include/psa/crypto.h

/**
 * \file psa/crypto.h
 * \brief Platform Security Architecture cryptography module
 */

#ifndef PSA_CRYPTO_H
#define PSA_CRYPTO_H

#include "crypto_platform.h"

#include <stddef.h>

#ifdef __DOXYGEN_ONLY__
/* This __DOXYGEN_ONLY__ block contains mock definitions for things that
 * must be defined in the crypto_platform.h header. These mock definitions
 * are present in this file as a convenience to generate pretty-printed
 * documentation that includes those definitions. */

/** \defgroup platform Implementation-specific definitions
 * @{
 */

/** \brief Key slot number.
 *
 * This type represents key slots. It must be an unsigned integral
 * type. The choice of type is implementation-dependent.
 * 0 is not a valid key slot number. The meaning of other values is
 * implementation dependent.
 *
 * At any given point in time, each key slot either contains a
 * cryptographic object, or is empty. Key slots are persistent:
 * once set, the cryptographic object remains in the key slot until
 * explicitly destroyed.
 */
typedef _unsigned_integral_type_ psa_key_slot_t;

/**@}*/
#endif /* __DOXYGEN_ONLY__ */

#ifdef __cplusplus
extern "C" {
#endif

/** \defgroup basic Basic definitions
 * @{
 */

#if defined(PSA_SUCCESS)
/* If PSA_SUCCESS is defined, assume that PSA crypto is being used
 * together with PSA IPC, which also defines the identifier
 * PSA_SUCCESS. We must not define PSA_SUCCESS ourselves in that case;
 * the other error code names don't clash. Also define psa_status_t as
 * an alias for the type used by PSA IPC. This is a temporary hack
 * until we unify error reporting in PSA IPC and PSA crypo.
 *
 * Note that psa_defs.h must be included before this header!
 */
typedef psa_error_t psa_status_t;

#else /* defined(PSA_SUCCESS) */

/**
 * \brief Function return status.
 *
 * This is either #PSA_SUCCESS (which is zero), indicating success,
 * or a nonzero value indicating that an error occurred. Errors are
 * encoded as one of the \c PSA_ERROR_xxx values defined here.
 */
typedef int32_t psa_status_t;

/** The action was completed successfully. */
#define PSA_SUCCESS ((psa_status_t)0)

#endif /* !defined(PSA_SUCCESS) */

/** The requested operation or a parameter is not supported
 * by this implementation.
 *
 * Implementations should return this error code when an enumeration
 * parameter such as a key type, algorithm, etc. is not recognized.
 * If a combination of parameters is recognized and identified as
 * not valid, return #PSA_ERROR_INVALID_ARGUMENT instead. */
#define PSA_ERROR_NOT_SUPPORTED         ((psa_status_t)1)

/** The requested action is denied by a policy.
 *
 * Implementations should return this error code when the parameters
 * are recognized as valid and supported, and a policy explicitly
 * denies the requested operation.
 *
 * If a subset of the parameters of a function call identify a
 * forbidden operation, and another subset of the parameters are
 * not valid or not supported, it is unspecified whether the function
 * returns #PSA_ERROR_NOT_PERMITTED, #PSA_ERROR_NOT_SUPPORTED or
 * #PSA_ERROR_INVALID_ARGUMENT. */
#define PSA_ERROR_NOT_PERMITTED         ((psa_status_t)2)

/** An output buffer is too small.
 *
 * Applications can call the `PSA_xxx_SIZE` macro listed in the function
 * description to determine a sufficient buffer size.
 *
 * Implementations should preferably return this error code only
 * in cases when performing the operation with a larger output
 * buffer would succeed. However implementations may return this
 * error if a function has invalid or unsupported parameters in addition
 * to the parameters that determine the necessary output buffer size. */
#define PSA_ERROR_BUFFER_TOO_SMALL      ((psa_status_t)3)

/** A slot is occupied, but must be empty to carry out the
 * requested action.
 *
 * If the slot number is invalid (i.e. the requested action could
 * not be performed even after erasing the slot's content),
 * implementations shall return #PSA_ERROR_INVALID_ARGUMENT instead. */
#define PSA_ERROR_OCCUPIED_SLOT         ((psa_status_t)4)

/** A slot is empty, but must be occupied to carry out the
 * requested action.
 *
 * If the slot number is invalid (i.e. the requested action could
 * not be performed even after creating appropriate content in the slot),
 * implementations shall return #PSA_ERROR_INVALID_ARGUMENT instead. */
#define PSA_ERROR_EMPTY_SLOT            ((psa_status_t)5)

/** The requested action cannot be performed in the current state.
 *
 * Multipart operations return this error when one of the
 * functions is called out of sequence. Refer to the function
 * descriptions for permitted sequencing of functions.
 *
 * Implementations shall not return this error code to indicate
 * that a key slot is occupied when it needs to be free or vice versa,
 * but shall return #PSA_ERROR_OCCUPIED_SLOT or #PSA_ERROR_EMPTY_SLOT
 * as applicable. */
#define PSA_ERROR_BAD_STATE             ((psa_status_t)6)

/** The parameters passed to the function are invalid.
 *
 * Implementations may return this error any time a parameter or
 * combination of parameters are recognized as invalid.
 *
 * Implementations shall not return this error code to indicate
 * that a key slot is occupied when it needs to be free or vice versa,
 * but shall return #PSA_ERROR_OCCUPIED_SLOT or #PSA_ERROR_EMPTY_SLOT
 * as applicable. */
#define PSA_ERROR_INVALID_ARGUMENT      ((psa_status_t)7)

/** There is not enough runtime memory.
 *
 * If the action is carried out across multiple security realms, this
 * error can refer to available memory in any of the security realms. */
#define PSA_ERROR_INSUFFICIENT_MEMORY   ((psa_status_t)8)

/** There is not enough persistent storage.
 *
 * Functions that modify the key storage return this error code if
 * there is insufficient storage space on the host media. In addition,
 * many functions that do not otherwise access storage may return this
 * error code if the implementation requires a mandatory log entry for
 * the requested action and the log storage space is full. */
#define PSA_ERROR_INSUFFICIENT_STORAGE  ((psa_status_t)9)

/** There was a communication failure inside the implementation.
 *
 * This can indicate a communication failure between the application
 * and an external cryptoprocessor or between the cryptoprocessor and
 * an external volatile or persistent memory. A communication failure
 * may be transient or permanent depending on the cause.
 *
 * \warning If a function returns this error, it is undetermined
 * whether the requested action has completed or not. Implementations
 * should return #PSA_SUCCESS on successful completion whenver
 * possible, however functions may return #PSA_ERROR_COMMUNICATION_FAILURE
 * if the requested action was completed successfully in an external
 * cryptoprocessor but there was a breakdown of communication before
 * the cryptoprocessor could report the status to the application.
 */
#define PSA_ERROR_COMMUNICATION_FAILURE ((psa_status_t)10)

/** There was a storage failure that may have led to data loss.
 *
 * This error indicates that some persistent storage is corrupted.
 * It should not be used for a corruption of volatile memory
 * (use #PSA_ERROR_TAMPERING_DETECTED), for a communication error
 * between the cryptoprocessor and its external storage (use
 * #PSA_ERROR_COMMUNICATION_FAILURE), or when the storage is
 * in a valid state but is full (use #PSA_ERROR_INSUFFICIENT_STORAGE).
 *
 * Note that a storage failure does not indicate that any data that was
 * previously read is invalid. However this previously read data may no
 * longer be readable from storage.
 *
 * When a storage failure occurs, it is no longer possible to ensure
 * the global integrity of the keystore. Depending on the global
 * integrity guarantees offered by the implementation, access to other
 * data may or may not fail even if the data is still readable but
 * its integrity canont be guaranteed.
 *
 * Implementations should only use this error code to report a
 * permanent storage corruption. However application writers should
 * keep in mind that transient errors while reading the storage may be
 * reported using this error code. */
#define PSA_ERROR_STORAGE_FAILURE       ((psa_status_t)11)

/** A hardware failure was detected.
 *
 * A hardware failure may be transient or permanent depending on the
 * cause. */
#define PSA_ERROR_HARDWARE_FAILURE      ((psa_status_t)12)

/** A tampering attempt was detected.
 *
 * If an application receives this error code, there is no guarantee
 * that previously accessed or computed data was correct and remains
 * confidential. Applications should not perform any security function
 * and should enter a safe failure state.
 *
 * Implementations may return this error code if they detect an invalid
 * state that cannot happen during normal operation and that indicates
 * that the implementation's security guarantees no longer hold. Depending
 * on the implementation architecture and on its security and safety goals,
 * the implementation may forcibly terminate the application.
 *
 * This error code is intended as a last resort when a security breach
 * is detected and it is unsure whether the keystore data is still
 * protected. Implementations shall only return this error code
 * to report an alarm from a tampering detector, to indicate that
 * the confidentiality of stored data can no longer be guaranteed,
 * or to indicate that the integrity of previously returned data is now
 * considered compromised. Implementations shall not use this error code
 * to indicate a hardware failure that merely makes it impossible to
 * perform the requested operation (use #PSA_ERROR_COMMUNICATION_FAILURE,
 * #PSA_ERROR_STORAGE_FAILURE, #PSA_ERROR_HARDWARE_FAILURE,
 * #PSA_ERROR_INSUFFICIENT_ENTROPY or other applicable error code
 * instead).
 *
 * This error indicates an attack against the application. Implementations
 * shall not return this error code as a consequence of the behavior of
 * the application itself. */
#define PSA_ERROR_TAMPERING_DETECTED    ((psa_status_t)13)

/** There is not enough entropy to generate random data needed
 * for the requested action.
 *
 * This error indicates a failure of a hardware random generator.
 * Application writers should note that this error can be returned not
 * only by functions whose purpose is to generate random data, such
 * as key, IV or nonce generation, but also by functions that execute
 * an algorithm with a randomized result, as well as functions that
 * use randomization of intermediate computations as a countermeasure
 * to certain attacks.
 *
 * Implementations should avoid returning this error after psa_crypto_init()
 * has succeeded. Implementations should generate sufficient
 * entropy during initialization and subsequently use a cryptographically
 * secure pseudorandom generator (PRNG). However implementations may return
 * this error at any time if a policy requires the PRNG to be reseeded
 * during normal operation. */
#define PSA_ERROR_INSUFFICIENT_ENTROPY  ((psa_status_t)14)

/** The signature, MAC or hash is incorrect.
 *
 * Verification functions return this error if the verification
 * calculations completed successfully, and the value to be verified
 * was determined to be incorrect.
 *
 * If the value to verify has an invalid size, implementations may return
 * either #PSA_ERROR_INVALID_ARGUMENT or #PSA_ERROR_INVALID_SIGNATURE. */
#define PSA_ERROR_INVALID_SIGNATURE     ((psa_status_t)15)

/** The decrypted padding is incorrect.
 *
 * \warning In some protocols, when decrypting data, it is essential that
 * the behavior of the application does not depend on whether the padding
 * is correct, down to precise timing. Applications should prefer
 * protocols that use authenticated encryption rather than plain
 * encryption. If the application must perform a decryption of
 * unauthenticated data, the application writer should take care not
 * to reveal whether the padding is invalid.
 *
 * Implementations should strive to make valid and invalid padding
 * as close as possible to indistinguishable to an external observer.
 * In particular, the timing of a decryption operation should not
 * depend on the validity of the padding. */
#define PSA_ERROR_INVALID_PADDING       ((psa_status_t)16)

/** An error occurred that does not correspond to any defined
 * failure cause.
 *
 * Implementations may use this error code if none of the other standard
 * error codes are applicable. */
#define PSA_ERROR_UNKNOWN_ERROR         ((psa_status_t)17)

