diff --git a/plat/fvp/aarch64/fvp_common.c b/plat/fvp/aarch64/fvp_common.c
index a8afb4e..a876313 100644
--- a/plat/fvp/aarch64/fvp_common.c
+++ b/plat/fvp/aarch64/fvp_common.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -28,35 +28,24 @@
  * POSSIBILITY OF SUCH DAMAGE.
  */
 
-#include <arch.h>
-#include <arch_helpers.h>
+#include <arm_config.h>
+#include <arm_def.h>
 #include <arm_gic.h>
-#include <bl_common.h>
 #include <cci.h>
 #include <debug.h>
 #include <mmio.h>
-#include <platform.h>
-#include <platform_def.h>
-#include <plat_config.h>
-#include <xlat_tables.h>
+#include <plat_arm.h>
+#include <v2m_def.h>
 #include "../fvp_def.h"
 
 /*******************************************************************************
- * plat_config holds the characteristics of the differences between the three
- * FVP platforms (Base, A53_A57 & Foundation). It will be populated during cold
- * boot at each boot stage by the primary before enabling the MMU (to allow cci
+ * arm_config holds the characteristics of the differences between the three FVP
+ * platforms (Base, A53_A57 & Foundation). It will be populated during cold boot
+ * at each boot stage by the primary before enabling the MMU (to allow cci
  * configuration) & used thereafter. Each BL will have its own copy to allow
  * independent operation.
  ******************************************************************************/
-plat_config_t plat_config;
-
-#define MAP_SHARED_RAM	MAP_REGION_FLAT(FVP_SHARED_MEM_BASE,		\
-					FVP_SHARED_MEM_SIZE,		\
-					MT_MEMORY | MT_RW | MT_SECURE)
-
-#define MAP_FLASH0	MAP_REGION_FLAT(FLASH0_BASE,			\
-					FLASH0_SIZE,			\
-					MT_MEMORY | MT_RO | MT_SECURE)
+arm_config_t arm_config;
 
 #define MAP_DEVICE0	MAP_REGION_FLAT(DEVICE0_BASE,			\
 					DEVICE0_SIZE,			\
@@ -66,122 +55,79 @@
 					DEVICE1_SIZE,			\
 					MT_DEVICE | MT_RW | MT_SECURE)
 
-#define MAP_DRAM1_NS	MAP_REGION_FLAT(DRAM1_NS_BASE,			\
-					DRAM1_NS_SIZE,			\
-					MT_MEMORY | MT_RW | MT_NS)
-
-#define MAP_TSP_SEC_MEM	MAP_REGION_FLAT(TSP_SEC_MEM_BASE,		\
-					TSP_SEC_MEM_SIZE,		\
-					MT_MEMORY | MT_RW | MT_SECURE)
-
 /*
  * Table of regions for various BL stages to map using the MMU.
  * This doesn't include TZRAM as the 'mem_layout' argument passed to
- * configure_mmu_elx() will give the available subset of that,
+ * arm_configure_mmu_elx() will give the available subset of that,
  */
 #if IMAGE_BL1
-const mmap_region_t fvp_mmap[] = {
-	MAP_SHARED_RAM,
-	MAP_FLASH0,
+const mmap_region_t plat_arm_mmap[] = {
+	ARM_MAP_SHARED_RAM,
+	V2M_MAP_FLASH0,
+	V2M_MAP_IOFPGA,
 	MAP_DEVICE0,
 	MAP_DEVICE1,
 	{0}
 };
 #endif
 #if IMAGE_BL2
-const mmap_region_t fvp_mmap[] = {
-	MAP_SHARED_RAM,
-	MAP_FLASH0,
+const mmap_region_t plat_arm_mmap[] = {
+	ARM_MAP_SHARED_RAM,
+	V2M_MAP_FLASH0,
+	V2M_MAP_IOFPGA,
 	MAP_DEVICE0,
 	MAP_DEVICE1,
-	MAP_DRAM1_NS,
-	MAP_TSP_SEC_MEM,
+	ARM_MAP_NS_DRAM1,
+	ARM_MAP_TSP_SEC_MEM,
 	{0}
 };
 #endif
 #if IMAGE_BL31
-const mmap_region_t fvp_mmap[] = {
-	MAP_SHARED_RAM,
+const mmap_region_t plat_arm_mmap[] = {
+	ARM_MAP_SHARED_RAM,
+	V2M_MAP_IOFPGA,
 	MAP_DEVICE0,
 	MAP_DEVICE1,
 	{0}
 };
 #endif
 #if IMAGE_BL32
-const mmap_region_t fvp_mmap[] = {
+const mmap_region_t plat_arm_mmap[] = {
+	V2M_MAP_IOFPGA,
 	MAP_DEVICE0,
 	MAP_DEVICE1,
 	{0}
 };
 #endif
 
-CASSERT(ARRAY_SIZE(fvp_mmap) + FVP_BL_REGIONS \
-		<= MAX_MMAP_REGIONS, assert_max_mmap_regions);
+ARM_CASSERT_MMAP
 
+
+#if IMAGE_BL31 || IMAGE_BL32
 /* Array of secure interrupts to be configured by the gic driver */
 const unsigned int irq_sec_array[] = {
 	IRQ_TZ_WDOG,
-	IRQ_SEC_PHY_TIMER,
-	IRQ_SEC_SGI_0,
-	IRQ_SEC_SGI_1,
-	IRQ_SEC_SGI_2,
-	IRQ_SEC_SGI_3,
-	IRQ_SEC_SGI_4,
-	IRQ_SEC_SGI_5,
-	IRQ_SEC_SGI_6,
-	IRQ_SEC_SGI_7
+	ARM_IRQ_SEC_PHY_TIMER,
+	ARM_IRQ_SEC_SGI_0,
+	ARM_IRQ_SEC_SGI_1,
+	ARM_IRQ_SEC_SGI_2,
+	ARM_IRQ_SEC_SGI_3,
+	ARM_IRQ_SEC_SGI_4,
+	ARM_IRQ_SEC_SGI_5,
+	ARM_IRQ_SEC_SGI_6,
+	ARM_IRQ_SEC_SGI_7
 };
 
-/*******************************************************************************
- * Macro generating the code for the function setting up the pagetables as per
- * the platform memory map & initialize the mmu, for the given exception level
- ******************************************************************************/
-#if USE_COHERENT_MEM
-#define DEFINE_CONFIGURE_MMU_EL(_el)				\
-	void fvp_configure_mmu_el##_el(unsigned long total_base,	\
-				   unsigned long total_size,		\
-				   unsigned long ro_start,		\
-				   unsigned long ro_limit,		\
-				   unsigned long coh_start,		\
-				   unsigned long coh_limit)		\
-	{								\
-		mmap_add_region(total_base, total_base,			\
-				total_size,				\
-				MT_MEMORY | MT_RW | MT_SECURE);		\
-		mmap_add_region(ro_start, ro_start,			\
-				ro_limit - ro_start,			\
-				MT_MEMORY | MT_RO | MT_SECURE);		\
-		mmap_add_region(coh_start, coh_start,			\
-				coh_limit - coh_start,			\
-				MT_DEVICE | MT_RW | MT_SECURE);		\
-		mmap_add(fvp_mmap);					\
-		init_xlat_tables();					\
-									\
-		enable_mmu_el##_el(0);					\
-	}
-#else
-#define DEFINE_CONFIGURE_MMU_EL(_el)				\
-	void fvp_configure_mmu_el##_el(unsigned long total_base,	\
-				   unsigned long total_size,		\
-				   unsigned long ro_start,		\
-				   unsigned long ro_limit)		\
-	{								\
-		mmap_add_region(total_base, total_base,			\
-				total_size,				\
-				MT_MEMORY | MT_RW | MT_SECURE);		\
-		mmap_add_region(ro_start, ro_start,			\
-				ro_limit - ro_start,			\
-				MT_MEMORY | MT_RO | MT_SECURE);		\
-		mmap_add(fvp_mmap);					\
-		init_xlat_tables();					\
-									\
-		enable_mmu_el##_el(0);					\
-	}
-#endif
+void plat_arm_gic_init(void)
+{
+	arm_gic_init(arm_config.gicc_base,
+		arm_config.gicd_base,
+		BASE_GICR_BASE,
+		irq_sec_array,
+		ARRAY_SIZE(irq_sec_array));
+}
 
-/* Define EL1 and EL3 variants of the function initialising the MMU */
-DEFINE_CONFIGURE_MMU_EL(1)
-DEFINE_CONFIGURE_MMU_EL(3)
+#endif
 
 /*******************************************************************************
  * A single boot loader stack is expected to work on both the Foundation FVP
@@ -190,15 +136,15 @@
  * these platforms. This information is stored in a per-BL array to allow the
  * code to take the correct path.Per BL platform configuration.
  ******************************************************************************/
-int fvp_config_setup(void)
+void fvp_config_setup(void)
 {
 	unsigned int rev, hbi, bld, arch, sys_id;
 
-	sys_id = mmio_read_32(VE_SYSREGS_BASE + V2M_SYS_ID);
-	rev = (sys_id >> SYS_ID_REV_SHIFT) & SYS_ID_REV_MASK;
-	hbi = (sys_id >> SYS_ID_HBI_SHIFT) & SYS_ID_HBI_MASK;
-	bld = (sys_id >> SYS_ID_BLD_SHIFT) & SYS_ID_BLD_MASK;
-	arch = (sys_id >> SYS_ID_ARCH_SHIFT) & SYS_ID_ARCH_MASK;
+	sys_id = mmio_read_32(V2M_SYSREGS_BASE + V2M_SYS_ID);
+	rev = (sys_id >> V2M_SYS_ID_REV_SHIFT) & V2M_SYS_ID_REV_MASK;
+	hbi = (sys_id >> V2M_SYS_ID_HBI_SHIFT) & V2M_SYS_ID_HBI_MASK;
+	bld = (sys_id >> V2M_SYS_ID_BLD_SHIFT) & V2M_SYS_ID_BLD_MASK;
+	arch = (sys_id >> V2M_SYS_ID_ARCH_SHIFT) & V2M_SYS_ID_ARCH_MASK;
 
 	if (arch != ARCH_MODEL) {
 		ERROR("This firmware is for FVP models\n");
@@ -211,16 +157,16 @@
 	 */
 	switch (bld) {
 	case BLD_GIC_VE_MMAP:
-		plat_config.gicd_base = VE_GICD_BASE;
-		plat_config.gicc_base = VE_GICC_BASE;
-		plat_config.gich_base = VE_GICH_BASE;
-		plat_config.gicv_base = VE_GICV_BASE;
+		arm_config.gicd_base = VE_GICD_BASE;
+		arm_config.gicc_base = VE_GICC_BASE;
+		arm_config.gich_base = VE_GICH_BASE;
+		arm_config.gicv_base = VE_GICV_BASE;
 		break;
 	case BLD_GIC_A53A57_MMAP:
-		plat_config.gicd_base = BASE_GICD_BASE;
-		plat_config.gicc_base = BASE_GICC_BASE;
-		plat_config.gich_base = BASE_GICH_BASE;
-		plat_config.gicv_base = BASE_GICV_BASE;
+		arm_config.gicd_base = BASE_GICD_BASE;
+		arm_config.gicc_base = BASE_GICC_BASE;
+		arm_config.gich_base = BASE_GICH_BASE;
+		arm_config.gicv_base = BASE_GICV_BASE;
 		break;
 	default:
 		ERROR("Unsupported board build %x\n", bld);
@@ -232,36 +178,37 @@
 	 * for the Foundation FVP.
 	 */
 	switch (hbi) {
-	case HBI_FOUNDATION:
-		plat_config.max_aff0 = 4;
-		plat_config.max_aff1 = 1;
-		plat_config.flags = 0;
+	case HBI_FOUNDATION_FVP:
+		arm_config.max_aff0 = 4;
+		arm_config.max_aff1 = 1;
+		arm_config.flags = 0;
 
 		/*
 		 * Check for supported revisions of Foundation FVP
 		 * Allow future revisions to run but emit warning diagnostic
 		 */
 		switch (rev) {
-		case REV_FOUNDATION_V2_0:
-		case REV_FOUNDATION_V2_1:
+		case REV_FOUNDATION_FVP_V2_0:
+		case REV_FOUNDATION_FVP_V2_1:
+		case REV_FOUNDATION_FVP_v9_1:
 			break;
 		default:
 			WARN("Unrecognized Foundation FVP revision %x\n", rev);
 			break;
 		}
 		break;
-	case HBI_FVP_BASE:
-		plat_config.max_aff0 = 4;
-		plat_config.max_aff1 = 2;
-		plat_config.flags |= CONFIG_BASE_MMAP | CONFIG_HAS_CCI |
-			CONFIG_HAS_TZC;
+	case HBI_BASE_FVP:
+		arm_config.max_aff0 = 4;
+		arm_config.max_aff1 = 2;
+		arm_config.flags |= ARM_CONFIG_BASE_MMAP |
+			ARM_CONFIG_HAS_CCI | ARM_CONFIG_HAS_TZC;
 
 		/*
 		 * Check for supported revisions
 		 * Allow future revisions to run but emit warning diagnostic
 		 */
 		switch (rev) {
-		case REV_FVP_BASE_V0:
+		case REV_BASE_FVP_V0:
 			break;
 		default:
 			WARN("Unrecognized Base FVP revision %x\n", rev);
@@ -272,103 +219,26 @@
 		ERROR("Unsupported board HBI number 0x%x\n", hbi);
 		panic();
 	}
-
-	return 0;
 }
 
-unsigned long plat_get_ns_image_entrypoint(void)
-{
-	return NS_IMAGE_OFFSET;
-}
-
-uint64_t plat_get_syscnt_freq(void)
-{
-	uint64_t counter_base_frequency;
-
-	/* Read the frequency from Frequency modes table */
-	counter_base_frequency = mmio_read_32(SYS_CNTCTL_BASE + CNTFID_OFF);
-
-	/* The first entry of the frequency modes table must not be 0 */
-	if (counter_base_frequency == 0)
-		panic();
-
-	return counter_base_frequency;
-}
-
-/* Map of CCI masters with the slave interfaces they are connected */
-static const int cci_map[] = {
-	CCI400_CLUSTER0_SL_IFACE_IX,
-	CCI400_CLUSTER1_SL_IFACE_IX
-};
 
 void fvp_cci_init(void)
 {
 	/*
 	 * Initialize CCI-400 driver
 	 */
-	if (plat_config.flags & CONFIG_HAS_CCI)
-		cci_init(CCI400_BASE,
-			cci_map,
-			ARRAY_SIZE(cci_map));
+	if (arm_config.flags & ARM_CONFIG_HAS_CCI)
+		arm_cci_init();
 }
 
 void fvp_cci_enable(void)
 {
-	if (plat_config.flags & CONFIG_HAS_CCI)
+	if (arm_config.flags & ARM_CONFIG_HAS_CCI)
 		cci_enable_snoop_dvm_reqs(MPIDR_AFFLVL1_VAL(read_mpidr()));
 }
 
 void fvp_cci_disable(void)
 {
-	if (plat_config.flags & CONFIG_HAS_CCI)
+	if (arm_config.flags & ARM_CONFIG_HAS_CCI)
 		cci_disable_snoop_dvm_reqs(MPIDR_AFFLVL1_VAL(read_mpidr()));
 }
-
-void fvp_gic_init(void)
-{
-	arm_gic_init(plat_config.gicc_base,
-		plat_config.gicd_base,
-		BASE_GICR_BASE,
-		irq_sec_array,
-		ARRAY_SIZE(irq_sec_array));
-}
-
-
-/*******************************************************************************
- * Gets SPSR for BL32 entry
- ******************************************************************************/
-uint32_t fvp_get_spsr_for_bl32_entry(void)
-{
-	/*
-	 * The Secure Payload Dispatcher service is responsible for
-	 * setting the SPSR prior to entry into the BL32 image.
-	 */
-	return 0;
-}
-
-/*******************************************************************************
- * Gets SPSR for BL33 entry
- ******************************************************************************/
-uint32_t fvp_get_spsr_for_bl33_entry(void)
-{
-	unsigned long el_status;
-	unsigned int mode;
-	uint32_t spsr;
-
-	/* Figure out what mode we enter the non-secure world in */
-	el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
-	el_status &= ID_AA64PFR0_ELX_MASK;
-
-	if (el_status)
-		mode = MODE_EL2;
-	else
-		mode = MODE_EL1;
-
-	/*
-	 * TODO: Consider the possibility of specifying the SPSR in
-	 * the FIP ToC and allowing the platform to have a say as
-	 * well.
-	 */
-	spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
-	return spsr;
-}
diff --git a/plat/fvp/aarch64/fvp_helpers.S b/plat/fvp/aarch64/fvp_helpers.S
index c661ff3..dd56687 100644
--- a/plat/fvp/aarch64/fvp_helpers.S
+++ b/plat/fvp/aarch64/fvp_helpers.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -30,24 +30,21 @@
 
