diff --git a/plat/common/aarch64/crash_console_helpers.S b/plat/common/aarch64/crash_console_helpers.S
index 55e7abb..8f8ca11 100644
--- a/plat/common/aarch64/crash_console_helpers.S
+++ b/plat/common/aarch64/crash_console_helpers.S
@@ -20,53 +20,163 @@
 #error "This crash console implementation only works with the MULTI_CONSOLE_API!"
 #endif
 
-	/* -----------------------------------------------------
+	/*
+	 * Spinlock to syncronize access to crash_console_triggered. We cannot
+	 * acquire spinlocks when the cache is disabled, so in some cases (like
+	 * late during CPU suspend) some risk remains.
+	 */
+.section .data.crash_console_spinlock
+	define_asm_spinlock crash_console_spinlock
+
+	/*
+	 * Flag to make sure that only one CPU can write a crash dump even if
+	 * multiple crash at the same time. Interleaving crash dumps on the same
+	 * console would just make the output unreadable, so it's better to only
+	 * get a single but uncorrupted dump. This also means that we don't have
+	 * to duplicate the reg_stash below for each CPU.
+	 */
+.section .data.crash_console_triggered
+	crash_console_triggered: .byte 0
+
+	/*
+	 * Space to stash away some register values while we're calling into
+	 * console drivers and don't have a real stack available. We need x14,
+	 * x15 and x30 for bookkeeping within the plat_crash_console functions
+	 * themselves, and some console drivers use x16 and x17 as additional
+	 * scratch space that is not preserved by the main crash reporting
+	 * framework. (Note that x16 and x17 should really never be expected to
+	 * retain their values across any function call, even between carefully
+	 * designed assembly functions, since the linker is always free to
+	 * insert a function call veneer that uses these registers as scratch
+	 * space at any time. The current crash reporting framework doesn't
+	 * really respect that, but since TF is usually linked as a single
+	 * contiguous binary of less than 128MB, it seems to work in practice.)
+	 */
+.section .data.crash_console_reg_stash
+	.align 3
+	crash_console_reg_stash: .quad 0, 0, 0, 0, 0
+
+	/* --------------------------------------------------------------------
 	 * int plat_crash_console_init(void)
-	 * Use normal console by default. Switch it to crash
-	 * mode so serial consoles become active again.
-	 * NOTE: This default implementation will only work for
-	 * crashes that occur after a normal console (marked
-	 * valid for the crash state) has been registered with
-	 * the console framework. To debug crashes that occur
-	 * earlier, the platform has to override these functions
-	 * with an implementation that initializes a console
-	 * driver with hardcoded parameters. See
-	 * docs/porting-guide.rst for more information.
-	 * -----------------------------------------------------
+	 * Takes the crash console spinlock (if possible) and checks the trigger
+	 * flag to make sure we're the first CPU to dump. If not, return an
+	 * error (so crash dumping will fail but the CPU will still call
+	 * plat_panic_handler() which may do important platform-specific tasks
+	 * that may be needed on all crashing CPUs). In either case, the lock
+	 * will be released so other CPUs can make forward progress on this.
+	 * Clobbers: x0 - x4, x30
+	 * --------------------------------------------------------------------
 	 */
 func plat_crash_console_init
-#if defined(IMAGE_BL1)
-	/*
-	 * BL1 code can possibly crash so early that the data segment is not yet
-	 * accessible. Don't risk undefined behavior by trying to run the normal
-	 * console framework. Platforms that want to debug BL1 will need to
-	 * override this with custom functions that can run from registers only.
-	 */
-	mov	x0, #0
-	ret
-#else	/* IMAGE_BL1 */
-	mov	x3, x30
-	mov	x0, #CONSOLE_FLAG_CRASH
-	bl	console_switch_state
+#if defined(IMAGE_BL31)
+	mov	x4, x30		/* x3 and x4 are not clobbered by spin_lock() */
+	mov	x3, #0		/* return value */
+
+	mrs	x1, sctlr_el3
+	tst	x1, #SCTLR_C_BIT
+	beq	skip_spinlock	/* can't synchronize when cache disabled */
+
+	adrp	x0, crash_console_spinlock
+	add	x0, x0, :lo12:crash_console_spinlock
+	bl	spin_lock
+
+skip_spinlock:
+	adrp	x1, crash_console_triggered
+	add	x1, x1, :lo12:crash_console_triggered
+	ldarb	w2, [x1]
+	cmp	w2, #0
+	bne	init_error
+
+	mov	x3, #1		/* set return value to success */
+	stlrb	w3, [x1]
+
+init_error:
+	bl	spin_unlock	/* harmless if we didn't acquire the lock */
+	mov	x0, x3
+	ret	x4
+#else	/* Only one CPU in BL1/BL2, no need to synchronize anything */
 	mov	x0, #1
-	ret	x3
+	ret
 #endif
 endfunc plat_crash_console_init
 
