diff --git a/tests/scripts/components.sh b/tests/scripts/components.sh
index 92bf05a..ed02287 100644
--- a/tests/scripts/components.sh
+++ b/tests/scripts/components.sh
@@ -40,3 +40,5445 @@
 ################################################################
 #### Build and test many configurations and targets
 ################################################################
+
+################################################################
+#### Basic checks
+################################################################
+
+#
+# Test Suites to be executed
+#
+# The test ordering tries to optimize for the following criteria:
+# 1. Catch possible problems early, by running first tests that run quickly
+#    and/or are more likely to fail than others (eg I use Clang most of the
+#    time, so start with a GCC build).
+# 2. Minimize total running time, by avoiding useless rebuilds
+#
+# Indicative running times are given for reference.
+
+component_check_recursion () {
+    msg "Check: recursion.pl" # < 1s
+    tests/scripts/recursion.pl library/*.c
+}
+
+component_check_generated_files () {
+    msg "Check: check-generated-files, files generated with make" # 2s
+    make generated_files
+    tests/scripts/check-generated-files.sh
+
+    msg "Check: check-generated-files -u, files present" # 2s
+    tests/scripts/check-generated-files.sh -u
+    # Check that the generated files are considered up to date.
+    tests/scripts/check-generated-files.sh
+
+    msg "Check: check-generated-files -u, files absent" # 2s
+    command make neat
+    tests/scripts/check-generated-files.sh -u
+    # Check that the generated files are considered up to date.
+    tests/scripts/check-generated-files.sh
+
+    # This component ends with the generated files present in the source tree.
+    # This is necessary for subsequent components!
+}
+
+component_check_doxy_blocks () {
+    msg "Check: doxygen markup outside doxygen blocks" # < 1s
+    tests/scripts/check-doxy-blocks.pl
+}
+
+component_check_files () {
+    msg "Check: file sanity checks (permissions, encodings)" # < 1s
+    tests/scripts/check_files.py
+}
+
+component_check_changelog () {
+    msg "Check: changelog entries" # < 1s
+    rm -f ChangeLog.new
+    scripts/assemble_changelog.py -o ChangeLog.new
+    if [ -e ChangeLog.new ]; then
+        # Show the diff for information. It isn't an error if the diff is
+        # non-empty.
+        diff -u ChangeLog ChangeLog.new || true
+        rm ChangeLog.new
+    fi
+}
+
+component_check_names () {
+    msg "Check: declared and exported names (builds the library)" # < 3s
+    tests/scripts/check_names.py -v
+}
+
+component_check_test_cases () {
+    msg "Check: test case descriptions" # < 1s
+    if [ $QUIET -eq 1 ]; then
+        opt='--quiet'
+    else
+        opt=''
+    fi
+    tests/scripts/check_test_cases.py -q $opt
+    unset opt
+}
+
+component_check_test_dependencies () {
+    msg "Check: test case dependencies: legacy vs PSA" # < 1s
+    # The purpose of this component is to catch unjustified dependencies on
+    # legacy feature macros (MBEDTLS_xxx) in PSA tests. Generally speaking,
+    # PSA test should use PSA feature macros (PSA_WANT_xxx, more rarely
+    # MBEDTLS_PSA_xxx).
+    #
+    # Most of the time, use of legacy MBEDTLS_xxx macros are mistakes, which
+    # this component is meant to catch. However a few of them are justified,
+    # mostly by the absence of a PSA equivalent, so this component includes a
+    # list of expected exceptions.
+
+    found="check-test-deps-found-$$"
+    expected="check-test-deps-expected-$$"
+
+    # Find legacy dependencies in PSA tests
+    grep 'depends_on' \
+        tests/suites/test_suite_psa*.data tests/suites/test_suite_psa*.function |
+        grep -Eo '!?MBEDTLS_[^: ]*' |
+        grep -v -e MBEDTLS_PSA_ -e MBEDTLS_TEST_ |
+        sort -u > $found
+
+    # Expected ones with justification - keep in sorted order by ASCII table!
+    rm -f $expected
+    # No PSA equivalent - WANT_KEY_TYPE_AES means all sizes
+    echo "!MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH" >> $expected
+    # No PSA equivalent - used to skip decryption tests in PSA-ECB, CBC/XTS/NIST_KW/DES
+    echo "!MBEDTLS_BLOCK_CIPHER_NO_DECRYPT" >> $expected
+    # MBEDTLS_ASN1_WRITE_C is used by import_rsa_made_up() in test_suite_psa_crypto
+    # in order to build a fake RSA key of the wanted size based on
+    # PSA_VENDOR_RSA_MAX_KEY_BITS. The legacy module is only used by
+    # the test code and that's probably the most convenient way of achieving
+    # the test's goal.
+    echo "MBEDTLS_ASN1_WRITE_C" >> $expected
+    # No PSA equivalent - we should probably have one in the future.
+    echo "MBEDTLS_ECP_RESTARTABLE" >> $expected
+    # No PSA equivalent - needed by some init tests
+    echo "MBEDTLS_ENTROPY_NV_SEED" >> $expected
+    # No PSA equivalent - required to run threaded tests.
+    echo "MBEDTLS_THREADING_PTHREAD" >> $expected
+
+    # Compare reality with expectation.
+    # We want an exact match, to ensure the above list remains up-to-date.
+    #
+    # The output should be empty. When it's not:
+    # - Each '+' line is a macro that was found but not expected. You want to
+    # find where that macro occurs, and either replace it with PSA macros, or
+    # add it to the exceptions list above with a justification.
+    # - Each '-' line is a macro that was expected but not found; it means the
+    # exceptions list above should be updated by removing that macro.
+    diff -U0 $expected $found
+
+    rm $found $expected
+}
+
+component_check_doxygen_warnings () {
+    msg "Check: doxygen warnings (builds the documentation)" # ~ 3s
+    tests/scripts/doxygen.sh
+}
+
+
+
+################################################################
+#### Build and test many configurations and targets
+################################################################
+
+component_test_default_out_of_box () {
+    msg "build: make, default config (out-of-box)" # ~1min
+    make
+    # Disable fancy stuff
+    unset MBEDTLS_TEST_OUTCOME_FILE
+
+    msg "test: main suites make, default config (out-of-box)" # ~10s
+    make test
+
+    msg "selftest: make, default config (out-of-box)" # ~10s
+    programs/test/selftest
+
+    msg "program demos: make, default config (out-of-box)" # ~10s
+    tests/scripts/run_demos.py
+}
+
+component_test_default_cmake_gcc_asan () {
+    msg "build: cmake, gcc, ASan" # ~ 1 min 50s
+    CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: main suites (inc. selftests) (ASan build)" # ~ 50s
+    make test
+
+    msg "program demos (ASan build)" # ~10s
+    tests/scripts/run_demos.py
+
+    msg "test: selftest (ASan build)" # ~ 10s
+    programs/test/selftest
+
+    msg "test: metatests (GCC, ASan build)"
+    tests/scripts/run-metatests.sh any asan poison
+
+    msg "test: ssl-opt.sh (ASan build)" # ~ 1 min
+    tests/ssl-opt.sh
+
+    msg "test: compat.sh (ASan build)" # ~ 6 min
+    tests/compat.sh
+
+    msg "test: context-info.sh (ASan build)" # ~ 15 sec
+    tests/context-info.sh
+}
+
+component_test_default_cmake_gcc_asan_new_bignum () {
+    msg "build: cmake, gcc, ASan" # ~ 1 min 50s
+    scripts/config.py set MBEDTLS_ECP_WITH_MPI_UINT
+    CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: main suites (inc. selftests) (ASan build)" # ~ 50s
+    make test
+
+    msg "test: selftest (ASan build)" # ~ 10s
+    programs/test/selftest
+
+    msg "test: ssl-opt.sh (ASan build)" # ~ 1 min
+    tests/ssl-opt.sh
+
+    msg "test: compat.sh (ASan build)" # ~ 6 min
+    tests/compat.sh
+
+    msg "test: context-info.sh (ASan build)" # ~ 15 sec
+    tests/context-info.sh
+}
+
+component_test_full_cmake_gcc_asan () {
+    msg "build: full config, cmake, gcc, ASan"
+    scripts/config.py full
+    CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: main suites (inc. selftests) (full config, ASan build)"
+    make test
+
+    msg "test: selftest (full config, ASan build)" # ~ 10s
+    programs/test/selftest
+
+    msg "test: ssl-opt.sh (full config, ASan build)"
+    tests/ssl-opt.sh
+
+    # Note: the next two invocations cover all compat.sh test cases.
+    # We should use the same here and in basic-build-test.sh.
+    msg "test: compat.sh: default version (full config, ASan build)"
+    tests/compat.sh -e 'ARIA\|CHACHA'
+
+    msg "test: compat.sh: next: ARIA, Chacha (full config, ASan build)"
+    env OPENSSL="$OPENSSL_NEXT" tests/compat.sh -e '^$' -f 'ARIA\|CHACHA'
+
+    msg "test: context-info.sh (full config, ASan build)" # ~ 15 sec
+    tests/context-info.sh
+}
+
+
+component_test_full_cmake_gcc_asan_new_bignum () {
+    msg "build: full config, cmake, gcc, ASan"
+    scripts/config.py full
+    scripts/config.py set MBEDTLS_ECP_WITH_MPI_UINT
+    CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: main suites (inc. selftests) (full config, new bignum, ASan)"
+    make test
+
+    msg "test: selftest (full config, new bignum, ASan)" # ~ 10s
+    programs/test/selftest
+
+    msg "test: ssl-opt.sh (full config, new bignum, ASan)"
+    tests/ssl-opt.sh
+
+    # Note: the next two invocations cover all compat.sh test cases.
+    # We should use the same here and in basic-build-test.sh.
+    msg "test: compat.sh: default version (full config, new bignum, ASan)"
+    tests/compat.sh -e 'ARIA\|CHACHA'
+
+    msg "test: compat.sh: next: ARIA, Chacha (full config, new bignum, ASan)"
+    env OPENSSL="$OPENSSL_NEXT" tests/compat.sh -e '^$' -f 'ARIA\|CHACHA'
+
+    msg "test: context-info.sh (full config, new bignum, ASan)" # ~ 15 sec
+    tests/context-info.sh
+}
+
+component_test_psa_crypto_key_id_encodes_owner () {
+    msg "build: full config + PSA_CRYPTO_KEY_ID_ENCODES_OWNER, cmake, gcc, ASan"
+    scripts/config.py full
+    scripts/config.py set MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
+    CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: full config - USE_PSA_CRYPTO + PSA_CRYPTO_KEY_ID_ENCODES_OWNER, cmake, gcc, ASan"
+    make test
+}
+
+component_test_psa_assume_exclusive_buffers () {
+    msg "build: full config + MBEDTLS_PSA_ASSUME_EXCLUSIVE_BUFFERS, cmake, gcc, ASan"
+    scripts/config.py full
+    scripts/config.py set MBEDTLS_PSA_ASSUME_EXCLUSIVE_BUFFERS
+    CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: full config + MBEDTLS_PSA_ASSUME_EXCLUSIVE_BUFFERS, cmake, gcc, ASan"
+    make test
+}
+
+# check_renamed_symbols HEADER LIB
+# Check that if HEADER contains '#define MACRO ...' then MACRO is not a symbol
+# name is LIB.
+check_renamed_symbols () {
+    ! nm "$2" | sed 's/.* //' |
+      grep -x -F "$(sed -n 's/^ *# *define  *\([A-Z_a-z][0-9A-Z_a-z]*\)..*/\1/p' "$1")"
+}
+
+component_build_psa_crypto_spm () {
+    msg "build: full config + PSA_CRYPTO_KEY_ID_ENCODES_OWNER + PSA_CRYPTO_SPM, make, gcc"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS
+    scripts/config.py set MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
+    scripts/config.py set MBEDTLS_PSA_CRYPTO_SPM
+    # We can only compile, not link, since our test and sample programs
+    # aren't equipped for the modified names used when MBEDTLS_PSA_CRYPTO_SPM
+    # is active.
+    make CC=gcc CFLAGS='-Werror -Wall -Wextra -I../tests/include/spe' lib
+
+    # Check that if a symbol is renamed by crypto_spe.h, the non-renamed
+    # version is not present.
+    echo "Checking for renamed symbols in the library"
+    check_renamed_symbols tests/include/spe/crypto_spe.h library/libmbedcrypto.a
+}
+
+# Get a list of library-wise undefined symbols and ensure that they only
+# belong to psa_xxx() functions and not to mbedtls_yyy() ones.
+# This function is a common helper used by both:
+# - component_test_default_psa_crypto_client_without_crypto_provider
+# - component_build_full_psa_crypto_client_without_crypto_provider.
+common_check_mbedtls_missing_symbols () {
+    nm library/libmbedcrypto.a | grep ' [TRrDC] ' | grep -Eo '(mbedtls_|psa_).*' | sort -u > sym_def.txt
+    nm library/libmbedcrypto.a | grep ' U ' | grep -Eo '(mbedtls_|psa_).*' | sort -u > sym_undef.txt
+    comm sym_def.txt sym_undef.txt -13 > linking_errors.txt
+    not grep mbedtls_ linking_errors.txt
+
+    rm sym_def.txt sym_undef.txt linking_errors.txt
+}
+
+component_test_default_psa_crypto_client_without_crypto_provider () {
+    msg "build: default config - PSA_CRYPTO_C + PSA_CRYPTO_CLIENT"
+
+    scripts/config.py unset MBEDTLS_PSA_CRYPTO_C
+    scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C
+    scripts/config.py unset MBEDTLS_PSA_ITS_FILE_C
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    scripts/config.py set MBEDTLS_PSA_CRYPTO_CLIENT
+    scripts/config.py unset MBEDTLS_LMS_C
+
+    make
+
+    msg "check missing symbols: default config - PSA_CRYPTO_C + PSA_CRYPTO_CLIENT"
+    common_check_mbedtls_missing_symbols
+
+    msg "test: default config - PSA_CRYPTO_C + PSA_CRYPTO_CLIENT"
+    make test
+}
+
+component_build_full_psa_crypto_client_without_crypto_provider () {
+    msg "build: full config - PSA_CRYPTO_C"
+
+    # Use full config which includes USE_PSA and CRYPTO_CLIENT.
+    scripts/config.py full
+
+    scripts/config.py unset MBEDTLS_PSA_CRYPTO_C
+    scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C
+    # Dynamic secure element support is a deprecated feature and it is not
+    # available when CRYPTO_C and PSA_CRYPTO_STORAGE_C are disabled.
+    scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
+
+    # Since there is no crypto provider in this build it is not possible to
+    # build all the test executables and progrems due to missing PSA functions
+    # at link time. Therefore we will just build libraries and we'll check
+    # that symbols of interest are there.
+    make lib
+
+    msg "check missing symbols: full config - PSA_CRYPTO_C"
+
+    common_check_mbedtls_missing_symbols
+
+    # Ensure that desired functions are included into the build (extend the
+    # following list as required).
+    grep mbedtls_pk_get_psa_attributes library/libmbedcrypto.a
+    grep mbedtls_pk_import_into_psa library/libmbedcrypto.a
+    grep mbedtls_pk_copy_from_psa library/libmbedcrypto.a
+}
+
+component_test_psa_crypto_rsa_no_genprime () {
+    msg "build: default config minus MBEDTLS_GENPRIME"
+    scripts/config.py unset MBEDTLS_GENPRIME
+    make
+
+    msg "test: default config minus MBEDTLS_GENPRIME"
+    make test
+}
+
+component_test_ref_configs () {
+    msg "test/build: ref-configs (ASan build)" # ~ 6 min 20s
+    # test-ref-configs works by overwriting mbedtls_config.h; this makes cmake
+    # want to re-generate generated files that depend on it, quite correctly.
+    # However this doesn't work as the generation script expects a specific
+    # format for mbedtls_config.h, which the other files don't follow. Also,
+    # cmake can't know this, but re-generation is actually not necessary as
+    # the generated files only depend on the list of available options, not
+    # whether they're on or off. So, disable cmake's (over-sensitive here)
+    # dependency resolution for generated files and just rely on them being
+    # present (thanks to pre_generate_files) by turning GEN_FILES off.
+    CC=$ASAN_CC cmake -D GEN_FILES=Off -D CMAKE_BUILD_TYPE:String=Asan .
+    tests/scripts/test-ref-configs.pl
+}
+
+component_test_no_renegotiation () {
+    msg "build: Default + !MBEDTLS_SSL_RENEGOTIATION (ASan build)" # ~ 6 min
+    scripts/config.py unset MBEDTLS_SSL_RENEGOTIATION
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: !MBEDTLS_SSL_RENEGOTIATION - main suites (inc. selftests) (ASan build)" # ~ 50s
+    make test
+
+    msg "test: !MBEDTLS_SSL_RENEGOTIATION - ssl-opt.sh (ASan build)" # ~ 6 min
+    tests/ssl-opt.sh
+}
+
+component_test_no_pem_no_fs () {
+    msg "build: Default + !MBEDTLS_PEM_PARSE_C + !MBEDTLS_FS_IO (ASan build)"
+    scripts/config.py unset MBEDTLS_PEM_PARSE_C
+    scripts/config.py unset MBEDTLS_FS_IO
+    scripts/config.py unset MBEDTLS_PSA_ITS_FILE_C # requires a filesystem
+    scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C # requires PSA ITS
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: !MBEDTLS_PEM_PARSE_C !MBEDTLS_FS_IO - main suites (inc. selftests) (ASan build)" # ~ 50s
+    make test
+
+    msg "test: !MBEDTLS_PEM_PARSE_C !MBEDTLS_FS_IO - ssl-opt.sh (ASan build)" # ~ 6 min
+    tests/ssl-opt.sh
+}
+
+component_test_rsa_no_crt () {
+    msg "build: Default + RSA_NO_CRT (ASan build)" # ~ 6 min
+    scripts/config.py set MBEDTLS_RSA_NO_CRT
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: RSA_NO_CRT - main suites (inc. selftests) (ASan build)" # ~ 50s
+    make test
+
+    msg "test: RSA_NO_CRT - RSA-related part of ssl-opt.sh (ASan build)" # ~ 5s
+    tests/ssl-opt.sh -f RSA
+
+    msg "test: RSA_NO_CRT - RSA-related part of compat.sh (ASan build)" # ~ 3 min
+    tests/compat.sh -t RSA
+
+    msg "test: RSA_NO_CRT - RSA-related part of context-info.sh (ASan build)" # ~ 15 sec
+    tests/context-info.sh
+}
+
+component_test_no_ctr_drbg_classic () {
+    msg "build: Full minus CTR_DRBG, classic crypto in TLS"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_CTR_DRBG_C
+    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: Full minus CTR_DRBG, classic crypto - main suites"
+    make test
+
+    # In this configuration, the TLS test programs use HMAC_DRBG.
+    # The SSL tests are slow, so run a small subset, just enough to get
+    # confidence that the SSL code copes with HMAC_DRBG.
+    msg "test: Full minus CTR_DRBG, classic crypto - ssl-opt.sh (subset)"
+    tests/ssl-opt.sh -f 'Default\|SSL async private.*delay=\|tickets enabled on server'
+
+    msg "test: Full minus CTR_DRBG, classic crypto - compat.sh (subset)"
+    tests/compat.sh -m tls12 -t 'ECDSA PSK' -V NO -p OpenSSL
+}
+
+component_test_no_ctr_drbg_use_psa () {
+    msg "build: Full minus CTR_DRBG, PSA crypto in TLS"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_CTR_DRBG_C
+    scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
+
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: Full minus CTR_DRBG, USE_PSA_CRYPTO - main suites"
+    make test
+
+    # In this configuration, the TLS test programs use HMAC_DRBG.
+    # The SSL tests are slow, so run a small subset, just enough to get
+    # confidence that the SSL code copes with HMAC_DRBG.
+    msg "test: Full minus CTR_DRBG, USE_PSA_CRYPTO - ssl-opt.sh (subset)"
+    tests/ssl-opt.sh -f 'Default\|SSL async private.*delay=\|tickets enabled on server'
+
+    msg "test: Full minus CTR_DRBG, USE_PSA_CRYPTO - compat.sh (subset)"
+    tests/compat.sh -m tls12 -t 'ECDSA PSK' -V NO -p OpenSSL
+}
+
+component_test_no_hmac_drbg_classic () {
+    msg "build: Full minus HMAC_DRBG, classic crypto in TLS"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_HMAC_DRBG_C
+    scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG
+    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: Full minus HMAC_DRBG, classic crypto - main suites"
+    make test
+
+    # Normally our ECDSA implementation uses deterministic ECDSA. But since
+    # HMAC_DRBG is disabled in this configuration, randomized ECDSA is used
+    # instead.
+    # Test SSL with non-deterministic ECDSA. Only test features that
+    # might be affected by how ECDSA signature is performed.
+    msg "test: Full minus HMAC_DRBG, classic crypto - ssl-opt.sh (subset)"
+    tests/ssl-opt.sh -f 'Default\|SSL async private: sign'
+
+    # To save time, only test one protocol version, since this part of
+    # the protocol is identical in (D)TLS up to 1.2.
+    msg "test: Full minus HMAC_DRBG, classic crypto - compat.sh (ECDSA)"
+    tests/compat.sh -m tls12 -t 'ECDSA'
+}
+
+component_test_no_hmac_drbg_use_psa () {
+    msg "build: Full minus HMAC_DRBG, PSA crypto in TLS"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_HMAC_DRBG_C
+    scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG
+    scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
+
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: Full minus HMAC_DRBG, USE_PSA_CRYPTO - main suites"
+    make test
+
+    # Normally our ECDSA implementation uses deterministic ECDSA. But since
+    # HMAC_DRBG is disabled in this configuration, randomized ECDSA is used
+    # instead.
+    # Test SSL with non-deterministic ECDSA. Only test features that
+    # might be affected by how ECDSA signature is performed.
+    msg "test: Full minus HMAC_DRBG, USE_PSA_CRYPTO - ssl-opt.sh (subset)"
+    tests/ssl-opt.sh -f 'Default\|SSL async private: sign'
+
+    # To save time, only test one protocol version, since this part of
+    # the protocol is identical in (D)TLS up to 1.2.
+    msg "test: Full minus HMAC_DRBG, USE_PSA_CRYPTO - compat.sh (ECDSA)"
+    tests/compat.sh -m tls12 -t 'ECDSA'
+}
+
+component_test_psa_external_rng_no_drbg_classic () {
+    msg "build: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, classic crypto in TLS"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    scripts/config.py set MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG
+    scripts/config.py unset MBEDTLS_ENTROPY_C
+    scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED
+    scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT
+    scripts/config.py unset MBEDTLS_CTR_DRBG_C
+    scripts/config.py unset MBEDTLS_HMAC_DRBG_C
+    scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG
+    # When MBEDTLS_USE_PSA_CRYPTO is disabled and there is no DRBG,
+    # the SSL test programs don't have an RNG and can't work. Explicitly
+    # make them use the PSA RNG with -DMBEDTLS_TEST_USE_PSA_CRYPTO_RNG.
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DMBEDTLS_TEST_USE_PSA_CRYPTO_RNG" LDFLAGS="$ASAN_CFLAGS"
+
+    msg "test: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, classic crypto - main suites"
+    make test
+
+    msg "test: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, classic crypto - ssl-opt.sh (subset)"
+    tests/ssl-opt.sh -f 'Default'
+}
+
+component_test_psa_external_rng_no_drbg_use_psa () {
+    msg "build: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, PSA crypto in TLS"
+    scripts/config.py full
+    scripts/config.py set MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG
+    scripts/config.py unset MBEDTLS_ENTROPY_C
+    scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED
+    scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT
+    scripts/config.py unset MBEDTLS_CTR_DRBG_C
+    scripts/config.py unset MBEDTLS_HMAC_DRBG_C
+    scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
+
+    msg "test: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, PSA crypto - main suites"
+    make test
+
+    msg "test: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, PSA crypto - ssl-opt.sh (subset)"
+    tests/ssl-opt.sh -f 'Default\|opaque'
+}
+
+component_test_psa_external_rng_use_psa_crypto () {
+    msg "build: full + PSA_CRYPTO_EXTERNAL_RNG + USE_PSA_CRYPTO minus CTR_DRBG"
+    scripts/config.py full
+    scripts/config.py set MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG
+    scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py unset MBEDTLS_CTR_DRBG_C
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
+
+    msg "test: full + PSA_CRYPTO_EXTERNAL_RNG + USE_PSA_CRYPTO minus CTR_DRBG"
+    make test
+
+    msg "test: full + PSA_CRYPTO_EXTERNAL_RNG + USE_PSA_CRYPTO minus CTR_DRBG"
+    tests/ssl-opt.sh -f 'Default\|opaque'
+}
+
+component_test_psa_inject_entropy () {
+    msg "build: full + MBEDTLS_PSA_INJECT_ENTROPY"
+    scripts/config.py full
+    scripts/config.py set MBEDTLS_PSA_INJECT_ENTROPY
+    scripts/config.py set MBEDTLS_ENTROPY_NV_SEED
+    scripts/config.py set MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES
+    scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT
+    scripts/config.py unset MBEDTLS_PLATFORM_STD_NV_SEED_READ
+    scripts/config.py unset MBEDTLS_PLATFORM_STD_NV_SEED_WRITE
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS '-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/user-config-for-test.h\"'" LDFLAGS="$ASAN_CFLAGS"
+
+    msg "test: full + MBEDTLS_PSA_INJECT_ENTROPY"
+    make test
+}
+
+component_test_sw_inet_pton () {
+    msg "build: default plus MBEDTLS_TEST_SW_INET_PTON"
+
+    # MBEDTLS_TEST_HOOKS required for x509_crt_parse_cn_inet_pton
+    scripts/config.py set MBEDTLS_TEST_HOOKS
+    make CFLAGS="-DMBEDTLS_TEST_SW_INET_PTON"
+
+    msg "test: default plus MBEDTLS_TEST_SW_INET_PTON"
+    make test
+}
+
+component_full_no_pkparse_pkwrite () {
+    msg "build: full without pkparse and pkwrite"
+
+    scripts/config.py crypto_full
+    scripts/config.py unset MBEDTLS_PK_PARSE_C
+    scripts/config.py unset MBEDTLS_PK_WRITE_C
+
+    make CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
+
+    # Ensure that PK_[PARSE|WRITE]_C were not re-enabled accidentally (additive config).
+    not grep mbedtls_pk_parse_key library/pkparse.o
+    not grep mbedtls_pk_write_key_der library/pkwrite.o
+
+    msg "test: full without pkparse and pkwrite"
+    make test
+}
+
+component_test_crypto_full_md_light_only () {
+    msg "build: crypto_full with only the light subset of MD"
+    scripts/config.py crypto_full
+    scripts/config.py unset MBEDTLS_PSA_CRYPTO_CONFIG
+    # Disable MD
+    scripts/config.py unset MBEDTLS_MD_C
+    # Disable direct dependencies of MD_C
+    scripts/config.py unset MBEDTLS_HKDF_C
+    scripts/config.py unset MBEDTLS_HMAC_DRBG_C
+    scripts/config.py unset MBEDTLS_PKCS7_C
+    # Disable indirect dependencies of MD_C
+    scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # needs HMAC_DRBG
+    # Disable things that would auto-enable MD_C
+    scripts/config.py unset MBEDTLS_PKCS5_C
+
+    # Note: MD-light is auto-enabled in build_info.h by modules that need it,
+    # which we haven't disabled, so no need to explicitly enable it.