/**
 * \brief Library initialization.
 *
 * Applications must call this function before calling any other
 * function in this module.
 *
 * Applications may call this function more than once. Once a call
 * succeeds, subsequent calls are guaranteed to succeed.
 *
 * \retval PSA_SUCCESS
 * \retval PSA_ERROR_INSUFFICIENT_MEMORY
 * \retval PSA_ERROR_COMMUNICATION_FAILURE
 * \retval PSA_ERROR_HARDWARE_FAILURE
 * \retval PSA_ERROR_TAMPERING_DETECTED
 * \retval PSA_ERROR_INSUFFICIENT_ENTROPY
 */
psa_status_t psa_crypto_init(void);

#define PSA_BITS_TO_BYTES(bits) (((bits) + 7) / 8)
#define PSA_BYTES_TO_BITS(bytes) ((bytes) * 8)

/**@}*/

/** \defgroup crypto_types Key and algorithm types
 * @{
 */

/** \brief Encoding of a key type.
 */
typedef uint32_t psa_key_type_t;

/** An invalid key type value.
 *
 * Zero is not the encoding of any key type.
 */
#define PSA_KEY_TYPE_NONE                       ((psa_key_type_t)0x00000000)

/** Vendor-defined flag
 *
 * Key types defined by this standard will never have the
 * #PSA_KEY_TYPE_VENDOR_FLAG bit set. Vendors who define additional key types
 * must use an encoding with the #PSA_KEY_TYPE_VENDOR_FLAG bit set and should
 * respect the bitwise structure used by standard encodings whenever practical.
 */
#define PSA_KEY_TYPE_VENDOR_FLAG                ((psa_key_type_t)0x80000000)

#define PSA_KEY_TYPE_CATEGORY_MASK              ((psa_key_type_t)0x7e000000)
/** Raw data.
 *
 * A "key" of this type cannot be used for any cryptographic operation.
 * Applications may use this type to store arbitrary data in the keystore. */
#define PSA_KEY_TYPE_RAW_DATA                   ((psa_key_type_t)0x02000000)
#define PSA_KEY_TYPE_CATEGORY_SYMMETRIC         ((psa_key_type_t)0x04000000)
#define PSA_KEY_TYPE_CATEGORY_ASYMMETRIC        ((psa_key_type_t)0x06000000)
#define PSA_KEY_TYPE_PAIR_FLAG                  ((psa_key_type_t)0x01000000)

/** HMAC key.
 *
 * The key policy determines which underlying hash algorithm the key can be
 * used for.
 *
 * HMAC keys should generally have the same size as the underlying hash.
 * This size can be calculated with `PSA_HASH_SIZE(alg)` where
 * `alg` is the HMAC algorithm or the underlying hash algorithm. */
#define PSA_KEY_TYPE_HMAC                       ((psa_key_type_t)0x02000001)
/** Key for an cipher, AEAD or MAC algorithm based on the AES block cipher.
 *
 * The size of the key can be 16 bytes (AES-128), 24 bytes (AES-192) or
 * 32 bytes (AES-256).
 */
#define PSA_KEY_TYPE_AES                        ((psa_key_type_t)0x04000001)
/** Key for a cipher or MAC algorithm based on DES or 3DES (Triple-DES).
 *
 * The size of the key can be 8 bytes (single DES), 16 bytes (2-key 3DES) or
 * 24 bytes (3-key 3DES).
 *
 * Note that single DES and 2-key 3DES are weak and strongly
 * deprecated and should only be used to decrypt legacy data. 3-key 3DES
 * is weak and deprecated and should only be used in legacy protocols.
 */
#define PSA_KEY_TYPE_DES                        ((psa_key_type_t)0x04000002)
/** Key for an cipher, AEAD or MAC algorithm based on the
 * Camellia block cipher. */
#define PSA_KEY_TYPE_CAMELLIA                   ((psa_key_type_t)0x04000003)
/** Key for the RC4 stream cipher.
 *
 * Note that RC4 is weak and deprecated and should only be used in
 * legacy protocols. */
#define PSA_KEY_TYPE_ARC4                       ((psa_key_type_t)0x04000004)

/** RSA public key. */
#define PSA_KEY_TYPE_RSA_PUBLIC_KEY             ((psa_key_type_t)0x06010000)
/** RSA key pair (private and public key). */
#define PSA_KEY_TYPE_RSA_KEYPAIR                ((psa_key_type_t)0x07010000)
/** DSA public key. */
#define PSA_KEY_TYPE_DSA_PUBLIC_KEY             ((psa_key_type_t)0x06020000)
/** DSA key pair (private and public key). */
#define PSA_KEY_TYPE_DSA_KEYPAIR                ((psa_key_type_t)0x07020000)
#define PSA_KEY_TYPE_ECC_PUBLIC_KEY_BASE        ((psa_key_type_t)0x06030000)
#define PSA_KEY_TYPE_ECC_KEYPAIR_BASE           ((psa_key_type_t)0x07030000)
#define PSA_KEY_TYPE_ECC_CURVE_MASK             ((psa_key_type_t)0x0000ffff)
#define PSA_KEY_TYPE_ECC_KEYPAIR(curve)         \
    (PSA_KEY_TYPE_ECC_KEYPAIR_BASE | (curve))
#define PSA_KEY_TYPE_ECC_PUBLIC_KEY(curve)              \
    (PSA_KEY_TYPE_ECC_PUBLIC_KEY_BASE | (curve))

/** Whether a key type is vendor-defined. */
#define PSA_KEY_TYPE_IS_VENDOR_DEFINED(type) \
    (((type) & PSA_KEY_TYPE_VENDOR_FLAG) != 0)

/** Whether a key type is asymmetric: either a key pair or a public key. */
#define PSA_KEY_TYPE_IS_ASYMMETRIC(type)                                \
    (((type) & PSA_KEY_TYPE_CATEGORY_MASK) == PSA_KEY_TYPE_CATEGORY_ASYMMETRIC)
/** Whether a key type is the public part of a key pair. */
#define PSA_KEY_TYPE_IS_PUBLIC_KEY(type)                                \
    (((type) & (PSA_KEY_TYPE_CATEGORY_MASK | PSA_KEY_TYPE_PAIR_FLAG)) == \
      PSA_KEY_TYPE_CATEGORY_ASYMMETRIC)
/** Whether a key type is a key pair containing a private part and a public
 * part. */
#define PSA_KEY_TYPE_IS_KEYPAIR(type)                                   \
    (((type) & (PSA_KEY_TYPE_CATEGORY_MASK | PSA_KEY_TYPE_PAIR_FLAG)) == \
     (PSA_KEY_TYPE_CATEGORY_ASYMMETRIC | PSA_KEY_TYPE_PAIR_FLAG))
/** Whether a key type is an RSA key pair or public key. */
/** The key pair type corresponding to a public key type. */
#define PSA_KEY_TYPE_KEYPAIR_OF_PUBLIC_KEY(type)        \
    ((type) | PSA_KEY_TYPE_PAIR_FLAG)
/** The public key type corresponding to a key pair type. */
#define PSA_KEY_TYPE_PUBLIC_KEY_OF_KEYPAIR(type)        \
    ((type) & ~PSA_KEY_TYPE_PAIR_FLAG)
#define PSA_KEY_TYPE_IS_RSA(type)                                       \
    (PSA_KEY_TYPE_PUBLIC_KEY_OF_KEYPAIR(type) == PSA_KEY_TYPE_RSA_PUBLIC_KEY)
/** Whether a key type is an elliptic curve key pair or public key. */
#define PSA_KEY_TYPE_IS_ECC(type)                                       \
    ((PSA_KEY_TYPE_PUBLIC_KEY_OF_KEYPAIR(type) &                        \
      ~PSA_KEY_TYPE_ECC_CURVE_MASK) == PSA_KEY_TYPE_ECC_PUBLIC_KEY_BASE)

/** The type of PSA elliptic curve identifiers. */
typedef uint16_t psa_ecc_curve_t;
/** Extract the curve from an elliptic curve key type. */
#define PSA_KEY_TYPE_GET_CURVE(type)                             \
    ((psa_ecc_curve_t) (PSA_KEY_TYPE_IS_ECC(type) ?              \
                        ((type) & PSA_KEY_TYPE_ECC_CURVE_MASK) : \
                        0))

/* The encoding of curve identifiers is currently aligned with the
 * TLS Supported Groups Registry (formerly known as the
 * TLS EC Named Curve Registry)
 * https://www.iana.org/assignments/tls-parameters/tls-parameters.xhtml#tls-parameters-8
 * The values are defined by RFC 4492, RFC 7027 and RFC 7919. */
#define PSA_ECC_CURVE_SECT163K1         ((psa_ecc_curve_t) 0x0001)
#define PSA_ECC_CURVE_SECT163R1         ((psa_ecc_curve_t) 0x0002)
#define PSA_ECC_CURVE_SECT163R2         ((psa_ecc_curve_t) 0x0003)
#define PSA_ECC_CURVE_SECT193R1         ((psa_ecc_curve_t) 0x0004)
#define PSA_ECC_CURVE_SECT193R2         ((psa_ecc_curve_t) 0x0005)
#define PSA_ECC_CURVE_SECT233K1         ((psa_ecc_curve_t) 0x0006)
#define PSA_ECC_CURVE_SECT233R1         ((psa_ecc_curve_t) 0x0007)
#define PSA_ECC_CURVE_SECT239K1         ((psa_ecc_curve_t) 0x0008)
#define PSA_ECC_CURVE_SECT283K1         ((psa_ecc_curve_t) 0x0009)
#define PSA_ECC_CURVE_SECT283R1         ((psa_ecc_curve_t) 0x000a)
#define PSA_ECC_CURVE_SECT409K1         ((psa_ecc_curve_t) 0x000b)
#define PSA_ECC_CURVE_SECT409R1         ((psa_ecc_curve_t) 0x000c)
#define PSA_ECC_CURVE_SECT571K1         ((psa_ecc_curve_t) 0x000d)
#define PSA_ECC_CURVE_SECT571R1         ((psa_ecc_curve_t) 0x000e)
#define PSA_ECC_CURVE_SECP160K1         ((psa_ecc_curve_t) 0x000f)
#define PSA_ECC_CURVE_SECP160R1         ((psa_ecc_curve_t) 0x0010)
#define PSA_ECC_CURVE_SECP160R2         ((psa_ecc_curve_t) 0x0011)
#define PSA_ECC_CURVE_SECP192K1         ((psa_ecc_curve_t) 0x0012)
#define PSA_ECC_CURVE_SECP192R1         ((psa_ecc_curve_t) 0x0013)
#define PSA_ECC_CURVE_SECP224K1         ((psa_ecc_curve_t) 0x0014)
#define PSA_ECC_CURVE_SECP224R1         ((psa_ecc_curve_t) 0x0015)
#define PSA_ECC_CURVE_SECP256K1         ((psa_ecc_curve_t) 0x0016)
#define PSA_ECC_CURVE_SECP256R1         ((psa_ecc_curve_t) 0x0017)
#define PSA_ECC_CURVE_SECP384R1         ((psa_ecc_curve_t) 0x0018)
#define PSA_ECC_CURVE_SECP521R1         ((psa_ecc_curve_t) 0x0019)
#define PSA_ECC_CURVE_BRAINPOOL_P256R1  ((psa_ecc_curve_t) 0x001a)
#define PSA_ECC_CURVE_BRAINPOOL_P384R1  ((psa_ecc_curve_t) 0x001b)
#define PSA_ECC_CURVE_BRAINPOOL_P512R1  ((psa_ecc_curve_t) 0x001c)
#define PSA_ECC_CURVE_CURVE25519        ((psa_ecc_curve_t) 0x001d)
#define PSA_ECC_CURVE_CURVE448          ((psa_ecc_curve_t) 0x001e)
#define PSA_ECC_CURVE_FFDHE_2048        ((psa_ecc_curve_t) 0x0100)
#define PSA_ECC_CURVE_FFDHE_3072        ((psa_ecc_curve_t) 0x0101)
#define PSA_ECC_CURVE_FFDHE_4096        ((psa_ecc_curve_t) 0x0102)
#define PSA_ECC_CURVE_FFDHE_6144        ((psa_ecc_curve_t) 0x0103)
#define PSA_ECC_CURVE_FFDHE_8192        ((psa_ecc_curve_t) 0x0104)

