/ssl-opt.sh
-}
-
-# This helper function is used by:
-# - component_test_psa_crypto_config_accel_ecc_no_ecp_at_all()
-# - component_test_psa_crypto_config_reference_ecc_no_ecp_at_all()
-# to ensure that both tests use the same underlying configuration when testing
-# driver's coverage with analyze_outcomes.py.
-#
-# This functions accepts 1 boolean parameter as follows:
-# - 1: building with accelerated EC algorithms (ECDSA, ECDH, ECJPAKE), therefore
-#      excluding their built-in implementation as well as ECP_C & ECP_LIGHT
-# - 0: include built-in implementation of EC algorithms.
-#
-# PK_C and RSA_C are always disabled to ensure there is no remaining dependency
-# on the ECP module.
-config_psa_crypto_no_ecp_at_all () {
-    driver_only="$1"
-    # start with full config for maximum coverage (also enables USE_PSA)
-    helper_libtestdriver1_adjust_config "full"
-
-    if [ "$driver_only" -eq 1 ]; then
-        # Disable modules that are accelerated
-        scripts/config.py unset MBEDTLS_ECDSA_C
-        scripts/config.py unset MBEDTLS_ECDH_C
-        scripts/config.py unset MBEDTLS_ECJPAKE_C
-        # Disable ECP module (entirely)
-        scripts/config.py unset MBEDTLS_ECP_C
-    fi
-
-    # Disable all the features that auto-enable ECP_LIGHT (see build_info.h)
-    scripts/config.py unset MBEDTLS_PK_PARSE_EC_EXTENDED
-    scripts/config.py unset MBEDTLS_PK_PARSE_EC_COMPRESSED
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE
-
-    # Restartable feature is not yet supported by PSA. Once it will in
-    # the future, the following line could be removed (see issues
-    # 6061, 6332 and following ones)
-    scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
-}
-
-# Build and test a configuration where driver accelerates all EC algs while
-# all support and dependencies from ECP and ECP_LIGHT are removed on the library
-# side.
-#
-# Keep in sync with component_test_psa_crypto_config_reference_ecc_no_ecp_at_all()
-component_test_psa_crypto_config_accel_ecc_no_ecp_at_all () {
-    msg "build: full + accelerated EC algs - ECP"
-
-    # Algorithms and key types to accelerate
-    loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \
-                    ALG_ECDH \
-                    ALG_JPAKE \
-                    $(helper_get_psa_key_type_list "ECC") \
-                    $(helper_get_psa_curve_list)"
-
-    # Configure
-    # ---------
-
-    # Set common configurations between library's and driver's builds
-    config_psa_crypto_no_ecp_at_all 1
-    # Disable all the builtin curves. All the required algs are accelerated.
-    helper_disable_builtin_curves
-
-    # Build
-    # -----
-
-    # Things we wanted supported in libtestdriver1, but not accelerated in the main library:
-    # SHA-1 and all SHA-2/3 variants, as they are used by ECDSA deterministic.
-    loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
-                    ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
-
-    helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
-
-    helper_libtestdriver1_make_main "$loc_accel_list"
-
-    # Make sure any built-in EC alg was not re-enabled by accident (additive config)
-    not grep mbedtls_ecdsa_ library/ecdsa.o
-    not grep mbedtls_ecdh_ library/ecdh.o
-    not grep mbedtls_ecjpake_ library/ecjpake.o
-    # Also ensure that ECP module was not re-enabled
-    not grep mbedtls_ecp_ library/ecp.o
-
-    # Run the tests
-    # -------------
-
-    msg "test: full + accelerated EC algs - ECP"
-    make test
-
-    msg "ssl-opt: full + accelerated EC algs - ECP"
-    tests/ssl-opt.sh
-}
-
-# Reference function used for driver's coverage analysis in analyze_outcomes.py
-# in conjunction with component_test_psa_crypto_config_accel_ecc_no_ecp_at_all().
-# Keep in sync with its accelerated counterpart.
-component_test_psa_crypto_config_reference_ecc_no_ecp_at_all () {
-    msg "build: full + non accelerated EC algs"
-
-    config_psa_crypto_no_ecp_at_all 0
-
-    make
-
-    msg "test: full + non accelerated EC algs"
-    make test
-
-    msg "ssl-opt: full + non accelerated EC algs"
-    tests/ssl-opt.sh
-}
-
-# This is a common configuration helper used directly from:
-# - common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum
-# - common_test_psa_crypto_config_reference_ecc_ffdh_no_bignum
-# and indirectly from:
-# - component_test_psa_crypto_config_accel_ecc_no_bignum
-#       - accelerate all EC algs, disable RSA and FFDH
-# - component_test_psa_crypto_config_reference_ecc_no_bignum
-#       - this is the reference component of the above
-#       - it still disables RSA and FFDH, but it uses builtin EC algs
-# - component_test_psa_crypto_config_accel_ecc_ffdh_no_bignum
-#       - accelerate all EC and FFDH algs, disable only RSA
-# - component_test_psa_crypto_config_reference_ecc_ffdh_no_bignum
-#       - this is the reference component of the above
-#       - it still disables RSA, but it uses builtin EC and FFDH algs
-#
-# This function accepts 2 parameters:
-# $1: a boolean value which states if we are testing an accelerated scenario
-#     or not.
-# $2: a string value which states which components are tested. Allowed values
-#     are "ECC" or "ECC_DH".
-config_psa_crypto_config_accel_ecc_ffdh_no_bignum () {
-    driver_only="$1"
-    test_target="$2"
-    # start with full config for maximum coverage (also enables USE_PSA)
-    helper_libtestdriver1_adjust_config "full"
-
-    if [ "$driver_only" -eq 1 ]; then
-        # Disable modules that are accelerated
-        scripts/config.py unset MBEDTLS_ECDSA_C
-        scripts/config.py unset MBEDTLS_ECDH_C
-        scripts/config.py unset MBEDTLS_ECJPAKE_C
-        # Disable ECP module (entirely)
-        scripts/config.py unset MBEDTLS_ECP_C
-        # Also disable bignum
-        scripts/config.py unset MBEDTLS_BIGNUM_C
-    fi
-
-    # Disable all the features that auto-enable ECP_LIGHT (see build_info.h)
-    scripts/config.py unset MBEDTLS_PK_PARSE_EC_EXTENDED
-    scripts/config.py unset MBEDTLS_PK_PARSE_EC_COMPRESSED
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE
-
-    # RSA support is intentionally disabled on this test because RSA_C depends
-    # on BIGNUM_C.
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset-all "PSA_WANT_KEY_TYPE_RSA_[0-9A-Z_a-z]*"
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset-all "PSA_WANT_ALG_RSA_[0-9A-Z_a-z]*"
-    scripts/config.py unset MBEDTLS_RSA_C
-    scripts/config.py unset MBEDTLS_PKCS1_V15
-    scripts/config.py unset MBEDTLS_PKCS1_V21
-    scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
-    # Also disable key exchanges that depend on RSA
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
-
-    if [ "$test_target" = "ECC" ]; then
-        # When testing ECC only, we disable FFDH support, both from builtin and
-        # PSA sides, and also disable the key exchanges that depend on DHM.
-        scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_FFDH
-        scripts/config.py -f "$CRYPTO_CONFIG_H" unset-all "PSA_WANT_KEY_TYPE_DH_[0-9A-Z_a-z]*"
-        scripts/config.py -f "$CRYPTO_CONFIG_H" unset-all "PSA_WANT_DH_RFC7919_[0-9]*"
-        scripts/config.py unset MBEDTLS_DHM_C
-        scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
-        scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
-    else
-        # When testing ECC and DH instead, we disable DHM and depending key
-        # exchanges only in the accelerated build
-        if [ "$driver_only" -eq 1 ]; then
-            scripts/config.py unset MBEDTLS_DHM_C
-            scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
-            scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
-        fi
-    fi
-
-    # Restartable feature is not yet supported by PSA. Once it will in
-    # the future, the following line could be removed (see issues
-    # 6061, 6332 and following ones)
-    scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
-}
-
-# Common helper used by:
-# - component_test_psa_crypto_config_accel_ecc_no_bignum
-# - component_test_psa_crypto_config_accel_ecc_ffdh_no_bignum
-#
-# The goal is to build and test accelerating either:
-# - ECC only or
-# - both ECC and FFDH
-#
-# It is meant to be used in conjunction with
-# common_test_psa_crypto_config_reference_ecc_ffdh_no_bignum() for drivers
-# coverage analysis in the "analyze_outcomes.py" script.
-common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum () {
-    test_target="$1"
-
-    # This is an internal helper to simplify text message handling
-    if [ "$test_target" = "ECC_DH" ]; then
-        accel_text="ECC/FFDH"
-        removed_text="ECP - DH"
-    else
-        accel_text="ECC"
-        removed_text="ECP"
-    fi
-
-    msg "build: full + accelerated $accel_text algs + USE_PSA - $removed_text - BIGNUM"
-
-    # By default we accelerate all EC keys/algs
-    loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \
-                    ALG_ECDH \
-                    ALG_JPAKE \
-                    $(helper_get_psa_key_type_list "ECC") \
-                    $(helper_get_psa_curve_list)"
-    # Optionally we can also add DH to the list of accelerated items
-    if [ "$test_target" = "ECC_DH" ]; then
-        loc_accel_list="$loc_accel_list \
-                        ALG_FFDH \
-                        $(helper_get_psa_key_type_list "DH") \
-                        $(helper_get_psa_dh_group_list)"
-    fi
-
-    # Configure
-    # ---------
-
-    # Set common configurations between library's and driver's builds
-    config_psa_crypto_config_accel_ecc_ffdh_no_bignum 1 "$test_target"
-    # Disable all the builtin curves. All the required algs are accelerated.
-    helper_disable_builtin_curves
-
-    # Build
-    # -----
-
-    # Things we wanted supported in libtestdriver1, but not accelerated in the main library:
-    # SHA-1 and all SHA-2/3 variants, as they are used by ECDSA deterministic.
-    loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
-                    ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
-
-    helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
-
-    helper_libtestdriver1_make_main "$loc_accel_list"
-
-    # Make sure any built-in EC alg was not re-enabled by accident (additive config)
-    not grep mbedtls_ecdsa_ library/ecdsa.o
-    not grep mbedtls_ecdh_ library/ecdh.o
-    not grep mbedtls_ecjpake_ library/ecjpake.o
-    # Also ensure that ECP, RSA, [DHM] or BIGNUM modules were not re-enabled
-    not grep mbedtls_ecp_ library/ecp.o
-    not grep mbedtls_rsa_ library/rsa.o
-    not grep mbedtls_mpi_ library/bignum.o
-    not grep mbedtls_dhm_ library/dhm.o
-
-    # Run the tests
-    # -------------
-
-    msg "test suites: full + accelerated $accel_text algs + USE_PSA - $removed_text - DHM - BIGNUM"
-
-    make test
-
-    msg "ssl-opt: full + accelerated $accel_text algs + USE_PSA - $removed_text - BIGNUM"
-    tests/ssl-opt.sh
-}
-
-# Common helper used by:
-# - component_test_psa_crypto_config_reference_ecc_no_bignum
-# - component_test_psa_crypto_config_reference_ecc_ffdh_no_bignum
-#
-# The goal is to build and test a reference scenario (i.e. with builtin
-# components) compared to the ones used in
-# common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum() above.
-#
-# It is meant to be used in conjunction with
-# common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum() for drivers'
-# coverage analysis in "analyze_outcomes.py" script.
-common_test_psa_crypto_config_reference_ecc_ffdh_no_bignum () {
-    test_target="$1"
-
-    # This is an internal helper to simplify text message handling
-    if [ "$test_target" = "ECC_DH" ]; then
-        accel_text="ECC/FFDH"
-    else
-        accel_text="ECC"
-    fi
-
-    msg "build: full + non accelerated $accel_text algs + USE_PSA"
-
-    config_psa_crypto_config_accel_ecc_ffdh_no_bignum 0 "$test_target"
-
-    make
-
-    msg "test suites: full + non accelerated EC algs + USE_PSA"
-    make test
-
-    msg "ssl-opt: full + non accelerated $accel_text algs + USE_PSA"
-    tests/ssl-opt.sh
-}
-
-component_test_psa_crypto_config_accel_ecc_no_bignum () {
-    common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum "ECC"
-}
-
-component_test_psa_crypto_config_reference_ecc_no_bignum () {
-    common_test_psa_crypto_config_reference_ecc_ffdh_no_bignum "ECC"
-}
-
-component_test_psa_crypto_config_accel_ecc_ffdh_no_bignum () {
-    common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum "ECC_DH"
-}
-
-component_test_psa_crypto_config_reference_ecc_ffdh_no_bignum () {
-    common_test_psa_crypto_config_reference_ecc_ffdh_no_bignum "ECC_DH"
-}
-
-# Helper for setting common configurations between:
-# - component_test_tfm_config_p256m_driver_accel_ec()
-# - component_test_tfm_config()
-common_tfm_config () {
-    # Enable TF-M config
-    cp configs/config-tfm.h "$CONFIG_H"
-    echo "#undef MBEDTLS_PSA_CRYPTO_CONFIG_FILE" >> "$CONFIG_H"
-    cp configs/ext/crypto_config_profile_medium.h "$CRYPTO_CONFIG_H"
-
-    # Other config adjustment to make the tests pass.
-    # This should probably be adopted upstream.
-    #
-    # - USE_PSA_CRYPTO for PK_HAVE_ECC_KEYS
-    echo "#define MBEDTLS_USE_PSA_CRYPTO" >> "$CONFIG_H"
-
-    # Config adjustment for better test coverage in our environment.
-    # This is not needed just to build and pass tests.
-    #
-    # Enable filesystem I/O for the benefit of PK parse/write tests.
-    echo "#define MBEDTLS_FS_IO" >> "$CONFIG_H"
-}
-
-# Keep this in sync with component_test_tfm_config() as they are both meant
-# to be used in analyze_outcomes.py for driver's coverage analysis.
-component_test_tfm_config_p256m_driver_accel_ec () {
-    msg "build: TF-M config + p256m driver + accel ECDH(E)/ECDSA"
-
-    common_tfm_config
-
-    # Build crypto library
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -I../tests/include/spe" LDFLAGS="$ASAN_CFLAGS"
-
-    # Make sure any built-in EC alg was not re-enabled by accident (additive config)
-    not grep mbedtls_ecdsa_ library/ecdsa.o
-    not grep mbedtls_ecdh_ library/ecdh.o
-    not grep mbedtls_ecjpake_ library/ecjpake.o
-    # Also ensure that ECP, RSA, DHM or BIGNUM modules were not re-enabled
-    not grep mbedtls_ecp_ library/ecp.o
-    not grep mbedtls_rsa_ library/rsa.o
-    not grep mbedtls_dhm_ library/dhm.o
-    not grep mbedtls_mpi_ library/bignum.o
-    # Check that p256m was built
-    grep -q p256_ecdsa_ library/libmbedcrypto.a
-
-    # In "config-tfm.h" we disabled CIPHER_C tweaking TF-M's configuration
-    # files, so we want to ensure that it has not be re-enabled accidentally.
-    not grep mbedtls_cipher library/cipher.o
-
-    # Run the tests
-    msg "test: TF-M config + p256m driver + accel ECDH(E)/ECDSA"
-    make test
-}
-
-# Keep this in sync with component_test_tfm_config_p256m_driver_accel_ec() as
-# they are both meant to be used in analyze_outcomes.py for driver's coverage
-# analysis.
-component_test_tfm_config () {
-    common_tfm_config
-
-    # Disable P256M driver, which is on by default, so that analyze_outcomes
-    # can compare this test with test_tfm_config_p256m_driver_accel_ec
-    echo "#undef MBEDTLS_PSA_P256M_DRIVER_ENABLED" >> "$CONFIG_H"
-
-    msg "build: TF-M config"
-    make CFLAGS='-Werror -Wall -Wextra -I../tests/include/spe' tests
-
-    # Check that p256m was not built
-    not grep p256_ecdsa_ library/libmbedcrypto.a
-
-    # In "config-tfm.h" we disabled CIPHER_C tweaking TF-M's configuration
-    # files, so we want to ensure that it has not be re-enabled accidentally.