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
+
+    # Make sure we don't have the HMAC functions, but the hashing functions
+    not grep mbedtls_md_hmac library/md.o
+    grep mbedtls_md library/md.o
+
+    msg "test: crypto_full with only the light subset of MD"
+    make test
+}
+
+component_test_full_no_cipher_no_psa_crypto () {
+    msg "build: full no CIPHER no PSA_CRYPTO_C"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_CIPHER_C
+    # Don't pull in cipher via PSA mechanisms
+    # (currently ignored anyway because we completely disable PSA)
+    scripts/config.py unset MBEDTLS_PSA_CRYPTO_CONFIG
+    # Disable features that depend on CIPHER_C
+    scripts/config.py unset MBEDTLS_CMAC_C
+    scripts/config.py unset MBEDTLS_NIST_KW_C
+    scripts/config.py unset MBEDTLS_PSA_CRYPTO_C
+    scripts/config.py unset MBEDTLS_PSA_CRYPTO_CLIENT
+    scripts/config.py unset MBEDTLS_SSL_TLS_C
+    scripts/config.py unset MBEDTLS_SSL_TICKET_C
+    # Disable features that depend on PSA_CRYPTO_C
+    scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
+    scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C
+    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py unset MBEDTLS_LMS_C
+    scripts/config.py unset MBEDTLS_LMS_PRIVATE
+
+    msg "test: full no CIPHER no PSA_CRYPTO_C"
+    make test
+}
+
+# This is a common configurator and test function that is used in:
+# - component_test_full_no_cipher_with_psa_crypto
+# - component_test_full_no_cipher_with_psa_crypto_config
+# It accepts 2 input parameters:
+# - $1: boolean value which basically reflects status of MBEDTLS_PSA_CRYPTO_CONFIG
+# - $2: a text string which describes the test component
+common_test_full_no_cipher_with_psa_crypto () {
+    USE_CRYPTO_CONFIG="$1"
+    COMPONENT_DESCRIPTION="$2"
+
+    msg "build: $COMPONENT_DESCRIPTION"
+
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_CIPHER_C
+
+    if [ "$USE_CRYPTO_CONFIG" -eq 1 ]; then
+        # The built-in implementation of the following algs/key-types depends
+        # on CIPHER_C so we disable them.
+        # This does not hold for KEY_TYPE_CHACHA20 and ALG_CHACHA20_POLY1305
+        # so we keep them enabled.
+        scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CCM_STAR_NO_TAG
+        scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CMAC
+        scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CBC_NO_PADDING
+        scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CBC_PKCS7
+        scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CFB
+        scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CTR
+        scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_ECB_NO_PADDING
+        scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_OFB
+        scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_PBKDF2_AES_CMAC_PRF_128
+        scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_STREAM_CIPHER
+        scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_KEY_TYPE_DES
+    else
+        # Don't pull in cipher via PSA mechanisms
+        scripts/config.py unset MBEDTLS_PSA_CRYPTO_CONFIG
+        # Disable cipher modes/keys that make PSA depend on CIPHER_C.
+        # Keep CHACHA20 and CHACHAPOLY enabled since they do not depend on CIPHER_C.
+        scripts/config.py unset-all MBEDTLS_CIPHER_MODE
+    fi
+    # The following modules directly depends on CIPHER_C
+    scripts/config.py unset MBEDTLS_CMAC_C
+    scripts/config.py unset MBEDTLS_NIST_KW_C
+
+    make
+
+    # Ensure that CIPHER_C was not re-enabled
+    not grep mbedtls_cipher_init library/cipher.o
+
+    msg "test: $COMPONENT_DESCRIPTION"
+    make test
+}
+
+component_test_full_no_cipher_with_psa_crypto () {
+    common_test_full_no_cipher_with_psa_crypto 0 "full no CIPHER no CRYPTO_CONFIG"
+}
+
+component_test_full_no_cipher_with_psa_crypto_config () {
+    common_test_full_no_cipher_with_psa_crypto 1 "full no CIPHER"
+}
+
+component_test_full_no_ccm () {
+    msg "build: full no PSA_WANT_ALG_CCM"
+
+    # Full config enables:
+    # - USE_PSA_CRYPTO so that TLS code dispatches cipher/AEAD to PSA
+    # - CRYPTO_CONFIG so that PSA_WANT config symbols are evaluated
+    scripts/config.py full
+
+    # Disable PSA_WANT_ALG_CCM so that CCM is not supported in PSA. CCM_C is still
+    # enabled, but not used from TLS since USE_PSA is set.
+    # This is helpful to ensure that TLS tests below have proper dependencies.
+    #
+    # Note: also PSA_WANT_ALG_CCM_STAR_NO_TAG is enabled, but it does not cause
+    # PSA_WANT_ALG_CCM to be re-enabled.
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CCM
+
+    make
+
+    msg "test: full no PSA_WANT_ALG_CCM"
+    make test
+}
+
+component_test_full_no_ccm_star_no_tag () {
+    msg "build: full no PSA_WANT_ALG_CCM_STAR_NO_TAG"
+
+    # Full config enables CRYPTO_CONFIG so that PSA_WANT config symbols are evaluated
+    scripts/config.py full
+
+    # Disable CCM_STAR_NO_TAG, which is the target of this test, as well as all
+    # other components that enable MBEDTLS_PSA_BUILTIN_CIPHER internal symbol.
+    # This basically disables all unauthenticated ciphers on the PSA side, while
+    # keeping AEADs enabled.
+    #
+    # Note: PSA_WANT_ALG_CCM is enabled, but it does not cause
+    # PSA_WANT_ALG_CCM_STAR_NO_TAG to be re-enabled.
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CCM_STAR_NO_TAG
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_STREAM_CIPHER
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CTR
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CFB
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_OFB
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_ECB_NO_PADDING
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_NO_PADDING
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_PKCS7
+
+    make
+
+    # Ensure MBEDTLS_PSA_BUILTIN_CIPHER was not enabled
+    not grep mbedtls_psa_cipher library/psa_crypto_cipher.o
+
+    msg "test: full no PSA_WANT_ALG_CCM_STAR_NO_TAG"
+    make test
+}
+
+component_test_full_no_bignum () {
+    msg "build: full minus bignum"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_BIGNUM_C
+    # Direct dependencies of bignum
+    scripts/config.py unset MBEDTLS_ECP_C
+    scripts/config.py unset MBEDTLS_RSA_C
+    scripts/config.py unset MBEDTLS_DHM_C
+    # Direct dependencies of ECP
+    scripts/config.py unset MBEDTLS_ECDH_C
+    scripts/config.py unset MBEDTLS_ECDSA_C
+    scripts/config.py unset MBEDTLS_ECJPAKE_C
+    scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
+    # Disable what auto-enables ECP_LIGHT
+    scripts/config.py unset MBEDTLS_PK_PARSE_EC_EXTENDED
+    scripts/config.py unset MBEDTLS_PK_PARSE_EC_COMPRESSED
+    # Indirect dependencies of ECP
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
+    # Direct dependencies of DHM
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
+    # Direct dependencies of RSA
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
+    scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
+    # PK and its dependencies
+    scripts/config.py unset MBEDTLS_PK_C
+    scripts/config.py unset MBEDTLS_PK_PARSE_C
+    scripts/config.py unset MBEDTLS_PK_WRITE_C
+    scripts/config.py unset MBEDTLS_X509_USE_C
+    scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
+    scripts/config.py unset MBEDTLS_X509_CRL_PARSE_C
+    scripts/config.py unset MBEDTLS_X509_CSR_PARSE_C
+    scripts/config.py unset MBEDTLS_X509_CREATE_C
+    scripts/config.py unset MBEDTLS_X509_CRT_WRITE_C
+    scripts/config.py unset MBEDTLS_X509_CSR_WRITE_C
+    scripts/config.py unset MBEDTLS_PKCS7_C
+    scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
+    scripts/config.py unset MBEDTLS_SSL_ASYNC_PRIVATE
+    scripts/config.py unset MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
+
+    make
+
+    msg "test: full minus bignum"
+    make test
+}
+
+component_test_tls1_2_default_stream_cipher_only () {
+    msg "build: default with only stream cipher"
+
+    # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C
+    scripts/config.py unset MBEDTLS_GCM_C
+    scripts/config.py unset MBEDTLS_CCM_C
+    scripts/config.py unset MBEDTLS_CHACHAPOLY_C
+    #Disable TLS 1.3 (as no AEAD)
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    # Disable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
+    scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
+    # Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
+    scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC
+    # Enable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
+    scripts/config.py set MBEDTLS_CIPHER_NULL_CIPHER
+    # Modules that depend on AEAD
+    scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
+    scripts/config.py unset MBEDTLS_SSL_TICKET_C
+
+    make
+
+    msg "test: default with only stream cipher"
+    make test
+
+    # Not running ssl-opt.sh because most tests require a non-NULL ciphersuite.
+}
+
+component_test_tls1_2_default_stream_cipher_only_use_psa () {
+    msg "build: default with only stream cipher use psa"
+
+    scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
+    # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C)
+    scripts/config.py unset MBEDTLS_GCM_C
+    scripts/config.py unset MBEDTLS_CCM_C
+    scripts/config.py unset MBEDTLS_CHACHAPOLY_C
+    #Disable TLS 1.3 (as no AEAD)
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    # Disable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
+    scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
+    # Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
+    scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC
+    # Enable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
+    scripts/config.py set MBEDTLS_CIPHER_NULL_CIPHER
+    # Modules that depend on AEAD
+    scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
+    scripts/config.py unset MBEDTLS_SSL_TICKET_C
+
+    make
+
+    msg "test: default with only stream cipher use psa"
+    make test
+
+    # Not running ssl-opt.sh because most tests require a non-NULL ciphersuite.
+}
+
+component_test_tls1_2_default_cbc_legacy_cipher_only () {
+    msg "build: default with only CBC-legacy cipher"
+
+    # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C)
+    scripts/config.py unset MBEDTLS_GCM_C
+    scripts/config.py unset MBEDTLS_CCM_C
+    scripts/config.py unset MBEDTLS_CHACHAPOLY_C
+    #Disable TLS 1.3 (as no AEAD)
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    # Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
+    scripts/config.py set MBEDTLS_CIPHER_MODE_CBC
+    # Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
+    scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC
+    # Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
+    scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
+    # Modules that depend on AEAD
+    scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
+    scripts/config.py unset MBEDTLS_SSL_TICKET_C
+
+    make
+
+    msg "test: default with only CBC-legacy cipher"
+    make test
+
+    msg "test: default with only CBC-legacy cipher - ssl-opt.sh (subset)"
+    tests/ssl-opt.sh -f "TLS 1.2"
+}
+
+component_test_tls1_2_deafult_cbc_legacy_cipher_only_use_psa () {
+    msg "build: default with only CBC-legacy cipher use psa"
+
+    scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
+    # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C)
+    scripts/config.py unset MBEDTLS_GCM_C
+    scripts/config.py unset MBEDTLS_CCM_C
+    scripts/config.py unset MBEDTLS_CHACHAPOLY_C
+    #Disable TLS 1.3 (as no AEAD)
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    # Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
+    scripts/config.py set MBEDTLS_CIPHER_MODE_CBC
+    # Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
+    scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC
+    # Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
+    scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
+    # Modules that depend on AEAD
+    scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
+    scripts/config.py unset MBEDTLS_SSL_TICKET_C
+
+    make
+
+    msg "test: default with only CBC-legacy cipher use psa"
+    make test
+
+    msg "test: default with only CBC-legacy cipher use psa - ssl-opt.sh (subset)"
+    tests/ssl-opt.sh -f "TLS 1.2"
+}
+
+component_test_tls1_2_default_cbc_legacy_cbc_etm_cipher_only () {
+    msg "build: default with only CBC-legacy and CBC-EtM ciphers"
+
+    # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C)
+    scripts/config.py unset MBEDTLS_GCM_C
+    scripts/config.py unset MBEDTLS_CCM_C
+    scripts/config.py unset MBEDTLS_CHACHAPOLY_C
+    #Disable TLS 1.3 (as no AEAD)
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    # Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
+    scripts/config.py set MBEDTLS_CIPHER_MODE_CBC
+    # Enable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
+    scripts/config.py set MBEDTLS_SSL_ENCRYPT_THEN_MAC
+    # Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
+    scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
+    # Modules that depend on AEAD
+    scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
+    scripts/config.py unset MBEDTLS_SSL_TICKET_C
+
+    make
+
+    msg "test: default with only CBC-legacy and CBC-EtM ciphers"
+    make test
+
+    msg "test: default with only CBC-legacy and CBC-EtM ciphers - ssl-opt.sh (subset)"
+    tests/ssl-opt.sh -f "TLS 1.2"
+}
+
+component_test_tls1_2_default_cbc_legacy_cbc_etm_cipher_only_use_psa () {
+    msg "build: default with only CBC-legacy and CBC-EtM ciphers use psa"
+
+    scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
+    # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C)
+    scripts/config.py unset MBEDTLS_GCM_C
+    scripts/config.py unset MBEDTLS_CCM_C
+    scripts/config.py unset MBEDTLS_CHACHAPOLY_C
+    #Disable TLS 1.3 (as no AEAD)
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    # Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES))
+    scripts/config.py set MBEDTLS_CIPHER_MODE_CBC
+    # Enable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC)
+    scripts/config.py set MBEDTLS_SSL_ENCRYPT_THEN_MAC
+    # Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER))
+    scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
+    # Modules that depend on AEAD
+    scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION
+    scripts/config.py unset MBEDTLS_SSL_TICKET_C
+
+    make
+
+    msg "test: default with only CBC-legacy and CBC-EtM ciphers use psa"
+    make test
+
+    msg "test: default with only CBC-legacy and CBC-EtM ciphers use psa - ssl-opt.sh (subset)"
+    tests/ssl-opt.sh -f "TLS 1.2"
+}
+
+# We're not aware of any other (open source) implementation of EC J-PAKE in TLS
+# that we could use for interop testing. However, we now have sort of two
+# implementations ourselves: one using PSA, the other not. At least test that
+# these two interoperate with each other.
+component_test_tls1_2_ecjpake_compatibility () {
+    msg "build: TLS1.2 server+client w/ EC-JPAKE w/o USE_PSA"
+    scripts/config.py set MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
+    # Explicitly make lib first to avoid a race condition:
+    # https://github.com/Mbed-TLS/mbedtls/issues/8229
+    make lib
+    make -C programs ssl/ssl_server2 ssl/ssl_client2
+    cp programs/ssl/ssl_server2 s2_no_use_psa
+    cp programs/ssl/ssl_client2 c2_no_use_psa
+
+    msg "build: TLS1.2 server+client w/ EC-JPAKE w/ USE_PSA"
+    scripts/config.py set MBEDTLS_USE_PSA_CRYPTO
+    make clean
+    make lib
+    make -C programs ssl/ssl_server2 ssl/ssl_client2
+    make -C programs test/udp_proxy test/query_compile_time_config
+
+    msg "test: server w/o USE_PSA - client w/ USE_PSA, text password"
+    P_SRV=../s2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: working, TLS"
+    msg "test: server w/o USE_PSA - client w/ USE_PSA, opaque password"
+    P_SRV=../s2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: opaque password client only, working, TLS"
+    msg "test: client w/o USE_PSA - server w/ USE_PSA, text password"
+    P_CLI=../c2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: working, TLS"
+    msg "test: client w/o USE_PSA - server w/ USE_PSA, opaque password"
+    P_CLI=../c2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: opaque password server only, working, TLS"
+
+    rm s2_no_use_psa c2_no_use_psa
+}
+
+component_test_everest () {
+    msg "build: Everest ECDH context (ASan build)" # ~ 6 min
+    scripts/config.py set MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED
+    CC=clang cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: Everest ECDH context - main suites (inc. selftests) (ASan build)" # ~ 50s
+    make test
+
+    msg "test: metatests (clang, ASan)"
+    tests/scripts/run-metatests.sh any asan poison
+
+    msg "test: Everest ECDH context - ECDH-related part of ssl-opt.sh (ASan build)" # ~ 5s
+    tests/ssl-opt.sh -f ECDH
+
+    msg "test: Everest ECDH context - compat.sh with some ECDH ciphersuites (ASan build)" # ~ 3 min
+    # Exclude some symmetric ciphers that are redundant here to gain time.
+    tests/compat.sh -f ECDH -V NO -e 'ARIA\|CAMELLIA\|CHACHA'
+}
+
+component_test_everest_curve25519_only () {
+    msg "build: Everest ECDH context, only Curve25519" # ~ 6 min
+    scripts/config.py set MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED
+    scripts/config.py unset MBEDTLS_ECDSA_C
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
+    scripts/config.py unset MBEDTLS_ECJPAKE_C
+    # Disable all curves
+    scripts/config.py unset-all "MBEDTLS_ECP_DP_[0-9A-Z_a-z]*_ENABLED"
+    scripts/config.py set MBEDTLS_ECP_DP_CURVE25519_ENABLED
+
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
+
+    msg "test: Everest ECDH context, only Curve25519" # ~ 50s
+    make test
+}
+
+component_test_small_ssl_out_content_len () {
+    msg "build: small SSL_OUT_CONTENT_LEN (ASan build)"
+    scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 16384
+    scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 4096
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: small SSL_OUT_CONTENT_LEN - ssl-opt.sh MFL and large packet tests"
+    tests/ssl-opt.sh -f "Max fragment\|Large packet"
+}
+
+component_test_small_ssl_in_content_len () {
+    msg "build: small SSL_IN_CONTENT_LEN (ASan build)"
+    scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 4096
+    scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 16384
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: small SSL_IN_CONTENT_LEN - ssl-opt.sh MFL tests"
+    tests/ssl-opt.sh -f "Max fragment"
+}
+
+component_test_small_ssl_dtls_max_buffering () {
+    msg "build: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #0"
+    scripts/config.py set MBEDTLS_SSL_DTLS_MAX_BUFFERING 1000
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #0 - ssl-opt.sh specific reordering test"
+    tests/ssl-opt.sh -f "DTLS reordering: Buffer out-of-order hs msg before reassembling next, free buffered msg"
+}
+
+component_test_small_mbedtls_ssl_dtls_max_buffering () {
+    msg "build: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #1"
+    scripts/config.py set MBEDTLS_SSL_DTLS_MAX_BUFFERING 190
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #1 - ssl-opt.sh specific reordering test"
+    tests/ssl-opt.sh -f "DTLS reordering: Buffer encrypted Finished message, drop for fragmented NewSessionTicket"
+}
+
+component_test_psa_collect_statuses () {
+  msg "build+test: psa_collect_statuses" # ~30s
+  scripts/config.py full
+  tests/scripts/psa_collect_statuses.py
+  # Check that psa_crypto_init() succeeded at least once
+  grep -q '^0:psa_crypto_init:' tests/statuses.log
+  rm -f tests/statuses.log
+}
+
+component_test_full_cmake_clang () {
+    msg "build: cmake, full config, clang" # ~ 50s
+    scripts/config.py full
+    CC=clang CXX=clang cmake -D CMAKE_BUILD_TYPE:String=Release -D ENABLE_TESTING=On -D TEST_CPP=1 .
+    make
+
+    msg "test: main suites (full config, clang)" # ~ 5s
+    make test
+
+    msg "test: cpp_dummy_build (full config, clang)" # ~ 1s
+    programs/test/cpp_dummy_build
+
+    msg "test: metatests (clang)"
+    tests/scripts/run-metatests.sh any pthread
+
+    msg "program demos (full config, clang)" # ~10s
+    tests/scripts/run_demos.py
+
+    msg "test: psa_constant_names (full config, clang)" # ~ 1s
+    tests/scripts/test_psa_constant_names.py
+
+    msg "test: ssl-opt.sh default, ECJPAKE, SSL async (full config)" # ~ 1s
+    tests/ssl-opt.sh -f 'Default\|ECJPAKE\|SSL async private'
+}
+
+skip_suites_without_constant_flow () {
+    # Skip the test suites that don't have any constant-flow annotations.
+    # This will need to be adjusted if we ever start declaring things as
+    # secret from macros or functions inside tests/include or tests/src.
+    SKIP_TEST_SUITES=$(
+        git -C tests/suites grep -L TEST_CF_ 'test_suite_*.function' |
+            sed 's/test_suite_//; s/\.function$//' |
+            tr '\n' ,)
+    export SKIP_TEST_SUITES
+}
+
+skip_all_except_given_suite () {
+    # Skip all but the given test suite
+    SKIP_TEST_SUITES=$(
+        ls -1 tests/suites/test_suite_*.function |
+        grep -v $1.function |
+         sed 's/tests.suites.test_suite_//; s/\.function$//' |
+        tr '\n' ,)
+    export SKIP_TEST_SUITES
+}
+
+component_test_memsan_constant_flow () {
+    # This tests both (1) accesses to undefined memory, and (2) branches or
+    # memory access depending on secret values. To distinguish between those:
+    # - unset MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN - does the failure persist?
+    # - or alternatively, change the build type to MemSanDbg, which enables
+    # origin tracking and nicer stack traces (which are useful for debugging
+    # anyway), and check if the origin was TEST_CF_SECRET() or something else.
+    msg "build: cmake MSan (clang), full config minus MBEDTLS_USE_PSA_CRYPTO with constant flow testing"
+    scripts/config.py full
+    scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN
+    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py unset MBEDTLS_AESNI_C # memsan doesn't grok asm
+    CC=clang cmake -D CMAKE_BUILD_TYPE:String=MemSan .
+    make
+
+    msg "test: main suites (full minus MBEDTLS_USE_PSA_CRYPTO, Msan + constant flow)"
+    make test
+}
+
+component_test_memsan_constant_flow_psa () {
+    # This tests both (1) accesses to undefined memory, and (2) branches or
+    # memory access depending on secret values. To distinguish between those:
+    # - unset MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN - does the failure persist?
+    # - or alternatively, change the build type to MemSanDbg, which enables
+    # origin tracking and nicer stack traces (which are useful for debugging
+    # anyway), and check if the origin was TEST_CF_SECRET() or something else.
+    msg "build: cmake MSan (clang), full config with constant flow testing"
+    scripts/config.py full
+    scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN
+    scripts/config.py unset MBEDTLS_AESNI_C # memsan doesn't grok asm
+    CC=clang cmake -D CMAKE_BUILD_TYPE:String=MemSan .
+    make
+
+    msg "test: main suites (Msan + constant flow)"
+    make test
+}
+
+component_release_test_valgrind_constant_flow () {
+    # This tests both (1) everything that valgrind's memcheck usually checks
+    # (heap buffer overflows, use of uninitialized memory, use-after-free,
+    # etc.) and (2) branches or memory access depending on secret values,
+    # which will be reported as uninitialized memory. To distinguish between
+    # secret and actually uninitialized:
+    # - unset MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND - does the failure persist?
+    # - or alternatively, build with debug info and manually run the offending
+    # test suite with valgrind --track-origins=yes, then check if the origin
+    # was TEST_CF_SECRET() or something else.
+    msg "build: cmake release GCC, full config minus MBEDTLS_USE_PSA_CRYPTO with constant flow testing"
+    scripts/config.py full
+    scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND
+    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
+    skip_suites_without_constant_flow
+    cmake -D CMAKE_BUILD_TYPE:String=Release .
+    make
+
+    # this only shows a summary of the results (how many of each type)
+    # details are left in Testing/<date>/DynamicAnalysis.xml
+    msg "test: some suites (full minus MBEDTLS_USE_PSA_CRYPTO, valgrind + constant flow)"
+    make memcheck
+
+    # Test asm path in constant time module - by default, it will test the plain C
+    # path under Valgrind or Memsan. Running only the constant_time tests is fast (<1s)
+    msg "test: valgrind asm constant_time"
+    scripts/config.py --force set MBEDTLS_TEST_CONSTANT_FLOW_ASM
+    skip_all_except_given_suite test_suite_constant_time
+    cmake -D CMAKE_BUILD_TYPE:String=Release .
+    make clean
+    make
+    make memcheck
+}
+
+component_release_test_valgrind_constant_flow_psa () {
+    # This tests both (1) everything that valgrind's memcheck usually checks
+    # (heap buffer overflows, use of uninitialized memory, use-after-free,
+    # etc.) and (2) branches or memory access depending on secret values,
+    # which will be reported as uninitialized memory. To distinguish between
+    # secret and actually uninitialized:
+    # - unset MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND - does the failure persist?
+    # - or alternatively, build with debug info and manually run the offending
+    # test suite with valgrind --track-origins=yes, then check if the origin
+    # was TEST_CF_SECRET() or something else.
+    msg "build: cmake release GCC, full config with constant flow testing"
+    scripts/config.py full
+    scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND
+    skip_suites_without_constant_flow
+    cmake -D CMAKE_BUILD_TYPE:String=Release .
+    make
+
+    # this only shows a summary of the results (how many of each type)
+    # details are left in Testing/<date>/DynamicAnalysis.xml
+    msg "test: some suites (valgrind + constant flow)"
+    make memcheck
+}
+
+component_test_tsan () {
+    msg "build: TSan (clang)"
+    scripts/config.py full
+    scripts/config.py set MBEDTLS_THREADING_C
+    scripts/config.py set MBEDTLS_THREADING_PTHREAD
+    # Self-tests do not currently use multiple threads.
+    scripts/config.py unset MBEDTLS_SELF_TEST
+
+    # The deprecated MBEDTLS_PSA_CRYPTO_SE_C interface is not thread safe.
+    scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
+
+    CC=clang cmake -D CMAKE_BUILD_TYPE:String=TSan .
+    make
+
+    msg "test: main suites (TSan)"
+    make test
+}
+
+component_test_default_no_deprecated () {
+    # Test that removing the deprecated features from the default
+    # configuration leaves something consistent.
+    msg "build: make, default + MBEDTLS_DEPRECATED_REMOVED" # ~ 30s
+    scripts/config.py set MBEDTLS_DEPRECATED_REMOVED
+    make CFLAGS='-O -Werror -Wall -Wextra'
+
+    msg "test: make, default + MBEDTLS_DEPRECATED_REMOVED" # ~ 5s
+    make test
+}
+
+component_test_full_no_deprecated () {
+    msg "build: make, full_no_deprecated config" # ~ 30s
+    scripts/config.py full_no_deprecated
+    make CFLAGS='-O -Werror -Wall -Wextra'
+
+    msg "test: make, full_no_deprecated config" # ~ 5s
+    make test
+
+    msg "test: ensure that X509 has no direct dependency on BIGNUM_C"
+    not grep mbedtls_mpi library/libmbedx509.a
+}
+
+component_test_full_no_deprecated_deprecated_warning () {
+    # Test that there is nothing deprecated in "full_no_deprecated".
+    # A deprecated feature would trigger a warning (made fatal) from
+    # MBEDTLS_DEPRECATED_WARNING.
