diff --git a/bl1/aarch64/bl1_context_mgmt.c b/bl1/aarch64/bl1_context_mgmt.c
index 2a8d58e..b9a7e5b 100644
--- a/bl1/aarch64/bl1_context_mgmt.c
+++ b/bl1/aarch64/bl1_context_mgmt.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2021, Arm Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -16,6 +16,7 @@
 
 /* Following contains the cpu context pointers. */
 static void *bl1_cpu_context_ptr[2];
+entry_point_info_t *bl2_ep_info;
 
 
 void *cm_get_context(uint32_t security_state)
@@ -30,6 +31,40 @@
 	bl1_cpu_context_ptr[security_state] = context;
 }
 
+#if ENABLE_RME
+/*******************************************************************************
+ * This function prepares the entry point information to run BL2 in Root world,
+ * i.e. EL3, for the case when FEAT_RME is enabled.
+ ******************************************************************************/
+void bl1_prepare_next_image(unsigned int image_id)
+{
+	image_desc_t *bl2_desc;
+
+	assert(image_id == BL2_IMAGE_ID);
+
+	/* Get the image descriptor. */
+	bl2_desc = bl1_plat_get_image_desc(BL2_IMAGE_ID);
+	assert(bl2_desc != NULL);
+
+	/* Get the entry point info. */
+	bl2_ep_info = &bl2_desc->ep_info;
+
+	bl2_ep_info->spsr = (uint32_t)SPSR_64(MODE_EL3, MODE_SP_ELX,
+						DISABLE_ALL_EXCEPTIONS);
+
+	/*
+	 * Flush cache since bl2_ep_info is accessed after MMU is disabled
+	 * before jumping to BL2.
+	 */
+	flush_dcache_range((uintptr_t)bl2_ep_info, sizeof(entry_point_info_t));
+
+	/* Indicate that image is in execution state. */
+	bl2_desc->state = IMAGE_STATE_EXECUTED;
+
+	/* Print debug info and flush the console before running BL2. */
+	print_entry_point_info(bl2_ep_info);
+}
+#else
 /*******************************************************************************
  * This function prepares the context for Secure/Normal world images.
  * Normal world images are transitioned to EL2(if supported) else EL1.
@@ -93,3 +128,4 @@
 
 	print_entry_point_info(next_bl_ep);
 }
+#endif /* ENABLE_RME */
diff --git a/bl1/aarch64/bl1_entrypoint.S b/bl1/aarch64/bl1_entrypoint.S
index 00f2718..f61c060 100644
--- a/bl1/aarch64/bl1_entrypoint.S
+++ b/bl1/aarch64/bl1_entrypoint.S
@@ -1,13 +1,15 @@
 /*
- * Copyright (c) 2013-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2021, Arm Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
 
 #include <arch.h>
+#include <common/bl_common.h>
 #include <el3_common_macros.S>
 
 	.globl	bl1_entrypoint
+	.globl	bl1_run_bl2_in_root
 
 
 	/* -----------------------------------------------------
@@ -66,5 +68,41 @@
 	 * Do the transition to next boot image.
 	 * --------------------------------------------------
 	 */
+#if ENABLE_RME
+	b	bl1_run_bl2_in_root
+#else
 	b	el3_exit
+#endif
 endfunc bl1_entrypoint
+
+	/* -----------------------------------------------------
+	 * void bl1_run_bl2_in_root();
+	 * This function runs BL2 in root/EL3 when RME is enabled.
+	 * -----------------------------------------------------
+	 */
+
+func bl1_run_bl2_in_root
+	/* read bl2_ep_info */
+	adrp	x20, bl2_ep_info
+	add	x20, x20, :lo12:bl2_ep_info
+	ldr	x20, [x20]
+
+	/* ---------------------------------------------
+	 * MMU needs to be disabled because BL2 executes
+	 * in EL3. It will initialize the address space
+	 * according to its own requirements.
+	 * ---------------------------------------------
+	 */
+	bl	disable_mmu_icache_el3
+	tlbi	alle3
+
+	ldp	x0, x1, [x20, #ENTRY_POINT_INFO_PC_OFFSET]
+	msr	elr_el3, x0
+	msr	spsr_el3, x1
+
+	ldp	x6, x7, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x30)]
+	ldp	x4, x5, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x20)]
+	ldp	x2, x3, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x10)]
+	ldp	x0, x1, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x0)]
+	exception_return
+endfunc bl1_run_bl2_in_root
diff --git a/bl1/bl1_private.h b/bl1/bl1_private.h
index 2cfeeea..e119ba7 100644
--- a/bl1/bl1_private.h
+++ b/bl1/bl1_private.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2021, Arm Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -11,6 +11,8 @@
 