-    not grep mbedtls_cipher library/cipher.o
-
-    msg "test: TF-M config"
-    make test
-}
-
-# Common helper for component_full_without_ecdhe_ecdsa() and
-# component_full_without_ecdhe_ecdsa_and_tls13() which:
-# - starts from the "full" configuration minus the list of symbols passed in
-#   as 1st parameter
-# - build
-# - test only TLS (i.e. test_suite_tls and ssl-opt)
-build_full_minus_something_and_test_tls () {
-    symbols_to_disable="$1"
-
-    msg "build: full minus something, test TLS"
-
-    scripts/config.py full
-    for sym in $symbols_to_disable; do
-        echo "Disabling $sym"
-        scripts/config.py unset $sym
-    done
-
-    make
-
-    msg "test: full minus something, test TLS"
-    ( cd tests; ./test_suite_ssl )
-
-    msg "ssl-opt: full minus something, test TLS"
-    tests/ssl-opt.sh
-}
-
-component_full_without_ecdhe_ecdsa () {
-    build_full_minus_something_and_test_tls "MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED"
-}
-
-component_full_without_ecdhe_ecdsa_and_tls13 () {
-    build_full_minus_something_and_test_tls "MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
-                                             MBEDTLS_SSL_PROTO_TLS1_3"
-}
-
-# This is an helper used by:
-# - component_test_psa_ecc_key_pair_no_derive
-# - component_test_psa_ecc_key_pair_no_generate
-# The goal is to test with all PSA_WANT_KEY_TYPE_xxx_KEY_PAIR_yyy symbols
-# enabled, but one. Input arguments are as follows:
-# - $1 is the key type under test, i.e. ECC/RSA/DH
-# - $2 is the key option to be unset (i.e. generate, derive, etc)
-build_and_test_psa_want_key_pair_partial () {
-    key_type=$1
-    unset_option=$2
-    disabled_psa_want="PSA_WANT_KEY_TYPE_${key_type}_KEY_PAIR_${unset_option}"
-
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO - ${disabled_psa_want}"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-
-    # All the PSA_WANT_KEY_TYPE_xxx_KEY_PAIR_yyy are enabled by default in
-    # crypto_config.h so we just disable the one we don't want.
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset "$disabled_psa_want"
-
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
-
-    msg "test: full - MBEDTLS_USE_PSA_CRYPTO - ${disabled_psa_want}"
-    make test
-}
-
-component_test_psa_ecc_key_pair_no_derive () {
-    build_and_test_psa_want_key_pair_partial "ECC" "DERIVE"
-}
-
-component_test_psa_ecc_key_pair_no_generate () {
-    build_and_test_psa_want_key_pair_partial "ECC" "GENERATE"
-}
-
-config_psa_crypto_accel_rsa () {
-    driver_only=$1
-
-    # Start from crypto_full config (no X.509, no TLS)
-    helper_libtestdriver1_adjust_config "crypto_full"
-
-    if [ "$driver_only" -eq 1 ]; then
-        # Remove RSA support and its dependencies
-        scripts/config.py unset MBEDTLS_RSA_C
-        scripts/config.py unset MBEDTLS_PKCS1_V15
-        scripts/config.py unset MBEDTLS_PKCS1_V21
-
-        # We need PEM parsing in the test library as well to support the import
-        # of PEM encoded RSA keys.
-        scripts/config.py -f "$CONFIG_TEST_DRIVER_H" set MBEDTLS_PEM_PARSE_C
-        scripts/config.py -f "$CONFIG_TEST_DRIVER_H" set MBEDTLS_BASE64_C
-    fi
-}
-
-component_test_psa_crypto_config_accel_rsa_crypto () {
-    msg "build: crypto_full with accelerated RSA"
-
-    loc_accel_list="ALG_RSA_OAEP ALG_RSA_PSS \
-                    ALG_RSA_PKCS1V15_CRYPT ALG_RSA_PKCS1V15_SIGN \
-                    KEY_TYPE_RSA_PUBLIC_KEY \
-                    KEY_TYPE_RSA_KEY_PAIR_BASIC \
-                    KEY_TYPE_RSA_KEY_PAIR_GENERATE \
-                    KEY_TYPE_RSA_KEY_PAIR_IMPORT \
-                    KEY_TYPE_RSA_KEY_PAIR_EXPORT"
-
-    # Configure
-    # ---------
-
-    config_psa_crypto_accel_rsa 1
-
-    # Build
-    # -----
-
-    # These hashes are needed for unit tests.
-    loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
-                    ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512 ALG_MD5"
-    helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
-
-    helper_libtestdriver1_make_main "$loc_accel_list"
-
-    # Make sure this was not re-enabled by accident (additive config)
-    not grep mbedtls_rsa library/rsa.o
-
-    # Run the tests
-    # -------------
-
-    msg "test: crypto_full with accelerated RSA"
-    make test
-}
-
-component_test_psa_crypto_config_reference_rsa_crypto () {
-    msg "build: crypto_full with non-accelerated RSA"
-
-    # Configure
-    # ---------
-    config_psa_crypto_accel_rsa 0
-
-    # Build
-    # -----
-    make
-
-    # Run the tests
-    # -------------
-    msg "test: crypto_full with non-accelerated RSA"
-    make test
-}
-
-# This is a temporary test to verify that full RSA support is present even when
-# only one single new symbols (PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC) is defined.
-component_test_new_psa_want_key_pair_symbol () {
-    msg "Build: crypto config - MBEDTLS_RSA_C + PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC"
-
-    # Create a temporary output file unless there is already one set
-    if [ "$MBEDTLS_TEST_OUTCOME_FILE" ]; then
-        REMOVE_OUTCOME_ON_EXIT="no"
-    else
-        REMOVE_OUTCOME_ON_EXIT="yes"
-        MBEDTLS_TEST_OUTCOME_FILE="$PWD/out.csv"
-        export MBEDTLS_TEST_OUTCOME_FILE
-    fi
-
-    # Start from crypto configuration
-    scripts/config.py crypto
-
-    # Remove RSA support and its dependencies
-    scripts/config.py unset MBEDTLS_PKCS1_V15
-    scripts/config.py unset MBEDTLS_PKCS1_V21
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
-    scripts/config.py unset MBEDTLS_RSA_C
-    scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
-
-    # Enable PSA support
-    scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
-
-    # Keep only PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC enabled in order to ensure
-    # that proper translations is done in crypto_legacy.h.
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_IMPORT
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_EXPORT
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE
-
-    make
-
-    msg "Test: crypto config - MBEDTLS_RSA_C + PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC"
-    make test
-
-    # Parse only 1 relevant line from the outcome file, i.e. a test which is
-    # performing RSA signature.
-    msg "Verify that 'RSA PKCS1 Sign #1 (SHA512, 1536 bits RSA)' is PASS"
-    cat $MBEDTLS_TEST_OUTCOME_FILE | grep 'RSA PKCS1 Sign #1 (SHA512, 1536 bits RSA)' | grep -q "PASS"
-
-    if [ "$REMOVE_OUTCOME_ON_EXIT" == "yes" ]; then
-        rm $MBEDTLS_TEST_OUTCOME_FILE
-    fi
-}
-
-component_test_psa_crypto_config_accel_hash () {
-    msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated hash"
-
-    loc_accel_list="ALG_MD5 ALG_RIPEMD160 ALG_SHA_1 \
-                    ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
-                    ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
-
-    # Configure
-    # ---------
-
-    # Start from default config (no USE_PSA)
-    helper_libtestdriver1_adjust_config "default"
-
-    # Disable the things that are being accelerated
-    scripts/config.py unset MBEDTLS_MD5_C
-    scripts/config.py unset MBEDTLS_RIPEMD160_C
-    scripts/config.py unset MBEDTLS_SHA1_C
-    scripts/config.py unset MBEDTLS_SHA224_C
-    scripts/config.py unset MBEDTLS_SHA256_C
-    scripts/config.py unset MBEDTLS_SHA384_C
-    scripts/config.py unset MBEDTLS_SHA512_C
-    scripts/config.py unset MBEDTLS_SHA3_C
-
-    # Build
-    # -----
-
-    helper_libtestdriver1_make_drivers "$loc_accel_list"
-
-    helper_libtestdriver1_make_main "$loc_accel_list"
-
-    # There's a risk of something getting re-enabled via config_psa.h;
-    # make sure it did not happen. Note: it's OK for MD_C to be enabled.
-    not grep mbedtls_md5 library/md5.o
-    not grep mbedtls_sha1 library/sha1.o
-    not grep mbedtls_sha256 library/sha256.o
-    not grep mbedtls_sha512 library/sha512.o
-    not grep mbedtls_ripemd160 library/ripemd160.o
-
-    # Run the tests
-    # -------------
-
-    msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated hash"
-    make test
-}
-
-component_test_psa_crypto_config_accel_hash_keep_builtins () {
-    msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated+builtin hash"
-    # This component ensures that all the test cases for
-    # md_psa_dynamic_dispatch with legacy+driver in test_suite_md are run.
-
-    loc_accel_list="ALG_MD5 ALG_RIPEMD160 ALG_SHA_1 \
-                    ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
-                    ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
-
-    # Start from default config (no USE_PSA)
-    helper_libtestdriver1_adjust_config "default"
-
-    helper_libtestdriver1_make_drivers "$loc_accel_list"
-
-    helper_libtestdriver1_make_main "$loc_accel_list"
-
-    msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated+builtin hash"
-    make test
-}
-
-# Auxiliary function to build config for hashes with and without drivers
-config_psa_crypto_hash_use_psa () {
-    driver_only="$1"
-    # start with config full for maximum coverage (also enables USE_PSA)
-    helper_libtestdriver1_adjust_config "full"
-    if [ "$driver_only" -eq 1 ]; then
-        # disable the built-in implementation of hashes
-        scripts/config.py unset MBEDTLS_MD5_C
-        scripts/config.py unset MBEDTLS_RIPEMD160_C
-        scripts/config.py unset MBEDTLS_SHA1_C
-        scripts/config.py unset MBEDTLS_SHA224_C
-        scripts/config.py unset MBEDTLS_SHA256_C # see external RNG below
-        scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
-        scripts/config.py unset MBEDTLS_SHA384_C
-        scripts/config.py unset MBEDTLS_SHA512_C
-        scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT
-        scripts/config.py unset MBEDTLS_SHA3_C
-    fi
-}
-
-# Note that component_test_psa_crypto_config_reference_hash_use_psa
-# is related to this component and both components need to be kept in sync.
-# For details please see comments for component_test_psa_crypto_config_reference_hash_use_psa.
-component_test_psa_crypto_config_accel_hash_use_psa () {
-    msg "test: full with accelerated hashes"
-
-    loc_accel_list="ALG_MD5 ALG_RIPEMD160 ALG_SHA_1 \
-                    ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
-                    ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
-
-    # Configure
-    # ---------
-
-    config_psa_crypto_hash_use_psa 1
-
-    # Build
-    # -----
-
-    helper_libtestdriver1_make_drivers "$loc_accel_list"
-
-    helper_libtestdriver1_make_main "$loc_accel_list"
-
-    # There's a risk of something getting re-enabled via config_psa.h;
-    # make sure it did not happen. Note: it's OK for MD_C to be enabled.
-    not grep mbedtls_md5 library/md5.o
-    not grep mbedtls_sha1 library/sha1.o
-    not grep mbedtls_sha256 library/sha256.o
-    not grep mbedtls_sha512 library/sha512.o
-    not grep mbedtls_ripemd160 library/ripemd160.o
-
-    # Run the tests
-    # -------------
-
-    msg "test: full with accelerated hashes"
-    make test
-
-    # This is mostly useful so that we can later compare outcome files with
-    # the reference config in analyze_outcomes.py, to check that the
-    # dependency declarations in ssl-opt.sh and in TLS code are correct.
-    msg "test: ssl-opt.sh, full with accelerated hashes"
-    tests/ssl-opt.sh
-
-    # This is to make sure all ciphersuites are exercised, but we don't need
-    # interop testing (besides, we already got some from ssl-opt.sh).
-    msg "test: compat.sh, full with accelerated hashes"
-    tests/compat.sh -p mbedTLS -V YES
-}
-
-# This component provides reference configuration for test_psa_crypto_config_accel_hash_use_psa
-# without accelerated hash. The outcome from both components are used by the analyze_outcomes.py
-# script to find regression in test coverage when accelerated hash is used (tests and ssl-opt).
-# Both components need to be kept in sync.
-component_test_psa_crypto_config_reference_hash_use_psa () {
-    msg "test: full without accelerated hashes"
-
-    config_psa_crypto_hash_use_psa 0
-
-    make
-
-    msg "test: full without accelerated hashes"
-    make test
-
-    msg "test: ssl-opt.sh, full without accelerated hashes"
-    tests/ssl-opt.sh
-}
-
-# Auxiliary function to build config for hashes with and without drivers
-config_psa_crypto_hmac_use_psa () {
-    driver_only="$1"
-    # start with config full for maximum coverage (also enables USE_PSA)
-    helper_libtestdriver1_adjust_config "full"
-
-    if [ "$driver_only" -eq 1 ]; then
-        # Disable MD_C in order to disable the builtin support for HMAC. MD_LIGHT
-        # is still enabled though (for ENTROPY_C among others).
-        scripts/config.py unset MBEDTLS_MD_C
-        # Disable also the builtin hashes since they are supported by the driver
-        # and MD module is able to perform PSA dispathing.
-        scripts/config.py unset-all MBEDTLS_SHA
-        scripts/config.py unset MBEDTLS_MD5_C
-        scripts/config.py unset MBEDTLS_RIPEMD160_C
-    fi
-
-    # Direct dependencies of MD_C. We disable them also in the reference
-    # component to work with the same set of features.
-    scripts/config.py unset MBEDTLS_PKCS7_C
-    scripts/config.py unset MBEDTLS_PKCS5_C
-    scripts/config.py unset MBEDTLS_HMAC_DRBG_C
-    scripts/config.py unset MBEDTLS_HKDF_C
-    # Dependencies of HMAC_DRBG
-    scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_DETERMINISTIC_ECDSA
-}
-
-component_test_psa_crypto_config_accel_hmac () {
-    msg "test: full with accelerated hmac"
-
-    loc_accel_list="ALG_HMAC KEY_TYPE_HMAC \
-                    ALG_MD5 ALG_RIPEMD160 ALG_SHA_1 \
-                    ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
-                    ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
-
-    # Configure
-    # ---------
-
-    config_psa_crypto_hmac_use_psa 1
-
-    # Build
-    # -----
-
-    helper_libtestdriver1_make_drivers "$loc_accel_list"
-
-    helper_libtestdriver1_make_main "$loc_accel_list"
-
-    # Ensure that built-in support for HMAC is disabled.
-    not grep mbedtls_md_hmac library/md.o
-
-    # Run the tests
-    # -------------
-
-    msg "test: full with accelerated hmac"
-    make test
-}
-
-component_test_psa_crypto_config_reference_hmac () {
-    msg "test: full without accelerated hmac"
-
-    config_psa_crypto_hmac_use_psa 0
-
-    make
-
-    msg "test: full without accelerated hmac"
-    make test
-}
-
-component_test_psa_crypto_config_accel_des () {
-    msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated DES"
-
-    # Albeit this components aims at accelerating DES which should only support
-    # CBC and ECB modes, we need to accelerate more than that otherwise DES_C
-    # would automatically be re-enabled by "config_adjust_legacy_from_psa.c"
-    loc_accel_list="ALG_ECB_NO_PADDING ALG_CBC_NO_PADDING ALG_CBC_PKCS7 \
-                    ALG_CTR ALG_CFB ALG_OFB ALG_XTS ALG_CMAC \
-                    KEY_TYPE_DES"
-
-    # Note: we cannot accelerate all ciphers' key types otherwise we would also
-    # have to either disable CCM/GCM or accelerate them, but that's out of scope
-    # of this component. This limitation will be addressed by #8598.
-
-    # Configure
-    # ---------
-
-    # Start from the full config
-    helper_libtestdriver1_adjust_config "full"
-
-    # Disable the things that are being accelerated
-    scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
-    scripts/config.py unset MBEDTLS_CIPHER_PADDING_PKCS7
-    scripts/config.py unset MBEDTLS_CIPHER_MODE_CTR
-    scripts/config.py unset MBEDTLS_CIPHER_MODE_CFB
-    scripts/config.py unset MBEDTLS_CIPHER_MODE_OFB
-    scripts/config.py unset MBEDTLS_CIPHER_MODE_XTS
-    scripts/config.py unset MBEDTLS_DES_C
-    scripts/config.py unset MBEDTLS_CMAC_C
-
-    # Build
-    # -----
-
-    helper_libtestdriver1_make_drivers "$loc_accel_list"
-
-    helper_libtestdriver1_make_main "$loc_accel_list"
-
-    # Make sure this was not re-enabled by accident (additive config)
-    not grep mbedtls_des* library/des.o
-
-    # Run the tests
-    # -------------
-
-    msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated DES"
-    make test
-}
-
-component_test_psa_crypto_config_accel_aead () {
-    msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated AEAD"
-
-    loc_accel_list="ALG_GCM ALG_CCM ALG_CHACHA20_POLY1305 \
-                    KEY_TYPE_AES KEY_TYPE_CHACHA20 KEY_TYPE_ARIA KEY_TYPE_CAMELLIA"
-
-    # Configure
-    # ---------
-
-    # Start from full config
-    helper_libtestdriver1_adjust_config "full"
-
-    # Disable things that are being accelerated
-    scripts/config.py unset MBEDTLS_GCM_C
-    scripts/config.py unset MBEDTLS_CCM_C
-    scripts/config.py unset MBEDTLS_CHACHAPOLY_C
-
-    # Disable CCM_STAR_NO_TAG because this re-enables CCM_C.