+    msg "build: make, full_no_deprecated config, MBEDTLS_DEPRECATED_WARNING" # ~ 30s
+    scripts/config.py full_no_deprecated
+    scripts/config.py unset MBEDTLS_DEPRECATED_REMOVED
+    scripts/config.py set MBEDTLS_DEPRECATED_WARNING
+    make CFLAGS='-O -Werror -Wall -Wextra'
+
+    msg "test: make, full_no_deprecated config, MBEDTLS_DEPRECATED_WARNING" # ~ 5s
+    make test
+}
+
+component_test_full_deprecated_warning () {
+    # Test that when MBEDTLS_DEPRECATED_WARNING is enabled, the build passes
+    # with only certain whitelisted types of warnings.
+    msg "build: make, full config + MBEDTLS_DEPRECATED_WARNING, expect warnings" # ~ 30s
+    scripts/config.py full
+    scripts/config.py set MBEDTLS_DEPRECATED_WARNING
+    # Expect warnings from '#warning' directives in check_config.h.
+    # Note that gcc is required to allow the use of -Wno-error=cpp, which allows us to
+    # display #warning messages without them being treated as errors.
+    make CC=gcc CFLAGS='-O -Werror -Wall -Wextra -Wno-error=cpp' lib programs
+
+    msg "build: make tests, full config + MBEDTLS_DEPRECATED_WARNING, expect warnings" # ~ 30s
+    # Set MBEDTLS_TEST_DEPRECATED to enable tests for deprecated features.
+    # By default those are disabled when MBEDTLS_DEPRECATED_WARNING is set.
+    # Expect warnings from '#warning' directives in check_config.h and
+    # from the use of deprecated functions in test suites.
+    make CC=gcc CFLAGS='-O -Werror -Wall -Wextra -Wno-error=deprecated-declarations -Wno-error=cpp -DMBEDTLS_TEST_DEPRECATED' tests
+
+    msg "test: full config + MBEDTLS_TEST_DEPRECATED" # ~ 30s
+    make test
+
+    msg "program demos: full config + MBEDTLS_TEST_DEPRECATED" # ~10s
+    tests/scripts/run_demos.py
+}
+
+# Check that the specified libraries exist and are empty.
+are_empty_libraries () {
+  nm "$@" >/dev/null 2>/dev/null
+  ! nm "$@" 2>/dev/null | grep -v ':$' | grep .
+}
+
+component_build_crypto_default () {
+  msg "build: make, crypto only"
+  scripts/config.py crypto
+  make CFLAGS='-O1 -Werror'
+  are_empty_libraries library/libmbedx509.* library/libmbedtls.*
+}
+
+component_build_crypto_full () {
+  msg "build: make, crypto only, full config"
+  scripts/config.py crypto_full
+  make CFLAGS='-O1 -Werror'
+  are_empty_libraries library/libmbedx509.* library/libmbedtls.*
+}
+
+component_test_crypto_for_psa_service () {
+  msg "build: make, config for PSA crypto service"
+  scripts/config.py crypto
+  scripts/config.py set MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
+  # Disable things that are not needed for just cryptography, to
+  # reach a configuration that would be typical for a PSA cryptography
+  # service providing all implemented PSA algorithms.
+  # System stuff
+  scripts/config.py unset MBEDTLS_ERROR_C
+  scripts/config.py unset MBEDTLS_TIMING_C
+  scripts/config.py unset MBEDTLS_VERSION_FEATURES
+  # Crypto stuff with no PSA interface
+  scripts/config.py unset MBEDTLS_BASE64_C
+  # Keep MBEDTLS_CIPHER_C because psa_crypto_cipher, CCM and GCM need it.
+  scripts/config.py unset MBEDTLS_HKDF_C # PSA's HKDF is independent
+  # Keep MBEDTLS_MD_C because deterministic ECDSA needs it for HMAC_DRBG.
+  scripts/config.py unset MBEDTLS_NIST_KW_C
+  scripts/config.py unset MBEDTLS_PEM_PARSE_C
+  scripts/config.py unset MBEDTLS_PEM_WRITE_C
+  scripts/config.py unset MBEDTLS_PKCS12_C
+  scripts/config.py unset MBEDTLS_PKCS5_C
+  # MBEDTLS_PK_PARSE_C and MBEDTLS_PK_WRITE_C are actually currently needed
+  # in PSA code to work with RSA keys. We don't require users to set those:
+  # they will be reenabled in build_info.h.
+  scripts/config.py unset MBEDTLS_PK_C
+  scripts/config.py unset MBEDTLS_PK_PARSE_C
+  scripts/config.py unset MBEDTLS_PK_WRITE_C
+  make CFLAGS='-O1 -Werror' all test
+  are_empty_libraries library/libmbedx509.* library/libmbedtls.*
+}
+
+component_build_crypto_baremetal () {
+  msg "build: make, crypto only, baremetal config"
+  scripts/config.py crypto_baremetal
+  make CFLAGS="-O1 -Werror -I$PWD/tests/include/baremetal-override/"
+  are_empty_libraries library/libmbedx509.* library/libmbedtls.*
+}
+support_build_crypto_baremetal () {
+    support_build_baremetal "$@"
+}
+
+component_build_baremetal () {
+  msg "build: make, baremetal config"
+  scripts/config.py baremetal
+  make CFLAGS="-O1 -Werror -I$PWD/tests/include/baremetal-override/"
+}
+support_build_baremetal () {
+    # Older Glibc versions include time.h from other headers such as stdlib.h,
+    # which makes the no-time.h-in-baremetal check fail. Ubuntu 16.04 has this
+    # problem, Ubuntu 18.04 is ok.
+    ! grep -q -F time.h /usr/include/x86_64-linux-gnu/sys/types.h
+}
+
+# depends.py family of tests
+component_test_depends_py_cipher_id () {
+    msg "test/build: depends.py cipher_id (gcc)"
+    tests/scripts/depends.py cipher_id --unset-use-psa
+}
+
+component_test_depends_py_cipher_chaining () {
+    msg "test/build: depends.py cipher_chaining (gcc)"
+    tests/scripts/depends.py cipher_chaining --unset-use-psa
+}
+
+component_test_depends_py_cipher_padding () {
+    msg "test/build: depends.py cipher_padding (gcc)"
+    tests/scripts/depends.py cipher_padding --unset-use-psa
+}
+
+component_test_depends_py_curves () {
+    msg "test/build: depends.py curves (gcc)"
+    tests/scripts/depends.py curves --unset-use-psa
+}
+
+component_test_depends_py_hashes () {
+    msg "test/build: depends.py hashes (gcc)"
+    tests/scripts/depends.py hashes --unset-use-psa
+}
+
+component_test_depends_py_kex () {
+    msg "test/build: depends.py kex (gcc)"
+    tests/scripts/depends.py kex --unset-use-psa
+}
+
+component_test_depends_py_pkalgs () {
+    msg "test/build: depends.py pkalgs (gcc)"
+    tests/scripts/depends.py pkalgs --unset-use-psa
+}
+
+# PSA equivalents of the depends.py tests
+component_test_depends_py_cipher_id_psa () {
+    msg "test/build: depends.py cipher_id (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
+    tests/scripts/depends.py cipher_id
+}
+
+component_test_depends_py_cipher_chaining_psa () {
+    msg "test/build: depends.py cipher_chaining (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
+    tests/scripts/depends.py cipher_chaining
+}
+
+component_test_depends_py_cipher_padding_psa () {
+    msg "test/build: depends.py cipher_padding (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
+    tests/scripts/depends.py cipher_padding
+}
+
+component_test_depends_py_curves_psa () {
+    msg "test/build: depends.py curves (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
+    tests/scripts/depends.py curves
+}
+
+component_test_depends_py_hashes_psa () {
+    msg "test/build: depends.py hashes (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
+    tests/scripts/depends.py hashes
+}
+
+component_test_depends_py_kex_psa () {
+    msg "test/build: depends.py kex (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
+    tests/scripts/depends.py kex
+}
+
+component_test_depends_py_pkalgs_psa () {
+    msg "test/build: depends.py pkalgs (gcc) with MBEDTLS_USE_PSA_CRYPTO defined"
+    tests/scripts/depends.py pkalgs
+}
+
+component_test_psa_crypto_config_ffdh_2048_only () {
+    msg "build: full config - only DH 2048"
+
+    scripts/config.py full
+
+    # Disable all DH groups other than 2048.
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_DH_RFC7919_3072
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_DH_RFC7919_4096
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_DH_RFC7919_6144
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_DH_RFC7919_8192
+
+    make CFLAGS="$ASAN_CFLAGS -Werror" LDFLAGS="$ASAN_CFLAGS"
+
+    msg "test: full config - only DH 2048"
+    make test
+
+    msg "ssl-opt: full config - only DH 2048"
+    tests/ssl-opt.sh -f "ffdh"
+}
+
+component_build_no_pk_rsa_alt_support () {
+    msg "build: !MBEDTLS_PK_RSA_ALT_SUPPORT" # ~30s
+
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_PK_RSA_ALT_SUPPORT
+    scripts/config.py set MBEDTLS_RSA_C
+    scripts/config.py set MBEDTLS_X509_CRT_WRITE_C
+
+    # Only compile - this is primarily to test for compile issues
+    make CFLAGS='-Werror -Wall -Wextra -I../tests/include/alt-dummy'
+}
+
+component_build_module_alt () {
+    msg "build: MBEDTLS_XXX_ALT" # ~30s
+    scripts/config.py full
+
+    # Disable options that are incompatible with some ALT implementations:
+    # aesni.c and padlock.c reference mbedtls_aes_context fields directly.
+    scripts/config.py unset MBEDTLS_AESNI_C
+    scripts/config.py unset MBEDTLS_PADLOCK_C
+    scripts/config.py unset MBEDTLS_AESCE_C
+    # MBEDTLS_ECP_RESTARTABLE is documented as incompatible.
+    scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
+    # You can only have one threading implementation: alt or pthread, not both.
+    scripts/config.py unset MBEDTLS_THREADING_PTHREAD
+    # The SpecifiedECDomain parsing code accesses mbedtls_ecp_group fields
+    # directly and assumes the implementation works with partial groups.
+    scripts/config.py unset MBEDTLS_PK_PARSE_EC_EXTENDED
+    # MBEDTLS_SHA256_*ALT can't be used with MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_*
+    scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
+    scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY
+    # MBEDTLS_SHA512_*ALT can't be used with MBEDTLS_SHA512_USE_A64_CRYPTO_*
+    scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT
+    scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_ONLY
+
+    # Enable all MBEDTLS_XXX_ALT for whole modules. Do not enable
+    # MBEDTLS_XXX_YYY_ALT which are for single functions.
+    scripts/config.py set-all 'MBEDTLS_([A-Z0-9]*|NIST_KW)_ALT'
+    scripts/config.py unset MBEDTLS_DHM_ALT #incompatible with MBEDTLS_DEBUG_C
+
+    # We can only compile, not link, since we don't have any implementations
+    # suitable for testing with the dummy alt headers.
+    make CFLAGS='-Werror -Wall -Wextra -I../tests/include/alt-dummy' lib
+}
+
+component_build_dhm_alt () {
+    msg "build: MBEDTLS_DHM_ALT" # ~30s
+    scripts/config.py full
+    scripts/config.py set MBEDTLS_DHM_ALT
+    # debug.c currently references mbedtls_dhm_context fields directly.
+    scripts/config.py unset MBEDTLS_DEBUG_C
+    # We can only compile, not link, since we don't have any implementations
+    # suitable for testing with the dummy alt headers.
+    make CFLAGS='-Werror -Wall -Wextra -I../tests/include/alt-dummy' lib
+}
+
+component_test_no_psa_crypto_full_cmake_asan () {
+    # full minus MBEDTLS_PSA_CRYPTO_C: run the same set of tests as basic-build-test.sh
+    msg "build: cmake, full config minus PSA crypto, ASan"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_PSA_CRYPTO_C
+    scripts/config.py unset MBEDTLS_PSA_CRYPTO_CLIENT
+    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    scripts/config.py unset MBEDTLS_PSA_ITS_FILE_C
+    scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
+    scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C
+    scripts/config.py unset MBEDTLS_LMS_C
+    scripts/config.py unset MBEDTLS_LMS_PRIVATE
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: main suites (full minus PSA crypto)"
+    make test
+
+    # Note: ssl-opt.sh has some test cases that depend on
+    # MBEDTLS_ECP_RESTARTABLE && !MBEDTLS_USE_PSA_CRYPTO
+    # This is the only component where those tests are not skipped.
+    msg "test: ssl-opt.sh (full minus PSA crypto)"
+    tests/ssl-opt.sh
+
+    # Note: the next two invocations cover all compat.sh test cases.
+    # We should use the same here and in basic-build-test.sh.
+    msg "test: compat.sh: default version (full minus PSA crypto)"
+    tests/compat.sh -e 'ARIA\|CHACHA'
+
+    msg "test: compat.sh: next: ARIA, Chacha (full minus PSA crypto)"
+    env OPENSSL="$OPENSSL_NEXT" tests/compat.sh -e '^$' -f 'ARIA\|CHACHA'
+}
+
+component_test_psa_crypto_config_accel_ecdsa () {
+    msg "build: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDSA"
+
+    # Algorithms and key types to accelerate
+    loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \
+                    $(helper_get_psa_key_type_list "ECC") \
+                    $(helper_get_psa_curve_list)"
+
+    # Configure
+    # ---------
+
+    # Start from default config (no USE_PSA) + TLS 1.3
+    helper_libtestdriver1_adjust_config "default"
+
+    # Disable the module that's accelerated
+    scripts/config.py unset MBEDTLS_ECDSA_C
+
+    # Disable things that depend on it
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
+
+    # Build
+    # -----
+
+    # These hashes are needed for some ECDSA signature tests.
+    loc_extra_list="ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
+                    ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
+
+    helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
+
+    helper_libtestdriver1_make_main "$loc_accel_list"
+
+    # Make sure this was not re-enabled by accident (additive config)
+    not grep mbedtls_ecdsa_ library/ecdsa.o
+
+    # Run the tests
+    # -------------
+
+    msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDSA"
+    make test
+}
+
+component_test_psa_crypto_config_accel_ecdh () {
+    msg "build: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDH"
+
+    # Algorithms and key types to accelerate
+    loc_accel_list="ALG_ECDH \
+                    $(helper_get_psa_key_type_list "ECC") \
+                    $(helper_get_psa_curve_list)"
+
+    # Configure
+    # ---------
+
+    # Start from default config (no USE_PSA)
+    helper_libtestdriver1_adjust_config "default"
+
+    # Disable the module that's accelerated
+    scripts/config.py unset MBEDTLS_ECDH_C
+
+    # Disable things that depend on it
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
+
+    # Build
+    # -----
+
+    helper_libtestdriver1_make_drivers "$loc_accel_list"
+
+    helper_libtestdriver1_make_main "$loc_accel_list"
+
+    # Make sure this was not re-enabled by accident (additive config)
+    not grep mbedtls_ecdh_ library/ecdh.o
+
+    # Run the tests
+    # -------------
+
+    msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDH"
+    make test
+}
+
+component_test_psa_crypto_config_accel_ffdh () {
+    msg "build: full with accelerated FFDH"
+
+    # Algorithms and key types to accelerate
+    loc_accel_list="ALG_FFDH \
+                    $(helper_get_psa_key_type_list "DH") \
+                    $(helper_get_psa_dh_group_list)"
+
+    # Configure
+    # ---------
+
+    # start with full (USE_PSA and TLS 1.3)
+    helper_libtestdriver1_adjust_config "full"
+
+    # Disable the module that's accelerated
+    scripts/config.py unset MBEDTLS_DHM_C
+
+    # Disable things that depend on it
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
+
+    # Build
+    # -----
+
+    helper_libtestdriver1_make_drivers "$loc_accel_list"
+
+    helper_libtestdriver1_make_main "$loc_accel_list"
+
+    # Make sure this was not re-enabled by accident (additive config)
+    not grep mbedtls_dhm_ library/dhm.o
+
+    # Run the tests
+    # -------------
+
+    msg "test: full with accelerated FFDH"
+    make test
+
+    msg "ssl-opt: full with accelerated FFDH alg"
+    tests/ssl-opt.sh -f "ffdh"
+}
+
+component_test_psa_crypto_config_reference_ffdh () {
+    msg "build: full with non-accelerated FFDH"
+
+    # Start with full (USE_PSA and TLS 1.3)
+    helper_libtestdriver1_adjust_config "full"
+
+    # Disable things that are not supported
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
+    make
+
+    msg "test suites: full with non-accelerated FFDH alg"
+    make test
+
+    msg "ssl-opt: full with non-accelerated FFDH alg"
+    tests/ssl-opt.sh -f "ffdh"
+}
+
+component_test_psa_crypto_config_accel_pake () {
+    msg "build: full with accelerated PAKE"
+
+    loc_accel_list="ALG_JPAKE \
+                    $(helper_get_psa_key_type_list "ECC") \
+                    $(helper_get_psa_curve_list)"
+
+    # Configure
+    # ---------
+
+    helper_libtestdriver1_adjust_config "full"
+
+    # Make built-in fallback not available
+    scripts/config.py unset MBEDTLS_ECJPAKE_C
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
+
+    # Build
+    # -----
+
+    helper_libtestdriver1_make_drivers "$loc_accel_list"
+
+    helper_libtestdriver1_make_main "$loc_accel_list"
+
+    # Make sure this was not re-enabled by accident (additive config)
+    not grep mbedtls_ecjpake_init library/ecjpake.o
+
+    # Run the tests
+    # -------------
+
+    msg "test: full with accelerated PAKE"
+    make test
+}
+
+component_test_psa_crypto_config_accel_ecc_some_key_types () {
+    msg "build: full with accelerated EC algs and some key types"
+
+    # Algorithms and key types to accelerate
+    # For key types, use an explicitly list to omit GENERATE (and DERIVE)
+    loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \
+                    ALG_ECDH \
+                    ALG_JPAKE \
+                    KEY_TYPE_ECC_PUBLIC_KEY \
+                    KEY_TYPE_ECC_KEY_PAIR_BASIC \
+                    KEY_TYPE_ECC_KEY_PAIR_IMPORT \
+                    KEY_TYPE_ECC_KEY_PAIR_EXPORT \
+                    $(helper_get_psa_curve_list)"
+
+    # Configure
+    # ---------
+
+    # start with config full for maximum coverage (also enables USE_PSA)
+    helper_libtestdriver1_adjust_config "full"
+
+    # Disable modules that are accelerated - some will be re-enabled
+    scripts/config.py unset MBEDTLS_ECDSA_C
+    scripts/config.py unset MBEDTLS_ECDH_C
+    scripts/config.py unset MBEDTLS_ECJPAKE_C
+    scripts/config.py unset MBEDTLS_ECP_C
+
+    # Disable all curves - those that aren't accelerated should be re-enabled
+    helper_disable_builtin_curves
+
+    # Restartable feature is not yet supported by PSA. Once it will in
+    # the future, the following line could be removed (see issues
+    # 6061, 6332 and following ones)
+    scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
+
+    # this is not supported by the driver API yet
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE
+
+    # Build
+    # -----
+
+    # These hashes are needed for some ECDSA signature tests.
+    loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
+                    ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
+    helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
+
+    helper_libtestdriver1_make_main "$loc_accel_list"
+
+    # ECP should be re-enabled but not the others
+    not grep mbedtls_ecdh_ library/ecdh.o
+    not grep mbedtls_ecdsa library/ecdsa.o
+    not grep mbedtls_ecjpake  library/ecjpake.o
+    grep mbedtls_ecp library/ecp.o
+
+    # Run the tests
+    # -------------
+
+    msg "test suites: full with accelerated EC algs and some key types"
+    make test
+}
+
+# Run tests with only (non-)Weierstrass accelerated
+# Common code used in:
+# - component_test_psa_crypto_config_accel_ecc_weierstrass_curves
+# - component_test_psa_crypto_config_accel_ecc_non_weierstrass_curves
+common_test_psa_crypto_config_accel_ecc_some_curves () {
+    weierstrass=$1
+    if [ $weierstrass -eq 1 ]; then
+        desc="Weierstrass"
+    else
+        desc="non-Weierstrass"
+    fi
+
+    msg "build: crypto_full minus PK with accelerated EC algs and $desc curves"
+
+    # Note: Curves are handled in a special way by the libtestdriver machinery,
+    # so we only want to include them in the accel list when building the main
+    # libraries, hence the use of a separate variable.
+    # Note: the following loop is a modified version of
+    # helper_get_psa_curve_list that only keeps Weierstrass families.
+    loc_weierstrass_list=""
+    loc_non_weierstrass_list=""
+    for item in $(sed -n 's/^#define PSA_WANT_\(ECC_[0-9A-Z_a-z]*\).*/\1/p' <"$CRYPTO_CONFIG_H"); do
+        case $item in
+            ECC_BRAINPOOL*|ECC_SECP*)
+                loc_weierstrass_list="$loc_weierstrass_list $item"
+                ;;
+            *)
+                loc_non_weierstrass_list="$loc_non_weierstrass_list $item"
+                ;;
+        esac
+    done
+    if [ $weierstrass -eq 1 ]; then
+        loc_curve_list=$loc_weierstrass_list
+    else
+        loc_curve_list=$loc_non_weierstrass_list
+    fi
+
+    # Algorithms and key types to accelerate
+    loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \
+                    ALG_ECDH \
+                    ALG_JPAKE \
+                    $(helper_get_psa_key_type_list "ECC") \
+                    $loc_curve_list"
+
+    # Configure
+    # ---------
+
+    # Start with config crypto_full and remove PK_C:
+    # that's what's supported now, see docs/driver-only-builds.md.
+    helper_libtestdriver1_adjust_config "crypto_full"
+    scripts/config.py unset MBEDTLS_PK_C
+    scripts/config.py unset MBEDTLS_PK_PARSE_C
+    scripts/config.py unset MBEDTLS_PK_WRITE_C
+
+    # Disable modules that are accelerated - some will be re-enabled
+    scripts/config.py unset MBEDTLS_ECDSA_C
+    scripts/config.py unset MBEDTLS_ECDH_C
+    scripts/config.py unset MBEDTLS_ECJPAKE_C
+    scripts/config.py unset MBEDTLS_ECP_C
+
+    # Disable all curves - those that aren't accelerated should be re-enabled
+    helper_disable_builtin_curves
+
+    # Restartable feature is not yet supported by PSA. Once it will in
+    # the future, the following line could be removed (see issues
+    # 6061, 6332 and following ones)
+    scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
+
+    # this is not supported by the driver API yet
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE
+
+    # Build
+    # -----
+
+    # These hashes are needed for some ECDSA signature tests.
+    loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
+                    ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
+    helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
+
+    helper_libtestdriver1_make_main "$loc_accel_list"
+
+    # We expect ECDH to be re-enabled for the missing curves
+    grep mbedtls_ecdh_ library/ecdh.o
+    # We expect ECP to be re-enabled, however the parts specific to the
+    # families of curves that are accelerated should be ommited.
+    # - functions with mxz in the name are specific to Montgomery curves
+    # - ecp_muladd is specific to Weierstrass curves
+    ##nm library/ecp.o | tee ecp.syms
+    if [ $weierstrass -eq 1 ]; then
+        not grep mbedtls_ecp_muladd library/ecp.o
+        grep mxz library/ecp.o
+    else
+        grep mbedtls_ecp_muladd library/ecp.o
+        not grep mxz library/ecp.o
+    fi
+    # We expect ECDSA and ECJPAKE to be re-enabled only when
+    # Weierstrass curves are not accelerated
+    if [ $weierstrass -eq 1 ]; then
+        not grep mbedtls_ecdsa library/ecdsa.o
+        not grep mbedtls_ecjpake  library/ecjpake.o
+    else
+        grep mbedtls_ecdsa library/ecdsa.o
+        grep mbedtls_ecjpake  library/ecjpake.o
+    fi
+
+    # Run the tests
+    # -------------
+
+    msg "test suites: crypto_full minus PK with accelerated EC algs and $desc curves"
+    make test
+}
+
+component_test_psa_crypto_config_accel_ecc_weierstrass_curves () {
+    common_test_psa_crypto_config_accel_ecc_some_curves 1
+}
+
+component_test_psa_crypto_config_accel_ecc_non_weierstrass_curves () {
+    common_test_psa_crypto_config_accel_ecc_some_curves 0
+}
+
+# Auxiliary function to build config for all EC based algorithms (EC-JPAKE,
+# ECDH, ECDSA) with and without drivers.
+# The input parameter is a boolean value which indicates:
+# - 0 keep built-in EC algs,
+# - 1 exclude built-in EC algs (driver only).
+#
+# This is used by the two following components to ensure they always use the
+# same config, except for the use of driver or built-in EC algorithms:
+# - component_test_psa_crypto_config_accel_ecc_ecp_light_only;
+# - component_test_psa_crypto_config_reference_ecc_ecp_light_only.
+# This supports comparing their test coverage with analyze_outcomes.py.
+config_psa_crypto_config_ecp_light_only () {
+    driver_only="$1"
+    # start with config full for maximum coverage (also enables USE_PSA)
+    helper_libtestdriver1_adjust_config "full"
+    if [ "$driver_only" -eq 1 ]; then
+        # Disable modules that are accelerated
+        scripts/config.py unset MBEDTLS_ECDSA_C
+        scripts/config.py unset MBEDTLS_ECDH_C
+        scripts/config.py unset MBEDTLS_ECJPAKE_C
+        scripts/config.py unset MBEDTLS_ECP_C
+    fi
+
+    # Restartable feature is not yet supported by PSA. Once it will in
+    # the future, the following line could be removed (see issues
+    # 6061, 6332 and following ones)
+    scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
+}
+
+# Keep in sync with component_test_psa_crypto_config_reference_ecc_ecp_light_only
+component_test_psa_crypto_config_accel_ecc_ecp_light_only () {
+    msg "build: full with accelerated EC algs"
+
+    # Algorithms and key types to accelerate
+    loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \
+                    ALG_ECDH \
+                    ALG_JPAKE \
+                    $(helper_get_psa_key_type_list "ECC") \
+                    $(helper_get_psa_curve_list)"
+
+    # Configure
+    # ---------
+
+    # Use the same config as reference, only without built-in EC algs
+    config_psa_crypto_config_ecp_light_only 1
+
+    # Do not disable builtin curves because that support is required for:
+    # - MBEDTLS_PK_PARSE_EC_EXTENDED
+    # - MBEDTLS_PK_PARSE_EC_COMPRESSED
+
+    # Build
+    # -----
+
+    # These hashes are needed for some ECDSA signature tests.
