diff --git a/include/drivers/arm/gic_v2.h b/include/drivers/arm/gic_v2.h
index 3a3d7aa..258b898 100644
--- a/include/drivers/arm/gic_v2.h
+++ b/include/drivers/arm/gic_v2.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -7,6 +7,9 @@
 #ifndef __GIC_V2_H__
 #define __GIC_V2_H__
 
+/* The macros required here are additional to those in gic_common.h. */
+#include <gic_common.h>
+
 /******************************************************************************
  * THIS DRIVER IS DEPRECATED. For GICv2 systems, use the driver in gicv2.h
  * and for GICv3 systems, use the driver in gicv3.h.
@@ -19,50 +22,20 @@
 #define MAX_PPIS		U(14)
 #define MAX_SGIS		U(16)
 
-#define MIN_SGI_ID		U(0)
-#define MIN_PPI_ID		U(16)
-#define MIN_SPI_ID		U(32)
 
 #define GRP0			U(0)
 #define GRP1			U(1)
-#define GIC_PRI_MASK		U(0xff)
-#define GIC_HIGHEST_SEC_PRIORITY U(0)
-#define GIC_LOWEST_SEC_PRIORITY	U(127)
-#define GIC_HIGHEST_NS_PRIORITY	U(128)
-#define GIC_LOWEST_NS_PRIORITY	U(254) /* 255 would disable an interrupt */
-#define GIC_SPURIOUS_INTERRUPT	U(1023)
 #define GIC_TARGET_CPU_MASK	U(0xff)
 
 #define ENABLE_GRP0		(U(1) << 0)
 #define ENABLE_GRP1		(U(1) << 1)
 
 /* Distributor interface definitions */
-#define GICD_CTLR		U(0x0)
-#define GICD_TYPER		U(0x4)
-#define GICD_IGROUPR		U(0x80)
-#define GICD_ISENABLER		U(0x100)
-#define GICD_ICENABLER		U(0x180)
-#define GICD_ISPENDR		U(0x200)
-#define GICD_ICPENDR		U(0x280)
-#define GICD_ISACTIVER		U(0x300)
-#define GICD_ICACTIVER		U(0x380)
-#define GICD_IPRIORITYR		U(0x400)
 #define GICD_ITARGETSR		U(0x800)
-#define GICD_ICFGR		U(0xC00)
 #define GICD_SGIR		U(0xF00)
 #define GICD_CPENDSGIR		U(0xF10)
 #define GICD_SPENDSGIR		U(0xF20)
 
-#define IGROUPR_SHIFT		U(5)
-#define ISENABLER_SHIFT		U(5)
-#define ICENABLER_SHIFT		ISENABLER_SHIFT
-#define ISPENDR_SHIFT		U(5)
-#define ICPENDR_SHIFT		ISPENDR_SHIFT
-#define ISACTIVER_SHIFT		U(5)
-#define ICACTIVER_SHIFT		ISACTIVER_SHIFT
-#define IPRIORITYR_SHIFT	U(2)
-#define ITARGETSR_SHIFT		U(2)
-#define ICFGR_SHIFT		U(4)
 #define CPENDSGIR_SHIFT		U(2)
 #define SPENDSGIR_SHIFT		CPENDSGIR_SHIFT
 
diff --git a/include/plat/arm/common/arm_def.h b/include/plat/arm/common/arm_def.h
index dbf102b..c84fabd 100644
--- a/include/plat/arm/common/arm_def.h
+++ b/include/plat/arm/common/arm_def.h
@@ -8,6 +8,8 @@
 
 #include <arch.h>
 #include <common_def.h>
+#include <gic_common.h>
+#include <interrupt_props.h>
 #include <platform_def.h>
 #include <tbbr_img_def.h>
 #include <utils_def.h>
@@ -152,9 +154,8 @@
 #define ARM_IRQ_SEC_SGI_7		15
 
 /*
- * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3
- * terminology. On a GICv2 system or mode, the lists will be merged and treated
- * as Group 0 interrupts.
+ * List of secure interrupts are deprecated, but are retained only to support
+ * legacy configurations.
  */
 #define ARM_G1S_IRQS			ARM_IRQ_SEC_PHY_TIMER,		\
 					ARM_IRQ_SEC_SGI_1,		\
@@ -167,6 +168,33 @@
 #define ARM_G0_IRQS			ARM_IRQ_SEC_SGI_0,		\
 					ARM_IRQ_SEC_SGI_6
 
