ChangeLog

mbed TLS ChangeLog (Sorted per branch, date)

= mbed TLS 2.1.10 branch released 2017-xx-xx

Security
   * Fix buffer overflow in RSA-PSS verification when the hash is too
     large for the key size. Found by Seth Terashima, Qualcomm Product
     Security Initiative, Qualcomm Technologies Inc.
   * Fix buffer overflow in RSA-PSS verification when the unmasked
     data is all zeros.
   * Fix unsafe bounds check in ssl_parse_client_psk_identity() when adding
     64kB to the address of the SSL buffer wraps around.
   * Fix a potential heap buffer overflow in mbedtls_ssl_write. When the (by
     default enabled) maximum fragment length extension is disabled in the
     config and the application data buffer passed to mbedtls_ssl_write
     is larger than the internal message buffer (16384 bytes by default), the
     latter overflows. The exploitability of this issue depends on whether the
     application layer can be forced into sending such large packets. The issue
     was independently reported by Tim Nordell via e-mail and by Florin Petriuc
     and sjorsdewit on GitHub. Fix proposed by Florin Petriuc in #1022. Fixes #707.
   * Tighten should-be-constant-time memcmp against compiler optimizations.
   * Ensure that buffers are cleared after use if they contain sensitive data.
     Changes were introduced in multiple places in the library.
   * Set PEM buffer to zero before freeing it, to avoid decoded private keys
     being leaked to memory after release.
   * Fix dhm_check_range() failing to detect trivial subgroups and potentially
     leaking 1 bit of the private key. Reported by prashantkspatil.
   * Make mbedtls_mpi_read_binary constant-time with respect to
     the input data. Previously, trailing zero bytes were detected
     and omitted for the sake of saving memory, but potentially
     leading to slight timing differences.
     Reported by Marco Macchetti, Kudelski Group.
   * Wipe stack buffer temporarily holding EC private exponent
     after keypair generation.
   * Fix heap corruption in implementation of truncated HMAC extension.
     When the truncated HMAC extension is enabled and CBC is used,
     sending a malicious application packet can be used to selectively
     corrupt 6 bytes on the peer's heap, potentially leading to crash or
     remote code execution. This can be triggered remotely from either
     side in both TLS and DTLS.
   * Fix a potential heap buffer overread in ALPN extension parsing
     (server-side). Could result in application crash, but only if an ALPN
     name larger than 16 bytes had been configured on the server.

Features
   * Allow comments in test data files.
   * The selftest program can execute a subset of the tests based on command
     line arguments.
   * Improve the timing self-tests to be more robust when run on a
     heavily-loaded machine.

Bugfix
   * Fix some invalid RSA-PSS signatures with keys of size 8N+1 that were
     accepted. Generating these signatures required the private key.
   * Fix ssl_parse_record_header() to silently discard invalid DTLS records
     as recommended in RFC 6347 Section 4.1.2.7.
   * Fix memory leak in mbedtls_ssl_set_hostname() when called multiple times.
     Found by projectgus and jethrogb, #836.
   * Fix usage help in ssl_server2 example. Found and fixed by Bei Lin.
   * Parse signature algorithm extension when renegotiating. Previously,
     renegotiated handshakes would only accept signatures using SHA-1
     regardless of the peer's preferences, or fail if SHA-1 was disabled.
   * Fix leap year calculation in x509_date_is_valid() to ensure that invalid
     dates on leap years with 100 and 400 intervals are handled correctly. Found
     by Nicholas Wilson. #694
   * Fix out-of-memory problem when parsing 4096-bit PKCS8-encrypted RSA keys.
     Found independently by Florian in the mbed TLS forum and by Mishamax.
     #878, #1019.
   * Fix unchecked return codes from AES, DES and 3DES functions in
     pem_aes_decrypt(), pem_des_decrypt() and pem_des3_decrypt() respectively.
     If a call to one of the functions of the cryptographic primitive modules
     failed, the error may not be noticed by the function
     mbedtls_pem_read_buffer() causing it to return invalid values. Found by
     Guido Vranken. #756
   * Include configuration file in md.h, to fix compilation warnings.
     Reported by aaronmdjones in #1001
   * Correct extraction of signature-type from PK instance in X.509 CRT and CSR
     writing routines that prevented these functions to work with alternative
     RSA implementations. Raised by J.B. in the Mbed TLS forum. Fixes #1011.
   * Don't print X.509 version tag for v1 CRT's, and omit extensions for
     non-v3 CRT's.
   * Fix bugs in RSA test suite under MBEDTLS_NO_PLATFORM_ENTROPY. #1023 #1024
   * Fix net_would_block to avoid modification by errno through fcntl call.
     Found by nkolban. Fixes #845.
   * Fix handling of handshake messages in mbedtls_ssl_read in case
     MBEDTLS_SSL_RENEGOTIATION is disabled. Found by erja-gp.
   * Add a check for invalid private parameters in ecdsa_sign.
     Reported by Yolan Romailler.
   * Fix word size check in in pk.c to not depend on MBEDTLS_HAVE_INT64.
   * Add size-checks for record and handshake message content, securing
     fragile yet non-exploitable code-paths.
   * Fix crash when calling mbedtls_ssl_cache_free() twice. Found by
     MilenkoMitrovic, #1104
   * Fix mbedtls_timing_alarm(0) on Unix.
   * Fix use of uninitialized memory in mbedtls_timing_get_timer when reset=1.

Changes
   * Extend cert_write example program by options to set the CRT version
     and the message digest. Further, allow enabling/disabling of authority
     identifier, subject identifier and basic constraints extensions.

= mbed TLS 2.1.9 branch released 2017-08-10

Security
   * Fix authentication bypass in SSL/TLS: when authmode is set to optional,
     mbedtls_ssl_get_verify_result() would incorrectly return 0 when the peer's
     X.509 certificate chain had more than MBEDTLS_X509_MAX_INTERMEDIATE_CA
     (default: 8) intermediates, even when it was not trusted. This could be
     triggered remotely from either side. (With authmode set to 'required'
     (the default), the handshake was correctly aborted).
   * Reliably zeroize sensitive data after use in AES example applications
     programs/aes/aescrypt2 and programs/aes/crypt_and_hash.
     Found by Laurent Simon.

API Changes
   * Certificate verification functions now set flags to -1 in case the full
     chain was not verified due to an internal error (including in the verify
     callback) or chain length limitations.
   * With authmode set to optional, the TLS handshake is now aborted if the
     verification of the peer's certificate failed due to an overlong chain or
     a fatal error in the verify callback.

Bugfix
   * Add a check if iv_len is zero in GCM, and return an error if it is zero.
     Reported by roberto. #716
   * Replace preprocessor condition from #if defined(MBEDTLS_THREADING_PTHREAD)
     to #if defined(MBEDTLS_THREADING_C) as the library cannot assume they will
     always be implemented by pthread support. Fix for #696
   * Fix a resource leak on Windows platforms in mbedtls_x509_crt_parse_path(),
     in the case of an error. Found by redplait. #590
   * Add MBEDTLS_MPI_CHK to check for error value of mbedtls_mpi_fill_random.
     Reported and fix suggested by guidovranken in #740
   * Fix a potential integer overflow in the version verification for DER
     encoded X509 CRLs. The overflow would enable maliciously constructed CRLs
     to bypass the version verification check. Found by Peng Li/Yueh-Hsun Lin,
     KNOX Security, Samsung Research America
   * Fix a potential integer overflow in the version verification for DER
     encoded X509 certificates. The overflow would enable maliciously
     constructed certificates to bypass the certificate verification check.
   * Fix potential integer overflow in the version verification for DER
     encoded X509 CSRs. The overflow would enable maliciously constructed CSRs
     to bypass the version verification check. Found by Peng Li/Yueh-Hsun Lin,
     KNOX Security, Samsung Research America

Changes
   * Avoid shadowing of time and index functions through mbed TLS function
     arguments. Found by inestlerode. Fixes #557.
   * Improve documentation of PKCS1 decryption functions.

= mbed TLS 2.1.8 branch released 2017-06-21

Security
   * Fixed unlimited overread of heap-based buffer in mbedtls_ssl_read().
     The issue could only happen client-side with renegotiation enabled.
     Could result in DoS (application crash) or information leak
     (if the application layer sent data read from mbedtls_ssl_read()
     back to the server or to a third party). Can be triggered remotely.
   * Add exponent blinding to RSA private operations as a countermeasure
     against side-channel attacks like the cache attack described in
     https://arxiv.org/abs/1702.08719v2.
     Found and fix proposed by Michael Schwarz, Samuel Weiser, Daniel Gruss,
     Clémentine Maurice and Stefan Mangard.
   * Wipe stack buffers in RSA private key operations
     (rsa_rsaes_pkcs1_v15_decrypt(), rsa_rsaes_oaep_decrypt). Found by Laurent
     Simon.
   * Removed SHA-1 and RIPEMD-160 from the default hash algorithms for
     certificate verification. SHA-1 can be turned back on with a compile-time
     option if needed.
   * Fixed offset in FALLBACK_SCSV parsing that caused TLS server to fail to
     detect it sometimes. Reported by Hugo Leisink. #810
   * Tighten parsing of RSA PKCS#1 v1.5 signatures, to avoid a
     potential Bleichenbacher/BERserk-style attack.

Bugfix
   * Remove macros from compat-1.3.h that correspond to deleted items from most
     recent versions of the library. Found by Kyle Keen.
   * Fixed issue in the Threading module that prevented mutexes from
     initialising. Found by sznaider. #667 #843
   * Fix insufficient support for signature-hash-algorithm extension,
     resulting in compatibility problems with Chrome. Found by hfloyrd. #823
   * Accept empty trusted CA chain in authentication mode
     MBEDTLS_SSL_VERIFY_OPTIONAL. Found by jethrogb. #864
   * Fix implementation of mbedtls_ssl_parse_certificate() to not annihilate
     fatal errors in authentication mode MBEDTLS_SSL_VERIFY_OPTIONAL and to
     reflect bad EC curves within verification result.
   * Fix bug that caused the modular inversion function to accept the invalid
     modulus 1 and therefore to hang. Found by blaufish. #641.
   * Fix incorrect sign computation in modular exponentiation when the base is
     a negative MPI. Previously the result was always negative. Found by Guido
     Vranken.
   * Fix a numerical underflow leading to stack overflow in mpi_read_file()
     that was triggered uppon reading an empty line. Found by Guido Vranken.

Changes
   * Clarify ECDSA documentation and improve the sample code to avoid
     misunderstanding and potentially dangerous use of the API. Pointed out
     by Jean-Philippe Aumasson.

= mbed TLS 2.1.7 branch released 2017-03-08

Security
   * Add checks to prevent signature forgeries for very large messages while
     using RSA through the PK module in 64-bit systems. The issue was caused by
     some data loss when casting a size_t to an unsigned int value in the
     functions rsa_verify_wrap(), rsa_sign_wrap(), rsa_alt_sign_wrap() and
     mbedtls_pk_sign(). Found by Jean-Philippe Aumasson.
   * Fixed potential livelock during the parsing of a CRL in PEM format in
     mbedtls_x509_crl_parse(). A string containing a CRL followed by trailing
     characters after the footer could result in the execution of an infinite
     loop. The issue can be triggered remotely. Found by Greg Zaverucha,
     Microsoft.
   * Fixed a bug that caused freeing a buffer that was allocated on the stack,
     when verifying the validity of a key on secp224k1. This could be
     triggered remotely for example with a maliciously constructed certificate
     and potentially could lead to remote code execution on some platforms.
     Reported independently by rongsaws and Aleksandar Nikolic, Cisco Talos
     team. #569 CVE-2017-2784

Bugfix
   * Fix output certificate verification flags set by x509_crt_verify_top() when
     traversing a chain of trusted CA. The issue would cause both flags,
     MBEDTLS_X509_BADCERT_NOT_TRUSTED and MBEDTLS_X509_BADCERT_EXPIRED, to be
     set when the verification conditions are not met regardless of the cause.
     Found by Harm Verhagen and inestlerode. #665 #561
   * Fix the redefinition of macro ssl_set_bio to an undefined symbol
     mbedtls_ssl_set_bio_timeout in compat-1.3.h, by removing it.
     Found by omlib-lin. #673
   * Fix unused variable/function compilation warnings in pem.c and x509_csr.c
     that are reported when building mbed TLS with a config.h that does not
     define MBEDTLS_PEM_PARSE_C. Found by omnium21. #562
   * Fix incorrect renegotiation condition in ssl_check_ctr_renegotiate() that
     would compare 64 bits of the record counter instead of 48 bits as indicated
     in RFC 6347 Section 4.3.1. This could cause the execution of the
     renegotiation routines at unexpected times when the protocol is DTLS. Found
     by wariua. #687
   * Fixed multiple buffer overreads in mbedtls_pem_read_buffer() when parsing
     the input string in PEM format to extract the different components. Found
     by Eyal Itkin.
   * Fixed potential arithmetic overflow in mbedtls_ctr_drbg_reseed() that could
     cause buffer bound checks to be bypassed. Found by Eyal Itkin.
   * Fixed potential arithmetic overflows in mbedtls_cipher_update() that could
     cause buffer bound checks to be bypassed. Found by Eyal Itkin.
   * Fixed potential arithmetic overflow in mbedtls_md2_update() that could
     cause buffer bound checks to be bypassed. Found by Eyal Itkin.
   * Fixed potential arithmetic overflow in mbedtls_base64_decode() that could
     cause buffer bound checks to be bypassed. Found by Eyal Itkin.
   * Fixed heap overreads in mbedtls_x509_get_time(). Found by Peng
     Li/Yueh-Hsun Lin, KNOX Security, Samsung Research America.
   * Fix potential memory leak in mbedtls_x509_crl_parse(). The leak was caused
     by missing calls to mbedtls_pem_free() in cases when a
     MBEDTLS_ERR_PEM_NO_HEADER_FOOTER_PRESENT error was encountered. Found and
     fix proposed by Guido Vranken. #722
   * Fixed the templates used to generate project and solution files for Visual
     Studio 2015 as well as the files themselves, to remove a build warning
     generated in Visual Studio 2015. Reported by Steve Valliere. #742
   * Fix a resource leak in ssl_cookie, when using MBEDTLS_THREADING_C.
     Raised and fix suggested by Alan Gillingham in the mbed TLS forum. #771
   * Fix 1 byte buffer overflow in mbedtls_mpi_write_string() when the MPI
     number to write in hexadecimal is negative and requires an odd number of
     digits. Found and fixed by Guido Vranken.
   * Fix unlisted DES configuration dependency in some pkparse test cases. Found
     by inestlerode. #555

= mbed TLS 2.1.6 branch released 2016-10-17

Security
   * Removed the MBEDTLS_SSL_AEAD_RANDOM_IV option, because it was not compliant
     with RFC-5116 and could lead to session key recovery in very long TLS
     sessions. "Nonce-Disrespecting Adversaries Practical Forgery Attacks on GCM in
     TLS" - H. Bock, A. Zauner, S. Devlin, J. Somorovsky, P. Jovanovic.
     https://eprint.iacr.org/2016/475.pdf
   * Fixed potential stack corruption in mbedtls_x509write_crt_der() and
     mbedtls_x509write_csr_der() when the signature is copied to the buffer
     without checking whether there is enough space in the destination. The
     issue cannot be triggered remotely. Found by Jethro Beekman.