+    loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
+                    ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
+    helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
+
+    helper_libtestdriver1_make_main "$loc_accel_list"
+
+    # Make sure any built-in EC alg was not re-enabled by accident (additive config)
+    not grep mbedtls_ecdsa_ library/ecdsa.o
+    not grep mbedtls_ecdh_ library/ecdh.o
+    not grep mbedtls_ecjpake_ library/ecjpake.o
+    not grep mbedtls_ecp_mul library/ecp.o
+
+    # Run the tests
+    # -------------
+
+    msg "test suites: full with accelerated EC algs"
+    make test
+
+    msg "ssl-opt: full with accelerated EC algs"
+    tests/ssl-opt.sh
+}
+
+# Keep in sync with component_test_psa_crypto_config_accel_ecc_ecp_light_only
+component_test_psa_crypto_config_reference_ecc_ecp_light_only () {
+    msg "build: MBEDTLS_PSA_CRYPTO_CONFIG with non-accelerated EC algs"
+
+    config_psa_crypto_config_ecp_light_only 0
+
+    make
+
+    msg "test suites: full with non-accelerated EC algs"
+    make test
+
+    msg "ssl-opt: full with non-accelerated EC algs"
+    tests/ssl-opt.sh
+}
+
+# This helper function is used by:
+# - component_test_psa_crypto_config_accel_ecc_no_ecp_at_all()
+# - component_test_psa_crypto_config_reference_ecc_no_ecp_at_all()
+# to ensure that both tests use the same underlying configuration when testing
+# driver's coverage with analyze_outcomes.py.
+#
+# This functions accepts 1 boolean parameter as follows:
+# - 1: building with accelerated EC algorithms (ECDSA, ECDH, ECJPAKE), therefore
+#      excluding their built-in implementation as well as ECP_C & ECP_LIGHT
+# - 0: include built-in implementation of EC algorithms.
+#
+# PK_C and RSA_C are always disabled to ensure there is no remaining dependency
+# on the ECP module.
+config_psa_crypto_no_ecp_at_all () {
+    driver_only="$1"
+    # start with full config for maximum coverage (also enables USE_PSA)
+    helper_libtestdriver1_adjust_config "full"
+
+    if [ "$driver_only" -eq 1 ]; then
+        # Disable modules that are accelerated
+        scripts/config.py unset MBEDTLS_ECDSA_C
+        scripts/config.py unset MBEDTLS_ECDH_C
+        scripts/config.py unset MBEDTLS_ECJPAKE_C
+        # Disable ECP module (entirely)
+        scripts/config.py unset MBEDTLS_ECP_C
+    fi
+
+    # Disable all the features that auto-enable ECP_LIGHT (see build_info.h)
+    scripts/config.py unset MBEDTLS_PK_PARSE_EC_EXTENDED
+    scripts/config.py unset MBEDTLS_PK_PARSE_EC_COMPRESSED
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE
+
+    # Restartable feature is not yet supported by PSA. Once it will in
+    # the future, the following line could be removed (see issues
+    # 6061, 6332 and following ones)
+    scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
+}
+
+# Build and test a configuration where driver accelerates all EC algs while
+# all support and dependencies from ECP and ECP_LIGHT are removed on the library
+# side.
+#
+# Keep in sync with component_test_psa_crypto_config_reference_ecc_no_ecp_at_all()
+component_test_psa_crypto_config_accel_ecc_no_ecp_at_all () {
+    msg "build: full + accelerated EC algs - ECP"
+
+    # Algorithms and key types to accelerate
+    loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \
+                    ALG_ECDH \
+                    ALG_JPAKE \
+                    $(helper_get_psa_key_type_list "ECC") \
+                    $(helper_get_psa_curve_list)"
+
+    # Configure
+    # ---------
+
+    # Set common configurations between library's and driver's builds
+    config_psa_crypto_no_ecp_at_all 1
+    # Disable all the builtin curves. All the required algs are accelerated.
+    helper_disable_builtin_curves
+
+    # Build
+    # -----
+
+    # Things we wanted supported in libtestdriver1, but not accelerated in the main library:
+    # SHA-1 and all SHA-2/3 variants, as they are used by ECDSA deterministic.
+    loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
+                    ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
+
+    helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
+
+    helper_libtestdriver1_make_main "$loc_accel_list"
+
+    # Make sure any built-in EC alg was not re-enabled by accident (additive config)
+    not grep mbedtls_ecdsa_ library/ecdsa.o
+    not grep mbedtls_ecdh_ library/ecdh.o
+    not grep mbedtls_ecjpake_ library/ecjpake.o
+    # Also ensure that ECP module was not re-enabled
+    not grep mbedtls_ecp_ library/ecp.o
+
+    # Run the tests
+    # -------------
+
+    msg "test: full + accelerated EC algs - ECP"
+    make test
+
+    msg "ssl-opt: full + accelerated EC algs - ECP"
+    tests/ssl-opt.sh
+}
+
+# Reference function used for driver's coverage analysis in analyze_outcomes.py
+# in conjunction with component_test_psa_crypto_config_accel_ecc_no_ecp_at_all().
+# Keep in sync with its accelerated counterpart.
+component_test_psa_crypto_config_reference_ecc_no_ecp_at_all () {
+    msg "build: full + non accelerated EC algs"
+
+    config_psa_crypto_no_ecp_at_all 0
+
+    make
+
+    msg "test: full + non accelerated EC algs"
+    make test
+
+    msg "ssl-opt: full + non accelerated EC algs"
+    tests/ssl-opt.sh
+}
+
+# This is a common configuration helper used directly from:
+# - common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum
+# - common_test_psa_crypto_config_reference_ecc_ffdh_no_bignum
+# and indirectly from:
+# - component_test_psa_crypto_config_accel_ecc_no_bignum
+#       - accelerate all EC algs, disable RSA and FFDH
+# - component_test_psa_crypto_config_reference_ecc_no_bignum
+#       - this is the reference component of the above
+#       - it still disables RSA and FFDH, but it uses builtin EC algs
+# - component_test_psa_crypto_config_accel_ecc_ffdh_no_bignum
+#       - accelerate all EC and FFDH algs, disable only RSA
+# - component_test_psa_crypto_config_reference_ecc_ffdh_no_bignum
+#       - this is the reference component of the above
+#       - it still disables RSA, but it uses builtin EC and FFDH algs
+#
+# This function accepts 2 parameters:
+# $1: a boolean value which states if we are testing an accelerated scenario
+#     or not.
+# $2: a string value which states which components are tested. Allowed values
+#     are "ECC" or "ECC_DH".
+config_psa_crypto_config_accel_ecc_ffdh_no_bignum () {
+    driver_only="$1"
+    test_target="$2"
+    # start with full config for maximum coverage (also enables USE_PSA)
+    helper_libtestdriver1_adjust_config "full"
+
+    if [ "$driver_only" -eq 1 ]; then
+        # Disable modules that are accelerated
+        scripts/config.py unset MBEDTLS_ECDSA_C
+        scripts/config.py unset MBEDTLS_ECDH_C
+        scripts/config.py unset MBEDTLS_ECJPAKE_C
+        # Disable ECP module (entirely)
+        scripts/config.py unset MBEDTLS_ECP_C
+        # Also disable bignum
+        scripts/config.py unset MBEDTLS_BIGNUM_C
+    fi
+
+    # Disable all the features that auto-enable ECP_LIGHT (see build_info.h)
+    scripts/config.py unset MBEDTLS_PK_PARSE_EC_EXTENDED
+    scripts/config.py unset MBEDTLS_PK_PARSE_EC_COMPRESSED
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE
+
+    # RSA support is intentionally disabled on this test because RSA_C depends
+    # on BIGNUM_C.
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset-all "PSA_WANT_KEY_TYPE_RSA_[0-9A-Z_a-z]*"
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset-all "PSA_WANT_ALG_RSA_[0-9A-Z_a-z]*"
+    scripts/config.py unset MBEDTLS_RSA_C
+    scripts/config.py unset MBEDTLS_PKCS1_V15
+    scripts/config.py unset MBEDTLS_PKCS1_V21
+    scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
+    # Also disable key exchanges that depend on RSA
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
+
+    if [ "$test_target" = "ECC" ]; then
+        # When testing ECC only, we disable FFDH support, both from builtin and
+        # PSA sides, and also disable the key exchanges that depend on DHM.
+        scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_FFDH
+        scripts/config.py -f "$CRYPTO_CONFIG_H" unset-all "PSA_WANT_KEY_TYPE_DH_[0-9A-Z_a-z]*"
+        scripts/config.py -f "$CRYPTO_CONFIG_H" unset-all "PSA_WANT_DH_RFC7919_[0-9]*"
+        scripts/config.py unset MBEDTLS_DHM_C
+        scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
+        scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
+    else
+        # When testing ECC and DH instead, we disable DHM and depending key
+        # exchanges only in the accelerated build
+        if [ "$driver_only" -eq 1 ]; then
+            scripts/config.py unset MBEDTLS_DHM_C
+            scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
+            scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
+        fi
+    fi
+
+    # Restartable feature is not yet supported by PSA. Once it will in
+    # the future, the following line could be removed (see issues
+    # 6061, 6332 and following ones)
+    scripts/config.py unset MBEDTLS_ECP_RESTARTABLE
+}
+
+# Common helper used by:
+# - component_test_psa_crypto_config_accel_ecc_no_bignum
+# - component_test_psa_crypto_config_accel_ecc_ffdh_no_bignum
+#
+# The goal is to build and test accelerating either:
+# - ECC only or
+# - both ECC and FFDH
+#
+# It is meant to be used in conjunction with
+# common_test_psa_crypto_config_reference_ecc_ffdh_no_bignum() for drivers
+# coverage analysis in the "analyze_outcomes.py" script.
+common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum () {
+    test_target="$1"
+
+    # This is an internal helper to simplify text message handling
+    if [ "$test_target" = "ECC_DH" ]; then
+        accel_text="ECC/FFDH"
+        removed_text="ECP - DH"
+    else
+        accel_text="ECC"
+        removed_text="ECP"
+    fi
+
+    msg "build: full + accelerated $accel_text algs + USE_PSA - $removed_text - BIGNUM"
+
+    # By default we accelerate all EC keys/algs
+    loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \
+                    ALG_ECDH \
+                    ALG_JPAKE \
+                    $(helper_get_psa_key_type_list "ECC") \
+                    $(helper_get_psa_curve_list)"
+    # Optionally we can also add DH to the list of accelerated items
+    if [ "$test_target" = "ECC_DH" ]; then
+        loc_accel_list="$loc_accel_list \
+                        ALG_FFDH \
+                        $(helper_get_psa_key_type_list "DH") \
+                        $(helper_get_psa_dh_group_list)"
+    fi
+
+    # Configure
+    # ---------
+
+    # Set common configurations between library's and driver's builds
+    config_psa_crypto_config_accel_ecc_ffdh_no_bignum 1 "$test_target"
+    # Disable all the builtin curves. All the required algs are accelerated.
+    helper_disable_builtin_curves
+
+    # Build
+    # -----
+
+    # Things we wanted supported in libtestdriver1, but not accelerated in the main library:
+    # SHA-1 and all SHA-2/3 variants, as they are used by ECDSA deterministic.
+    loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
+                    ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
+
+    helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
+
+    helper_libtestdriver1_make_main "$loc_accel_list"
+
+    # Make sure any built-in EC alg was not re-enabled by accident (additive config)
+    not grep mbedtls_ecdsa_ library/ecdsa.o
+    not grep mbedtls_ecdh_ library/ecdh.o
+    not grep mbedtls_ecjpake_ library/ecjpake.o
+    # Also ensure that ECP, RSA, [DHM] or BIGNUM modules were not re-enabled
+    not grep mbedtls_ecp_ library/ecp.o
+    not grep mbedtls_rsa_ library/rsa.o
+    not grep mbedtls_mpi_ library/bignum.o
+    not grep mbedtls_dhm_ library/dhm.o
+
+    # Run the tests
+    # -------------
+
+    msg "test suites: full + accelerated $accel_text algs + USE_PSA - $removed_text - DHM - BIGNUM"
+
+    make test
+
+    msg "ssl-opt: full + accelerated $accel_text algs + USE_PSA - $removed_text - BIGNUM"
+    tests/ssl-opt.sh
+}
+
+# Common helper used by:
+# - component_test_psa_crypto_config_reference_ecc_no_bignum
+# - component_test_psa_crypto_config_reference_ecc_ffdh_no_bignum
+#
+# The goal is to build and test a reference scenario (i.e. with builtin
+# components) compared to the ones used in
+# common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum() above.
+#
+# It is meant to be used in conjunction with
+# common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum() for drivers'
+# coverage analysis in "analyze_outcomes.py" script.
+common_test_psa_crypto_config_reference_ecc_ffdh_no_bignum () {
+    test_target="$1"
+
+    # This is an internal helper to simplify text message handling
+    if [ "$test_target" = "ECC_DH" ]; then
+        accel_text="ECC/FFDH"
+    else
+        accel_text="ECC"
+    fi
+
+    msg "build: full + non accelerated $accel_text algs + USE_PSA"
+
+    config_psa_crypto_config_accel_ecc_ffdh_no_bignum 0 "$test_target"
+
+    make
+
+    msg "test suites: full + non accelerated EC algs + USE_PSA"
+    make test
+
+    msg "ssl-opt: full + non accelerated $accel_text algs + USE_PSA"
+    tests/ssl-opt.sh
+}
+
+component_test_psa_crypto_config_accel_ecc_no_bignum () {
+    common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum "ECC"
+}
+
+component_test_psa_crypto_config_reference_ecc_no_bignum () {
+    common_test_psa_crypto_config_reference_ecc_ffdh_no_bignum "ECC"
+}
+
+component_test_psa_crypto_config_accel_ecc_ffdh_no_bignum () {
+    common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum "ECC_DH"
+}
+
+component_test_psa_crypto_config_reference_ecc_ffdh_no_bignum () {
+    common_test_psa_crypto_config_reference_ecc_ffdh_no_bignum "ECC_DH"
+}
+
+# Helper for setting common configurations between:
+# - component_test_tfm_config_p256m_driver_accel_ec()
+# - component_test_tfm_config()
+common_tfm_config () {
+    # Enable TF-M config
+    cp configs/config-tfm.h "$CONFIG_H"
+    echo "#undef MBEDTLS_PSA_CRYPTO_CONFIG_FILE" >> "$CONFIG_H"
+    cp configs/ext/crypto_config_profile_medium.h "$CRYPTO_CONFIG_H"
+
+    # Other config adjustment to make the tests pass.
+    # This should probably be adopted upstream.
+    #
+    # - USE_PSA_CRYPTO for PK_HAVE_ECC_KEYS
+    echo "#define MBEDTLS_USE_PSA_CRYPTO" >> "$CONFIG_H"
+
+    # Config adjustment for better test coverage in our environment.
+    # This is not needed just to build and pass tests.
+    #
+    # Enable filesystem I/O for the benefit of PK parse/write tests.
+    echo "#define MBEDTLS_FS_IO" >> "$CONFIG_H"
+}
+
+# Keep this in sync with component_test_tfm_config() as they are both meant
+# to be used in analyze_outcomes.py for driver's coverage analysis.
+component_test_tfm_config_p256m_driver_accel_ec () {
+    msg "build: TF-M config + p256m driver + accel ECDH(E)/ECDSA"
+
+    common_tfm_config
+
+    # Build crypto library
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -I../tests/include/spe" LDFLAGS="$ASAN_CFLAGS"
+
+    # Make sure any built-in EC alg was not re-enabled by accident (additive config)
+    not grep mbedtls_ecdsa_ library/ecdsa.o
+    not grep mbedtls_ecdh_ library/ecdh.o
+    not grep mbedtls_ecjpake_ library/ecjpake.o
+    # Also ensure that ECP, RSA, DHM or BIGNUM modules were not re-enabled
+    not grep mbedtls_ecp_ library/ecp.o
+    not grep mbedtls_rsa_ library/rsa.o
+    not grep mbedtls_dhm_ library/dhm.o
+    not grep mbedtls_mpi_ library/bignum.o
+    # Check that p256m was built
+    grep -q p256_ecdsa_ library/libmbedcrypto.a
+
+    # In "config-tfm.h" we disabled CIPHER_C tweaking TF-M's configuration
+    # files, so we want to ensure that it has not be re-enabled accidentally.
+    not grep mbedtls_cipher library/cipher.o
+
+    # Run the tests
+    msg "test: TF-M config + p256m driver + accel ECDH(E)/ECDSA"
+    make test
+}
+
+# Keep this in sync with component_test_tfm_config_p256m_driver_accel_ec() as
+# they are both meant to be used in analyze_outcomes.py for driver's coverage
+# analysis.
+component_test_tfm_config () {
+    common_tfm_config
+
+    # Disable P256M driver, which is on by default, so that analyze_outcomes
+    # can compare this test with test_tfm_config_p256m_driver_accel_ec
+    echo "#undef MBEDTLS_PSA_P256M_DRIVER_ENABLED" >> "$CONFIG_H"
+
+    msg "build: TF-M config"
+    make CFLAGS='-Werror -Wall -Wextra -I../tests/include/spe' tests
+
+    # Check that p256m was not built
+    not grep p256_ecdsa_ library/libmbedcrypto.a
+
+    # In "config-tfm.h" we disabled CIPHER_C tweaking TF-M's configuration
+    # files, so we want to ensure that it has not be re-enabled accidentally.
+    not grep mbedtls_cipher library/cipher.o
+
+    msg "test: TF-M config"
+    make test
+}
+
+# Common helper for component_full_without_ecdhe_ecdsa() and
+# component_full_without_ecdhe_ecdsa_and_tls13() which:
+# - starts from the "full" configuration minus the list of symbols passed in
+#   as 1st parameter
+# - build
+# - test only TLS (i.e. test_suite_tls and ssl-opt)
+build_full_minus_something_and_test_tls () {
+    symbols_to_disable="$1"
+
+    msg "build: full minus something, test TLS"
+
+    scripts/config.py full
+    for sym in $symbols_to_disable; do
+        echo "Disabling $sym"
+        scripts/config.py unset $sym
+    done
+
+    make
+
+    msg "test: full minus something, test TLS"
+    ( cd tests; ./test_suite_ssl )
+
+    msg "ssl-opt: full minus something, test TLS"
+    tests/ssl-opt.sh
+}
+
+component_full_without_ecdhe_ecdsa () {
+    build_full_minus_something_and_test_tls "MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED"
+}
+
+component_full_without_ecdhe_ecdsa_and_tls13 () {
+    build_full_minus_something_and_test_tls "MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
+                                             MBEDTLS_SSL_PROTO_TLS1_3"
+}
+
+# This is an helper used by:
+# - component_test_psa_ecc_key_pair_no_derive
+# - component_test_psa_ecc_key_pair_no_generate
+# The goal is to test with all PSA_WANT_KEY_TYPE_xxx_KEY_PAIR_yyy symbols
+# enabled, but one. Input arguments are as follows:
+# - $1 is the key type under test, i.e. ECC/RSA/DH
+# - $2 is the key option to be unset (i.e. generate, derive, etc)
+build_and_test_psa_want_key_pair_partial () {
+    key_type=$1
+    unset_option=$2
+    disabled_psa_want="PSA_WANT_KEY_TYPE_${key_type}_KEY_PAIR_${unset_option}"
+
+    msg "build: full - MBEDTLS_USE_PSA_CRYPTO - ${disabled_psa_want}"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+
+    # All the PSA_WANT_KEY_TYPE_xxx_KEY_PAIR_yyy are enabled by default in
+    # crypto_config.h so we just disable the one we don't want.
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset "$disabled_psa_want"
+
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
+
+    msg "test: full - MBEDTLS_USE_PSA_CRYPTO - ${disabled_psa_want}"
+    make test
+}
+
+component_test_psa_ecc_key_pair_no_derive () {
+    build_and_test_psa_want_key_pair_partial "ECC" "DERIVE"
+}
+
+component_test_psa_ecc_key_pair_no_generate () {
+    build_and_test_psa_want_key_pair_partial "ECC" "GENERATE"
+}
+
+config_psa_crypto_accel_rsa () {
+    driver_only=$1
+
+    # Start from crypto_full config (no X.509, no TLS)
+    helper_libtestdriver1_adjust_config "crypto_full"
+
+    if [ "$driver_only" -eq 1 ]; then
+        # Remove RSA support and its dependencies
+        scripts/config.py unset MBEDTLS_RSA_C
+        scripts/config.py unset MBEDTLS_PKCS1_V15
+        scripts/config.py unset MBEDTLS_PKCS1_V21
+
+        # We need PEM parsing in the test library as well to support the import
+        # of PEM encoded RSA keys.
+        scripts/config.py -f "$CONFIG_TEST_DRIVER_H" set MBEDTLS_PEM_PARSE_C
+        scripts/config.py -f "$CONFIG_TEST_DRIVER_H" set MBEDTLS_BASE64_C
+    fi
+}
+
+component_test_psa_crypto_config_accel_rsa_crypto () {
+    msg "build: crypto_full with accelerated RSA"
+
+    loc_accel_list="ALG_RSA_OAEP ALG_RSA_PSS \
+                    ALG_RSA_PKCS1V15_CRYPT ALG_RSA_PKCS1V15_SIGN \
+                    KEY_TYPE_RSA_PUBLIC_KEY \
+                    KEY_TYPE_RSA_KEY_PAIR_BASIC \
+                    KEY_TYPE_RSA_KEY_PAIR_GENERATE \
+                    KEY_TYPE_RSA_KEY_PAIR_IMPORT \
+                    KEY_TYPE_RSA_KEY_PAIR_EXPORT"
+
+    # Configure
+    # ---------
+
+    config_psa_crypto_accel_rsa 1
+
+    # Build
+    # -----
+
+    # These hashes are needed for unit tests.
+    loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
+                    ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512 ALG_MD5"
+    helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list"
+
+    helper_libtestdriver1_make_main "$loc_accel_list"
+
+    # Make sure this was not re-enabled by accident (additive config)
+    not grep mbedtls_rsa library/rsa.o
+
+    # Run the tests
+    # -------------
+
+    msg "test: crypto_full with accelerated RSA"
+    make test
+}
+
+component_test_psa_crypto_config_reference_rsa_crypto () {
+    msg "build: crypto_full with non-accelerated RSA"
+
+    # Configure
+    # ---------
+    config_psa_crypto_accel_rsa 0
+
+    # Build
+    # -----
+    make
+
+    # Run the tests
+    # -------------
+    msg "test: crypto_full with non-accelerated RSA"
+    make test
+}
+
+# This is a temporary test to verify that full RSA support is present even when
+# only one single new symbols (PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC) is defined.
+component_test_new_psa_want_key_pair_symbol () {
+    msg "Build: crypto config - MBEDTLS_RSA_C + PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC"
+
+    # Create a temporary output file unless there is already one set
+    if [ "$MBEDTLS_TEST_OUTCOME_FILE" ]; then
+        REMOVE_OUTCOME_ON_EXIT="no"
+    else
+        REMOVE_OUTCOME_ON_EXIT="yes"
+        MBEDTLS_TEST_OUTCOME_FILE="$PWD/out.csv"
+        export MBEDTLS_TEST_OUTCOME_FILE
+    fi
+
+    # Start from crypto configuration
+    scripts/config.py crypto
+
+    # Remove RSA support and its dependencies
+    scripts/config.py unset MBEDTLS_PKCS1_V15
+    scripts/config.py unset MBEDTLS_PKCS1_V21
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
+    scripts/config.py unset MBEDTLS_RSA_C
+    scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
+
+    # Enable PSA support
+    scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
+
+    # Keep only PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC enabled in order to ensure
+    # that proper translations is done in crypto_legacy.h.
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_IMPORT
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_EXPORT
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE
+
+    make
+
+    msg "Test: crypto config - MBEDTLS_RSA_C + PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC"
+    make test
+
+    # Parse only 1 relevant line from the outcome file, i.e. a test which is
+    # performing RSA signature.
+    msg "Verify that 'RSA PKCS1 Sign #1 (SHA512, 1536 bits RSA)' is PASS"
+    cat $MBEDTLS_TEST_OUTCOME_FILE | grep 'RSA PKCS1 Sign #1 (SHA512, 1536 bits RSA)' | grep -q "PASS"
+
+    if [ "$REMOVE_OUTCOME_ON_EXIT" == "yes" ]; then
+        rm $MBEDTLS_TEST_OUTCOME_FILE
+    fi
+}
+
+component_test_psa_crypto_config_accel_hash () {
+    msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated hash"
+
+    loc_accel_list="ALG_MD5 ALG_RIPEMD160 ALG_SHA_1 \
+                    ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
+                    ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
+
+    # Configure
+    # ---------
+
+    # Start from default config (no USE_PSA)
+    helper_libtestdriver1_adjust_config "default"
+
+    # Disable the things that are being accelerated
+    scripts/config.py unset MBEDTLS_MD5_C
+    scripts/config.py unset MBEDTLS_RIPEMD160_C
+    scripts/config.py unset MBEDTLS_SHA1_C
+    scripts/config.py unset MBEDTLS_SHA224_C
+    scripts/config.py unset MBEDTLS_SHA256_C
+    scripts/config.py unset MBEDTLS_SHA384_C
+    scripts/config.py unset MBEDTLS_SHA512_C
+    scripts/config.py unset MBEDTLS_SHA3_C
+
+    # Build
+    # -----
+
+    helper_libtestdriver1_make_drivers "$loc_accel_list"
+
+    helper_libtestdriver1_make_main "$loc_accel_list"
+
+    # There's a risk of something getting re-enabled via config_psa.h;
+    # make sure it did not happen. Note: it's OK for MD_C to be enabled.
+    not grep mbedtls_md5 library/md5.o
+    not grep mbedtls_sha1 library/sha1.o
+    not grep mbedtls_sha256 library/sha256.o
+    not grep mbedtls_sha512 library/sha512.o
+    not grep mbedtls_ripemd160 library/ripemd160.o
+
+    # Run the tests
+    # -------------
+
+    msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated hash"
+    make test
+}
+
+component_test_psa_crypto_config_accel_hash_keep_builtins () {
+    msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated+builtin hash"
+    # This component ensures that all the test cases for
+    # md_psa_dynamic_dispatch with legacy+driver in test_suite_md are run.
+
+    loc_accel_list="ALG_MD5 ALG_RIPEMD160 ALG_SHA_1 \
+                    ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
+                    ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
+
+    # Start from default config (no USE_PSA)
+    helper_libtestdriver1_adjust_config "default"
+
+    helper_libtestdriver1_make_drivers "$loc_accel_list"
+
+    helper_libtestdriver1_make_main "$loc_accel_list"
+
+    msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated+builtin hash"
+    make test
+}
+
+# Auxiliary function to build config for hashes with and without drivers
+config_psa_crypto_hash_use_psa () {
+    driver_only="$1"
+    # start with config full for maximum coverage (also enables USE_PSA)
+    helper_libtestdriver1_adjust_config "full"
+    if [ "$driver_only" -eq 1 ]; then
+        # disable the built-in implementation of hashes
+        scripts/config.py unset MBEDTLS_MD5_C
+        scripts/config.py unset MBEDTLS_RIPEMD160_C
+        scripts/config.py unset MBEDTLS_SHA1_C
+        scripts/config.py unset MBEDTLS_SHA224_C
+        scripts/config.py unset MBEDTLS_SHA256_C # see external RNG below
+        scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
+        scripts/config.py unset MBEDTLS_SHA384_C
+        scripts/config.py unset MBEDTLS_SHA512_C
+        scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT
+        scripts/config.py unset MBEDTLS_SHA3_C
+    fi
+}
+
+# Note that component_test_psa_crypto_config_reference_hash_use_psa
+# is related to this component and both components need to be kept in sync.