 #include <arch.h>
 #include <asm_macros.S>
-#include <bl_common.h>
 #include <gic_v2.h>
 #include <platform_def.h>
-#include <pl011.h>
+#include <v2m_def.h>
 #include "../drivers/pwrc/fvp_pwrc.h"
+#include "../fvp_def.h"
 
-	.globl	platform_get_entrypoint
 	.globl	plat_secondary_cold_boot_setup
+	.globl	platform_get_entrypoint
 	.globl	platform_mem_init
-	.globl	plat_report_exception
 	.globl	platform_is_primary_cpu
-	.globl	plat_crash_console_init
-	.globl	plat_crash_console_putc
 
 	.macro	fvp_choose_gicmmap  param1, param2, x_tmp, w_tmp, res
-	ldr	\x_tmp, =VE_SYSREGS_BASE + V2M_SYS_ID
+	ldr	\x_tmp, =V2M_SYSREGS_BASE + V2M_SYS_ID
 	ldr	\w_tmp, [\x_tmp]
-	ubfx	\w_tmp, \w_tmp, #SYS_ID_BLD_SHIFT, #SYS_ID_BLD_LENGTH
+	ubfx	\w_tmp, \w_tmp, #V2M_SYS_ID_BLD_SHIFT, #V2M_SYS_ID_BLD_LENGTH
 	cmp	\w_tmp, #BLD_GIC_VE_MMAP
 	csel	\res, \param1, \param2, eq
 	.endm
@@ -143,7 +140,7 @@
 	 */
 	ldr	x10, =MBOX_BASE
 	bl	platform_get_core_pos
-	lsl	x0, x0, #CACHE_WRITEBACK_SHIFT
+	lsl	x0, x0, #ARM_CACHE_WRITEBACK_SHIFT
 	ldr	x0, [x10, x0]
 	cbz	x0, _panic
 exit:
@@ -174,27 +171,6 @@
 	ret
 endfunc platform_mem_init
 
-	/* ---------------------------------------------
-	 * void plat_report_exception(unsigned int type)
-	 * Function to report an unhandled exception
-	 * with platform-specific means.
-	 * On FVP platform, it updates the LEDs
-	 * to indicate where we are
-	 * ---------------------------------------------
-	 */
-func plat_report_exception
-	mrs	x1, CurrentEl
-	lsr	x1, x1, #MODE_EL_SHIFT
-	lsl	x1, x1, #SYS_LED_EL_SHIFT
-	lsl	x0, x0, #SYS_LED_EC_SHIFT
-	mov	x2, #(SECURE << SYS_LED_SS_SHIFT)
-	orr	x0, x0, x2
-	orr	x0, x0, x1
-	mov	x1, #VE_SYSREGS_BASE
-	add	x1, x1, #V2M_SYS_LED
-	str	w0, [x1]
-	ret
-endfunc plat_report_exception
 
 func platform_is_primary_cpu
 	and	x0, x0, #(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK)
@@ -202,32 +178,3 @@
 	cset	x0, eq
 	ret
 endfunc platform_is_primary_cpu
-
-	/* Define a crash console for the plaform */
-#define FVP_CRASH_CONSOLE_BASE		PL011_UART1_BASE
-
-	/* ---------------------------------------------
-	 * int plat_crash_console_init(void)
-	 * Function to initialize the crash console
-	 * without a C Runtime to print crash report.
-	 * Clobber list : x0, x1, x2
-	 * ---------------------------------------------
-	 */
-func plat_crash_console_init
-	mov_imm	x0, FVP_CRASH_CONSOLE_BASE
-	mov_imm	x1, PL011_UART1_CLK_IN_HZ
-	mov_imm	x2, PL011_BAUDRATE
-	b	console_core_init
-endfunc plat_crash_console_init
-
-	/* ---------------------------------------------
-	 * int plat_crash_console_putc(int c)
-	 * Function to print a character on the crash
-	 * console without a C Runtime.
-	 * Clobber list : x1, x2
-	 * ---------------------------------------------
-	 */
-func plat_crash_console_putc
-	mov_imm	x1, FVP_CRASH_CONSOLE_BASE
-	b	console_core_putc
-endfunc plat_crash_console_putc
diff --git a/plat/fvp/bl1_fvp_setup.c b/plat/fvp/bl1_fvp_setup.c
index 4b421d7..33712d1 100644
--- a/plat/fvp/bl1_fvp_setup.c
+++ b/plat/fvp/bl1_fvp_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -28,114 +28,27 @@
  * POSSIBILITY OF SUCH DAMAGE.
  */
 
-#include <arch_helpers.h>
-#include <assert.h>
-#include <bl_common.h>
-#include <debug.h>
-#include <console.h>
-#include <mmio.h>
-#include <platform.h>
-#include <platform_def.h>
-#include "../../bl1/bl1_private.h"
-#include "fvp_def.h"
+#include <plat_arm.h>
 #include "fvp_private.h"
 
-#if USE_COHERENT_MEM
-/*******************************************************************************
- * Declarations of linker defined symbols which will help us find the layout
- * of trusted SRAM
- ******************************************************************************/
-extern unsigned long __COHERENT_RAM_START__;
-extern unsigned long __COHERENT_RAM_END__;
-
-/*
- * The next 2 constants identify the extents of the coherent memory region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to
- * page-aligned addresses.
- */
-#define BL1_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
-#define BL1_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
-#endif
-
-/* Data structure which holds the extents of the trusted SRAM for BL1*/
-static meminfo_t bl1_tzram_layout;
-
-meminfo_t *bl1_plat_sec_mem_layout(void)
-{
-	return &bl1_tzram_layout;
-}
 
 /*******************************************************************************
  * Perform any BL1 specific platform actions.
  ******************************************************************************/
 void bl1_early_platform_setup(void)
 {
-	const size_t bl1_size = BL1_RAM_LIMIT - BL1_RAM_BASE;
-
-	/* Initialize the console to provide early debug support */
-	console_init(PL011_UART0_BASE, PL011_UART0_CLK_IN_HZ, PL011_BAUDRATE);
-
-	/* Allow BL1 to see the whole Trusted RAM */
-	bl1_tzram_layout.total_base = FVP_TRUSTED_SRAM_BASE;
-	bl1_tzram_layout.total_size = FVP_TRUSTED_SRAM_SIZE;
-
-	/* Calculate how much RAM BL1 is using and how much remains free */
-	bl1_tzram_layout.free_base = FVP_TRUSTED_SRAM_BASE;
-	bl1_tzram_layout.free_size = FVP_TRUSTED_SRAM_SIZE;
-	reserve_mem(&bl1_tzram_layout.free_base,
-		    &bl1_tzram_layout.free_size,
-		    BL1_RAM_BASE,
-		    bl1_size);
+	arm_bl1_early_platform_setup();
 
 	/* Initialize the platform config for future decision making */
 	fvp_config_setup();
-}
 
-/*******************************************************************************
- * Function which will evaluate how much of the trusted ram has been gobbled
- * up by BL1 and return the base and size of whats available for loading BL2.
- * Its called after coherency and the MMU have been turned on.
- ******************************************************************************/
-void bl1_platform_setup(void)
-{
-	/* Initialise the IO layer and register platform IO devices */
-	fvp_io_setup();
-}
-
-
-/*******************************************************************************
- * Perform the very early platform specific architecture setup here. At the
- * moment this only does basic initialization. Later architectural setup
- * (bl1_arch_setup()) does not do anything platform specific.
- ******************************************************************************/
-void bl1_plat_arch_setup(void)
-{
+	/*
+	 * Initialize CCI for this cluster during cold boot.
+	 * No need for locks as no other CPU is active.
+	 */
 	fvp_cci_init();
+	/*
+	 * Enable CCI coherency for the primary CPU's cluster.
+	 */
 	fvp_cci_enable();
-
-	fvp_configure_mmu_el3(bl1_tzram_layout.total_base,
-			      bl1_tzram_layout.total_size,
-			      BL1_RO_BASE,
-			      BL1_RO_LIMIT
-#if USE_COHERENT_MEM
-			      , BL1_COHERENT_RAM_BASE,
-			      BL1_COHERENT_RAM_LIMIT
-#endif
-			     );
-}
-
-
-/*******************************************************************************
- * Before calling this function BL2 is loaded in memory and its entrypoint
- * is set by load_image. This is a placeholder for the platform to change
- * the entrypoint of BL2 and set SPSR and security state.
- * On FVP we are only setting the security state, entrypoint
- ******************************************************************************/
-void bl1_plat_set_bl2_ep_info(image_info_t *bl2_image,
-				entry_point_info_t *bl2_ep)
-{
-	SET_SECURITY_STATE(bl2_ep->h.attr, SECURE);
-	bl2_ep->spsr = SPSR_64(MODE_EL1, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
 }
diff --git a/plat/fvp/bl2_fvp_setup.c b/plat/fvp/bl2_fvp_setup.c
index 23c8593..a08f42c 100644
--- a/plat/fvp/bl2_fvp_setup.c
+++ b/plat/fvp/bl2_fvp_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -28,264 +28,14 @@
  * POSSIBILITY OF SUCH DAMAGE.
  */
 
-#include <arch_helpers.h>
-#include <assert.h>
-#include <bl_common.h>
-#include <console.h>
-#include <platform.h>
-#include <platform_def.h>
-#include <string.h>
-#include "fvp_def.h"
+#include <plat_arm.h>
 #include "fvp_private.h"
 
-/*******************************************************************************
- * Declarations of linker defined symbols which will help us find the layout
- * of trusted SRAM
- ******************************************************************************/
-extern unsigned long __RO_START__;
-extern unsigned long __RO_END__;
 
-#if USE_COHERENT_MEM
-extern unsigned long __COHERENT_RAM_START__;
-extern unsigned long __COHERENT_RAM_END__;
-#endif
-
-/*
- * The next 2 constants identify the extents of the code & RO data region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __RO_START__ and __RO_END__ linker symbols refer to page-aligned addresses.
- */
-#define BL2_RO_BASE (unsigned long)(&__RO_START__)
-#define BL2_RO_LIMIT (unsigned long)(&__RO_END__)
-
-#if USE_COHERENT_MEM
-/*
- * The next 2 constants identify the extents of the coherent memory region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to
- * page-aligned addresses.
- */
-#define BL2_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
-#define BL2_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
-#endif
-
-/* Data structure which holds the extents of the trusted SRAM for BL2 */
-static meminfo_t bl2_tzram_layout
-__attribute__ ((aligned(CACHE_WRITEBACK_GRANULE)));
-
-/* Assert that BL3-1 parameters fit in shared memory */
-CASSERT((PARAMS_BASE + sizeof(bl2_to_bl31_params_mem_t)) <
-	(FVP_SHARED_MEM_BASE + FVP_SHARED_MEM_SIZE),
-	assert_bl31_params_do_not_fit_in_shared_memory);
-
-/*******************************************************************************
- * Reference to structures which holds the arguments which need to be passed
- * to BL31
- ******************************************************************************/
-static bl31_params_t *bl2_to_bl31_params;
-static entry_point_info_t *bl31_ep_info;
-
-meminfo_t *bl2_plat_sec_mem_layout(void)
-{
-	return &bl2_tzram_layout;
-}
-
-/*******************************************************************************
- * This function assigns a pointer to the memory that the platform has kept
- * aside to pass platform specific and trusted firmware related information
- * to BL31. This memory is allocated by allocating memory to
- * bl2_to_bl31_params_mem_t structure which is a superset of all the
- * structure whose information is passed to BL31
- * NOTE: This function should be called only once and should be done
- * before generating params to BL31
- ******************************************************************************/
-bl31_params_t *bl2_plat_get_bl31_params(void)
-{
-	bl2_to_bl31_params_mem_t *bl31_params_mem;
-
-	/*
-	 * Allocate the memory for all the arguments that needs to
-	 * be passed to BL31
-	 */
-	bl31_params_mem = (bl2_to_bl31_params_mem_t *)PARAMS_BASE;
-	memset((void *)PARAMS_BASE, 0, sizeof(bl2_to_bl31_params_mem_t));
-
-	/* Assign memory for TF related information */
-	bl2_to_bl31_params = &bl31_params_mem->bl31_params;
-	SET_PARAM_HEAD(bl2_to_bl31_params, PARAM_BL31, VERSION_1, 0);
-
-	/* Fill BL31 related information */
-	bl31_ep_info = &bl31_params_mem->bl31_ep_info;
-	bl2_to_bl31_params->bl31_image_info = &bl31_params_mem->bl31_image_info;
-	SET_PARAM_HEAD(bl2_to_bl31_params->bl31_image_info, PARAM_IMAGE_BINARY,
-						VERSION_1, 0);
-
-	/* Fill BL32 related information if it exists */
-	if (BL32_BASE) {
-		bl2_to_bl31_params->bl32_ep_info =
-					&bl31_params_mem->bl32_ep_info;
-		SET_PARAM_HEAD(bl2_to_bl31_params->bl32_ep_info,
-					PARAM_EP, VERSION_1, 0);
-		bl2_to_bl31_params->bl32_image_info =
-					&bl31_params_mem->bl32_image_info;
-		SET_PARAM_HEAD(bl2_to_bl31_params->bl32_image_info,
-					PARAM_IMAGE_BINARY,
-					VERSION_1, 0);
-	}
-
-	/* Fill BL33 related information */
-	bl2_to_bl31_params->bl33_ep_info = &bl31_params_mem->bl33_ep_info;
-	SET_PARAM_HEAD(bl2_to_bl31_params->bl33_ep_info,
-					PARAM_EP, VERSION_1, 0);
-	bl2_to_bl31_params->bl33_image_info = &bl31_params_mem->bl33_image_info;
-	SET_PARAM_HEAD(bl2_to_bl31_params->bl33_image_info, PARAM_IMAGE_BINARY,
-					VERSION_1, 0);
-
-	return bl2_to_bl31_params;
-}
-
-
-/*******************************************************************************
- * This function returns a pointer to the shared memory that the platform
- * has kept to point to entry point information of BL31 to BL2
- ******************************************************************************/
-struct entry_point_info *bl2_plat_get_bl31_ep_info(void)
-{
-#if DEBUG
-	bl31_ep_info->args.arg1 = FVP_BL31_PLAT_PARAM_VAL;
-#endif
-	return bl31_ep_info;
-}
-
-
-/*******************************************************************************
- * BL1 has passed the extents of the trusted SRAM that should be visible to BL2
- * in x0. This memory layout is sitting at the base of the free trusted SRAM.
- * Copy it to a safe loaction before its reclaimed by later BL2 functionality.
- ******************************************************************************/
 void bl2_early_platform_setup(meminfo_t *mem_layout)
 {
-	/* Initialize the console to provide early debug support */
-	console_init(PL011_UART0_BASE, PL011_UART0_CLK_IN_HZ, PL011_BAUDRATE);
-
-	/* Setup the BL2 memory layout */
-	bl2_tzram_layout = *mem_layout;
+	arm_bl2_early_platform_setup(mem_layout);
 