Bugfix
   * Fix an issue that caused valid certificates being rejected whenever an
     expired or not yet valid version of the trusted certificate was before the
     valid version in the trusted certificate list.
   * Fix incorrect handling of block lengths in crypt_and_hash.c sample program,
     when GCM is used. Found by udf2457. #441
   * Fix for key exchanges based on ECDH-RSA or ECDH-ECDSA which weren't
     enabled unless others were also present. Found by David Fernandez. #428
   * Fixed cert_app.c sample program for debug output and for use when no root
     certificates are provided.
   * Fix conditional statement that would cause a 1 byte overread in
     mbedtls_asn1_get_int(). Found and fixed by Guido Vranken. #599
   * Fixed pthread implementation to avoid unintended double initialisations
     and double frees. Found by Niklas Amnebratt.
   * Fixed the sample applications gen_key.c, cert_req.c and cert_write.c for
     builds where the configuration MBEDTLS_PEM_WRITE_C is not defined. Found
     by inestlerode. #559.
   * Fix mbedtls_x509_get_sig() to update the ASN1 type in the mbedtls_x509_buf
     data structure until after error checks are successful. Found by
     subramanyam-c. #622
   * Fix documentation and implementation missmatch for function arguments of
     mbedtls_gcm_finish(). Found by cmiatpaar. #602
   * Guarantee that P>Q at RSA key generation. Found by inestlerode. #558
   * Fix potential byte overread when verifying malformed SERVER_HELLO in
     ssl_parse_hello_verify_request() for DTLS. Found by Guido Vranken.
   * Fix check for validity of date when parsing in mbedtls_x509_get_time().
     Found by subramanyam-c. #626
   * Fix missing return code check after call to mbedtls_md_setup() that could
     result in usage of invalid md_ctx in mbedtls_rsa_rsaes_oaep_encrypt(),
     mbedtls_rsa_rsaes_oaep_decrypt(), mbedtls_rsa_rsassa_pss_sign() and
     mbedtls_rsa_rsassa_pss_verify_ext(). Fixed by Brian J. Murray. #502

= mbed TLS 2.1.5 branch released 2016-06-28

Security
   * Fix missing padding length check in mbedtls_rsa_rsaes_pkcs1_v15_decrypt
     required by PKCS1 v2.2
   * Fix a potential integer underflow to buffer overread in
     mbedtls_rsa_rsaes_oaep_decrypt. It is not triggerable remotely in
     SSL/TLS.
   * Fix potential integer overflow to buffer overflow in
     mbedtls_rsa_rsaes_pkcs1_v15_encrypt and mbedtls_rsa_rsaes_oaep_encrypt

Bugfix
   * Fix bug in mbedtls_mpi_add_mpi() that caused wrong results when the three
     arguments where the same (in-place doubling). Found and fixed by Janos
     Follath. #309
   * Fix issue in Makefile that prevented building using armar. #386
   * Fix bug in mbedtls_x509_crt_parse that caused trailing extra data in the
     buffer after DER certificates to be included in the raw representation.
   * Fix issue that caused a hang when generating RSA keys of odd bitlength
   * Fix bug in mbedtls_rsa_rsaes_pkcs1_v15_encrypt that made null pointer
     dereference possible.
   * Fix issue that caused a crash if invalid curves were passed to
     mbedtls_ssl_conf_curves. #373
   * Fix issue in ssl_fork_server which was preventing it from functioning. #429

Changes
   * On ARM platforms, when compiling with -O0 with GCC, Clang or armcc5,
     don't use the optimized assembly for bignum multiplication. This removes
     the need to pass -fomit-frame-pointer to avoid a build error with -O0.
  * Fix non-compliance server extension handling. Extensions for SSLv3 are now
     ignored, as required by RFC6101.

= mbed TLS 2.1.4 released 2016-01-05

Security
   * Fix potential double free when mbedtls_asn1_store_named_data() fails to
     allocate memory. Only used for certificate generation, not triggerable
     remotely in SSL/TLS. Found by Rafał Przywara. #367
   * Disable MD5 handshake signatures in TLS 1.2 by default to prevent the
     SLOTH attack on TLS 1.2 server authentication (other attacks from the
     SLOTH paper do not apply to any version of mbed TLS or PolarSSL).
     https://www.mitls.org/pages/attacks/SLOTH

Bugfix
   * Fix over-restrictive length limit in GCM. Found by Andreas-N. #362
   * Fix bug in certificate validation that caused valid chains to be rejected
     when the first intermediate certificate has pathLenConstraint=0. Found by
     Nicholas Wilson. Introduced in mbed TLS 2.1.3. #280
   * Removed potential leak in mbedtls_rsa_rsassa_pkcs1_v15_sign(), found by
     JayaraghavendranK. #372
   * Fix suboptimal handling of unexpected records that caused interop issues
     with some peers over unreliable links. Avoid dropping an entire DTLS
     datagram if a single record in a datagram is unexpected, instead only
     drop the record and look at subsequent records (if any are present) in
     the same datagram. Found by jeannotlapin. #345

= mbed TLS 2.1.3 released 2015-11-04

Security
   * Fix potential double free if mbedtls_ssl_conf_psk() is called more than
     once and some allocation fails. Cannot be forced remotely. Found by Guido
     Vranken, Intelworks.
   * Fix potential heap corruption on Windows when
     mbedtls_x509_crt_parse_path() is passed a path longer than 2GB. Cannot be
     triggered remotely. Found by Guido Vranken, Intelworks.
   * Fix potential buffer overflow in some asn1_write_xxx() functions.
     Cannot be triggered remotely unless you create X.509 certificates based
     on untrusted input or write keys of untrusted origin. Found by Guido
     Vranken, Intelworks.
   * The X509 max_pathlen constraint was not enforced on intermediate
     certificates. Found by Nicholas Wilson, fix and tests provided by
     Janos Follath. #280 and #319

Bugfix
   * Self-signed certificates were not excluded from pathlen counting,
     resulting in some valid X.509 being incorrectly rejected. Found and fix
     provided by Janos Follath. #319
   * Fix build error with configurations where ECDHE-PSK is the only key
     exchange. Found and fix provided by Chris Hammond. #270
   * Fix build error with configurations where RSA, RSA-PSK, ECDH-RSA or
     ECHD-ECDSA if the only key exchange. Multiple reports. #310
   * Fixed a bug causing some handshakes to fail due to some non-fatal alerts
     not being properly ignored. Found by mancha and Kasom Koht-arsa, #308
   * mbedtls_x509_crt_verify(_with_profile)() now also checks the key type and
     size/curve against the profile. Before that, there was no way to set a
     minimum key size for end-entity certificates with RSA keys. Found by
     Matthew Page of Scannex Electronics Ltd.
   * Fix failures in MPI on Sparc(64) due to use of bad assembly code.
     Found by Kurt Danielson. #292
   * Fix typo in name of the extKeyUsage OID. Found by inestlerode, #314
   * Fix bug in ASN.1 encoding of booleans that caused generated CA
     certificates to be rejected by some applications, including OS X
     Keychain. Found and fixed by Jonathan Leroy, Inikup.

Changes
   * Improved performance of mbedtls_ecp_muladd() when one of the scalars is 1
     or -1.

= mbed TLS 2.1.2 released 2015-10-06

Security
   * Added fix for CVE-2015-5291 to prevent heap corruption due to buffer
     overflow of the hostname or session ticket. Found by Guido Vranken,
     Intelworks.
   * Fix potential double-free if mbedtls_ssl_set_hs_psk() is called more than
     once in the same handhake and mbedtls_ssl_conf_psk() was used.
     Found and patch provided by Guido Vranken, Intelworks. Cannot be forced
     remotely.
   * Fix stack buffer overflow in pkcs12 decryption (used by
     mbedtls_pk_parse_key(file)() when the password is > 129 bytes.
     Found by Guido Vranken, Intelworks. Not triggerable remotely.
   * Fix potential buffer overflow in mbedtls_mpi_read_string().
     Found by Guido Vranken, Intelworks. Not exploitable remotely in the context
     of TLS, but might be in other uses. On 32 bit machines, requires reading a
     string of close to or larger than 1GB to exploit; on 64 bit machines, would
     require reading a string of close to or larger than 2^62 bytes.
   * Fix potential random memory allocation in mbedtls_pem_read_buffer()
     on crafted PEM input data. Found and fix provided by Guido Vranken,
     Intelworks. Not triggerable remotely in TLS. Triggerable remotely if you
     accept PEM data from an untrusted source.
   * Fix possible heap buffer overflow in base64_encoded() when the input
     buffer is 512MB or larger on 32-bit platforms. Found by Guido Vranken,
     Intelworks. Not trigerrable remotely in TLS.
   * Fix potential double-free if mbedtls_conf_psk() is called repeatedly on
     the same mbedtls_ssl_config object and memory allocation fails. Found by
     Guido Vranken, Intelworks. Cannot be forced remotely.
   * Fix potential heap buffer overflow in servers that perform client
     authentication against a crafted CA cert. Cannot be triggered remotely
     unless you allow third parties to pick trust CAs for client auth.
     Found by Guido Vranken, Intelworks.

Bugfix
   * Fix compile error in net.c with musl libc. Found and patch provided by
     zhasha (#278).
   * Fix macroization of 'inline' keyword when building as C++. (#279)

Changes
   * Added checking of hostname length in mbedtls_ssl_set_hostname() to ensure
     domain names are compliant with RFC 1035.
   * Fixed paths for check_config.h in example config files. (Found by bachp)
     (#291)

= mbed TLS 2.1.1 released 2015-09-17

Security
   * Add countermeasure against Lenstra's RSA-CRT attack for PKCS#1 v1.5
     signatures. (Found by Florian Weimer, Red Hat.)
     https://securityblog.redhat.com/2015/09/02/factoring-rsa-keys-with-tls-perfect-forward-secrecy/
   * Fix possible client-side NULL pointer dereference (read) when the client
     tries to continue the handshake after it failed (a misuse of the API).
     (Found and patch provided by Fabian Foerg, Gotham Digital Science using
     afl-fuzz.)

Bugfix
   * Fix warning when using a 64bit platform. (found by embedthis) (#275)
   * Fix off-by-one error in parsing Supported Point Format extension that
     caused some handshakes to fail.

Changes
   * Made X509 profile pointer const in mbedtls_ssl_conf_cert_profile() to allow
     use of mbedtls_x509_crt_profile_next. (found by NWilson)
   * When a client initiates a reconnect from the same port as a live
     connection, if cookie verification is available
     (MBEDTLS_SSL_DTLS_HELLO_VERIFY defined in config.h, and usable cookie
     callbacks set with mbedtls_ssl_conf_dtls_cookies()), this will be
     detected and mbedtls_ssl_read() will return
     MBEDTLS_ERR_SSL_CLIENT_RECONNECT - it is then possible to start a new
     handshake with the same context. (See RFC 6347 section 4.2.8.)

= mbed TLS 2.1.0 released 2015-09-04

Features
   * Added support for yotta as a build system.
   * Primary open source license changed to Apache 2.0 license.

Bugfix
   * Fix segfault in the benchmark program when benchmarking DHM.
   * Fix build error with CMake and pre-4.5 versions of GCC (found by Hugo
     Leisink).
   * Fix bug when parsing a ServerHello without extensions (found by David
     Sears).
   * Fix bug in CMake lists that caused libmbedcrypto.a not to be installed
     (found by Benoit Lecocq).
   * Fix bug in Makefile that caused libmbedcrypto and libmbedx509 not to be
     installed (found by Rawi666).
   * Fix compile error with armcc 5 with --gnu option.
   * Fix bug in Makefile that caused programs not to be installed correctly
     (found by robotanarchy) (#232).
   * Fix bug in Makefile that prevented from installing without building the
     tests (found by robotanarchy) (#232).
   * Fix missing -static-libgcc when building shared libraries for Windows
     with make.
   * Fix link error when building shared libraries for Windows with make.
   * Fix error when loading libmbedtls.so.
   * Fix bug in mbedtls_ssl_conf_default() that caused the default preset to
     be always used (found by dcb314) (#235)
   * Fix bug in mbedtls_rsa_public() and mbedtls_rsa_private() that could
     result trying to unlock an unlocked mutex on invalid input (found by
     Fredrik Axelsson) (#257)
   * Fix -Wshadow warnings (found by hnrkp) (#240)
   * Fix memory corruption on client with overlong PSK identity, around
     SSL_MAX_CONTENT_LEN or higher - not triggerrable remotely (found by
     Aleksandrs Saveljevs) (#238)
   * Fix unused function warning when using MBEDTLS_MDx_ALT or
     MBEDTLS_SHAxxx_ALT (found by Henrik) (#239)
   * Fix memory corruption in pkey programs (found by yankuncheng) (#210)

Changes
   * The PEM parser now accepts a trailing space at end of lines (#226).
   * It is now possible to #include a user-provided configuration file at the
     end of the default config.h by defining MBEDTLS_USER_CONFIG_FILE on the
     compiler's command line.
   * When verifying a certificate chain, if an intermediate certificate is
     trusted, no later cert is checked. (suggested by hannes-landeholm)
     (#220).
   * Prepend a "thread identifier" to debug messages (issue pointed out by
     Hugo Leisink) (#210).
   * Add mbedtls_ssl_get_max_frag_len() to query the current maximum fragment
     length.