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CCM_STAR_NO_TAG
-
-    # Build
-    # -----
-
-    helper_libtestdriver1_make_drivers "$loc_accel_list"
-
-    helper_libtestdriver1_make_main "$loc_accel_list"
-
-    # Make sure this was not re-enabled by accident (additive config)
-    not grep mbedtls_ccm library/ccm.o
-    not grep mbedtls_gcm library/gcm.o
-    not grep mbedtls_chachapoly library/chachapoly.o
-
-    # Run the tests
-    # -------------
-
-    msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated AEAD"
-    make test
-}
-
-# This is a common configuration function used in:
-# - component_test_psa_crypto_config_accel_cipher_aead_cmac
-# - component_test_psa_crypto_config_reference_cipher_aead_cmac
-common_psa_crypto_config_accel_cipher_aead_cmac () {
-    # Start from the full config
-    helper_libtestdriver1_adjust_config "full"
-
-    scripts/config.py unset MBEDTLS_NIST_KW_C
-}
-
-# The 2 following test components, i.e.
-# - component_test_psa_crypto_config_accel_cipher_aead_cmac
-# - component_test_psa_crypto_config_reference_cipher_aead_cmac
-# are meant to be used together in analyze_outcomes.py script in order to test
-# driver's coverage for ciphers and AEADs.
-component_test_psa_crypto_config_accel_cipher_aead_cmac () {
-    msg "build: full config with accelerated cipher inc. AEAD and CMAC"
-
-    loc_accel_list="ALG_ECB_NO_PADDING ALG_CBC_NO_PADDING ALG_CBC_PKCS7 ALG_CTR ALG_CFB \
-                    ALG_OFB ALG_XTS ALG_STREAM_CIPHER ALG_CCM_STAR_NO_TAG \
-                    ALG_GCM ALG_CCM ALG_CHACHA20_POLY1305 ALG_CMAC \
-                    KEY_TYPE_DES KEY_TYPE_AES KEY_TYPE_ARIA KEY_TYPE_CHACHA20 KEY_TYPE_CAMELLIA"
-
-    # Configure
-    # ---------
-
-    common_psa_crypto_config_accel_cipher_aead_cmac
-
-    # Disable the things that are being accelerated
-    scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
-    scripts/config.py unset MBEDTLS_CIPHER_PADDING_PKCS7
-    scripts/config.py unset MBEDTLS_CIPHER_MODE_CTR
-    scripts/config.py unset MBEDTLS_CIPHER_MODE_CFB
-    scripts/config.py unset MBEDTLS_CIPHER_MODE_OFB
-    scripts/config.py unset MBEDTLS_CIPHER_MODE_XTS
-    scripts/config.py unset MBEDTLS_GCM_C
-    scripts/config.py unset MBEDTLS_CCM_C
-    scripts/config.py unset MBEDTLS_CHACHAPOLY_C
-    scripts/config.py unset MBEDTLS_CMAC_C
-    scripts/config.py unset MBEDTLS_DES_C
-    scripts/config.py unset MBEDTLS_AES_C
-    scripts/config.py unset MBEDTLS_ARIA_C
-    scripts/config.py unset MBEDTLS_CHACHA20_C
-    scripts/config.py unset MBEDTLS_CAMELLIA_C
-
-    # Disable CIPHER_C entirely as all ciphers/AEADs are accelerated and PSA
-    # does not depend on it.
-    scripts/config.py unset MBEDTLS_CIPHER_C
-
-    # Build
-    # -----
-
-    helper_libtestdriver1_make_drivers "$loc_accel_list"
-
-    helper_libtestdriver1_make_main "$loc_accel_list"
-
-    # Make sure this was not re-enabled by accident (additive config)
-    not grep mbedtls_cipher library/cipher.o
-    not grep mbedtls_des library/des.o
-    not grep mbedtls_aes library/aes.o
-    not grep mbedtls_aria library/aria.o
-    not grep mbedtls_camellia library/camellia.o
-    not grep mbedtls_ccm library/ccm.o
-    not grep mbedtls_gcm library/gcm.o
-    not grep mbedtls_chachapoly library/chachapoly.o
-    not grep mbedtls_cmac library/cmac.o
-
-    # Run the tests
-    # -------------
-
-    msg "test: full config with accelerated cipher inc. AEAD and CMAC"
-    make test
-
-    msg "ssl-opt: full config with accelerated cipher inc. AEAD and CMAC"
-    tests/ssl-opt.sh
-
-    msg "compat.sh: full config with accelerated cipher inc. AEAD and CMAC"
-    tests/compat.sh -V NO -p mbedTLS
-}
-
-component_test_psa_crypto_config_reference_cipher_aead_cmac () {
-    msg "build: full config with non-accelerated cipher inc. AEAD and CMAC"
-    common_psa_crypto_config_accel_cipher_aead_cmac
-
-    make
-
-    msg "test: full config with non-accelerated cipher inc. AEAD and CMAC"
-    make test
-
-    msg "ssl-opt: full config with non-accelerated cipher inc. AEAD and CMAC"
-    tests/ssl-opt.sh
-
-    msg "compat.sh: full config with non-accelerated cipher inc. AEAD and CMAC"
-    tests/compat.sh -V NO -p mbedTLS
-}
-
-common_block_cipher_dispatch () {
-    TEST_WITH_DRIVER="$1"
-
-    # Start from the full config
-    helper_libtestdriver1_adjust_config "full"
-
-    if [ "$TEST_WITH_DRIVER" -eq 1 ]; then
-        # Disable key types that are accelerated (there is no legacy equivalent
-        # symbol for ECB)
-        scripts/config.py unset MBEDTLS_AES_C
-        scripts/config.py unset MBEDTLS_ARIA_C
-        scripts/config.py unset MBEDTLS_CAMELLIA_C
-    fi
-
-    # Disable cipher's modes that, when not accelerated, cause
-    # legacy key types to be re-enabled in "config_adjust_legacy_from_psa.h".
-    # Keep this also in the reference component in order to skip the same tests
-    # that were skipped in the accelerated one.
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CTR
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CFB
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_OFB
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_NO_PADDING
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_PKCS7
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CMAC
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CCM_STAR_NO_TAG
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_PBKDF2_AES_CMAC_PRF_128
-
-    # Disable direct dependency on AES_C
-    scripts/config.py unset MBEDTLS_NIST_KW_C
-
-    # Prevent the cipher module from using deprecated PSA path. The reason is
-    # that otherwise there will be tests relying on "aes_info" (defined in
-    # "cipher_wrap.c") whose functions are not available when AES_C is
-    # not defined. ARIA and Camellia are not a problem in this case because
-    # the PSA path is not tested for these key types.
-    scripts/config.py set MBEDTLS_DEPRECATED_REMOVED
-}
-
-component_test_full_block_cipher_psa_dispatch () {
-    msg "build: full + PSA dispatch in block_cipher"
-
-    loc_accel_list="ALG_ECB_NO_PADDING \
-                    KEY_TYPE_AES KEY_TYPE_ARIA KEY_TYPE_CAMELLIA"
-
-    # Configure
-    # ---------
-
-    common_block_cipher_dispatch 1
-
-    # Build
-    # -----
-
-    helper_libtestdriver1_make_drivers "$loc_accel_list"
-
-    helper_libtestdriver1_make_main "$loc_accel_list"
-
-    # Make sure disabled components were not re-enabled by accident (additive
-    # config)
-    not grep mbedtls_aes_ library/aes.o
-    not grep mbedtls_aria_ library/aria.o
-    not grep mbedtls_camellia_ library/camellia.o
-
-    # Run the tests
-    # -------------
-
-    msg "test: full + PSA dispatch in block_cipher"
-    make test
-}
-
-# This is the reference component of component_test_full_block_cipher_psa_dispatch
-component_test_full_block_cipher_legacy_dispatch () {
-    msg "build: full + legacy dispatch in block_cipher"
-
-    common_block_cipher_dispatch 0
-
-    make
-
-    msg "test: full + legacy dispatch in block_cipher"
-    make test
-}
-
-component_test_aead_chachapoly_disabled () {
-    msg "build: full minus CHACHAPOLY"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_CHACHAPOLY_C
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CHACHA20_POLY1305
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
-
-    msg "test: full minus CHACHAPOLY"
-    make test
-}
-
-component_test_aead_only_ccm () {
-    msg "build: full minus CHACHAPOLY and GCM"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_CHACHAPOLY_C
-    scripts/config.py unset MBEDTLS_GCM_C
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CHACHA20_POLY1305
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_GCM
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
-
-    msg "test: full minus CHACHAPOLY and GCM"
-    make test
-}
-
-component_test_ccm_aes_sha256 () {
-    msg "build: CCM + AES + SHA256 configuration"
-
-    cp "$CONFIG_TEST_DRIVER_H" "$CONFIG_H"
-    cp configs/crypto-config-ccm-aes-sha256.h "$CRYPTO_CONFIG_H"
-
-    make
-
-    msg "test: CCM + AES + SHA256 configuration"
-    make test
-}
-
-# This should be renamed to test and updated once the accelerator ECDH code is in place and ready to test.
-component_build_psa_accel_alg_ecdh () {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_ECDH without MBEDTLS_ECDH_C"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py unset MBEDTLS_ECDH_C
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
-    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_ECDH -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator HMAC code is in place and ready to test.
-component_build_psa_accel_alg_hmac () {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_HMAC"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_HMAC -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator HKDF code is in place and ready to test.
-component_build_psa_accel_alg_hkdf () {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_HKDF without MBEDTLS_HKDF_C"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_HKDF_C
-    # Make sure to unset TLS1_3 since it requires HKDF_C and will not build properly without it.
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_HKDF -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator MD5 code is in place and ready to test.
-component_build_psa_accel_alg_md5 () {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_MD5 - other hashes"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS
-    scripts/config.py unset MBEDTLS_LMS_C
-    scripts/config.py unset MBEDTLS_LMS_PRIVATE
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_MD5 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator RIPEMD160 code is in place and ready to test.
-component_build_psa_accel_alg_ripemd160 () {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RIPEMD160 - other hashes"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS
-    scripts/config.py unset MBEDTLS_LMS_C
-    scripts/config.py unset MBEDTLS_LMS_PRIVATE
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RIPEMD160 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator SHA1 code is in place and ready to test.
-component_build_psa_accel_alg_sha1 () {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_1 - other hashes"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS
-    scripts/config.py unset MBEDTLS_LMS_C
-    scripts/config.py unset MBEDTLS_LMS_PRIVATE
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_1 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator SHA224 code is in place and ready to test.
-component_build_psa_accel_alg_sha224 () {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_224 - other hashes"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_224 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator SHA256 code is in place and ready to test.
-component_build_psa_accel_alg_sha256 () {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_256 - other hashes"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_256 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator SHA384 code is in place and ready to test.
-component_build_psa_accel_alg_sha384 () {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_384 - other hashes"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS
-    scripts/config.py unset MBEDTLS_LMS_C
-    scripts/config.py unset MBEDTLS_LMS_PRIVATE
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_384 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator SHA512 code is in place and ready to test.
-component_build_psa_accel_alg_sha512 () {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_512 - other hashes"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS
-    scripts/config.py unset MBEDTLS_LMS_C
-    scripts/config.py unset MBEDTLS_LMS_PRIVATE
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_512 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
-component_build_psa_accel_alg_rsa_pkcs1v15_crypt () {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_PKCS1V15_CRYPT + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PKCS1V15_CRYPT 1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_SIGN
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_OAEP
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PSS
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_PKCS1V15_CRYPT -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
-component_build_psa_accel_alg_rsa_pkcs1v15_sign () {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_PKCS1V15_SIGN + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PKCS1V15_SIGN 1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_OAEP
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PSS
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_PKCS1V15_SIGN -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
-component_build_psa_accel_alg_rsa_oaep () {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_OAEP + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_OAEP 1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_SIGN
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PSS
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_OAEP -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
-component_build_psa_accel_alg_rsa_pss () {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_PSS + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PSS 1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_SIGN
-    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_OAEP
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_PSS -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
-component_build_psa_accel_key_type_rsa_key_pair () {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_xxx + PSA_WANT_ALG_RSA_PSS"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PSS 1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC 1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_IMPORT 1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_EXPORT 1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE 1
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_KEY_PAIR -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
-component_build_psa_accel_key_type_rsa_public_key () {
-    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY + PSA_WANT_ALG_RSA_PSS"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PSS 1
-    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY 1
-    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
-    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_PUBLIC_KEY -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
-}
-
-
-support_build_tfm_armcc () {
-    support_build_armcc
-}
-
-component_build_tfm_armcc () {
-    # test the TF-M configuration can build cleanly with various warning flags enabled
-    cp configs/config-tfm.h "$CONFIG_H"
-
-    msg "build: TF-M config, armclang armv7-m thumb2"
-    armc6_build_test "--target=arm-arm-none-eabi -march=armv7-m -mthumb -Os -std=c99 -Werror -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wimplicit-fallthrough -Wshadow -Wvla -Wformat=2 -Wno-format-nonliteral -Wshadow -Wasm-operand-widths -Wunused -I../tests/include/spe"
-}
-
-component_build_tfm () {
-    # Check that the TF-M configuration can build cleanly with various
-    # warning flags enabled. We don't build or run tests, since the
-    # TF-M configuration needs a TF-M platform. A tweaked version of
-    # the configuration that works on mainstream platforms is in
-    # configs/config-tfm.h, tested via test-ref-configs.pl.
-    cp configs/config-tfm.h "$CONFIG_H"
-
-    msg "build: TF-M config, clang, armv7-m thumb2"
-    make lib CC="clang" CFLAGS="--target=arm-linux-gnueabihf -march=armv7-m -mthumb -Os -std=c99 -Werror -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wimplicit-fallthrough -Wshadow -Wvla -Wformat=2 -Wno-format-nonliteral -Wshadow -Wasm-operand-widths -Wunused -I../tests/include/spe"
-
-    msg "build: TF-M config, gcc native build"
-    make clean
-    make lib CC="gcc" CFLAGS="-Os -std=c99 -Werror -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wshadow -Wvla -Wformat=2 -Wno-format-nonliteral -Wshadow -Wformat-signedness -Wlogical-op -I../tests/include/spe"
-}
-
-# Test that the given .o file builds with all (valid) combinations of the given options.
-#
-# Syntax: build_test_config_combos FILE VALIDATOR_FUNCTION OPT1 OPT2 ...
-#
-# The validator function is the name of a function to validate the combination of options.
-# It may be "" if all combinations are valid.
-# It receives a string containing a combination of options, as passed to the compiler,
-# e.g. "-DOPT1 -DOPT2 ...". It must return 0 iff the combination is valid, non-zero if invalid.
-build_test_config_combos () {
-    file=$1
-    shift
-    validate_options=$1
-    shift
-    options=("$@")
-
-    # clear all of the options so that they can be overridden on the clang commandline
-    for opt in "${options[@]}"; do
-        ./scripts/config.py unset ${opt}
-    done
-
-    # enter the directory containing the target file & strip the dir from the filename
-    cd $(dirname ${file})
-    file=$(basename ${file})
-
-    # The most common issue is unused variables/functions, so ensure -Wunused is set.
-    warning_flags="-Werror -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wimplicit-fallthrough -Wshadow -Wvla -Wformat=2 -Wno-format-nonliteral -Wshadow -Wasm-operand-widths -Wunused"
-
-    # Extract the command generated by the Makefile to build the target file.
-    # This ensures that we have any include paths, macro definitions, etc
-    # that may be applied by make.
-    # Add -fsyntax-only as we only want a syntax check and don't need to generate a file.
