cypress: Add support for watchdog timer update in boot image
Add watchdog timer to MCUBootApp plus BlinkyApp to implement additional way of boot/upgrade image operation confirmation.
Signed-off-by: Roman Okhrimenko <roman.okhrimenko@cypress.com>
diff --git a/boot/cypress/libs/watchdog/watchdog.h b/boot/cypress/libs/watchdog/watchdog.h
new file mode 100644
index 0000000..0d45f82
--- /dev/null
+++ b/boot/cypress/libs/watchdog/watchdog.h
@@ -0,0 +1,90 @@
+/***************************************************************************//**
+* \file cy_wdg.h
+*
+* \brief
+* Provides a high level interface for interacting with the Watchdog Timer.
+* This interface abstracts out the chip specific details. If any chip specific
+* functionality is necessary, or performance is critical the low level functions
+* can be used directly.
+*
+********************************************************************************
+* \copyright
+* Copyright 2019-2020 Cypress Semiconductor Corporation
+* SPDX-License-Identifier: Apache-2.0
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+* http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*******************************************************************************/
+
+#pragma once
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "cy_result.h"
+
+/** Initialize and start the WDT
+*
+* The specified timeout must be at least 1ms and at most the WDT's maximum timeout (see cy_wdg_get_max_timeout_ms()).
+* @param[inout] timeout_ms The time in milliseconds before the WDT times out (1ms - max) (see cy_wdg_get_max_timeout_ms())
+* @return The status of the init request
+*
+* Returns CY_RSLT_SUCCESS if the operation was successfull.
+*/
+cy_rslt_t cy_wdg_init(uint32_t timeout_ms);
+
+/** Free the WDT
+*
+* Powers down the WDT.
+* After calling this function no other WDT functions should be called except
+* cy_wdg_init().
+*/
+
+void cy_wdg_free();
+
+/** Resets the WDT
+*
+* This function should be called periodically to prevent the WDT from timing out and resetting the device.
+*/
+void cy_wdg_kick();
+
+/** Start (enable) the WDT
+*
+* @return The status of the start request
+*/
+void cy_wdg_start();
+
+/** Stop (disable) the WDT
+*
+* @return The status of the stop request
+*/
+void cy_wdg_stop();
+
+/** Get the WDT timeout
+*
+* Gets the time in milliseconds before the WDT times out.
+* @return The time in milliseconds before the WDT times out
+*/
+uint32_t cy_wdg_get_timeout_ms();
+
+/** Gets the maximum WDT timeout in milliseconds
+*
+* @return The maximum timeout for the WDT
+*/
+uint32_t cy_wdg_get_max_timeout_ms(void);
+
+#if defined(__cplusplus)
+}
+#endif