= mbed TLS 2.0.0 released 2015-07-13

Features
   * Support for DTLS 1.0 and 1.2 (RFC 6347).
   * Ability to override core functions from MDx, SHAx, AES and DES modules
     with custom implementation (eg hardware accelerated), complementing the
     ability to override the whole module.
   * New server-side implementation of session tickets that rotate keys to
     preserve forward secrecy, and allows sharing across multiple contexts.
   * Added a concept of X.509 cerificate verification profile that controls
     which algorithms and key sizes (curves for ECDSA) are acceptable.
   * Expanded configurability of security parameters in the SSL module with
     mbedtls_ssl_conf_dhm_min_bitlen() and mbedtls_ssl_conf_sig_hashes().
   * Introduced a concept of presets for SSL security-relevant configuration
     parameters.

API Changes
   * The library has been split into libmbedcrypto, libmbedx509, libmbedtls.
     You now need to link to all of them if you use TLS for example.
   * All public identifiers moved to the mbedtls_* or MBEDTLS_* namespace.
     Some names have been further changed to make them more consistent.
     Migration helpers scripts/rename.pl and include/mbedlts/compat-1.3.h are
     provided. Full list of renamings in scripts/data_files/rename-1.3-2.0.txt
   * Renamings of fields inside structures, not covered by the previous list:
     mbedtls_cipher_info_t.key_length -> key_bitlen
     mbedtls_cipher_context_t.key_length -> key_bitlen
     mbedtls_ecp_curve_info.size -> bit_size
   * Headers are now found in the 'mbedtls' directory (previously 'polarssl').
   * The following _init() functions that could return errors have
     been split into an _init() that returns void and another function that
     should generally be the first function called on this context after init:
     mbedtls_ssl_init() -> mbedtls_ssl_setup()
     mbedtls_ccm_init() -> mbedtls_ccm_setkey()
     mbedtls_gcm_init() -> mbedtls_gcm_setkey()
     mbedtls_hmac_drbg_init() -> mbedtls_hmac_drbg_seed(_buf)()
     mbedtls_ctr_drbg_init()  -> mbedtls_ctr_drbg_seed()
     Note that for mbedtls_ssl_setup(), you need to be done setting up the
     ssl_config structure before calling it.
   * Most ssl_set_xxx() functions (all except ssl_set_bio(), ssl_set_hostname(),
     ssl_set_session() and ssl_set_client_transport_id(), plus
     ssl_legacy_renegotiation()) have been renamed to mbedtls_ssl_conf_xxx()
     (see rename.pl and compat-1.3.h above) and their first argument's type
     changed from ssl_context to ssl_config.
   * ssl_set_bio() changed signature (contexts merged, order switched, one
     additional callback for read-with-timeout).
   * The following functions have been introduced and must be used in callback
     implementations (SNI, PSK) instead of their *conf counterparts:
     mbedtls_ssl_set_hs_own_cert()
     mbedtls_ssl_set_hs_ca_chain()
     mbedtls_ssl_set_hs_psk()
   * mbedtls_ssl_conf_ca_chain() lost its last argument (peer_cn), now set
     using mbedtls_ssl_set_hostname().
   * mbedtls_ssl_conf_session_cache() changed prototype (only one context
     pointer, parameters reordered).
   * On server, mbedtls_ssl_conf_session_tickets_cb() must now be used in
     place of mbedtls_ssl_conf_session_tickets() to enable session tickets.
   * The SSL debug callback gained two new arguments (file name, line number).
   * Debug modes were removed.
   * mbedtls_ssl_conf_truncated_hmac() now returns void.
   * mbedtls_memory_buffer_alloc_init() now returns void.
   * X.509 verification flags are now an uint32_t. Affect the signature of:
     mbedtls_ssl_get_verify_result()
     mbedtls_x509_ctr_verify_info()
     mbedtls_x509_crt_verify() (flags, f_vrfy -> needs to be updated)
     mbedtls_ssl_conf_verify() (f_vrfy -> needs to be updated)
   * The following functions changed prototype to avoid an in-out length
     parameter:
     mbedtls_base64_encode()
     mbedtls_base64_decode()
     mbedtls_mpi_write_string()
     mbedtls_dhm_calc_secret()
   * In the NET module, all "int" and "int *" arguments for file descriptors
     changed type to "mbedtls_net_context *".
   * net_accept() gained new arguments for the size of the client_ip buffer.
   * In the threading layer, mbedtls_mutex_init() and mbedtls_mutex_free() now
     return void.
   * ecdsa_write_signature() gained an addtional md_alg argument and
     ecdsa_write_signature_det() was deprecated.
   * pk_sign() no longer accepts md_alg == POLARSSL_MD_NONE with ECDSA.
   * Last argument of x509_crt_check_key_usage() and
     mbedtls_x509write_crt_set_key_usage() changed from int to unsigned.
   * test_ca_list (from certs.h) is renamed to test_cas_pem and is only
     available if POLARSSL_PEM_PARSE_C is defined (it never worked without).
   * Test certificates in certs.c are no longer guaranteed to be nul-terminated
     strings; use the new *_len variables instead of strlen().
   * Functions mbedtls_x509_xxx_parse(), mbedtls_pk_parse_key(),
     mbedtls_pk_parse_public_key() and mbedtls_dhm_parse_dhm() now expect the
     length parameter to include the terminating null byte for PEM input.
   * Signature of mpi_mul_mpi() changed to make the last argument unsigned
   * calloc() is now used instead of malloc() everywhere. API of platform
     layer and the memory_buffer_alloc module changed accordingly.
     (Thanks to Mansour Moufid for helping with the replacement.)
   * Change SSL_DISABLE_RENEGOTIATION config.h flag to SSL_RENEGOTIATION
     (support for renegotiation now needs explicit enabling in config.h).
   * Split MBEDTLS_HAVE_TIME into MBEDTLS_HAVE_TIME and MBEDTLS_HAVE_TIME_DATE
     in config.h
   * net_connect() and net_bind() have a new 'proto' argument to choose
     between TCP and UDP, using the macros NET_PROTO_TCP or NET_PROTO_UDP.
     Their 'port' argument type is changed to a string.
   * Some constness fixes

Removals
   * Removed mbedtls_ecp_group_read_string(). Only named groups are supported.
   * Removed mbedtls_ecp_sub() and mbedtls_ecp_add(), use
     mbedtls_ecp_muladd().
   * Removed individual mdX_hmac, shaX_hmac, mdX_file and shaX_file functions
     (use generic functions from md.h)
   * Removed mbedtls_timing_msleep(). Use mbedtls_net_usleep() or a custom
     waiting function.
   * Removed test DHM parameters from the test certs module.
   * Removed the PBKDF2 module (use PKCS5).
   * Removed POLARSSL_ERROR_STRERROR_BC (use mbedtls_strerror()).
   * Removed compat-1.2.h (helper for migrating from 1.2 to 1.3).
   * Removed openssl.h (very partial OpenSSL compatibility layer).
   * Configuration options POLARSSL_HAVE_LONGLONG was removed (now always on).
   * Configuration options POLARSSL_HAVE_INT8 and POLARSSL_HAVE_INT16 have
     been removed (compiler is required to support 32-bit operations).
   * Configuration option POLARSSL_HAVE_IPV6 was removed (always enabled).
   * Removed test program o_p_test, the script compat.sh does more.
   * Removed test program ssl_test, superseded by ssl-opt.sh.
   * Removed helper script active-config.pl

New deprecations
   * md_init_ctx() is deprecated in favour of md_setup(), that adds a third
     argument (allowing memory savings if HMAC is not used)

Semi-API changes (technically public, morally private)
   * Renamed a few headers to include _internal in the name. Those headers are
     not supposed to be included by users.
   * Changed md_info_t into an opaque structure (use md_get_xxx() accessors).
   * Changed pk_info_t into an opaque structure.
   * Changed cipher_base_t into an opaque structure.
   * Removed sig_oid2 and rename sig_oid1 to sig_oid in x509_crt and x509_crl.
   * x509_crt.key_usage changed from unsigned char to unsigned int.
   * Removed r and s from ecdsa_context
   * Removed mode from des_context and des3_context

Default behavior changes
   * The default minimum TLS version is now TLS 1.0.
   * RC4 is now blacklisted by default in the SSL/TLS layer, and excluded from the
     default ciphersuite list returned by ssl_list_ciphersuites()
   * Support for receiving SSLv2 ClientHello is now disabled by default at
     compile time.
   * The default authmode for SSL/TLS clients is now REQUIRED.
   * Support for RSA_ALT contexts in the PK layer is now optional. Since is is
     enabled in the default configuration, this is only noticeable if using a
     custom config.h
   * Default DHM parameters server-side upgraded from 1024 to 2048 bits.
   * A minimum RSA key size of 2048 bits is now enforced during ceritificate
     chain verification.
   * Negotiation of truncated HMAC is now disabled by default on server too.
   * The following functions are now case-sensitive:
     mbedtls_cipher_info_from_string()
     mbedtls_ecp_curve_info_from_name()
     mbedtls_md_info_from_string()
     mbedtls_ssl_ciphersuite_from_string()
     mbedtls_version_check_feature()

Requirement changes
   * The minimum MSVC version required is now 2010 (better C99 support).
   * The NET layer now unconditionnaly relies on getaddrinfo() and select().
   * Compiler is required to support C99 types such as long long and uint32_t.

API changes from the 1.4 preview branch
   * ssl_set_bio_timeout() was removed, split into mbedtls_ssl_set_bio() with
     new prototype, and mbedtls_ssl_set_read_timeout().
   * The following functions now return void:
     mbedtls_ssl_conf_transport()
     mbedtls_ssl_conf_max_version()
     mbedtls_ssl_conf_min_version()
   * DTLS no longer hard-depends on TIMING_C, but uses a callback interface
     instead, see mbedtls_ssl_set_timer_cb(), with the Timing module providing
     an example implementation, see mbedtls_timing_delay_context and
     mbedtls_timing_set/get_delay().
   * With UDP sockets, it is no longer necessary to call net_bind() again
     after a successful net_accept().

Changes
   * mbedtls_ctr_drbg_random() and mbedtls_hmac_drbg_random() are now
     thread-safe if MBEDTLS_THREADING_C is enabled.
   * Reduced ROM fooprint of SHA-256 and added an option to reduce it even
     more (at the expense of performance) MBEDTLS_SHA256_SMALLER.

= mbed TLS 1.3 branch

Security
   * With authmode set to SSL_VERIFY_OPTIONAL, verification of keyUsage and
     extendedKeyUsage on the leaf certificate was lost (results not accessible
     via ssl_get_verify_results()).
   * Add countermeasure against "Lucky 13 strikes back" cache-based attack,
     https://dl.acm.org/citation.cfm?id=2714625

Features
   * Improve ECC performance by using more efficient doubling formulas
     (contributed by Peter Dettman).
   * Add x509_crt_verify_info() to display certificate verification results.
   * Add support for reading DH parameters with privateValueLength included
     (contributed by Daniel Kahn Gillmor).
   * Add support for bit strings in X.509 names (request by Fredrik Axelsson).
   * Add support for id-at-uniqueIdentifier in X.509 names.
   * Add support for overriding snprintf() (except on Windows) and exit() in
     the platform layer.
   * Add an option to use macros instead of function pointers in the platform
     layer (helps get rid of unwanted references).
   * Improved Makefiles for Windows targets by fixing library targets and making
     cross-compilation easier (thanks to Alon Bar-Lev).
   * The benchmark program also prints heap usage for public-key primitives
     if POLARSSL_MEMORY_BUFFER_ALLOC_C and POLARSSL_MEMORY_DEBUG are defined.
   * New script ecc-heap.sh helps measuring the impact of ECC parameters on
     speed and RAM (heap only for now) usage.
   * New script memory.sh helps measuring the ROM and RAM requirements of two
     reduced configurations (PSK-CCM and NSA suite B).
   * Add config flag POLARSSL_DEPRECATED_WARNING (off by default) to produce
     warnings on use of deprecated functions (with GCC and Clang only).
   * Add config flag POLARSSL_DEPRECATED_REMOVED (off by default) to produce
     errors on use of deprecated functions.

Bugfix
   * Fix compile errors with PLATFORM_NO_STD_FUNCTIONS.
   * Fix compile error with PLATFORM_EXIT_ALT (thanks to Rafał Przywara).
   * Fix bug in entropy.c when THREADING_C is also enabled that caused
     entropy_free() to crash (thanks to Rafał Przywara).
   * Fix memory leak when gcm_setkey() and ccm_setkey() are used more than
     once on the same context.
   * Fix bug in ssl_mail_client when password is longer that username (found
     by Bruno Pape).
   * Fix undefined behaviour (memcmp( NULL, NULL, 0 );) in X.509 modules
     (detected by Clang's 3.6 UBSan).
   * mpi_size() and mpi_msb() would segfault when called on an mpi that is
     initialized but not set (found by pravic).
   * Fix detection of support for getrandom() on Linux (reported by syzzer) by
     doing it at runtime (using uname) rather that compile time.
   * Fix handling of symlinks by "make install" (found by Gaël PORTAY).
   * Fix potential NULL pointer dereference (not trigerrable remotely) when
     ssl_write() is called before the handshake is finished (introduced in
     1.3.10) (first reported by Martin Blumenstingl).
   * Fix bug in pk_parse_key() that caused some valid private EC keys to be
     rejected.
   * Fix bug in Via Padlock support (found by Nikos Mavrogiannopoulos).
   * Fix thread safety bug in RSA operations (found by Fredrik Axelsson).
   * Fix hardclock() (only used in the benchmarking program) with some
     versions of mingw64 (found by kxjhlele).
   * Fix warnings from mingw64 in timing.c (found by kxjklele).
   * Fix potential unintended sign extension in asn1_get_len() on 64-bit
     platforms.
   * Fix potential memory leak in ssl_set_psk() (found by Mansour Moufid).
   * Fix compile error when POLARSSL_SSL_DISABLE_RENEGOTATION and
     POLARSSL_SSL_SSESSION_TICKETS where both enabled in config.h (introduced
     in 1.3.10).
   * Add missing extern "C" guard in aesni.h (reported by amir zamani).
   * Add missing dependency on SHA-256 in some x509 programs (reported by
     Gergely Budai).
   * Fix bug related to ssl_set_curves(): the client didn't check that the
     curve picked by the server was actually allowed.