 	/* Initialize the platform config for future decision making */
 	fvp_config_setup();
-
-	/* Initialise the IO layer and register platform IO devices */
-	fvp_io_setup();
-}
-
-/*******************************************************************************
- * Perform platform specific setup. For now just initialize the memory location
- * to use for passing arguments to BL31.
- ******************************************************************************/
-void bl2_platform_setup(void)
-{
-	/*
-	 * Do initial security configuration to allow DRAM/device access. On
-	 * Base FVP only DRAM security is programmable (via TrustZone), but
-	 * other platforms might have more programmable security devices
-	 * present.
-	 */
-	fvp_security_setup();
-}
-
-/* Flush the TF params and the TF plat params */
-void bl2_plat_flush_bl31_params(void)
-{
-	flush_dcache_range((unsigned long)PARAMS_BASE, \
-				sizeof(bl2_to_bl31_params_mem_t));
-}
-
-
-/*******************************************************************************
- * Perform the very early platform specific architectural setup here. At the
- * moment this is only intializes the mmu in a quick and dirty way.
- ******************************************************************************/
-void bl2_plat_arch_setup(void)
-{
-	fvp_configure_mmu_el1(bl2_tzram_layout.total_base,
-			      bl2_tzram_layout.total_size,
-			      BL2_RO_BASE,
-			      BL2_RO_LIMIT
-#if USE_COHERENT_MEM
-			      , BL2_COHERENT_RAM_BASE,
-			      BL2_COHERENT_RAM_LIMIT
-#endif
-			      );
-}
-
-/*******************************************************************************
- * Before calling this function BL31 is loaded in memory and its entrypoint
- * is set by load_image. This is a placeholder for the platform to change
- * the entrypoint of BL31 and set SPSR and security state.
- * On FVP we are only setting the security state, entrypoint
- ******************************************************************************/
-void bl2_plat_set_bl31_ep_info(image_info_t *bl31_image_info,
-					entry_point_info_t *bl31_ep_info)
-{
-	SET_SECURITY_STATE(bl31_ep_info->h.attr, SECURE);
-	bl31_ep_info->spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
-					DISABLE_ALL_EXCEPTIONS);
-}
-
-
-/*******************************************************************************
- * Before calling this function BL32 is loaded in memory and its entrypoint
- * is set by load_image. This is a placeholder for the platform to change
- * the entrypoint of BL32 and set SPSR and security state.
- * On FVP we are only setting the security state, entrypoint
- ******************************************************************************/
-void bl2_plat_set_bl32_ep_info(image_info_t *bl32_image_info,
-					entry_point_info_t *bl32_ep_info)
-{
-	SET_SECURITY_STATE(bl32_ep_info->h.attr, SECURE);
-	bl32_ep_info->spsr = fvp_get_spsr_for_bl32_entry();
-}
-
-/*******************************************************************************
- * Before calling this function BL33 is loaded in memory and its entrypoint
- * is set by load_image. This is a placeholder for the platform to change
- * the entrypoint of BL33 and set SPSR and security state.
- * On FVP we are only setting the security state, entrypoint
- ******************************************************************************/
-void bl2_plat_set_bl33_ep_info(image_info_t *image,
-					entry_point_info_t *bl33_ep_info)
-{
-	SET_SECURITY_STATE(bl33_ep_info->h.attr, NON_SECURE);
-	bl33_ep_info->spsr = fvp_get_spsr_for_bl33_entry();
-}
-
-
-/*******************************************************************************
- * Populate the extents of memory available for loading BL32
- ******************************************************************************/
-void bl2_plat_get_bl32_meminfo(meminfo_t *bl32_meminfo)
-{
-	/*
-	 * Populate the extents of memory available for loading BL32.
-	 */
-	bl32_meminfo->total_base = BL32_BASE;
-	bl32_meminfo->free_base = BL32_BASE;
-	bl32_meminfo->total_size =
-			(TSP_SEC_MEM_BASE + TSP_SEC_MEM_SIZE) - BL32_BASE;
-	bl32_meminfo->free_size =
-			(TSP_SEC_MEM_BASE + TSP_SEC_MEM_SIZE) - BL32_BASE;
-}
-
-
-/*******************************************************************************
- * Populate the extents of memory available for loading BL33
- ******************************************************************************/
-void bl2_plat_get_bl33_meminfo(meminfo_t *bl33_meminfo)
-{
-	bl33_meminfo->total_base = DRAM1_NS_BASE;
-	bl33_meminfo->total_size = DRAM1_NS_SIZE;
-	bl33_meminfo->free_base = DRAM1_NS_BASE;
-	bl33_meminfo->free_size = DRAM1_NS_SIZE;
 }
diff --git a/plat/fvp/bl31_fvp_setup.c b/plat/fvp/bl31_fvp_setup.c
index 3874413..b50ae55 100644
--- a/plat/fvp/bl31_fvp_setup.c
+++ b/plat/fvp/bl31_fvp_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -28,225 +28,30 @@
  * POSSIBILITY OF SUCH DAMAGE.
  */
 
-#include <arch.h>
-#include <arch_helpers.h>
-#include <arm_gic.h>
-#include <assert.h>
-#include <bl_common.h>
-#include <bl31.h>
-#include <console.h>
-#include <mmio.h>
-#include <platform.h>
-#include <stddef.h>
-#include "drivers/pwrc/fvp_pwrc.h"
-#include "fvp_def.h"
+#include <plat_arm.h>
 #include "fvp_private.h"
 
-/*******************************************************************************
- * Declarations of linker defined symbols which will help us find the layout
- * of trusted SRAM
- ******************************************************************************/
-extern unsigned long __RO_START__;
-extern unsigned long __RO_END__;
-extern unsigned long __BL31_END__;
 
-#if USE_COHERENT_MEM
-extern unsigned long __COHERENT_RAM_START__;
-extern unsigned long __COHERENT_RAM_END__;
-#endif
-
-/*
- * The next 3 constants identify the extents of the code, RO data region and the
- * limit of the BL3-1 image.  These addresses are used by the MMU setup code and
- * therefore they must be page-aligned.  It is the responsibility of the linker
- * script to ensure that __RO_START__, __RO_END__ & __BL31_END__ linker symbols
- * refer to page-aligned addresses.
- */
-#define BL31_RO_BASE (unsigned long)(&__RO_START__)
-#define BL31_RO_LIMIT (unsigned long)(&__RO_END__)
-#define BL31_END (unsigned long)(&__BL31_END__)
-
-#if USE_COHERENT_MEM
-/*
- * The next 2 constants identify the extents of the coherent memory region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols
- * refer to page-aligned addresses.
- */
-#define BL31_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
-#define BL31_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
-#endif
-
-#if RESET_TO_BL31
-static entry_point_info_t bl32_image_ep_info;
-static entry_point_info_t bl33_image_ep_info;
-#else
-/*******************************************************************************
- * Reference to structure which holds the arguments that have been passed to
- * BL31 from BL2.
- ******************************************************************************/
-static bl31_params_t *bl2_to_bl31_params;
-#endif
-
-/*******************************************************************************
- * Return a pointer to the 'entry_point_info' structure of the next image for the
- * security state specified. BL33 corresponds to the non-secure image type
- * while BL32 corresponds to the secure image type. A NULL pointer is returned
- * if the image does not exist.
- ******************************************************************************/
-entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
-{
-#if RESET_TO_BL31
-	assert(sec_state_is_valid(type));
-
-	if (type == NON_SECURE)
-		return &bl33_image_ep_info;
-	else
-		return &bl32_image_ep_info;
-#else
-	entry_point_info_t *next_image_info;
-
-	assert(sec_state_is_valid(type));
-
-	next_image_info = (type == NON_SECURE) ?
-		bl2_to_bl31_params->bl33_ep_info :
-		bl2_to_bl31_params->bl32_ep_info;
-
-	/* None of the images on this platform can have 0x0 as the entrypoint */
-	if (next_image_info->pc)
-		return next_image_info;
-	else
-		return NULL;
-#endif
-}
-
-/*******************************************************************************
- * Perform any BL31 specific platform actions. Here is an opportunity to copy
- * parameters passed by the calling EL (S-EL1 in BL2 & S-EL3 in BL1) before they
- * are lost (potentially). This needs to be done before the MMU is initialized
- * so that the memory layout can be used while creating page tables. On the FVP
- * we know that BL2 has populated the parameters in secure DRAM. So we just use
- * the reference passed in 'from_bl2' instead of copying. The 'data' parameter
- * is not used since all the information is contained in 'from_bl2'. Also, BL2
- * has flushed this information to memory, so we are guaranteed to pick up good
- * data
- ******************************************************************************/
 void bl31_early_platform_setup(bl31_params_t *from_bl2,
 				void *plat_params_from_bl2)
 {
-	/* Initialize the console to provide early debug support */
-	console_init(PL011_UART0_BASE, PL011_UART0_CLK_IN_HZ, PL011_BAUDRATE);
+	arm_bl31_early_platform_setup(from_bl2, plat_params_from_bl2);
 
 	/* Initialize the platform config for future decision making */
 	fvp_config_setup();
 
-#if RESET_TO_BL31
-	/* There are no parameters from BL2 if BL31 is a reset vector */
-	assert(from_bl2 == NULL);
-	assert(plat_params_from_bl2 == NULL);
-
 	/*
-	 * Do initial security configuration to allow DRAM/device access. On
-	 * Base FVP only DRAM security is programmable (via TrustZone), but
-	 * other platforms might have more programmable security devices
-	 * present.
+	 * Initialize CCI for this cluster during cold boot.
+	 * No need for locks as no other CPU is active.
 	 */
-	fvp_security_setup();
-
-	/* Populate entry point information for BL3-2 and BL3-3 */
-	SET_PARAM_HEAD(&bl32_image_ep_info,
-				PARAM_EP,
-				VERSION_1,
-				0);
-	SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE);
-	bl32_image_ep_info.pc = BL32_BASE;
-	bl32_image_ep_info.spsr = fvp_get_spsr_for_bl32_entry();
-
-	SET_PARAM_HEAD(&bl33_image_ep_info,
-				PARAM_EP,
-				VERSION_1,
-				0);
-	/*
-	 * Tell BL31 where the non-trusted software image
-	 * is located and the entry state information
-	 */
-	bl33_image_ep_info.pc = plat_get_ns_image_entrypoint();
-	bl33_image_ep_info.spsr = fvp_get_spsr_for_bl33_entry();
-	SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
-
-#else
-	/* Check params passed from BL2 should not be NULL,
-	 * We are not checking plat_params_from_bl2 as NULL as we are not
-	 * using it on FVP
-	 */
-	assert(from_bl2 != NULL);
-	assert(from_bl2->h.type == PARAM_BL31);
-	assert(from_bl2->h.version >= VERSION_1);
-
-	bl2_to_bl31_params = from_bl2;
-	assert(((unsigned long)plat_params_from_bl2) == FVP_BL31_PLAT_PARAM_VAL);
-#endif
-}
-
-/*******************************************************************************
- * Initialize the gic, configure the CLCD and zero out variables needed by the
- * secondaries to boot up correctly.
- ******************************************************************************/
-void bl31_platform_setup(void)
-{
-	unsigned int reg_val;
-
-	/* Initialize the gic cpu and distributor interfaces */
-	fvp_gic_init();
-	arm_gic_setup();
-
-	/*
-	 * TODO: Configure the CLCD before handing control to
-	 * linux. Need to see if a separate driver is needed
-	 * instead.
-	 */
-	mmio_write_32(VE_SYSREGS_BASE + V2M_SYS_CFGDATA, 0);
-	mmio_write_32(VE_SYSREGS_BASE + V2M_SYS_CFGCTRL,
-		      (1ull << 31) | (1 << 30) | (7 << 20) | (0 << 16));
-
-	/* Enable and initialize the System level generic timer */
-	mmio_write_32(SYS_CNTCTL_BASE + CNTCR_OFF, CNTCR_FCREQ(0) | CNTCR_EN);
-
-	/* Allow access to the System counter timer module */
-	reg_val = (1 << CNTACR_RPCT_SHIFT) | (1 << CNTACR_RVCT_SHIFT);
-	reg_val |= (1 << CNTACR_RFRQ_SHIFT) | (1 << CNTACR_RVOFF_SHIFT);
-	reg_val |= (1 << CNTACR_RWVT_SHIFT) | (1 << CNTACR_RWPT_SHIFT);
-	mmio_write_32(SYS_TIMCTL_BASE + CNTACR_BASE(0), reg_val);
-	mmio_write_32(SYS_TIMCTL_BASE + CNTACR_BASE(1), reg_val);
-
-	reg_val = (1 << CNTNSAR_NS_SHIFT(0)) | (1 << CNTNSAR_NS_SHIFT(1));
-	mmio_write_32(SYS_TIMCTL_BASE + CNTNSAR, reg_val);
-
-	/* Intialize the power controller */
-	fvp_pwrc_setup();
-
-	/* Topologies are best known to the platform. */
-	fvp_setup_topology();
-}
-
-/*******************************************************************************
- * Perform the very early platform specific architectural setup here. At the
- * moment this is only intializes the mmu in a quick and dirty way.
- ******************************************************************************/
-void bl31_plat_arch_setup(void)
-{
 	fvp_cci_init();
 #if RESET_TO_BL31
+	/*
+	 * Enable CCI coherency for the primary CPU's cluster
+	 * (if earlier BL has not already done so).
+	 * FVP PSCI code will enable coherency for other clusters.
+	 */
 	fvp_cci_enable();
-#endif
-	fvp_configure_mmu_el3(BL31_RO_BASE,
-			      (BL31_END - BL31_RO_BASE),
-			      BL31_RO_BASE,
-			      BL31_RO_LIMIT
-#if USE_COHERENT_MEM
-			      , BL31_COHERENT_RAM_BASE,
-			      BL31_COHERENT_RAM_LIMIT
-#endif
-			      );
+
+#endif /* RESET_TO_BL31 */
 }
diff --git a/plat/fvp/drivers/pwrc/fvp_pwrc.c b/plat/fvp/drivers/pwrc/fvp_pwrc.c
index 0497c2b..e004281 100644
--- a/plat/fvp/drivers/pwrc/fvp_pwrc.c
+++ b/plat/fvp/drivers/pwrc/fvp_pwrc.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -30,6 +30,7 @@
 