 #include <common/bl_common.h>
 
+extern entry_point_info_t *bl2_ep_info;
+
 /******************************************
  * Function prototypes
  *****************************************/
@@ -18,6 +20,7 @@
 void bl1_arch_next_el_setup(void);
 
 void bl1_prepare_next_image(unsigned int image_id);
+void bl1_run_bl2_in_root(void);
 
 u_register_t bl1_fwu_smc_handler(unsigned int smc_fid,
 		u_register_t x1,
diff --git a/bl2/aarch32/bl2_el3_entrypoint.S b/bl2/aarch32/bl2_el3_entrypoint.S
index 7e85551..40154aa 100644
--- a/bl2/aarch32/bl2_el3_entrypoint.S
+++ b/bl2/aarch32/bl2_el3_entrypoint.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2017-2021, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2017-2021, Arm Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -10,7 +10,6 @@
 #include <el3_common_macros.S>
 
 	.globl	bl2_entrypoint
-	.globl	bl2_run_next_image
 
 
 func bl2_entrypoint
@@ -56,37 +55,3 @@
 	no_ret	plat_panic_handler
 
 endfunc bl2_entrypoint
-
-func bl2_run_next_image
-	mov	r8,r0
-
-	/*
-	 * MMU needs to be disabled because both BL2 and BL32 execute
-	 * in PL1, and therefore share the same address space.
-	 * BL32 will initialize the address space according to its
-	 * own requirement.
-	 */
-	bl	disable_mmu_icache_secure
-	stcopr	r0, TLBIALL
-	dsb	sy
-	isb
-	mov	r0, r8
-	bl	bl2_el3_plat_prepare_exit
-
-	/*
-	 * Extract PC and SPSR based on struct `entry_point_info_t`
-	 * and load it in LR and SPSR registers respectively.
-	 */
-	ldr	lr, [r8, #ENTRY_POINT_INFO_PC_OFFSET]
-	ldr	r1, [r8, #(ENTRY_POINT_INFO_PC_OFFSET + 4)]
-	msr	spsr_xc, r1
-
-	/* Some BL32 stages expect lr_svc to provide the BL33 entry address */
-	cps	#MODE32_svc
-	ldr	lr, [r8, #ENTRY_POINT_INFO_LR_SVC_OFFSET]
-	cps	#MODE32_mon
-
-	add	r8, r8, #ENTRY_POINT_INFO_ARGS_OFFSET
-	ldm	r8, {r0, r1, r2, r3}
-	exception_return
-endfunc bl2_run_next_image
diff --git a/bl2/aarch32/bl2_run_next_image.S b/bl2/aarch32/bl2_run_next_image.S
new file mode 100644
index 0000000..0b3554e
--- /dev/null
+++ b/bl2/aarch32/bl2_run_next_image.S
@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2021, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <common/bl_common.h>
+
+	.globl	bl2_run_next_image
+
+
+func bl2_run_next_image
+	mov	r8,r0
+
+	/*
+	 * MMU needs to be disabled because both BL2 and BL32 execute
+	 * in PL1, and therefore share the same address space.
+	 * BL32 will initialize the address space according to its
+	 * own requirement.
+	 */
+	bl	disable_mmu_icache_secure
+	stcopr	r0, TLBIALL
+	dsb	sy
+	isb
+	mov	r0, r8
+	bl	bl2_el3_plat_prepare_exit
+
+	/*
+	 * Extract PC and SPSR based on struct `entry_point_info_t`
+	 * and load it in LR and SPSR registers respectively.
+	 */
+	ldr	lr, [r8, #ENTRY_POINT_INFO_PC_OFFSET]
+	ldr	r1, [r8, #(ENTRY_POINT_INFO_PC_OFFSET + 4)]
+	msr	spsr_xc, r1
+
+	/* Some BL32 stages expect lr_svc to provide the BL33 entry address */
+	cps	#MODE32_svc
+	ldr	lr, [r8, #ENTRY_POINT_INFO_LR_SVC_OFFSET]
+	cps	#MODE32_mon
+
+	add	r8, r8, #ENTRY_POINT_INFO_ARGS_OFFSET
+	ldm	r8, {r0, r1, r2, r3}
+	exception_return
+endfunc bl2_run_next_image
diff --git a/bl2/aarch64/bl2_el3_entrypoint.S b/bl2/aarch64/bl2_el3_entrypoint.S
index 4eab39c..45bac7d 100644
--- a/bl2/aarch64/bl2_el3_entrypoint.S
+++ b/bl2/aarch64/bl2_el3_entrypoint.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2017-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2017-2021, Arm Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -12,8 +12,6 @@
 #include <el3_common_macros.S>
 