Changes
   * Remove bias in mpi_gen_prime (contributed by Pascal Junod).
   * Remove potential sources of timing variations (some contributed by Pascal
     Junod).
   * Options POLARSSL_HAVE_INT8 and POLARSSL_HAVE_INT16 are deprecated.
   * Enabling POLARSSL_NET_C without POLARSSL_HAVE_IPV6 is deprecated.
   * compat-1.2.h and openssl.h are deprecated.
   * Adjusting/overriding CFLAGS and LDFLAGS with the make build system is now
     more flexible (warning: OFLAGS is not used any more) (see the README)
     (contributed by Alon Bar-Lev).
   * ssl_set_own_cert() no longer calls pk_check_pair() since the
     performance impact was bad for some users (this was introduced in 1.3.10).
   * Move from SHA-1 to SHA-256 in example programs using signatures
     (suggested by Thorsten Mühlfelder).
   * Remove some unneeded inclusions of header files from the standard library
     "minimize" others (eg use stddef.h if only size_t is needed).
   * Change #include lines in test files to use double quotes instead of angle
     brackets for uniformity with the rest of the code.
   * Remove dependency on sscanf() in X.509 parsing modules.

= mbed TLS 1.3.10 released 2015-02-09
Security
   * NULL pointer dereference in the buffer-based allocator when the buffer is
     full and polarssl_free() is called (found by Mark Hasemeyer)
     (only possible if POLARSSL_MEMORY_BUFFER_ALLOC_C is enabled, which it is
     not by default).
   * Fix remotely-triggerable uninitialised pointer dereference caused by
     crafted X.509 certificate (TLS server is not affected if it doesn't ask for a
     client certificate) (found using Codenomicon Defensics).
   * Fix remotely-triggerable memory leak caused by crafted X.509 certificates
     (TLS server is not affected if it doesn't ask for a client certificate)
     (found using Codenomicon Defensics).
   * Fix potential stack overflow while parsing crafted X.509 certificates
     (TLS server is not affected if it doesn't ask for a client certificate)
     (found using Codenomicon Defensics).
   * Fix timing difference that could theoretically lead to a
     Bleichenbacher-style attack in the RSA and RSA-PSK key exchanges
     (reported by Sebastian Schinzel).

Features
   * Add support for FALLBACK_SCSV (draft-ietf-tls-downgrade-scsv).
   * Add support for Extended Master Secret (draft-ietf-tls-session-hash).
   * Add support for Encrypt-then-MAC (RFC 7366).
   * Add function pk_check_pair() to test if public and private keys match.
   * Add x509_crl_parse_der().
   * Add compile-time option POLARSSL_X509_MAX_INTERMEDIATE_CA to limit the
     length of an X.509 verification chain.
   * Support for renegotiation can now be disabled at compile-time
   * Support for 1/n-1 record splitting, a countermeasure against BEAST.
   * Certificate selection based on signature hash, preferring SHA-1 over SHA-2
     for pre-1.2 clients when multiple certificates are available.
   * Add support for getrandom() syscall on recent Linux kernels with Glibc or
     a compatible enough libc (eg uClibc).
   * Add ssl_set_arc4_support() to make it easier to disable RC4 at runtime
     while using the default ciphersuite list.
   * Added new error codes and debug messages about selection of
     ciphersuite/certificate.

Bugfix
   * Stack buffer overflow if ctr_drbg_update() is called with too large
     add_len (found by Jean-Philippe Aumasson) (not triggerable remotely).
   * Possible buffer overflow of length at most POLARSSL_MEMORY_ALIGN_MULTIPLE
     if memory_buffer_alloc_init() was called with buf not aligned and len not
     a multiple of POLARSSL_MEMORY_ALIGN_MULTIPLE (not triggerable remotely).
   * User set CFLAGS were ignored by Cmake with gcc (introduced in 1.3.9, found
     by Julian Ospald).
   * Fix potential undefined behaviour in Camellia.
   * Fix potential failure in ECDSA signatures when POLARSSL_ECP_MAX_BITS is a
     multiple of 8 (found by Gergely Budai).
   * Fix unchecked return code in x509_crt_parse_path() on Windows (found by
     Peter Vaskovic).
   * Fix assembly selection for MIPS64 (thanks to James Cowgill).
   * ssl_get_verify_result() now works even if the handshake was aborted due
     to a failed verification (found by Fredrik Axelsson).
   * Skip writing and parsing signature_algorithm extension if none of the
     key exchanges enabled needs certificates. This fixes a possible interop
     issue with some servers when a zero-length extension was sent. (Reported
     by Peter Dettman.)
   * On a 0-length input, base64_encode() did not correctly set output length
     (found by Hendrik van den Boogaard).

Changes
   * Use deterministic nonces for AEAD ciphers in TLS by default (possible to
     switch back to random with POLARSSL_SSL_AEAD_RANDOM_IV in config.h).
   * Blind RSA private operations even when POLARSSL_RSA_NO_CRT is defined.
   * ssl_set_own_cert() now returns an error on key-certificate mismatch.
   * Forbid repeated extensions in X.509 certificates.
   * debug_print_buf() now prints a text view in addition to hexadecimal.
   * A specific error is now returned when there are ciphersuites in common
     but none of them is usable due to external factors such as no certificate
     with a suitable (extended)KeyUsage or curve or no PSK set.
   * It is now possible to disable negotiation of truncated HMAC server-side
     at runtime with ssl_set_truncated_hmac().
   * Example programs for SSL client and server now disable SSLv3 by default.
   * Example programs for SSL client and server now disable RC4 by default.
   * Use platform.h in all test suites and programs.

= PolarSSL 1.3.9 released 2014-10-20
Security
   * Lowest common hash was selected from signature_algorithms extension in
     TLS 1.2 (found by Darren Bane) (introduced in 1.3.8).
   * Remotely-triggerable memory leak when parsing some X.509 certificates
     (server is not affected if it doesn't ask for a client certificate)
     (found using Codenomicon Defensics).
   * Remotely-triggerable memory leak when parsing crafted ClientHello
     (not affected if ECC support was compiled out) (found using Codenomicon
     Defensics).

Bugfix
   * Support escaping of commas in x509_string_to_names()
   * Fix compile error in ssl_pthread_server (found by Julian Ospald).
   * Fix net_accept() regarding non-blocking sockets (found by Luca Pesce).
   * Don't print uninitialised buffer in ssl_mail_client (found by Marc Abel).
   * Fix warnings from Clang's scan-build (contributed by Alfred Klomp).
   * Fix compile error in timing.c when POLARSSL_NET_C and POLARSSL_SELFTEST
     are defined but not POLARSSL_HAVE_TIME (found by Stephane Di Vito).
   * Remove non-existent file from VS projects (found by Peter Vaskovic).
   * ssl_read() could return non-application data records on server while
     renegotation was pending, and on client when a HelloRequest was received.
   * Server-initiated renegotiation would fail with non-blocking I/O if the
     write callback returned WANT_WRITE when requesting renegotiation.
   * ssl_close_notify() could send more than one message in some circumstances
     with non-blocking I/O.
   * Fix compiler warnings on iOS (found by Sander Niemeijer).
   * x509_crt_parse() did not increase total_failed on PEM error
   * Fix compile error with armcc in mpi_is_prime()
   * Fix potential bad read in parsing ServerHello (found by Adrien
     Vialletelle).

Changes
   * Ciphersuites using SHA-256 or SHA-384 now require TLS 1.x (there is no
     standard defining how to use SHA-2 with SSL 3.0).
   * Ciphersuites using RSA-PSK key exchange new require TLS 1.x (the spec is
     ambiguous on how to encode some packets with SSL 3.0).
   * Made buffer size in pk_write_(pub)key_pem() more dynamic, eg smaller if
     RSA is disabled, larger if POLARSSL_MPI_MAX_SIZE is larger.
   * ssl_read() now returns POLARSSL_ERR_NET_WANT_READ rather than
     POLARSSL_ERR_SSL_UNEXPECTED_MESSAGE on harmless alerts.
   * POLARSSL_MPI_MAX_SIZE now defaults to 1024 in order to allow 8192 bits
     RSA keys.
   * Accept spaces at end of line or end of buffer in base64_decode().
   * X.509 certificates with more than one AttributeTypeAndValue per
     RelativeDistinguishedName are not accepted any more.

= PolarSSL 1.3.8 released 2014-07-11
Security
   * Fix length checking for AEAD ciphersuites (found by Codenomicon).
     It was possible to crash the server (and client) using crafted messages
     when a GCM suite was chosen.

Features
   * Add CCM module and cipher mode to Cipher Layer
   * Support for CCM and CCM_8 ciphersuites
   * Support for parsing and verifying RSASSA-PSS signatures in the X.509
     modules (certificates, CRLs and CSRs).
   * Blowfish in the cipher layer now supports variable length keys.
   * Add example config.h for PSK with CCM, optimized for low RAM usage.
   * Optimize for RAM usage in example config.h for NSA Suite B profile.
   * Add POLARSSL_REMOVE_ARC4_CIPHERSUITES to allow removing RC4 ciphersuites
     from the default list (inactive by default).
   * Add server-side enforcement of sent renegotiation requests
     (ssl_set_renegotiation_enforced())
   * Add SSL_CIPHERSUITES config.h flag to allow specifying a list of
     ciphersuites to use and save some memory if the list is small.

Changes
   * Add LINK_WITH_PTHREAD option in CMake for explicit linking that is
     required on some platforms (e.g. OpenBSD)
   * Migrate zeroizing of data to polarssl_zeroize() instead of memset()
     against unwanted compiler optimizations
   * md_list() now returns hashes strongest first
   * Selection of hash for signing ServerKeyExchange in TLS 1.2 now picks
     strongest offered by client.
   * All public contexts have _init() and _free() functions now for simpler
     usage pattern

Bugfix
   * Fix in debug_print_msg()
   * Enforce alignment in the buffer allocator even if buffer is not aligned
   * Remove less-than-zero checks on unsigned numbers
   * Stricter check on SSL ClientHello internal sizes compared to actual packet
     size (found by TrustInSoft)
   * Fix WSAStartup() return value check (found by Peter Vaskovic)
   * Other minor issues (found by Peter Vaskovic)
   * Fix symlink command for cross compiling with CMake (found by Andre
     Heinecke)
   * Fix DER output of gen_key app (found by Gergely Budai)
   * Very small records were incorrectly rejected when truncated HMAC was in
     use with some ciphersuites and versions (RC4 in all versions, CBC with
     versions < TLS 1.1).
   * Very large records using more than 224 bytes of padding were incorrectly
     rejected with CBC-based ciphersuites and TLS >= 1.1
   * Very large records using less padding could cause a buffer overread of up
     to 32 bytes with CBC-based ciphersuites and TLS >= 1.1
   * Restore ability to use a v1 cert as a CA if trusted locally. (This had
     been removed in 1.3.6.)
   * Restore ability to locally trust a self-signed cert that is not a proper
     CA for use as an end entity certificate. (This had been removed in
     1.3.6.)
   * Fix preprocessor checks for bn_mul PPC asm (found by Barry K. Nathan).
   * Use \n\t rather than semicolons for bn_mul asm, since some assemblers
     interpret semicolons as comment delimiters (found by Barry K. Nathan).
   * Fix off-by-one error in parsing Supported Point Format extension that
     caused some handshakes to fail.
   * Fix possible miscomputation of the premaster secret with DHE-PSK key
     exchange that caused some handshakes to fail with other implementations.
     (Failure rate <= 1/255 with common DHM moduli.)
   * Disable broken Sparc64 bn_mul assembly (found by Florian Obser).
   * Fix base64_decode() to return and check length correctly (in case of
     tight buffers)
   * Fix mpi_write_string() to write "00" as hex output for empty MPI (found
     by Hui Dong)

= PolarSSL 1.3.7 released on 2014-05-02
Features
   * debug_set_log_mode() added to determine raw or full logging
   * debug_set_threshold() added to ignore messages over threshold level
   * version_check_feature() added to check for compile-time options at
     run-time

Changes
   * POLARSSL_CONFIG_OPTIONS has been removed. All values are individually
     checked and filled in the relevant module headers
   * Debug module only outputs full lines instead of parts
   * Better support for the different Attribute Types from IETF PKIX (RFC 5280)
   * AES-NI now compiles with "old" assemblers too
   * Ciphersuites based on RC4 now have the lowest priority by default

Bugfix
   * Only iterate over actual certificates in ssl_write_certificate_request()
     (found by Matthew Page)
   * Typos in platform.c and pkcs11.c (found by Daniel Phillips and Steffan
     Karger)
   * cert_write app should use subject of issuer certificate as issuer of cert
   * Fix false reject in padding check in ssl_decrypt_buf() for CBC
     ciphersuites, for full SSL frames of data.
   * Improve interoperability by not writing extension length in ClientHello /
     ServerHello when no extensions are present (found by Matthew Page)
   * rsa_check_pubkey() now allows an E up to N
   * On OpenBSD, use arc4random_buf() instead of rand() to prevent warnings
   * mpi_fill_random() was creating numbers larger than requested on
     big-endian platform when size was not an integer number of limbs
   * Fix dependencies issues in X.509 test suite.
   * Some parts of ssl_tls.c were compiled even when the module was disabled.
   * Fix detection of DragonflyBSD in net.c (found by Markus Pfeiffer)
   * Fix detection of Clang on some Apple platforms with CMake
     (found by Barry K. Nathan)

= PolarSSL 1.3.6 released on 2014-04-11

Features
   * Support for the ALPN SSL extension
   * Add option 'use_dev_random' to gen_key application
   * Enable verification of the keyUsage extension for CA and leaf
     certificates (POLARSSL_X509_CHECK_KEY_USAGE)
   * Enable verification of the extendedKeyUsage extension
     (POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE)

Changes
   * x509_crt_info() now prints information about parsed extensions as well
   * pk_verify() now returns a specific error code when the signature is valid
     but shorter than the supplied length.
   * Use UTC time to check certificate validity.
   * Reject certificates with times not in UTC, per RFC 5280.