 #include <bakery_lock.h>
 #include <mmio.h>
+#include <plat_arm.h>
 #include "../../fvp_def.h"
 #include "../../fvp_private.h"
 #include "fvp_pwrc.h"
@@ -38,12 +39,7 @@
  * TODO: Someday there will be a generic power controller api. At the moment
  * each platform has its own pwrc so just exporting functions is fine.
  */
-#if USE_COHERENT_MEM
-static bakery_lock_t pwrc_lock __attribute__ ((section("tzfw_coherent_mem")));
-#define LOCK_ARG	&pwrc_lock
-#else
-#define LOCK_ARG	FVP_PWRC_BAKERY_ID
-#endif
+ARM_INSTANTIATE_LOCK
 
 unsigned int fvp_pwrc_get_cpu_wkr(unsigned long mpidr)
 {
@@ -53,56 +49,54 @@
 unsigned int fvp_pwrc_read_psysr(unsigned long mpidr)
 {
 	unsigned int rc;
-	fvp_lock_get(LOCK_ARG);
+	arm_lock_get();
 	mmio_write_32(PWRC_BASE + PSYSR_OFF, (unsigned int) mpidr);
 	rc = mmio_read_32(PWRC_BASE + PSYSR_OFF);
-	fvp_lock_release(LOCK_ARG);
+	arm_lock_release();
 	return rc;
 }
 
 void fvp_pwrc_write_pponr(unsigned long mpidr)
 {
-	fvp_lock_get(LOCK_ARG);
+	arm_lock_get();
 	mmio_write_32(PWRC_BASE + PPONR_OFF, (unsigned int) mpidr);
-	fvp_lock_release(LOCK_ARG);
+	arm_lock_release();
 }
 
 void fvp_pwrc_write_ppoffr(unsigned long mpidr)
 {
-	fvp_lock_get(LOCK_ARG);
+	arm_lock_get();
 	mmio_write_32(PWRC_BASE + PPOFFR_OFF, (unsigned int) mpidr);
-	fvp_lock_release(LOCK_ARG);
+	arm_lock_release();
 }
 
 void fvp_pwrc_set_wen(unsigned long mpidr)
 {
-	fvp_lock_get(LOCK_ARG);
+	arm_lock_get();
 	mmio_write_32(PWRC_BASE + PWKUPR_OFF,
 		      (unsigned int) (PWKUPR_WEN | mpidr));
-	fvp_lock_release(LOCK_ARG);
+	arm_lock_release();
 }
 
 void fvp_pwrc_clr_wen(unsigned long mpidr)
 {
-	fvp_lock_get(LOCK_ARG);
+	arm_lock_get();
 	mmio_write_32(PWRC_BASE + PWKUPR_OFF,
 		      (unsigned int) mpidr);
-	fvp_lock_release(LOCK_ARG);
+	arm_lock_release();
 }
 
 void fvp_pwrc_write_pcoffr(unsigned long mpidr)
 {
-	fvp_lock_get(LOCK_ARG);
+	arm_lock_get();
 	mmio_write_32(PWRC_BASE + PCOFFR_OFF, (unsigned int) mpidr);
-	fvp_lock_release(LOCK_ARG);
+	arm_lock_release();
 }
 
 /* Nothing else to do here apart from initializing the lock */
-int fvp_pwrc_setup(void)
+void plat_arm_pwrc_setup(void)
 {
-	fvp_lock_init(LOCK_ARG);
-
-	return 0;
+	arm_lock_init();
 }
 
 
diff --git a/plat/fvp/drivers/pwrc/fvp_pwrc.h b/plat/fvp/drivers/pwrc/fvp_pwrc.h
index ad1ea85..5b755af 100644
--- a/plat/fvp/drivers/pwrc/fvp_pwrc.h
+++ b/plat/fvp/drivers/pwrc/fvp_pwrc.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -63,7 +63,6 @@
 /*******************************************************************************
  * Function & variable prototypes
  ******************************************************************************/
-int fvp_pwrc_setup(void);
 void fvp_pwrc_write_pcoffr(unsigned long);
 void fvp_pwrc_write_ppoffr(unsigned long);
 void fvp_pwrc_write_pponr(unsigned long);
diff --git a/plat/fvp/fvp_def.h b/plat/fvp/fvp_def.h
index a2f2da8..47723c7 100644
--- a/plat/fvp/fvp_def.h
+++ b/plat/fvp/fvp_def.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2014, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2014-2015, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -31,215 +31,60 @@
 #ifndef __FVP_DEF_H__
 #define __FVP_DEF_H__
 
-/* Firmware Image Package */
-#define FIP_IMAGE_NAME			"fip.bin"
+#include <arm_def.h>
+
+
+#define FVP_MAX_CPUS_PER_CLUSTER	4
+
 #define FVP_PRIMARY_CPU			0x0
 
-/* Memory location options for TSP */
-#define FVP_TRUSTED_SRAM_ID		0
-#define FVP_TRUSTED_DRAM_ID		1
-#define FVP_DRAM_ID			2
-
-/*
- * Some of the definitions in this file use the 'ull' suffix in order to avoid
- * subtle integer overflow errors due to implicit integer type promotion when
- * working with 32-bit values.
- *
- * The TSP linker script includes some of these definitions to define the BL3-2
- * memory map, but the GNU LD does not support the 'ull' suffix, causing the
- * build process to fail. To solve this problem, the auxiliary macro MAKE_ULL(x)
- * will add the 'ull' suffix only when the macro __LINKER__  is not defined
- * (__LINKER__ is defined in the command line to preprocess the linker script).
- * Constants in the linker script will not have the 'ull' suffix, but this is
- * not a problem since the linker evaluates all constant expressions to 64 bit
- * (assuming the target architecture is 64 bit).
- */
-#ifndef __LINKER__
-  #define MAKE_ULL(x)			x##ull
-#else
-  #define MAKE_ULL(x)			x
-#endif
-
 /*******************************************************************************
  * FVP memory map related constants
  ******************************************************************************/
 
-#define FVP_TRUSTED_ROM_BASE	0x00000000
-#define FVP_TRUSTED_ROM_SIZE	0x04000000	/* 64 MB */
+#define FLASH1_BASE			0x0c000000
+#define FLASH1_SIZE			0x04000000
 
-/* The first 4KB of Trusted SRAM are used as shared memory */
-#define FVP_SHARED_MEM_BASE	0x04000000
-#define FVP_SHARED_MEM_SIZE	0x00001000	/* 4 KB */
+#define PSRAM_BASE			0x14000000
+#define PSRAM_SIZE			0x04000000
 
-/* The remaining Trusted SRAM is used to load the BL images */
-#define FVP_TRUSTED_SRAM_BASE	0x04001000
-#define FVP_TRUSTED_SRAM_SIZE	0x0003F000	/* 252 KB */
-
-#define FVP_TRUSTED_DRAM_BASE	0x06000000
-#define FVP_TRUSTED_DRAM_SIZE	0x02000000	/* 32 MB */
-
-#define FLASH0_BASE		0x08000000
-#define FLASH0_SIZE		0x04000000
-
-#define FLASH1_BASE		0x0c000000
-#define FLASH1_SIZE		0x04000000
-
-#define PSRAM_BASE		0x14000000
-#define PSRAM_SIZE		0x04000000
-
-#define VRAM_BASE		0x18000000
-#define VRAM_SIZE		0x02000000
+#define VRAM_BASE			0x18000000
+#define VRAM_SIZE			0x02000000
 
 /* Aggregate of all devices in the first GB */
-#define DEVICE0_BASE		0x1a000000
-#define DEVICE0_SIZE		0x12200000
+#define DEVICE0_BASE			0x20000000
+#define DEVICE0_SIZE			0x0c200000
 
-#define DEVICE1_BASE		0x2f000000
-#define DEVICE1_SIZE		0x200000
+#define DEVICE1_BASE			0x2f000000
+#define DEVICE1_SIZE			0x200000
 
-#define NSRAM_BASE		0x2e000000
-#define NSRAM_SIZE		0x10000
+#define NSRAM_BASE			0x2e000000
+#define NSRAM_SIZE			0x10000
 
-#define DRAM1_BASE		MAKE_ULL(0x80000000)
-#define DRAM1_SIZE		MAKE_ULL(0x80000000)
-#define DRAM1_END		(DRAM1_BASE + DRAM1_SIZE - 1)
+#define PCIE_EXP_BASE			0x40000000
+#define TZRNG_BASE			0x7fe60000
+#define TZNVCTR_BASE			0x7fe70000
+#define TZROOTKEY_BASE			0x7fe80000
 
-/* Define the top 16 MB of DRAM1 as secure */
-#define DRAM1_SEC_SIZE		MAKE_ULL(0x01000000)
-#define DRAM1_SEC_BASE		(DRAM1_BASE + DRAM1_SIZE - DRAM1_SEC_SIZE)
-#define DRAM1_SEC_END		(DRAM1_SEC_BASE + DRAM1_SEC_SIZE - 1)
+/* Constants to distinguish FVP type */
+#define HBI_BASE_FVP			0x020
+#define REV_BASE_FVP_V0			0x0
 
-#define DRAM1_NS_BASE		DRAM1_BASE
-#define DRAM1_NS_SIZE		(DRAM1_SIZE - DRAM1_SEC_SIZE)
-#define DRAM1_NS_END		(DRAM1_NS_BASE + DRAM1_NS_SIZE - 1)
+#define HBI_FOUNDATION_FVP		0x010
+#define REV_FOUNDATION_FVP_V2_0		0x0
+#define REV_FOUNDATION_FVP_V2_1		0x1
+#define REV_FOUNDATION_FVP_v9_1		0x2
 
-#define DRAM_BASE		DRAM1_BASE
-#define DRAM_SIZE		DRAM1_SIZE
+#define BLD_GIC_VE_MMAP			0x0
+#define BLD_GIC_A53A57_MMAP		0x1
 
-#define DRAM2_BASE		MAKE_ULL(0x880000000)
-#define DRAM2_SIZE		MAKE_ULL(0x780000000)
-#define DRAM2_END		(DRAM2_BASE + DRAM2_SIZE - 1)
-
-#define PCIE_EXP_BASE		0x40000000
-#define TZRNG_BASE		0x7fe60000
-#define TZNVCTR_BASE		0x7fe70000
-#define TZROOTKEY_BASE		0x7fe80000
-
-/* Memory mapped Generic timer interfaces  */
-#define SYS_CNTCTL_BASE		0x2a430000
-#define SYS_CNTREAD_BASE	0x2a800000
-#define SYS_TIMCTL_BASE		0x2a810000
-
-/* V2M motherboard system registers & offsets */
-#define VE_SYSREGS_BASE		0x1c010000
-#define V2M_SYS_ID		0x0
-#define V2M_SYS_SWITCH		0x4
-#define V2M_SYS_LED		0x8
-#define V2M_SYS_CFGDATA		0xa0
-#define V2M_SYS_CFGCTRL		0xa4
-#define V2M_SYS_CFGSTATUS	0xa8
-
-#define CFGCTRL_START		(1 << 31)
-#define CFGCTRL_RW		(1 << 30)
-#define CFGCTRL_FUNC_SHIFT	20
-#define CFGCTRL_FUNC(fn)	(fn << CFGCTRL_FUNC_SHIFT)
-#define FUNC_CLK_GEN		0x01
-#define FUNC_TEMP		0x04
-#define FUNC_DB_RESET		0x05
-#define FUNC_SCC_CFG		0x06
-#define FUNC_SHUTDOWN		0x08
-#define FUNC_REBOOT		0x09
-
-/*
- * The number of regions like RO(code), coherent and data required by
- * different BL stages which need to be mapped in the MMU.
- */
-#if USE_COHERENT_MEM
-#define FVP_BL_REGIONS		3
-#else
-#define FVP_BL_REGIONS		2
-#endif
-
-/*
- * The FVP_MAX_MMAP_REGIONS depend on the number of entries in fvp_mmap[]
- * defined for each BL stage in fvp_common.c.
- */
-#if IMAGE_BL1
-#define FVP_MMAP_ENTRIES		5
-#endif
-#if IMAGE_BL2
-#define FVP_MMAP_ENTRIES		7
-#endif
-#if IMAGE_BL31
-#define FVP_MMAP_ENTRIES		4
-#endif
-#if IMAGE_BL32
-#define FVP_MMAP_ENTRIES		3
-#endif
-
-/* Load address of BL33 in the FVP port */
-#define NS_IMAGE_OFFSET		(DRAM1_BASE + 0x8000000) /* DRAM + 128MB */
-
-/* Special value used to verify platform parameters from BL2 to BL3-1 */
-#define FVP_BL31_PLAT_PARAM_VAL	0x0f1e2d3c4b5a6978ULL
-
-/*
- * V2M sysled bit definitions. The values written to this
- * register are defined in arch.h & runtime_svc.h. Only
- * used by the primary cpu to diagnose any cold boot issues.
- *
- * SYS_LED[0]   - Security state (S=0/NS=1)
- * SYS_LED[2:1] - Exception Level (EL3-EL0)
- * SYS_LED[7:3] - Exception Class (Sync/Async & origin)
- *
- */
-#define SYS_LED_SS_SHIFT		0x0
-#define SYS_LED_EL_SHIFT		0x1
-#define SYS_LED_EC_SHIFT		0x3
-
-#define SYS_LED_SS_MASK		0x1
-#define SYS_LED_EL_MASK		0x3
-#define SYS_LED_EC_MASK		0x1f
-
-/* V2M sysid register bits */
-#define SYS_ID_REV_SHIFT	28
-#define SYS_ID_HBI_SHIFT	16
-#define SYS_ID_BLD_SHIFT	12
-#define SYS_ID_ARCH_SHIFT	8
-#define SYS_ID_FPGA_SHIFT	0
-
-#define SYS_ID_REV_MASK	0xf
-#define SYS_ID_HBI_MASK	0xfff
-#define SYS_ID_BLD_MASK	0xf
-#define SYS_ID_ARCH_MASK	0xf
-#define SYS_ID_FPGA_MASK	0xff
-
-#define SYS_ID_BLD_LENGTH	4
-
-#define HBI_FVP_BASE		0x020
-#define REV_FVP_BASE_V0		0x0
-
-#define HBI_FOUNDATION		0x010
-#define REV_FOUNDATION_V2_0	0x0
-#define REV_FOUNDATION_V2_1	0x1
-
-#define BLD_GIC_VE_MMAP	0x0
-#define BLD_GIC_A53A57_MMAP	0x1
-
-#define ARCH_MODEL		0x1
+#define ARCH_MODEL			0x1
 
 /* FVP Power controller base address*/
-#define PWRC_BASE		0x1c100000
+#define PWRC_BASE			0x1c100000
 
 
 /*******************************************************************************
- * CCI-400 related constants
- ******************************************************************************/
-#define CCI400_BASE			0x2c090000
-#define CCI400_CLUSTER0_SL_IFACE_IX	3
-#define CCI400_CLUSTER1_SL_IFACE_IX	4
-
-/*******************************************************************************
  * GIC-400 & interrupt handling related constants
  ******************************************************************************/
 /* VE compatible GIC memory map */
@@ -256,39 +101,11 @@
 #define BASE_GICV_BASE			0x2c02f000
 
 #define IRQ_TZ_WDOG			56
-#define IRQ_SEC_PHY_TIMER		29
-#define IRQ_SEC_SGI_0			8
-#define IRQ_SEC_SGI_1			9
-#define IRQ_SEC_SGI_2			10
-#define IRQ_SEC_SGI_3			11
-#define IRQ_SEC_SGI_4			12
-#define IRQ_SEC_SGI_5			13
-#define IRQ_SEC_SGI_6			14
-#define IRQ_SEC_SGI_7			15
 
