diff --git a/docs/porting-guide.md b/docs/porting-guide.md
index 74a0a85..67caa04 100644
--- a/docs/porting-guide.md
+++ b/docs/porting-guide.md
@@ -443,7 +443,19 @@
 *   **#define : ADDR_SPACE_SIZE**
 
     Defines the total size of the address space in bytes. For example, for a 32
-    bit address space, this value should be `(1ull << 32)`.
+    bit address space, this value should be `(1ull << 32)`. This definition is
+    now deprecated, platforms should use `PLAT_PHY_ADDR_SPACE_SIZE` and
+    `PLAT_VIRT_ADDR_SPACE_SIZE` instead.
+
+*   **#define : PLAT_VIRT_ADDR_SPACE_SIZE**
+
+    Defines the total size of the virtual address space in bytes. For example,
+    for a 32 bit virtual address space, this value should be `(1ull << 32)`.
+
+*   **#define : PLAT_PHY_ADDR_SPACE_SIZE**
+
+    Defines the total size of the physical address space in bytes. For example,
+    for a 32 bit physical address space, this value should be `(1ull << 32)`.
 
 If the platform port uses the IO storage framework, the following constants
 must also be defined:
diff --git a/include/lib/aarch64/arch.h b/include/lib/aarch64/arch.h
index a034ae2..989667a 100644
--- a/include/lib/aarch64/arch.h
+++ b/include/lib/aarch64/arch.h
@@ -134,6 +134,16 @@
 #define ID_AA64PFR0_GIC_WIDTH	4
 #define ID_AA64PFR0_GIC_MASK	((1 << ID_AA64PFR0_GIC_WIDTH) - 1)
 
+/* ID_AA64MMFR0_EL1 definitions */
+#define ID_AA64MMFR0_EL1_PARANGE_MASK	0xf
+
+#define PARANGE_0000	32
+#define PARANGE_0001	36
+#define PARANGE_0010	40
+#define PARANGE_0011	42
+#define PARANGE_0100	44
+#define PARANGE_0101	48
+
 /* ID_PFR1_EL1 definitions */
 #define ID_PFR1_VIRTEXT_SHIFT	12
 #define ID_PFR1_VIRTEXT_MASK	0xf
diff --git a/include/lib/aarch64/arch_helpers.h b/include/lib/aarch64/arch_helpers.h
index a013809..aa26203 100644
--- a/include/lib/aarch64/arch_helpers.h
+++ b/include/lib/aarch64/arch_helpers.h
@@ -196,6 +196,7 @@
  ******************************************************************************/
 DEFINE_SYSREG_READ_FUNC(midr_el1)
 DEFINE_SYSREG_READ_FUNC(mpidr_el1)
+DEFINE_SYSREG_READ_FUNC(id_aa64mmfr0_el1)
 
 DEFINE_SYSREG_RW_FUNCS(scr_el3)
 DEFINE_SYSREG_RW_FUNCS(hcr_el2)
diff --git a/lib/xlat_tables/aarch32/xlat_tables.c b/lib/xlat_tables/aarch32/xlat_tables.c
index d70a6ef..e8408da 100644
--- a/lib/xlat_tables/aarch32/xlat_tables.c
+++ b/lib/xlat_tables/aarch32/xlat_tables.c
@@ -39,49 +39,60 @@
 