-    compile_cmd="clang \$(LOCAL_CFLAGS) ${warning_flags} -fsyntax-only -c"
-
-    makefile=$(TMPDIR=. mktemp)
-    deps=""
-
-    len=${#options[@]}
-    source_file=${file%.o}.c
-
-    targets=0
-    echo 'include Makefile' >${makefile}
-
-    for ((i = 0; i < $((2**${len})); i++)); do
-        # generate each of 2^n combinations of options
-        # each bit of $i is used to determine if options[i] will be set or not
-        target="t"
-        clang_args=""
-        for ((j = 0; j < ${len}; j++)); do
-            if (((i >> j) & 1)); then
-                opt=-D${options[$j]}
-                clang_args="${clang_args} ${opt}"
-                target="${target}${opt}"
-            fi
-        done
-
-        # if combination is not known to be invalid, add it to the makefile
-        if [[ -z $validate_options ]] || $validate_options "${clang_args}"; then
-            cmd="${compile_cmd} ${clang_args}"
-            echo "${target}: ${source_file}; $cmd ${source_file}" >> ${makefile}
-
-            deps="${deps} ${target}"
-            ((++targets))
-        fi
-    done
-
-    echo "build_test_config_combos: ${deps}" >> ${makefile}
-
-    # execute all of the commands via Make (probably in parallel)
-    make -s -f ${makefile} build_test_config_combos
-    echo "$targets targets checked"
-
-    # clean up the temporary makefile
-    rm ${makefile}
-}
-
-validate_aes_config_variations () {
-    if [[ "$1" == *"MBEDTLS_AES_USE_HARDWARE_ONLY"* ]]; then
-        if [[ "$1" == *"MBEDTLS_PADLOCK_C"* ]]; then
-            return 1
-        fi
-        if [[ !(("$HOSTTYPE" == "aarch64" && "$1" != *"MBEDTLS_AESCE_C"*) || \
-                ("$HOSTTYPE" == "x86_64"  && "$1" != *"MBEDTLS_AESNI_C"*)) ]]; then
-            return 1
-        fi
-    fi
-    return 0
-}
-
-component_build_aes_variations () {
-    # 18s - around 90ms per clang invocation on M1 Pro
-    #
-    # aes.o has many #if defined(...) guards that intersect in complex ways.
-    # Test that all the combinations build cleanly.
-
-    MBEDTLS_ROOT_DIR="$PWD"
-    msg "build: aes.o for all combinations of relevant config options"
-
-    build_test_config_combos library/aes.o validate_aes_config_variations \
-        "MBEDTLS_AES_SETKEY_ENC_ALT" "MBEDTLS_AES_DECRYPT_ALT" \
-        "MBEDTLS_AES_ROM_TABLES" "MBEDTLS_AES_ENCRYPT_ALT" "MBEDTLS_AES_SETKEY_DEC_ALT" \
-        "MBEDTLS_AES_FEWER_TABLES" "MBEDTLS_PADLOCK_C" "MBEDTLS_AES_USE_HARDWARE_ONLY" \
-        "MBEDTLS_AESNI_C" "MBEDTLS_AESCE_C" "MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH"
-
-    cd "$MBEDTLS_ROOT_DIR"
-    msg "build: aes.o for all combinations of relevant config options + BLOCK_CIPHER_NO_DECRYPT"
-
-    # MBEDTLS_BLOCK_CIPHER_NO_DECRYPT is incompatible with ECB in PSA, CBC/XTS/NIST_KW/DES,
-    # manually set or unset those configurations to check
-    # MBEDTLS_BLOCK_CIPHER_NO_DECRYPT with various combinations in aes.o.
-    scripts/config.py set MBEDTLS_BLOCK_CIPHER_NO_DECRYPT
-    scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
-    scripts/config.py unset MBEDTLS_CIPHER_MODE_XTS
-    scripts/config.py unset MBEDTLS_DES_C
-    scripts/config.py unset MBEDTLS_NIST_KW_C
-    build_test_config_combos library/aes.o validate_aes_config_variations \
-        "MBEDTLS_AES_SETKEY_ENC_ALT" "MBEDTLS_AES_DECRYPT_ALT" \
-        "MBEDTLS_AES_ROM_TABLES" "MBEDTLS_AES_ENCRYPT_ALT" "MBEDTLS_AES_SETKEY_DEC_ALT" \
-        "MBEDTLS_AES_FEWER_TABLES" "MBEDTLS_PADLOCK_C" "MBEDTLS_AES_USE_HARDWARE_ONLY" \
-        "MBEDTLS_AESNI_C" "MBEDTLS_AESCE_C" "MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH"
-}
-
-component_test_no_platform () {
-    # Full configuration build, without platform support, file IO and net sockets.
-    # This should catch missing mbedtls_printf definitions, and by disabling file
-    # IO, it should catch missing '#include <stdio.h>'
-    msg "build: full config except platform/fsio/net, make, gcc, C99" # ~ 30s
-    scripts/config.py full_no_platform
-    scripts/config.py unset MBEDTLS_PLATFORM_C
-    scripts/config.py unset MBEDTLS_NET_C
-    scripts/config.py unset MBEDTLS_FS_IO
-    scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
-    scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C
-    scripts/config.py unset MBEDTLS_PSA_ITS_FILE_C
-    scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED
-    # Note, _DEFAULT_SOURCE needs to be defined for platforms using glibc version >2.19,
-    # to re-enable platform integration features otherwise disabled in C99 builds
-    make CC=gcc CFLAGS='-Werror -Wall -Wextra -std=c99 -pedantic -Os -D_DEFAULT_SOURCE' lib programs
-    make CC=gcc CFLAGS='-Werror -Wall -Wextra -Os' test
-}
-
-component_build_no_std_function () {
-    # catch compile bugs in _uninit functions
-    msg "build: full config with NO_STD_FUNCTION, make, gcc" # ~ 30s
-    scripts/config.py full
-    scripts/config.py set MBEDTLS_PLATFORM_NO_STD_FUNCTIONS
-    scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED
-    scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT
-    CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Check .
-    make
-}
-
-component_build_no_ssl_srv () {
-    msg "build: full config except SSL server, make, gcc" # ~ 30s
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_SSL_SRV_C
-    make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1'
-}
-
-component_build_no_ssl_cli () {
-    msg "build: full config except SSL client, make, gcc" # ~ 30s
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_SSL_CLI_C
-    make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1'
-}
-
-component_build_no_sockets () {
-    # Note, C99 compliance can also be tested with the sockets support disabled,
-    # as that requires a POSIX platform (which isn't the same as C99).
-    msg "build: full config except net_sockets.c, make, gcc -std=c99 -pedantic" # ~ 30s
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_NET_C # getaddrinfo() undeclared, etc.
-    scripts/config.py set MBEDTLS_NO_PLATFORM_ENTROPY # uses syscall() on GNU/Linux
-    make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1 -std=c99 -pedantic' lib
-}
-
-component_test_memory_buffer_allocator_backtrace () {
-    msg "build: default config with memory buffer allocator and backtrace enabled"
-    scripts/config.py set MBEDTLS_MEMORY_BUFFER_ALLOC_C
-    scripts/config.py set MBEDTLS_PLATFORM_MEMORY
-    scripts/config.py set MBEDTLS_MEMORY_BACKTRACE
-    scripts/config.py set MBEDTLS_MEMORY_DEBUG
-    cmake -DCMAKE_BUILD_TYPE:String=Release .
-    make
-
-    msg "test: MBEDTLS_MEMORY_BUFFER_ALLOC_C and MBEDTLS_MEMORY_BACKTRACE"
-    make test
-}
-
-component_test_memory_buffer_allocator () {
-    msg "build: default config with memory buffer allocator"
-    scripts/config.py set MBEDTLS_MEMORY_BUFFER_ALLOC_C
-    scripts/config.py set MBEDTLS_PLATFORM_MEMORY
-    cmake -DCMAKE_BUILD_TYPE:String=Release .
-    make
-
-    msg "test: MBEDTLS_MEMORY_BUFFER_ALLOC_C"
-    make test
-
-    msg "test: ssl-opt.sh, MBEDTLS_MEMORY_BUFFER_ALLOC_C"
-    # MBEDTLS_MEMORY_BUFFER_ALLOC is slow. Skip tests that tend to time out.
-    tests/ssl-opt.sh -e '^DTLS proxy'
-}
-
-component_test_no_max_fragment_length () {
-    # Run max fragment length tests with MFL disabled
-    msg "build: default config except MFL extension (ASan build)" # ~ 30s
-    scripts/config.py unset MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
-    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: ssl-opt.sh, MFL-related tests"
-    tests/ssl-opt.sh -f "Max fragment length"
-}
-
-component_test_asan_remove_peer_certificate () {
-    msg "build: default config with MBEDTLS_SSL_KEEP_PEER_CERTIFICATE disabled (ASan build)"
-    scripts/config.py unset MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE"
-    make test
-
-    msg "test: ssl-opt.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE"
-    tests/ssl-opt.sh
-
-    msg "test: compat.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE"
-    tests/compat.sh
-
-    msg "test: context-info.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE"
-    tests/context-info.sh
-}
-
-component_test_no_max_fragment_length_small_ssl_out_content_len () {
-    msg "build: no MFL extension, small SSL_OUT_CONTENT_LEN (ASan build)"
-    scripts/config.py unset MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
-    scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 16384
-    scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 4096
-    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: MFL tests (disabled MFL extension case) & large packet tests"
-    tests/ssl-opt.sh -f "Max fragment length\|Large buffer"
-
-    msg "test: context-info.sh (disabled MFL extension case)"
-    tests/context-info.sh
-}
-
-component_test_variable_ssl_in_out_buffer_len () {
-    msg "build: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled (ASan build)"
-    scripts/config.py set MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
-    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled"
-    make test
-
-    msg "test: ssl-opt.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled"
-    tests/ssl-opt.sh
-
-    msg "test: compat.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled"
-    tests/compat.sh
-}
-
-component_test_dtls_cid_legacy () {
-    msg "build: MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy) enabled (ASan build)"
-    scripts/config.py set MBEDTLS_SSL_DTLS_CONNECTION_ID_COMPAT 1
-
-    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy)"
-    make test
-
-    msg "test: ssl-opt.sh, MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy) enabled"
-    tests/ssl-opt.sh
-
-    msg "test: compat.sh, MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy) enabled"
-    tests/compat.sh
-}
-
-component_test_ssl_alloc_buffer_and_mfl () {
-    msg "build: default config with memory buffer allocator and MFL extension"
-    scripts/config.py set MBEDTLS_MEMORY_BUFFER_ALLOC_C
-    scripts/config.py set MBEDTLS_PLATFORM_MEMORY
-    scripts/config.py set MBEDTLS_MEMORY_DEBUG
-    scripts/config.py set MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
-    scripts/config.py set MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
-    cmake -DCMAKE_BUILD_TYPE:String=Release .
-    make
-
-    msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH, MBEDTLS_MEMORY_BUFFER_ALLOC_C, MBEDTLS_MEMORY_DEBUG and MBEDTLS_SSL_MAX_FRAGMENT_LENGTH"
-    make test
-
-    msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH, MBEDTLS_MEMORY_BUFFER_ALLOC_C, MBEDTLS_MEMORY_DEBUG and MBEDTLS_SSL_MAX_FRAGMENT_LENGTH"
-    tests/ssl-opt.sh -f "Handshake memory usage"
-}
-
-component_test_when_no_ciphersuites_have_mac () {
-    msg "build: when no ciphersuites have MAC"
-    scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
-    scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
-    scripts/config.py unset MBEDTLS_CMAC_C
-    make
-
-    msg "test: !MBEDTLS_SSL_SOME_SUITES_USE_MAC"
-    make test
-
-    msg "test ssl-opt.sh: !MBEDTLS_SSL_SOME_SUITES_USE_MAC"
-    tests/ssl-opt.sh -f 'Default\|EtM' -e 'without EtM'
-}
-
-component_test_no_date_time () {
-    msg "build: default config without MBEDTLS_HAVE_TIME_DATE"
-    scripts/config.py unset MBEDTLS_HAVE_TIME_DATE
-    cmake -D CMAKE_BUILD_TYPE:String=Check .
-    make
-
-    msg "test: !MBEDTLS_HAVE_TIME_DATE - main suites"
-    make test
-}
-
-component_test_platform_calloc_macro () {
-    msg "build: MBEDTLS_PLATFORM_{CALLOC/FREE}_MACRO enabled (ASan build)"
-    scripts/config.py set MBEDTLS_PLATFORM_MEMORY
-    scripts/config.py set MBEDTLS_PLATFORM_CALLOC_MACRO calloc
-    scripts/config.py set MBEDTLS_PLATFORM_FREE_MACRO   free
-    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: MBEDTLS_PLATFORM_{CALLOC/FREE}_MACRO enabled (ASan build)"
-    make test
-}
-
-component_test_malloc_0_null () {
-    msg "build: malloc(0) returns NULL (ASan+UBSan build)"
-    scripts/config.py full
-    make CC=$ASAN_CC CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"$PWD/tests/configs/user-config-malloc-0-null.h\"' $ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
-
-    msg "test: malloc(0) returns NULL (ASan+UBSan build)"
-    make test
-
-    msg "selftest: malloc(0) returns NULL (ASan+UBSan build)"
-    # Just the calloc selftest. "make test" ran the others as part of the
-    # test suites.
-    programs/test/selftest calloc
-
-    msg "test ssl-opt.sh: malloc(0) returns NULL (ASan+UBSan build)"
-    # Run a subset of the tests. The choice is a balance between coverage
-    # and time (including time indirectly wasted due to flaky tests).
-    # The current choice is to skip tests whose description includes
-    # "proxy", which is an approximation of skipping tests that use the
-    # UDP proxy, which tend to be slower and flakier.
-    tests/ssl-opt.sh -e 'proxy'
-}
-
-support_test_aesni () {
-    # Check that gcc targets x86_64 (we can build AESNI), and check for
-    # AESNI support on the host (we can run AESNI).
-    #
-    # The name of this function is possibly slightly misleading, but needs to align
-    # with the name of the corresponding test, component_test_aesni.
-    #
-    # In principle 32-bit x86 can support AESNI, but our implementation does not
-    # support 32-bit x86, so we check for x86-64.
-    # We can only grep /proc/cpuinfo on Linux, so this also checks for Linux
-    (gcc -v 2>&1 | grep Target | grep -q x86_64) &&
-        [[ "$HOSTTYPE" == "x86_64" && "$OSTYPE" == "linux-gnu" ]] &&
-        (lscpu | grep -qw aes)
-}
-
-component_test_aesni () { # ~ 60s
-    # This tests the two AESNI implementations (intrinsics and assembly), and also the plain C
-    # fallback. It also tests the logic that is used to select which implementation(s) to build.
-    #
-    # This test does not require the host to have support for AESNI (if it doesn't, the run-time
-    # AESNI detection will fallback to the plain C implementation, so the tests will instead
-    # exercise the plain C impl).
-
-    msg "build: default config with different AES implementations"
-    scripts/config.py set MBEDTLS_AESNI_C
-    scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
-    scripts/config.py set MBEDTLS_HAVE_ASM
-
-    # test the intrinsics implementation
-    msg "AES tests, test intrinsics"
-    make clean
-    make CC=gcc CFLAGS='-Werror -Wall -Wextra -mpclmul -msse2 -maes'
-    # check that we built intrinsics - this should be used by default when supported by the compiler
-    ./programs/test/selftest aes | grep "AESNI code" | grep -q "intrinsics"
-
-    # test the asm implementation
-    msg "AES tests, test assembly"
-    make clean
-    make CC=gcc CFLAGS='-Werror -Wall -Wextra -mno-pclmul -mno-sse2 -mno-aes'
-    # check that we built assembly - this should be built if the compiler does not support intrinsics
-    ./programs/test/selftest aes | grep "AESNI code" | grep -q "assembly"
-
-    # test the plain C implementation
-    scripts/config.py unset MBEDTLS_AESNI_C
-    scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
-    msg "AES tests, plain C"
-    make clean
-    make CC=gcc CFLAGS='-O2 -Werror'
-    # check that there is no AESNI code present
-    ./programs/test/selftest aes | not grep -q "AESNI code"
-    not grep -q "AES note: using AESNI" ./programs/test/selftest
-    grep -q "AES note: built-in implementation." ./programs/test/selftest
-
-    # test the intrinsics implementation
-    scripts/config.py set MBEDTLS_AESNI_C
-    scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY
-    msg "AES tests, test AESNI only"
-    make clean
-    make CC=gcc CFLAGS='-Werror -Wall -Wextra -mpclmul -msse2 -maes'
-    ./programs/test/selftest aes | grep -q "AES note: using AESNI"
-    ./programs/test/selftest aes | not grep -q "AES note: built-in implementation."
-    grep -q "AES note: using AESNI" ./programs/test/selftest
-    not grep -q "AES note: built-in implementation." ./programs/test/selftest
-}
-
-component_test_sha3_variations () {
-    msg "sha3 loop unroll variations"
-
-    # define minimal config sufficient to test SHA3
-    cat > include/mbedtls/mbedtls_config.h << END
-        #define MBEDTLS_SELF_TEST
-        #define MBEDTLS_SHA3_C
-END
-
-    msg "all loops unrolled"
-    make clean
-    make -C tests test_suite_shax CFLAGS="-DMBEDTLS_SHA3_THETA_UNROLL=1 -DMBEDTLS_SHA3_PI_UNROLL=1 -DMBEDTLS_SHA3_CHI_UNROLL=1 -DMBEDTLS_SHA3_RHO_UNROLL=1"
-    ./tests/test_suite_shax
-
-    msg "all loops rolled up"
-    make clean
-    make -C tests test_suite_shax CFLAGS="-DMBEDTLS_SHA3_THETA_UNROLL=0 -DMBEDTLS_SHA3_PI_UNROLL=0 -DMBEDTLS_SHA3_CHI_UNROLL=0 -DMBEDTLS_SHA3_RHO_UNROLL=0"
-    ./tests/test_suite_shax
-}
-
-support_test_aesni_m32 () {
-    support_test_m32_no_asm && (lscpu | grep -qw aes)
-}
-
-component_test_aesni_m32 () { # ~ 60s
-    # This tests are duplicated from component_test_aesni for i386 target
-    #
-    # AESNI intrinsic code supports i386 and assembly code does not support it.