-/*******************************************************************************
- * PL011 related constants
- ******************************************************************************/
-#define PL011_UART0_BASE		0x1c090000
-#define PL011_UART1_BASE		0x1c0a0000
-#define PL011_UART2_BASE		0x1c0b0000
-#define PL011_UART3_BASE		0x1c0c0000
-
-#define PL011_BAUDRATE  115200
-
-#define PL011_UART0_CLK_IN_HZ 24000000
-#define PL011_UART1_CLK_IN_HZ 24000000
-#define PL011_UART2_CLK_IN_HZ 24000000
-#define PL011_UART3_CLK_IN_HZ 24000000
 
 /*******************************************************************************
  * TrustZone address space controller related constants
  ******************************************************************************/
-#define TZC400_BASE			0x2a4a0000
-
-/*
- * The NSAIDs for this platform as used to program the TZC400.
- */
 
 /* NSAIDs used by devices in TZC filter 0 on FVP */
 #define FVP_NSAID_DEFAULT		0
@@ -306,10 +123,8 @@
  ******************************************************************************/
 
 /* Entrypoint mailboxes */
-#define MBOX_BASE		FVP_SHARED_MEM_BASE
-#define MBOX_SIZE		0x200
+#define MBOX_BASE			ARM_SHARED_RAM_BASE
+#define MBOX_SIZE			0x200
 
-/* Base address where parameters to BL31 are stored */
-#define PARAMS_BASE		(MBOX_BASE + MBOX_SIZE)
 
 #endif /* __FVP_DEF_H__ */
diff --git a/plat/fvp/fvp_io_storage.c b/plat/fvp/fvp_io_storage.c
index ec1fe58..0284c3d 100644
--- a/plat/fvp/fvp_io_storage.c
+++ b/plat/fvp/fvp_io_storage.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2014, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2014-2015, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -31,227 +31,13 @@
 #include <assert.h>
 #include <debug.h>
 #include <io_driver.h>
-#include <io_fip.h>
-#include <io_memmap.h>
 #include <io_storage.h>
 #include <io_semihosting.h>
-#include <platform_def.h>
-#include <semihosting.h>	/* For FOPEN_MODE_... */
-#include <string.h>
+#include <plat_arm.h>
 
 /* IO devices */
 static const io_dev_connector_t *sh_dev_con;
-static uintptr_t sh_dev_spec;
-static uintptr_t sh_init_params;
 static uintptr_t sh_dev_handle;
-static const io_dev_connector_t *fip_dev_con;
-static uintptr_t fip_dev_spec;
-static uintptr_t fip_dev_handle;
-static const io_dev_connector_t *memmap_dev_con;
-static uintptr_t memmap_dev_spec;
-static uintptr_t memmap_init_params;
-static uintptr_t memmap_dev_handle;
-
-static const io_block_spec_t fip_block_spec = {
-	.offset = FLASH0_BASE,
-	.length = FLASH0_SIZE
-};
-
-static const io_file_spec_t bl2_file_spec = {
-	.path = BL2_IMAGE_NAME,
-	.mode = FOPEN_MODE_RB
-};
-
-static const io_file_spec_t bl31_file_spec = {
-	.path = BL31_IMAGE_NAME,
-	.mode = FOPEN_MODE_RB
-};
-
-static const io_file_spec_t bl32_file_spec = {
-	.path = BL32_IMAGE_NAME,
-	.mode = FOPEN_MODE_RB
-};
-
-static const io_file_spec_t bl33_file_spec = {
-	.path = BL33_IMAGE_NAME,
-	.mode = FOPEN_MODE_RB
-};
-
-#if TRUSTED_BOARD_BOOT
-static const io_file_spec_t bl2_cert_file_spec = {
-	.path = BL2_CERT_NAME,
-	.mode = FOPEN_MODE_RB
-};
-
-static const io_file_spec_t trusted_key_cert_file_spec = {
-	.path = TRUSTED_KEY_CERT_NAME,
-	.mode = FOPEN_MODE_RB
-};
-
-static const io_file_spec_t bl30_key_cert_file_spec = {
-	.path = BL30_KEY_CERT_NAME,
-	.mode = FOPEN_MODE_RB
-};
-
-static const io_file_spec_t bl31_key_cert_file_spec = {
-	.path = BL31_KEY_CERT_NAME,
-	.mode = FOPEN_MODE_RB
-};
-
-static const io_file_spec_t bl32_key_cert_file_spec = {
-	.path = BL32_KEY_CERT_NAME,
-	.mode = FOPEN_MODE_RB
-};
-
-static const io_file_spec_t bl33_key_cert_file_spec = {
-	.path = BL33_KEY_CERT_NAME,
-	.mode = FOPEN_MODE_RB
-};
-
-static const io_file_spec_t bl30_cert_file_spec = {
-	.path = BL30_CERT_NAME,
-	.mode = FOPEN_MODE_RB
-};
-
-static const io_file_spec_t bl31_cert_file_spec = {
-	.path = BL31_CERT_NAME,
-	.mode = FOPEN_MODE_RB
-};
-
-static const io_file_spec_t bl32_cert_file_spec = {
-	.path = BL32_CERT_NAME,
-	.mode = FOPEN_MODE_RB
-};
-
-static const io_file_spec_t bl33_cert_file_spec = {
-	.path = BL33_CERT_NAME,
-	.mode = FOPEN_MODE_RB
-};
-#endif /* TRUSTED_BOARD_BOOT */
-
-static int open_fip(const uintptr_t spec);
-static int open_memmap(const uintptr_t spec);
-
-struct plat_io_policy {
-	char *image_name;
-	uintptr_t *dev_handle;
-	uintptr_t image_spec;
-	int (*check)(const uintptr_t spec);
-};
-
-static const struct plat_io_policy policies[] = {
-	{
-		FIP_IMAGE_NAME,
-		&memmap_dev_handle,
-		(uintptr_t)&fip_block_spec,
-		open_memmap
-	}, {
-		BL2_IMAGE_NAME,
-		&fip_dev_handle,
-		(uintptr_t)&bl2_file_spec,
-		open_fip
-	}, {
-		BL31_IMAGE_NAME,
-		&fip_dev_handle,
-		(uintptr_t)&bl31_file_spec,
-		open_fip
-	}, {
-		BL32_IMAGE_NAME,
-		&fip_dev_handle,
-		(uintptr_t)&bl32_file_spec,
-		open_fip
-	}, {
-		BL33_IMAGE_NAME,
-		&fip_dev_handle,
-		(uintptr_t)&bl33_file_spec,
-		open_fip
-	}, {
-#if TRUSTED_BOARD_BOOT
-		BL2_CERT_NAME,
-		&fip_dev_handle,
-		(uintptr_t)&bl2_cert_file_spec,
-		open_fip
-	}, {
-		TRUSTED_KEY_CERT_NAME,
-		&fip_dev_handle,
-		(uintptr_t)&trusted_key_cert_file_spec,
-		open_fip
-	}, {
-		BL30_KEY_CERT_NAME,
-		&fip_dev_handle,
-		(uintptr_t)&bl30_key_cert_file_spec,
-		open_fip
-	}, {
-		BL31_KEY_CERT_NAME,
-		&fip_dev_handle,
-		(uintptr_t)&bl31_key_cert_file_spec,
-		open_fip
-	}, {
-		BL32_KEY_CERT_NAME,
-		&fip_dev_handle,
-		(uintptr_t)&bl32_key_cert_file_spec,
-		open_fip
-	}, {
-		BL33_KEY_CERT_NAME,
-		&fip_dev_handle,
-		(uintptr_t)&bl33_key_cert_file_spec,
-		open_fip
-	}, {
-		BL30_CERT_NAME,
-		&fip_dev_handle,
-		(uintptr_t)&bl30_cert_file_spec,
-		open_fip
-	}, {
-		BL31_CERT_NAME,
-		&fip_dev_handle,
-		(uintptr_t)&bl31_cert_file_spec,
-		open_fip
-	}, {
-		BL32_CERT_NAME,
-		&fip_dev_handle,
-		(uintptr_t)&bl32_cert_file_spec,
-		open_fip
-	}, {
-		BL33_CERT_NAME,
-		&fip_dev_handle,
-		(uintptr_t)&bl33_cert_file_spec,
-		open_fip
-	}, {
-#endif /* TRUSTED_BOARD_BOOT */
-		0, 0, 0
-	}
-};
-
-
-static int open_fip(const uintptr_t spec)
-{
-	int result = IO_FAIL;
-
-	/* See if a Firmware Image Package is available */
-	result = io_dev_init(fip_dev_handle, (uintptr_t)FIP_IMAGE_NAME);
-	if (result == IO_SUCCESS) {
-		VERBOSE("Using FIP\n");
-		/*TODO: Check image defined in spec is present in FIP. */
-	}
-	return result;
-}
-
-
-static int open_memmap(const uintptr_t spec)
-{
-	int result = IO_FAIL;
-	uintptr_t local_image_handle;
-
-	result = io_dev_init(memmap_dev_handle, memmap_init_params);
-	if (result == IO_SUCCESS) {
-		result = io_open(memmap_dev_handle, spec, &local_image_handle);
-		if (result == IO_SUCCESS) {
-			VERBOSE("Using Memmap IO\n");
-			io_close(local_image_handle);
-		}
-	}
-	return result;
-}
 
 
 static int open_semihosting(const uintptr_t spec)
@@ -260,7 +46,7 @@
 	uintptr_t local_image_handle;
 
 	/* See if the file exists on semi-hosting.*/
-	result = io_dev_init(sh_dev_handle, sh_init_params);
+	result = io_dev_init(sh_dev_handle, (uintptr_t)NULL);
 	if (result == IO_SUCCESS) {
 		result = io_open(sh_dev_handle, spec, &local_image_handle);
 		if (result == IO_SUCCESS) {
@@ -271,68 +57,31 @@
 	return result;
 }
 
-void fvp_io_setup (void)
+void plat_arm_io_setup(void)
 {
-	int io_result = IO_FAIL;
+	int io_result;
 
-	/* Register the IO devices on this platform */
+	arm_io_setup();
+
+	/* Register the additional IO devices on this platform */
 	io_result = register_io_dev_sh(&sh_dev_con);
 	assert(io_result == IO_SUCCESS);
 
-	io_result = register_io_dev_fip(&fip_dev_con);
-	assert(io_result == IO_SUCCESS);
-
-	io_result = register_io_dev_memmap(&memmap_dev_con);
-	assert(io_result == IO_SUCCESS);
-
 	/* Open connections to devices and cache the handles */
-	io_result = io_dev_open(sh_dev_con, sh_dev_spec, &sh_dev_handle);
-	assert(io_result == IO_SUCCESS);
-
-	io_result = io_dev_open(fip_dev_con, fip_dev_spec, &fip_dev_handle);
-	assert(io_result == IO_SUCCESS);
-
-	io_result = io_dev_open(memmap_dev_con, memmap_dev_spec,
-				&memmap_dev_handle);
+	io_result = io_dev_open(sh_dev_con, (uintptr_t)NULL, &sh_dev_handle);
 	assert(io_result == IO_SUCCESS);
 
 	/* Ignore improbable errors in release builds */
 	(void)io_result;
 }
 
-
-/* Return an IO device handle and specification which can be used to access
- * an image. Use this to enforce platform load policy */
-int plat_get_image_source(const char *image_name, uintptr_t *dev_handle,
-			  uintptr_t *image_spec)
+int plat_arm_get_alt_image_source(
+	const uintptr_t image_spec,
+	uintptr_t *dev_handle)
 {
-	int result = IO_FAIL;
-	const struct plat_io_policy *policy;
+	int result = open_semihosting(image_spec);
+	if (result == IO_SUCCESS)
+		*dev_handle = sh_dev_handle;
 
-	if ((image_name != NULL) && (dev_handle != NULL) &&
-	    (image_spec != NULL)) {
-		policy = policies;
-		while (policy->image_name != NULL) {
-			if (strcmp(policy->image_name, image_name) == 0) {
-				result = policy->check(policy->image_spec);
-				if (result == IO_SUCCESS) {
-					*image_spec = policy->image_spec;
-					*dev_handle = *(policy->dev_handle);
-					break;
-				} else {
-					result = open_semihosting(
-							policy->image_spec);
-					if (result == IO_SUCCESS) {
-						*dev_handle = sh_dev_handle;
-						*image_spec =
-							policy->image_spec;
-					}
-				}
-			}
-			policy++;
-		}
-	} else {
-		result = IO_FAIL;
-	}
 	return result;
 }
diff --git a/plat/fvp/fvp_pm.c b/plat/fvp/fvp_pm.c
index 3737ecf..b1431c4 100644
--- a/plat/fvp/fvp_pm.c
+++ b/plat/fvp/fvp_pm.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -29,21 +29,25 @@
  */
 
 #include <arch_helpers.h>
+#include <arm_config.h>
 #include <arm_gic.h>
 #include <assert.h>
-#include <bakery_lock.h>
-#include <cci.h>
 #include <debug.h>
+#include <errno.h>
 #include <mmio.h>
 #include <platform.h>
-#include <plat_config.h>
-#include <platform_def.h>
+#include <plat_arm.h>
 #include <psci.h>
-#include <errno.h>
+#include <v2m_def.h>
 #include "drivers/pwrc/fvp_pwrc.h"
 #include "fvp_def.h"
 #include "fvp_private.h"
 
+
+typedef volatile struct mailbox {
+	unsigned long value __aligned(CACHE_WRITEBACK_GRANULE);
+} mailbox_t;
+
 /*******************************************************************************
  * Private FVP function to program the mailbox for a cpu before it is released
  * from reset.
@@ -89,33 +93,6 @@
 }
 
 /*******************************************************************************
- * Private FVP function which is used to determine if any platform actions
- * should be performed for the specified affinity instance given its
- * state. Nothing needs to be done if the 'state' is not off or if this is not
- * the highest affinity level which will enter the 'state'.
- ******************************************************************************/
-static int32_t fvp_do_plat_actions(unsigned int afflvl, unsigned int state)
-{
-	unsigned int max_phys_off_afflvl;
-
-	assert(afflvl <= MPIDR_AFFLVL1);
-
-	if (state != PSCI_STATE_OFF)
-		return -EAGAIN;
-
-	/*
-	 * Find the highest affinity level which will be suspended and postpone
-	 * all the platform specific actions until that level is hit.
-	 */
-	max_phys_off_afflvl = psci_get_max_phys_off_afflvl();
-	assert(max_phys_off_afflvl != PSCI_INVALID_DATA);
-	if (afflvl != max_phys_off_afflvl)
-		return -EAGAIN;
-
-	return 0;
-}
-
-/*******************************************************************************
  * FVP handler called when an affinity instance is about to enter standby.
  ******************************************************************************/
 void fvp_affinst_standby(unsigned int power_state)
@@ -179,7 +156,7 @@
 		    unsigned int state)
 {
 	/* Determine if any platform actions need to be executed */
-	if (fvp_do_plat_actions(afflvl, state) == -EAGAIN)
+	if (arm_do_affinst_actions(afflvl, state) == -EAGAIN)
 		return;
 
 	/*
@@ -212,7 +189,7 @@
 	unsigned long mpidr;
 
 	/* Determine if any platform actions need to be executed. */
-	if (fvp_do_plat_actions(afflvl, state) == -EAGAIN)
+	if (arm_do_affinst_actions(afflvl, state) == -EAGAIN)
 		return;
 