+# For details please see comments for component_test_psa_crypto_config_reference_hash_use_psa.
+component_test_psa_crypto_config_accel_hash_use_psa () {
+    msg "test: full with accelerated hashes"
+
+    loc_accel_list="ALG_MD5 ALG_RIPEMD160 ALG_SHA_1 \
+                    ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
+                    ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
+
+    # Configure
+    # ---------
+
+    config_psa_crypto_hash_use_psa 1
+
+    # Build
+    # -----
+
+    helper_libtestdriver1_make_drivers "$loc_accel_list"
+
+    helper_libtestdriver1_make_main "$loc_accel_list"
+
+    # There's a risk of something getting re-enabled via config_psa.h;
+    # make sure it did not happen. Note: it's OK for MD_C to be enabled.
+    not grep mbedtls_md5 library/md5.o
+    not grep mbedtls_sha1 library/sha1.o
+    not grep mbedtls_sha256 library/sha256.o
+    not grep mbedtls_sha512 library/sha512.o
+    not grep mbedtls_ripemd160 library/ripemd160.o
+
+    # Run the tests
+    # -------------
+
+    msg "test: full with accelerated hashes"
+    make test
+
+    # This is mostly useful so that we can later compare outcome files with
+    # the reference config in analyze_outcomes.py, to check that the
+    # dependency declarations in ssl-opt.sh and in TLS code are correct.
+    msg "test: ssl-opt.sh, full with accelerated hashes"
+    tests/ssl-opt.sh
+
+    # This is to make sure all ciphersuites are exercised, but we don't need
+    # interop testing (besides, we already got some from ssl-opt.sh).
+    msg "test: compat.sh, full with accelerated hashes"
+    tests/compat.sh -p mbedTLS -V YES
+}
+
+# This component provides reference configuration for test_psa_crypto_config_accel_hash_use_psa
+# without accelerated hash. The outcome from both components are used by the analyze_outcomes.py
+# script to find regression in test coverage when accelerated hash is used (tests and ssl-opt).
+# Both components need to be kept in sync.
+component_test_psa_crypto_config_reference_hash_use_psa () {
+    msg "test: full without accelerated hashes"
+
+    config_psa_crypto_hash_use_psa 0
+
+    make
+
+    msg "test: full without accelerated hashes"
+    make test
+
+    msg "test: ssl-opt.sh, full without accelerated hashes"
+    tests/ssl-opt.sh
+}
+
+# Auxiliary function to build config for hashes with and without drivers
+config_psa_crypto_hmac_use_psa () {
+    driver_only="$1"
+    # start with config full for maximum coverage (also enables USE_PSA)
+    helper_libtestdriver1_adjust_config "full"
+
+    if [ "$driver_only" -eq 1 ]; then
+        # Disable MD_C in order to disable the builtin support for HMAC. MD_LIGHT
+        # is still enabled though (for ENTROPY_C among others).
+        scripts/config.py unset MBEDTLS_MD_C
+        # Disable also the builtin hashes since they are supported by the driver
+        # and MD module is able to perform PSA dispathing.
+        scripts/config.py unset-all MBEDTLS_SHA
+        scripts/config.py unset MBEDTLS_MD5_C
+        scripts/config.py unset MBEDTLS_RIPEMD160_C
+    fi
+
+    # Direct dependencies of MD_C. We disable them also in the reference
+    # component to work with the same set of features.
+    scripts/config.py unset MBEDTLS_PKCS7_C
+    scripts/config.py unset MBEDTLS_PKCS5_C
+    scripts/config.py unset MBEDTLS_HMAC_DRBG_C
+    scripts/config.py unset MBEDTLS_HKDF_C
+    # Dependencies of HMAC_DRBG
+    scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_DETERMINISTIC_ECDSA
+}
+
+component_test_psa_crypto_config_accel_hmac () {
+    msg "test: full with accelerated hmac"
+
+    loc_accel_list="ALG_HMAC KEY_TYPE_HMAC \
+                    ALG_MD5 ALG_RIPEMD160 ALG_SHA_1 \
+                    ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \
+                    ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512"
+
+    # Configure
+    # ---------
+
+    config_psa_crypto_hmac_use_psa 1
+
+    # Build
+    # -----
+
+    helper_libtestdriver1_make_drivers "$loc_accel_list"
+
+    helper_libtestdriver1_make_main "$loc_accel_list"
+
+    # Ensure that built-in support for HMAC is disabled.
+    not grep mbedtls_md_hmac library/md.o
+
+    # Run the tests
+    # -------------
+
+    msg "test: full with accelerated hmac"
+    make test
+}
+
+component_test_psa_crypto_config_reference_hmac () {
+    msg "test: full without accelerated hmac"
+
+    config_psa_crypto_hmac_use_psa 0
+
+    make
+
+    msg "test: full without accelerated hmac"
+    make test
+}
+
+component_test_psa_crypto_config_accel_des () {
+    msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated DES"
+
+    # Albeit this components aims at accelerating DES which should only support
+    # CBC and ECB modes, we need to accelerate more than that otherwise DES_C
+    # would automatically be re-enabled by "config_adjust_legacy_from_psa.c"
+    loc_accel_list="ALG_ECB_NO_PADDING ALG_CBC_NO_PADDING ALG_CBC_PKCS7 \
+                    ALG_CTR ALG_CFB ALG_OFB ALG_XTS ALG_CMAC \
+                    KEY_TYPE_DES"
+
+    # Note: we cannot accelerate all ciphers' key types otherwise we would also
+    # have to either disable CCM/GCM or accelerate them, but that's out of scope
+    # of this component. This limitation will be addressed by #8598.
+
+    # Configure
+    # ---------
+
+    # Start from the full config
+    helper_libtestdriver1_adjust_config "full"
+
+    # Disable the things that are being accelerated
+    scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
+    scripts/config.py unset MBEDTLS_CIPHER_PADDING_PKCS7
+    scripts/config.py unset MBEDTLS_CIPHER_MODE_CTR
+    scripts/config.py unset MBEDTLS_CIPHER_MODE_CFB
+    scripts/config.py unset MBEDTLS_CIPHER_MODE_OFB
+    scripts/config.py unset MBEDTLS_CIPHER_MODE_XTS
+    scripts/config.py unset MBEDTLS_DES_C
+    scripts/config.py unset MBEDTLS_CMAC_C
+
+    # Build
+    # -----
+
+    helper_libtestdriver1_make_drivers "$loc_accel_list"
+
+    helper_libtestdriver1_make_main "$loc_accel_list"
+
+    # Make sure this was not re-enabled by accident (additive config)
+    not grep mbedtls_des* library/des.o
+
+    # Run the tests
+    # -------------
+
+    msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated DES"
+    make test
+}
+
+component_test_psa_crypto_config_accel_aead () {
+    msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated AEAD"
+
+    loc_accel_list="ALG_GCM ALG_CCM ALG_CHACHA20_POLY1305 \
+                    KEY_TYPE_AES KEY_TYPE_CHACHA20 KEY_TYPE_ARIA KEY_TYPE_CAMELLIA"
+
+    # Configure
+    # ---------
+
+    # Start from full config
+    helper_libtestdriver1_adjust_config "full"
+
+    # Disable things that are being accelerated
+    scripts/config.py unset MBEDTLS_GCM_C
+    scripts/config.py unset MBEDTLS_CCM_C
+    scripts/config.py unset MBEDTLS_CHACHAPOLY_C
+
+    # Disable CCM_STAR_NO_TAG because this re-enables CCM_C.
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CCM_STAR_NO_TAG
+
+    # Build
+    # -----
+
+    helper_libtestdriver1_make_drivers "$loc_accel_list"
+
+    helper_libtestdriver1_make_main "$loc_accel_list"
+
+    # Make sure this was not re-enabled by accident (additive config)
+    not grep mbedtls_ccm library/ccm.o
+    not grep mbedtls_gcm library/gcm.o
+    not grep mbedtls_chachapoly library/chachapoly.o
+
+    # Run the tests
+    # -------------
+
+    msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated AEAD"
+    make test
+}
+
+# This is a common configuration function used in:
+# - component_test_psa_crypto_config_accel_cipher_aead_cmac
+# - component_test_psa_crypto_config_reference_cipher_aead_cmac
+common_psa_crypto_config_accel_cipher_aead_cmac () {
+    # Start from the full config
+    helper_libtestdriver1_adjust_config "full"
+
+    scripts/config.py unset MBEDTLS_NIST_KW_C
+}
+
+# The 2 following test components, i.e.
+# - component_test_psa_crypto_config_accel_cipher_aead_cmac
+# - component_test_psa_crypto_config_reference_cipher_aead_cmac
+# are meant to be used together in analyze_outcomes.py script in order to test
+# driver's coverage for ciphers and AEADs.
+component_test_psa_crypto_config_accel_cipher_aead_cmac () {
+    msg "build: full config with accelerated cipher inc. AEAD and CMAC"
+
+    loc_accel_list="ALG_ECB_NO_PADDING ALG_CBC_NO_PADDING ALG_CBC_PKCS7 ALG_CTR ALG_CFB \
+                    ALG_OFB ALG_XTS ALG_STREAM_CIPHER ALG_CCM_STAR_NO_TAG \
+                    ALG_GCM ALG_CCM ALG_CHACHA20_POLY1305 ALG_CMAC \
+                    KEY_TYPE_DES KEY_TYPE_AES KEY_TYPE_ARIA KEY_TYPE_CHACHA20 KEY_TYPE_CAMELLIA"
+
+    # Configure
+    # ---------
+
+    common_psa_crypto_config_accel_cipher_aead_cmac
+
+    # Disable the things that are being accelerated
+    scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
+    scripts/config.py unset MBEDTLS_CIPHER_PADDING_PKCS7
+    scripts/config.py unset MBEDTLS_CIPHER_MODE_CTR
+    scripts/config.py unset MBEDTLS_CIPHER_MODE_CFB
+    scripts/config.py unset MBEDTLS_CIPHER_MODE_OFB
+    scripts/config.py unset MBEDTLS_CIPHER_MODE_XTS
+    scripts/config.py unset MBEDTLS_GCM_C
+    scripts/config.py unset MBEDTLS_CCM_C
+    scripts/config.py unset MBEDTLS_CHACHAPOLY_C
+    scripts/config.py unset MBEDTLS_CMAC_C
+    scripts/config.py unset MBEDTLS_DES_C
+    scripts/config.py unset MBEDTLS_AES_C
+    scripts/config.py unset MBEDTLS_ARIA_C
+    scripts/config.py unset MBEDTLS_CHACHA20_C
+    scripts/config.py unset MBEDTLS_CAMELLIA_C
+
+    # Disable CIPHER_C entirely as all ciphers/AEADs are accelerated and PSA
+    # does not depend on it.
+    scripts/config.py unset MBEDTLS_CIPHER_C
+
+    # Build
+    # -----
+
+    helper_libtestdriver1_make_drivers "$loc_accel_list"
+
+    helper_libtestdriver1_make_main "$loc_accel_list"
+
+    # Make sure this was not re-enabled by accident (additive config)
+    not grep mbedtls_cipher library/cipher.o
+    not grep mbedtls_des library/des.o
+    not grep mbedtls_aes library/aes.o
+    not grep mbedtls_aria library/aria.o
+    not grep mbedtls_camellia library/camellia.o
+    not grep mbedtls_ccm library/ccm.o
+    not grep mbedtls_gcm library/gcm.o
+    not grep mbedtls_chachapoly library/chachapoly.o
+    not grep mbedtls_cmac library/cmac.o
+
+    # Run the tests
+    # -------------
+
+    msg "test: full config with accelerated cipher inc. AEAD and CMAC"
+    make test
+
+    msg "ssl-opt: full config with accelerated cipher inc. AEAD and CMAC"
+    tests/ssl-opt.sh
+
+    msg "compat.sh: full config with accelerated cipher inc. AEAD and CMAC"
+    tests/compat.sh -V NO -p mbedTLS
+}
+
+component_test_psa_crypto_config_reference_cipher_aead_cmac () {
+    msg "build: full config with non-accelerated cipher inc. AEAD and CMAC"
+    common_psa_crypto_config_accel_cipher_aead_cmac
+
+    make
+
+    msg "test: full config with non-accelerated cipher inc. AEAD and CMAC"
+    make test
+
+    msg "ssl-opt: full config with non-accelerated cipher inc. AEAD and CMAC"
+    tests/ssl-opt.sh
+
+    msg "compat.sh: full config with non-accelerated cipher inc. AEAD and CMAC"
+    tests/compat.sh -V NO -p mbedTLS
+}
+
+common_block_cipher_dispatch () {
+    TEST_WITH_DRIVER="$1"
+
+    # Start from the full config
+    helper_libtestdriver1_adjust_config "full"
+
+    if [ "$TEST_WITH_DRIVER" -eq 1 ]; then
+        # Disable key types that are accelerated (there is no legacy equivalent
+        # symbol for ECB)
+        scripts/config.py unset MBEDTLS_AES_C
+        scripts/config.py unset MBEDTLS_ARIA_C
+        scripts/config.py unset MBEDTLS_CAMELLIA_C
+    fi
+
+    # Disable cipher's modes that, when not accelerated, cause
+    # legacy key types to be re-enabled in "config_adjust_legacy_from_psa.h".
+    # Keep this also in the reference component in order to skip the same tests
+    # that were skipped in the accelerated one.
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CTR
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CFB
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_OFB
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_NO_PADDING
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_PKCS7
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CMAC
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CCM_STAR_NO_TAG
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_PBKDF2_AES_CMAC_PRF_128
+
+    # Disable direct dependency on AES_C
+    scripts/config.py unset MBEDTLS_NIST_KW_C
+
+    # Prevent the cipher module from using deprecated PSA path. The reason is
+    # that otherwise there will be tests relying on "aes_info" (defined in
+    # "cipher_wrap.c") whose functions are not available when AES_C is
+    # not defined. ARIA and Camellia are not a problem in this case because
+    # the PSA path is not tested for these key types.
+    scripts/config.py set MBEDTLS_DEPRECATED_REMOVED
+}
+
+component_test_full_block_cipher_psa_dispatch () {
+    msg "build: full + PSA dispatch in block_cipher"
+
+    loc_accel_list="ALG_ECB_NO_PADDING \
+                    KEY_TYPE_AES KEY_TYPE_ARIA KEY_TYPE_CAMELLIA"
+
+    # Configure
+    # ---------
+
+    common_block_cipher_dispatch 1
+
+    # Build
+    # -----
+
+    helper_libtestdriver1_make_drivers "$loc_accel_list"
+
+    helper_libtestdriver1_make_main "$loc_accel_list"
+
+    # Make sure disabled components were not re-enabled by accident (additive
+    # config)
+    not grep mbedtls_aes_ library/aes.o
+    not grep mbedtls_aria_ library/aria.o
+    not grep mbedtls_camellia_ library/camellia.o
+
+    # Run the tests
+    # -------------
+
+    msg "test: full + PSA dispatch in block_cipher"
+    make test
+}
+
+# This is the reference component of component_test_full_block_cipher_psa_dispatch
+component_test_full_block_cipher_legacy_dispatch () {
+    msg "build: full + legacy dispatch in block_cipher"
+
+    common_block_cipher_dispatch 0
+
+    make
+
+    msg "test: full + legacy dispatch in block_cipher"
+    make test
+}
+
+component_test_aead_chachapoly_disabled () {
+    msg "build: full minus CHACHAPOLY"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_CHACHAPOLY_C
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CHACHA20_POLY1305
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
+
+    msg "test: full minus CHACHAPOLY"
+    make test
+}
+
+component_test_aead_only_ccm () {
+    msg "build: full minus CHACHAPOLY and GCM"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_CHACHAPOLY_C
+    scripts/config.py unset MBEDTLS_GCM_C
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CHACHA20_POLY1305
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_GCM
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
+
+    msg "test: full minus CHACHAPOLY and GCM"
+    make test
+}
+
+component_test_ccm_aes_sha256 () {
+    msg "build: CCM + AES + SHA256 configuration"
+
+    cp "$CONFIG_TEST_DRIVER_H" "$CONFIG_H"
+    cp configs/crypto-config-ccm-aes-sha256.h "$CRYPTO_CONFIG_H"
+
+    make
+
+    msg "test: CCM + AES + SHA256 configuration"
+    make test
+}
+
+# This should be renamed to test and updated once the accelerator ECDH code is in place and ready to test.
+component_build_psa_accel_alg_ecdh () {
+    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_ECDH without MBEDTLS_ECDH_C"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    scripts/config.py unset MBEDTLS_ECDH_C
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
+    scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
+    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_ECDH -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
+}
+
+# This should be renamed to test and updated once the accelerator HMAC code is in place and ready to test.
+component_build_psa_accel_alg_hmac () {
+    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_HMAC"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_HMAC -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
+}
+
+# This should be renamed to test and updated once the accelerator HKDF code is in place and ready to test.
+component_build_psa_accel_alg_hkdf () {
+    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_HKDF without MBEDTLS_HKDF_C"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py unset MBEDTLS_HKDF_C
+    # Make sure to unset TLS1_3 since it requires HKDF_C and will not build properly without it.
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_HKDF -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
+}
+
+# This should be renamed to test and updated once the accelerator MD5 code is in place and ready to test.
+component_build_psa_accel_alg_md5 () {
+    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_MD5 - other hashes"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS
+    scripts/config.py unset MBEDTLS_LMS_C
+    scripts/config.py unset MBEDTLS_LMS_PRIVATE
+    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_MD5 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
+}
+
+# This should be renamed to test and updated once the accelerator RIPEMD160 code is in place and ready to test.
+component_build_psa_accel_alg_ripemd160 () {
+    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RIPEMD160 - other hashes"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS
+    scripts/config.py unset MBEDTLS_LMS_C
+    scripts/config.py unset MBEDTLS_LMS_PRIVATE
+    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RIPEMD160 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
+}
+
+# This should be renamed to test and updated once the accelerator SHA1 code is in place and ready to test.
+component_build_psa_accel_alg_sha1 () {
+    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_1 - other hashes"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS
+    scripts/config.py unset MBEDTLS_LMS_C
+    scripts/config.py unset MBEDTLS_LMS_PRIVATE
+    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_1 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
+}
+
+# This should be renamed to test and updated once the accelerator SHA224 code is in place and ready to test.
+component_build_psa_accel_alg_sha224 () {
+    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_224 - other hashes"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS
+    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_224 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
+}
+
+# This should be renamed to test and updated once the accelerator SHA256 code is in place and ready to test.
+component_build_psa_accel_alg_sha256 () {
+    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_256 - other hashes"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512
+    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_256 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
+}
+
+# This should be renamed to test and updated once the accelerator SHA384 code is in place and ready to test.
+component_build_psa_accel_alg_sha384 () {
+    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_384 - other hashes"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS
+    scripts/config.py unset MBEDTLS_LMS_C
+    scripts/config.py unset MBEDTLS_LMS_PRIVATE
+    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_384 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
+}
+
+# This should be renamed to test and updated once the accelerator SHA512 code is in place and ready to test.
+component_build_psa_accel_alg_sha512 () {
+    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_512 - other hashes"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS
+    scripts/config.py unset MBEDTLS_LMS_C
+    scripts/config.py unset MBEDTLS_LMS_PRIVATE
+    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_512 -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
+}
+
+# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
+component_build_psa_accel_alg_rsa_pkcs1v15_crypt () {
+    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_PKCS1V15_CRYPT + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PKCS1V15_CRYPT 1
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_SIGN
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_OAEP
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PSS
+    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_PKCS1V15_CRYPT -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
+}
+
+# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
+component_build_psa_accel_alg_rsa_pkcs1v15_sign () {
+    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_PKCS1V15_SIGN + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PKCS1V15_SIGN 1
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_OAEP
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PSS
+    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_PKCS1V15_SIGN -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
+}
+
+# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
+component_build_psa_accel_alg_rsa_oaep () {
+    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_OAEP + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_OAEP 1
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_SIGN
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PSS
+    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_OAEP -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
+}
+
+# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
+component_build_psa_accel_alg_rsa_pss () {
+    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_PSS + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PSS 1
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_SIGN
+    scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_OAEP
+    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_PSS -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
+}
+
+# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
+component_build_psa_accel_key_type_rsa_key_pair () {
+    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_xxx + PSA_WANT_ALG_RSA_PSS"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PSS 1
+    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC 1
+    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_IMPORT 1
+    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_EXPORT 1
+    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE 1
+    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_KEY_PAIR -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
+}
+
+# This should be renamed to test and updated once the accelerator RSA code is in place and ready to test.
+component_build_psa_accel_key_type_rsa_public_key () {
+    msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY + PSA_WANT_ALG_RSA_PSS"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PSS 1
+    scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY 1
+    # Need to define the correct symbol and include the test driver header path in order to build with the test driver
+    make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_PUBLIC_KEY -I../tests/include" LDFLAGS="$ASAN_CFLAGS"
+}
+
+
+support_build_tfm_armcc () {
+    support_build_armcc
+}
+
+component_build_tfm_armcc () {
+    # test the TF-M configuration can build cleanly with various warning flags enabled
+    cp configs/config-tfm.h "$CONFIG_H"
+
+    msg "build: TF-M config, armclang armv7-m thumb2"
+    armc6_build_test "--target=arm-arm-none-eabi -march=armv7-m -mthumb -Os -std=c99 -Werror -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wimplicit-fallthrough -Wshadow -Wvla -Wformat=2 -Wno-format-nonliteral -Wshadow -Wasm-operand-widths -Wunused -I../tests/include/spe"
+}
+
+component_build_tfm () {
+    # Check that the TF-M configuration can build cleanly with various
+    # warning flags enabled. We don't build or run tests, since the
+    # TF-M configuration needs a TF-M platform. A tweaked version of
+    # the configuration that works on mainstream platforms is in
+    # configs/config-tfm.h, tested via test-ref-configs.pl.
+    cp configs/config-tfm.h "$CONFIG_H"
+
+    msg "build: TF-M config, clang, armv7-m thumb2"
+    make lib CC="clang" CFLAGS="--target=arm-linux-gnueabihf -march=armv7-m -mthumb -Os -std=c99 -Werror -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wimplicit-fallthrough -Wshadow -Wvla -Wformat=2 -Wno-format-nonliteral -Wshadow -Wasm-operand-widths -Wunused -I../tests/include/spe"
+
+    msg "build: TF-M config, gcc native build"
+    make clean
+    make lib CC="gcc" CFLAGS="-Os -std=c99 -Werror -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wshadow -Wvla -Wformat=2 -Wno-format-nonliteral -Wshadow -Wformat-signedness -Wlogical-op -I../tests/include/spe"
+}
+
+# Test that the given .o file builds with all (valid) combinations of the given options.
+#
+# Syntax: build_test_config_combos FILE VALIDATOR_FUNCTION OPT1 OPT2 ...
+#
+# The validator function is the name of a function to validate the combination of options.
+# It may be "" if all combinations are valid.
+# It receives a string containing a combination of options, as passed to the compiler,
+# e.g. "-DOPT1 -DOPT2 ...". It must return 0 iff the combination is valid, non-zero if invalid.
+build_test_config_combos () {
+    file=$1
+    shift
+    validate_options=$1
+    shift
+    options=("$@")
+
+    # clear all of the options so that they can be overridden on the clang commandline
+    for opt in "${options[@]}"; do
+        ./scripts/config.py unset ${opt}
+    done
+
+    # enter the directory containing the target file & strip the dir from the filename
+    cd $(dirname ${file})
+    file=$(basename ${file})
+
+    # The most common issue is unused variables/functions, so ensure -Wunused is set.
+    warning_flags="-Werror -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wimplicit-fallthrough -Wshadow -Wvla -Wformat=2 -Wno-format-nonliteral -Wshadow -Wasm-operand-widths -Wunused"
+
+    # Extract the command generated by the Makefile to build the target file.
+    # This ensures that we have any include paths, macro definitions, etc
+    # that may be applied by make.
+    # Add -fsyntax-only as we only want a syntax check and don't need to generate a file.
+    compile_cmd="clang \$(LOCAL_CFLAGS) ${warning_flags} -fsyntax-only -c"
+
+    makefile=$(TMPDIR=. mktemp)
+    deps=""
+
+    len=${#options[@]}
+    source_file=${file%.o}.c
+
+    targets=0
+    echo 'include Makefile' >${makefile}
+
+    for ((i = 0; i < $((2**${len})); i++)); do
+        # generate each of 2^n combinations of options
+        # each bit of $i is used to determine if options[i] will be set or not
+        target="t"
+        clang_args=""
+        for ((j = 0; j < ${len}; j++)); do
+            if (((i >> j) & 1)); then
+                opt=-D${options[$j]}
+                clang_args="${clang_args} ${opt}"
+                target="${target}${opt}"
+            fi
+        done
+
+        # if combination is not known to be invalid, add it to the makefile
+        if [[ -z $validate_options ]] || $validate_options "${clang_args}"; then
+            cmd="${compile_cmd} ${clang_args}"
+            echo "${target}: ${source_file}; $cmd ${source_file}" >> ${makefile}
+
+            deps="${deps} ${target}"
+            ((++targets))
+        fi
+    done
+
+    echo "build_test_config_combos: ${deps}" >> ${makefile}
+
+    # execute all of the commands via Make (probably in parallel)
+    make -s -f ${makefile} build_test_config_combos
+    echo "$targets targets checked"
+
+    # clean up the temporary makefile
+    rm ${makefile}
+}
+
+validate_aes_config_variations () {
+    if [[ "$1" == *"MBEDTLS_AES_USE_HARDWARE_ONLY"* ]]; then
+        if [[ "$1" == *"MBEDTLS_PADLOCK_C"* ]]; then
+            return 1
+        fi
+        if [[ !(("$HOSTTYPE" == "aarch64" && "$1" != *"MBEDTLS_AESCE_C"*) || \
+                ("$HOSTTYPE" == "x86_64"  && "$1" != *"MBEDTLS_AESNI_C"*)) ]]; then
+            return 1
+        fi
+    fi
+    return 0
+}
+
+component_build_aes_variations () {
+    # 18s - around 90ms per clang invocation on M1 Pro
+    #
+    # aes.o has many #if defined(...) guards that intersect in complex ways.
+    # Test that all the combinations build cleanly.
+
+    MBEDTLS_ROOT_DIR="$PWD"
+    msg "build: aes.o for all combinations of relevant config options"
+
+    build_test_config_combos library/aes.o validate_aes_config_variations \
+        "MBEDTLS_AES_SETKEY_ENC_ALT" "MBEDTLS_AES_DECRYPT_ALT" \
+        "MBEDTLS_AES_ROM_TABLES" "MBEDTLS_AES_ENCRYPT_ALT" "MBEDTLS_AES_SETKEY_DEC_ALT" \
+        "MBEDTLS_AES_FEWER_TABLES" "MBEDTLS_PADLOCK_C" "MBEDTLS_AES_USE_HARDWARE_ONLY" \
+        "MBEDTLS_AESNI_C" "MBEDTLS_AESCE_C" "MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH"
+
+    cd "$MBEDTLS_ROOT_DIR"
+    msg "build: aes.o for all combinations of relevant config options + BLOCK_CIPHER_NO_DECRYPT"
+
+    # MBEDTLS_BLOCK_CIPHER_NO_DECRYPT is incompatible with ECB in PSA, CBC/XTS/NIST_KW/DES,
+    # manually set or unset those configurations to check
+    # MBEDTLS_BLOCK_CIPHER_NO_DECRYPT with various combinations in aes.o.