-
-    msg "build: default config with different AES implementations"
-    scripts/config.py set MBEDTLS_AESNI_C
-    scripts/config.py set MBEDTLS_PADLOCK_C
-    scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
-    scripts/config.py set MBEDTLS_HAVE_ASM
-
-    # test the intrinsics implementation with gcc
-    msg "AES tests, test intrinsics (gcc)"
-    make clean
-    make CC=gcc CFLAGS='-m32 -Werror -Wall -Wextra' LDFLAGS='-m32'
-    # check that we built intrinsics - this should be used by default when supported by the compiler
-    ./programs/test/selftest aes | grep "AESNI code" | grep -q "intrinsics"
-    grep -q "AES note: using AESNI" ./programs/test/selftest
-    grep -q "AES note: built-in implementation." ./programs/test/selftest
-    grep -q "AES note: using VIA Padlock" ./programs/test/selftest
-    grep -q mbedtls_aesni_has_support ./programs/test/selftest
-
-    scripts/config.py set MBEDTLS_AESNI_C
-    scripts/config.py unset MBEDTLS_PADLOCK_C
-    scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY
-    msg "AES tests, test AESNI only"
-    make clean
-    make CC=gcc CFLAGS='-m32 -Werror -Wall -Wextra -mpclmul -msse2 -maes' LDFLAGS='-m32'
-    ./programs/test/selftest aes | grep -q "AES note: using AESNI"
-    ./programs/test/selftest aes | not grep -q "AES note: built-in implementation."
-    grep -q "AES note: using AESNI" ./programs/test/selftest
-    not grep -q "AES note: built-in implementation." ./programs/test/selftest
-    not grep -q "AES note: using VIA Padlock" ./programs/test/selftest
-    not grep -q mbedtls_aesni_has_support ./programs/test/selftest
-}
-
-support_test_aesni_m32_clang () {
-    # clang >= 4 is required to build with target attributes
-    support_test_aesni_m32 && [[ $(clang_version) -ge 4 ]]
-}
-
-component_test_aesni_m32_clang () {
-
-    scripts/config.py set MBEDTLS_AESNI_C
-    scripts/config.py set MBEDTLS_PADLOCK_C
-    scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
-    scripts/config.py set MBEDTLS_HAVE_ASM
-
-    # test the intrinsics implementation with clang
-    msg "AES tests, test intrinsics (clang)"
-    make clean
-    make CC=clang CFLAGS='-m32 -Werror -Wall -Wextra' LDFLAGS='-m32'
-    # check that we built intrinsics - this should be used by default when supported by the compiler
-    ./programs/test/selftest aes | grep "AESNI code" | grep -q "intrinsics"
-    grep -q "AES note: using AESNI" ./programs/test/selftest
-    grep -q "AES note: built-in implementation." ./programs/test/selftest
-    grep -q "AES note: using VIA Padlock" ./programs/test/selftest
-    grep -q mbedtls_aesni_has_support ./programs/test/selftest
-}
-
-# For timebeing, no aarch64 gcc available in CI and no arm64 CI node.
-component_build_aes_aesce_armcc () {
-    msg "Build: AESCE test on arm64 platform without plain C."
-    scripts/config.py baremetal
-
-    # armc[56] don't support SHA-512 intrinsics
-    scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT
-
-    # Stop armclang warning about feature detection for A64_CRYPTO.
-    # With this enabled, the library does build correctly under armclang,
-    # but in baremetal builds (as tested here), feature detection is
-    # unavailable, and the user is notified via a #warning. So enabling
-    # this feature would prevent us from building with -Werror on
-    # armclang. Tracked in #7198.
-    scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
-    scripts/config.py set MBEDTLS_HAVE_ASM
-
-    msg "AESCE, build with default configuration."
-    scripts/config.py set MBEDTLS_AESCE_C
-    scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
-    armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto"
-
-    msg "AESCE, build AESCE only"
-    scripts/config.py set MBEDTLS_AESCE_C
-    scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY
-    armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto"
-}
-
-support_build_aes_armce () {
-    # clang >= 11 is required to build with AES extensions
-    [[ $(clang_version) -ge 11 ]]
-}
-
-component_build_aes_armce () {
-    # Test variations of AES with Armv8 crypto extensions
-    scripts/config.py set MBEDTLS_AESCE_C
-    scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY
-
-    msg "MBEDTLS_AES_USE_HARDWARE_ONLY, clang, aarch64"
-    make -B library/aesce.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a+crypto"
-
-    msg "MBEDTLS_AES_USE_HARDWARE_ONLY, clang, arm"
-    make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm"
-
-    msg "MBEDTLS_AES_USE_HARDWARE_ONLY, clang, thumb"
-    make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb"
-
-    scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
-
-    msg "no MBEDTLS_AES_USE_HARDWARE_ONLY, clang, aarch64"
-    make -B library/aesce.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a+crypto"
-
-    msg "no MBEDTLS_AES_USE_HARDWARE_ONLY, clang, arm"
-    make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm"
-
-    msg "no MBEDTLS_AES_USE_HARDWARE_ONLY, clang, thumb"
-    make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb"
-
-    # test for presence of AES instructions
-    scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY
-    msg "clang, test A32 crypto instructions built"
-    make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -S"
-    grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.o
-    msg "clang, test T32 crypto instructions built"
-    make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb -S"
-    grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.o
-    msg "clang, test aarch64 crypto instructions built"
-    make -B library/aesce.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a -S"
-    grep -E 'aes[a-z]+\s*[qv]' library/aesce.o
-
-    # test for absence of AES instructions
-    scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
-    scripts/config.py unset MBEDTLS_AESCE_C
-    msg "clang, test A32 crypto instructions not built"
-    make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -S"
-    not grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.o
-    msg "clang, test T32 crypto instructions not built"
-    make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb -S"
-    not grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.o
-    msg "clang, test aarch64 crypto instructions not built"
-    make -B library/aesce.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a -S"
-    not grep -E 'aes[a-z]+\s*[qv]' library/aesce.o
-}
-
-support_build_sha_armce () {
-    # clang >= 4 is required to build with SHA extensions
-    [[ $(clang_version) -ge 4 ]]
-}
-
-component_build_sha_armce () {
-    scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
-
-
-    # Test variations of SHA256 Armv8 crypto extensions
-    scripts/config.py set MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY
-        msg "MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY clang, aarch64"
-        make -B library/sha256.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a"
-        msg "MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY clang, arm"
-        make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm"
-    scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY
-
-
-    # test the deprecated form of the config option
-    scripts/config.py set MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY
-        msg "MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY clang, thumb"
-        make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb"
-    scripts/config.py unset MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY
-
-    scripts/config.py set MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
-        msg "MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT clang, aarch64"
-        make -B library/sha256.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a"
-    scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
-
-
-    # test the deprecated form of the config option
-    scripts/config.py set MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT
-        msg "MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT clang, arm"
-        make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -std=c99"
-        msg "MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT clang, thumb"
-        make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb"
-    scripts/config.py unset MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT
-
-
-    # examine the disassembly for presence of SHA instructions
-    for opt in MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT; do
-        scripts/config.py set ${opt}
-            msg "${opt} clang, test A32 crypto instructions built"
-            make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -S"
-            grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.o
-
-            msg "${opt} clang, test T32 crypto instructions built"
-            make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb -S"
-            grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.o
-
-            msg "${opt} clang, test aarch64 crypto instructions built"
-            make -B library/sha256.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a -S"
-            grep -E 'sha256[a-z0-9]+\s+[qv]' library/sha256.o
-        scripts/config.py unset ${opt}
-    done
-
-
-    # examine the disassembly for absence of SHA instructions
-    msg "clang, test A32 crypto instructions not built"
-    make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -S"
-    not grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.o
-
-    msg "clang, test T32 crypto instructions not built"
-    make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb -S"
-    not grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.o
-
-    msg "clang, test aarch64 crypto instructions not built"
-    make -B library/sha256.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a -S"
-    not grep -E 'sha256[a-z0-9]+\s+[qv]' library/sha256.o
-}
-
-# For timebeing, no VIA Padlock platform available.
-component_build_aes_via_padlock () {
-
-    msg "AES:VIA PadLock, build with default configuration."
-    scripts/config.py unset MBEDTLS_AESNI_C
-    scripts/config.py set MBEDTLS_PADLOCK_C
-    scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
-    make CC=gcc CFLAGS="$ASAN_CFLAGS -m32" LDFLAGS="-m32 $ASAN_CFLAGS"
-    grep -q mbedtls_padlock_has_support ./programs/test/selftest
-
-}
-
-support_build_aes_via_padlock_only () {
-    ( [ "$MBEDTLS_TEST_PLATFORM" == "Linux-x86_64" ] || \
-        [ "$MBEDTLS_TEST_PLATFORM" == "Linux-amd64" ] ) && \
-    [ "`dpkg --print-foreign-architectures`" == "i386" ]
-}
-
-support_build_aes_aesce_armcc () {
-    support_build_armcc
-}
-
-component_test_aes_only_128_bit_keys () {
-    msg "build: default config + AES_ONLY_128_BIT_KEY_LENGTH"
-    scripts/config.py set MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH
-    scripts/config.py unset MBEDTLS_PADLOCK_C
-
-    make CFLAGS='-O2 -Werror -Wall -Wextra'
-
-    msg "test: default config + AES_ONLY_128_BIT_KEY_LENGTH"
-    make test
-}
-
-component_test_no_ctr_drbg_aes_only_128_bit_keys () {
-    msg "build: default config + AES_ONLY_128_BIT_KEY_LENGTH - CTR_DRBG_C"
-    scripts/config.py set MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH
-    scripts/config.py unset MBEDTLS_CTR_DRBG_C
-    scripts/config.py unset MBEDTLS_PADLOCK_C
-
-    make CC=clang CFLAGS='-Werror -Wall -Wextra'
-
-    msg "test: default config + AES_ONLY_128_BIT_KEY_LENGTH - CTR_DRBG_C"
-    make test
-}
-
-component_test_aes_only_128_bit_keys_have_builtins () {
-    msg "build: default config + AES_ONLY_128_BIT_KEY_LENGTH - AESNI_C - AESCE_C"
-    scripts/config.py set MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH
-    scripts/config.py unset MBEDTLS_PADLOCK_C
-    scripts/config.py unset MBEDTLS_AESNI_C
-    scripts/config.py unset MBEDTLS_AESCE_C
-
-    make CFLAGS='-O2 -Werror -Wall -Wextra'
-
-    msg "test: default config + AES_ONLY_128_BIT_KEY_LENGTH - AESNI_C - AESCE_C"
-    make test
-
-    msg "selftest: default config + AES_ONLY_128_BIT_KEY_LENGTH - AESNI_C - AESCE_C"
-    programs/test/selftest
-}
-
-component_test_gcm_largetable () {
-    msg "build: default config + GCM_LARGE_TABLE - AESNI_C - AESCE_C"
-    scripts/config.py set MBEDTLS_GCM_LARGE_TABLE
-    scripts/config.py unset MBEDTLS_PADLOCK_C
-    scripts/config.py unset MBEDTLS_AESNI_C
-    scripts/config.py unset MBEDTLS_AESCE_C
-
-    make CFLAGS='-O2 -Werror -Wall -Wextra'
-
-    msg "test: default config - GCM_LARGE_TABLE - AESNI_C - AESCE_C"
-    make test
-}
-
-component_test_aes_fewer_tables () {
-    msg "build: default config with AES_FEWER_TABLES enabled"
-    scripts/config.py set MBEDTLS_AES_FEWER_TABLES
-    make CFLAGS='-O2 -Werror -Wall -Wextra'
-
-    msg "test: AES_FEWER_TABLES"
-    make test
-}
-
-component_test_aes_rom_tables () {
-    msg "build: default config with AES_ROM_TABLES enabled"
-    scripts/config.py set MBEDTLS_AES_ROM_TABLES
-    make CFLAGS='-O2 -Werror -Wall -Wextra'
-
-    msg "test: AES_ROM_TABLES"
-    make test
-}
-
-component_test_aes_fewer_tables_and_rom_tables () {
-    msg "build: default config with AES_ROM_TABLES and AES_FEWER_TABLES enabled"
-    scripts/config.py set MBEDTLS_AES_FEWER_TABLES
-    scripts/config.py set MBEDTLS_AES_ROM_TABLES
-    make CFLAGS='-O2 -Werror -Wall -Wextra'
-
-    msg "test: AES_FEWER_TABLES + AES_ROM_TABLES"
-    make test
-}
-
-# helper for common_block_cipher_no_decrypt() which:
-# - enable/disable the list of config options passed from -s/-u respectively.
-# - build
-# - test for tests_suite_xxx
-# - selftest
-#
-# Usage: helper_block_cipher_no_decrypt_build_test
-#        [-s set_opts] [-u unset_opts] [-c cflags] [-l ldflags] [option [...]]
-# Options:  -s set_opts     the list of config options to enable
-#           -u unset_opts   the list of config options to disable
-#           -c cflags       the list of options passed to CFLAGS
-#           -l ldflags      the list of options passed to LDFLAGS
-helper_block_cipher_no_decrypt_build_test () {
-    while [ $# -gt 0 ]; do
-        case "$1" in
-            -s)
-                shift; local set_opts="$1";;
-            -u)
-                shift; local unset_opts="$1";;
-            -c)
-                shift; local cflags="-Werror -Wall -Wextra $1";;
-            -l)
-                shift; local ldflags="$1";;
-        esac
-        shift
-    done
-    set_opts="${set_opts:-}"
-    unset_opts="${unset_opts:-}"
-    cflags="${cflags:-}"
-    ldflags="${ldflags:-}"
-
-    [ -n "$set_opts" ] && echo "Enabling: $set_opts" && scripts/config.py set-all $set_opts
-    [ -n "$unset_opts" ] && echo "Disabling: $unset_opts" && scripts/config.py unset-all $unset_opts
-
-    msg "build: default config + BLOCK_CIPHER_NO_DECRYPT${set_opts:+ + $set_opts}${unset_opts:+ - $unset_opts} with $cflags${ldflags:+, $ldflags}"
-    make clean
-    make CFLAGS="-O2 $cflags" LDFLAGS="$ldflags"
-
-    # Make sure we don't have mbedtls_xxx_setkey_dec in AES/ARIA/CAMELLIA
-    not grep mbedtls_aes_setkey_dec library/aes.o
-    not grep mbedtls_aria_setkey_dec library/aria.o
-    not grep mbedtls_camellia_setkey_dec library/camellia.o
-    # Make sure we don't have mbedtls_internal_aes_decrypt in AES
-    not grep mbedtls_internal_aes_decrypt library/aes.o
-    # Make sure we don't have mbedtls_aesni_inverse_key in AESNI
-    not grep mbedtls_aesni_inverse_key library/aesni.o
-
-    msg "test: default config + BLOCK_CIPHER_NO_DECRYPT${set_opts:+ + $set_opts}${unset_opts:+ - $unset_opts} with $cflags${ldflags:+, $ldflags}"
-    make test
-
-    msg "selftest: default config + BLOCK_CIPHER_NO_DECRYPT${set_opts:+ + $set_opts}${unset_opts:+ - $unset_opts} with $cflags${ldflags:+, $ldflags}"
-    programs/test/selftest
-}
-
-# This is a common configuration function used in:
-# - component_test_block_cipher_no_decrypt_aesni_legacy()
-# - component_test_block_cipher_no_decrypt_aesni_use_psa()
-# in order to test BLOCK_CIPHER_NO_DECRYPT with AESNI intrinsics,
-# AESNI assembly and AES C implementation on x86_64 and with AESNI intrinsics
-# on x86.