 /*
  * Each platform can define the size of the virtual address space, which is
- * defined in ADDR_SPACE_SIZE. TTBCR.TxSZ is calculated as 32 minus the width
- * of said address space. The value of TTBCR.TxSZ must be in the range 0 to
- * 7 [1], which means that the virtual address space width must be in the range
- * 32 to 25 bits.
+ * defined in PLAT_VIRT_ADDR_SPACE_SIZE. TTBCR.TxSZ is calculated as 32 minus
+ * the width of said address space. The value of TTBCR.TxSZ must be in the
+ * range 0 to 7 [1], which means that the virtual address space width must be
+ * in the range 32 to 25 bits.
  *
- * Here we calculate the initial lookup level from the value of ADDR_SPACE_SIZE.
- * For a 4 KB page size, level 1 supports virtual address spaces of widths 32
- * to 31 bits, and level 2 from 30 to 25. Wider or narrower address spaces are
- * not supported. As a result, level 3 cannot be used as initial lookup level
- * with 4 KB granularity [1].
+ * Here we calculate the initial lookup level from the value of
+ * PLAT_VIRT_ADDR_SPACE_SIZE. For a 4 KB page size, level 1 supports virtual
+ * address spaces of widths 32 to 31 bits, and level 2 from 30 to 25. Wider or
+ * narrower address spaces are not supported. As a result, level 3 cannot be
+ * used as initial lookup level with 4 KB granularity [1].
  *
- * For example, for a 31-bit address space (i.e. ADDR_SPACE_SIZE == 1 << 31),
- * TTBCR.TxSZ will be programmed to (32 - 31) = 1. According to Table G4-5 in
- * the ARM ARM, the initial lookup level for such an address space is 1.
+ * For example, for a 31-bit address space (i.e. PLAT_VIRT_ADDR_SPACE_SIZE ==
+ * 1 << 31), TTBCR.TxSZ will be programmed to (32 - 31) = 1. According to Table
+ * G4-5 in the ARM ARM, the initial lookup level for an address space like that
+ * is 1.
  *
  * See the ARMv8-A Architecture Reference Manual (DDI 0487A.j) for more
  * information:
  * [1] Section G4.6.5
  */
 
-#if ADDR_SPACE_SIZE > (1ULL << (32 - TTBCR_TxSZ_MIN))
+#if PLAT_VIRT_ADDR_SPACE_SIZE > (1ULL << (32 - TTBCR_TxSZ_MIN))
 
-# error "ADDR_SPACE_SIZE is too big."
+# error "PLAT_VIRT_ADDR_SPACE_SIZE is too big."
 
-#elif ADDR_SPACE_SIZE > (1 << L1_XLAT_ADDRESS_SHIFT)
+#elif PLAT_VIRT_ADDR_SPACE_SIZE > (1 << L1_XLAT_ADDRESS_SHIFT)
 
 # define XLAT_TABLE_LEVEL_BASE	1
-# define NUM_BASE_LEVEL_ENTRIES	(ADDR_SPACE_SIZE >> L1_XLAT_ADDRESS_SHIFT)
+# define NUM_BASE_LEVEL_ENTRIES	\
+		(PLAT_VIRT_ADDR_SPACE_SIZE >> L1_XLAT_ADDRESS_SHIFT)
 
-#elif ADDR_SPACE_SIZE >= (1 << (32 - TTBCR_TxSZ_MAX))
+#elif PLAT_VIRT_ADDR_SPACE_SIZE >= (1 << (32 - TTBCR_TxSZ_MAX))
 
 # define XLAT_TABLE_LEVEL_BASE	2
-# define NUM_BASE_LEVEL_ENTRIES	(ADDR_SPACE_SIZE >> L2_XLAT_ADDRESS_SHIFT)
+# define NUM_BASE_LEVEL_ENTRIES	\
+		(PLAT_VIRT_ADDR_SPACE_SIZE >> L2_XLAT_ADDRESS_SHIFT)
 
 #else
 
-# error "ADDR_SPACE_SIZE is too small."
+# error "PLAT_VIRT_ADDR_SPACE_SIZE is too small."
 
 #endif
 
 static uint64_t base_xlation_table[NUM_BASE_LEVEL_ENTRIES]
 		__aligned(NUM_BASE_LEVEL_ENTRIES * sizeof(uint64_t));
 
+#if DEBUG
+static unsigned long long get_max_supported_pa(void)
+{
+	/* Physical address space size for long descriptor format. */
+	return (1ULL << 40) - 1ULL;
+}
+#endif
+
 void init_xlat_tables(void)
 {
 	unsigned long long max_pa;
@@ -89,7 +100,10 @@
 	print_mmap();
 	init_xlation_table(0, base_xlation_table, XLAT_TABLE_LEVEL_BASE,
 						&max_va, &max_pa);
-	assert(max_va < ADDR_SPACE_SIZE);
+
+	assert(max_va <= PLAT_VIRT_ADDR_SPACE_SIZE - 1);
+	assert(max_pa <= PLAT_PHY_ADDR_SPACE_SIZE - 1);
+	assert((PLAT_PHY_ADDR_SPACE_SIZE - 1) <= get_max_supported_pa());
 }
 