/** The block size of a block cipher.
 *
 * \param type  A cipher key type (value of type #psa_key_type_t).
 *
 * \return      The block size for a block cipher, or 1 for a stream cipher.
 *              The return value is undefined if \c type is not a supported
 *              cipher key type.
 *
 * \note It is possible to build stream cipher algorithms on top of a block
 *       cipher, for example CTR mode (#PSA_ALG_CTR).
 *       This macro only takes the key type into account, so it cannot be
 *       used to determine the size of the data that #psa_cipher_update()
 *       might buffer for future processing in general.
 *
 * \note This macro returns a compile-time constant if its argument is one.
 *
 * \warning This macro may evaluate its argument multiple times.
 */
#define PSA_BLOCK_CIPHER_BLOCK_SIZE(type)            \
    (                                                \
        (type) == PSA_KEY_TYPE_AES ? 16 :            \
        (type) == PSA_KEY_TYPE_DES ? 8 :             \
        (type) == PSA_KEY_TYPE_CAMELLIA ? 16 :       \
        (type) == PSA_KEY_TYPE_ARC4 ? 1 :            \
        0)

/** \brief Encoding of a cryptographic algorithm.
 *
 * For algorithms that can be applied to multiple key types, this type
 * does not encode the key type. For example, for symmetric ciphers
 * based on a block cipher, #psa_algorithm_t encodes the block cipher
 * mode and the padding mode while the block cipher itself is encoded
 * via #psa_key_type_t.
 */
typedef uint32_t psa_algorithm_t;

#define PSA_ALG_VENDOR_FLAG                     ((psa_algorithm_t)0x80000000)
#define PSA_ALG_CATEGORY_MASK                   ((psa_algorithm_t)0x7f000000)
#define PSA_ALG_CATEGORY_HASH                   ((psa_algorithm_t)0x01000000)
#define PSA_ALG_CATEGORY_MAC                    ((psa_algorithm_t)0x02000000)
#define PSA_ALG_CATEGORY_CIPHER                 ((psa_algorithm_t)0x04000000)
#define PSA_ALG_CATEGORY_AEAD                   ((psa_algorithm_t)0x06000000)
#define PSA_ALG_CATEGORY_SIGN                   ((psa_algorithm_t)0x10000000)
#define PSA_ALG_CATEGORY_ASYMMETRIC_ENCRYPTION  ((psa_algorithm_t)0x12000000)
#define PSA_ALG_CATEGORY_KEY_AGREEMENT          ((psa_algorithm_t)0x22000000)
#define PSA_ALG_CATEGORY_KEY_DERIVATION         ((psa_algorithm_t)0x30000000)

#define PSA_ALG_IS_VENDOR_DEFINED(alg)                                  \
    (((alg) & PSA_ALG_VENDOR_FLAG) != 0)
/** Whether the specified algorithm is a hash algorithm.
 *
 * \param alg An algorithm identifier (value of type #psa_algorithm_t).
 *
 * \return 1 if \c alg is a hash algorithm, 0 otherwise.
 *         This macro may return either 0 or 1 if \c alg is not a valid
 *         algorithm identifier.
 */
#define PSA_ALG_IS_HASH(alg)                                            \
    (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_HASH)
#define PSA_ALG_IS_MAC(alg)                                             \
    (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_MAC)
#define PSA_ALG_IS_CIPHER(alg)                                          \
    (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_CIPHER)
#define PSA_ALG_IS_AEAD(alg)                                            \
    (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_AEAD)
#define PSA_ALG_IS_SIGN(alg)                                            \
    (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_SIGN)
#define PSA_ALG_IS_ASYMMETRIC_ENCRYPTION(alg)                           \
    (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_ASYMMETRIC_ENCRYPTION)
#define PSA_ALG_IS_KEY_AGREEMENT(alg)                                   \
    (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_KEY_AGREEMENT)
#define PSA_ALG_IS_KEY_DERIVATION(alg)                                  \
    (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_KEY_DERIVATION)

#define PSA_ALG_HASH_MASK                       ((psa_algorithm_t)0x000000ff)
#define PSA_ALG_MD2                             ((psa_algorithm_t)0x01000001)
#define PSA_ALG_MD4                             ((psa_algorithm_t)0x01000002)
#define PSA_ALG_MD5                             ((psa_algorithm_t)0x01000003)
#define PSA_ALG_RIPEMD160                       ((psa_algorithm_t)0x01000004)
#define PSA_ALG_SHA_1                           ((psa_algorithm_t)0x01000005)
#define PSA_ALG_SHA_224                         ((psa_algorithm_t)0x01000008)
#define PSA_ALG_SHA_256                         ((psa_algorithm_t)0x01000009)
#define PSA_ALG_SHA_384                         ((psa_algorithm_t)0x0100000a)
#define PSA_ALG_SHA_512                         ((psa_algorithm_t)0x0100000b)
#define PSA_ALG_SHA_512_224                     ((psa_algorithm_t)0x0100000c)
#define PSA_ALG_SHA_512_256                     ((psa_algorithm_t)0x0100000d)
#define PSA_ALG_SHA3_224                        ((psa_algorithm_t)0x01000010)
#define PSA_ALG_SHA3_256                        ((psa_algorithm_t)0x01000011)
#define PSA_ALG_SHA3_384                        ((psa_algorithm_t)0x01000012)
#define PSA_ALG_SHA3_512                        ((psa_algorithm_t)0x01000013)

#define PSA_ALG_MAC_SUBCATEGORY_MASK            ((psa_algorithm_t)0x00c00000)
#define PSA_ALG_HMAC_BASE                       ((psa_algorithm_t)0x02800000)
/** Macro to build an HMAC algorithm.
 *
 * For example, `PSA_ALG_HMAC(PSA_ALG_SHA256)` is HMAC-SHA-256.
 *
 * \param hash_alg      A hash algorithm (\c PSA_ALG_XXX value such that
 *                      #PSA_ALG_IS_HASH(alg) is true).
 *
 * \return              The corresponding HMAC algorithm.
 * \return              Unspecified if \p alg is not a supported
 *                      hash algorithm.
 */
#define PSA_ALG_HMAC(hash_alg)                                  \
    (PSA_ALG_HMAC_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
#define PSA_ALG_HMAC_HASH(hmac_alg)                             \
    (PSA_ALG_CATEGORY_HASH | ((hmac_alg) & PSA_ALG_HASH_MASK))
#define PSA_ALG_IS_HMAC(alg)                                            \
    (((alg) & (PSA_ALG_CATEGORY_MASK | PSA_ALG_MAC_SUBCATEGORY_MASK)) == \
     PSA_ALG_HMAC_BASE)
#define PSA_ALG_CIPHER_MAC_BASE                 ((psa_algorithm_t)0x02c00000)
#define PSA_ALG_CBC_MAC                         ((psa_algorithm_t)0x02c00001)
#define PSA_ALG_CMAC                            ((psa_algorithm_t)0x02c00002)
#define PSA_ALG_GMAC                            ((psa_algorithm_t)0x02c00003)
#define PSA_ALG_IS_CIPHER_MAC(alg)                                      \
    (((alg) & (PSA_ALG_CATEGORY_MASK | PSA_ALG_MAC_SUBCATEGORY_MASK)) == \
     PSA_ALG_CIPHER_MAC_BASE)

#define PSA_ALG_CIPHER_SUBCATEGORY_MASK         ((psa_algorithm_t)0x00c00000)
#define PSA_ALG_BLOCK_CIPHER_BASE               ((psa_algorithm_t)0x04000000)
#define PSA_ALG_BLOCK_CIPHER_MODE_MASK          ((psa_algorithm_t)0x000000ff)
#define PSA_ALG_BLOCK_CIPHER_PADDING_MASK       ((psa_algorithm_t)0x003f0000)
#define PSA_ALG_BLOCK_CIPHER_PAD_NONE           ((psa_algorithm_t)0x00000000)
#define PSA_ALG_BLOCK_CIPHER_PAD_PKCS7          ((psa_algorithm_t)0x00010000)
#define PSA_ALG_IS_BLOCK_CIPHER(alg)            \
    (((alg) & (PSA_ALG_CATEGORY_MASK | PSA_ALG_CIPHER_SUBCATEGORY_MASK)) == \
        PSA_ALG_BLOCK_CIPHER_BASE)

#define PSA_ALG_CBC_BASE                        ((psa_algorithm_t)0x04000001)
#define PSA_ALG_CFB_BASE                        ((psa_algorithm_t)0x04000002)
#define PSA_ALG_OFB_BASE                        ((psa_algorithm_t)0x04000003)
#define PSA_ALG_XTS_BASE                        ((psa_algorithm_t)0x04000004)
#define PSA_ALG_STREAM_CIPHER                   ((psa_algorithm_t)0x04800000)
#define PSA_ALG_CTR                             ((psa_algorithm_t)0x04800001)
#define PSA_ALG_ARC4                            ((psa_algorithm_t)0x04800002)

#define PSA_ALG_IS_STREAM_CIPHER(alg)            \
    (((alg) & (PSA_ALG_CATEGORY_MASK | PSA_ALG_CIPHER_SUBCATEGORY_MASK)) == \
        PSA_ALG_STREAM_CIPHER)

#define PSA_ALG_CCM                             ((psa_algorithm_t)0x06000001)
#define PSA_ALG_GCM                             ((psa_algorithm_t)0x06000002)

#define PSA_ALG_RSA_PKCS1V15_SIGN_BASE          ((psa_algorithm_t)0x10020000)
/** RSA PKCS#1 v1.5 signature with hashing.
 *
 * This is the signature scheme defined by RFC 8017
 * (PKCS#1: RSA Cryptography Specifications) under the name
 * RSASSA-PKCS1-v1_5.
 *
 * \param hash_alg      A hash algorithm (\c PSA_ALG_XXX value such that
 *                      #PSA_ALG_IS_HASH(alg) is true).
 *
 * \return              The corresponding RSA PKCS#1 v1.5 signature algorithm.
 * \return              Unspecified if \p alg is not a supported
 *                      hash algorithm.
 */
#define PSA_ALG_RSA_PKCS1V15_SIGN(hash_alg)                             \
    (PSA_ALG_RSA_PKCS1V15_SIGN_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
/** Raw PKCS#1 v1.5 signature.
 *
 * The input to this algorithm is the DigestInfo structure used by
 * RFC 8017 (PKCS#1: RSA Cryptography Specifications), &sect;9.2
 * steps 3&ndash;6.
 */
#define PSA_ALG_RSA_PKCS1V15_SIGN_RAW PSA_ALG_RSA_PKCS1V15_SIGN_BASE
#define PSA_ALG_IS_RSA_PKCS1V15_SIGN(alg)                               \
    (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_RSA_PKCS1V15_SIGN_BASE)
#define PSA_ALG_RSA_PSS_BASE               ((psa_algorithm_t)0x10030000)
/** RSA PSS signature with hashing.
 *
 * This is the signature scheme defined by RFC 8017
 * (PKCS#1: RSA Cryptography Specifications) under the name
 * RSASSA-PSS, with the message generation function MGF1. The specified
 * hash algorithm is used to hash the input message, to create the
 * salted hash, and for the mask generation.
 *
 * \param hash_alg      A hash algorithm (\c PSA_ALG_XXX value such that
 *                      #PSA_ALG_IS_HASH(alg) is true).
 *
 * \return              The corresponding RSA PSS signature algorithm.
 * \return              Unspecified if \p alg is not a supported
 *                      hash algorithm.
 */
#define PSA_ALG_RSA_PSS(hash_alg)                               \
    (PSA_ALG_RSA_PSS_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
#define PSA_ALG_IS_RSA_PSS(alg)                                 \
    (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_RSA_PSS_BASE)