-common_block_cipher_no_decrypt () {
-    # test AESNI intrinsics
-    helper_block_cipher_no_decrypt_build_test \
-        -s "MBEDTLS_AESNI_C" \
-        -c "-mpclmul -msse2 -maes"
-
-    # test AESNI assembly
-    helper_block_cipher_no_decrypt_build_test \
-        -s "MBEDTLS_AESNI_C" \
-        -c "-mno-pclmul -mno-sse2 -mno-aes"
-
-    # test AES C implementation
-    helper_block_cipher_no_decrypt_build_test \
-        -u "MBEDTLS_AESNI_C"
-
-    # test AESNI intrinsics for i386 target
-    helper_block_cipher_no_decrypt_build_test \
-        -s "MBEDTLS_AESNI_C" \
-        -c "-m32 -mpclmul -msse2 -maes" \
-        -l "-m32"
-}
-
-# This is a configuration function used in component_test_block_cipher_no_decrypt_xxx:
-# usage: 0: no PSA crypto configuration
-#        1: use PSA crypto configuration
-config_block_cipher_no_decrypt () {
-    use_psa=$1
-
-    scripts/config.py set MBEDTLS_BLOCK_CIPHER_NO_DECRYPT
-    scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
-    scripts/config.py unset MBEDTLS_CIPHER_MODE_XTS
-    scripts/config.py unset MBEDTLS_DES_C
-    scripts/config.py unset MBEDTLS_NIST_KW_C
-
-    if [ "$use_psa" -eq 1 ]; then
-        # Enable support for cryptographic mechanisms through the PSA API.
-        # Note: XTS, KW are not yet supported via the PSA API in Mbed TLS.
-        scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
-        scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_NO_PADDING
-        scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_PKCS7
-        scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_ECB_NO_PADDING
-        scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_DES
-    fi
-}
-
-component_test_block_cipher_no_decrypt_aesni () {
-    # This consistently causes an llvm crash on clang 3.8, so use gcc
-    export CC=gcc
-    config_block_cipher_no_decrypt 0
-    common_block_cipher_no_decrypt
-}
-
-component_test_block_cipher_no_decrypt_aesni_use_psa () {
-    # This consistently causes an llvm crash on clang 3.8, so use gcc
-    export CC=gcc
-    config_block_cipher_no_decrypt 1
-    common_block_cipher_no_decrypt
-}
-
-support_test_block_cipher_no_decrypt_aesce_armcc () {
-    support_build_armcc
-}
-
-component_test_block_cipher_no_decrypt_aesce_armcc () {
-    scripts/config.py baremetal
-
-    # armc[56] don't support SHA-512 intrinsics
-    scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT
-
-    # Stop armclang warning about feature detection for A64_CRYPTO.
-    # With this enabled, the library does build correctly under armclang,
-    # but in baremetal builds (as tested here), feature detection is
-    # unavailable, and the user is notified via a #warning. So enabling
-    # this feature would prevent us from building with -Werror on
-    # armclang. Tracked in #7198.
-    scripts/config.py unset MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT
-    scripts/config.py set MBEDTLS_HAVE_ASM
-
-    config_block_cipher_no_decrypt 1
-
-    # test AESCE baremetal build
-    scripts/config.py set MBEDTLS_AESCE_C
-    msg "build: default config + BLOCK_CIPHER_NO_DECRYPT with AESCE"
-    armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto -Werror -Wall -Wextra"
-
-    # Make sure we don't have mbedtls_xxx_setkey_dec in AES/ARIA/CAMELLIA
-    not grep mbedtls_aes_setkey_dec library/aes.o
-    not grep mbedtls_aria_setkey_dec library/aria.o
-    not grep mbedtls_camellia_setkey_dec library/camellia.o
-    # Make sure we don't have mbedtls_internal_aes_decrypt in AES
-    not grep mbedtls_internal_aes_decrypt library/aes.o
-    # Make sure we don't have mbedtls_aesce_inverse_key and aesce_decrypt_block in AESCE
-    not grep mbedtls_aesce_inverse_key library/aesce.o
-    not grep aesce_decrypt_block library/aesce.o
-}
-
-component_test_ctr_drbg_aes_256_sha_256 () {
-    msg "build: full + MBEDTLS_ENTROPY_FORCE_SHA256 (ASan build)"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_MEMORY_BUFFER_ALLOC_C
-    scripts/config.py set MBEDTLS_ENTROPY_FORCE_SHA256
-    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: full + MBEDTLS_ENTROPY_FORCE_SHA256 (ASan build)"
-    make test
-}
-
-component_test_ctr_drbg_aes_128_sha_512 () {
-    msg "build: full + MBEDTLS_CTR_DRBG_USE_128_BIT_KEY (ASan build)"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_MEMORY_BUFFER_ALLOC_C
-    scripts/config.py set MBEDTLS_CTR_DRBG_USE_128_BIT_KEY
-    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: full + MBEDTLS_CTR_DRBG_USE_128_BIT_KEY (ASan build)"
-    make test
-}
-
-component_test_ctr_drbg_aes_128_sha_256 () {
-    msg "build: full + MBEDTLS_CTR_DRBG_USE_128_BIT_KEY + MBEDTLS_ENTROPY_FORCE_SHA256 (ASan build)"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_MEMORY_BUFFER_ALLOC_C
-    scripts/config.py set MBEDTLS_CTR_DRBG_USE_128_BIT_KEY
-    scripts/config.py set MBEDTLS_ENTROPY_FORCE_SHA256
-    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: full + MBEDTLS_CTR_DRBG_USE_128_BIT_KEY + MBEDTLS_ENTROPY_FORCE_SHA256 (ASan build)"
-    make test
-}
-
-component_test_se_default () {
-    msg "build: default config + MBEDTLS_PSA_CRYPTO_SE_C"
-    scripts/config.py set MBEDTLS_PSA_CRYPTO_SE_C
-    make CC=clang CFLAGS="$ASAN_CFLAGS -Os" LDFLAGS="$ASAN_CFLAGS"
-
-    msg "test: default config + MBEDTLS_PSA_CRYPTO_SE_C"
-    make test
-}
-
-component_test_psa_crypto_drivers () {
-    msg "build: full + test drivers dispatching to builtins"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_PSA_CRYPTO_CONFIG
-    loc_cflags="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST_ALL"
-    loc_cflags="${loc_cflags} '-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/user-config-for-test.h\"'"
-    loc_cflags="${loc_cflags} -I../tests/include -O2"
-
-    make CC=$ASAN_CC CFLAGS="${loc_cflags}" LDFLAGS="$ASAN_CFLAGS"
-
-    msg "test: full + test drivers dispatching to builtins"
-    make test
-}
-
-component_test_make_shared () {
-    msg "build/test: make shared" # ~ 40s
-    make SHARED=1 all check
-    ldd programs/util/strerror | grep libmbedcrypto
-    programs/test/dlopen_demo.sh
-}
-
-component_test_cmake_shared () {
-    msg "build/test: cmake shared" # ~ 2min
-    cmake -DUSE_SHARED_MBEDTLS_LIBRARY=On .
-    make
-    ldd programs/util/strerror | grep libmbedcrypto
-    make test
-    programs/test/dlopen_demo.sh
-}
-
-test_build_opt () {
-    info=$1 cc=$2; shift 2
-    $cc --version
-    for opt in "$@"; do
-          msg "build/test: $cc $opt, $info" # ~ 30s
-          make CC="$cc" CFLAGS="$opt -std=c99 -pedantic -Wall -Wextra -Werror"
-          # We're confident enough in compilers to not run _all_ the tests,
-          # but at least run the unit tests. In particular, runs with
-          # optimizations use inline assembly whereas runs with -O0
-          # skip inline assembly.
-          make test # ~30s
-          make clean
-    done
-}
-
-# For FreeBSD we invoke the function by name so this condition is added
-# to disable the existing test_clang_opt function for linux.
-if [[ $(uname) != "Linux" ]]; then
-    component_test_clang_opt () {
-        scripts/config.py full
-        test_build_opt 'full config' clang -O0 -Os -O2
-    }
-fi
-
-component_test_clang_latest_opt () {
-    scripts/config.py full
-    test_build_opt 'full config' "$CLANG_LATEST" -O0 -Os -O2
-}
-support_test_clang_latest_opt () {
-    type "$CLANG_LATEST" >/dev/null 2>/dev/null
-}
-
-component_test_clang_earliest_opt () {
-    scripts/config.py full
-    test_build_opt 'full config' "$CLANG_EARLIEST" -O0
-}
-support_test_clang_earliest_opt () {
-    type "$CLANG_EARLIEST" >/dev/null 2>/dev/null
-}
-
-component_test_gcc_latest_opt () {
-    scripts/config.py full
-    test_build_opt 'full config' "$GCC_LATEST" -O0 -Os -O2
-}
-support_test_gcc_latest_opt () {
-    type "$GCC_LATEST" >/dev/null 2>/dev/null
-}
-
-component_test_gcc_earliest_opt () {
-    scripts/config.py full
-    test_build_opt 'full config' "$GCC_EARLIEST" -O0
-}
-support_test_gcc_earliest_opt () {
-    type "$GCC_EARLIEST" >/dev/null 2>/dev/null
-}
-
-component_build_mbedtls_config_file () {
-    msg "build: make with MBEDTLS_CONFIG_FILE" # ~40s
-    scripts/config.py -w full_config.h full
-    echo '#error "MBEDTLS_CONFIG_FILE is not working"' >"$CONFIG_H"
-    make CFLAGS="-I '$PWD' -DMBEDTLS_CONFIG_FILE='\"full_config.h\"'"
-    # Make sure this feature is enabled. We'll disable it in the next phase.
-    programs/test/query_compile_time_config MBEDTLS_NIST_KW_C
-    make clean
-
-    msg "build: make with MBEDTLS_CONFIG_FILE + MBEDTLS_USER_CONFIG_FILE"
-    # In the user config, disable one feature (for simplicity, pick a feature
-    # that nothing else depends on).
-    echo '#undef MBEDTLS_NIST_KW_C' >user_config.h
-    make CFLAGS="-I '$PWD' -DMBEDTLS_CONFIG_FILE='\"full_config.h\"' -DMBEDTLS_USER_CONFIG_FILE='\"user_config.h\"'"
-    not programs/test/query_compile_time_config MBEDTLS_NIST_KW_C
-
-    rm -f user_config.h full_config.h
-}
-
-component_build_psa_config_file () {
-    msg "build: make with MBEDTLS_PSA_CRYPTO_CONFIG_FILE" # ~40s
-    scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
-    cp "$CRYPTO_CONFIG_H" psa_test_config.h
-    echo '#error "MBEDTLS_PSA_CRYPTO_CONFIG_FILE is not working"' >"$CRYPTO_CONFIG_H"
-    make CFLAGS="-I '$PWD' -DMBEDTLS_PSA_CRYPTO_CONFIG_FILE='\"psa_test_config.h\"'"
-    # Make sure this feature is enabled. We'll disable it in the next phase.
-    programs/test/query_compile_time_config MBEDTLS_CMAC_C
-    make clean
-
-    msg "build: make with MBEDTLS_PSA_CRYPTO_CONFIG_FILE + MBEDTLS_PSA_CRYPTO_USER_CONFIG_FILE" # ~40s
-    # In the user config, disable one feature and its dependencies, which will
-    # reflect on the mbedtls configuration so we can query it with
-    # query_compile_time_config.
-    echo '#undef PSA_WANT_ALG_CMAC' >psa_user_config.h
-    echo '#undef PSA_WANT_ALG_PBKDF2_AES_CMAC_PRF_128' >> psa_user_config.h
-    scripts/config.py unset MBEDTLS_CMAC_C
-    make CFLAGS="-I '$PWD' -DMBEDTLS_PSA_CRYPTO_CONFIG_FILE='\"psa_test_config.h\"' -DMBEDTLS_PSA_CRYPTO_USER_CONFIG_FILE='\"psa_user_config.h\"'"
-    not programs/test/query_compile_time_config MBEDTLS_CMAC_C
-
-    rm -f psa_test_config.h psa_user_config.h
-}
-
-component_build_psa_alt_headers () {
-    msg "build: make with PSA alt headers" # ~20s
-
-    # Generate alternative versions of the substitutable headers with the
-    # same content except different include guards.
-    make -C tests include/alt-extra/psa/crypto_platform_alt.h include/alt-extra/psa/crypto_struct_alt.h
-
-    # Build the library and some programs.
-    # Don't build the fuzzers to avoid having to go through hoops to set
-    # a correct include path for programs/fuzz/Makefile.
-    make CFLAGS="-I ../tests/include/alt-extra -DMBEDTLS_PSA_CRYPTO_PLATFORM_FILE='\"psa/crypto_platform_alt.h\"' -DMBEDTLS_PSA_CRYPTO_STRUCT_FILE='\"psa/crypto_struct_alt.h\"'" lib
-    make -C programs -o fuzz CFLAGS="-I ../tests/include/alt-extra -DMBEDTLS_PSA_CRYPTO_PLATFORM_FILE='\"psa/crypto_platform_alt.h\"' -DMBEDTLS_PSA_CRYPTO_STRUCT_FILE='\"psa/crypto_struct_alt.h\"'"
-
-    # Check that we're getting the alternative include guards and not the
-    # original include guards.
-    programs/test/query_included_headers | grep -x PSA_CRYPTO_PLATFORM_ALT_H
-    programs/test/query_included_headers | grep -x PSA_CRYPTO_STRUCT_ALT_H
-    programs/test/query_included_headers | not grep -x PSA_CRYPTO_PLATFORM_H
-    programs/test/query_included_headers | not grep -x PSA_CRYPTO_STRUCT_H
-}
-
-component_test_m32_no_asm () {
-    # Build without assembly, so as to use portable C code (in a 32-bit
-    # build) and not the i386-specific inline assembly.
-    #
-    # Note that we require gcc, because clang Asan builds fail to link for
-    # this target (cannot find libclang_rt.lsan-i386.a - this is a known clang issue).
-    msg "build: i386, make, gcc, no asm (ASan build)" # ~ 30s
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_HAVE_ASM
-    scripts/config.py unset MBEDTLS_PADLOCK_C
-    scripts/config.py unset MBEDTLS_AESNI_C # AESNI for 32-bit is tested in test_aesni_m32
-    make CC=gcc CFLAGS="$ASAN_CFLAGS -m32" LDFLAGS="-m32 $ASAN_CFLAGS"
-
-    msg "test: i386, make, gcc, no asm (ASan build)"
-    make test
-}
-support_test_m32_no_asm () {
-    case $(uname -m) in
-        amd64|x86_64) true;;
-        *) false;;
-    esac
-}
-
-component_test_m32_o2 () {
-    # Build with optimization, to use the i386 specific inline assembly
-    # and go faster for tests.
-    msg "build: i386, make, gcc -O2 (ASan build)" # ~ 30s
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_AESNI_C # AESNI for 32-bit is tested in test_aesni_m32
-    make CC=gcc CFLAGS="$ASAN_CFLAGS -m32" LDFLAGS="-m32 $ASAN_CFLAGS"
-
-    msg "test: i386, make, gcc -O2 (ASan build)"
-    make test
-
-    msg "test ssl-opt.sh, i386, make, gcc-O2"
-    tests/ssl-opt.sh
-}
-support_test_m32_o2 () {
-    support_test_m32_no_asm "$@"
-}
-
-component_test_m32_everest () {
-    msg "build: i386, Everest ECDH context (ASan build)" # ~ 6 min
-    scripts/config.py set MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED
-    scripts/config.py unset MBEDTLS_AESNI_C # AESNI for 32-bit is tested in test_aesni_m32
-    make CC=gcc CFLAGS="$ASAN_CFLAGS -m32" LDFLAGS="-m32 $ASAN_CFLAGS"
-
-    msg "test: i386, Everest ECDH context - main suites (inc. selftests) (ASan build)" # ~ 50s
-    make test
-
-    msg "test: i386, Everest ECDH context - ECDH-related part of ssl-opt.sh (ASan build)" # ~ 5s
-    tests/ssl-opt.sh -f ECDH
-
-    msg "test: i386, Everest ECDH context - compat.sh with some ECDH ciphersuites (ASan build)" # ~ 3 min
-    # Exclude some symmetric ciphers that are redundant here to gain time.