Security
   * Avoid potential timing leak in ecdsa_sign() by blinding modular division.
     (Found by Watson Ladd.)
   * The notAfter date of some certificates was no longer checked since 1.3.5.
     This affects certificates in the user-supplied chain except the top
     certificate. If the user-supplied chain contains only one certificates,
     it is not affected (ie, its notAfter date is properly checked).
   * Prevent potential NULL pointer dereference in ssl_read_record() (found by
     TrustInSoft)

Bugfix
   * The length of various ClientKeyExchange messages was not properly checked.
   * Some example server programs were not sending the close_notify alert.
   * Potential memory leak in mpi_exp_mod() when error occurs during
     calculation of RR.
   * Fixed malloc/free default #define in platform.c (found by Gergely Budai).
   * Fixed type which made POLARSSL_ENTROPY_FORCE_SHA256 uneffective (found by
     Gergely Budai).
   * Fix #include path in ecdsa.h which wasn't accepted by some compilers.
     (found by Gergely Budai)
   * Fix compile errors when POLARSSL_ERROR_STRERROR_BC is undefined (found by
     Shuo Chen).
   * oid_get_numeric_string() used to truncate the output without returning an
     error if the output buffer was just 1 byte too small.
   * dhm_parse_dhm() (hence dhm_parse_dhmfile()) did not set dhm->len.
   * Calling pk_debug() on an RSA-alt key would segfault.
   * pk_get_size() and pk_get_len() were off by a factor 8 for RSA-alt keys.
   * Potential buffer overwrite in pem_write_buffer() because of low length
     indication (found by Thijs Alkemade)
   * EC curves constants, which should be only in ROM since 1.3.3, were also
     stored in RAM due to missing 'const's (found by Gergely Budai).

= PolarSSL 1.3.5 released on 2014-03-26
Features
   * HMAC-DRBG as a separate module
   * Option to set the Curve preference order (disabled by default)
   * Single Platform compatilibity layer (for memory / printf / fprintf)
   * Ability to provide alternate timing implementation
   * Ability to force the entropy module to use SHA-256 as its basis
     (POLARSSL_ENTROPY_FORCE_SHA256)
   * Testing script ssl-opt.sh added for testing 'live' ssl option
     interoperability against OpenSSL and PolarSSL
   * Support for reading EC keys that use SpecifiedECDomain in some cases.
   * Entropy module now supports seed writing and reading

Changes
   * Deprecated the Memory layer
   * entropy_add_source(), entropy_update_manual() and entropy_gather()
     now thread-safe if POLARSSL_THREADING_C defined
   * Improvements to the CMake build system, contributed by Julian Ospald.
   * Work around a bug of the version of Clang shipped by Apple with Mavericks
     that prevented bignum.c from compiling. (Reported by Rafael Baptista.)
   * Revamped the compat.sh interoperatibility script to include support for
     testing against GnuTLS
   * Deprecated ssl_set_own_cert_rsa() and ssl_set_own_cert_rsa_alt()
   * Improvements to tests/Makefile, contributed by Oden Eriksson.

Security
   * Forbid change of server certificate during renegotiation to prevent
     "triple handshake" attack when authentication mode is 'optional' (the
     attack was already impossible when authentication is required).
   * Check notBefore timestamp of certificates and CRLs from the future.
   * Forbid sequence number wrapping
   * Fixed possible buffer overflow with overlong PSK
   * Possible remotely-triggered out-of-bounds memory access fixed (found by
     TrustInSoft)

Bugfix
   * ecp_gen_keypair() does more tries to prevent failure because of
     statistics
   * Fixed bug in RSA PKCS#1 v1.5 "reversed" operations
   * Fixed testing with out-of-source builds using cmake
   * Fixed version-major intolerance in server
   * Fixed CMake symlinking on out-of-source builds
   * Fixed dependency issues in test suite
   * Programs rsa_sign_pss and rsa_verify_pss were not using PSS since 1.3.0
   * Bignum's MIPS-32 assembly was used on MIPS-64, causing chaos. (Found by
     Alex Wilson.)
   * ssl_cache was creating entries when max_entries=0 if TIMING_C was enabled.
   * m_sleep() was sleeping twice too long on most Unix platforms.
   * Fixed bug with session tickets and non-blocking I/O in the unlikely case
     send() would return an EAGAIN error when sending the ticket.
   * ssl_cache was leaking memory when reusing a timed out entry containing a
     client certificate.
   * ssl_srv was leaking memory when client presented a timed out ticket
     containing a client certificate
   * ssl_init() was leaving a dirty pointer in ssl_context if malloc of
     out_ctr failed
   * ssl_handshake_init() was leaving dirty pointers in subcontexts if malloc
     of one of them failed
   * Fix typo in rsa_copy() that impacted PKCS#1 v2 contexts
   * x509_get_current_time() uses localtime_r() to prevent thread issues

= PolarSSL 1.3.4 released on 2014-01-27
Features
   * Support for the Koblitz curves: secp192k1, secp224k1, secp256k1
   * Support for RIPEMD-160
   * Support for AES CFB8 mode
   * Support for deterministic ECDSA (RFC 6979)

Bugfix
   * Potential memory leak in bignum_selftest()
   * Replaced expired test certificate
   * ssl_mail_client now terminates lines with CRLF, instead of LF
   * net module handles timeouts on blocking sockets better (found by Tilman
     Sauerbeck)
   * Assembly format fixes in bn_mul.h

Security
   * Missing MPI_CHK calls added around unguarded mpi calls (found by
     TrustInSoft)

= PolarSSL 1.3.3 released on 2013-12-31
Features
   * EC key generation support in gen_key app
   * Support for adhering to client ciphersuite order preference
     (POLARSSL_SSL_SRV_RESPECT_CLIENT_PREFERENCE)
   * Support for Curve25519
   * Support for ECDH-RSA and ECDH-ECDSA key exchanges and ciphersuites
   * Support for IPv6 in the NET module
   * AES-NI support for AES, AES-GCM and AES key scheduling
   * SSL Pthread-based server example added (ssl_pthread_server)

Changes
   * gen_prime() speedup
   * Speedup of ECP multiplication operation
   * Relaxed some SHA2 ciphersuite's version requirements
   * Dropped use of readdir_r() instead of readdir() with threading support
   * More constant-time checks in the RSA module
   * Split off curves from ecp.c into ecp_curves.c
   * Curves are now stored fully in ROM
   * Memory usage optimizations in ECP module
   * Removed POLARSSL_THREADING_DUMMY

Bugfix
   * Fixed bug in mpi_set_bit() on platforms where t_uint is wider than int
   * Fixed X.509 hostname comparison (with non-regular characters)
   * SSL now gracefully handles missing RNG
   * Missing defines / cases for RSA_PSK key exchange
   * crypt_and_hash app checks MAC before final decryption
   * Potential memory leak in ssl_ticket_keys_init()
   * Memory leak in benchmark application
   * Fixed x509_crt_parse_path() bug on Windows platforms
   * Added missing MPI_CHK() around some statements in mpi_div_mpi() (found by
     TrustInSoft)
   * Fixed potential overflow in certificate size verification in
     ssl_write_certificate() (found by TrustInSoft)

Security
   * Possible remotely-triggered out-of-bounds memory access fixed (found by
     TrustInSoft)

= PolarSSL 1.3.2 released on 2013-11-04
Features
   * PK tests added to test framework
   * Added optional optimization for NIST MODP curves (POLARSSL_ECP_NIST_OPTIM)
   * Support for Camellia-GCM mode and ciphersuites

Changes
   * Padding checks in cipher layer are now constant-time
   * Value comparisons in SSL layer are now constant-time
   * Support for serialNumber, postalAddress and postalCode in X509 names
   * SSL Renegotiation was refactored

Bugfix
   * More stringent checks in cipher layer
   * Server does not send out extensions not advertised by client
   * Prevent possible alignment warnings on casting from char * to 'aligned *'
   * Misc fixes and additions to dependency checks
   * Const correctness
   * cert_write with selfsign should use issuer_name as subject_name
   * Fix ECDSA corner case: missing reduction mod N (found by DualTachyon)
   * Defines to handle UEFI environment under MSVC
   * Server-side initiated renegotiations send HelloRequest

= PolarSSL 1.3.1 released on 2013-10-15
Features
   * Support for Brainpool curves and TLS ciphersuites (RFC 7027)
   * Support for ECDHE-PSK key-exchange and ciphersuites
   * Support for RSA-PSK key-exchange and ciphersuites

Changes
   * RSA blinding locks for a smaller amount of time
   * TLS compression only allocates working buffer once
   * Introduced POLARSSL_HAVE_READDIR_R for systems without it
   * config.h is more script-friendly

Bugfix
   * Missing MSVC defines added
   * Compile errors with POLARSSL_RSA_NO_CRT
   * Header files with 'polarssl/'
   * Const correctness
   * Possible naming collision in dhm_context
   * Better support for MSVC
   * threading_set_alt() name
   * Added missing x509write_crt_set_version()

= PolarSSL 1.3.0 released on 2013-10-01
Features
   * Elliptic Curve Cryptography module added
   * Elliptic Curve Diffie Hellman module added
   * Ephemeral Elliptic Curve Diffie Hellman support for SSL/TLS
    (ECDHE-based ciphersuites)
   * Ephemeral Elliptic Curve Digital Signature Algorithm support for SSL/TLS
    (ECDSA-based ciphersuites)
   * Ability to specify allowed ciphersuites based on the protocol version.
   * PSK and DHE-PSK based ciphersuites added
   * Memory allocation abstraction layer added
   * Buffer-based memory allocator added (no malloc() / free() / HEAP usage)
   * Threading abstraction layer added (dummy / pthread / alternate)
   * Public Key abstraction layer added
   * Parsing Elliptic Curve keys
   * Parsing Elliptic Curve certificates
   * Support for max_fragment_length extension (RFC 6066)
   * Support for truncated_hmac extension (RFC 6066)
   * Support for zeros-and-length (ANSI X.923) padding, one-and-zeros
     (ISO/IEC 7816-4) padding and zero padding in the cipher layer
   * Support for session tickets (RFC 5077)
   * Certificate Request (CSR) generation with extensions (key_usage,
     ns_cert_type)
   * X509 Certificate writing with extensions (basic_constraints,
     issuer_key_identifier, etc)
   * Optional blinding for RSA, DHM and EC
   * Support for multiple active certificate / key pairs in SSL servers for
   	 the same host (Not to be confused with SNI!)

Changes
   * Ability to enable / disable SSL v3 / TLS 1.0 / TLS 1.1 / TLS 1.2
     individually
   * Introduced separate SSL Ciphersuites module that is based on
     Cipher and MD information
   * Internals for SSL module adapted to have separate IV pointer that is
     dynamically set (Better support for hardware acceleration)
   * Moved all OID functionality to a separate module. RSA function
     prototypes for the RSA sign and verify functions changed as a result
   * Split up the GCM module into a starts/update/finish cycle
   * Client and server now filter sent and accepted ciphersuites on minimum
     and maximum protocol version
   * Ability to disable server_name extension (RFC 6066)
   * Renamed error_strerror() to the less conflicting polarssl_strerror()
     (Ability to keep old as well with POLARSSL_ERROR_STRERROR_BC)
   * SHA2 renamed to SHA256, SHA4 renamed to SHA512 and functions accordingly
   * All RSA operations require a random generator for blinding purposes
   * X509 core refactored
   * x509_crt_verify() now case insensitive for cn (RFC 6125 6.4)
   * Also compiles / runs without time-based functions (!POLARSSL_HAVE_TIME)
   * Support faulty X509 v1 certificates with extensions
     (POLARSSL_X509_ALLOW_EXTENSIONS_NON_V3)

Bugfix
   * Fixed parse error in ssl_parse_certificate_request()
   * zlib compression/decompression skipped on empty blocks
   * Support for AIX header locations in net.c module
   * Fixed file descriptor leaks

Security
   * RSA blinding on CRT operations to counter timing attacks
     (found by Cyril Arnaud and Pierre-Alain Fouque)


= Version 1.2.14 released 2015-05-??

Security
   * Fix potential invalid memory read in the server, that allows a client to
     crash it remotely (found by Caj Larsson).
   * Fix potential invalid memory read in certificate parsing, that allows a
     client to crash the server remotely if client authentication is enabled
     (found using Codenomicon Defensics).
   * Add countermeasure against "Lucky 13 strikes back" cache-based attack,
     https://dl.acm.org/citation.cfm?id=2714625

Bugfix
   * Fix bug in Via Padlock support (found by Nikos Mavrogiannopoulos).
   * Fix hardclock() (only used in the benchmarking program) with some
     versions of mingw64 (found by kxjhlele).
   * Fix warnings from mingw64 in timing.c (found by kxjklele).
   * Fix potential unintended sign extension in asn1_get_len() on 64-bit
     platforms (found with Coverity Scan).

= Version 1.2.13 released 2015-02-16
Note: Although PolarSSL has been renamed to mbed TLS, no changes reflecting
      this will be made in the 1.2 branch at this point.