+    scripts/config.py set MBEDTLS_BLOCK_CIPHER_NO_DECRYPT
+    scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
+    scripts/config.py unset MBEDTLS_CIPHER_MODE_XTS
+    scripts/config.py unset MBEDTLS_DES_C
+    scripts/config.py unset MBEDTLS_NIST_KW_C
+    build_test_config_combos library/aes.o validate_aes_config_variations \
+        "MBEDTLS_AES_SETKEY_ENC_ALT" "MBEDTLS_AES_DECRYPT_ALT" \
+        "MBEDTLS_AES_ROM_TABLES" "MBEDTLS_AES_ENCRYPT_ALT" "MBEDTLS_AES_SETKEY_DEC_ALT" \
+        "MBEDTLS_AES_FEWER_TABLES" "MBEDTLS_PADLOCK_C" "MBEDTLS_AES_USE_HARDWARE_ONLY" \
+        "MBEDTLS_AESNI_C" "MBEDTLS_AESCE_C" "MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH"
+}
+
+component_test_no_platform () {
+    # Full configuration build, without platform support, file IO and net sockets.
+    # This should catch missing mbedtls_printf definitions, and by disabling file
+    # IO, it should catch missing '#include <stdio.h>'
+    msg "build: full config except platform/fsio/net, make, gcc, C99" # ~ 30s
+    scripts/config.py full_no_platform
+    scripts/config.py unset MBEDTLS_PLATFORM_C
+    scripts/config.py unset MBEDTLS_NET_C
+    scripts/config.py unset MBEDTLS_FS_IO
+    scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C
+    scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C
+    scripts/config.py unset MBEDTLS_PSA_ITS_FILE_C
+    scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED
+    # Note, _DEFAULT_SOURCE needs to be defined for platforms using glibc version >2.19,
+    # to re-enable platform integration features otherwise disabled in C99 builds
+    make CC=gcc CFLAGS='-Werror -Wall -Wextra -std=c99 -pedantic -Os -D_DEFAULT_SOURCE' lib programs
+    make CC=gcc CFLAGS='-Werror -Wall -Wextra -Os' test
+}
+
+component_build_no_std_function () {
+    # catch compile bugs in _uninit functions
+    msg "build: full config with NO_STD_FUNCTION, make, gcc" # ~ 30s
+    scripts/config.py full
+    scripts/config.py set MBEDTLS_PLATFORM_NO_STD_FUNCTIONS
+    scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED
+    scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT
+    CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Check .
+    make
+}
+
+component_build_no_ssl_srv () {
+    msg "build: full config except SSL server, make, gcc" # ~ 30s
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_SSL_SRV_C
+    make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1'
+}
+
+component_build_no_ssl_cli () {
+    msg "build: full config except SSL client, make, gcc" # ~ 30s
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_SSL_CLI_C
+    make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1'
+}
+
+component_build_no_sockets () {
+    # Note, C99 compliance can also be tested with the sockets support disabled,
+    # as that requires a POSIX platform (which isn't the same as C99).
+    msg "build: full config except net_sockets.c, make, gcc -std=c99 -pedantic" # ~ 30s
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_NET_C # getaddrinfo() undeclared, etc.
+    scripts/config.py set MBEDTLS_NO_PLATFORM_ENTROPY # uses syscall() on GNU/Linux
+    make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1 -std=c99 -pedantic' lib
+}
+
+component_test_memory_buffer_allocator_backtrace () {
+    msg "build: default config with memory buffer allocator and backtrace enabled"
+    scripts/config.py set MBEDTLS_MEMORY_BUFFER_ALLOC_C
+    scripts/config.py set MBEDTLS_PLATFORM_MEMORY
+    scripts/config.py set MBEDTLS_MEMORY_BACKTRACE
+    scripts/config.py set MBEDTLS_MEMORY_DEBUG
+    cmake -DCMAKE_BUILD_TYPE:String=Release .
+    make
+
+    msg "test: MBEDTLS_MEMORY_BUFFER_ALLOC_C and MBEDTLS_MEMORY_BACKTRACE"
+    make test
+}
+
+component_test_memory_buffer_allocator () {
+    msg "build: default config with memory buffer allocator"
+    scripts/config.py set MBEDTLS_MEMORY_BUFFER_ALLOC_C
+    scripts/config.py set MBEDTLS_PLATFORM_MEMORY
+    cmake -DCMAKE_BUILD_TYPE:String=Release .
+    make
+
+    msg "test: MBEDTLS_MEMORY_BUFFER_ALLOC_C"
+    make test
+
+    msg "test: ssl-opt.sh, MBEDTLS_MEMORY_BUFFER_ALLOC_C"
+    # MBEDTLS_MEMORY_BUFFER_ALLOC is slow. Skip tests that tend to time out.
+    tests/ssl-opt.sh -e '^DTLS proxy'
+}
+
+component_test_no_max_fragment_length () {
+    # Run max fragment length tests with MFL disabled
+    msg "build: default config except MFL extension (ASan build)" # ~ 30s
+    scripts/config.py unset MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: ssl-opt.sh, MFL-related tests"
+    tests/ssl-opt.sh -f "Max fragment length"
+}
+
+component_test_asan_remove_peer_certificate () {
+    msg "build: default config with MBEDTLS_SSL_KEEP_PEER_CERTIFICATE disabled (ASan build)"
+    scripts/config.py unset MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE"
+    make test
+
+    msg "test: ssl-opt.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE"
+    tests/ssl-opt.sh
+
+    msg "test: compat.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE"
+    tests/compat.sh
+
+    msg "test: context-info.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE"
+    tests/context-info.sh
+}
+
+component_test_no_max_fragment_length_small_ssl_out_content_len () {
+    msg "build: no MFL extension, small SSL_OUT_CONTENT_LEN (ASan build)"
+    scripts/config.py unset MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+    scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 16384
+    scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 4096
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: MFL tests (disabled MFL extension case) & large packet tests"
+    tests/ssl-opt.sh -f "Max fragment length\|Large buffer"
+
+    msg "test: context-info.sh (disabled MFL extension case)"
+    tests/context-info.sh
+}
+
+component_test_variable_ssl_in_out_buffer_len () {
+    msg "build: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled (ASan build)"
+    scripts/config.py set MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled"
+    make test
+
+    msg "test: ssl-opt.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled"
+    tests/ssl-opt.sh
+
+    msg "test: compat.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled"
+    tests/compat.sh
+}
+
+component_test_dtls_cid_legacy () {
+    msg "build: MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy) enabled (ASan build)"
+    scripts/config.py set MBEDTLS_SSL_DTLS_CONNECTION_ID_COMPAT 1
+
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy)"
+    make test
+
+    msg "test: ssl-opt.sh, MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy) enabled"
+    tests/ssl-opt.sh
+
+    msg "test: compat.sh, MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy) enabled"
+    tests/compat.sh
+}
+
+component_test_ssl_alloc_buffer_and_mfl () {
+    msg "build: default config with memory buffer allocator and MFL extension"
+    scripts/config.py set MBEDTLS_MEMORY_BUFFER_ALLOC_C
+    scripts/config.py set MBEDTLS_PLATFORM_MEMORY
+    scripts/config.py set MBEDTLS_MEMORY_DEBUG
+    scripts/config.py set MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
+    scripts/config.py set MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
+    cmake -DCMAKE_BUILD_TYPE:String=Release .
+    make
+
+    msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH, MBEDTLS_MEMORY_BUFFER_ALLOC_C, MBEDTLS_MEMORY_DEBUG and MBEDTLS_SSL_MAX_FRAGMENT_LENGTH"
+    make test
+
+    msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH, MBEDTLS_MEMORY_BUFFER_ALLOC_C, MBEDTLS_MEMORY_DEBUG and MBEDTLS_SSL_MAX_FRAGMENT_LENGTH"
+    tests/ssl-opt.sh -f "Handshake memory usage"
+}
+
+component_test_when_no_ciphersuites_have_mac () {
+    msg "build: when no ciphersuites have MAC"
+    scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER
+    scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
+    scripts/config.py unset MBEDTLS_CMAC_C
+    make
+
+    msg "test: !MBEDTLS_SSL_SOME_SUITES_USE_MAC"
+    make test
+
+    msg "test ssl-opt.sh: !MBEDTLS_SSL_SOME_SUITES_USE_MAC"
+    tests/ssl-opt.sh -f 'Default\|EtM' -e 'without EtM'
+}
+
+component_test_no_date_time () {
+    msg "build: default config without MBEDTLS_HAVE_TIME_DATE"
+    scripts/config.py unset MBEDTLS_HAVE_TIME_DATE
+    cmake -D CMAKE_BUILD_TYPE:String=Check .
+    make
+
+    msg "test: !MBEDTLS_HAVE_TIME_DATE - main suites"
+    make test
+}
+
+component_test_platform_calloc_macro () {
+    msg "build: MBEDTLS_PLATFORM_{CALLOC/FREE}_MACRO enabled (ASan build)"
+    scripts/config.py set MBEDTLS_PLATFORM_MEMORY
+    scripts/config.py set MBEDTLS_PLATFORM_CALLOC_MACRO calloc
+    scripts/config.py set MBEDTLS_PLATFORM_FREE_MACRO   free
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: MBEDTLS_PLATFORM_{CALLOC/FREE}_MACRO enabled (ASan build)"
+    make test
+}
+
+component_test_malloc_0_null () {
+    msg "build: malloc(0) returns NULL (ASan+UBSan build)"
+    scripts/config.py full
+    make CC=$ASAN_CC CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"$PWD/tests/configs/user-config-malloc-0-null.h\"' $ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS"
+
+    msg "test: malloc(0) returns NULL (ASan+UBSan build)"
+    make test
+
+    msg "selftest: malloc(0) returns NULL (ASan+UBSan build)"
+    # Just the calloc selftest. "make test" ran the others as part of the
+    # test suites.
+    programs/test/selftest calloc
+
+    msg "test ssl-opt.sh: malloc(0) returns NULL (ASan+UBSan build)"
+    # Run a subset of the tests. The choice is a balance between coverage
+    # and time (including time indirectly wasted due to flaky tests).
+    # The current choice is to skip tests whose description includes
+    # "proxy", which is an approximation of skipping tests that use the
+    # UDP proxy, which tend to be slower and flakier.
+    tests/ssl-opt.sh -e 'proxy'
+}
+
+support_test_aesni () {
+    # Check that gcc targets x86_64 (we can build AESNI), and check for
+    # AESNI support on the host (we can run AESNI).
+    #
+    # The name of this function is possibly slightly misleading, but needs to align
+    # with the name of the corresponding test, component_test_aesni.
+    #
+    # In principle 32-bit x86 can support AESNI, but our implementation does not
+    # support 32-bit x86, so we check for x86-64.
+    # We can only grep /proc/cpuinfo on Linux, so this also checks for Linux
+    (gcc -v 2>&1 | grep Target | grep -q x86_64) &&
+        [[ "$HOSTTYPE" == "x86_64" && "$OSTYPE" == "linux-gnu" ]] &&
+        (lscpu | grep -qw aes)
+}
+
+component_test_aesni () { # ~ 60s
+    # This tests the two AESNI implementations (intrinsics and assembly), and also the plain C
+    # fallback. It also tests the logic that is used to select which implementation(s) to build.
+    #
+    # This test does not require the host to have support for AESNI (if it doesn't, the run-time
+    # AESNI detection will fallback to the plain C implementation, so the tests will instead
+    # exercise the plain C impl).
+
+    msg "build: default config with different AES implementations"
+    scripts/config.py set MBEDTLS_AESNI_C
+    scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
+    scripts/config.py set MBEDTLS_HAVE_ASM
+
+    # test the intrinsics implementation
+    msg "AES tests, test intrinsics"
+    make clean
+    make CC=gcc CFLAGS='-Werror -Wall -Wextra -mpclmul -msse2 -maes'
+    # check that we built intrinsics - this should be used by default when supported by the compiler
+    ./programs/test/selftest aes | grep "AESNI code" | grep -q "intrinsics"
+
+    # test the asm implementation
+    msg "AES tests, test assembly"
+    make clean
+    make CC=gcc CFLAGS='-Werror -Wall -Wextra -mno-pclmul -mno-sse2 -mno-aes'
+    # check that we built assembly - this should be built if the compiler does not support intrinsics
+    ./programs/test/selftest aes | grep "AESNI code" | grep -q "assembly"
+
+    # test the plain C implementation
+    scripts/config.py unset MBEDTLS_AESNI_C
+    scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
+    msg "AES tests, plain C"
+    make clean
+    make CC=gcc CFLAGS='-O2 -Werror'
+    # check that there is no AESNI code present
+    ./programs/test/selftest aes | not grep -q "AESNI code"
+    not grep -q "AES note: using AESNI" ./programs/test/selftest
+    grep -q "AES note: built-in implementation." ./programs/test/selftest
+
+    # test the intrinsics implementation
+    scripts/config.py set MBEDTLS_AESNI_C
+    scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY
+    msg "AES tests, test AESNI only"
+    make clean
+    make CC=gcc CFLAGS='-Werror -Wall -Wextra -mpclmul -msse2 -maes'
+    ./programs/test/selftest aes | grep -q "AES note: using AESNI"
+    ./programs/test/selftest aes | not grep -q "AES note: built-in implementation."
+    grep -q "AES note: using AESNI" ./programs/test/selftest
+    not grep -q "AES note: built-in implementation." ./programs/test/selftest
+}
+
+component_test_sha3_variations () {
+    msg "sha3 loop unroll variations"
+
+    # define minimal config sufficient to test SHA3
+    cat > include/mbedtls/mbedtls_config.h << END
+        #define MBEDTLS_SELF_TEST
+        #define MBEDTLS_SHA3_C
+END
+
+    msg "all loops unrolled"
+    make clean
+    make -C tests test_suite_shax CFLAGS="-DMBEDTLS_SHA3_THETA_UNROLL=1 -DMBEDTLS_SHA3_PI_UNROLL=1 -DMBEDTLS_SHA3_CHI_UNROLL=1 -DMBEDTLS_SHA3_RHO_UNROLL=1"
+    ./tests/test_suite_shax
+
+    msg "all loops rolled up"
+    make clean
+    make -C tests test_suite_shax CFLAGS="-DMBEDTLS_SHA3_THETA_UNROLL=0 -DMBEDTLS_SHA3_PI_UNROLL=0 -DMBEDTLS_SHA3_CHI_UNROLL=0 -DMBEDTLS_SHA3_RHO_UNROLL=0"
+    ./tests/test_suite_shax
+}
+
+support_test_aesni_m32 () {
+    support_test_m32_no_asm && (lscpu | grep -qw aes)
+}
+
+component_test_aesni_m32 () { # ~ 60s
+    # This tests are duplicated from component_test_aesni for i386 target
+    #
+    # AESNI intrinsic code supports i386 and assembly code does not support it.
+
+    msg "build: default config with different AES implementations"
+    scripts/config.py set MBEDTLS_AESNI_C
+    scripts/config.py set MBEDTLS_PADLOCK_C
+    scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
+    scripts/config.py set MBEDTLS_HAVE_ASM
+
+    # test the intrinsics implementation with gcc
+    msg "AES tests, test intrinsics (gcc)"
+    make clean
+    make CC=gcc CFLAGS='-m32 -Werror -Wall -Wextra' LDFLAGS='-m32'
+    # check that we built intrinsics - this should be used by default when supported by the compiler
+    ./programs/test/selftest aes | grep "AESNI code" | grep -q "intrinsics"
+    grep -q "AES note: using AESNI" ./programs/test/selftest
+    grep -q "AES note: built-in implementation." ./programs/test/selftest
+    grep -q "AES note: using VIA Padlock" ./programs/test/selftest
+    grep -q mbedtls_aesni_has_support ./programs/test/selftest
+
+    scripts/config.py set MBEDTLS_AESNI_C
+    scripts/config.py unset MBEDTLS_PADLOCK_C
+    scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY
+    msg "AES tests, test AESNI only"
+    make clean
+    make CC=gcc CFLAGS='-m32 -Werror -Wall -Wextra -mpclmul -msse2 -maes' LDFLAGS='-m32'
+    ./programs/test/selftest aes | grep -q "AES note: using AESNI"
+    ./programs/test/selftest aes | not grep -q "AES note: built-in implementation."
+    grep -q "AES note: using AESNI" ./programs/test/selftest
+    not grep -q "AES note: built-in implementation." ./programs/test/selftest
+    not grep -q "AES note: using VIA Padlock" ./programs/test/selftest
+    not grep -q mbedtls_aesni_has_support ./programs/test/selftest
+}
+
+support_test_aesni_m32_clang () {
+    # clang >= 4 is required to build with target attributes
+    support_test_aesni_m32 && [[ $(clang_version) -ge 4 ]]
+}
+
+component_test_aesni_m32_clang () {
+
+    scripts/config.py set MBEDTLS_AESNI_C
+    scripts/config.py set MBEDTLS_PADLOCK_C
+    scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
+    scripts/config.py set MBEDTLS_HAVE_ASM
+
+    # test the intrinsics implementation with clang
+    msg "AES tests, test intrinsics (clang)"
+    make clean
+    make CC=clang CFLAGS='-m32 -Werror -Wall -Wextra' LDFLAGS='-m32'
+    # check that we built intrinsics - this should be used by default when supported by the compiler
+    ./programs/test/selftest aes | grep "AESNI code" | grep -q "intrinsics"
+    grep -q "AES note: using AESNI" ./programs/test/selftest
+    grep -q "AES note: built-in implementation." ./programs/test/selftest
+    grep -q "AES note: using VIA Padlock" ./programs/test/selftest
+    grep -q mbedtls_aesni_has_support ./programs/test/selftest
+}
+
+# For timebeing, no aarch64 gcc available in CI and no arm64 CI node.
+component_build_aes_aesce_armcc () {
+    msg "Build: AESCE test on arm64 platform without plain C."
+    scripts/config.py baremetal
+
+    # armc[56] don't support SHA-512 intrinsics
+    scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT
+
+    # Stop armclang warning about feature detection for A64_CRYPTO.
+    # With this enabled, the library does build correctly under armclang,
+    # but in baremetal builds (as tested here), feature detection is
+    # unavailable, and the user is notified via a #warning. So enabling
+    # this feature would prevent us from building with -Werror on
+    # armclang. Tracked in #7198.
+    scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
+    scripts/config.py set MBEDTLS_HAVE_ASM
+
+    msg "AESCE, build with default configuration."
+    scripts/config.py set MBEDTLS_AESCE_C
+    scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
+    armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto"
+
+    msg "AESCE, build AESCE only"
+    scripts/config.py set MBEDTLS_AESCE_C
+    scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY
+    armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto"
+}
+
+support_build_aes_armce () {
+    # clang >= 11 is required to build with AES extensions
+    [[ $(clang_version) -ge 11 ]]
+}
+
+component_build_aes_armce () {
+    # Test variations of AES with Armv8 crypto extensions
+    scripts/config.py set MBEDTLS_AESCE_C
+    scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY
+
+    msg "MBEDTLS_AES_USE_HARDWARE_ONLY, clang, aarch64"
+    make -B library/aesce.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a+crypto"
+
+    msg "MBEDTLS_AES_USE_HARDWARE_ONLY, clang, arm"
+    make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm"
+
+    msg "MBEDTLS_AES_USE_HARDWARE_ONLY, clang, thumb"
+    make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb"
+
+    scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
+
+    msg "no MBEDTLS_AES_USE_HARDWARE_ONLY, clang, aarch64"
+    make -B library/aesce.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a+crypto"
+
+    msg "no MBEDTLS_AES_USE_HARDWARE_ONLY, clang, arm"
+    make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm"
+
+    msg "no MBEDTLS_AES_USE_HARDWARE_ONLY, clang, thumb"
+    make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb"
+
+    # test for presence of AES instructions
+    scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY
+    msg "clang, test A32 crypto instructions built"
+    make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -S"
+    grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.o
+    msg "clang, test T32 crypto instructions built"
+    make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb -S"
+    grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.o
+    msg "clang, test aarch64 crypto instructions built"
+    make -B library/aesce.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a -S"
+    grep -E 'aes[a-z]+\s*[qv]' library/aesce.o
+
+    # test for absence of AES instructions
+    scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
+    scripts/config.py unset MBEDTLS_AESCE_C
+    msg "clang, test A32 crypto instructions not built"
+    make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -S"
+    not grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.o
+    msg "clang, test T32 crypto instructions not built"
+    make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb -S"
+    not grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.o
+    msg "clang, test aarch64 crypto instructions not built"
+    make -B library/aesce.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a -S"
+    not grep -E 'aes[a-z]+\s*[qv]' library/aesce.o
+}
+
+support_build_sha_armce () {
+    # clang >= 4 is required to build with SHA extensions
+    [[ $(clang_version) -ge 4 ]]
+}
+
+component_build_sha_armce () {
+    scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
+
+
+    # Test variations of SHA256 Armv8 crypto extensions
+    scripts/config.py set MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY
+        msg "MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY clang, aarch64"
+        make -B library/sha256.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a"
+        msg "MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY clang, arm"
+        make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm"
+    scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY
+
+
+    # test the deprecated form of the config option
+    scripts/config.py set MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY
+        msg "MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY clang, thumb"
+        make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb"
+    scripts/config.py unset MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY
+
+    scripts/config.py set MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
+        msg "MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT clang, aarch64"
+        make -B library/sha256.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a"
+    scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
+
+
+    # test the deprecated form of the config option
+    scripts/config.py set MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT
+        msg "MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT clang, arm"
+        make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -std=c99"
+        msg "MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT clang, thumb"
+        make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb"
+    scripts/config.py unset MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT
+
+
+    # examine the disassembly for presence of SHA instructions
+    for opt in MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT; do
+        scripts/config.py set ${opt}
+            msg "${opt} clang, test A32 crypto instructions built"
+            make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -S"
+            grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.o
+
+            msg "${opt} clang, test T32 crypto instructions built"
+            make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb -S"
+            grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.o
+
+            msg "${opt} clang, test aarch64 crypto instructions built"
+            make -B library/sha256.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a -S"
+            grep -E 'sha256[a-z0-9]+\s+[qv]' library/sha256.o
+        scripts/config.py unset ${opt}
+    done
+
+
+    # examine the disassembly for absence of SHA instructions
+    msg "clang, test A32 crypto instructions not built"
+    make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -S"
+    not grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.o
+
+    msg "clang, test T32 crypto instructions not built"
+    make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb -S"
+    not grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.o
+
+    msg "clang, test aarch64 crypto instructions not built"
+    make -B library/sha256.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a -S"
+    not grep -E 'sha256[a-z0-9]+\s+[qv]' library/sha256.o
+}
+
+# For timebeing, no VIA Padlock platform available.
+component_build_aes_via_padlock () {
+
+    msg "AES:VIA PadLock, build with default configuration."
+    scripts/config.py unset MBEDTLS_AESNI_C
+    scripts/config.py set MBEDTLS_PADLOCK_C
+    scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY
+    make CC=gcc CFLAGS="$ASAN_CFLAGS -m32" LDFLAGS="-m32 $ASAN_CFLAGS"
+    grep -q mbedtls_padlock_has_support ./programs/test/selftest
+
+}
+
+support_build_aes_via_padlock_only () {
+    ( [ "$MBEDTLS_TEST_PLATFORM" == "Linux-x86_64" ] || \
+        [ "$MBEDTLS_TEST_PLATFORM" == "Linux-amd64" ] ) && \
+    [ "`dpkg --print-foreign-architectures`" == "i386" ]
+}
+
+support_build_aes_aesce_armcc () {
+    support_build_armcc
+}
+
+component_test_aes_only_128_bit_keys () {
+    msg "build: default config + AES_ONLY_128_BIT_KEY_LENGTH"
+    scripts/config.py set MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH
+    scripts/config.py unset MBEDTLS_PADLOCK_C
+
+    make CFLAGS='-O2 -Werror -Wall -Wextra'
+
+    msg "test: default config + AES_ONLY_128_BIT_KEY_LENGTH"
+    make test
+}
+
+component_test_no_ctr_drbg_aes_only_128_bit_keys () {
+    msg "build: default config + AES_ONLY_128_BIT_KEY_LENGTH - CTR_DRBG_C"
+    scripts/config.py set MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH
+    scripts/config.py unset MBEDTLS_CTR_DRBG_C
+    scripts/config.py unset MBEDTLS_PADLOCK_C
+
+    make CC=clang CFLAGS='-Werror -Wall -Wextra'
+
+    msg "test: default config + AES_ONLY_128_BIT_KEY_LENGTH - CTR_DRBG_C"
+    make test
+}
+
+component_test_aes_only_128_bit_keys_have_builtins () {
+    msg "build: default config + AES_ONLY_128_BIT_KEY_LENGTH - AESNI_C - AESCE_C"
+    scripts/config.py set MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH
+    scripts/config.py unset MBEDTLS_PADLOCK_C
+    scripts/config.py unset MBEDTLS_AESNI_C
+    scripts/config.py unset MBEDTLS_AESCE_C
+
+    make CFLAGS='-O2 -Werror -Wall -Wextra'
+
+    msg "test: default config + AES_ONLY_128_BIT_KEY_LENGTH - AESNI_C - AESCE_C"
+    make test
+
+    msg "selftest: default config + AES_ONLY_128_BIT_KEY_LENGTH - AESNI_C - AESCE_C"
+    programs/test/selftest
+}
+
+component_test_gcm_largetable () {
+    msg "build: default config + GCM_LARGE_TABLE - AESNI_C - AESCE_C"
+    scripts/config.py set MBEDTLS_GCM_LARGE_TABLE
+    scripts/config.py unset MBEDTLS_PADLOCK_C
+    scripts/config.py unset MBEDTLS_AESNI_C
+    scripts/config.py unset MBEDTLS_AESCE_C
+
+    make CFLAGS='-O2 -Werror -Wall -Wextra'
+
+    msg "test: default config - GCM_LARGE_TABLE - AESNI_C - AESCE_C"
+    make test
+}
+
+component_test_aes_fewer_tables () {
+    msg "build: default config with AES_FEWER_TABLES enabled"
+    scripts/config.py set MBEDTLS_AES_FEWER_TABLES
+    make CFLAGS='-O2 -Werror -Wall -Wextra'
+
+    msg "test: AES_FEWER_TABLES"
+    make test
+}
+
+component_test_aes_rom_tables () {
+    msg "build: default config with AES_ROM_TABLES enabled"
+    scripts/config.py set MBEDTLS_AES_ROM_TABLES
+    make CFLAGS='-O2 -Werror -Wall -Wextra'
+
+    msg "test: AES_ROM_TABLES"
+    make test
+}
+
+component_test_aes_fewer_tables_and_rom_tables () {
+    msg "build: default config with AES_ROM_TABLES and AES_FEWER_TABLES enabled"
+    scripts/config.py set MBEDTLS_AES_FEWER_TABLES
+    scripts/config.py set MBEDTLS_AES_ROM_TABLES
+    make CFLAGS='-O2 -Werror -Wall -Wextra'
+
+    msg "test: AES_FEWER_TABLES + AES_ROM_TABLES"
+    make test
+}
+
+# helper for common_block_cipher_no_decrypt() which:
+# - enable/disable the list of config options passed from -s/-u respectively.