/** Get the hash used by a hash-and-sign signature algorithm.
 *
 * A hash-and-sign algorithm is a signature algorithm which is
 * composed of two phases: first a hashing phase which does not use
 * the key and produces a hash of the input message, then a signing
 * phase which only uses the hash and the key and not the message
 * itself.
 *
 * \param alg   A signature algorithm (\c PSA_ALG_XXX value such that
 *              #PSA_ALG_IS_SIGN(alg) is true).
 *
 * \return      The underlying hash algorithm if \p alg is a hash-and-sign
 *              algorithm.
 * \return      0 if \p alg is a signature algorithm that does not
 *              follow the hash-and-sign structure.
 * \return      Unspecified if \p alg is not a signature algorithm or
 *              if it is not supported by the implementation.
 */
#define PSA_ALG_SIGN_GET_HASH(alg)                                     \
    (PSA_ALG_IS_SIGN(alg) ?                                            \
     ((alg) & PSA_ALG_HASH_MASK) | PSA_ALG_CATEGORY_HASH :             \
     0)

#define PSA_ALG_ECDSA_RAW                       ((psa_algorithm_t)0x10030000)
#define PSA_ALG_RSA_PKCS1V15_CRYPT              ((psa_algorithm_t)0x12020000)
#define PSA_ALG_RSA_OAEP_BASE                   ((psa_algorithm_t)0x12030000)
#define PSA_ALG_RSA_OAEP(hash_alg)                              \
    (PSA_ALG_RSA_OAEP_BASE | ((hash_alg) & PSA_ALG_HASH_MASK))
#define PSA_ALG_IS_RSA_OAEP(alg)                                \
    (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_RSA_OAEP_BASE)

/**@}*/

/** \defgroup key_management Key management
 * @{
 */

/**
 * \brief Import a key in binary format.
 *
 * This function supports any output from psa_export_key(). Refer to the
 * documentation of psa_export_key() for the format for each key type.
 *
 * \param key         Slot where the key will be stored. This must be a
 *                    valid slot for a key of the chosen type. It must
 *                    be unoccupied.
 * \param type        Key type (a \c PSA_KEY_TYPE_XXX value).
 * \param data        Buffer containing the key data.
 * \param data_length Size of the \c data buffer in bytes.
 *
 * \retval PSA_SUCCESS
 *         Success.
 * \retval PSA_ERROR_NOT_SUPPORTED
 *         The key type or key size is not supported, either by the
 *         implementation in general or in this particular slot.
 * \retval PSA_ERROR_INVALID_ARGUMENT
 *         The key slot is invalid,
 *         or the key data is not correctly formatted.
 * \retval PSA_ERROR_OCCUPIED_SLOT
 *         There is already a key in the specified slot.
 * \retval PSA_ERROR_INSUFFICIENT_MEMORY
 * \retval PSA_ERROR_INSUFFICIENT_STORAGE
 * \retval PSA_ERROR_COMMUNICATION_FAILURE
 * \retval PSA_ERROR_HARDWARE_FAILURE
 * \retval PSA_ERROR_TAMPERING_DETECTED
 */
psa_status_t psa_import_key(psa_key_slot_t key,
                            psa_key_type_t type,
                            const uint8_t *data,
                            size_t data_length);

/**
 * \brief Destroy a key and restore the slot to its default state.
 *
 * This function destroys the content of the key slot from both volatile
 * memory and, if applicable, non-volatile storage. Implementations shall
 * make a best effort to ensure that any previous content of the slot is
 * unrecoverable.
 *
 * This function also erases any metadata such as policies. It returns the
 * specified slot to its default state.
 *
 * \param key           The key slot to erase.
 *
 * \retval PSA_SUCCESS
 *         The slot's content, if any, has been erased.
 * \retval PSA_ERROR_NOT_PERMITTED
 *         The slot holds content and cannot be erased because it is
 *         read-only, either due to a policy or due to physical restrictions.
 * \retval PSA_ERROR_INVALID_ARGUMENT
 *         The specified slot number does not designate a valid slot.
 * \retval PSA_ERROR_COMMUNICATION_FAILURE
 *         There was an failure in communication with the cryptoprocessor.
 *         The key material may still be present in the cryptoprocessor.
 * \retval PSA_ERROR_STORAGE_FAILURE
 *         The storage is corrupted. Implementations shall make a best effort
 *         to erase key material even in this stage, however applications
 *         should be aware that it may be impossible to guarantee that the
 *         key material is not recoverable in such cases.
 * \retval PSA_ERROR_TAMPERING_DETECTED
 *         An unexpected condition which is not a storage corruption or
 *         a communication failure occurred. The cryptoprocessor may have
 *         been compromised.
 */
psa_status_t psa_destroy_key(psa_key_slot_t key);

/**
 * \brief Get basic metadata about a key.
 *
 * \param key           Slot whose content is queried. This must
 *                      be an occupied key slot.
 * \param type          On success, the key type (a \c PSA_KEY_TYPE_XXX value).
 *                      This may be a null pointer, in which case the key type
 *                      is not written.
 * \param bits          On success, the key size in bits.
 *                      This may be a null pointer, in which case the key size
 *                      is not written.
 *
 * \retval PSA_SUCCESS
 * \retval PSA_ERROR_EMPTY_SLOT
 * \retval PSA_ERROR_COMMUNICATION_FAILURE
 * \retval PSA_ERROR_HARDWARE_FAILURE
 * \retval PSA_ERROR_TAMPERING_DETECTED
 */
psa_status_t psa_get_key_information(psa_key_slot_t key,
                                     psa_key_type_t *type,
                                     size_t *bits);

/**
 * \brief Export a key in binary format.
 *
 * The output of this function can be passed to psa_import_key() to
 * create an equivalent object.
 *
 * If a key is created with psa_import_key() and then exported with
 * this function, it is not guaranteed that the resulting data is
 * identical: the implementation may choose a different representation
 * of the same key if the format permits it.
 *
 * For standard key types, the output format is as follows:
 *
 * - For symmetric keys (including MAC keys), the format is the
 *   raw bytes of the key.
 * - For DES, the key data consists of 8 bytes. The parity bits must be
 *   correct.
 * - For Triple-DES, the format is the concatenation of the
 *   two or three DES keys.
 * - For RSA key pairs (#PSA_KEY_TYPE_RSA_KEYPAIR), the format
 *   is the non-encrypted DER representation defined by PKCS\#8 (RFC 5208)
 *   as PrivateKeyInfo.
 * - For RSA public keys (#PSA_KEY_TYPE_RSA_PUBLIC_KEY), the format
 *   is the DER representation defined by RFC 5280 as SubjectPublicKeyInfo.
 *
 * \param key           Slot whose content is to be exported. This must
 *                      be an occupied key slot.
 * \param data          Buffer where the key data is to be written.
 * \param data_size     Size of the \c data buffer in bytes.
 * \param data_length   On success, the number of bytes
 *                      that make up the key data.
 *
 * \retval PSA_SUCCESS
 * \retval PSA_ERROR_EMPTY_SLOT
 * \retval PSA_ERROR_NOT_PERMITTED
 * \retval PSA_ERROR_COMMUNICATION_FAILURE
 * \retval PSA_ERROR_HARDWARE_FAILURE
 * \retval PSA_ERROR_TAMPERING_DETECTED
 */
psa_status_t psa_export_key(psa_key_slot_t key,
                            uint8_t *data,
                            size_t data_size,
                            size_t *data_length);

/**
 * \brief Export a public key or the public part of a key pair in binary format.
 *
 * The output of this function can be passed to psa_import_key() to
 * create an object that is equivalent to the public key.
 *
 * For standard key types, the output format is as follows:
 *
 * - For RSA keys (#PSA_KEY_TYPE_RSA_KEYPAIR or #PSA_KEY_TYPE_RSA_PUBLIC_KEY),
 *   the format is the DER representation of the public key defined by RFC 5280
 *   as SubjectPublicKeyInfo.
 *
 * \param key           Slot whose content is to be exported. This must
 *                      be an occupied key slot.
 * \param data          Buffer where the key data is to be written.
 * \param data_size     Size of the \c data buffer in bytes.
 * \param data_length   On success, the number of bytes
 *                      that make up the key data.
 *
 * \retval PSA_SUCCESS
 * \retval PSA_ERROR_EMPTY_SLOT
 * \retval PSA_ERROR_INVALID_ARGUMENT
 * \retval PSA_ERROR_COMMUNICATION_FAILURE
 * \retval PSA_ERROR_HARDWARE_FAILURE
 * \retval PSA_ERROR_TAMPERING_DETECTED
 */
psa_status_t psa_export_public_key(psa_key_slot_t key,
                                   uint8_t *data,
                                   size_t data_size,
                                   size_t *data_length);

/**@}*/

/** \defgroup policy Key policies
 * @{
 */

/** \brief Encoding of permitted usage on a key. */
typedef uint32_t psa_key_usage_t;

/** Whether the key may be exported.
 *
 * A public key or the public part of a key pair may always be exported
 * regardless of the value of this permission flag.
 *
 * If a key does not have export permission, implementations shall not
 * allow the key to be exported in plain form from the cryptoprocessor,
 * whether through psa_export_key() or through a proprietary interface.
 * The key may however be exportable in a wrapped form, i.e. in a form
 * where it is encrypted by another key.
 */
#define PSA_KEY_USAGE_EXPORT                    ((psa_key_usage_t)0x00000001)

/** Whether the key may be used to encrypt a message.
 *
 * For a key pair, this concerns the public key.
 */
#define PSA_KEY_USAGE_ENCRYPT                   ((psa_key_usage_t)0x00000100)

/** Whether the key may be used to decrypt a message.
 *
 * For a key pair, this concerns the private key.
 */
#define PSA_KEY_USAGE_DECRYPT                   ((psa_key_usage_t)0x00000200)

/** Whether the key may be used to sign a message.
 *
 * For a key pair, this concerns the private key.
 */
#define PSA_KEY_USAGE_SIGN                      ((psa_key_usage_t)0x00000400)

/** Whether the key may be used to verify a message signature.
 *
 * For a key pair, this concerns the public key.
 */
#define PSA_KEY_USAGE_VERIFY                    ((psa_key_usage_t)0x00000800)

/** The type of the key policy data structure.
 *
 * This is an implementation-defined \c struct. Applications should not
 * make any assumptions about the content of this structure except
 * as directed by the documentation of a specific implementation. */
typedef struct psa_key_policy_s psa_key_policy_t;

/** \brief Initialize a key policy structure to a default that forbids all
 * usage of the key. */
void psa_key_policy_init(psa_key_policy_t *policy);

/** \brief Set the standard fields of a policy structure.
 *
 * Note that this function does not make any consistency check of the
 * parameters. The values are only checked when applying the policy to
 * a key slot with psa_set_key_policy().
 */
void psa_key_policy_set_usage(psa_key_policy_t *policy,
                              psa_key_usage_t usage,
                              psa_algorithm_t alg);

psa_key_usage_t psa_key_policy_get_usage(psa_key_policy_t *policy);

psa_algorithm_t psa_key_policy_get_algorithm(psa_key_policy_t *policy);