+/*
+ * Define a list of Group 1 Secure and Group 0 interrupt properties as per GICv3
+ * terminology. On a GICv2 system or mode, the lists will be merged and treated
+ * as Group 0 interrupts.
+ */
+#define ARM_G1S_IRQ_PROPS(grp) \
+	INTR_PROP_DESC(ARM_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(ARM_IRQ_SEC_SGI_1, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(ARM_IRQ_SEC_SGI_2, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(ARM_IRQ_SEC_SGI_3, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(ARM_IRQ_SEC_SGI_4, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(ARM_IRQ_SEC_SGI_5, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(ARM_IRQ_SEC_SGI_7, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE)
+
+#define ARM_G0_IRQ_PROPS(grp) \
+	INTR_PROP_DESC(ARM_IRQ_SEC_SGI_0, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(ARM_IRQ_SEC_SGI_6, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE)
+
 #define ARM_MAP_SHARED_RAM		MAP_REGION_FLAT(		\
 						ARM_SHARED_RAM_BASE,	\
 						ARM_SHARED_RAM_SIZE,	\
diff --git a/include/plat/arm/css/common/css_def.h b/include/plat/arm/css/common/css_def.h
index ac0769c..a2c0b4e 100644
--- a/include/plat/arm/css/common/css_def.h
+++ b/include/plat/arm/css/common/css_def.h
@@ -8,6 +8,8 @@
 #define __CSS_DEF_H__
 
 #include <arm_def.h>
+#include <gic_common.h>
+#include <interrupt_props.h>
 #include <tzc400.h>
 
 /*************************************************************************
@@ -41,14 +43,21 @@
 #define MHU_CPU_INTR_S_SET_OFFSET	0x308
 
 /*
- * Define a list of Group 1 Secure interrupts as per GICv3 terminology. On a
- * GICv2 system or mode, the interrupts will be treated as Group 0 interrupts.
+ * Define a list of Group 1 Secure interrupt properties as per GICv3
+ * terminology. On a GICv2 system or mode, the interrupts will be treated as
+ * Group 0 interrupts.
  */
-#define CSS_G1S_IRQS			CSS_IRQ_MHU,		\
-					CSS_IRQ_GPU_SMMU_0,	\
-					CSS_IRQ_TZC,		\
-					CSS_IRQ_TZ_WDOG,	\
-					CSS_IRQ_SEC_SYS_TIMER
+#define CSS_G1S_IRQ_PROPS(grp) \
+	INTR_PROP_DESC(CSS_IRQ_MHU, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(CSS_IRQ_GPU_SMMU_0, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(CSS_IRQ_TZC, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(CSS_IRQ_TZ_WDOG, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(CSS_IRQ_SEC_SYS_TIMER, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL)
 
 #if CSS_USE_SCMI_SDS_DRIVER
 /* Memory region for shared data storage */
diff --git a/plat/arm/board/fvp/include/platform_def.h b/plat/arm/board/fvp/include/platform_def.h
index e4f9425..e953580 100644
--- a/plat/arm/board/fvp/include/platform_def.h
+++ b/plat/arm/board/fvp/include/platform_def.h
@@ -136,4 +136,13 @@
 
 #define PLAT_ARM_G0_IRQS		ARM_G0_IRQS
 
+#define PLAT_ARM_G1S_IRQ_PROPS(grp) \
+	ARM_G1S_IRQ_PROPS(grp), \
+	INTR_PROP_DESC(FVP_IRQ_TZ_WDOG, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(FVP_IRQ_SEC_SYS_TIMER, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL)
+
+#define PLAT_ARM_G0_IRQ_PROPS(grp)	ARM_G0_IRQ_PROPS(grp)
+
 #endif /* __PLATFORM_DEF_H__ */
diff --git a/plat/arm/board/juno/include/platform_def.h b/plat/arm/board/juno/include/platform_def.h
index 3c44a1e..395d1fb 100644
--- a/plat/arm/board/juno/include/platform_def.h
+++ b/plat/arm/board/juno/include/platform_def.h
@@ -193,23 +193,27 @@
  */
 #define PLAT_CSS_MAX_SCP_BL2U_SIZE	0x14000
 
-/*
- * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3
- * terminology. On a GICv2 system or mode, the lists will be merged and treated
- * as Group 0 interrupts.
- */
-#define PLAT_ARM_G1S_IRQS		CSS_G1S_IRQS,			\
-					ARM_G1S_IRQS,			\
-					JUNO_IRQ_DMA_SMMU,		\
-					JUNO_IRQ_HDLCD0_SMMU,		\
-					JUNO_IRQ_HDLCD1_SMMU,		\
-					JUNO_IRQ_USB_SMMU,		\
-					JUNO_IRQ_THIN_LINKS_SMMU,	\
-					JUNO_IRQ_SEC_I2C,		\
-					JUNO_IRQ_GPU_SMMU_1,		\
-					JUNO_IRQ_ETR_SMMU
+#define PLAT_ARM_G1S_IRQ_PROPS(grp) \
+	CSS_G1S_IRQ_PROPS(grp), \
+	ARM_G1S_IRQ_PROPS(grp), \
+	INTR_PROP_DESC(JUNO_IRQ_DMA_SMMU, GIC_HIGHEST_SEC_PRIORITY, \
+		grp, GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(JUNO_IRQ_HDLCD0_SMMU, GIC_HIGHEST_SEC_PRIORITY, \
+		grp, GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(JUNO_IRQ_HDLCD1_SMMU, GIC_HIGHEST_SEC_PRIORITY, \
+		grp, GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(JUNO_IRQ_USB_SMMU, GIC_HIGHEST_SEC_PRIORITY, \
+		grp, GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(JUNO_IRQ_THIN_LINKS_SMMU, GIC_HIGHEST_SEC_PRIORITY, \
+		grp, GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(JUNO_IRQ_SEC_I2C, GIC_HIGHEST_SEC_PRIORITY, \
+		grp, GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(JUNO_IRQ_GPU_SMMU_1, GIC_HIGHEST_SEC_PRIORITY, \
+		grp, GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(JUNO_IRQ_ETR_SMMU, GIC_HIGHEST_SEC_PRIORITY, \
+		grp, GIC_INTR_CFG_LEVEL)
 