Security
   * Fix remotely-triggerable uninitialised pointer dereference caused by
     crafted X.509 certificate (TLS server is not affected if it doesn't ask
     for a client certificate) (found using Codenomicon Defensics).
   * Fix remotely-triggerable memory leak caused by crafted X.509 certificates
     (TLS server is not affected if it doesn't ask for a client certificate)
     (found using Codenomicon Defensics).
   * Fix potential stack overflow while parsing crafted X.509 certificates
     (TLS server is not affected if it doesn't ask for a client certificate)
     found using Codenomicon Defensics).
   * Fix buffer overread of size 1 when parsing crafted X.509 certificates
     (TLS server is not affected if it doesn't ask for a client certificate).

Bugfix
   * Fix potential undefined behaviour in Camellia.
   * Fix memory leaks in PKCS#5 and PKCS#12.
   * Stack buffer overflow if ctr_drbg_update() is called with too large
     add_len (found by Jean-Philippe Aumasson) (not triggerable remotely).
   * Fix bug in MPI/bignum on s390/s390x (reported by Dan Horák) (introduced
     in 1.2.12).
   * Fix unchecked return code in x509_crt_parse_path() on Windows (found by
     Peter Vaskovic).
   * Fix assembly selection for MIPS64 (thanks to James Cowgill).
   * ssl_get_verify_result() now works even if the handshake was aborted due
     to a failed verification (found by Fredrik Axelsson).
   * Skip writing and parsing signature_algorithm extension if none of the
     key exchanges enabled needs certificates. This fixes a possible interop
     issue with some servers when a zero-length extension was sent. (Reported
     by Peter Dettman.)
   * On a 0-length input, base64_encode() did not correctly set output length
     (found by Hendrik van den Boogaard).

Changes
   * Blind RSA private operations even when POLARSSL_RSA_NO_CRT is defined.
   * Forbid repeated extensions in X.509 certificates.
   * Add compile-time option POLARSSL_X509_MAX_INTERMEDIATE_CA to limit the
     length of an X.509 verification chain (default = 8).
= Version 1.2.12 released 2014-10-24

Security
   * Remotely-triggerable memory leak when parsing some X.509 certificates
     (server is not affected if it doesn't ask for a client certificate).
     (Found using Codenomicon Defensics.)

Bugfix
   * Fix potential bad read in parsing ServerHello (found by Adrien
     Vialletelle).
   * ssl_close_notify() could send more than one message in some circumstances
     with non-blocking I/O.
   * x509_crt_parse() did not increase total_failed on PEM error
   * Fix compiler warnings on iOS (found by Sander Niemeijer).
   * Don't print uninitialised buffer in ssl_mail_client (found by Marc Abel).
   * Fix net_accept() regarding non-blocking sockets (found by Luca Pesce).
   * ssl_read() could return non-application data records on server while
     renegotation was pending, and on client when a HelloRequest was received.
   * Fix warnings from Clang's scan-build (contributed by Alfred Klomp).

Changes
   * X.509 certificates with more than one AttributeTypeAndValue per
     RelativeDistinguishedName are not accepted any more.
   * ssl_read() now returns POLARSSL_ERR_NET_WANT_READ rather than
     POLARSSL_ERR_SSL_UNEXPECTED_MESSAGE on harmless alerts.
   * Accept spaces at end of line or end of buffer in base64_decode().

= Version 1.2.11 released 2014-07-11
Features
   * Entropy module now supports seed writing and reading

Changes
   * Introduced POLARSSL_HAVE_READDIR_R for systems without it
   * Improvements to the CMake build system, contributed by Julian Ospald.
   * Work around a bug of the version of Clang shipped by Apple with Mavericks
     that prevented bignum.c from compiling. (Reported by Rafael Baptista.)
   * Improvements to tests/Makefile, contributed by Oden Eriksson.
   * Use UTC time to check certificate validity.
   * Reject certificates with times not in UTC, per RFC 5280.
   * Migrate zeroizing of data to polarssl_zeroize() instead of memset()
     against unwanted compiler optimizations

Security
   * Forbid change of server certificate during renegotiation to prevent
     "triple handshake" attack when authentication mode is optional (the
     attack was already impossible when authentication is required).
   * Check notBefore timestamp of certificates and CRLs from the future.
   * Forbid sequence number wrapping
   * Prevent potential NULL pointer dereference in ssl_read_record() (found by
     TrustInSoft)
   * Fix length checking for AEAD ciphersuites (found by Codenomicon).
     It was possible to crash the server (and client) using crafted messages
     when a GCM suite was chosen.

Bugfix
   * Fixed X.509 hostname comparison (with non-regular characters)
   * SSL now gracefully handles missing RNG
   * crypt_and_hash app checks MAC before final decryption
   * Fixed x509_crt_parse_path() bug on Windows platforms
   * Added missing MPI_CHK() around some statements in mpi_div_mpi() (found by
     TrustInSoft)
   * Fixed potential overflow in certificate size verification in
     ssl_write_certificate() (found by TrustInSoft)
   * Fix ASM format in bn_mul.h
   * Potential memory leak in bignum_selftest()
   * Replaced expired test certificate
   * ssl_mail_client now terminates lines with CRLF, instead of LF
   * Fix bug in RSA PKCS#1 v1.5 "reversed" operations
   * Fixed testing with out-of-source builds using cmake
   * Fixed version-major intolerance in server
   * Fixed CMake symlinking on out-of-source builds
   * Bignum's MIPS-32 assembly was used on MIPS-64, causing chaos. (Found by
     Alex Wilson.)
   * ssl_init() was leaving a dirty pointer in ssl_context if malloc of
     out_ctr failed
   * ssl_handshake_init() was leaving dirty pointers in subcontexts if malloc
     of one of them failed
   * x509_get_current_time() uses localtime_r() to prevent thread issues
   * Some example server programs were not sending the close_notify alert.
   * Potential memory leak in mpi_exp_mod() when error occurs during
     calculation of RR.
   * Improve interoperability by not writing extension length in ClientHello
     when no extensions are present (found by Matthew Page)
   * rsa_check_pubkey() now allows an E up to N
   * On OpenBSD, use arc4random_buf() instead of rand() to prevent warnings
   * mpi_fill_random() was creating numbers larger than requested on
     big-endian platform when size was not an integer number of limbs
   * Fix detection of DragonflyBSD in net.c (found by Markus Pfeiffer)
   * Stricter check on SSL ClientHello internal sizes compared to actual packet
     size (found by TrustInSoft)
   * Fix preprocessor checks for bn_mul PPC asm (found by Barry K. Nathan).
   * Use \n\t rather than semicolons for bn_mul asm, since some assemblers
     interpret semicolons as comment delimiters (found by Barry K. Nathan).
   * Disable broken Sparc64 bn_mul assembly (found by Florian Obser).
   * Fix base64_decode() to return and check length correctly (in case of
     tight buffers)

= Version 1.2.10 released 2013-10-07
Changes
   * Changed RSA blinding to a slower but thread-safe version

Bugfix
   * Fixed memory leak in RSA as a result of introduction of blinding
   * Fixed ssl_pkcs11_decrypt() prototype
   * Fixed MSVC project files

= Version 1.2.9 released 2013-10-01
Changes
   * x509_verify() now case insensitive for cn (RFC 6125 6.4)

Bugfix
   * Fixed potential memory leak when failing to resume a session
   * Fixed potential file descriptor leaks (found by Remi Gacogne)
   * Minor fixes

Security
   * Fixed potential heap buffer overflow on large hostname setting
   * Fixed potential negative value misinterpretation in load_file()
   * RSA blinding on CRT operations to counter timing attacks
     (found by Cyril Arnaud and Pierre-Alain Fouque)

= Version 1.2.8 released 2013-06-19
Features
   * Parsing of PKCS#8 encrypted private key files
   * PKCS#12 PBE and derivation functions
   * Centralized module option values in config.h to allow user-defined
     settings without editing header files by using POLARSSL_CONFIG_OPTIONS

Changes
   * HAVEGE random generator disabled by default
   * Internally split up x509parse_key() into a (PEM) handler function
     and specific DER parser functions for the PKCS#1 and unencrypted
     PKCS#8 private key formats
   * Added mechanism to provide alternative implementations for all
     symmetric cipher and hash algorithms (e.g. POLARSSL_AES_ALT in
	 config.h)
   * PKCS#5 module added. Moved PBKDF2 functionality inside and deprecated
     old PBKDF2 module

Bugfix
   * Secure renegotiation extension should only be sent in case client
     supports secure renegotiation
   * Fixed offset for cert_type list in ssl_parse_certificate_request()
   * Fixed const correctness issues that have no impact on the ABI
   * x509parse_crt() now better handles PEM error situations
   * ssl_parse_certificate() now calls x509parse_crt_der() directly
     instead of the x509parse_crt() wrapper that can also parse PEM
	 certificates
   * x509parse_crtpath() is now reentrant and uses more portable stat()
   * Fixed bignum.c and bn_mul.h to support Thumb2 and LLVM compiler
   * Fixed values for 2-key Triple DES in cipher layer
   * ssl_write_certificate_request() can handle empty ca_chain

Security
   * A possible DoS during the SSL Handshake, due to faulty parsing of
     PEM-encoded certificates has been fixed (found by Jack Lloyd)

= Version 1.2.7 released 2013-04-13
Features
   * Ability to specify allowed ciphersuites based on the protocol version.

Changes
   * Default Blowfish keysize is now 128-bits
   * Test suites made smaller to accommodate Raspberry Pi

Bugfix
   * Fix for MPI assembly for ARM
   * GCM adapted to support sizes > 2^29

= Version 1.2.6 released 2013-03-11
Bugfix
   * Fixed memory leak in ssl_free() and ssl_reset() for active session
   * Corrected GCM counter incrementation to use only 32-bits instead of
     128-bits (found by Yawning Angel)
   * Fixes for 64-bit compilation with MS Visual Studio
   * Fixed net_bind() for specified IP addresses on little endian systems
   * Fixed assembly code for ARM (Thumb and regular) for some compilers

Changes
   * Internally split up rsa_pkcs1_encrypt(), rsa_pkcs1_decrypt(),
     rsa_pkcs1_sign() and rsa_pkcs1_verify() to separate PKCS#1 v1.5 and
     PKCS#1 v2.1 functions
   * Added support for custom labels when using rsa_rsaes_oaep_encrypt()
     or rsa_rsaes_oaep_decrypt()
   * Re-added handling for SSLv2 Client Hello when the define
     POLARSSL_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO is set
   * The SSL session cache module (ssl_cache) now also retains peer_cert
     information (not the entire chain)

Security
   * Removed further timing differences during SSL message decryption in
     ssl_decrypt_buf()
   * Removed timing differences due to bad padding from
     rsa_rsaes_pkcs1_v15_decrypt() and rsa_pkcs1_decrypt() for PKCS#1 v1.5
     operations

= Version 1.2.5 released 2013-02-02
Changes
   * Allow enabling of dummy error_strerror() to support some use-cases
   * Debug messages about padding errors during SSL message decryption are
     disabled by default and can be enabled with POLARSSL_SSL_DEBUG_ALL
   * Sending of security-relevant alert messages that do not break
     interoperability can be switched on/off with the flag
     POLARSSL_SSL_ALL_ALERT_MESSAGES

Security
   * Removed timing differences during SSL message decryption in
     ssl_decrypt_buf() due to badly formatted padding

= Version 1.2.4 released 2013-01-25
Changes
   * More advanced SSL ciphersuite representation and moved to more dynamic
     SSL core
   * Added ssl_handshake_step() to allow single stepping the handshake process

Bugfix
   * Memory leak when using RSA_PKCS_V21 operations fixed
   * Handle future version properly in ssl_write_certificate_request()
   * Correctly handle CertificateRequest message in client for <= TLS 1.1
     without DN list

= Version 1.2.3 released 2012-11-26
Bugfix
   * Server not always sending correct CertificateRequest message

= Version 1.2.2 released 2012-11-24
Changes
   * Added p_hw_data to ssl_context for context specific hardware acceleration
     data
   * During verify trust-CA is only checked for expiration and CRL presence

Bugfixes
   * Fixed client authentication compatibility
   * Fixed dependency on POLARSSL_SHA4_C in SSL modules

= Version 1.2.1 released 2012-11-20
Changes
   * Depth that the certificate verify callback receives is now numbered
     bottom-up (Peer cert depth is 0)

Bugfixes
   * Fixes for MSVC6
   * Moved mpi_inv_mod() outside POLARSSL_GENPRIME
   * Allow R and A to point to same mpi in mpi_div_mpi (found by Manuel
     Pégourié-Gonnard)
   * Fixed possible segfault in mpi_shift_r() (found by Manuel
     Pégourié-Gonnard)
   * Added max length check for rsa_pkcs1_sign with PKCS#1 v2.1

= Version 1.2.0 released 2012-10-31
Features
   * Added support for NULL cipher (POLARSSL_CIPHER_NULL_CIPHER) and weak
     ciphersuites (POLARSSL_ENABLE_WEAK_CIPHERSUITES). They are disabled by
     default!
   * Added support for wildcard certificates
   * Added support for multi-domain certificates through the X509 Subject
     Alternative Name extension
   * Added preliminary ASN.1 buffer writing support
   * Added preliminary X509 Certificate Request writing support
   * Added key_app_writer example application
   * Added cert_req example application
   * Added base Galois Counter Mode (GCM) for AES
   * Added TLS 1.2 support (RFC 5246)
   * Added GCM suites to TLS 1.2 (RFC 5288)
   * Added commandline error code convertor (util/strerror)
   * Added support for Hardware Acceleration hooking in SSL/TLS
   * Added OpenSSL / PolarSSL compatibility script (tests/compat.sh) and
     example application (programs/ssl/o_p_test) (requires OpenSSL)
   * Added X509 CA Path support
   * Added Thumb assembly optimizations
   * Added DEFLATE compression support as per RFC3749 (requires zlib)
   * Added blowfish algorithm (Generic and cipher layer)
   * Added PKCS#5 PBKDF2 key derivation function
   * Added Secure Renegotiation (RFC 5746)
   * Added predefined DHM groups from RFC 5114
   * Added simple SSL session cache implementation
   * Added ServerName extension parsing (SNI) at server side
   * Added option to add minimum accepted SSL/TLS protocol version