/** \brief Set the usage policy on a key slot.
 *
 * This function must be called on an empty key slot, before importing,
 * generating or creating a key in the slot. Changing the policy of an
 * existing key is not permitted.
 *
 * Implementations may set restrictions on supported key policies
 * depending on the key type and the key slot.
 */
psa_status_t psa_set_key_policy(psa_key_slot_t key,
                                const psa_key_policy_t *policy);

/** \brief Get the usage policy for a key slot.
 */
psa_status_t psa_get_key_policy(psa_key_slot_t key,
                                psa_key_policy_t *policy);

/**@}*/

/** \defgroup persistence Key lifetime
 * @{
 */

/** Encoding of key lifetimes.
 */
typedef uint32_t psa_key_lifetime_t;

/** A volatile key slot retains its content as long as the application is
 * running. It is guaranteed to be erased on a power reset.
 */
#define PSA_KEY_LIFETIME_VOLATILE               ((psa_key_lifetime_t)0x00000000)

/** A persistent key slot retains its content as long as it is not explicitly
 * destroyed.
 */
#define PSA_KEY_LIFETIME_PERSISTENT             ((psa_key_lifetime_t)0x00000001)

/** A write-once key slot may not be modified once a key has been set.
 * It will retain its content as long as the device remains operational.
 */
#define PSA_KEY_LIFETIME_WRITE_ONCE             ((psa_key_lifetime_t)0x7fffffff)

/** \brief Retrieve the lifetime of a key slot.
 *
 * The assignment of lifetimes to slots is implementation-dependent.
 *
 * \param key           Slot to query.
 * \param lifetime      On success, the lifetime value.
 *
 * \retval PSA_SUCCESS
 *         Success.
 * \retval PSA_ERROR_INVALID_ARGUMENT
 *         The key slot is invalid.
 * \retval PSA_ERROR_COMMUNICATION_FAILURE
 * \retval PSA_ERROR_HARDWARE_FAILURE
 * \retval PSA_ERROR_TAMPERING_DETECTED
 */
psa_status_t psa_get_key_lifetime(psa_key_slot_t key,
                                  psa_key_lifetime_t *lifetime);

/** \brief Change the lifetime of a key slot.
 *
 * Whether the lifetime of a key slot can be changed at all, and if so
 * whether the lifetime of an occupied key slot can be changed, is
 * implementation-dependent.
 *
 * \param key           Slot whose lifetime is to be changed.
 * \param lifetime      The lifetime value to set for the given key slot.
 *
 * \retval PSA_SUCCESS
 *         Success.
 * \retval PSA_ERROR_INVALID_ARGUMENT
 *         The key slot is invalid,
 *         or the lifetime value is invalid.
 * \retval PSA_ERROR_NOT_SUPPORTED
 *         The implementation does not support the specified lifetime value,
 *         at least for the specified key slot.
 * \retval PSA_ERROR_OCCUPIED_SLOT
 *         The slot contains a key, and the implementation does not support
 *         changing the lifetime of an occupied slot.
 * \retval PSA_ERROR_COMMUNICATION_FAILURE
 * \retval PSA_ERROR_HARDWARE_FAILURE
 * \retval PSA_ERROR_TAMPERING_DETECTED
 */
psa_status_t psa_set_key_lifetime(psa_key_slot_t key,
                                  psa_key_lifetime_t lifetime);

/**@}*/

/** \defgroup hash Message digests
 * @{
 */

/** The type of the state data structure for multipart hash operations.
 *
 * This is an implementation-defined \c struct. Applications should not
 * make any assumptions about the content of this structure except
 * as directed by the documentation of a specific implementation. */
typedef struct psa_hash_operation_s psa_hash_operation_t;

/** The size of the output of psa_hash_finish(), in bytes.
 *
 * This is also the hash size that psa_hash_verify() expects.
 *
 * \param alg   A hash algorithm (\c PSA_ALG_XXX value such that
 *              #PSA_ALG_IS_HASH(alg) is true), or an HMAC algorithm
 *              (`PSA_ALG_HMAC(hash_alg)` where `hash_alg` is a
 *              hash algorithm).
 *
 * \return The hash size for the specified hash algorithm.
 *         If the hash algorithm is not recognized, return 0.
 *         An implementation may return either 0 or the correct size
 *         for a hash algorithm that it recognizes, but does not support.
 */
#define PSA_HASH_SIZE(alg)                                      \
    (                                                           \
        PSA_ALG_HMAC_HASH(alg) == PSA_ALG_MD2 ? 16 :            \
        PSA_ALG_HMAC_HASH(alg) == PSA_ALG_MD4 ? 16 :            \
        PSA_ALG_HMAC_HASH(alg) == PSA_ALG_MD5 ? 16 :            \
        PSA_ALG_HMAC_HASH(alg) == PSA_ALG_RIPEMD160 ? 20 :      \
        PSA_ALG_HMAC_HASH(alg) == PSA_ALG_SHA_1 ? 20 :          \
        PSA_ALG_HMAC_HASH(alg) == PSA_ALG_SHA_224 ? 28 :        \
        PSA_ALG_HMAC_HASH(alg) == PSA_ALG_SHA_256 ? 32 :        \
        PSA_ALG_HMAC_HASH(alg) == PSA_ALG_SHA_384 ? 48 :        \
        PSA_ALG_HMAC_HASH(alg) == PSA_ALG_SHA_512 ? 64 :        \
        PSA_ALG_HMAC_HASH(alg) == PSA_ALG_SHA_512_224 ? 28 :    \
        PSA_ALG_HMAC_HASH(alg) == PSA_ALG_SHA_512_256 ? 32 :    \
        PSA_ALG_HMAC_HASH(alg) == PSA_ALG_SHA3_224 ? 28 :       \
        PSA_ALG_HMAC_HASH(alg) == PSA_ALG_SHA3_256 ? 32 :       \
        PSA_ALG_HMAC_HASH(alg) == PSA_ALG_SHA3_384 ? 48 :       \
        PSA_ALG_HMAC_HASH(alg) == PSA_ALG_SHA3_512 ? 64 :       \
        0)

/** Start a multipart hash operation.
 *
 * The sequence of operations to calculate a hash (message digest)
 * is as follows:
 * -# Allocate an operation object which will be passed to all the functions
 *    listed here.
 * -# Call psa_hash_start() to specify the algorithm.
 * -# Call psa_hash_update() zero, one or more times, passing a fragment
 *    of the message each time. The hash that is calculated is the hash
 *    of the concatenation of these messages in order.
 * -# To calculate the hash, call psa_hash_finish().
 *    To compare the hash with an expected value, call psa_hash_verify().
 *
 * The application may call psa_hash_abort() at any time after the operation
 * has been initialized with psa_hash_start().
 *
 * After a successful call to psa_hash_start(), the application must
 * eventually terminate the operation. The following events terminate an
 * operation:
 * - A failed call to psa_hash_update().
 * - A call to psa_hash_finish(), psa_hash_verify() or psa_hash_abort().
 *
 * \param operation The operation object to use.
 * \param alg       The hash algorithm to compute (\c PSA_ALG_XXX value
 *                  such that #PSA_ALG_IS_HASH(alg) is true).
 *
 * \retval PSA_SUCCESS
 *         Success.
 * \retval PSA_ERROR_NOT_SUPPORTED
 *         \c alg is not supported or is not a hash algorithm.
 * \retval PSA_ERROR_INSUFFICIENT_MEMORY
 * \retval PSA_ERROR_COMMUNICATION_FAILURE
 * \retval PSA_ERROR_HARDWARE_FAILURE
 * \retval PSA_ERROR_TAMPERING_DETECTED
 */
psa_status_t psa_hash_start(psa_hash_operation_t *operation,
                            psa_algorithm_t alg);

/** Add a message fragment to a multipart hash operation.
 *
 * The application must call psa_hash_start() before calling this function.
 *
 * If this function returns an error status, the operation becomes inactive.
 *
 * \param operation     Active hash operation.
 * \param input         Buffer containing the message fragment to hash.
 * \param input_length  Size of the \c input buffer in bytes.
 *
 * \retval PSA_SUCCESS
 *         Success.
 * \retval PSA_ERROR_BAD_STATE
 *         The operation state is not valid (not started, or already completed).
 * \retval PSA_ERROR_INSUFFICIENT_MEMORY
 * \retval PSA_ERROR_COMMUNICATION_FAILURE
 * \retval PSA_ERROR_HARDWARE_FAILURE
 * \retval PSA_ERROR_TAMPERING_DETECTED
 */
psa_status_t psa_hash_update(psa_hash_operation_t *operation,
                             const uint8_t *input,
                             size_t input_length);

/** Finish the calculation of the hash of a message.
 *
 * The application must call psa_hash_start() before calling this function.
 * This function calculates the hash of the message formed by concatenating
 * the inputs passed to preceding calls to psa_hash_update().
 *
 * When this function returns, the operation becomes inactive.
 *
 * \warning Applications should not call this function if they expect
 *          a specific value for the hash. Call psa_hash_verify() instead.
 *          Beware that comparing integrity or authenticity data such as
 *          hash values with a function such as \c memcmp is risky
 *          because the time taken by the comparison may leak information
 *          about the hashed data which could allow an attacker to guess
 *          a valid hash and thereby bypass security controls.
 *
 * \param operation     Active hash operation.
 * \param hash          Buffer where the hash is to be written.
 * \param hash_size     Size of the \c hash buffer in bytes.
 * \param hash_length   On success, the number of bytes
 *                      that make up the hash value. This is always
 *                      #PSA_HASH_SIZE(alg) where \c alg is the
 *                      hash algorithm that is calculated.
 *
 * \retval PSA_SUCCESS
 *         Success.
 * \retval PSA_ERROR_BAD_STATE
 *         The operation state is not valid (not started, or already completed).
 * \retval PSA_ERROR_BUFFER_TOO_SMALL
 *         The size of the \c hash buffer is too small. You can determine a
 *         sufficient buffer size by calling #PSA_HASH_SIZE(alg)
 *         where \c alg is the hash algorithm that is calculated.
 * \retval PSA_ERROR_INSUFFICIENT_MEMORY
 * \retval PSA_ERROR_COMMUNICATION_FAILURE
 * \retval PSA_ERROR_HARDWARE_FAILURE
 * \retval PSA_ERROR_TAMPERING_DETECTED
 */
psa_status_t psa_hash_finish(psa_hash_operation_t *operation,
                             uint8_t *hash,
                             size_t hash_size,
                             size_t *hash_length);

/** Finish the calculation of the hash of a message and compare it with
 * an expected value.
 *
 * The application must call psa_hash_start() before calling this function.
 * This function calculates the hash of the message formed by concatenating
 * the inputs passed to preceding calls to psa_hash_update(). It then
 * compares the calculated hash with the expected hash passed as a
 * parameter to this function.
 *
 * When this function returns, the operation becomes inactive.
 *
 * \note Implementations shall make the best effort to ensure that the
 * comparison between the actual hash and the expected hash is performed
 * in constant time.
 *
 * \param operation     Active hash operation.
 * \param hash          Buffer containing the expected hash value.
 * \param hash_length   Size of the \c hash buffer in bytes.
 *
 * \retval PSA_SUCCESS
 *         The expected hash is identical to the actual hash of the message.
 * \retval PSA_ERROR_INVALID_SIGNATURE
 *         The hash of the message was calculated successfully, but it
 *         differs from the expected hash.
 * \retval PSA_ERROR_BAD_STATE
 *         The operation state is not valid (not started, or already completed).
 * \retval PSA_ERROR_INSUFFICIENT_MEMORY
 * \retval PSA_ERROR_COMMUNICATION_FAILURE
 * \retval PSA_ERROR_HARDWARE_FAILURE
 * \retval PSA_ERROR_TAMPERING_DETECTED
 */
psa_status_t psa_hash_verify(psa_hash_operation_t *operation,
                             const uint8_t *hash,
                             size_t hash_length);