+# - build
+# - test for tests_suite_xxx
+# - selftest
+#
+# Usage: helper_block_cipher_no_decrypt_build_test
+#        [-s set_opts] [-u unset_opts] [-c cflags] [-l ldflags] [option [...]]
+# Options:  -s set_opts     the list of config options to enable
+#           -u unset_opts   the list of config options to disable
+#           -c cflags       the list of options passed to CFLAGS
+#           -l ldflags      the list of options passed to LDFLAGS
+helper_block_cipher_no_decrypt_build_test () {
+    while [ $# -gt 0 ]; do
+        case "$1" in
+            -s)
+                shift; local set_opts="$1";;
+            -u)
+                shift; local unset_opts="$1";;
+            -c)
+                shift; local cflags="-Werror -Wall -Wextra $1";;
+            -l)
+                shift; local ldflags="$1";;
+        esac
+        shift
+    done
+    set_opts="${set_opts:-}"
+    unset_opts="${unset_opts:-}"
+    cflags="${cflags:-}"
+    ldflags="${ldflags:-}"
+
+    [ -n "$set_opts" ] && echo "Enabling: $set_opts" && scripts/config.py set-all $set_opts
+    [ -n "$unset_opts" ] && echo "Disabling: $unset_opts" && scripts/config.py unset-all $unset_opts
+
+    msg "build: default config + BLOCK_CIPHER_NO_DECRYPT${set_opts:+ + $set_opts}${unset_opts:+ - $unset_opts} with $cflags${ldflags:+, $ldflags}"
+    make clean
+    make CFLAGS="-O2 $cflags" LDFLAGS="$ldflags"
+
+    # Make sure we don't have mbedtls_xxx_setkey_dec in AES/ARIA/CAMELLIA
+    not grep mbedtls_aes_setkey_dec library/aes.o
+    not grep mbedtls_aria_setkey_dec library/aria.o
+    not grep mbedtls_camellia_setkey_dec library/camellia.o
+    # Make sure we don't have mbedtls_internal_aes_decrypt in AES
+    not grep mbedtls_internal_aes_decrypt library/aes.o
+    # Make sure we don't have mbedtls_aesni_inverse_key in AESNI
+    not grep mbedtls_aesni_inverse_key library/aesni.o
+
+    msg "test: default config + BLOCK_CIPHER_NO_DECRYPT${set_opts:+ + $set_opts}${unset_opts:+ - $unset_opts} with $cflags${ldflags:+, $ldflags}"
+    make test
+
+    msg "selftest: default config + BLOCK_CIPHER_NO_DECRYPT${set_opts:+ + $set_opts}${unset_opts:+ - $unset_opts} with $cflags${ldflags:+, $ldflags}"
+    programs/test/selftest
+}
+
+# This is a common configuration function used in:
+# - component_test_block_cipher_no_decrypt_aesni_legacy()
+# - component_test_block_cipher_no_decrypt_aesni_use_psa()
+# in order to test BLOCK_CIPHER_NO_DECRYPT with AESNI intrinsics,
+# AESNI assembly and AES C implementation on x86_64 and with AESNI intrinsics
+# on x86.
+common_block_cipher_no_decrypt () {
+    # test AESNI intrinsics
+    helper_block_cipher_no_decrypt_build_test \
+        -s "MBEDTLS_AESNI_C" \
+        -c "-mpclmul -msse2 -maes"
+
+    # test AESNI assembly
+    helper_block_cipher_no_decrypt_build_test \
+        -s "MBEDTLS_AESNI_C" \
+        -c "-mno-pclmul -mno-sse2 -mno-aes"
+
+    # test AES C implementation
+    helper_block_cipher_no_decrypt_build_test \
+        -u "MBEDTLS_AESNI_C"
+
+    # test AESNI intrinsics for i386 target
+    helper_block_cipher_no_decrypt_build_test \
+        -s "MBEDTLS_AESNI_C" \
+        -c "-m32 -mpclmul -msse2 -maes" \
+        -l "-m32"
+}
+
+# This is a configuration function used in component_test_block_cipher_no_decrypt_xxx:
+# usage: 0: no PSA crypto configuration
+#        1: use PSA crypto configuration
+config_block_cipher_no_decrypt () {
+    use_psa=$1
+
+    scripts/config.py set MBEDTLS_BLOCK_CIPHER_NO_DECRYPT
+    scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC
+    scripts/config.py unset MBEDTLS_CIPHER_MODE_XTS
+    scripts/config.py unset MBEDTLS_DES_C
+    scripts/config.py unset MBEDTLS_NIST_KW_C
+
+    if [ "$use_psa" -eq 1 ]; then
+        # Enable support for cryptographic mechanisms through the PSA API.
+        # Note: XTS, KW are not yet supported via the PSA API in Mbed TLS.
+        scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
+        scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_NO_PADDING
+        scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_PKCS7
+        scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_ECB_NO_PADDING
+        scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_DES
+    fi
+}
+
+component_test_block_cipher_no_decrypt_aesni () {
+    # This consistently causes an llvm crash on clang 3.8, so use gcc
+    export CC=gcc
+    config_block_cipher_no_decrypt 0
+    common_block_cipher_no_decrypt
+}
+
+component_test_block_cipher_no_decrypt_aesni_use_psa () {
+    # This consistently causes an llvm crash on clang 3.8, so use gcc
+    export CC=gcc
+    config_block_cipher_no_decrypt 1
+    common_block_cipher_no_decrypt
+}
+
+support_test_block_cipher_no_decrypt_aesce_armcc () {
+    support_build_armcc
+}
+
+component_test_block_cipher_no_decrypt_aesce_armcc () {
+    scripts/config.py baremetal
+
+    # armc[56] don't support SHA-512 intrinsics
+    scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT
+
+    # Stop armclang warning about feature detection for A64_CRYPTO.
+    # With this enabled, the library does build correctly under armclang,
+    # but in baremetal builds (as tested here), feature detection is
+    # unavailable, and the user is notified via a #warning. So enabling
+    # this feature would prevent us from building with -Werror on
+    # armclang. Tracked in #7198.
+    scripts/config.py unset MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT
+    scripts/config.py set MBEDTLS_HAVE_ASM
+
+    config_block_cipher_no_decrypt 1
+
+    # test AESCE baremetal build
+    scripts/config.py set MBEDTLS_AESCE_C
+    msg "build: default config + BLOCK_CIPHER_NO_DECRYPT with AESCE"
+    armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto -Werror -Wall -Wextra"
+
+    # Make sure we don't have mbedtls_xxx_setkey_dec in AES/ARIA/CAMELLIA
+    not grep mbedtls_aes_setkey_dec library/aes.o
+    not grep mbedtls_aria_setkey_dec library/aria.o
+    not grep mbedtls_camellia_setkey_dec library/camellia.o
+    # Make sure we don't have mbedtls_internal_aes_decrypt in AES
+    not grep mbedtls_internal_aes_decrypt library/aes.o
+    # Make sure we don't have mbedtls_aesce_inverse_key and aesce_decrypt_block in AESCE
+    not grep mbedtls_aesce_inverse_key library/aesce.o
+    not grep aesce_decrypt_block library/aesce.o
+}
+
+component_test_ctr_drbg_aes_256_sha_256 () {
+    msg "build: full + MBEDTLS_ENTROPY_FORCE_SHA256 (ASan build)"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_MEMORY_BUFFER_ALLOC_C
+    scripts/config.py set MBEDTLS_ENTROPY_FORCE_SHA256
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: full + MBEDTLS_ENTROPY_FORCE_SHA256 (ASan build)"
+    make test
+}
+
+component_test_ctr_drbg_aes_128_sha_512 () {
+    msg "build: full + MBEDTLS_CTR_DRBG_USE_128_BIT_KEY (ASan build)"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_MEMORY_BUFFER_ALLOC_C
+    scripts/config.py set MBEDTLS_CTR_DRBG_USE_128_BIT_KEY
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: full + MBEDTLS_CTR_DRBG_USE_128_BIT_KEY (ASan build)"
+    make test
+}
+
+component_test_ctr_drbg_aes_128_sha_256 () {
+    msg "build: full + MBEDTLS_CTR_DRBG_USE_128_BIT_KEY + MBEDTLS_ENTROPY_FORCE_SHA256 (ASan build)"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_MEMORY_BUFFER_ALLOC_C
+    scripts/config.py set MBEDTLS_CTR_DRBG_USE_128_BIT_KEY
+    scripts/config.py set MBEDTLS_ENTROPY_FORCE_SHA256
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: full + MBEDTLS_CTR_DRBG_USE_128_BIT_KEY + MBEDTLS_ENTROPY_FORCE_SHA256 (ASan build)"
+    make test
+}
+
+component_test_se_default () {
+    msg "build: default config + MBEDTLS_PSA_CRYPTO_SE_C"
+    scripts/config.py set MBEDTLS_PSA_CRYPTO_SE_C
+    make CC=clang CFLAGS="$ASAN_CFLAGS -Os" LDFLAGS="$ASAN_CFLAGS"
+
+    msg "test: default config + MBEDTLS_PSA_CRYPTO_SE_C"
+    make test
+}
+
+component_test_psa_crypto_drivers () {
+    msg "build: full + test drivers dispatching to builtins"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_PSA_CRYPTO_CONFIG
+    loc_cflags="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST_ALL"
+    loc_cflags="${loc_cflags} '-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/user-config-for-test.h\"'"
+    loc_cflags="${loc_cflags} -I../tests/include -O2"
+
+    make CC=$ASAN_CC CFLAGS="${loc_cflags}" LDFLAGS="$ASAN_CFLAGS"
+
+    msg "test: full + test drivers dispatching to builtins"
+    make test
+}
+
+component_test_make_shared () {
+    msg "build/test: make shared" # ~ 40s
+    make SHARED=1 all check
+    ldd programs/util/strerror | grep libmbedcrypto
+    programs/test/dlopen_demo.sh
+}
+
+component_test_cmake_shared () {
+    msg "build/test: cmake shared" # ~ 2min
+    cmake -DUSE_SHARED_MBEDTLS_LIBRARY=On .
+    make
+    ldd programs/util/strerror | grep libmbedcrypto
+    make test
+    programs/test/dlopen_demo.sh
+}
+
+test_build_opt () {
+    info=$1 cc=$2; shift 2
+    $cc --version
+    for opt in "$@"; do
+          msg "build/test: $cc $opt, $info" # ~ 30s
+          make CC="$cc" CFLAGS="$opt -std=c99 -pedantic -Wall -Wextra -Werror"
+          # We're confident enough in compilers to not run _all_ the tests,
+          # but at least run the unit tests. In particular, runs with
+          # optimizations use inline assembly whereas runs with -O0
+          # skip inline assembly.
+          make test # ~30s
+          make clean
+    done
+}
+
+# For FreeBSD we invoke the function by name so this condition is added
+# to disable the existing test_clang_opt function for linux.
+if [[ $(uname) != "Linux" ]]; then
+    component_test_clang_opt () {
+        scripts/config.py full
+        test_build_opt 'full config' clang -O0 -Os -O2
+    }
+fi
+
+component_test_clang_latest_opt () {
+    scripts/config.py full
+    test_build_opt 'full config' "$CLANG_LATEST" -O0 -Os -O2
+}
+support_test_clang_latest_opt () {
+    type "$CLANG_LATEST" >/dev/null 2>/dev/null
+}
+
+component_test_clang_earliest_opt () {
+    scripts/config.py full
+    test_build_opt 'full config' "$CLANG_EARLIEST" -O0
+}
+support_test_clang_earliest_opt () {
+    type "$CLANG_EARLIEST" >/dev/null 2>/dev/null
+}
+
+component_test_gcc_latest_opt () {
+    scripts/config.py full
+    test_build_opt 'full config' "$GCC_LATEST" -O0 -Os -O2
+}
+support_test_gcc_latest_opt () {
+    type "$GCC_LATEST" >/dev/null 2>/dev/null
+}
+
+component_test_gcc_earliest_opt () {
+    scripts/config.py full
+    test_build_opt 'full config' "$GCC_EARLIEST" -O0
+}
+support_test_gcc_earliest_opt () {
+    type "$GCC_EARLIEST" >/dev/null 2>/dev/null
+}
+
+component_build_mbedtls_config_file () {
+    msg "build: make with MBEDTLS_CONFIG_FILE" # ~40s
+    scripts/config.py -w full_config.h full
+    echo '#error "MBEDTLS_CONFIG_FILE is not working"' >"$CONFIG_H"
+    make CFLAGS="-I '$PWD' -DMBEDTLS_CONFIG_FILE='\"full_config.h\"'"
+    # Make sure this feature is enabled. We'll disable it in the next phase.
+    programs/test/query_compile_time_config MBEDTLS_NIST_KW_C
+    make clean
+
+    msg "build: make with MBEDTLS_CONFIG_FILE + MBEDTLS_USER_CONFIG_FILE"
+    # In the user config, disable one feature (for simplicity, pick a feature
+    # that nothing else depends on).
+    echo '#undef MBEDTLS_NIST_KW_C' >user_config.h
+    make CFLAGS="-I '$PWD' -DMBEDTLS_CONFIG_FILE='\"full_config.h\"' -DMBEDTLS_USER_CONFIG_FILE='\"user_config.h\"'"
+    not programs/test/query_compile_time_config MBEDTLS_NIST_KW_C
+
+    rm -f user_config.h full_config.h
+}
+
+component_build_psa_config_file () {
+    msg "build: make with MBEDTLS_PSA_CRYPTO_CONFIG_FILE" # ~40s
+    scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG
+    cp "$CRYPTO_CONFIG_H" psa_test_config.h
+    echo '#error "MBEDTLS_PSA_CRYPTO_CONFIG_FILE is not working"' >"$CRYPTO_CONFIG_H"
+    make CFLAGS="-I '$PWD' -DMBEDTLS_PSA_CRYPTO_CONFIG_FILE='\"psa_test_config.h\"'"
+    # Make sure this feature is enabled. We'll disable it in the next phase.
+    programs/test/query_compile_time_config MBEDTLS_CMAC_C
+    make clean
+
+    msg "build: make with MBEDTLS_PSA_CRYPTO_CONFIG_FILE + MBEDTLS_PSA_CRYPTO_USER_CONFIG_FILE" # ~40s
+    # In the user config, disable one feature and its dependencies, which will
+    # reflect on the mbedtls configuration so we can query it with
+    # query_compile_time_config.
+    echo '#undef PSA_WANT_ALG_CMAC' >psa_user_config.h
+    echo '#undef PSA_WANT_ALG_PBKDF2_AES_CMAC_PRF_128' >> psa_user_config.h
+    scripts/config.py unset MBEDTLS_CMAC_C
+    make CFLAGS="-I '$PWD' -DMBEDTLS_PSA_CRYPTO_CONFIG_FILE='\"psa_test_config.h\"' -DMBEDTLS_PSA_CRYPTO_USER_CONFIG_FILE='\"psa_user_config.h\"'"
+    not programs/test/query_compile_time_config MBEDTLS_CMAC_C
+
+    rm -f psa_test_config.h psa_user_config.h
+}
+
+component_build_psa_alt_headers () {
+    msg "build: make with PSA alt headers" # ~20s
+
+    # Generate alternative versions of the substitutable headers with the
+    # same content except different include guards.
+    make -C tests include/alt-extra/psa/crypto_platform_alt.h include/alt-extra/psa/crypto_struct_alt.h
+
+    # Build the library and some programs.
+    # Don't build the fuzzers to avoid having to go through hoops to set
+    # a correct include path for programs/fuzz/Makefile.
+    make CFLAGS="-I ../tests/include/alt-extra -DMBEDTLS_PSA_CRYPTO_PLATFORM_FILE='\"psa/crypto_platform_alt.h\"' -DMBEDTLS_PSA_CRYPTO_STRUCT_FILE='\"psa/crypto_struct_alt.h\"'" lib
+    make -C programs -o fuzz CFLAGS="-I ../tests/include/alt-extra -DMBEDTLS_PSA_CRYPTO_PLATFORM_FILE='\"psa/crypto_platform_alt.h\"' -DMBEDTLS_PSA_CRYPTO_STRUCT_FILE='\"psa/crypto_struct_alt.h\"'"
+
+    # Check that we're getting the alternative include guards and not the
+    # original include guards.
+    programs/test/query_included_headers | grep -x PSA_CRYPTO_PLATFORM_ALT_H
+    programs/test/query_included_headers | grep -x PSA_CRYPTO_STRUCT_ALT_H
+    programs/test/query_included_headers | not grep -x PSA_CRYPTO_PLATFORM_H
+    programs/test/query_included_headers | not grep -x PSA_CRYPTO_STRUCT_H
+}
+
+component_test_m32_no_asm () {
+    # Build without assembly, so as to use portable C code (in a 32-bit
+    # build) and not the i386-specific inline assembly.
+    #
+    # Note that we require gcc, because clang Asan builds fail to link for
+    # this target (cannot find libclang_rt.lsan-i386.a - this is a known clang issue).
+    msg "build: i386, make, gcc, no asm (ASan build)" # ~ 30s
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_HAVE_ASM
+    scripts/config.py unset MBEDTLS_PADLOCK_C
+    scripts/config.py unset MBEDTLS_AESNI_C # AESNI for 32-bit is tested in test_aesni_m32
+    make CC=gcc CFLAGS="$ASAN_CFLAGS -m32" LDFLAGS="-m32 $ASAN_CFLAGS"
+
+    msg "test: i386, make, gcc, no asm (ASan build)"
+    make test
+}
+support_test_m32_no_asm () {
+    case $(uname -m) in
+        amd64|x86_64) true;;
+        *) false;;
+    esac
+}
+
+component_test_m32_o2 () {
+    # Build with optimization, to use the i386 specific inline assembly
+    # and go faster for tests.
+    msg "build: i386, make, gcc -O2 (ASan build)" # ~ 30s
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_AESNI_C # AESNI for 32-bit is tested in test_aesni_m32
+    make CC=gcc CFLAGS="$ASAN_CFLAGS -m32" LDFLAGS="-m32 $ASAN_CFLAGS"
+
+    msg "test: i386, make, gcc -O2 (ASan build)"
+    make test
+
+    msg "test ssl-opt.sh, i386, make, gcc-O2"
+    tests/ssl-opt.sh
+}
+support_test_m32_o2 () {
+    support_test_m32_no_asm "$@"
+}
+
+component_test_m32_everest () {
+    msg "build: i386, Everest ECDH context (ASan build)" # ~ 6 min
+    scripts/config.py set MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED
+    scripts/config.py unset MBEDTLS_AESNI_C # AESNI for 32-bit is tested in test_aesni_m32
+    make CC=gcc CFLAGS="$ASAN_CFLAGS -m32" LDFLAGS="-m32 $ASAN_CFLAGS"
+
+    msg "test: i386, Everest ECDH context - main suites (inc. selftests) (ASan build)" # ~ 50s
+    make test
+
+    msg "test: i386, Everest ECDH context - ECDH-related part of ssl-opt.sh (ASan build)" # ~ 5s
+    tests/ssl-opt.sh -f ECDH
+
+    msg "test: i386, Everest ECDH context - compat.sh with some ECDH ciphersuites (ASan build)" # ~ 3 min
+    # Exclude some symmetric ciphers that are redundant here to gain time.
+    tests/compat.sh -f ECDH -V NO -e 'ARIA\|CAMELLIA\|CHACHA'
+}
+support_test_m32_everest () {
+    support_test_m32_no_asm "$@"
+}
+
+component_test_mx32 () {
+    msg "build: 64-bit ILP32, make, gcc" # ~ 30s
+    scripts/config.py full
+    make CC=gcc CFLAGS='-O2 -Werror -Wall -Wextra -mx32' LDFLAGS='-mx32'
+
+    msg "test: 64-bit ILP32, make, gcc"
+    make test
+}
+support_test_mx32 () {
+    case $(uname -m) in
+        amd64|x86_64) true;;
+        *) false;;
+    esac
+}
+
+component_test_min_mpi_window_size () {
+    msg "build: Default + MBEDTLS_MPI_WINDOW_SIZE=1 (ASan build)" # ~ 10s
+    scripts/config.py set MBEDTLS_MPI_WINDOW_SIZE 1
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: MBEDTLS_MPI_WINDOW_SIZE=1 - main suites (inc. selftests) (ASan build)" # ~ 10s
+    make test
+}
+
+component_test_have_int32 () {
+    msg "build: gcc, force 32-bit bignum limbs"
+    scripts/config.py unset MBEDTLS_HAVE_ASM
+    scripts/config.py unset MBEDTLS_AESNI_C
+    scripts/config.py unset MBEDTLS_PADLOCK_C
+    scripts/config.py unset MBEDTLS_AESCE_C
+    make CC=gcc CFLAGS='-O2 -Werror -Wall -Wextra -DMBEDTLS_HAVE_INT32'
+
+    msg "test: gcc, force 32-bit bignum limbs"
+    make test
+}
+
+component_test_have_int64 () {
+    msg "build: gcc, force 64-bit bignum limbs"
+    scripts/config.py unset MBEDTLS_HAVE_ASM
+    scripts/config.py unset MBEDTLS_AESNI_C
+    scripts/config.py unset MBEDTLS_PADLOCK_C
+    scripts/config.py unset MBEDTLS_AESCE_C
+    make CC=gcc CFLAGS='-O2 -Werror -Wall -Wextra -DMBEDTLS_HAVE_INT64'
+
+    msg "test: gcc, force 64-bit bignum limbs"
+    make test
+}
+
+component_test_have_int32_cmake_new_bignum () {
+    msg "build: gcc, force 32-bit bignum limbs, new bignum interface, test hooks (ASan build)"
+    scripts/config.py unset MBEDTLS_HAVE_ASM
+    scripts/config.py unset MBEDTLS_AESNI_C
+    scripts/config.py unset MBEDTLS_PADLOCK_C
+    scripts/config.py unset MBEDTLS_AESCE_C
+    scripts/config.py set MBEDTLS_TEST_HOOKS
+    scripts/config.py set MBEDTLS_ECP_WITH_MPI_UINT
+    make CC=gcc CFLAGS="$ASAN_CFLAGS -Werror -Wall -Wextra -DMBEDTLS_HAVE_INT32" LDFLAGS="$ASAN_CFLAGS"
+
+    msg "test: gcc, force 32-bit bignum limbs, new bignum interface, test hooks (ASan build)"
+    make test
+}
+
+component_test_no_udbl_division () {
+    msg "build: MBEDTLS_NO_UDBL_DIVISION native" # ~ 10s
+    scripts/config.py full
+    scripts/config.py set MBEDTLS_NO_UDBL_DIVISION
+    make CFLAGS='-Werror -O1'
+
+    msg "test: MBEDTLS_NO_UDBL_DIVISION native" # ~ 10s
+    make test
+}
+
+component_test_no_64bit_multiplication () {
+    msg "build: MBEDTLS_NO_64BIT_MULTIPLICATION native" # ~ 10s
+    scripts/config.py full
+    scripts/config.py set MBEDTLS_NO_64BIT_MULTIPLICATION
+    make CFLAGS='-Werror -O1'
+
+    msg "test: MBEDTLS_NO_64BIT_MULTIPLICATION native" # ~ 10s
+    make test
+}
+
+component_test_no_strings () {
+    msg "build: no strings" # ~10s
+    scripts/config.py full
+    # Disable options that activate a large amount of string constants.
+    scripts/config.py unset MBEDTLS_DEBUG_C
+    scripts/config.py unset MBEDTLS_ERROR_C
+    scripts/config.py set MBEDTLS_ERROR_STRERROR_DUMMY
+    scripts/config.py unset MBEDTLS_VERSION_FEATURES
+    make CFLAGS='-Werror -Os'
+
+    msg "test: no strings" # ~ 10s
+    make test
+}
+
+component_test_no_x509_info () {
+    msg "build: full + MBEDTLS_X509_REMOVE_INFO" # ~ 10s
+    scripts/config.pl full
+    scripts/config.pl unset MBEDTLS_MEMORY_BACKTRACE # too slow for tests
+    scripts/config.pl set MBEDTLS_X509_REMOVE_INFO
+    make CFLAGS='-Werror -O2'
+
+    msg "test: full + MBEDTLS_X509_REMOVE_INFO" # ~ 10s
+    make test
+
+    msg "test: ssl-opt.sh, full + MBEDTLS_X509_REMOVE_INFO" # ~ 1 min
+    tests/ssl-opt.sh
+}
+
+component_build_arm_none_eabi_gcc () {
+    msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -O1, baremetal+debug" # ~ 10s
+    scripts/config.py baremetal
+    make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-std=c99 -Werror -Wall -Wextra -O1' lib
+
+    msg "size: ${ARM_NONE_EABI_GCC_PREFIX}gcc -O1, baremetal+debug"
+    ${ARM_NONE_EABI_GCC_PREFIX}size -t library/*.o
+}
+
+component_build_arm_linux_gnueabi_gcc_arm5vte () {
+    msg "build: ${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc -march=arm5vte, baremetal+debug" # ~ 10s
+    scripts/config.py baremetal
+    # Build for a target platform that's close to what Debian uses
+    # for its "armel" distribution (https://wiki.debian.org/ArmEabiPort).
+    # See https://github.com/Mbed-TLS/mbedtls/pull/2169 and comments.