Changes
   * Removed redundant POLARSSL_DEBUG_MSG define
   * AES code only check for Padlock once
   * Fixed const-correctness mpi_get_bit()
   * Documentation for mpi_lsb() and mpi_msb()
   * Moved out_msg to out_hdr + 32 to support hardware acceleration
   * Changed certificate verify behaviour to comply with RFC 6125 section 6.3
     to not match CN if subjectAltName extension is present (Closes ticket #56)
   * Cipher layer cipher_mode_t POLARSSL_MODE_CFB128 is renamed to
     POLARSSL_MODE_CFB, to also handle different block size CFB modes.
   * Removed handling for SSLv2 Client Hello (as per RFC 5246 recommendation)
   * Revamped session resumption handling
   * Generalized external private key implementation handling (like PKCS#11)
     in SSL/TLS
   * Revamped x509_verify() and the SSL f_vrfy callback implementations
   * Moved from unsigned long to fixed width uint32_t types throughout code
   * Renamed ciphersuites naming scheme to IANA reserved names

Bugfix
   * Fixed handling error in mpi_cmp_mpi() on longer B values (found by
     Hui Dong)
   * Fixed potential heap corruption in x509_name allocation
   * Fixed single RSA test that failed on Big Endian systems (Closes ticket #54)
   * mpi_exp_mod() now correctly handles negative base numbers (Closes ticket
     #52)
   * Handle encryption with private key and decryption with public key as per
   	 RFC 2313
   * Handle empty certificate subject names
   * Prevent reading over buffer boundaries on X509 certificate parsing
   * mpi_add_abs() now correctly handles adding short numbers to long numbers
     with carry rollover (found by Ruslan Yushchenko)
   * Handle existence of OpenSSL Trust Extensions at end of X.509 DER blob
   * Fixed MPI assembly for SPARC64 platform

Security
   * Fixed potential memory zeroization on miscrafted RSA key (found by Eloi
     Vanderbeken)

= Version 1.1.8 released on 2013-10-01
Bugfix
   * Fixed potential memory leak when failing to resume a session
   * Fixed potential file descriptor leaks

Security
   * Potential buffer-overflow for ssl_read_record() (independently found by
     both TrustInSoft and Paul Brodeur of Leviathan Security Group)
   * Potential negative value misinterpretation in load_file()
   * Potential heap buffer overflow on large hostname setting

= Version 1.1.7 released on 2013-06-19
Changes
   * HAVEGE random generator disabled by default

Bugfix
   * x509parse_crt() now better handles PEM error situations
   * ssl_parse_certificate() now calls x509parse_crt_der() directly
     instead of the x509parse_crt() wrapper that can also parse PEM
	 certificates
   * Fixed values for 2-key Triple DES in cipher layer
   * ssl_write_certificate_request() can handle empty ca_chain

Security
   * A possible DoS during the SSL Handshake, due to faulty parsing of
     PEM-encoded certificates has been fixed (found by Jack Lloyd)

= Version 1.1.6 released on 2013-03-11
Bugfix
   * Fixed net_bind() for specified IP addresses on little endian systems

Changes
   * Allow enabling of dummy error_strerror() to support some use-cases
   * Debug messages about padding errors during SSL message decryption are
     disabled by default and can be enabled with POLARSSL_SSL_DEBUG_ALL

Security
   * Removed timing differences during SSL message decryption in
     ssl_decrypt_buf()
   * Removed timing differences due to bad padding from
     rsa_rsaes_pkcs1_v15_decrypt() and rsa_pkcs1_decrypt() for PKCS#1 v1.5
     operations

= Version 1.1.5 released on 2013-01-16
Bugfix
   * Fixed MPI assembly for SPARC64 platform
   * Handle existence of OpenSSL Trust Extensions at end of X.509 DER blob
   * mpi_add_abs() now correctly handles adding short numbers to long numbers
     with carry rollover
   * Moved mpi_inv_mod() outside POLARSSL_GENPRIME
   * Prevent reading over buffer boundaries on X509 certificate parsing
   * mpi_exp_mod() now correctly handles negative base numbers (Closes ticket
     #52)
   * Fixed possible segfault in mpi_shift_r() (found by Manuel
     Pégourié-Gonnard)
   * Allow R and A to point to same mpi in mpi_div_mpi (found by Manuel
     Pégourié-Gonnard)
   * Added max length check for rsa_pkcs1_sign with PKCS#1 v2.1
   * Memory leak when using RSA_PKCS_V21 operations fixed
   * Handle encryption with private key and decryption with public key as per
     RFC 2313
   * Fixes for MSVC6

Security
   * Fixed potential memory zeroization on miscrafted RSA key (found by Eloi
     Vanderbeken)

= Version 1.1.4 released on 2012-05-31
Bugfix
   * Correctly handle empty SSL/TLS packets (Found by James Yonan)
   * Fixed potential heap corruption in x509_name allocation
   * Fixed single RSA test that failed on Big Endian systems (Closes ticket #54)

= Version 1.1.3 released on 2012-04-29
Bugfix
   * Fixed random MPI generation to not generate more size than requested.

= Version 1.1.2 released on 2012-04-26
Bugfix
   * Fixed handling error in mpi_cmp_mpi() on longer B values (found by
     Hui Dong)

Security
   * Fixed potential memory corruption on miscrafted client messages (found by
     Frama-C team at CEA LIST)
   * Fixed generation of DHM parameters to correct length (found by Ruslan
     Yushchenko)

= Version 1.1.1 released on 2012-01-23
Bugfix
   * Check for failed malloc() in ssl_set_hostname() and x509_get_entries()
     (Closes ticket #47, found by Hugo Leisink)
   * Fixed issues with Intel compiler on 64-bit systems (Closes ticket #50)
   * Fixed multiple compiler warnings for VS6 and armcc
   * Fixed bug in CTR_CRBG selftest

= Version 1.1.0 released on 2011-12-22
Features
   * Added ssl_session_reset() to allow better multi-connection pools of
     SSL contexts without needing to set all non-connection-specific
	 data and pointers again. Adapted ssl_server to use this functionality.
   * Added ssl_set_max_version() to allow clients to offer a lower maximum
     supported version to a server to help buggy server implementations.
	 (Closes ticket #36)
   * Added cipher_get_cipher_mode() and cipher_get_cipher_operation()
     introspection functions (Closes ticket #40)
   * Added CTR_DRBG based on AES-256-CTR (NIST SP 800-90) random generator
   * Added a generic entropy accumulator that provides support for adding
     custom entropy sources and added some generic and platform dependent
	 entropy sources

Changes
   * Documentation for AES and Camellia in modes CTR and CFB128 clarified.
   * Fixed rsa_encrypt and rsa_decrypt examples to use public key for
     encryption and private key for decryption. (Closes ticket #34)
   * Inceased maximum size of ASN1 length reads to 32-bits.
   * Added an EXPLICIT tag number parameter to x509_get_ext()
   * Added a separate CRL entry extension parsing function
   * Separated the ASN.1 parsing code from the X.509 specific parsing code.
     So now there is a module that is controlled with POLARSSL_ASN1_PARSE_C.
   * Changed the defined key-length of DES ciphers in cipher.h to include the
     parity bits, to prevent mistakes in copying data. (Closes ticket #33)
   * Loads of minimal changes to better support WINCE as a build target
     (Credits go to Marco Lizza)
   * Added POLARSSL_MPI_WINDOW_SIZE definition to allow easier time to memory
     trade-off
   * Introduced POLARSSL_MPI_MAX_SIZE and POLARSSL_MPI_MAX_BITS for MPI size
     management (Closes ticket #44)
   * Changed the used random function pointer to more flexible format. Renamed
     havege_rand() to havege_random() to prevent mistakes. Lots of changes as
     a consequence in library code and programs
   * Moved all examples programs to use the new entropy and CTR_DRBG
   * Added permissive certificate parsing to x509parse_crt() and
     x509parse_crtfile(). With permissive parsing the parsing does not stop on
     encountering a parse-error. Beware that the meaning of return values has
     changed!
   * All error codes are now negative. Even on mermory failures and IO errors.

Bugfix
   * Fixed faulty HMAC-MD2 implementation. Found by dibac. (Closes
     ticket #37)
   * Fixed a bug where the CRL parser expected an EXPLICIT ASN.1 tag
     before version numbers
   * Allowed X509 key usage parsing to accept 4 byte values instead of the
     standard 1 byte version sometimes used by Microsoft. (Closes ticket #38)
   * Fixed incorrect behaviour in case of RSASSA-PSS with a salt length
     smaller than the hash length. (Closes ticket #41)
   * If certificate serial is longer than 32 octets, serial number is now
     appended with '....' after first 28 octets
   * Improved build support for s390x and sparc64 in bignum.h
   * Fixed MS Visual C++ name clash with int64 in sha4.h
   * Corrected removal of leading "00:" in printing serial numbers in
     certificates and CRLs

= Version 1.0.0 released on 2011-07-27
Features
   * Expanded cipher layer with support for CFB128 and CTR mode
   * Added rsa_encrypt and rsa_decrypt simple example programs.

Changes
   * The generic cipher and message digest layer now have normal error
     codes instead of integers

Bugfix
   * Undid faulty bug fix in ssl_write() when flushing old data (Ticket
     #18)

= Version 0.99-pre5 released on 2011-05-26
Features
   * Added additional Cipher Block Modes to symmetric ciphers
     (AES CTR, Camellia CTR, XTEA CBC) including the option to
     enable and disable individual modes when needed
   * Functions requiring File System functions can now be disabled
     by undefining POLARSSL_FS_IO
   * A error_strerror function() has been added to translate between
     error codes and their description.
   * Added mpi_get_bit() and mpi_set_bit() individual bit setter/getter
     functions.
   * Added ssl_mail_client and ssl_fork_server as example programs.

Changes
   * Major argument / variable rewrite. Introduced use of size_t
     instead of int for buffer lengths and loop variables for
     better unsigned / signed use. Renamed internal bigint types
     t_int and t_dbl to t_uint and t_udbl in the process
   * mpi_init() and mpi_free() now only accept a single MPI
     argument and do not accept variable argument lists anymore.
   * The error codes have been remapped and combining error codes
     is now done with a PLUS instead of an OR as error codes
     used are negative.
   * Changed behaviour of net_read(), ssl_fetch_input() and ssl_recv().
     net_recv() now returns 0 on EOF instead of
     POLARSSL_ERR_NET_CONN_RESET. ssl_fetch_input() returns
     POLARSSL_ERR_SSL_CONN_EOF on an EOF from its f_recv() function.
     ssl_read() returns 0 if a POLARSSL_ERR_SSL_CONN_EOF is received
     after the handshake.
   * Network functions now return POLARSSL_ERR_NET_WANT_READ or
     POLARSSL_ERR_NET_WANT_WRITE instead of the ambiguous
     POLARSSL_ERR_NET_TRY_AGAIN

= Version 0.99-pre4 released on 2011-04-01
Features
   * Added support for PKCS#1 v2.1 encoding and thus support
     for the RSAES-OAEP and RSASSA-PSS operations.
   * Reading of Public Key files incorporated into default x509
     functionality as well.
   * Added mpi_fill_random() for centralized filling of big numbers
     with random data (Fixed ticket #10)

Changes
   * Debug print of MPI now removes leading zero octets and
     displays actual bit size of the value.
   * x509parse_key() (and as a consequence x509parse_keyfile())
     does not zeroize memory in advance anymore. Use rsa_init()
     before parsing a key or keyfile!

Bugfix
   * Debug output of MPI's now the same independent of underlying
     platform (32-bit / 64-bit) (Fixes ticket #19, found by Mads
     Kiilerich and Mihai Militaru)
   * Fixed bug in ssl_write() when flushing old data (Fixed ticket
     #18, found by Nikolay Epifanov)
   * Fixed proper handling of RSASSA-PSS verification with variable
     length salt lengths

= Version 0.99-pre3 released on 2011-02-28
This release replaces version 0.99-pre2 which had possible copyright issues.
Features
   * Parsing PEM private keys encrypted with DES and AES
     are now supported as well (Fixes ticket #5)
   * Added crl_app program to allow easy reading and
     printing of X509 CRLs from file

Changes
   * Parsing of PEM files moved to separate module (Fixes
     ticket #13). Also possible to remove PEM support for
     systems only using DER encoding

Bugfixes
   * Corrected parsing of UTCTime dates before 1990 and
     after 1950
   * Support more exotic OID's when parsing certificates
   	 (found by Mads Kiilerich)
   * Support more exotic name representations when parsing
     certificates (found by Mads Kiilerich)
   * Replaced the expired test certificates
   * Do not bail out if no client certificate specified. Try
     to negotiate anonymous connection (Fixes ticket #12,
     found by Boris Krasnovskiy)

Security fixes
   * Fixed a possible Man-in-the-Middle attack on the
     Diffie Hellman key exchange (thanks to Larry Highsmith,
     Subreption LLC)

= Version 0.99-pre1 released on 2011-01-30
Features
Note: Most of these features have been donated by Fox-IT
   * Added Doxygen source code documentation parts
   * Added reading of DHM context from memory and file
   * Improved X509 certificate parsing to include extended
     certificate fields, including Key Usage
   * Improved certificate verification and verification
     against the available CRLs
   * Detection for DES weak keys and parity bits added
   * Improvements to support integration in other
     applications:
       + Added generic message digest and cipher wrapper
       + Improved information about current capabilities,
         status, objects and configuration
       + Added verification callback on certificate chain
         verification to allow external blacklisting
	   + Additional example programs to show usage
   * Added support for PKCS#11 through the use of the
     libpkcs11-helper library

Changes
   * x509parse_time_expired() checks time in addition to
     the existing date check
   * The ciphers member of ssl_context and the cipher member
     of ssl_session have been renamed to ciphersuites and
     ciphersuite respectively. This clarifies the difference
     with the generic cipher layer and is better naming
     altogether

= Version 0.14.0 released on 2010-08-16
Features
   * Added support for SSL_EDH_RSA_AES_128_SHA and
     SSL_EDH_RSA_CAMELLIA_128_SHA ciphersuites
   * Added compile-time and run-time version information
   * Expanded ssl_client2 arguments for more flexibility
   * Added support for TLS v1.1

Changes
   * Made Makefile cleaner
   * Removed dependency on rand() in rsa_pkcs1_encrypt().
     Now using random fuction provided to function and
     changed the prototype of rsa_pkcs1_encrypt(),
     rsa_init() and rsa_gen_key().
   * Some SSL defines were renamed in order to avoid
     future confusion

Bug fixes
   * Fixed CMake out of source build for tests (found by
     kkert)
   * rsa_check_private() now supports PKCS1v2 keys as well
   * Fixed deadlock in rsa_pkcs1_encrypt() on failing random
     generator

= Version 0.13.1 released on 2010-03-24
Bug fixes
   * Fixed Makefile in library that was mistakenly merged
   * Added missing const string fixes

= Version 0.13.0 released on 2010-03-21
Features
   * Added option parsing for host and port selection to
     ssl_client2
   * Added support for GeneralizedTime in X509 parsing
   * Added cert_app program to allow easy reading and
     printing of X509 certificates from file or SSL
     connection.