-	/* -----------------------------------------------------
-	 * void plat_crash_console_putc(int character)
-	 * Output through the normal console by default.
-	 * -----------------------------------------------------
+	/* --------------------------------------------------------------------
+	 * int plat_crash_console_putc(char c)
+	 * Prints the character on all consoles registered with the console
+	 * framework that have CONSOLE_FLAG_CRASH set. Note that this is only
+	 * helpful for crashes that occur after the platform intialization code
+	 * has registered a console. Platforms using this implementation need to
+	 * ensure that all console drivers they use that have the CRASH flag set
+	 * support this (i.e. are written in assembly and comply to the register
+	 * clobber requirements of plat_crash_console_putc().
+	 * --------------------------------------------------------------------
 	 */
 func plat_crash_console_putc
-	b	console_putc
+	adrp	x1, crash_console_reg_stash
+	add	x1, x1, :lo12:crash_console_reg_stash
+	stp	x14, x15, [x1]
+	stp	x16, x17, [x1, #16]
+	str	x30, [x1, #32]
+
+	mov	w14, w0				/* W14 = character to print */
+	adrp	x15, console_list
+	ldr	x15, [x15, :lo12:console_list]	/* X15 = first console struct */
+
+putc_loop:
+	cbz	x15, putc_done
+	ldr	w1, [x15, #CONSOLE_T_FLAGS]
+	tst	w1, #CONSOLE_FLAG_CRASH
+	b.eq	putc_continue
+	ldr	x2, [x15, #CONSOLE_T_PUTC]
+	cbz	x2, putc_continue
+	mov	x1, x15
+	blr	x2
+	mov	w0, w14
+putc_continue:
+	ldr	x15, [x15]			/* X15 = next struct */
+	b	putc_loop
+
+putc_done:
+	adrp	x1, crash_console_reg_stash
+	add	x1, x1, :lo12:crash_console_reg_stash
+	ldp	x14, x15, [x1]
+	ldp	x16, x17, [x1, #16]
+	ldr	x30, [x1, #32]
+	ret
 endfunc plat_crash_console_putc
 
-	/* -----------------------------------------------------
-	 * void plat_crash_console_flush(void)
-	 * Flush normal console by default.
-	 * -----------------------------------------------------
+	/* --------------------------------------------------------------------
+	 * int plat_crash_console_flush(char c)
+	 * Flushes all consoles registered with the console framework that have
+	 * CONSOLE_FLAG_CRASH set. Same requirements as putc().
+	 * --------------------------------------------------------------------
 	 */
 func plat_crash_console_flush
-	b	console_flush
+	adrp	x1, crash_console_reg_stash
+	add	x1, x1, :lo12:crash_console_reg_stash
+	stp	x30, x15, [x1]
+	stp	x16, x17, [x1, #16]
+
+	adrp	x15, console_list
+	ldr	x15, [x15, :lo12:console_list]	/* X15 = first console struct */
+
+flush_loop:
+	cbz	x15, flush_done
+	ldr	w1, [x15, #CONSOLE_T_FLAGS]
+	tst	w1, #CONSOLE_FLAG_CRASH
+	b.eq	flush_continue
+	ldr	x2, [x15, #CONSOLE_T_FLUSH]
+	cbz	x2, flush_continue
+	mov	x0, x15
+	blr	x2
+flush_continue:
+	ldr	x15, [x15]			/* X15 = next struct */
+	b	flush_loop
+
+flush_done:
+	adrp	x1, crash_console_reg_stash
+	add	x1, x1, :lo12:crash_console_reg_stash
+	ldp	x30, x15, [x1]
+	ldp	x16, x17, [x1, #16]
+	ret
 endfunc plat_crash_console_flush