-    tests/compat.sh -f ECDH -V NO -e 'ARIA\|CAMELLIA\|CHACHA'
-}
-support_test_m32_everest () {
-    support_test_m32_no_asm "$@"
-}
-
-component_test_mx32 () {
-    msg "build: 64-bit ILP32, make, gcc" # ~ 30s
-    scripts/config.py full
-    make CC=gcc CFLAGS='-O2 -Werror -Wall -Wextra -mx32' LDFLAGS='-mx32'
-
-    msg "test: 64-bit ILP32, make, gcc"
-    make test
-}
-support_test_mx32 () {
-    case $(uname -m) in
-        amd64|x86_64) true;;
-        *) false;;
-    esac
-}
-
-component_test_min_mpi_window_size () {
-    msg "build: Default + MBEDTLS_MPI_WINDOW_SIZE=1 (ASan build)" # ~ 10s
-    scripts/config.py set MBEDTLS_MPI_WINDOW_SIZE 1
-    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: MBEDTLS_MPI_WINDOW_SIZE=1 - main suites (inc. selftests) (ASan build)" # ~ 10s
-    make test
-}
-
-component_test_have_int32 () {
-    msg "build: gcc, force 32-bit bignum limbs"
-    scripts/config.py unset MBEDTLS_HAVE_ASM
-    scripts/config.py unset MBEDTLS_AESNI_C
-    scripts/config.py unset MBEDTLS_PADLOCK_C
-    scripts/config.py unset MBEDTLS_AESCE_C
-    make CC=gcc CFLAGS='-O2 -Werror -Wall -Wextra -DMBEDTLS_HAVE_INT32'
-
-    msg "test: gcc, force 32-bit bignum limbs"
-    make test
-}
-
-component_test_have_int64 () {
-    msg "build: gcc, force 64-bit bignum limbs"
-    scripts/config.py unset MBEDTLS_HAVE_ASM
-    scripts/config.py unset MBEDTLS_AESNI_C
-    scripts/config.py unset MBEDTLS_PADLOCK_C
-    scripts/config.py unset MBEDTLS_AESCE_C
-    make CC=gcc CFLAGS='-O2 -Werror -Wall -Wextra -DMBEDTLS_HAVE_INT64'
-
-    msg "test: gcc, force 64-bit bignum limbs"
-    make test
-}
-
-component_test_have_int32_cmake_new_bignum () {
-    msg "build: gcc, force 32-bit bignum limbs, new bignum interface, test hooks (ASan build)"
-    scripts/config.py unset MBEDTLS_HAVE_ASM
-    scripts/config.py unset MBEDTLS_AESNI_C
-    scripts/config.py unset MBEDTLS_PADLOCK_C
-    scripts/config.py unset MBEDTLS_AESCE_C
-    scripts/config.py set MBEDTLS_TEST_HOOKS
-    scripts/config.py set MBEDTLS_ECP_WITH_MPI_UINT
-    make CC=gcc CFLAGS="$ASAN_CFLAGS -Werror -Wall -Wextra -DMBEDTLS_HAVE_INT32" LDFLAGS="$ASAN_CFLAGS"
-
-    msg "test: gcc, force 32-bit bignum limbs, new bignum interface, test hooks (ASan build)"
-    make test
-}
-
-component_test_no_udbl_division () {
-    msg "build: MBEDTLS_NO_UDBL_DIVISION native" # ~ 10s
-    scripts/config.py full
-    scripts/config.py set MBEDTLS_NO_UDBL_DIVISION
-    make CFLAGS='-Werror -O1'
-
-    msg "test: MBEDTLS_NO_UDBL_DIVISION native" # ~ 10s
-    make test
-}
-
-component_test_no_64bit_multiplication () {
-    msg "build: MBEDTLS_NO_64BIT_MULTIPLICATION native" # ~ 10s
-    scripts/config.py full
-    scripts/config.py set MBEDTLS_NO_64BIT_MULTIPLICATION
-    make CFLAGS='-Werror -O1'
-
-    msg "test: MBEDTLS_NO_64BIT_MULTIPLICATION native" # ~ 10s
-    make test
-}
-
-component_test_no_strings () {
-    msg "build: no strings" # ~10s
-    scripts/config.py full
-    # Disable options that activate a large amount of string constants.
-    scripts/config.py unset MBEDTLS_DEBUG_C
-    scripts/config.py unset MBEDTLS_ERROR_C
-    scripts/config.py set MBEDTLS_ERROR_STRERROR_DUMMY
-    scripts/config.py unset MBEDTLS_VERSION_FEATURES
-    make CFLAGS='-Werror -Os'
-
-    msg "test: no strings" # ~ 10s
-    make test
-}
-
-component_test_no_x509_info () {
-    msg "build: full + MBEDTLS_X509_REMOVE_INFO" # ~ 10s
-    scripts/config.pl full
-    scripts/config.pl unset MBEDTLS_MEMORY_BACKTRACE # too slow for tests
-    scripts/config.pl set MBEDTLS_X509_REMOVE_INFO
-    make CFLAGS='-Werror -O2'
-
-    msg "test: full + MBEDTLS_X509_REMOVE_INFO" # ~ 10s
-    make test
-
-    msg "test: ssl-opt.sh, full + MBEDTLS_X509_REMOVE_INFO" # ~ 1 min
-    tests/ssl-opt.sh
-}
-
-component_build_arm_none_eabi_gcc () {
-    msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -O1, baremetal+debug" # ~ 10s
-    scripts/config.py baremetal
-    make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-std=c99 -Werror -Wall -Wextra -O1' lib
-
-    msg "size: ${ARM_NONE_EABI_GCC_PREFIX}gcc -O1, baremetal+debug"
-    ${ARM_NONE_EABI_GCC_PREFIX}size -t library/*.o
-}
-
-component_build_arm_linux_gnueabi_gcc_arm5vte () {
-    msg "build: ${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc -march=arm5vte, baremetal+debug" # ~ 10s
-    scripts/config.py baremetal
-    # Build for a target platform that's close to what Debian uses
-    # for its "armel" distribution (https://wiki.debian.org/ArmEabiPort).
-    # See https://github.com/Mbed-TLS/mbedtls/pull/2169 and comments.
-    # Build everything including programs, see for example
-    # https://github.com/Mbed-TLS/mbedtls/pull/3449#issuecomment-675313720
-    make CC="${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc" AR="${ARM_LINUX_GNUEABI_GCC_PREFIX}ar" CFLAGS='-Werror -Wall -Wextra -march=armv5te -O1' LDFLAGS='-march=armv5te'
-
-    msg "size: ${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc -march=armv5te -O1, baremetal+debug"
-    ${ARM_LINUX_GNUEABI_GCC_PREFIX}size -t library/*.o
-}
-support_build_arm_linux_gnueabi_gcc_arm5vte () {
-    type ${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc >/dev/null 2>&1
-}
-
-component_build_arm_none_eabi_gcc_arm5vte () {
-    msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -march=arm5vte, baremetal+debug" # ~ 10s
-    scripts/config.py baremetal
-    # This is an imperfect substitute for
-    # component_build_arm_linux_gnueabi_gcc_arm5vte
-    # in case the gcc-arm-linux-gnueabi toolchain is not available
-    make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" CFLAGS='-std=c99 -Werror -Wall -Wextra -march=armv5te -O1' LDFLAGS='-march=armv5te' SHELL='sh -x' lib
-
-    msg "size: ${ARM_NONE_EABI_GCC_PREFIX}gcc -march=armv5te -O1, baremetal+debug"
-    ${ARM_NONE_EABI_GCC_PREFIX}size -t library/*.o
-}
-
-component_build_arm_none_eabi_gcc_m0plus () {
-    msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -mthumb -mcpu=cortex-m0plus, baremetal_size" # ~ 10s
-    scripts/config.py baremetal_size
-    make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-std=c99 -Werror -Wall -Wextra -mthumb -mcpu=cortex-m0plus -Os' lib
-
-    msg "size: ${ARM_NONE_EABI_GCC_PREFIX}gcc -mthumb -mcpu=cortex-m0plus -Os, baremetal_size"
-    ${ARM_NONE_EABI_GCC_PREFIX}size -t library/*.o
-    for lib in library/*.a; do
-        echo "$lib:"
-        ${ARM_NONE_EABI_GCC_PREFIX}size -t $lib | grep TOTALS
-    done
-}
-
-component_build_arm_none_eabi_gcc_no_udbl_division () {
-    msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -DMBEDTLS_NO_UDBL_DIVISION, make" # ~ 10s
-    scripts/config.py baremetal
-    scripts/config.py set MBEDTLS_NO_UDBL_DIVISION
-    make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-std=c99 -Werror -Wall -Wextra' lib
-    echo "Checking that software 64-bit division is not required"
-    not grep __aeabi_uldiv library/*.o
-}
-
-component_build_arm_none_eabi_gcc_no_64bit_multiplication () {
-    msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc MBEDTLS_NO_64BIT_MULTIPLICATION, make" # ~ 10s
-    scripts/config.py baremetal
-    scripts/config.py set MBEDTLS_NO_64BIT_MULTIPLICATION
-    make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-std=c99 -Werror -O1 -march=armv6-m -mthumb' lib
-    echo "Checking that software 64-bit multiplication is not required"
-    not grep __aeabi_lmul library/*.o
-}
-
-component_build_arm_clang_thumb () {
-    # ~ 30s
-
-    scripts/config.py baremetal
-
-    msg "build: clang thumb 2, make"
-    make clean
-    make CC="clang" CFLAGS='-std=c99 -Werror -Os --target=arm-linux-gnueabihf -march=armv7-m -mthumb' lib
-
-    # Some Thumb 1 asm is sensitive to optimisation level, so test both -O0 and -Os
-    msg "build: clang thumb 1 -O0, make"
-    make clean
-    make CC="clang" CFLAGS='-std=c99 -Werror -O0 --target=arm-linux-gnueabihf -mcpu=arm1136j-s -mthumb' lib
-
-    msg "build: clang thumb 1 -Os, make"
-    make clean
-    make CC="clang" CFLAGS='-std=c99 -Werror -Os --target=arm-linux-gnueabihf -mcpu=arm1136j-s -mthumb' lib
-}
-
-component_build_armcc () {
-    msg "build: ARM Compiler 5"
-    scripts/config.py baremetal
-    # armc[56] don't support SHA-512 intrinsics
-    scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT
-
-    # older versions of armcc/armclang don't support AESCE_C on 32-bit Arm
-    scripts/config.py unset MBEDTLS_AESCE_C
-
-    # Stop armclang warning about feature detection for A64_CRYPTO.
-    # With this enabled, the library does build correctly under armclang,
-    # but in baremetal builds (as tested here), feature detection is
-    # unavailable, and the user is notified via a #warning. So enabling
-    # this feature would prevent us from building with -Werror on
-    # armclang. Tracked in #7198.
-    scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
-
-    scripts/config.py set MBEDTLS_HAVE_ASM
-
-    make CC="$ARMC5_CC" AR="$ARMC5_AR" WARNING_CFLAGS='--strict --c99' lib
-
-    msg "size: ARM Compiler 5"
-    "$ARMC5_FROMELF" -z library/*.o
-
-    # Compile mostly with -O1 since some Arm inline assembly is disabled for -O0.
-
-    # ARM Compiler 6 - Target ARMv7-A
-    armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-a"
-
-    # ARM Compiler 6 - Target ARMv7-M
-    armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-m"
-
-    # ARM Compiler 6 - Target ARMv7-M+DSP
-    armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-m+dsp"
-
-    # ARM Compiler 6 - Target ARMv8-A - AArch32
-    armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv8.2-a"
-
-    # ARM Compiler 6 - Target ARMv8-M
-    armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv8-m.main"
-
-    # ARM Compiler 6 - Target Cortex-M0 - no optimisation
-    armc6_build_test "-O0 --target=arm-arm-none-eabi -mcpu=cortex-m0"
-
-    # ARM Compiler 6 - Target Cortex-M0
-    armc6_build_test "-Os --target=arm-arm-none-eabi -mcpu=cortex-m0"
-
-    # ARM Compiler 6 - Target ARMv8.2-A - AArch64
-    #
-    # Re-enable MBEDTLS_AESCE_C as this should be supported by the version of armclang
-    # that we have in our CI
-    scripts/config.py set MBEDTLS_AESCE_C
-    armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8.2-a+crypto"
-}
-
-support_build_armcc () {
-    armc5_cc="$ARMC5_BIN_DIR/armcc"
-    armc6_cc="$ARMC6_BIN_DIR/armclang"
-    (check_tools "$armc5_cc" "$armc6_cc" > /dev/null 2>&1)
-}
-
-component_test_tls12_only () {
-    msg "build: default config without MBEDTLS_SSL_PROTO_TLS1_3, cmake, gcc, ASan"
-    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
-    CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-
-    msg "test: main suites (inc. selftests) (ASan build)"
-    make test
-
-    msg "test: ssl-opt.sh (ASan build)"
-    tests/ssl-opt.sh
-
-    msg "test: compat.sh (ASan build)"
-    tests/compat.sh
-}
-
-component_test_tls13_only () {
-    msg "build: default config without MBEDTLS_SSL_PROTO_TLS1_2"
-    scripts/config.py set MBEDTLS_SSL_EARLY_DATA
-    scripts/config.py set MBEDTLS_SSL_RECORD_SIZE_LIMIT
-    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
-
-    msg "test: TLS 1.3 only, all key exchange modes enabled"
-    make test
-
-    msg "ssl-opt.sh: TLS 1.3 only, all key exchange modes enabled"
-    tests/ssl-opt.sh
-}
-
-component_test_tls13_only_psk () {
-    msg "build: TLS 1.3 only from default, only PSK key exchange mode"
-    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
-    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
-    scripts/config.py unset MBEDTLS_ECDH_C
-    scripts/config.py unset MBEDTLS_DHM_C
-    scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
-    scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
-    scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
-    scripts/config.py unset MBEDTLS_ECDSA_C
-    scripts/config.py unset MBEDTLS_PKCS1_V21
-    scripts/config.py unset MBEDTLS_PKCS7_C
-    scripts/config.py set   MBEDTLS_SSL_EARLY_DATA
-    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
-
-    msg "test_suite_ssl: TLS 1.3 only, only PSK key exchange mode enabled"
-    cd tests; ./test_suite_ssl; cd ..
-
-    msg "ssl-opt.sh: TLS 1.3 only, only PSK key exchange mode enabled"
-    tests/ssl-opt.sh
-}
-
-component_test_tls13_only_ephemeral () {
-    msg "build: TLS 1.3 only from default, only ephemeral key exchange mode"
-    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
-    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
-    scripts/config.py unset MBEDTLS_SSL_EARLY_DATA
-    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
-
-    msg "test_suite_ssl: TLS 1.3 only, only ephemeral key exchange mode"
-    cd tests; ./test_suite_ssl; cd ..
-
-    msg "ssl-opt.sh: TLS 1.3 only, only ephemeral key exchange mode"
-    tests/ssl-opt.sh
-}
-
-component_test_tls13_only_ephemeral_ffdh () {
-    msg "build: TLS 1.3 only from default, only ephemeral ffdh key exchange mode"
-    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
-    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
-    scripts/config.py unset MBEDTLS_SSL_EARLY_DATA
-    scripts/config.py unset MBEDTLS_ECDH_C
-
-    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
-
-    msg "test_suite_ssl: TLS 1.3 only, only ephemeral ffdh key exchange mode"
-    cd tests; ./test_suite_ssl; cd ..
-
-    msg "ssl-opt.sh: TLS 1.3 only, only ephemeral ffdh key exchange mode"
-    tests/ssl-opt.sh
-}
-
-component_test_tls13_only_psk_ephemeral () {
-    msg "build: TLS 1.3 only from default, only PSK ephemeral key exchange mode"
-    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
-    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
-    scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
-    scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
-    scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
-    scripts/config.py unset MBEDTLS_ECDSA_C
-    scripts/config.py unset MBEDTLS_PKCS1_V21
-    scripts/config.py unset MBEDTLS_PKCS7_C
-    scripts/config.py set   MBEDTLS_SSL_EARLY_DATA
-    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
-
-    msg "test_suite_ssl: TLS 1.3 only, only PSK ephemeral key exchange mode"
-    cd tests; ./test_suite_ssl; cd ..
-
-    msg "ssl-opt.sh: TLS 1.3 only, only PSK ephemeral key exchange mode"
-    tests/ssl-opt.sh
-}
-
-component_test_tls13_only_psk_ephemeral_ffdh () {
-    msg "build: TLS 1.3 only from default, only PSK ephemeral ffdh key exchange mode"
-    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
-    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
-    scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
-    scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
-    scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
-    scripts/config.py unset MBEDTLS_ECDSA_C
-    scripts/config.py unset MBEDTLS_PKCS1_V21
-    scripts/config.py unset MBEDTLS_PKCS7_C
-    scripts/config.py set   MBEDTLS_SSL_EARLY_DATA
-    scripts/config.py unset MBEDTLS_ECDH_C
-    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
-
-    msg "test_suite_ssl: TLS 1.3 only, only PSK ephemeral ffdh key exchange mode"
-    cd tests; ./test_suite_ssl; cd ..
-
-    msg "ssl-opt.sh: TLS 1.3 only, only PSK ephemeral ffdh key exchange mode"
-    tests/ssl-opt.sh
-}
-
-component_test_tls13_only_psk_all () {
-    msg "build: TLS 1.3 only from default, without ephemeral key exchange mode"
-    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
-    scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
-    scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
-    scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
-    scripts/config.py unset MBEDTLS_ECDSA_C
-    scripts/config.py unset MBEDTLS_PKCS1_V21
-    scripts/config.py unset MBEDTLS_PKCS7_C
-    scripts/config.py set   MBEDTLS_SSL_EARLY_DATA
-    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
-
-    msg "test_suite_ssl: TLS 1.3 only, PSK and PSK ephemeral key exchange modes"
-    cd tests; ./test_suite_ssl; cd ..