Changes
   * Added const correctness for main code base
   * X509 signature algorithm determination is now
     in a function to allow easy future expansion
   * Changed symmetric cipher functions to
     identical interface (returning int result values)
   * Changed ARC4 to use separate input/output buffer
   * Added reset function for HMAC context as speed-up
     for specific use-cases

Bug fixes
   * Fixed bug resulting in failure to send the last
     certificate in the chain in ssl_write_certificate() and
     ssl_write_certificate_request() (found by fatbob)
   * Added small fixes for compiler warnings on a Mac
     (found by Frank de Brabander)
   * Fixed algorithmic bug in mpi_is_prime() (found by
     Smbat Tonoyan)

= Version 0.12.1 released on 2009-10-04
Changes
   * Coverage test definitions now support 'depends_on'
     tagging system.
   * Tests requiring specific hashing algorithms now honor
     the defines.

Bug fixes
   * Changed typo in #ifdef in x509parse.c (found
     by Eduardo)

= Version 0.12.0 released on 2009-07-28
Features
   * Added CMake makefiles as alternative to regular Makefiles.
   * Added preliminary Code Coverage tests for AES, ARC4,
     Base64, MPI, SHA-family, MD-family, HMAC-SHA-family,
     Camellia, DES, 3-DES, RSA PKCS#1, XTEA, Diffie-Hellman
     and X509parse.

Changes
   * Error codes are not (necessarily) negative. Keep
     this is mind when checking for errors.
   * RSA_RAW renamed to SIG_RSA_RAW for consistency.
   * Fixed typo in name of POLARSSL_ERR_RSA_OUTPUT_TOO_LARGE.
   * Changed interface for AES and Camellia setkey functions
     to indicate invalid key lengths.

Bug fixes
   * Fixed include location of endian.h on FreeBSD (found by
     Gabriel)
   * Fixed include location of endian.h and name clash on
     Apples (found by Martin van Hensbergen)
   * Fixed HMAC-MD2 by modifying md2_starts(), so that the
     required HMAC ipad and opad variables are not cleared.
     (found by code coverage tests)
   * Prevented use of long long in bignum if
     POLARSSL_HAVE_LONGLONG not defined (found by Giles
     Bathgate).
   * Fixed incorrect handling of negative strings in
     mpi_read_string() (found by code coverage tests).
   * Fixed segfault on handling empty rsa_context in
     rsa_check_pubkey() and rsa_check_privkey() (found by
     code coverage tests).
   * Fixed incorrect handling of one single negative input
     value in mpi_add_abs() (found by code coverage tests).
   * Fixed incorrect handling of negative first input
     value in mpi_sub_abs() (found by code coverage tests).
   * Fixed incorrect handling of negative first input
     value in mpi_mod_mpi() and mpi_mod_int(). Resulting
     change also affects mpi_write_string() (found by code
     coverage tests).
   * Corrected is_prime() results for 0, 1 and 2 (found by
     code coverage tests).
   * Fixed Camellia and XTEA for 64-bit Windows systems.

= Version 0.11.1 released on 2009-05-17
   * Fixed missing functionality for SHA-224, SHA-256, SHA384,
     SHA-512 in rsa_pkcs1_sign()

= Version 0.11.0 released on 2009-05-03
   * Fixed a bug in mpi_gcd() so that it also works when both
     input numbers are even and added testcases to check
     (found by Pierre Habouzit).
   * Added support for SHA-224, SHA-256, SHA-384 and SHA-512
     one way hash functions with the PKCS#1 v1.5 signing and
     verification.
   * Fixed minor bug regarding mpi_gcd located within the
     POLARSSL_GENPRIME block.
   * Fixed minor memory leak in x509parse_crt() and added better
     handling of 'full' certificate chains (found by Mathias
     Olsson).
   * Centralized file opening and reading for x509 files into
     load_file()
   * Made definition of net_htons() endian-clean for big endian
     systems (Found by Gernot).
   * Undefining POLARSSL_HAVE_ASM now also handles prevents asm in
     padlock and timing code.
   * Fixed an off-by-one buffer allocation in ssl_set_hostname()
     responsible for crashes and unwanted behaviour.
   * Added support for Certificate Revocation List (CRL) parsing.
   * Added support for CRL revocation to x509parse_verify() and
     SSL/TLS code.
   * Fixed compatibility of XTEA and Camellia on a 64-bit system
     (found by Felix von Leitner).

= Version 0.10.0 released on 2009-01-12
   * Migrated XySSL to PolarSSL
   * Added XTEA symmetric cipher
   * Added Camellia symmetric cipher
   * Added support for ciphersuites: SSL_RSA_CAMELLIA_128_SHA,
     SSL_RSA_CAMELLIA_256_SHA and SSL_EDH_RSA_CAMELLIA_256_SHA
   * Fixed dangerous bug that can cause a heap overflow in
     rsa_pkcs1_decrypt (found by Christophe Devine)

================================================================
XySSL ChangeLog

= Version 0.9 released on 2008-03-16

    * Added support for ciphersuite: SSL_RSA_AES_128_SHA
    * Enabled support for large files by default in aescrypt2.c
    * Preliminary openssl wrapper contributed by David Barrett
    * Fixed a bug in ssl_write() that caused the same payload to
      be sent twice in non-blocking mode when send returns EAGAIN
    * Fixed ssl_parse_client_hello(): session id and challenge must
      not be swapped in the SSLv2 ClientHello (found by Greg Robson)
    * Added user-defined callback debug function (Krystian Kolodziej)
    * Before freeing a certificate, properly zero out all cert. data
    * Fixed the "mode" parameter so that encryption/decryption are
      not swapped on PadLock; also fixed compilation on older versions
      of gcc (bug reported by David Barrett)
    * Correctly handle the case in padlock_xcryptcbc() when input or
      ouput data is non-aligned by falling back to the software
      implementation, as VIA Nehemiah cannot handle non-aligned buffers
    * Fixed a memory leak in x509parse_crt() which was reported by Greg
      Robson-Garth; some x509write.c fixes by Pascal Vizeli, thanks to
      Matthew Page who reported several bugs
    * Fixed x509_get_ext() to accept some rare certificates which have
      an INTEGER instead of a BOOLEAN for BasicConstraints::cA.
    * Added support on the client side for the TLS "hostname" extension
      (patch contributed by David Patino)
    * Make x509parse_verify() return BADCERT_CN_MISMATCH when an empty
      string is passed as the CN (bug reported by spoofy)
    * Added an option to enable/disable the BN assembly code
    * Updated rsa_check_privkey() to verify that (D*E) = 1 % (P-1)*(Q-1)
    * Disabled obsolete hash functions by default (MD2, MD4); updated
      selftest and benchmark to not test ciphers that have been disabled
    * Updated x509parse_cert_info() to correctly display byte 0 of the
      serial number, setup correct server port in the ssl client example
    * Fixed a critical denial-of-service with X.509 cert. verification:
      peer may cause xyssl to loop indefinitely by sending a certificate
      for which the RSA signature check fails (bug reported by Benoit)
    * Added test vectors for: AES-CBC, AES-CFB, DES-CBC and 3DES-CBC,
      HMAC-MD5, HMAC-SHA1, HMAC-SHA-256, HMAC-SHA-384, and HMAC-SHA-512
    * Fixed HMAC-SHA-384 and HMAC-SHA-512 (thanks to Josh Sinykin)
    * Modified ssl_parse_client_key_exchange() to protect against
      Daniel Bleichenbacher attack on PKCS#1 v1.5 padding, as well
      as the Klima-Pokorny-Rosa extension of Bleichenbacher's attack
    * Updated rsa_gen_key() so that ctx->N is always nbits in size
    * Fixed assembly PPC compilation errors on Mac OS X, thanks to
      David Barrett and Dusan Semen

= Version 0.8 released on 2007-10-20

    * Modified the HMAC functions to handle keys larger
      than 64 bytes, thanks to Stephane Desneux and gary ng
    * Fixed ssl_read_record() to properly update the handshake
      message digests, which fixes IE6/IE7 client authentication
    * Cleaned up the XYSSL* #defines, suggested by Azriel Fasten
    * Fixed net_recv(), thanks to Lorenz Schori and Egon Kocjan
    * Added user-defined callbacks for handling I/O and sessions
    * Added lots of debugging output in the SSL/TLS functions
    * Added preliminary X.509 cert. writing by Pascal Vizeli
    * Added preliminary support for the VIA PadLock routines
    * Added AES-CFB mode of operation, contributed by chmike
    * Added an SSL/TLS stress testing program (ssl_test.c)
    * Updated the RSA PKCS#1 code to allow choosing between
      RSA_PUBLIC and RSA_PRIVATE, as suggested by David Barrett
    * Updated ssl_read() to skip 0-length records from OpenSSL
    * Fixed the make install target to comply with *BSD make
    * Fixed a bug in mpi_read_binary() on 64-bit platforms
    * mpi_is_prime() speedups, thanks to Kevin McLaughlin
    * Fixed a long standing memory leak in mpi_is_prime()
    * Replaced realloc with malloc in mpi_grow(), and set
      the sign of zero as positive in mpi_init() (reported
      by Jonathan M. McCune)

= Version 0.7 released on 2007-07-07

    * Added support for the MicroBlaze soft-core processor
    * Fixed a bug in ssl_tls.c which sometimes prevented SSL
      connections from being established with non-blocking I/O
    * Fixed a couple bugs in the VS6 and UNIX Makefiles
    * Fixed the "PIC register ebx clobbered in asm" bug
    * Added HMAC starts/update/finish support functions
    * Added the SHA-224, SHA-384 and SHA-512 hash functions
    * Fixed the net_set_*block routines, thanks to Andreas
    * Added a few demonstration programs: md5sum, sha1sum,
      dh_client, dh_server, rsa_genkey, rsa_sign, rsa_verify
    * Added new bignum import and export helper functions
    * Rewrote README.txt in program/ssl/ca to better explain
      how to create a test PKI

= Version 0.6 released on 2007-04-01

    * Ciphers used in SSL/TLS can now be disabled at compile
      time, to reduce the memory footprint on embedded systems
    * Added multiply assembly code for the TriCore and modified
      havege_struct for this processor, thanks to David Patiño
    * Added multiply assembly code for 64-bit PowerPCs,
      thanks to Peking University and the OSU Open Source Lab
    * Added experimental support of Quantum Cryptography
    * Added support for autoconf, contributed by Arnaud Cornet
    * Fixed "long long" compilation issues on IA-64 and PPC64
    * Fixed a bug introduced in xyssl-0.5/timing.c: hardclock
      was not being correctly defined on ARM and MIPS

= Version 0.5 released on 2007-03-01

    * Added multiply assembly code for SPARC and Alpha
    * Added (beta) support for non-blocking I/O operations
    * Implemented session resuming and client authentication
    * Fixed some portability issues on WinCE, MINIX 3, Plan9
      (thanks to Benjamin Newman), HP-UX, FreeBSD and Solaris
    * Improved the performance of the EDH key exchange
    * Fixed a bug that caused valid packets with a payload
      size of 16384 bytes to be rejected

= Version 0.4 released on 2007-02-01

    * Added support for Ephemeral Diffie-Hellman key exchange
    * Added multiply asm code for SSE2, ARM, PPC, MIPS and M68K
    * Various improvement to the modular exponentiation code
    * Rewrote the headers to generate the API docs with doxygen
    * Fixed a bug in ssl_encrypt_buf (incorrect padding was
      generated) and in ssl_parse_client_hello (max. client
      version was not properly set), thanks to Didier Rebeix
    * Fixed another bug in ssl_parse_client_hello: clients with
      cipherlists larger than 96 bytes were incorrectly rejected
    * Fixed a couple memory leak in x509_read.c

= Version 0.3 released on 2007-01-01

    * Added server-side SSLv3 and TLSv1.0 support
    * Multiple fixes to enhance the compatibility with g++,
      thanks to Xosé Antón Otero Ferreira
    * Fixed a bug in the CBC code, thanks to dowst; also,
      the bignum code is no longer dependent on long long
    * Updated rsa_pkcs1_sign to handle arbitrary large inputs
    * Updated timing.c for improved compatibility with i386
      and 486 processors, thanks to Arnaud Cornet

= Version 0.2 released on 2006-12-01

    * Updated timing.c to support ARM and MIPS arch
    * Updated the MPI code to support 8086 on MSVC 1.5
    * Added the copyright notice at the top of havege.h
    * Fixed a bug in sha2_hmac, thanks to newsoft/Wenfang Zhang
    * Fixed a bug reported by Adrian Rüegsegger in x509_read_key
    * Fixed a bug reported by Torsten Lauter in ssl_read_record
    * Fixed a bug in rsa_check_privkey that would wrongly cause
      valid RSA keys to be dismissed (thanks to oldwolf)
    * Fixed a bug in mpi_is_prime that caused some primes to fail
      the Miller-Rabin primality test

    I'd also like to thank Younès Hafri for the CRUX linux port,
    Khalil Petit who added XySSL into pkgsrc and Arnaud Cornet
    who maintains the Debian package :-)

= Version 0.1 released on 2006-11-01