 	/* Get the mpidr for this cpu */
@@ -245,7 +222,7 @@
 	unsigned long mpidr;
 
 	/* Determine if any platform actions need to be executed. */
-	if (fvp_do_plat_actions(afflvl, state) == -EAGAIN)
+	if (arm_do_affinst_actions(afflvl, state) == -EAGAIN)
 		return;
 
 	/* Get the mpidr for this cpu */
@@ -303,8 +280,10 @@
 static void __dead2 fvp_system_off(void)
 {
 	/* Write the System Configuration Control Register */
-	mmio_write_32(VE_SYSREGS_BASE + V2M_SYS_CFGCTRL,
-		CFGCTRL_START | CFGCTRL_RW | CFGCTRL_FUNC(FUNC_SHUTDOWN));
+	mmio_write_32(V2M_SYSREGS_BASE + V2M_SYS_CFGCTRL,
+		V2M_CFGCTRL_START |
+		V2M_CFGCTRL_RW |
+		V2M_CFGCTRL_FUNC(V2M_FUNC_SHUTDOWN));
 	wfi();
 	ERROR("FVP System Off: operation not handled.\n");
 	panic();
@@ -313,38 +292,16 @@
 static void __dead2 fvp_system_reset(void)
 {
 	/* Write the System Configuration Control Register */
-	mmio_write_32(VE_SYSREGS_BASE + V2M_SYS_CFGCTRL,
-		CFGCTRL_START | CFGCTRL_RW | CFGCTRL_FUNC(FUNC_REBOOT));
+	mmio_write_32(V2M_SYSREGS_BASE + V2M_SYS_CFGCTRL,
+		V2M_CFGCTRL_START |
+		V2M_CFGCTRL_RW |
+		V2M_CFGCTRL_FUNC(V2M_FUNC_REBOOT));
 	wfi();
 	ERROR("FVP System Reset: operation not handled.\n");
 	panic();
 }
 
 /*******************************************************************************
- * FVP handler called to check the validity of the power state parameter.
- ******************************************************************************/
-int fvp_validate_power_state(unsigned int power_state)
-{
-	/* Sanity check the requested state */
-	if (psci_get_pstate_type(power_state) == PSTATE_TYPE_STANDBY) {
-		/*
-		 * It's possible to enter standby only on affinity level 0
-		 * i.e. a cpu on the fvp. Ignore any other affinity level.
-		 */
-		if (psci_get_pstate_afflvl(power_state) != MPIDR_AFFLVL0)
-			return PSCI_E_INVALID_PARAMS;
-	}
-
-	/*
-	 * We expect the 'state id' to be zero.
-	 */
-	if (psci_get_pstate_id(power_state))
-		return PSCI_E_INVALID_PARAMS;
-
-	return PSCI_E_SUCCESS;
-}
-
-/*******************************************************************************
  * Export the platform handlers to enable psci to invoke them
  ******************************************************************************/
 static const plat_pm_ops_t fvp_plat_pm_ops = {
@@ -356,7 +313,7 @@
 	.affinst_suspend_finish = fvp_affinst_suspend_finish,
 	.system_off = fvp_system_off,
 	.system_reset = fvp_system_reset,
-	.validate_power_state = fvp_validate_power_state
+	.validate_power_state = arm_validate_power_state
 };
 
 /*******************************************************************************
diff --git a/plat/fvp/fvp_private.h b/plat/fvp/fvp_private.h
index 4f60a16..e88a45e 100644
--- a/plat/fvp/fvp_private.h
+++ b/plat/fvp/fvp_private.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2014, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2014-2015, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -31,131 +31,17 @@
 #ifndef __FVP_PRIVATE_H__
 #define __FVP_PRIVATE_H__
 
-#include <bakery_lock.h>
-#include <bl_common.h>
-#include <cpu_data.h>
-#include <platform_def.h>
-
-
-typedef volatile struct mailbox {
-	unsigned long value
-	__attribute__((__aligned__(CACHE_WRITEBACK_GRANULE)));
-} mailbox_t;
-
-/*******************************************************************************
- * This structure represents the superset of information that is passed to
- * BL31 e.g. while passing control to it from BL2 which is bl31_params
- * and bl31_plat_params and its elements
- ******************************************************************************/
-typedef struct bl2_to_bl31_params_mem {
-	bl31_params_t bl31_params;
-	image_info_t bl31_image_info;
-	image_info_t bl32_image_info;
-	image_info_t bl33_image_info;
-	entry_point_info_t bl33_ep_info;
-	entry_point_info_t bl32_ep_info;
-	entry_point_info_t bl31_ep_info;
-} bl2_to_bl31_params_mem_t;
-
-#if USE_COHERENT_MEM
-/*
- * These are wrapper macros to the Coherent Memory Bakery Lock API.
- */
-#define fvp_lock_init(_lock_arg)	bakery_lock_init(_lock_arg)
-#define fvp_lock_get(_lock_arg)		bakery_lock_get(_lock_arg)
-#define fvp_lock_release(_lock_arg)	bakery_lock_release(_lock_arg)
-
-#else
-
-/*******************************************************************************
- * Constants to specify how many bakery locks this platform implements. These
- * are used if the platform chooses not to use coherent memory for bakery lock
- * data structures.
- ******************************************************************************/
-#define FVP_MAX_BAKERIES	1
-#define FVP_PWRC_BAKERY_ID	0
-
-/*******************************************************************************
- * Definition of structure which holds platform specific per-cpu data. Currently
- * it holds only the bakery lock information for each cpu. Constants to
- * specify how many bakeries this platform implements and bakery ids are
- * specified in fvp_def.h
- ******************************************************************************/
-typedef struct fvp_cpu_data {
-	bakery_info_t pcpu_bakery_info[FVP_MAX_BAKERIES];
-} fvp_cpu_data_t;
-
-/* Macro to define the offset of bakery_info_t in fvp_cpu_data_t */
-#define FVP_CPU_DATA_LOCK_OFFSET	__builtin_offsetof\
-					    (fvp_cpu_data_t, pcpu_bakery_info)
-
-
-/*******************************************************************************
- * Helper macros for bakery lock api when using the above fvp_cpu_data_t for
- * bakery lock data structures. It assumes that the bakery_info is at the
- * beginning of the platform specific per-cpu data.
- ******************************************************************************/
-#define fvp_lock_init(_lock_arg)	/* No init required */
-#define fvp_lock_get(_lock_arg)		bakery_lock_get(_lock_arg,  	    \
-						CPU_DATA_PLAT_PCPU_OFFSET + \
-						FVP_CPU_DATA_LOCK_OFFSET)
-#define fvp_lock_release(_lock_arg)	bakery_lock_release(_lock_arg,	    \
-						CPU_DATA_PLAT_PCPU_OFFSET + \
-						FVP_CPU_DATA_LOCK_OFFSET)
-
-/*
- * Ensure that the size of the FVP specific per-cpu data structure and the size
- * of the memory allocated in generic per-cpu data for the platform are the same.
- */
-CASSERT(PLAT_PCPU_DATA_SIZE == sizeof(fvp_cpu_data_t),	\
-	fvp_pcpu_data_size_mismatch);
-
-#endif /* __USE_COHERENT_MEM__ */
+#include <plat_arm.h>
 
 /*******************************************************************************
  * Function and variable prototypes
  ******************************************************************************/
-void fvp_configure_mmu_el1(unsigned long total_base,
-			   unsigned long total_size,
-			   unsigned long,
-			   unsigned long
-#if USE_COHERENT_MEM
-			   , unsigned long,
-			   unsigned long
-#endif
-			   );
-void fvp_configure_mmu_el3(unsigned long total_base,
-			   unsigned long total_size,
-			   unsigned long,
-			   unsigned long
-#if USE_COHERENT_MEM
-			   , unsigned long,
-			   unsigned long
-#endif
-			   );
 
-int fvp_config_setup(void);
+void fvp_config_setup(void);
 
 void fvp_cci_init(void);
 void fvp_cci_enable(void);
 void fvp_cci_disable(void);
 
-void fvp_gic_init(void);
-
-/* Declarations for fvp_topology.c */
-int fvp_setup_topology(void);
-
-/* Declarations for fvp_io_storage.c */
-void fvp_io_setup(void);
-
-/* Declarations for fvp_security.c */
-void fvp_security_setup(void);
-
-/* Gets the SPR for BL32 entry */
-uint32_t fvp_get_spsr_for_bl32_entry(void);
-
-/* Gets the SPSR for BL33 entry */
-uint32_t fvp_get_spsr_for_bl33_entry(void);
-
 
 #endif /* __FVP_PRIVATE_H__ */
diff --git a/plat/fvp/fvp_security.c b/plat/fvp/fvp_security.c
index 62bde08..0cf8450 100644
--- a/plat/fvp/fvp_security.c
+++ b/plat/fvp/fvp_security.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2014, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2014-2015, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -28,23 +28,13 @@
  * POSSIBILITY OF SUCH DAMAGE.
  */
 
-#include <assert.h>
-#include <debug.h>
-#include <plat_config.h>
-#include <tzc400.h>
-#include "fvp_def.h"
-#include "fvp_private.h"
-
-/* Used to improve readability for configuring regions. */
-#define FILTER_SHIFT(filter)	(1 << filter)
+#include <arm_config.h>
+#include <plat_arm.h>
 
 /*
- * For the moment we assume that all security programming is done by the
- * primary core.
- * TODO:
- * Might want to enable interrupt on violations when supported?
+ * We assume that all security programming is done by the primary core.
  */
-void fvp_security_setup(void)
+void plat_arm_security_setup(void)
 {
 	/*
 	 * The Base FVP has a TrustZone address space controller, the Foundation
@@ -55,80 +45,6 @@
 	 * configurations, those would be configured here.
 	 */
 
-	if (!(get_plat_config()->flags & CONFIG_HAS_TZC))
-		return;
-
-	/*
-	 * The TrustZone controller controls access to main DRAM. Give
-	 * full NS access for the moment to use with OS.
-	 */
-	INFO("Configuring TrustZone Controller\n");
-
-	/*
-	 * The driver does some error checking and will assert.
-	 * - Provide base address of device on platform.
-	 * - Provide width of ACE-Lite IDs on platform.
-	 */
-	tzc_init(TZC400_BASE);
-
-	/*
-	 * Currently only filters 0 and 2 are connected on Base FVP.
-	 * Filter 0 : CPU clusters (no access to DRAM by default)
-	 * Filter 1 : not connected
-	 * Filter 2 : LCDs (access to VRAM allowed by default)
-	 * Filter 3 : not connected
-	 * Programming unconnected filters will have no effect at the
-	 * moment. These filter could, however, be connected in future.
-	 * So care should be taken not to configure the unused filters.
-	 */
-
-	/* Disable all filters before programming. */
-	tzc_disable_filters();
-
-	/*
-	 * Allow only non-secure access to all DRAM to supported devices.
-	 * Give access to the CPUs and Virtio. Some devices
-	 * would normally use the default ID so allow that too. We use
-	 * two regions to cover the blocks of physical memory in the FVPs
-	 * plus one region to reserve some memory as secure.
-	 *
-	 * Software executing in the secure state, such as a secure
-	 * boot-loader, can access the DRAM by using the NS attributes in
-	 * the MMU translation tables and descriptors.
-	 */
-
-	/* Region 1 set to cover the Non-Secure DRAM */
-	tzc_configure_region(FILTER_SHIFT(0), 1,
-			DRAM1_NS_BASE, DRAM1_NS_END,
-			TZC_REGION_S_NONE,
-			TZC_REGION_ACCESS_RDWR(FVP_NSAID_DEFAULT) |
-			TZC_REGION_ACCESS_RDWR(FVP_NSAID_PCI) |
-			TZC_REGION_ACCESS_RDWR(FVP_NSAID_AP) |
-			TZC_REGION_ACCESS_RDWR(FVP_NSAID_VIRTIO) |
-			TZC_REGION_ACCESS_RDWR(FVP_NSAID_VIRTIO_OLD));
-
-	/* Region 2 set to cover the Secure DRAM */
-	tzc_configure_region(FILTER_SHIFT(0), 2,
-			DRAM1_SEC_BASE, DRAM1_SEC_END,
-			TZC_REGION_S_RDWR,
-			0x0);
-
-	/* Region 3 set to cover the second block of DRAM */
-	tzc_configure_region(FILTER_SHIFT(0), 3,
-			DRAM2_BASE, DRAM2_END, TZC_REGION_S_NONE,
-			TZC_REGION_ACCESS_RDWR(FVP_NSAID_DEFAULT) |
-			TZC_REGION_ACCESS_RDWR(FVP_NSAID_PCI) |
-			TZC_REGION_ACCESS_RDWR(FVP_NSAID_AP) |
-			TZC_REGION_ACCESS_RDWR(FVP_NSAID_VIRTIO) |
-			TZC_REGION_ACCESS_RDWR(FVP_NSAID_VIRTIO_OLD));
-
-	/*
-	 * TODO: Interrupts are not currently supported. The only
-	 * options we have are for access errors to occur quietly or to
-	 * cause an exception. We choose to cause an exception.
-	 */
-	tzc_set_action(TZC_ACTION_ERR);
-
-	/* Enable filters. */
-	tzc_enable_filters();
+	if (get_arm_config()->flags & ARM_CONFIG_HAS_TZC)
+		arm_tzc_setup();
 }
diff --git a/plat/fvp/fvp_topology.c b/plat/fvp/fvp_topology.c
index 11ca107..168864a 100644
--- a/plat/fvp/fvp_topology.c
+++ b/plat/fvp/fvp_topology.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -28,11 +28,13 @@
  * POSSIBILITY OF SUCH DAMAGE.
  */
 
+#include <arch.h>
 #include <assert.h>
 #include <platform_def.h>
 /* TODO: Reusing psci error codes & state information. Get our own! */
 #include <psci.h>
 #include "drivers/pwrc/fvp_pwrc.h"
+#include "fvp_def.h"
 
 /* We treat '255' as an invalid affinity instance */
 #define AFFINST_INVAL	0xff
@@ -57,7 +59,7 @@
  * is a separate array for each affinity level i.e. cpus and clusters. The child
  * and sibling references allow traversal inside and in between the two arrays.
  ******************************************************************************/
-static affinity_info_t fvp_aff1_topology_map[PLATFORM_CLUSTER_COUNT];
+static affinity_info_t fvp_aff1_topology_map[ARM_CLUSTER_COUNT];
 static affinity_info_t fvp_aff0_topology_map[PLATFORM_CORE_COUNT];
 
 /* Simple global variable to safeguard us from stupidity */
@@ -113,7 +115,7 @@
 	case 0:
 		/* Assert if the cluster id is anything apart from 0 or 1 */
 		parent_aff_id = (mpidr >> MPIDR_AFF1_SHIFT) & MPIDR_AFFLVL_MASK;
-		assert(parent_aff_id < PLATFORM_CLUSTER_COUNT);
+		assert(parent_aff_id < ARM_CLUSTER_COUNT);
 
 		/* Fetch the starting index in the aff0 array */
 		for (ctr = fvp_aff1_topology_map[parent_aff_id].child;
@@ -181,19 +183,19 @@
  * the FVP flavour its running on. We construct all the mpidrs we can handle
  * and rely on the PWRC.PSYSR to flag absent cpus when their status is queried.
  ******************************************************************************/
-int fvp_setup_topology(void)
+int plat_arm_topology_setup(void)
 {
 	unsigned char aff0, aff1, aff_state, aff0_offset = 0;
 	unsigned long mpidr;
 
 	topology_setup_done = 0;
 