-
-    msg "ssl-opt.sh: TLS 1.3 only, PSK and PSK ephemeral key exchange modes"
-    tests/ssl-opt.sh
-}
-
-component_test_tls13_only_ephemeral_all () {
-    msg "build: TLS 1.3 only from default, without PSK key exchange mode"
-    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
-    scripts/config.py set   MBEDTLS_SSL_EARLY_DATA
-    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
-
-    msg "test_suite_ssl: TLS 1.3 only, ephemeral and PSK ephemeral key exchange modes"
-    cd tests; ./test_suite_ssl; cd ..
-
-    msg "ssl-opt.sh: TLS 1.3 only, ephemeral and PSK ephemeral key exchange modes"
-    tests/ssl-opt.sh
-}
-
-component_test_tls13_no_padding () {
-    msg "build: default config plus early data minus padding"
-    scripts/config.py set MBEDTLS_SSL_CID_TLS1_3_PADDING_GRANULARITY 1
-    scripts/config.py set MBEDTLS_SSL_EARLY_DATA
-    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-    msg "test: default config plus early data minus padding"
-    make test
-    msg "ssl-opt.sh (TLS 1.3 no padding)"
-    tests/ssl-opt.sh
-}
-
-component_test_tls13_no_compatibility_mode () {
-    msg "build: default config plus early data minus middlebox compatibility mode"
-    scripts/config.py unset MBEDTLS_SSL_TLS1_3_COMPATIBILITY_MODE
-    scripts/config.py set   MBEDTLS_SSL_EARLY_DATA
-    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-    msg "test: default config plus early data minus middlebox compatibility mode"
-    make test
-    msg "ssl-opt.sh (TLS 1.3 no compatibility mode)"
-    tests/ssl-opt.sh
-}
-
-component_test_full_minus_session_tickets () {
-    msg "build: full config without session tickets"
-    scripts/config.py full
-    scripts/config.py unset MBEDTLS_SSL_SESSION_TICKETS
-    scripts/config.py unset MBEDTLS_SSL_EARLY_DATA
-    CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
-    make
-    msg "test: full config without session tickets"
-    make test
-    msg "ssl-opt.sh (full config without session tickets)"
-    tests/ssl-opt.sh
-}
-
-component_build_mingw () {
-    msg "build: Windows cross build - mingw64, make (Link Library)" # ~ 30s
-    make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -Wall -Wextra -maes -msse2 -mpclmul' WINDOWS_BUILD=1 lib programs
-
-    # note Make tests only builds the tests, but doesn't run them
-    make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -maes -msse2 -mpclmul' WINDOWS_BUILD=1 tests
-    make WINDOWS_BUILD=1 clean
-
-    msg "build: Windows cross build - mingw64, make (DLL)" # ~ 30s
-    make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -Wall -Wextra -maes -msse2 -mpclmul' WINDOWS_BUILD=1 SHARED=1 lib programs
-    make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -Wall -Wextra -maes -msse2 -mpclmul' WINDOWS_BUILD=1 SHARED=1 tests
-    make WINDOWS_BUILD=1 clean
-
-    msg "build: Windows cross build - mingw64, make (Library only, default config without MBEDTLS_AESNI_C)" # ~ 30s
-    ./scripts/config.py unset MBEDTLS_AESNI_C #
-    make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -Wall -Wextra' WINDOWS_BUILD=1 lib
-    make WINDOWS_BUILD=1 clean
-}
-support_build_mingw () {
-    case $(i686-w64-mingw32-gcc -dumpversion 2>/dev/null) in
-        [0-5]*|"") false;;
-        *) true;;
-    esac
-}
-
-component_test_memsan () {
-    msg "build: MSan (clang)" # ~ 1 min 20s
-    scripts/config.py unset MBEDTLS_AESNI_C # memsan doesn't grok asm
-    CC=clang cmake -D CMAKE_BUILD_TYPE:String=MemSan .
-    make
-
-    msg "test: main suites (MSan)" # ~ 10s
-    make test
-
-    msg "test: metatests (MSan)"
-    tests/scripts/run-metatests.sh any msan
-
-    msg "program demos (MSan)" # ~20s
-    tests/scripts/run_demos.py
-
-    msg "test: ssl-opt.sh (MSan)" # ~ 1 min
-    tests/ssl-opt.sh
-
-    # Optional part(s)
-
-    if [ "$MEMORY" -gt 0 ]; then
-        msg "test: compat.sh (MSan)" # ~ 6 min 20s
-        tests/compat.sh
-    fi
-}
-
-component_release_test_valgrind () {
-    msg "build: Release (clang)"
-    # default config, in particular without MBEDTLS_USE_PSA_CRYPTO
-    CC=clang cmake -D CMAKE_BUILD_TYPE:String=Release .
-    make
-
-    msg "test: main suites, Valgrind (default config)"
-    make memcheck
-
-    # Optional parts (slow; currently broken on OS X because programs don't
-    # seem to receive signals under valgrind on OS X).
-    # These optional parts don't run on the CI.
-    if [ "$MEMORY" -gt 0 ]; then
-        msg "test: ssl-opt.sh --memcheck (default config)"
-        tests/ssl-opt.sh --memcheck
-    fi
-
-    if [ "$MEMORY" -gt 1 ]; then
-        msg "test: compat.sh --memcheck (default config)"
-        tests/compat.sh --memcheck
-    fi
-
-    if [ "$MEMORY" -gt 0 ]; then
-        msg "test: context-info.sh --memcheck (default config)"
-        tests/context-info.sh --memcheck
-    fi
-}
-
-component_release_test_valgrind_psa () {
-    msg "build: Release, full (clang)"
-    # full config, in particular with MBEDTLS_USE_PSA_CRYPTO
-    scripts/config.py full
-    CC=clang cmake -D CMAKE_BUILD_TYPE:String=Release .
-    make
-
-    msg "test: main suites, Valgrind (full config)"
-    make memcheck
-}
-
-support_test_cmake_out_of_source () {
-    distrib_id=""
-    distrib_ver=""
-    distrib_ver_minor=""
-    distrib_ver_major=""
-
-    # Attempt to parse lsb-release to find out distribution and version. If not
-    # found this should fail safe (test is supported).
-    if [[ -f /etc/lsb-release ]]; then
-
-        while read -r lsb_line; do
-            case "$lsb_line" in
-                "DISTRIB_ID"*) distrib_id=${lsb_line/#DISTRIB_ID=};;
-                "DISTRIB_RELEASE"*) distrib_ver=${lsb_line/#DISTRIB_RELEASE=};;
-            esac
-        done < /etc/lsb-release
-
-        distrib_ver_major="${distrib_ver%%.*}"
-        distrib_ver="${distrib_ver#*.}"
-        distrib_ver_minor="${distrib_ver%%.*}"
-    fi
-
-    # Running the out of source CMake test on Ubuntu 16.04 using more than one
-    # processor (as the CI does) can create a race condition whereby the build
-    # fails to see a generated file, despite that file actually having been
-    # generated. This problem appears to go away with 18.04 or newer, so make
-    # the out of source tests unsupported on Ubuntu 16.04.
-    [ "$distrib_id" != "Ubuntu" ] || [ "$distrib_ver_major" -gt 16 ]
-}
-
-component_test_cmake_out_of_source () {
-    # Remove existing generated files so that we use the ones cmake
-    # generates
-    make neat
-
-    msg "build: cmake 'out-of-source' build"
-    MBEDTLS_ROOT_DIR="$PWD"
-    mkdir "$OUT_OF_SOURCE_DIR"
-    cd "$OUT_OF_SOURCE_DIR"
-    # Note: Explicitly generate files as these are turned off in releases
-    cmake -D CMAKE_BUILD_TYPE:String=Check -D GEN_FILES=ON "$MBEDTLS_ROOT_DIR"
-    make
-
-    msg "test: cmake 'out-of-source' build"
-    make test
-    # Check that ssl-opt.sh can find the test programs.
-    # Also ensure that there are no error messages such as
-    # "No such file or directory", which would indicate that some required
-    # file is missing (ssl-opt.sh tolerates the absence of some files so
-    # may exit with status 0 but emit errors).
-    ./tests/ssl-opt.sh -f 'Default' >ssl-opt.out 2>ssl-opt.err
-    grep PASS ssl-opt.out
-    cat ssl-opt.err >&2
-    # If ssl-opt.err is non-empty, record an error and keep going.
-    [ ! -s ssl-opt.err ]
-    rm ssl-opt.out ssl-opt.err
-    cd "$MBEDTLS_ROOT_DIR"
-    rm -rf "$OUT_OF_SOURCE_DIR"
-}
-
-component_test_cmake_as_subdirectory () {
-    # Remove existing generated files so that we use the ones CMake
-    # generates
-    make neat
-
-    msg "build: cmake 'as-subdirectory' build"
-    cd programs/test/cmake_subproject
-    # Note: Explicitly generate files as these are turned off in releases
-    cmake -D GEN_FILES=ON .
-    make
-    ./cmake_subproject
-}
-support_test_cmake_as_subdirectory () {
-    support_test_cmake_out_of_source
-}
-
-component_test_cmake_as_package () {
-    # Remove existing generated files so that we use the ones CMake
-    # generates
-    make neat
-
-    msg "build: cmake 'as-package' build"
-    cd programs/test/cmake_package
-    cmake .
-    make
-    ./cmake_package
-}
-support_test_cmake_as_package () {
-    support_test_cmake_out_of_source
-}
-
-component_test_cmake_as_package_install () {
-    # Remove existing generated files so that we use the ones CMake
-    # generates
-    make neat
-
-    msg "build: cmake 'as-installed-package' build"
-    cd programs/test/cmake_package_install
-    cmake .
-    make
-    ./cmake_package_install
-}
-support_test_cmake_as_package_install () {
-    support_test_cmake_out_of_source
-}
-
-component_build_cmake_custom_config_file () {
-    # Make a copy of config file to use for the in-tree test
-    cp "$CONFIG_H" include/mbedtls_config_in_tree_copy.h
-
-    MBEDTLS_ROOT_DIR="$PWD"
-    mkdir "$OUT_OF_SOURCE_DIR"
-    cd "$OUT_OF_SOURCE_DIR"
-
-    # Build once to get the generated files (which need an intact config file)
-    cmake "$MBEDTLS_ROOT_DIR"
-    make
-
-    msg "build: cmake with -DMBEDTLS_CONFIG_FILE"
-    scripts/config.py -w full_config.h full
-    echo '#error "cmake -DMBEDTLS_CONFIG_FILE is not working."' > "$MBEDTLS_ROOT_DIR/$CONFIG_H"
-    cmake -DGEN_FILES=OFF -DMBEDTLS_CONFIG_FILE=full_config.h "$MBEDTLS_ROOT_DIR"
-    make
-
-    msg "build: cmake with -DMBEDTLS_CONFIG_FILE + -DMBEDTLS_USER_CONFIG_FILE"
-    # In the user config, disable one feature (for simplicity, pick a feature
-    # that nothing else depends on).
-    echo '#undef MBEDTLS_NIST_KW_C' >user_config.h
-
-    cmake -DGEN_FILES=OFF -DMBEDTLS_CONFIG_FILE=full_config.h -DMBEDTLS_USER_CONFIG_FILE=user_config.h "$MBEDTLS_ROOT_DIR"
-    make
-    not programs/test/query_compile_time_config MBEDTLS_NIST_KW_C
-
-    rm -f user_config.h full_config.h
-
-    cd "$MBEDTLS_ROOT_DIR"
-    rm -rf "$OUT_OF_SOURCE_DIR"
-
-    # Now repeat the test for an in-tree build:
-
-    # Restore config for the in-tree test
-    mv include/mbedtls_config_in_tree_copy.h "$CONFIG_H"
-
-    # Build once to get the generated files (which need an intact config)
-    cmake .
-    make
-
-    msg "build: cmake (in-tree) with -DMBEDTLS_CONFIG_FILE"
-    scripts/config.py -w full_config.h full
-    echo '#error "cmake -DMBEDTLS_CONFIG_FILE is not working."' > "$MBEDTLS_ROOT_DIR/$CONFIG_H"
-    cmake -DGEN_FILES=OFF -DMBEDTLS_CONFIG_FILE=full_config.h .
-    make
-
-    msg "build: cmake (in-tree) with -DMBEDTLS_CONFIG_FILE + -DMBEDTLS_USER_CONFIG_FILE"
-    # In the user config, disable one feature (for simplicity, pick a feature
-    # that nothing else depends on).
-    echo '#undef MBEDTLS_NIST_KW_C' >user_config.h
-
-    cmake -DGEN_FILES=OFF -DMBEDTLS_CONFIG_FILE=full_config.h -DMBEDTLS_USER_CONFIG_FILE=user_config.h .
-    make
-    not programs/test/query_compile_time_config MBEDTLS_NIST_KW_C
-
-    rm -f user_config.h full_config.h
-}
-support_build_cmake_custom_config_file () {
-    support_test_cmake_out_of_source
-}
-
-component_build_cmake_programs_no_testing () {
-    # Verify that the type of builds performed by oss-fuzz don't get accidentally broken
-    msg "build: cmake with -DENABLE_PROGRAMS=ON and -DENABLE_TESTING=OFF"
-    cmake -DENABLE_PROGRAMS=ON -DENABLE_TESTING=OFF .
-    make
-}
-support_build_cmake_programs_no_testing () {
-    support_test_cmake_out_of_source
-}
-
-component_build_zeroize_checks () {
-    msg "build: check for obviously wrong calls to mbedtls_platform_zeroize()"
-
-    scripts/config.py full
-
-    # Only compile - we're looking for sizeof-pointer-memaccess warnings
-    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/user-config-zeroize-memset.h\"' -DMBEDTLS_TEST_DEFINES_ZEROIZE -Werror -Wsizeof-pointer-memaccess"
-}
-
-
-component_test_zeroize () {
-    # Test that the function mbedtls_platform_zeroize() is not optimized away by
-    # different combinations of compilers and optimization flags by using an
-    # auxiliary GDB script. Unfortunately, GDB does not return error values to the
-    # system in all cases that the script fails, so we must manually search the
-    # output to check whether the pass string is present and no failure strings
-    # were printed.
-
-    # Don't try to disable ASLR. We don't care about ASLR here. We do care
-    # about a spurious message if Gdb tries and fails, so suppress that.
-    gdb_disable_aslr=
-    if [ -z "$(gdb -batch -nw -ex 'set disable-randomization off' 2>&1)" ]; then
-        gdb_disable_aslr='set disable-randomization off'
-    fi
-
-    for optimization_flag in -O2 -O3 -Ofast -Os; do
-        for compiler in clang gcc; do
-            msg "test: $compiler $optimization_flag, mbedtls_platform_zeroize()"
-            make programs CC="$compiler" DEBUG=1 CFLAGS="$optimization_flag"
-            gdb -ex "$gdb_disable_aslr" -x tests/scripts/test_zeroize.gdb -nw -batch -nx 2>&1 | tee test_zeroize.log
-            grep "The buffer was correctly zeroized" test_zeroize.log
-            not grep -i "error" test_zeroize.log
-            rm -f test_zeroize.log
-            make clean
-        done
-    done
-}
-
-component_test_psa_compliance () {
-    # The arch tests build with gcc, so require use of gcc here to link properly
-    msg "build: make, default config (out-of-box), libmbedcrypto.a only"
-    CC=gcc make -C library libmbedcrypto.a
-
-    msg "unit test: test_psa_compliance.py"
-    CC=gcc ./tests/scripts/test_psa_compliance.py
-}
-
-support_test_psa_compliance () {
-    # psa-compliance-tests only supports CMake >= 3.10.0
-    ver="$(cmake --version)"
-    ver="${ver#cmake version }"
-    ver_major="${ver%%.*}"
-
-    ver="${ver#*.}"
-    ver_minor="${ver%%.*}"
-
-    [ "$ver_major" -eq 3 ] && [ "$ver_minor" -ge 10 ]
-}
-
-component_check_code_style () {
-    msg "Check C code style"
-    ./scripts/code_style.py
-}
-
-support_check_code_style () {
-    case $(uncrustify --version) in
-        *0.75.1*) true;;
-        *) false;;
-    esac
-}
-
-component_check_python_files () {
-    msg "Lint: Python scripts"
-    tests/scripts/check-python-files.sh
-}
-
-component_check_test_helpers () {
-    msg "unit test: generate_test_code.py"
-    # unittest writes out mundane stuff like number or tests run on stderr.
-    # Our convention is to reserve stderr for actual errors, and write
-    # harmless info on stdout so it can be suppress with --quiet.
-    ./framework/scripts/test_generate_test_code.py 2>&1
-
-    msg "unit test: translate_ciphers.py"
-    python3 -m unittest tests/scripts/translate_ciphers.py 2>&1
-}
-
+# Include the components from components.sh
+test_script_dir="${0%/*}"
+for file in "$test_script_dir"/components*.sh; do
+    source $file
+done
 
 ################################################################
 #### Termination
@@ -6453,8 +1016,6 @@
     final_report
 }
 
-
-
 ################################################################
 #### Run all the things
 ################################################################