 /*******************************************************************************
@@ -122,7 +136,7 @@
 	ttbcr = TTBCR_EAE_BIT |
 		TTBCR_SH0_INNER_SHAREABLE | TTBCR_RGN0_OUTER_WBA |
 		TTBCR_RGN0_INNER_WBA |
-		(32 - __builtin_ctzl((uintptr_t)ADDR_SPACE_SIZE));
+		(32 - __builtin_ctzl((uintptr_t)PLAT_VIRT_ADDR_SPACE_SIZE));
 	ttbcr |= TTBCR_EPD1_BIT;
 	write_ttbcr(ttbcr);
 
diff --git a/lib/xlat_tables/aarch64/xlat_tables.c b/lib/xlat_tables/aarch64/xlat_tables.c
index 5b639b7..a168636 100644
--- a/lib/xlat_tables/aarch64/xlat_tables.c
+++ b/lib/xlat_tables/aarch64/xlat_tables.c
@@ -31,28 +31,33 @@
 #include <arch.h>
 #include <arch_helpers.h>
 #include <assert.h>
+#include <bl_common.h>
 #include <cassert.h>
+#include <common_def.h>
 #include <platform_def.h>
+#include <sys/types.h>
 #include <utils.h>
 #include <xlat_tables.h>
 #include "../xlat_tables_private.h"
 
 /*
  * Each platform can define the size of the virtual address space, which is
- * defined in ADDR_SPACE_SIZE. TCR.TxSZ is calculated as 64 minus the width of
- * said address space. The value of TCR.TxSZ must be in the range 16 to 39 [1],
- * which means that the virtual address space width must be in the range 48 to
- * 25 bits.
+ * defined in PLAT_VIRT_ADDR_SPACE_SIZE. TCR.TxSZ is calculated as 64 minus the
+ * width of said address space. The value of TCR.TxSZ must be in the range 16
+ * to 39 [1], which means that the virtual address space width must be in the
+ * range 48 to 25 bits.
  *
- * Here we calculate the initial lookup level from the value of ADDR_SPACE_SIZE.
- * For a 4 KB page size, level 0 supports virtual address spaces of widths 48 to
- * 40 bits, level 1 from 39 to 31, and level 2 from 30 to 25. Wider or narrower
- * address spaces are not supported. As a result, level 3 cannot be used as
- * initial lookup level with 4 KB granularity. [2]
+ * Here we calculate the initial lookup level from the value of
+ * PLAT_VIRT_ADDR_SPACE_SIZE. For a 4 KB page size, level 0 supports virtual
+ * address spaces of widths 48 to 40 bits, level 1 from 39 to 31, and level 2
+ * from 30 to 25. Wider or narrower address spaces are not supported. As a
+ * result, level 3 cannot be used as initial lookup level with 4 KB
+ * granularity. [2]
  *
- * For example, for a 35-bit address space (i.e. ADDR_SPACE_SIZE == 1 << 35),
- * TCR.TxSZ will be programmed to (64 - 35) = 29. According to Table D4-11 in
- * the ARM ARM, the initial lookup level for such an address space is 1.
+ * For example, for a 35-bit address space (i.e. PLAT_VIRT_ADDR_SPACE_SIZE ==
+ * 1 << 35), TCR.TxSZ will be programmed to (64 - 35) = 29. According to Table
+ * D4-11 in the ARM ARM, the initial lookup level for an address space like
+ * that is 1.
  *
  * See the ARMv8-A Architecture Reference Manual (DDI 0487A.j) for more
  * information:
@@ -60,28 +65,31 @@
  * [2] Section D4.2.5
  */
 
-#if ADDR_SPACE_SIZE > (1ULL << (64 - TCR_TxSZ_MIN))
+#if PLAT_VIRT_ADDR_SPACE_SIZE > (1ULL << (64 - TCR_TxSZ_MIN))
 
-# error "ADDR_SPACE_SIZE is too big."
+# error "PLAT_VIRT_ADDR_SPACE_SIZE is too big."
 