-	for (aff1 = 0; aff1 < PLATFORM_CLUSTER_COUNT; aff1++) {
+	for (aff1 = 0; aff1 < ARM_CLUSTER_COUNT; aff1++) {
 
 		fvp_aff1_topology_map[aff1].child = aff0_offset;
 		fvp_aff1_topology_map[aff1].sibling = aff1 + 1;
 
-		for (aff0 = 0; aff0 < PLATFORM_MAX_CPUS_PER_CLUSTER; aff0++) {
+		for (aff0 = 0; aff0 < FVP_MAX_CPUS_PER_CLUSTER; aff0++) {
 
 			mpidr = aff1 << MPIDR_AFF1_SHIFT;
 			mpidr |= aff0 << MPIDR_AFF0_SHIFT;
diff --git a/plat/fvp/fvp_trusted_boot.c b/plat/fvp/fvp_trusted_boot.c
deleted file mode 100644
index e7dcc01..0000000
--- a/plat/fvp/fvp_trusted_boot.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * Redistributions of source code must retain the above copyright notice, this
- * list of conditions and the following disclaimer.
- *
- * Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * Neither the name of ARM nor the names of its contributors may be used
- * to endorse or promote products derived from this software without specific
- * prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <assert.h>
-#include <debug.h>
-#include "fvp_def.h"
-#include "fvp_private.h"
-
-/*
- * Check the validity of the key
- *
- * 0 = success, Otherwise = error
- */
-int plat_match_rotpk(const unsigned char *key_buf, unsigned int key_len)
-{
-	/* TODO: check against the ROT key stored in the platform */
-	return 0;
-}
diff --git a/plat/fvp/include/plat_macros.S b/plat/fvp/include/plat_macros.S
index 6349c11..2feffbe 100644
--- a/plat/fvp/include/plat_macros.S
+++ b/plat/fvp/include/plat_macros.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2014, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2014-2015, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -30,33 +30,26 @@
 #ifndef __PLAT_MACROS_S__
 #define __PLAT_MACROS_S__
 
-#include <cci.h>
-#include <gic_v2.h>
-#include <plat_config.h>
+#include <arm_macros.S>
+#include <v2m_def.h>
 #include "../fvp_def.h"
 
-.section .rodata.gic_reg_name, "aS"
-gicc_regs:
-	.asciz "gicc_hppir", "gicc_ahppir", "gicc_ctlr", ""
-gicd_pend_reg:
-	.asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n Offset:\t\t\tvalue\n"
-newline:
-	.asciz "\n"
-spacer:
-	.asciz ":\t\t0x"
-
 	/* ---------------------------------------------
-	 * The below macro prints out relevant GIC
-	 * registers whenever an unhandled exception is
-	 * taken in BL3-1.
+	 * The below required platform porting macro
+	 * prints out relevant GIC registers whenever an
+	 * unhandled exception is taken in BL3-1.
 	 * Clobbers: x0 - x10, x16, x17, sp
 	 * ---------------------------------------------
 	 */
 	.macro plat_print_gic_regs
-	mov_imm	x0, (VE_SYSREGS_BASE + V2M_SYS_ID)
+	/*
+	 * Detect if we're using the base memory map or
+	 * the legacy VE memory map
+	 */
+	mov_imm	x0, (V2M_SYSREGS_BASE + V2M_SYS_ID)
 	ldr	w16, [x0]
 	/* Extract BLD (12th - 15th bits) from the SYS_ID */
-	ubfx	x16, x16, #SYS_ID_BLD_SHIFT, #4
+	ubfx	x16, x16, #V2M_SYS_ID_BLD_SHIFT, #4
 	/* Check if VE mmap */
 	cmp	w16, #BLD_GIC_VE_MMAP
 	b.eq	use_ve_mmap
@@ -70,55 +63,7 @@
 	mov_imm	x17, VE_GICC_BASE
 	mov_imm	x16, VE_GICD_BASE
 print_gicc_regs:
-	/* gicc base address is now in x17 */
-	adr	x6, gicc_regs	/* Load the gicc reg list to x6 */
-	/* Load the gicc regs to gp regs used by str_in_crash_buf_print */
-	ldr	w8, [x17, #GICC_HPPIR]
-	ldr	w9, [x17, #GICC_AHPPIR]
-	ldr	w10, [x17, #GICC_CTLR]
-	/* Store to the crash buf and print to console */
-	bl	str_in_crash_buf_print
-
-	/* Print the GICD_ISPENDR regs */
-	add	x7, x16, #GICD_ISPENDR
-	adr	x4, gicd_pend_reg
-	bl	asm_print_str
-gicd_ispendr_loop:
-	sub	x4, x7, x16
-	cmp	x4, #0x280
-	b.eq	exit_print_gic_regs
-	bl	asm_print_hex
-	adr	x4, spacer
-	bl	asm_print_str
-	ldr	x4, [x7], #8
-	bl	asm_print_hex
-	adr	x4, newline
-	bl	asm_print_str
-	b	gicd_ispendr_loop
-exit_print_gic_regs:
-	.endm
-
-.section .rodata.cci_reg_name, "aS"
-cci_iface_regs:
-	.asciz "cci_snoop_ctrl_cluster0", "cci_snoop_ctrl_cluster1" , ""
-
-	/* ------------------------------------------------
-	 * The below macro prints out relevant interconnect
-	 * registers whenever an unhandled exception is
-	 * taken in BL3-1.
-	 * Clobbers: x0 - x9, sp
-	 * ------------------------------------------------
-	 */
-	.macro plat_print_interconnect_regs
-	adr	x6, cci_iface_regs
-	/* Store in x7 the base address of the first interface */
-	mov_imm	x7, (CCI400_BASE + SLAVE_IFACE3_OFFSET)
-	ldr	w8, [x7, #SNOOP_CTRL_REG]
-	/* Store in x7 the base address of the second interface */
-	mov_imm	x7, (CCI400_BASE + SLAVE_IFACE4_OFFSET)
-	ldr	w9, [x7, #SNOOP_CTRL_REG]
-	/* Store to the crash buf and print to console */
-	bl	str_in_crash_buf_print
+	arm_print_gic_regs
 	.endm
 
 #endif /* __PLAT_MACROS_S__ */
diff --git a/plat/fvp/include/platform_def.h b/plat/fvp/include/platform_def.h
index 59b242d..c2a7d6a 100644
--- a/plat/fvp/include/platform_def.h
+++ b/plat/fvp/include/platform_def.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2014, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2014-2015, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -31,203 +31,83 @@
 #ifndef __PLATFORM_DEF_H__
 #define __PLATFORM_DEF_H__
 
-#include <arch.h>
+#include <arm_def.h>
+#include <board_arm_def.h>
+#include <common_def.h>
+#include <tzc400.h>
+#include <v2m_def.h>
 #include "../fvp_def.h"
 
 
-/*******************************************************************************
- * Platform binary types for linking
- ******************************************************************************/
-#define PLATFORM_LINKER_FORMAT          "elf64-littleaarch64"
-#define PLATFORM_LINKER_ARCH            aarch64
-
-/*******************************************************************************
- * Generic platform constants
- ******************************************************************************/
-
-/* Size of cacheable stacks */
-#if DEBUG_XLAT_TABLE
-#define PLATFORM_STACK_SIZE 0x800
-#elif IMAGE_BL1
-#if TRUSTED_BOARD_BOOT
-#define PLATFORM_STACK_SIZE 0x1000
-#else
-#define PLATFORM_STACK_SIZE 0x440
-#endif
-#elif IMAGE_BL2
-#if TRUSTED_BOARD_BOOT
-#define PLATFORM_STACK_SIZE 0x1000
-#else
-#define PLATFORM_STACK_SIZE 0x400
-#endif
-#elif IMAGE_BL31
-#define PLATFORM_STACK_SIZE 0x400
-#elif IMAGE_BL32
-#define PLATFORM_STACK_SIZE 0x440
-#endif
-
-#define FIRMWARE_WELCOME_STR		"Booting Trusted Firmware\n"
-
-/* Trusted Boot Firmware BL2 */
-#define BL2_IMAGE_NAME			"bl2.bin"
-
-/* EL3 Runtime Firmware BL31 */
-#define BL31_IMAGE_NAME			"bl31.bin"
-
-/* Secure Payload BL32 (Trusted OS) */
-#define BL32_IMAGE_NAME			"bl32.bin"
-
-/* Non-Trusted Firmware BL33 */
-#define BL33_IMAGE_NAME			"bl33.bin" /* e.g. UEFI */
-
-#if TRUSTED_BOARD_BOOT
-/* Certificates */
-# define BL2_CERT_NAME			"bl2.crt"
-# define TRUSTED_KEY_CERT_NAME		"trusted_key.crt"
-
-# define BL30_KEY_CERT_NAME		"bl30_key.crt"
-# define BL31_KEY_CERT_NAME		"bl31_key.crt"
-# define BL32_KEY_CERT_NAME		"bl32_key.crt"
-# define BL33_KEY_CERT_NAME		"bl33_key.crt"
-
-# define BL30_CERT_NAME			"bl30.crt"
-# define BL31_CERT_NAME			"bl31.crt"
-# define BL32_CERT_NAME			"bl32.crt"
-# define BL33_CERT_NAME			"bl33.crt"
-#endif /* TRUSTED_BOARD_BOOT */
-
-#define PLATFORM_CLUSTER_COUNT		2ull
-#define PLATFORM_CLUSTER0_CORE_COUNT	4
-#define PLATFORM_CLUSTER1_CORE_COUNT	4
-#define PLATFORM_CORE_COUNT		(PLATFORM_CLUSTER1_CORE_COUNT + \
-						PLATFORM_CLUSTER0_CORE_COUNT)
-#define PLATFORM_MAX_CPUS_PER_CLUSTER	4
-#define PLATFORM_NUM_AFFS		(PLATFORM_CLUSTER_COUNT + \
-					 PLATFORM_CORE_COUNT)
-#define PLATFORM_MAX_AFFLVL		MPIDR_AFFLVL1
-#define MAX_IO_DEVICES			3
-#define MAX_IO_HANDLES			4
-
-/*******************************************************************************
- * BL1 specific defines.
- * BL1 RW data is relocated from ROM to RAM at runtime so we need 2 sets of
- * addresses.
- ******************************************************************************/
-#define BL1_RO_BASE			FVP_TRUSTED_ROM_BASE
-#define BL1_RO_LIMIT			(FVP_TRUSTED_ROM_BASE \
-					+ FVP_TRUSTED_ROM_SIZE)
 /*
- * Put BL1 RW at the top of the Trusted SRAM. BL1_RW_BASE is calculated using
- * the current BL1 RW debug size plus a little space for growth.
+ * Most platform porting definitions provided by included headers
  */
-#if TRUSTED_BOARD_BOOT
-#define BL1_RW_BASE			(FVP_TRUSTED_SRAM_BASE \
-					+ FVP_TRUSTED_SRAM_SIZE - 0x8000)
-#else
-#define BL1_RW_BASE			(FVP_TRUSTED_SRAM_BASE \
-					+ FVP_TRUSTED_SRAM_SIZE - 0x6000)
-#endif
-#define BL1_RW_LIMIT			(FVP_TRUSTED_SRAM_BASE \
-					+ FVP_TRUSTED_SRAM_SIZE)
-
-/*******************************************************************************
- * BL2 specific defines.
- ******************************************************************************/
-/*
- * Put BL2 just below BL3-1. BL2_BASE is calculated using the current BL2 debug
- * size plus a little space for growth.
- */
-#if TRUSTED_BOARD_BOOT
-#define BL2_BASE			(BL31_BASE - 0x1C000)
-#else
-#define BL2_BASE			(BL31_BASE - 0xC000)
-#endif
-#define BL2_LIMIT			BL31_BASE
-
-/*******************************************************************************
- * BL31 specific defines.
- ******************************************************************************/
-/*
- * Put BL3-1 at the top of the Trusted SRAM. BL31_BASE is calculated using the
- * current BL3-1 debug size plus a little space for growth.
- */
-#define BL31_BASE			(FVP_TRUSTED_SRAM_BASE \
-					+ FVP_TRUSTED_SRAM_SIZE - 0x1D000)
-#define BL31_PROGBITS_LIMIT		BL1_RW_BASE
-#define BL31_LIMIT			(FVP_TRUSTED_SRAM_BASE \
-					+ FVP_TRUSTED_SRAM_SIZE)
-
-/*******************************************************************************
- * BL32 specific defines.
- ******************************************************************************/
-/*
- * On FVP, the TSP can execute from Trusted SRAM, Trusted DRAM or the DRAM
- * region secured by the TrustZone controller.
- */
-#if FVP_TSP_RAM_LOCATION_ID == FVP_TRUSTED_SRAM_ID
-# define TSP_SEC_MEM_BASE		FVP_TRUSTED_SRAM_BASE
-# define TSP_SEC_MEM_SIZE		FVP_TRUSTED_SRAM_SIZE
-# define TSP_PROGBITS_LIMIT		BL2_BASE
-# define BL32_BASE			FVP_TRUSTED_SRAM_BASE
-# define BL32_LIMIT			BL31_BASE
-#elif FVP_TSP_RAM_LOCATION_ID == FVP_TRUSTED_DRAM_ID
-# define TSP_SEC_MEM_BASE		FVP_TRUSTED_DRAM_BASE
-# define TSP_SEC_MEM_SIZE		FVP_TRUSTED_DRAM_SIZE
-# define BL32_BASE			FVP_TRUSTED_DRAM_BASE
-# define BL32_LIMIT			(FVP_TRUSTED_DRAM_BASE + (1 << 21))
-#elif FVP_TSP_RAM_LOCATION_ID == FVP_DRAM_ID
-# define TSP_SEC_MEM_BASE		DRAM1_SEC_BASE
-# define TSP_SEC_MEM_SIZE		DRAM1_SEC_SIZE
-# define BL32_BASE			DRAM1_SEC_BASE
-# define BL32_LIMIT			(DRAM1_SEC_BASE + DRAM1_SEC_SIZE)
-#else
-# error "Unsupported FVP_TSP_RAM_LOCATION_ID value"
-#endif
 
 /*
- * ID of the secure physical generic timer interrupt used by the TSP.
+ * Required ARM standard platform porting definitions
  */
-#define TSP_IRQ_SEC_PHY_TIMER		IRQ_SEC_PHY_TIMER
+#define PLAT_ARM_CLUSTER0_CORE_COUNT	4
+#define PLAT_ARM_CLUSTER1_CORE_COUNT	4
 
-/*******************************************************************************
- * Platform specific page table and MMU setup constants
- ******************************************************************************/
-#define ADDR_SPACE_SIZE			(1ull << 32)
+#define PLAT_ARM_TRUSTED_ROM_BASE	0x00000000
+#define PLAT_ARM_TRUSTED_ROM_SIZE	0x04000000	/* 64 MB */
 
-#if IMAGE_BL1
-# define MAX_XLAT_TABLES		2
-#elif IMAGE_BL2
-# define MAX_XLAT_TABLES		3
-#elif IMAGE_BL31
-# define MAX_XLAT_TABLES		2
-#elif IMAGE_BL32
-# if FVP_TSP_RAM_LOCATION_ID == FVP_DRAM_ID
-#  define MAX_XLAT_TABLES		3
-# else
-#  define MAX_XLAT_TABLES		2
-# endif
-#endif
+#define PLAT_ARM_TRUSTED_DRAM_BASE	0x06000000
+#define PLAT_ARM_TRUSTED_DRAM_SIZE	0x02000000	/* 32 MB */
 