/** Abort a hash operation.
 *
 * This function may be called at any time after psa_hash_start().
 * Aborting an operation frees all associated resources except for the
 * \c operation structure itself.
 *
 * Implementation should strive to be robust and handle inactive hash
 * operations safely (do nothing and return #PSA_ERROR_BAD_STATE). However,
 * application writers should beware that uninitialized memory may happen
 * to be indistinguishable from an active hash operation, and the behavior
 * of psa_hash_abort() is undefined in this case.
 *
 * \param operation     Active hash operation.
 *
 * \retval PSA_SUCCESS
 * \retval PSA_ERROR_BAD_STATE
 *         \c operation is not an active hash operation.
 * \retval PSA_ERROR_COMMUNICATION_FAILURE
 * \retval PSA_ERROR_HARDWARE_FAILURE
 * \retval PSA_ERROR_TAMPERING_DETECTED
 */
psa_status_t psa_hash_abort(psa_hash_operation_t *operation);

/**@}*/

/** \defgroup MAC Message authentication codes
 * @{
 */

/** The type of the state data structure for multipart MAC operations.
 *
 * This is an implementation-defined \c struct. Applications should not
 * make any assumptions about the content of this structure except
 * as directed by the documentation of a specific implementation. */
typedef struct psa_mac_operation_s psa_mac_operation_t;

/** The size of the output of psa_mac_finish(), in bytes.
 *
 * This is also the MAC size that psa_mac_verify() expects.
 *
 * \param key_type      The type of the MAC key.
 * \param key_bits      The size of the MAC key in bits.
 * \param alg           A MAC algorithm (\c PSA_ALG_XXX value such that
 *                      #PSA_ALG_IS_MAC(alg) is true).
 *
 * \return              The MAC size for the specified algorithm with
 *                      the specified key parameters.
 * \return              0 if the MAC algorithm is not recognized.
 * \return              Either 0 or the correct size for a MAC algorithm that
 *                      the implementation recognizes, but does not support.
 * \return              Unspecified if the key parameters are not consistent
 *                      with the algorithm.
 */
#define PSA_MAC_FINAL_SIZE(key_type, key_bits, alg)                     \
    (PSA_ALG_IS_HMAC(alg) ? PSA_HASH_SIZE(PSA_ALG_HMAC_HASH(alg)) : \
     PSA_ALG_IS_BLOCK_CIPHER_MAC(alg) ? PSA_BLOCK_CIPHER_BLOCK_SIZE(key_type) : \
     0)

/** Start a multipart MAC operation.
 *
 * The sequence of operations to calculate a MAC (message authentication code)
 * is as follows:
 * -# Allocate an operation object which will be passed to all the functions
 *    listed here.
 * -# Call psa_mac_start() to specify the algorithm and key.
 *    The key remains associated with the operation even if the content
 *    of the key slot changes.
 * -# Call psa_mac_update() zero, one or more times, passing a fragment
 *    of the message each time. The MAC that is calculated is the MAC
 *    of the concatenation of these messages in order.
 * -# To calculate the MAC, call psa_mac_finish().
 *    To compare the MAC with an expected value, call psa_mac_verify().
 *
 * The application may call psa_mac_abort() at any time after the operation
 * has been initialized with psa_mac_start().
 *
 * After a successful call to psa_mac_start(), the application must
 * eventually terminate the operation. The following events terminate an
 * operation:
 * - A failed call to psa_mac_update().
 * - A call to psa_mac_finish(), psa_mac_verify() or psa_mac_abort().
 *
 * \param operation The operation object to use.
 * \param key       Slot containing the key to use for the operation.
 * \param alg       The MAC algorithm to compute (\c PSA_ALG_XXX value
 *                  such that #PSA_ALG_IS_MAC(alg) is true).
 *
 * \retval PSA_SUCCESS
 *         Success.
 * \retval PSA_ERROR_EMPTY_SLOT
 * \retval PSA_ERROR_NOT_PERMITTED
 * \retval PSA_ERROR_INVALID_ARGUMENT
 *         \c key is not compatible with \c alg.
 * \retval PSA_ERROR_NOT_SUPPORTED
 *         \c alg is not supported or is not a MAC algorithm.
 * \retval PSA_ERROR_INSUFFICIENT_MEMORY
 * \retval PSA_ERROR_COMMUNICATION_FAILURE
 * \retval PSA_ERROR_HARDWARE_FAILURE
 * \retval PSA_ERROR_TAMPERING_DETECTED
 */
psa_status_t psa_mac_start(psa_mac_operation_t *operation,
                           psa_key_slot_t key,
                           psa_algorithm_t alg);

psa_status_t psa_mac_update(psa_mac_operation_t *operation,
                            const uint8_t *input,
                            size_t input_length);

psa_status_t psa_mac_finish(psa_mac_operation_t *operation,
                            uint8_t *mac,
                            size_t mac_size,
                            size_t *mac_length);

psa_status_t psa_mac_verify(psa_mac_operation_t *operation,
                            const uint8_t *mac,
                            size_t mac_length);

psa_status_t psa_mac_abort(psa_mac_operation_t *operation);

/**@}*/

/** \defgroup cipher Symmetric ciphers
 * @{
 */

/** The type of the state data structure for multipart cipher operations.
 *
 * This is an implementation-defined \c struct. Applications should not
 * make any assumptions about the content of this structure except
 * as directed by the documentation of a specific implementation. */
typedef struct psa_cipher_operation_s psa_cipher_operation_t;

/** Set the key for a multipart symmetric encryption operation.
 *
 * The sequence of operations to encrypt a message with a symmetric cipher
 * is as follows:
 * -# Allocate an operation object which will be passed to all the functions
 *    listed here.
 * -# Call psa_encrypt_setup() to specify the algorithm and key.
 *    The key remains associated with the operation even if the content
 *    of the key slot changes.
 * -# Call either psa_encrypt_generate_iv() or psa_encrypt_set_iv() to
 *    generate or set the IV (initialization vector). You should use
 *    psa_encrypt_generate_iv() unless the protocol you are implementing
 *    requires a specific IV value.
 * -# Call psa_cipher_update() zero, one or more times, passing a fragment
 *    of the message each time.
 * -# Call psa_cipher_finish().
 *
 * The application may call psa_cipher_abort() at any time after the operation
 * has been initialized with psa_encrypt_setup().
 *
 * After a successful call to psa_encrypt_setup(), the application must
 * eventually terminate the operation. The following events terminate an
 * operation:
 * - A failed call to psa_encrypt_generate_iv(), psa_encrypt_set_iv()
 *   or psa_cipher_update().
 * - A call to psa_cipher_finish() or psa_cipher_abort().
 *
 * \param operation The operation object to use.
 * \param key       Slot containing the key to use for the operation.
 * \param alg       The cipher algorithm to compute (\c PSA_ALG_XXX value
 *                  such that #PSA_ALG_IS_CIPHER(alg) is true).
 *
 * \retval PSA_SUCCESS
 *         Success.
 * \retval PSA_ERROR_EMPTY_SLOT
 * \retval PSA_ERROR_NOT_PERMITTED
 * \retval PSA_ERROR_INVALID_ARGUMENT
 *         \c key is not compatible with \c alg.
 * \retval PSA_ERROR_NOT_SUPPORTED
 *         \c alg is not supported or is not a cipher algorithm.
 * \retval PSA_ERROR_INSUFFICIENT_MEMORY
 * \retval PSA_ERROR_COMMUNICATION_FAILURE
 * \retval PSA_ERROR_HARDWARE_FAILURE
 * \retval PSA_ERROR_TAMPERING_DETECTED
 */
psa_status_t psa_encrypt_setup(psa_cipher_operation_t *operation,
                               psa_key_slot_t key,
                               psa_algorithm_t alg);

/** Set the key for a multipart symmetric decryption operation.
 *
 * The sequence of operations to decrypt a message with a symmetric cipher
 * is as follows:
 * -# Allocate an operation object which will be passed to all the functions
 *    listed here.
 * -# Call psa_decrypt_setup() to specify the algorithm and key.
 *    The key remains associated with the operation even if the content
 *    of the key slot changes.
 * -# Call psa_cipher_update() with the IV (initialization vector) for the
 *    decryption. If the IV is prepended to the ciphertext, you can call
 *    psa_cipher_update() on a buffer containing the IV followed by the
 *    beginning of the message.
 * -# Call psa_cipher_update() zero, one or more times, passing a fragment
 *    of the message each time.
 * -# Call psa_cipher_finish().
 *
 * The application may call psa_cipher_abort() at any time after the operation
 * has been initialized with psa_encrypt_setup().
 *
 * After a successful call to psa_decrypt_setup(), the application must
 * eventually terminate the operation. The following events terminate an
 * operation:
 * - A failed call to psa_cipher_update().
 * - A call to psa_cipher_finish() or psa_cipher_abort().
 *
 * \param operation The operation object to use.
 * \param key       Slot containing the key to use for the operation.
 * \param alg       The cipher algorithm to compute (\c PSA_ALG_XXX value
 *                  such that #PSA_ALG_IS_CIPHER(alg) is true).
 *
 * \retval PSA_SUCCESS
 *         Success.
 * \retval PSA_ERROR_EMPTY_SLOT
 * \retval PSA_ERROR_NOT_PERMITTED
 * \retval PSA_ERROR_INVALID_ARGUMENT
 *         \c key is not compatible with \c alg.
 * \retval PSA_ERROR_NOT_SUPPORTED
 *         \c alg is not supported or is not a cipher algorithm.
 * \retval PSA_ERROR_INSUFFICIENT_MEMORY
 * \retval PSA_ERROR_COMMUNICATION_FAILURE
 * \retval PSA_ERROR_HARDWARE_FAILURE
 * \retval PSA_ERROR_TAMPERING_DETECTED
 */
psa_status_t psa_decrypt_setup(psa_cipher_operation_t *operation,
                               psa_key_slot_t key,
                               psa_algorithm_t alg);

psa_status_t psa_encrypt_generate_iv(psa_cipher_operation_t *operation,
                                     unsigned char *iv,
                                     size_t iv_size,
                                     size_t *iv_length);

psa_status_t psa_encrypt_set_iv(psa_cipher_operation_t *operation,
                                const unsigned char *iv,
                                size_t iv_length);

psa_status_t psa_cipher_update(psa_cipher_operation_t *operation,
                               const uint8_t *input,
                               size_t input_length,
                               unsigned char *output,
                               size_t output_size,
                               size_t *output_length);

psa_status_t psa_cipher_finish(psa_cipher_operation_t *operation,
                               uint8_t *output,
                               size_t output_size,
                               size_t *output_length);

psa_status_t psa_cipher_abort(psa_cipher_operation_t *operation);

/**@}*/

/** \defgroup aead Authenticated encryption with associated data (AEAD)
 * @{
 */

/** The tag size for an AEAD algorithm, in bytes.
 *
 * \param alg                 An AEAD algorithm
 *                            (\c PSA_ALG_XXX value such that
 *                            #PSA_ALG_IS_AEAD(alg) is true).
 *
 * \return                    The tag size for the specified algorithm.
 *                            If the AEAD algorithm does not have an identified
 *                            tag that can be distinguished from the rest of
 *                            the ciphertext, return 0.
 *                            If the AEAD algorithm is not recognized, return 0.
 *                            An implementation may return either 0 or a
 *                            correct size for an AEAD algorithm that it
 *                            recognizes, but does not support.
 */
#define PSA_AEAD_TAG_SIZE(alg)             \
    ((alg) == PSA_ALG_GCM ? 16 :           \
     (alg) == PSA_ALG_CCM ? 16 :           \
     0)