-#elif ADDR_SPACE_SIZE > (1ULL << L0_XLAT_ADDRESS_SHIFT)
+#elif PLAT_VIRT_ADDR_SPACE_SIZE > (1ULL << L0_XLAT_ADDRESS_SHIFT)
 
 # define XLAT_TABLE_LEVEL_BASE	0
-# define NUM_BASE_LEVEL_ENTRIES	(ADDR_SPACE_SIZE >> L0_XLAT_ADDRESS_SHIFT)
+# define NUM_BASE_LEVEL_ENTRIES	\
+		(PLAT_VIRT_ADDR_SPACE_SIZE >> L0_XLAT_ADDRESS_SHIFT)
 
-#elif ADDR_SPACE_SIZE > (1 << L1_XLAT_ADDRESS_SHIFT)
+#elif PLAT_VIRT_ADDR_SPACE_SIZE > (1 << L1_XLAT_ADDRESS_SHIFT)
 
 # define XLAT_TABLE_LEVEL_BASE	1
-# define NUM_BASE_LEVEL_ENTRIES	(ADDR_SPACE_SIZE >> L1_XLAT_ADDRESS_SHIFT)
+# define NUM_BASE_LEVEL_ENTRIES	\
+		(PLAT_VIRT_ADDR_SPACE_SIZE >> L1_XLAT_ADDRESS_SHIFT)
 
-#elif ADDR_SPACE_SIZE >= (1 << (64 - TCR_TxSZ_MAX))
+#elif PLAT_VIRT_ADDR_SPACE_SIZE >= (1 << (64 - TCR_TxSZ_MAX))
 
 # define XLAT_TABLE_LEVEL_BASE	2
-# define NUM_BASE_LEVEL_ENTRIES	(ADDR_SPACE_SIZE >> L2_XLAT_ADDRESS_SHIFT)
+# define NUM_BASE_LEVEL_ENTRIES	\
+		(PLAT_VIRT_ADDR_SPACE_SIZE >> L2_XLAT_ADDRESS_SHIFT)
 
 #else
 
-# error "ADDR_SPACE_SIZE is too small."
+# error "PLAT_VIRT_ADDR_SPACE_SIZE is too small."
 
 #endif
 
@@ -119,6 +127,25 @@
 	return TCR_PS_BITS_4GB;
 }
 
+#if DEBUG
+/* Physical Address ranges supported in the AArch64 Memory Model */
+static const unsigned int pa_range_bits_arr[] = {
+	PARANGE_0000, PARANGE_0001, PARANGE_0010, PARANGE_0011, PARANGE_0100,
+	PARANGE_0101
+};
+
+static unsigned long long get_max_supported_pa(void)
+{
+	u_register_t pa_range = read_id_aa64mmfr0_el1() &
+						ID_AA64MMFR0_EL1_PARANGE_MASK;
+
+	/* All other values are reserved */
+	assert(pa_range < ARRAY_SIZE(pa_range_bits_arr));
+
+	return (1ULL << pa_range_bits_arr[pa_range]) - 1ULL;
+}
+#endif
+
 void init_xlat_tables(void)
 {
 	unsigned long long max_pa;
@@ -126,8 +153,12 @@
 	print_mmap();
 	init_xlation_table(0, base_xlation_table, XLAT_TABLE_LEVEL_BASE,
 			   &max_va, &max_pa);
+
+	assert(max_va <= PLAT_VIRT_ADDR_SPACE_SIZE - 1);
+	assert(max_pa <= PLAT_PHY_ADDR_SPACE_SIZE - 1);
+	assert((PLAT_PHY_ADDR_SPACE_SIZE - 1) <= get_max_supported_pa());
+
 	tcr_ps_bits = calc_physical_addr_size_bits(max_pa);
-	assert(max_va < ADDR_SPACE_SIZE);
 }
 