-#define MAX_MMAP_REGIONS		(FVP_MMAP_ENTRIES + FVP_BL_REGIONS)
+/* No SCP in FVP */
+#define PLAT_ARM_SCP_TZC_DRAM1_SIZE	MAKE_ULL(0x0)
 
-/*******************************************************************************
- * Declarations and constants to access the mailboxes safely. Each mailbox is
- * aligned on the biggest cache line size in the platform. This is known only
- * to the platform as it might have a combination of integrated and external
- * caches. Such alignment ensures that two maiboxes do not sit on the same cache
- * line at any cache level. They could belong to different cpus/clusters &
- * get written while being protected by different locks causing corruption of
- * a valid mailbox address.
- ******************************************************************************/
-#define CACHE_WRITEBACK_SHIFT   6
-#define CACHE_WRITEBACK_GRANULE (1 << CACHE_WRITEBACK_SHIFT)
+#define PLAT_ARM_DRAM2_SIZE		MAKE_ULL(0x780000000)
 
-#if !USE_COHERENT_MEM
-/*******************************************************************************
- * Size of the per-cpu data in bytes that should be reserved in the generic
- * per-cpu data structure for the FVP port.
- ******************************************************************************/
-#define PLAT_PCPU_DATA_SIZE	2
-#endif
+#define PLAT_ARM_SHARED_RAM_CACHED	1
+
+/*
+ * Load address of BL3-3 for this platform port
+ */
+#define PLAT_ARM_NS_IMAGE_OFFSET	(ARM_DRAM1_BASE + 0x8000000)
+
+
+/*
+ * PL011 related constants
+ */
+#define PLAT_ARM_BOOT_UART_BASE		V2M_IOFPGA_UART0_BASE
+#define PLAT_ARM_BOOT_UART_CLK_IN_HZ	V2M_IOFPGA_UART0_CLK_IN_HZ
+
+#define PLAT_ARM_CRASH_UART_BASE	V2M_IOFPGA_UART1_BASE
+#define PLAT_ARM_CRASH_UART_CLK_IN_HZ	V2M_IOFPGA_UART1_CLK_IN_HZ
+
+#define PLAT_ARM_TSP_UART_BASE		V2M_IOFPGA_UART2_BASE
+#define PLAT_ARM_TSP_UART_CLK_IN_HZ	V2M_IOFPGA_UART2_CLK_IN_HZ
+
+/* CCI related constants */
+#define PLAT_ARM_CCI_BASE		0x2c090000
+#define PLAT_ARM_CCI_CLUSTER0_SL_IFACE_IX	3
+#define PLAT_ARM_CCI_CLUSTER1_SL_IFACE_IX	4
+
+/* TrustZone controller related constants
+ *
+ * Currently only filters 0 and 2 are connected on Base FVP.
+ * Filter 0 : CPU clusters (no access to DRAM by default)
+ * Filter 1 : not connected
+ * Filter 2 : LCDs (access to VRAM allowed by default)
+ * Filter 3 : not connected
+ * Programming unconnected filters will have no effect at the
+ * moment. These filter could, however, be connected in future.
+ * So care should be taken not to configure the unused filters.
+ *
+ * Allow only non-secure access to all DRAM to supported devices.
+ * Give access to the CPUs and Virtio. Some devices
+ * would normally use the default ID so allow that too.
+ */
+#define PLAT_ARM_TZC_FILTERS		REG_ATTR_FILTER_BIT(0)
+
+#define PLAT_ARM_TZC_NS_DEV_ACCESS	(				\
+		TZC_REGION_ACCESS_RDWR(FVP_NSAID_DEFAULT)	|	\
+		TZC_REGION_ACCESS_RDWR(FVP_NSAID_PCI)		|	\
+		TZC_REGION_ACCESS_RDWR(FVP_NSAID_AP)		|	\
+		TZC_REGION_ACCESS_RDWR(FVP_NSAID_VIRTIO)	|	\
+		TZC_REGION_ACCESS_RDWR(FVP_NSAID_VIRTIO_OLD))
+
 
 #endif /* __PLATFORM_DEF_H__ */
diff --git a/plat/fvp/include/platform_oid.h b/plat/fvp/include/platform_oid.h
index 38aca12..1e44cf7 100644
--- a/plat/fvp/include/platform_oid.h
+++ b/plat/fvp/include/platform_oid.h
@@ -27,43 +27,9 @@
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGE.
  */
-
-#ifndef PLATFORM_OID_H_
-#define PLATFORM_OID_H_
+#include "../../../../../include/plat/arm/board/common/board_arm_oid.h"
 
 /*
- * This is the list of the different extensions containing relevant information
- * to establish the chain of trust.
- *
- * The OIDs shown here are just an example. Real OIDs should be obtained from
- * the ITU-T.
+ * Required platform OIDs
+ * (Provided by included header)
  */
-
-/* Non-volatile counter extensions */
-#define TZ_FW_NVCOUNTER_OID		"1.2.3.1"
-#define NTZ_FW_NVCOUNTER_OID		"1.2.3.2"
-
-/* BL2 extensions */
-#define BL2_HASH_OID			"1.2.3.3"
-
-/* Trusted Key extensions */
-#define TZ_WORLD_PK_OID			"1.2.3.4"
-#define NTZ_WORLD_PK_OID		"1.2.3.5"
-
-/* BL3-1 extensions */
-#define BL31_CONTENT_CERT_PK_OID	"1.2.3.6"
-#define BL31_HASH_OID			"1.2.3.7"
-
-/* BL3-0 extensions */
-#define BL30_CONTENT_CERT_PK_OID	"1.2.3.8"
-#define BL30_HASH_OID			"1.2.3.9"
-
-/* BL3-2 extensions */
-#define BL32_CONTENT_CERT_PK_OID	"1.2.3.10"
-#define BL32_HASH_OID			"1.2.3.11"
-
-/* BL3-3 extensions */
-#define BL33_CONTENT_CERT_PK_OID	"1.2.3.12"
-#define BL33_HASH_OID			"1.2.3.13"
-
-#endif /* PLATFORM_OID_H_ */
diff --git a/plat/fvp/platform.mk b/plat/fvp/platform.mk
index 7cf571e..c20cd08 100644
--- a/plat/fvp/platform.mk
+++ b/plat/fvp/platform.mk
@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
@@ -28,69 +28,45 @@
 # POSSIBILITY OF SUCH DAMAGE.
 #
 
-# On FVP, the TSP can execute either from Trusted SRAM or Trusted DRAM.
-# Trusted SRAM is the default.
-FVP_TSP_RAM_LOCATION	:=	tsram
-ifeq (${FVP_TSP_RAM_LOCATION}, tsram)
-  FVP_TSP_RAM_LOCATION_ID := FVP_TRUSTED_SRAM_ID
-else ifeq (${FVP_TSP_RAM_LOCATION}, tdram)
-  FVP_TSP_RAM_LOCATION_ID := FVP_TRUSTED_DRAM_ID
-else ifeq (${FVP_TSP_RAM_LOCATION}, dram)
-  FVP_TSP_RAM_LOCATION_ID := FVP_DRAM_ID
-else
-  $(error "Unsupported FVP_TSP_RAM_LOCATION value")
-endif
 
-# Process flags
-$(eval $(call add_define,FVP_TSP_RAM_LOCATION_ID))
+PLAT_INCLUDES		:=	-Iinclude/plat/arm/board/common			\
+				-Iplat/fvp/include
 
-PLAT_INCLUDES		:=	-Iplat/fvp/include/
 
 PLAT_BL_COMMON_SOURCES	:=	drivers/arm/pl011/pl011_console.S		\
-				drivers/io/io_fip.c				\
-				drivers/io/io_memmap.c				\
-				drivers/io/io_semihosting.c			\
-				drivers/io/io_storage.c				\
-				lib/aarch64/xlat_tables.c			\
-				lib/semihosting/semihosting.c			\
-				lib/semihosting/aarch64/semihosting_call.S	\
-				plat/common/aarch64/plat_common.c		\
-				plat/fvp/fvp_io_storage.c
-
-BL1_SOURCES		+=	drivers/arm/cci/cci.c				\
-				lib/cpus/aarch64/aem_generic.S			\
-				lib/cpus/aarch64/cortex_a53.S			\
-				lib/cpus/aarch64/cortex_a57.S			\
-				plat/common/aarch64/platform_up_stack.S		\
-				plat/fvp/bl1_fvp_setup.c			\
-				plat/fvp/aarch64/fvp_common.c			\
-				plat/fvp/aarch64/fvp_helpers.S
-
-BL2_SOURCES		+=	drivers/arm/tzc400/tzc400.c			\
-				plat/common/aarch64/platform_up_stack.S		\
-				plat/fvp/bl2_fvp_setup.c			\
-				plat/fvp/fvp_security.c				\
 				plat/fvp/aarch64/fvp_common.c
 
-BL31_SOURCES		+=	drivers/arm/cci/cci.c				\
-				drivers/arm/gic/arm_gic.c			\
-				drivers/arm/gic/gic_v2.c			\
-				drivers/arm/gic/gic_v3.c			\
-				drivers/arm/tzc400/tzc400.c			\
+BL1_SOURCES		+=	drivers/io/io_semihosting.c			\
 				lib/cpus/aarch64/aem_generic.S			\
 				lib/cpus/aarch64/cortex_a53.S			\
 				lib/cpus/aarch64/cortex_a57.S			\
-				plat/common/plat_gic.c				\
-				plat/common/aarch64/platform_mp_stack.S		\
+				lib/semihosting/semihosting.c			\
+				lib/semihosting/aarch64/semihosting_call.S	\
+				plat/fvp/aarch64/fvp_helpers.S			\
+				plat/fvp/bl1_fvp_setup.c			\
+				plat/fvp/fvp_io_storage.c
+
+BL2_SOURCES		+=	drivers/io/io_semihosting.c			\
+				lib/semihosting/semihosting.c			\
+				lib/semihosting/aarch64/semihosting_call.S	\
+				plat/fvp/bl2_fvp_setup.c			\
+				plat/fvp/fvp_io_storage.c			\
+				plat/fvp/fvp_security.c
+
+BL31_SOURCES		+=	lib/cpus/aarch64/aem_generic.S			\
+				lib/cpus/aarch64/cortex_a53.S			\
+				lib/cpus/aarch64/cortex_a57.S			\
 				plat/fvp/bl31_fvp_setup.c			\
 				plat/fvp/fvp_pm.c				\
 				plat/fvp/fvp_security.c				\
 				plat/fvp/fvp_topology.c				\
 				plat/fvp/aarch64/fvp_helpers.S			\
-				plat/fvp/aarch64/fvp_common.c			\
 				plat/fvp/drivers/pwrc/fvp_pwrc.c
 
 ifneq (${TRUSTED_BOARD_BOOT},0)
-  BL1_SOURCES		+=	plat/fvp/fvp_trusted_boot.c
-  BL2_SOURCES		+=	plat/fvp/fvp_trusted_boot.c
+  BL1_SOURCES		+=	plat/arm/board/common/board_arm_trusted_boot.c
+  BL2_SOURCES		+=	plat/arm/board/common/board_arm_trusted_boot.c
 endif
+
+
+include plat/arm/common/arm_common.mk
diff --git a/plat/fvp/tsp/tsp-fvp.mk b/plat/fvp/tsp/tsp-fvp.mk
index d2e112a..8ba3784 100644
--- a/plat/fvp/tsp/tsp-fvp.mk
+++ b/plat/fvp/tsp/tsp-fvp.mk
@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
@@ -29,10 +29,6 @@
 #
 
 # TSP source files specific to FVP platform
-BL32_SOURCES		+=	drivers/arm/gic/arm_gic.c			\
-				drivers/arm/gic/gic_v2.c			\
-				plat/common/aarch64/platform_mp_stack.S		\
-				plat/common/plat_gic.c				\
-				plat/fvp/aarch64/fvp_common.c			\
-				plat/fvp/aarch64/fvp_helpers.S			\
-				plat/fvp/tsp/tsp_fvp_setup.c
+BL32_SOURCES		+=	plat/fvp/tsp/tsp_fvp_setup.c
+
+include plat/arm/common/tsp/arm_tsp.mk
diff --git a/plat/fvp/tsp/tsp_fvp_setup.c b/plat/fvp/tsp/tsp_fvp_setup.c
index d8f46bd..64246db 100644
--- a/plat/fvp/tsp/tsp_fvp_setup.c
+++ b/plat/fvp/tsp/tsp_fvp_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -28,84 +28,13 @@
  * POSSIBILITY OF SUCH DAMAGE.
  */
 
-#include <bl_common.h>
-#include <console.h>
-#include <platform_tsp.h>
-#include "../fvp_def.h"
+#include <plat_arm.h>
 #include "../fvp_private.h"
 
-/*******************************************************************************
- * Declarations of linker defined symbols which will help us find the layout
- * of trusted SRAM
- ******************************************************************************/
-extern unsigned long __RO_START__;
-extern unsigned long __RO_END__;
-extern unsigned long __BL32_END__;
-
-#if USE_COHERENT_MEM
-extern unsigned long __COHERENT_RAM_START__;
-extern unsigned long __COHERENT_RAM_END__;
-#endif
-
-/*
- * The next 3 constants identify the extents of the code & RO data region and
- * the limit of the BL3-2 image. These addresses are used by the MMU setup code
- * and therefore they must be page-aligned.  It is the responsibility of the
- * linker script to ensure that __RO_START__, __RO_END__ & & __BL32_END__
- * linker symbols refer to page-aligned addresses.
- */
-#define BL32_RO_BASE (unsigned long)(&__RO_START__)
-#define BL32_RO_LIMIT (unsigned long)(&__RO_END__)
-#define BL32_END (unsigned long)(&__BL32_END__)
-
-#if USE_COHERENT_MEM
-/*
- * The next 2 constants identify the extents of the coherent memory region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to
- * page-aligned addresses.
- */
-#define BL32_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
-#define BL32_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
-#endif
-
-/*******************************************************************************
- * Initialize the UART
- ******************************************************************************/
 void tsp_early_platform_setup(void)
 {
-	/*
-	 * Initialize a different console than already in use to display
-	 * messages from TSP
-	 */
-	console_init(PL011_UART2_BASE, PL011_UART2_CLK_IN_HZ, PL011_BAUDRATE);
+	arm_tsp_early_platform_setup();
 
 	/* Initialize the platform config for future decision making */
 	fvp_config_setup();
 }
-
-/*******************************************************************************
- * Perform platform specific setup placeholder
- ******************************************************************************/
-void tsp_platform_setup(void)
-{
-	fvp_gic_init();
-}
-
-/*******************************************************************************
- * Perform the very early platform specific architectural setup here. At the
- * moment this is only intializes the MMU
- ******************************************************************************/
-void tsp_plat_arch_setup(void)
-{
-	fvp_configure_mmu_el1(BL32_RO_BASE,
-			      (BL32_END - BL32_RO_BASE),
-			      BL32_RO_BASE,
-			      BL32_RO_LIMIT
-#if USE_COHERENT_MEM
-			      , BL32_COHERENT_RAM_BASE,
-			      BL32_COHERENT_RAM_LIMIT
-#endif
-			      );
-}