-#define PLAT_ARM_G0_IRQS		ARM_G0_IRQS
+#define PLAT_ARM_G0_IRQ_PROPS(grp)	ARM_G0_IRQ_PROPS(grp)
 
 /*
  * Required ARM CSS SoC based platform porting definitions
diff --git a/plat/arm/common/arm_gicv2.c b/plat/arm/common/arm_gicv2.c
index 6dd847b..aac0248 100644
--- a/plat/arm/common/arm_gicv2.c
+++ b/plat/arm/common/arm_gicv2.c
@@ -23,9 +23,9 @@
  * On a GICv2 system, the Group 1 secure interrupts are treated as Group 0
  * interrupts.
  *****************************************************************************/
-static const unsigned int g0_interrupt_array[] = {
-	PLAT_ARM_G1S_IRQS,
-	PLAT_ARM_G0_IRQS
+static const interrupt_prop_t arm_interrupt_props[] = {
+	PLAT_ARM_G1S_IRQ_PROPS(GICV2_INTR_GROUP0),
+	PLAT_ARM_G0_IRQ_PROPS(GICV2_INTR_GROUP0)
 };
 
 static unsigned int target_mask_array[PLATFORM_CORE_COUNT];
@@ -33,8 +33,8 @@
 static const gicv2_driver_data_t arm_gic_data = {
 	.gicd_base = PLAT_ARM_GICD_BASE,
 	.gicc_base = PLAT_ARM_GICC_BASE,
-	.g0_interrupt_num = ARRAY_SIZE(g0_interrupt_array),
-	.g0_interrupt_array = g0_interrupt_array,
+	.interrupt_props = arm_interrupt_props,
+	.interrupt_props_num = ARRAY_SIZE(arm_interrupt_props),
 	.target_masks = target_mask_array,
 	.target_masks_num = ARRAY_SIZE(target_mask_array),
 };
diff --git a/plat/arm/common/arm_gicv3.c b/plat/arm/common/arm_gicv3.c
index c9bba09..cec6a9d 100644
--- a/plat/arm/common/arm_gicv3.c
+++ b/plat/arm/common/arm_gicv3.c
@@ -6,6 +6,7 @@
 
 #include <arm_def.h>
 #include <gicv3.h>
+#include <interrupt_props.h>
 #include <plat_arm.h>
 #include <platform.h>
 #include <platform_def.h>
@@ -25,14 +26,9 @@
 /* The GICv3 driver only needs to be initialized in EL3 */
 static uintptr_t rdistif_base_addrs[PLATFORM_CORE_COUNT];
 
-/* Array of Group1 secure interrupts to be configured by the gic driver */
-static const unsigned int g1s_interrupt_array[] = {
-	PLAT_ARM_G1S_IRQS
-};
-
-/* Array of Group0 interrupts to be configured by the gic driver */
-static const unsigned int g0_interrupt_array[] = {
-	PLAT_ARM_G0_IRQS
+static const interrupt_prop_t arm_interrupt_props[] = {
+	PLAT_ARM_G1S_IRQ_PROPS(INTR_GROUP1S),
+	PLAT_ARM_G0_IRQ_PROPS(INTR_GROUP0)
 };
 
 /*
@@ -58,10 +54,8 @@
 const gicv3_driver_data_t arm_gic_data = {
 	.gicd_base = PLAT_ARM_GICD_BASE,
 	.gicr_base = PLAT_ARM_GICR_BASE,
-	.g0_interrupt_num = ARRAY_SIZE(g0_interrupt_array),
-	.g1s_interrupt_num = ARRAY_SIZE(g1s_interrupt_array),
-	.g0_interrupt_array = g0_interrupt_array,
-	.g1s_interrupt_array = g1s_interrupt_array,
+	.interrupt_props = arm_interrupt_props,
+	.interrupt_props_num = ARRAY_SIZE(arm_interrupt_props),
 	.rdistif_num = PLATFORM_CORE_COUNT,
 	.rdistif_base_addrs = rdistif_base_addrs,
 	.mpidr_to_core_pos = arm_gicv3_mpidr_hash