+    # Build everything including programs, see for example
+    # https://github.com/Mbed-TLS/mbedtls/pull/3449#issuecomment-675313720
+    make CC="${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc" AR="${ARM_LINUX_GNUEABI_GCC_PREFIX}ar" CFLAGS='-Werror -Wall -Wextra -march=armv5te -O1' LDFLAGS='-march=armv5te'
+
+    msg "size: ${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc -march=armv5te -O1, baremetal+debug"
+    ${ARM_LINUX_GNUEABI_GCC_PREFIX}size -t library/*.o
+}
+support_build_arm_linux_gnueabi_gcc_arm5vte () {
+    type ${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc >/dev/null 2>&1
+}
+
+component_build_arm_none_eabi_gcc_arm5vte () {
+    msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -march=arm5vte, baremetal+debug" # ~ 10s
+    scripts/config.py baremetal
+    # This is an imperfect substitute for
+    # component_build_arm_linux_gnueabi_gcc_arm5vte
+    # in case the gcc-arm-linux-gnueabi toolchain is not available
+    make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" CFLAGS='-std=c99 -Werror -Wall -Wextra -march=armv5te -O1' LDFLAGS='-march=armv5te' SHELL='sh -x' lib
+
+    msg "size: ${ARM_NONE_EABI_GCC_PREFIX}gcc -march=armv5te -O1, baremetal+debug"
+    ${ARM_NONE_EABI_GCC_PREFIX}size -t library/*.o
+}
+
+component_build_arm_none_eabi_gcc_m0plus () {
+    msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -mthumb -mcpu=cortex-m0plus, baremetal_size" # ~ 10s
+    scripts/config.py baremetal_size
+    make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-std=c99 -Werror -Wall -Wextra -mthumb -mcpu=cortex-m0plus -Os' lib
+
+    msg "size: ${ARM_NONE_EABI_GCC_PREFIX}gcc -mthumb -mcpu=cortex-m0plus -Os, baremetal_size"
+    ${ARM_NONE_EABI_GCC_PREFIX}size -t library/*.o
+    for lib in library/*.a; do
+        echo "$lib:"
+        ${ARM_NONE_EABI_GCC_PREFIX}size -t $lib | grep TOTALS
+    done
+}
+
+component_build_arm_none_eabi_gcc_no_udbl_division () {
+    msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -DMBEDTLS_NO_UDBL_DIVISION, make" # ~ 10s
+    scripts/config.py baremetal
+    scripts/config.py set MBEDTLS_NO_UDBL_DIVISION
+    make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-std=c99 -Werror -Wall -Wextra' lib
+    echo "Checking that software 64-bit division is not required"
+    not grep __aeabi_uldiv library/*.o
+}
+
+component_build_arm_none_eabi_gcc_no_64bit_multiplication () {
+    msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc MBEDTLS_NO_64BIT_MULTIPLICATION, make" # ~ 10s
+    scripts/config.py baremetal
+    scripts/config.py set MBEDTLS_NO_64BIT_MULTIPLICATION
+    make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-std=c99 -Werror -O1 -march=armv6-m -mthumb' lib
+    echo "Checking that software 64-bit multiplication is not required"
+    not grep __aeabi_lmul library/*.o
+}
+
+component_build_arm_clang_thumb () {
+    # ~ 30s
+
+    scripts/config.py baremetal
+
+    msg "build: clang thumb 2, make"
+    make clean
+    make CC="clang" CFLAGS='-std=c99 -Werror -Os --target=arm-linux-gnueabihf -march=armv7-m -mthumb' lib
+
+    # Some Thumb 1 asm is sensitive to optimisation level, so test both -O0 and -Os
+    msg "build: clang thumb 1 -O0, make"
+    make clean
+    make CC="clang" CFLAGS='-std=c99 -Werror -O0 --target=arm-linux-gnueabihf -mcpu=arm1136j-s -mthumb' lib
+
+    msg "build: clang thumb 1 -Os, make"
+    make clean
+    make CC="clang" CFLAGS='-std=c99 -Werror -Os --target=arm-linux-gnueabihf -mcpu=arm1136j-s -mthumb' lib
+}
+
+component_build_armcc () {
+    msg "build: ARM Compiler 5"
+    scripts/config.py baremetal
+    # armc[56] don't support SHA-512 intrinsics
+    scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT
+
+    # older versions of armcc/armclang don't support AESCE_C on 32-bit Arm
+    scripts/config.py unset MBEDTLS_AESCE_C
+
+    # Stop armclang warning about feature detection for A64_CRYPTO.
+    # With this enabled, the library does build correctly under armclang,
+    # but in baremetal builds (as tested here), feature detection is
+    # unavailable, and the user is notified via a #warning. So enabling
+    # this feature would prevent us from building with -Werror on
+    # armclang. Tracked in #7198.
+    scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT
+
+    scripts/config.py set MBEDTLS_HAVE_ASM
+
+    make CC="$ARMC5_CC" AR="$ARMC5_AR" WARNING_CFLAGS='--strict --c99' lib
+
+    msg "size: ARM Compiler 5"
+    "$ARMC5_FROMELF" -z library/*.o
+
+    # Compile mostly with -O1 since some Arm inline assembly is disabled for -O0.
+
+    # ARM Compiler 6 - Target ARMv7-A
+    armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-a"
+
+    # ARM Compiler 6 - Target ARMv7-M
+    armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-m"
+
+    # ARM Compiler 6 - Target ARMv7-M+DSP
+    armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-m+dsp"
+
+    # ARM Compiler 6 - Target ARMv8-A - AArch32
+    armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv8.2-a"
+
+    # ARM Compiler 6 - Target ARMv8-M
+    armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv8-m.main"
+
+    # ARM Compiler 6 - Target Cortex-M0 - no optimisation
+    armc6_build_test "-O0 --target=arm-arm-none-eabi -mcpu=cortex-m0"
+
+    # ARM Compiler 6 - Target Cortex-M0
+    armc6_build_test "-Os --target=arm-arm-none-eabi -mcpu=cortex-m0"
+
+    # ARM Compiler 6 - Target ARMv8.2-A - AArch64
+    #
+    # Re-enable MBEDTLS_AESCE_C as this should be supported by the version of armclang
+    # that we have in our CI
+    scripts/config.py set MBEDTLS_AESCE_C
+    armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8.2-a+crypto"
+}
+
+support_build_armcc () {
+    armc5_cc="$ARMC5_BIN_DIR/armcc"
+    armc6_cc="$ARMC6_BIN_DIR/armclang"
+    (check_tools "$armc5_cc" "$armc6_cc" > /dev/null 2>&1)
+}
+
+component_test_tls12_only () {
+    msg "build: default config without MBEDTLS_SSL_PROTO_TLS1_3, cmake, gcc, ASan"
+    scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3
+    CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+
+    msg "test: main suites (inc. selftests) (ASan build)"
+    make test
+
+    msg "test: ssl-opt.sh (ASan build)"
+    tests/ssl-opt.sh
+
+    msg "test: compat.sh (ASan build)"
+    tests/compat.sh
+}
+
+component_test_tls13_only () {
+    msg "build: default config without MBEDTLS_SSL_PROTO_TLS1_2"
+    scripts/config.py set MBEDTLS_SSL_EARLY_DATA
+    scripts/config.py set MBEDTLS_SSL_RECORD_SIZE_LIMIT
+    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
+
+    msg "test: TLS 1.3 only, all key exchange modes enabled"
+    make test
+
+    msg "ssl-opt.sh: TLS 1.3 only, all key exchange modes enabled"
+    tests/ssl-opt.sh
+}
+
+component_test_tls13_only_psk () {
+    msg "build: TLS 1.3 only from default, only PSK key exchange mode"
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
+    scripts/config.py unset MBEDTLS_ECDH_C
+    scripts/config.py unset MBEDTLS_DHM_C
+    scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
+    scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
+    scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
+    scripts/config.py unset MBEDTLS_ECDSA_C
+    scripts/config.py unset MBEDTLS_PKCS1_V21
+    scripts/config.py unset MBEDTLS_PKCS7_C
+    scripts/config.py set   MBEDTLS_SSL_EARLY_DATA
+    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
+
+    msg "test_suite_ssl: TLS 1.3 only, only PSK key exchange mode enabled"
+    cd tests; ./test_suite_ssl; cd ..
+
+    msg "ssl-opt.sh: TLS 1.3 only, only PSK key exchange mode enabled"
+    tests/ssl-opt.sh
+}
+
+component_test_tls13_only_ephemeral () {
+    msg "build: TLS 1.3 only from default, only ephemeral key exchange mode"
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
+    scripts/config.py unset MBEDTLS_SSL_EARLY_DATA
+    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
+
+    msg "test_suite_ssl: TLS 1.3 only, only ephemeral key exchange mode"
+    cd tests; ./test_suite_ssl; cd ..
+
+    msg "ssl-opt.sh: TLS 1.3 only, only ephemeral key exchange mode"
+    tests/ssl-opt.sh
+}
+
+component_test_tls13_only_ephemeral_ffdh () {
+    msg "build: TLS 1.3 only from default, only ephemeral ffdh key exchange mode"
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
+    scripts/config.py unset MBEDTLS_SSL_EARLY_DATA
+    scripts/config.py unset MBEDTLS_ECDH_C
+
+    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
+
+    msg "test_suite_ssl: TLS 1.3 only, only ephemeral ffdh key exchange mode"
+    cd tests; ./test_suite_ssl; cd ..
+
+    msg "ssl-opt.sh: TLS 1.3 only, only ephemeral ffdh key exchange mode"
+    tests/ssl-opt.sh
+}
+
+component_test_tls13_only_psk_ephemeral () {
+    msg "build: TLS 1.3 only from default, only PSK ephemeral key exchange mode"
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
+    scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
+    scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
+    scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
+    scripts/config.py unset MBEDTLS_ECDSA_C
+    scripts/config.py unset MBEDTLS_PKCS1_V21
+    scripts/config.py unset MBEDTLS_PKCS7_C
+    scripts/config.py set   MBEDTLS_SSL_EARLY_DATA
+    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
+
+    msg "test_suite_ssl: TLS 1.3 only, only PSK ephemeral key exchange mode"
+    cd tests; ./test_suite_ssl; cd ..
+
+    msg "ssl-opt.sh: TLS 1.3 only, only PSK ephemeral key exchange mode"
+    tests/ssl-opt.sh
+}
+
+component_test_tls13_only_psk_ephemeral_ffdh () {
+    msg "build: TLS 1.3 only from default, only PSK ephemeral ffdh key exchange mode"
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
+    scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
+    scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
+    scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
+    scripts/config.py unset MBEDTLS_ECDSA_C
+    scripts/config.py unset MBEDTLS_PKCS1_V21
+    scripts/config.py unset MBEDTLS_PKCS7_C
+    scripts/config.py set   MBEDTLS_SSL_EARLY_DATA
+    scripts/config.py unset MBEDTLS_ECDH_C
+    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
+
+    msg "test_suite_ssl: TLS 1.3 only, only PSK ephemeral ffdh key exchange mode"
+    cd tests; ./test_suite_ssl; cd ..
+
+    msg "ssl-opt.sh: TLS 1.3 only, only PSK ephemeral ffdh key exchange mode"
+    tests/ssl-opt.sh
+}
+
+component_test_tls13_only_psk_all () {
+    msg "build: TLS 1.3 only from default, without ephemeral key exchange mode"
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
+    scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C
+    scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT
+    scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION
+    scripts/config.py unset MBEDTLS_ECDSA_C
+    scripts/config.py unset MBEDTLS_PKCS1_V21
+    scripts/config.py unset MBEDTLS_PKCS7_C
+    scripts/config.py set   MBEDTLS_SSL_EARLY_DATA
+    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
+
+    msg "test_suite_ssl: TLS 1.3 only, PSK and PSK ephemeral key exchange modes"
+    cd tests; ./test_suite_ssl; cd ..
+
+    msg "ssl-opt.sh: TLS 1.3 only, PSK and PSK ephemeral key exchange modes"
+    tests/ssl-opt.sh
+}
+
+component_test_tls13_only_ephemeral_all () {
+    msg "build: TLS 1.3 only from default, without PSK key exchange mode"
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
+    scripts/config.py set   MBEDTLS_SSL_EARLY_DATA
+    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'"
+
+    msg "test_suite_ssl: TLS 1.3 only, ephemeral and PSK ephemeral key exchange modes"
+    cd tests; ./test_suite_ssl; cd ..
+
+    msg "ssl-opt.sh: TLS 1.3 only, ephemeral and PSK ephemeral key exchange modes"
+    tests/ssl-opt.sh
+}
+
+component_test_tls13_no_padding () {
+    msg "build: default config plus early data minus padding"
+    scripts/config.py set MBEDTLS_SSL_CID_TLS1_3_PADDING_GRANULARITY 1
+    scripts/config.py set MBEDTLS_SSL_EARLY_DATA
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+    msg "test: default config plus early data minus padding"
+    make test
+    msg "ssl-opt.sh (TLS 1.3 no padding)"
+    tests/ssl-opt.sh
+}
+
+component_test_tls13_no_compatibility_mode () {
+    msg "build: default config plus early data minus middlebox compatibility mode"
+    scripts/config.py unset MBEDTLS_SSL_TLS1_3_COMPATIBILITY_MODE
+    scripts/config.py set   MBEDTLS_SSL_EARLY_DATA
+    CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+    msg "test: default config plus early data minus middlebox compatibility mode"
+    make test
+    msg "ssl-opt.sh (TLS 1.3 no compatibility mode)"
+    tests/ssl-opt.sh
+}
+
+component_test_full_minus_session_tickets () {
+    msg "build: full config without session tickets"
+    scripts/config.py full
+    scripts/config.py unset MBEDTLS_SSL_SESSION_TICKETS
+    scripts/config.py unset MBEDTLS_SSL_EARLY_DATA
+    CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan .
+    make
+    msg "test: full config without session tickets"
+    make test
+    msg "ssl-opt.sh (full config without session tickets)"
+    tests/ssl-opt.sh
+}
+
+component_build_mingw () {
+    msg "build: Windows cross build - mingw64, make (Link Library)" # ~ 30s
+    make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -Wall -Wextra -maes -msse2 -mpclmul' WINDOWS_BUILD=1 lib programs
+
+    # note Make tests only builds the tests, but doesn't run them
+    make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -maes -msse2 -mpclmul' WINDOWS_BUILD=1 tests
+    make WINDOWS_BUILD=1 clean
+
+    msg "build: Windows cross build - mingw64, make (DLL)" # ~ 30s
+    make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -Wall -Wextra -maes -msse2 -mpclmul' WINDOWS_BUILD=1 SHARED=1 lib programs
+    make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -Wall -Wextra -maes -msse2 -mpclmul' WINDOWS_BUILD=1 SHARED=1 tests
+    make WINDOWS_BUILD=1 clean
+
+    msg "build: Windows cross build - mingw64, make (Library only, default config without MBEDTLS_AESNI_C)" # ~ 30s
+    ./scripts/config.py unset MBEDTLS_AESNI_C #
+    make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -Wall -Wextra' WINDOWS_BUILD=1 lib
+    make WINDOWS_BUILD=1 clean
+}
+support_build_mingw () {
+    case $(i686-w64-mingw32-gcc -dumpversion 2>/dev/null) in
+        [0-5]*|"") false;;
+        *) true;;
+    esac
+}
+
+component_test_memsan () {
+    msg "build: MSan (clang)" # ~ 1 min 20s
+    scripts/config.py unset MBEDTLS_AESNI_C # memsan doesn't grok asm
+    CC=clang cmake -D CMAKE_BUILD_TYPE:String=MemSan .
+    make
+
+    msg "test: main suites (MSan)" # ~ 10s
+    make test
+
+    msg "test: metatests (MSan)"
+    tests/scripts/run-metatests.sh any msan
+
+    msg "program demos (MSan)" # ~20s
+    tests/scripts/run_demos.py
+
+    msg "test: ssl-opt.sh (MSan)" # ~ 1 min
+    tests/ssl-opt.sh
+
+    # Optional part(s)
+
+    if [ "$MEMORY" -gt 0 ]; then
+        msg "test: compat.sh (MSan)" # ~ 6 min 20s
+        tests/compat.sh
+    fi
+}
+
+component_release_test_valgrind () {
+    msg "build: Release (clang)"
+    # default config, in particular without MBEDTLS_USE_PSA_CRYPTO
+    CC=clang cmake -D CMAKE_BUILD_TYPE:String=Release .
+    make
+
+    msg "test: main suites, Valgrind (default config)"
+    make memcheck
+
+    # Optional parts (slow; currently broken on OS X because programs don't
+    # seem to receive signals under valgrind on OS X).
+    # These optional parts don't run on the CI.
+    if [ "$MEMORY" -gt 0 ]; then
+        msg "test: ssl-opt.sh --memcheck (default config)"
+        tests/ssl-opt.sh --memcheck
+    fi
+
+    if [ "$MEMORY" -gt 1 ]; then
+        msg "test: compat.sh --memcheck (default config)"
+        tests/compat.sh --memcheck
+    fi
+
+    if [ "$MEMORY" -gt 0 ]; then
+        msg "test: context-info.sh --memcheck (default config)"
+        tests/context-info.sh --memcheck
+    fi
+}
+
+component_release_test_valgrind_psa () {
+    msg "build: Release, full (clang)"
+    # full config, in particular with MBEDTLS_USE_PSA_CRYPTO
+    scripts/config.py full
+    CC=clang cmake -D CMAKE_BUILD_TYPE:String=Release .
+    make
+
+    msg "test: main suites, Valgrind (full config)"
+    make memcheck
+}
+
+support_test_cmake_out_of_source () {
+    distrib_id=""
+    distrib_ver=""
+    distrib_ver_minor=""
+    distrib_ver_major=""
+
+    # Attempt to parse lsb-release to find out distribution and version. If not
+    # found this should fail safe (test is supported).
+    if [[ -f /etc/lsb-release ]]; then
+
+        while read -r lsb_line; do
+            case "$lsb_line" in
+                "DISTRIB_ID"*) distrib_id=${lsb_line/#DISTRIB_ID=};;
+                "DISTRIB_RELEASE"*) distrib_ver=${lsb_line/#DISTRIB_RELEASE=};;
+            esac
+        done < /etc/lsb-release
+
+        distrib_ver_major="${distrib_ver%%.*}"
+        distrib_ver="${distrib_ver#*.}"
+        distrib_ver_minor="${distrib_ver%%.*}"
+    fi
+
+    # Running the out of source CMake test on Ubuntu 16.04 using more than one
+    # processor (as the CI does) can create a race condition whereby the build
+    # fails to see a generated file, despite that file actually having been
+    # generated. This problem appears to go away with 18.04 or newer, so make
+    # the out of source tests unsupported on Ubuntu 16.04.
+    [ "$distrib_id" != "Ubuntu" ] || [ "$distrib_ver_major" -gt 16 ]
+}
+
+component_test_cmake_out_of_source () {
+    # Remove existing generated files so that we use the ones cmake
+    # generates
+    make neat
+
+    msg "build: cmake 'out-of-source' build"
+    MBEDTLS_ROOT_DIR="$PWD"
+    mkdir "$OUT_OF_SOURCE_DIR"
+    cd "$OUT_OF_SOURCE_DIR"
+    # Note: Explicitly generate files as these are turned off in releases
+    cmake -D CMAKE_BUILD_TYPE:String=Check -D GEN_FILES=ON "$MBEDTLS_ROOT_DIR"
+    make
+
+    msg "test: cmake 'out-of-source' build"
+    make test
+    # Check that ssl-opt.sh can find the test programs.
+    # Also ensure that there are no error messages such as
+    # "No such file or directory", which would indicate that some required
+    # file is missing (ssl-opt.sh tolerates the absence of some files so
+    # may exit with status 0 but emit errors).
+    ./tests/ssl-opt.sh -f 'Default' >ssl-opt.out 2>ssl-opt.err
+    grep PASS ssl-opt.out
+    cat ssl-opt.err >&2
+    # If ssl-opt.err is non-empty, record an error and keep going.
+    [ ! -s ssl-opt.err ]
+    rm ssl-opt.out ssl-opt.err
+    cd "$MBEDTLS_ROOT_DIR"
+    rm -rf "$OUT_OF_SOURCE_DIR"
+}
+
+component_test_cmake_as_subdirectory () {
+    # Remove existing generated files so that we use the ones CMake
+    # generates
+    make neat
+
+    msg "build: cmake 'as-subdirectory' build"
+    cd programs/test/cmake_subproject
+    # Note: Explicitly generate files as these are turned off in releases
+    cmake -D GEN_FILES=ON .
+    make
+    ./cmake_subproject
+}
+support_test_cmake_as_subdirectory () {
+    support_test_cmake_out_of_source
+}
+
+component_test_cmake_as_package () {
+    # Remove existing generated files so that we use the ones CMake
+    # generates
+    make neat
+
+    msg "build: cmake 'as-package' build"
+    cd programs/test/cmake_package
+    cmake .
+    make
+    ./cmake_package
+}
+support_test_cmake_as_package () {
+    support_test_cmake_out_of_source
+}
+
+component_test_cmake_as_package_install () {
+    # Remove existing generated files so that we use the ones CMake
+    # generates
+    make neat
+
+    msg "build: cmake 'as-installed-package' build"
+    cd programs/test/cmake_package_install
+    cmake .
+    make
+    ./cmake_package_install
+}
+support_test_cmake_as_package_install () {
+    support_test_cmake_out_of_source
+}
+
+component_build_cmake_custom_config_file () {
+    # Make a copy of config file to use for the in-tree test
+    cp "$CONFIG_H" include/mbedtls_config_in_tree_copy.h
+
+    MBEDTLS_ROOT_DIR="$PWD"
+    mkdir "$OUT_OF_SOURCE_DIR"
+    cd "$OUT_OF_SOURCE_DIR"
+
+    # Build once to get the generated files (which need an intact config file)
+    cmake "$MBEDTLS_ROOT_DIR"
+    make
+
+    msg "build: cmake with -DMBEDTLS_CONFIG_FILE"
+    scripts/config.py -w full_config.h full
+    echo '#error "cmake -DMBEDTLS_CONFIG_FILE is not working."' > "$MBEDTLS_ROOT_DIR/$CONFIG_H"
+    cmake -DGEN_FILES=OFF -DMBEDTLS_CONFIG_FILE=full_config.h "$MBEDTLS_ROOT_DIR"
+    make
+
+    msg "build: cmake with -DMBEDTLS_CONFIG_FILE + -DMBEDTLS_USER_CONFIG_FILE"
+    # In the user config, disable one feature (for simplicity, pick a feature
+    # that nothing else depends on).
+    echo '#undef MBEDTLS_NIST_KW_C' >user_config.h
+
+    cmake -DGEN_FILES=OFF -DMBEDTLS_CONFIG_FILE=full_config.h -DMBEDTLS_USER_CONFIG_FILE=user_config.h "$MBEDTLS_ROOT_DIR"
+    make
+    not programs/test/query_compile_time_config MBEDTLS_NIST_KW_C
+
+    rm -f user_config.h full_config.h
+
+    cd "$MBEDTLS_ROOT_DIR"
+    rm -rf "$OUT_OF_SOURCE_DIR"
+
+    # Now repeat the test for an in-tree build:
+
+    # Restore config for the in-tree test
+    mv include/mbedtls_config_in_tree_copy.h "$CONFIG_H"
+
+    # Build once to get the generated files (which need an intact config)
+    cmake .
+    make
+
+    msg "build: cmake (in-tree) with -DMBEDTLS_CONFIG_FILE"
+    scripts/config.py -w full_config.h full
+    echo '#error "cmake -DMBEDTLS_CONFIG_FILE is not working."' > "$MBEDTLS_ROOT_DIR/$CONFIG_H"
+    cmake -DGEN_FILES=OFF -DMBEDTLS_CONFIG_FILE=full_config.h .
+    make
+
+    msg "build: cmake (in-tree) with -DMBEDTLS_CONFIG_FILE + -DMBEDTLS_USER_CONFIG_FILE"
+    # In the user config, disable one feature (for simplicity, pick a feature
+    # that nothing else depends on).
+    echo '#undef MBEDTLS_NIST_KW_C' >user_config.h
+
+    cmake -DGEN_FILES=OFF -DMBEDTLS_CONFIG_FILE=full_config.h -DMBEDTLS_USER_CONFIG_FILE=user_config.h .
+    make
+    not programs/test/query_compile_time_config MBEDTLS_NIST_KW_C
+
+    rm -f user_config.h full_config.h
+}
+support_build_cmake_custom_config_file () {
+    support_test_cmake_out_of_source
+}
+
+component_build_cmake_programs_no_testing () {
+    # Verify that the type of builds performed by oss-fuzz don't get accidentally broken
+    msg "build: cmake with -DENABLE_PROGRAMS=ON and -DENABLE_TESTING=OFF"
+    cmake -DENABLE_PROGRAMS=ON -DENABLE_TESTING=OFF .
+    make
+}
+support_build_cmake_programs_no_testing () {
+    support_test_cmake_out_of_source
+}
+
+component_build_zeroize_checks () {
+    msg "build: check for obviously wrong calls to mbedtls_platform_zeroize()"
+
+    scripts/config.py full
+
+    # Only compile - we're looking for sizeof-pointer-memaccess warnings
+    make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/user-config-zeroize-memset.h\"' -DMBEDTLS_TEST_DEFINES_ZEROIZE -Werror -Wsizeof-pointer-memaccess"
+}
+
+
+component_test_zeroize () {
+    # Test that the function mbedtls_platform_zeroize() is not optimized away by
+    # different combinations of compilers and optimization flags by using an
+    # auxiliary GDB script. Unfortunately, GDB does not return error values to the
+    # system in all cases that the script fails, so we must manually search the
+    # output to check whether the pass string is present and no failure strings
+    # were printed.
+
+    # Don't try to disable ASLR. We don't care about ASLR here. We do care
+    # about a spurious message if Gdb tries and fails, so suppress that.
+    gdb_disable_aslr=
+    if [ -z "$(gdb -batch -nw -ex 'set disable-randomization off' 2>&1)" ]; then
+        gdb_disable_aslr='set disable-randomization off'
+    fi
+
+    for optimization_flag in -O2 -O3 -Ofast -Os; do
+        for compiler in clang gcc; do
+            msg "test: $compiler $optimization_flag, mbedtls_platform_zeroize()"
+            make programs CC="$compiler" DEBUG=1 CFLAGS="$optimization_flag"
+            gdb -ex "$gdb_disable_aslr" -x tests/scripts/test_zeroize.gdb -nw -batch -nx 2>&1 | tee test_zeroize.log
+            grep "The buffer was correctly zeroized" test_zeroize.log
+            not grep -i "error" test_zeroize.log
+            rm -f test_zeroize.log
+            make clean
+        done
+    done
+}
+
+component_test_psa_compliance () {
+    # The arch tests build with gcc, so require use of gcc here to link properly
+    msg "build: make, default config (out-of-box), libmbedcrypto.a only"
+    CC=gcc make -C library libmbedcrypto.a
+
+    msg "unit test: test_psa_compliance.py"
+    CC=gcc ./tests/scripts/test_psa_compliance.py
+}
+
+support_test_psa_compliance () {
+    # psa-compliance-tests only supports CMake >= 3.10.0
+    ver="$(cmake --version)"
+    ver="${ver#cmake version }"
+    ver_major="${ver%%.*}"
+
+    ver="${ver#*.}"
+    ver_minor="${ver%%.*}"
+
+    [ "$ver_major" -eq 3 ] && [ "$ver_minor" -ge 10 ]
+}
+
+component_check_code_style () {
+    msg "Check C code style"
+    ./scripts/code_style.py
+}
+
+support_check_code_style () {
+    case $(uncrustify --version) in
+        *0.75.1*) true;;
+        *) false;;
+    esac
+}
+
+component_check_python_files () {
+    msg "Lint: Python scripts"
+    tests/scripts/check-python-files.sh
+}
+
+component_check_test_helpers () {
+    msg "unit test: generate_test_code.py"
+    # unittest writes out mundane stuff like number or tests run on stderr.
+    # Our convention is to reserve stderr for actual errors, and write
+    # harmless info on stdout so it can be suppress with --quiet.
+    ./framework/scripts/test_generate_test_code.py 2>&1
+
+    msg "unit test: translate_ciphers.py"
+    python3 -m unittest tests/scripts/translate_ciphers.py 2>&1
+}