/** The maximum size of the output of psa_aead_encrypt(), in bytes.
 *
 * If the size of the ciphertext buffer is at least this large, it is
 * guaranteed that psa_aead_encrypt() will not fail due to an
 * insufficient buffer size. Depending on the algorithm, the actual size of
 * the ciphertext may be smaller.
 *
 * \param alg                 An AEAD algorithm
 *                            (\c PSA_ALG_XXX value such that
 *                            #PSA_ALG_IS_AEAD(alg) is true).
 * \param plaintext_length    Size of the plaintext in bytes.
 *
 * \return                    The AEAD ciphertext size for the specified
 *                            algorithm.
 *                            If the AEAD algorithm is not recognized, return 0.
 *                            An implementation may return either 0 or a
 *                            correct size for an AEAD algorithm that it
 *                            recognizes, but does not support.
 */
#define PSA_AEAD_ENCRYPT_OUTPUT_SIZE(alg, plaintext_length)     \
    (PSA_AEAD_TAG_SIZE(alg) != 0 ?                              \
     (plaintext_length) + PSA_AEAD_TAG_SIZE(alg) :              \
     0)

/** Process an authenticated encryption operation.
 *
 * \param key                     Slot containing the key to use.
 * \param alg                     The AEAD algorithm to compute
 *                                (\c PSA_ALG_XXX value such that
 *                                #PSA_ALG_IS_AEAD(alg) is true).
 * \param nonce                   Nonce or IV to use.
 * \param nonce_length            Size of the \p nonce buffer in bytes.
 * \param additional_data         Additional data that will be authenticated
 *                                but not encrypted.
 * \param additional_data_length  Size of \p additional_data in bytes.
 * \param plaintext               Data that will be authenticated and
 *                                encrypted.
 * \param plaintext_length        Size of \p plaintext in bytes.
 * \param ciphertext              Output buffer for the authenticated and
 *                                encrypted data. The additional data is not
 *                                part of this output. For algorithms where the
 *                                encrypted data and the authentication tag
 *                                are defined as separate outputs, the
 *                                authentication tag is appended to the
 *                                encrypted data.
 * \param ciphertext_size         Size of the \p ciphertext buffer in bytes.
 *                                This must be at least
 *                                #PSA_AEAD_ENCRYPT_OUTPUT_SIZE(\p alg,
 *                                \p plaintext_length).
 * \param ciphertext_length       On success, the size of the output
 *                                in the \b ciphertext buffer.
 *
 * \retval PSA_SUCCESS
 *         Success.
 * \retval PSA_ERROR_EMPTY_SLOT
 * \retval PSA_ERROR_NOT_PERMITTED
 * \retval PSA_ERROR_INVALID_ARGUMENT
 *         \c key is not compatible with \c alg.
 * \retval PSA_ERROR_NOT_SUPPORTED
 *         \c alg is not supported or is not an AEAD algorithm.
 * \retval PSA_ERROR_INSUFFICIENT_MEMORY
 * \retval PSA_ERROR_COMMUNICATION_FAILURE
 * \retval PSA_ERROR_HARDWARE_FAILURE
 * \retval PSA_ERROR_TAMPERING_DETECTED
 */
psa_status_t psa_aead_encrypt( psa_key_slot_t key,
                               psa_algorithm_t alg,
                               const uint8_t *nonce,
                               size_t nonce_length,
                               const uint8_t *additional_data,
                               size_t additional_data_length,
                               const uint8_t *plaintext,
                               size_t plaintext_length,
                               uint8_t *ciphertext,
                               size_t ciphertext_size,
                               size_t *ciphertext_length );

/** The maximum size of the output of psa_aead_decrypt(), in bytes.
 *
 * If the size of the plaintext buffer is at least this large, it is
 * guaranteed that psa_aead_decrypt() will not fail due to an
 * insufficient buffer size. Depending on the algorithm, the actual size of
 * the plaintext may be smaller.
 *
 * \param alg                 An AEAD algorithm
 *                            (\c PSA_ALG_XXX value such that
 *                            #PSA_ALG_IS_AEAD(alg) is true).
 * \param ciphertext_length   Size of the plaintext in bytes.
 *
 * \return                    The AEAD ciphertext size for the specified
 *                            algorithm.
 *                            If the AEAD algorithm is not recognized, return 0.
 *                            An implementation may return either 0 or a
 *                            correct size for an AEAD algorithm that it
 *                            recognizes, but does not support.
 */
#define PSA_AEAD_DECRYPT_OUTPUT_SIZE(alg, ciphertext_length)    \
    (PSA_AEAD_TAG_SIZE(alg) != 0 ?                              \
     (plaintext_length) - PSA_AEAD_TAG_SIZE(alg) :              \
     0)

/** Process an authenticated decryption operation.
 *
 * \param key                     Slot containing the key to use.
 * \param alg                     The AEAD algorithm to compute
 *                                (\c PSA_ALG_XXX value such that
 *                                #PSA_ALG_IS_AEAD(alg) is true).
 * \param nonce                   Nonce or IV to use.
 * \param nonce_length            Size of the \p nonce buffer in bytes.
 * \param additional_data         Additional data that has been authenticated
 *                                but not encrypted.
 * \param additional_data_length  Size of \p additional_data in bytes.
 * \param ciphertext              Data that has been authenticated and
 *                                encrypted. For algorithms where the
 *                                encrypted data and the authentication tag
 *                                are defined as separate inputs, the buffer
 *                                must contain the encrypted data followed
 *                                by the authentication tag.
 * \param ciphertext_length       Size of \p ciphertext in bytes.
 * \param plaintext               Output buffer for the decrypted data.
 * \param plaintext_size          Size of the \p plaintext buffer in bytes.
 *                                This must be at least
 *                                #PSA_AEAD_DECRYPT_OUTPUT_SIZE(\p alg,
 *                                \p ciphertext_length).
 * \param plaintext_length        On success, the size of the output
 *                                in the \b plaintext buffer.
 *
 * \retval PSA_SUCCESS
 *         Success.
 * \retval PSA_ERROR_EMPTY_SLOT
 * \retval PSA_ERROR_INVALID_SIGNATURE
 *         The ciphertext is not authentic.
 * \retval PSA_ERROR_NOT_PERMITTED
 * \retval PSA_ERROR_INVALID_ARGUMENT
 *         \c key is not compatible with \c alg.
 * \retval PSA_ERROR_NOT_SUPPORTED
 *         \c alg is not supported or is not an AEAD algorithm.
 * \retval PSA_ERROR_INSUFFICIENT_MEMORY
 * \retval PSA_ERROR_COMMUNICATION_FAILURE
 * \retval PSA_ERROR_HARDWARE_FAILURE
 * \retval PSA_ERROR_TAMPERING_DETECTED
 */
psa_status_t psa_aead_decrypt( psa_key_slot_t key,
                               psa_algorithm_t alg,
                               const uint8_t *nonce,
                               size_t nonce_length,
                               const uint8_t *additional_data,
                               size_t additional_data_length,
                               const uint8_t *ciphertext,
                               size_t ciphertext_length,
                               uint8_t *plaintext,
                               size_t plaintext_size,
                               size_t *plaintext_length );

/**@}*/

/** \defgroup asymmetric Asymmetric cryptography
 * @{
 */

/**
 * \brief Maximum ECDSA signature size for a given curve bit size
 *
 * \param curve_bits    Curve size in bits
 * \return              Maximum signature size in bytes
 *
 * \note This macro returns a compile-time constant if its argument is one.
 *
 * \warning This macro may evaluate its argument multiple times.
 */
/*
 * RFC 4492 page 20:
 *
 *     Ecdsa-Sig-Value ::= SEQUENCE {
 *         r       INTEGER,
 *         s       INTEGER
 *     }
 *
 * Size is at most
 *    1 (tag) + 1 (len) + 1 (initial 0) + curve_bytes for each of r and s,
 *    twice that + 1 (tag) + 2 (len) for the sequence
 * (assuming curve_bytes is less than 126 for r and s,
 * and less than 124 (total len <= 255) for the sequence)
 */
#define PSA_ECDSA_SIGNATURE_SIZE(curve_bits)                          \
    ( /*T,L of SEQUENCE*/ ((curve_bits) >= 61 * 8 ? 3 : 2) +          \
      /*T,L of r,s*/       2 * (((curve_bits) >= 127 * 8 ? 3 : 2) +   \
      /*V of r,s*/               ((curve_bits) + 8) / 8))


/** Safe signature buffer size for psa_asymmetric_sign().
 *
 * This macro returns a safe buffer size for a signature using a key
 * of the specified type and size, with the specified algorithm.
 * Note that the actual size of the signature may be smaller
 * (some algorithms produce a variable-size signature).
 *
 * \warning This function may call its arguments multiple times or
 *          zero times, so you should not pass arguments that contain
 *          side effects.
 *
 * \param key_type  An asymmetric key type (this may indifferently be a
 *                  key pair type or a public key type).
 * \param key_bits  The size of the key in bits.
 * \param alg       The signature algorithm.
 *
 * \return If the parameters are valid and supported, return
 *         a buffer size in bytes that guarantees that
 *         psa_asymmetric_sign() will not fail with
 *         #PSA_ERROR_BUFFER_TOO_SMALL.
 *         If the parameters are a valid combination that is not supported
 *         by the implementation, this macro either shall return either a
 *         sensible size or 0.
 *         If the parameters are not valid, the
 *         return value is unspecified.
 *
 */
#define PSA_ASYMMETRIC_SIGN_OUTPUT_SIZE(key_type, key_bits, alg)        \
    (PSA_KEY_TYPE_IS_RSA(key_type) ? ((void)alg, PSA_BITS_TO_BYTES(key_bits)) : \
     PSA_KEY_TYPE_IS_ECC(key_type) ? PSA_ECDSA_SIGNATURE_SIZE(key_bits) : \
     ((void)alg, 0))

/**
 * \brief Sign a hash or short message with a private key.
 *
 * Note that to perform a hash-and-sign signature algorithm, you must
 * first calculate the hash by calling psa_hash_start(), psa_hash_update()
 * and psa_hash_finish(). Then pass the resulting hash as the \p hash
 * parameter to this function. You can use #PSA_ALG_SIGN_GET_HASH(\p alg)
 * to determine the hash algorithm to use.
 *
 * \param key               Key slot containing an asymmetric key pair.
 * \param alg               A signature algorithm that is compatible with
 *                          the type of \c key.
 * \param hash              The hash or message to sign.
 * \param hash_length       Size of the \c hash buffer in bytes.
 * \param salt              A salt or label, if supported by the signature
 *                          algorithm.
 *                          If the signature algorithm does not support a
 *                          salt, pass \c NULL.
 *                          If the signature algorithm supports an optional
 *                          salt and you do not want to pass a salt,
 *                          pass \c NULL.
 * \param salt_length       Size of the \c salt buffer in bytes.
 *                          If \c salt is \c NULL, pass 0.
 * \param signature         Buffer where the signature is to be written.
 * \param signature_size    Size of the \c signature buffer in bytes.
 * \param signature_length  On success, the number of bytes
 *                          that make up the returned signature value.
 *
 * \retval PSA_SUCCESS
 * \retval PSA_ERROR_BUFFER_TOO_SMALL
 *         The size of the \c signature buffer is too small. You can
 *         determine a sufficient buffer size by calling
 *         #PSA_ASYMMETRIC_SIGN_OUTPUT_SIZE(key_type, key_bits, alg)
 *         where \c key_type and \c key_bits are the type and bit-size
 *         respectively of \c key.
 * \retval PSA_ERROR_NOT_SUPPORTED
 * \retval PSA_ERROR_INVALID_ARGUMENT
 * \retval PSA_ERROR_INSUFFICIENT_MEMORY
 * \retval PSA_ERROR_COMMUNICATION_FAILURE
 * \retval PSA_ERROR_HARDWARE_FAILURE
 * \retval PSA_ERROR_TAMPERING_DETECTED
 * \retval PSA_ERROR_INSUFFICIENT_ENTROPY
 */
psa_status_t psa_asymmetric_sign(psa_key_slot_t key,
                                 psa_algorithm_t alg,
                                 const uint8_t *hash,
                                 size_t hash_length,
                                 const uint8_t *salt,
                                 size_t salt_length,
                                 uint8_t *signature,
                                 size_t signature_size,
                                 size_t *signature_length);