 /*******************************************************************************
@@ -165,7 +196,7 @@
 		/* Set T0SZ to (64 - width of virtual address space) */	\
 		tcr = TCR_SH_INNER_SHAREABLE | TCR_RGN_OUTER_WBA |	\
 			TCR_RGN_INNER_WBA |				\
-			(64 - __builtin_ctzl(ADDR_SPACE_SIZE));		\
+			(64 - __builtin_ctzl(PLAT_VIRT_ADDR_SPACE_SIZE));\
 		tcr |= _tcr_extra;					\
 		write_tcr_el##_el(tcr);					\
 									\
diff --git a/lib/xlat_tables/xlat_tables_common.c b/lib/xlat_tables/xlat_tables_common.c
index 808aa33..448d25d 100644
--- a/lib/xlat_tables/xlat_tables_common.c
+++ b/lib/xlat_tables/xlat_tables_common.c
@@ -32,12 +32,14 @@
 #include <arch_helpers.h>
 #include <assert.h>
 #include <cassert.h>
+#include <common_def.h>
 #include <debug.h>
 #include <platform_def.h>
 #include <string.h>
 #include <types.h>
 #include <utils.h>
 #include <xlat_tables.h>
+#include "xlat_tables_private.h"
 
 #if LOG_LEVEL >= LOG_LEVEL_VERBOSE
 #define LVL0_SPACER ""
@@ -102,6 +104,11 @@
 	assert(base_pa < end_pa); /* Check for overflows */
 	assert(base_va < end_va);
 
+	assert((base_va + (uintptr_t)size - (uintptr_t)1) <=
+					(PLAT_VIRT_ADDR_SPACE_SIZE - 1));
+	assert((base_pa + (unsigned long long)size - 1ULL) <=
+					(PLAT_PHY_ADDR_SPACE_SIZE - 1));
+
 #if DEBUG
 
 	/* Check for PAs and VAs overlaps with all other regions */
@@ -375,7 +382,8 @@
 
 		*table++ = desc;
 		base_va += level_size;
-	} while ((base_va & level_index_mask) && (base_va - 1 < ADDR_SPACE_SIZE - 1));
+	} while ((base_va & level_index_mask) &&
+		 (base_va - 1 < PLAT_VIRT_ADDR_SPACE_SIZE - 1));
 
 	return mm;
 }
diff --git a/lib/xlat_tables/xlat_tables_private.h b/lib/xlat_tables/xlat_tables_private.h
index 159d071..085a0c2 100644
--- a/lib/xlat_tables/xlat_tables_private.h
+++ b/lib/xlat_tables/xlat_tables_private.h
@@ -32,10 +32,31 @@
 #define __XLAT_TABLES_PRIVATE_H__
 
 #include <cassert.h>
+#include <platform_def.h>
 #include <utils.h>
 
-/* The virtual address space size must be a power of two. */
-CASSERT(IS_POWER_OF_TWO(ADDR_SPACE_SIZE), assert_valid_addr_space_size);
+/*
+ * If the platform hasn't defined a physical and a virtual address space size
+ * default to ADDR_SPACE_SIZE.
+ */
+#if ERROR_DEPRECATED
+# ifdef ADDR_SPACE_SIZE
+#  error "ADDR_SPACE_SIZE is deprecated. Use PLAT_xxx_ADDR_SPACE_SIZE instead."
+# endif
+#elif defined(ADDR_SPACE_SIZE)
+# ifndef PLAT_PHY_ADDR_SPACE_SIZE
+#  define PLAT_PHY_ADDR_SPACE_SIZE	ADDR_SPACE_SIZE
+# endif
+# ifndef PLAT_VIRT_ADDR_SPACE_SIZE
+#  define PLAT_VIRT_ADDR_SPACE_SIZE	ADDR_SPACE_SIZE
+# endif
+#endif
+
+/* The virtual and physical address space sizes must be powers of two. */
+CASSERT(IS_POWER_OF_TWO(PLAT_VIRT_ADDR_SPACE_SIZE),
+	assert_valid_virt_addr_space_size);
+CASSERT(IS_POWER_OF_TWO(PLAT_PHY_ADDR_SPACE_SIZE),
+	assert_valid_phy_addr_space_size);
 
 void print_mmap(void);
 void init_xlation_table(uintptr_t base_va, uint64_t *table,