/**
 * \brief Verify the signature a hash or short message using a public key.
 *
 * Note that to perform a hash-and-sign signature algorithm, you must
 * first calculate the hash by calling psa_hash_start(), psa_hash_update()
 * and psa_hash_finish(). Then pass the resulting hash as the \p hash
 * parameter to this function. You can use #PSA_ALG_SIGN_GET_HASH(\p alg)
 * to determine the hash algorithm to use.
 *
 * \param key               Key slot containing a public key or an
 *                          asymmetric key pair.
 * \param alg               A signature algorithm that is compatible with
 *                          the type of \c key.
 * \param hash              The hash or message whose signature is to be
 *                          verified.
 * \param hash_length       Size of the \c hash buffer in bytes.
 * \param salt              A salt or label, if supported by the signature
 *                          algorithm.
 *                          If the signature algorithm does not support a
 *                          salt, pass \c NULL.
 *                          If the signature algorithm supports an optional
 *                          salt and you do not want to pass a salt,
 *                          pass \c NULL.
 * \param salt_length       Size of the \c salt buffer in bytes.
 *                          If \c salt is \c NULL, pass 0.
 * \param signature         Buffer containing the signature to verify.
 * \param signature_size    Size of the \c signature buffer in bytes.
 *
 * \retval PSA_SUCCESS
 *         The signature is valid.
 * \retval PSA_ERROR_INVALID_SIGNATURE
 *         The calculation was perfomed successfully, but the passed
 *         signature is not a valid signature.
 * \retval PSA_ERROR_NOT_SUPPORTED
 * \retval PSA_ERROR_INVALID_ARGUMENT
 * \retval PSA_ERROR_INSUFFICIENT_MEMORY
 * \retval PSA_ERROR_COMMUNICATION_FAILURE
 * \retval PSA_ERROR_HARDWARE_FAILURE
 * \retval PSA_ERROR_TAMPERING_DETECTED
 */
psa_status_t psa_asymmetric_verify(psa_key_slot_t key,
                                   psa_algorithm_t alg,
                                   const uint8_t *hash,
                                   size_t hash_length,
                                   const uint8_t *salt,
                                   size_t salt_length,
                                   uint8_t *signature,
                                   size_t signature_size);

#define PSA_ASYMMETRIC_ENCRYPT_OUTPUT_SIZE(key_type, key_bits, alg)     \
    (PSA_KEY_TYPE_IS_RSA(key_type) ?                                    \
     ((void)alg, PSA_BITS_TO_BYTES(key_bits)) :                         \
     0)
#define PSA_RSA_MINIMUM_PADDING_SIZE(alg)                               \
    (PSA_ALG_IS_RSA_OAEP_MGF1(alg) ?                                    \
     2 * PSA_HASH_FINAL_SIZE(PSA_ALG_RSA_GET_HASH(alg)) + 1 :           \
     11 /*PKCS#1v1.5*/)
#define PSA_ASYMMETRIC_DECRYPT_OUTPUT_SIZE(key_type, key_bits, alg)     \
    (PSA_KEY_TYPE_IS_RSA(key_type) ?                                    \
     PSA_BITS_TO_BYTES(key_bits) - PSA_RSA_MINIMUM_PADDING_SIZE(alg) :  \
     0)

/**
 * \brief Encrypt a short message with a public key.
 *
 * \param key               Key slot containing a public key or an asymmetric
 *                          key pair.
 * \param alg               An asymmetric encryption algorithm that is
 *                          compatible with the type of \c key.
 * \param input             The message to encrypt.
 * \param input_length      Size of the \c input buffer in bytes.
 * \param salt              A salt or label, if supported by the encryption
 *                          algorithm.
 *                          If the algorithm does not support a
 *                          salt, pass \c NULL.
 *                          If the algorithm supports an optional
 *                          salt and you do not want to pass a salt,
 *                          pass \c NULL.
 *
 *                          - For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is
 *                            supported.
 * \param salt_length       Size of the \c salt buffer in bytes.
 *                          If \c salt is \c NULL, pass 0.
 * \param output            Buffer where the encrypted message is to be written.
 * \param output_size       Size of the \c output buffer in bytes.
 * \param output_length     On success, the number of bytes
 *                          that make up the returned output.
 *
 * \retval PSA_SUCCESS
 * \retval PSA_ERROR_BUFFER_TOO_SMALL
 *         The size of the \c output buffer is too small. You can
 *         determine a sufficient buffer size by calling
 *         #PSA_ASYMMETRIC_ENCRYPT_OUTPUT_SIZE(key_type, key_bits, alg)
 *         where \c key_type and \c key_bits are the type and bit-size
 *         respectively of \c key.
 * \retval PSA_ERROR_NOT_SUPPORTED
 * \retval PSA_ERROR_INVALID_ARGUMENT
 * \retval PSA_ERROR_INSUFFICIENT_MEMORY
 * \retval PSA_ERROR_COMMUNICATION_FAILURE
 * \retval PSA_ERROR_HARDWARE_FAILURE
 * \retval PSA_ERROR_TAMPERING_DETECTED
 * \retval PSA_ERROR_INSUFFICIENT_ENTROPY
 */
psa_status_t psa_asymmetric_encrypt(psa_key_slot_t key,
                                    psa_algorithm_t alg,
                                    const uint8_t *input,
                                    size_t input_length,
                                    const uint8_t *salt,
                                    size_t salt_length,
                                    uint8_t *output,
                                    size_t output_size,
                                    size_t *output_length);

/**
 * \brief Decrypt a short message with a private key.
 *
 * \param key               Key slot containing an asymmetric key pair.
 * \param alg               An asymmetric encryption algorithm that is
 *                          compatible with the type of \c key.
 * \param input             The message to decrypt.
 * \param input_length      Size of the \c input buffer in bytes.
 * \param salt              A salt or label, if supported by the encryption
 *                          algorithm.
 *                          If the algorithm does not support a
 *                          salt, pass \c NULL.
 *                          If the algorithm supports an optional
 *                          salt and you do not want to pass a salt,
 *                          pass \c NULL.
 *
 *                          - For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is
 *                            supported.
 * \param salt_length       Size of the \c salt buffer in bytes.
 *                          If \c salt is \c NULL, pass 0.
 * \param output            Buffer where the decrypted message is to be written.
 * \param output_size       Size of the \c output buffer in bytes.
 * \param output_length     On success, the number of bytes
 *                          that make up the returned output.
 *
 * \retval PSA_SUCCESS
 * \retval PSA_ERROR_BUFFER_TOO_SMALL
 *         The size of the \c output buffer is too small. You can
 *         determine a sufficient buffer size by calling
 *         #PSA_ASYMMETRIC_DECRYPT_OUTPUT_SIZE(key_type, key_bits, alg)
 *         where \c key_type and \c key_bits are the type and bit-size
 *         respectively of \c key.
 * \retval PSA_ERROR_NOT_SUPPORTED
 * \retval PSA_ERROR_INVALID_ARGUMENT
 * \retval PSA_ERROR_INSUFFICIENT_MEMORY
 * \retval PSA_ERROR_COMMUNICATION_FAILURE
 * \retval PSA_ERROR_HARDWARE_FAILURE
 * \retval PSA_ERROR_TAMPERING_DETECTED
 * \retval PSA_ERROR_INSUFFICIENT_ENTROPY
 * \retval PSA_ERROR_INVALID_PADDING
 */
psa_status_t psa_asymmetric_decrypt(psa_key_slot_t key,
                                    psa_algorithm_t alg,
                                    const uint8_t *input,
                                    size_t input_length,
                                    const uint8_t *salt,
                                    size_t salt_length,
                                    uint8_t *output,
                                    size_t output_size,
                                    size_t *output_length);

/**@}*/

/** \defgroup generation Key generation
 * @{
 */

/**
 * \brief Generate random bytes.
 *
 * \warning This function **can** fail! Callers MUST check the return status
 *          and MUST NOT use the content of the output buffer if the return
 *          status is not #PSA_SUCCESS.
 *
 * \note    To generate a key, use psa_generate_key() instead.
 *
 * \param output            Output buffer for the generated data.
 * \param output_size       Number of bytes to generate and output.
 *
 * \retval PSA_SUCCESS
 * \retval PSA_ERROR_NOT_SUPPORTED
 * \retval PSA_ERROR_INSUFFICIENT_ENTROPY
 * \retval PSA_ERROR_COMMUNICATION_FAILURE
 * \retval PSA_ERROR_HARDWARE_FAILURE
 * \retval PSA_ERROR_TAMPERING_DETECTED
 */
psa_status_t psa_generate_random(uint8_t *output,
                                 size_t output_size);

/**
 * \brief Generate a key or key pair.
 *
 * \param key               Slot where the key will be stored. This must be a
 *                          valid slot for a key of the chosen type. It must
 *                          be unoccupied.
 * \param type              Key type (a \c PSA_KEY_TYPE_XXX value).
 * \param bits              Key size in bits.
 * \param parameters        Extra parameters for key generation. The
 *                          interpretation of this parameter depends on
 *                          \c type. All types support \c NULL to use
 *                          the default parameters specified below.
 * \param parameters_size   Size of the buffer that \p parameters
 *                          points to, in bytes.
 *
 * For any symmetric key type (type such that
 * `PSA_KEY_TYPE_IS_ASYMMETRIC(type)` is false), \c parameters must be
 * \c NULL. For asymmetric key types defined by this specification,
 * the parameter type and the default parameters are defined by the
 * table below. For vendor-defined key types, the vendor documentation
 * shall define the parameter type and the default parameters.
 *
 * Type | Parameter type | Meaning | Parameters used if `parameters == NULL`
 * ---- | -------------- | ------- | ---------------------------------------
 * `PSA_KEY_TYPE_RSA_KEYPAIR` | `unsigned int` | Public exponent | 65537
 *
 * \retval PSA_SUCCESS
 * \retval PSA_ERROR_NOT_SUPPORTED
 * \retval PSA_ERROR_INVALID_ARGUMENT
 * \retval PSA_ERROR_INSUFFICIENT_MEMORY
 * \retval PSA_ERROR_INSUFFICIENT_ENTROPY
 * \retval PSA_ERROR_COMMUNICATION_FAILURE
 * \retval PSA_ERROR_HARDWARE_FAILURE
 * \retval PSA_ERROR_TAMPERING_DETECTED
 */
psa_status_t psa_generate_key(psa_key_slot_t key,
                              psa_key_type_t type,
                              size_t bits,
                              const void *parameters,
                              size_t parameters_size);

/**@}*/

#ifdef __cplusplus
}
#endif

/* The file "crypto_struct.h" contains definitions for
 * implementation-specific structs that are declared above. */
#include "crypto_struct.h"

/* The file "crypto_extra.h" contains vendor-specific definitions. This
 * can include vendor-defined algorithms, extra functions, etc. */
#include "crypto_extra.h"

#endif /* PSA_CRYPTO_H */