 	.globl	bl2_entrypoint
-	.globl	bl2_el3_run_image
-	.globl	bl2_run_next_image
 
 #if BL2_IN_XIP_MEM
 #define FIXUP_SIZE	0
@@ -72,36 +70,3 @@
 	 */
 	no_ret	plat_panic_handler
 endfunc bl2_entrypoint
-
-func bl2_run_next_image
-	mov	x20,x0
-	/* ---------------------------------------------
-	 * MMU needs to be disabled because both BL2 and BL31 execute
-	 * in EL3, and therefore share the same address space.
-	 * BL31 will initialize the address space according to its
-	 * own requirement.
-	 * ---------------------------------------------
-	 */
-	bl	disable_mmu_icache_el3
-	tlbi	alle3
-	bl	bl2_el3_plat_prepare_exit
-
-#if ENABLE_PAUTH
-	/* ---------------------------------------------
-	 * Disable pointer authentication before jumping
-	 * to next boot image.
-	 * ---------------------------------------------
-	 */
-	bl	pauth_disable_el3
-#endif /* ENABLE_PAUTH */
-
-	ldp	x0, x1, [x20, #ENTRY_POINT_INFO_PC_OFFSET]
-	msr	elr_el3, x0
-	msr	spsr_el3, x1
-
-	ldp	x6, x7, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x30)]
-	ldp	x4, x5, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x20)]
-	ldp	x2, x3, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x10)]
-	ldp	x0, x1, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x0)]
-	exception_return
-endfunc bl2_run_next_image
diff --git a/bl2/aarch64/bl2_rme_entrypoint.S b/bl2/aarch64/bl2_rme_entrypoint.S
new file mode 100644
index 0000000..076e326
--- /dev/null
+++ b/bl2/aarch64/bl2_rme_entrypoint.S
@@ -0,0 +1,67 @@
+/*
+ * Copyright (c) 2021, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <platform_def.h>
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <common/bl_common.h>
+#include <el3_common_macros.S>
+
+	.globl	bl2_entrypoint
+
+
+func bl2_entrypoint
+	/* Save arguments x0-x3 from previous Boot loader */
+	mov	x20, x0
+	mov	x21, x1
+	mov	x22, x2
+	mov	x23, x3
+
+	el3_entrypoint_common                                   \
+		_init_sctlr=0                                   \
+		_warm_boot_mailbox=0                            \
+		_secondary_cold_boot=0                          \
+		_init_memory=0                                  \
+		_init_c_runtime=1                               \
+		_exception_vectors=bl2_el3_exceptions           \
+		_pie_fixup_size=0
+
+	/* ---------------------------------------------
+	 * Restore parameters of boot rom
+	 * ---------------------------------------------
+	 */
+	mov	x0, x20
+	mov	x1, x21
+	mov	x2, x22
+	mov	x3, x23
+
+	/* ---------------------------------------------
+	 * Perform BL2 setup
+	 * ---------------------------------------------
+	 */
+	bl	bl2_setup
+
+#if ENABLE_PAUTH
+	/* ---------------------------------------------
+	 * Program APIAKey_EL1 and enable pointer authentication.
+	 * ---------------------------------------------
+	 */
+	bl	pauth_init_enable_el3
+#endif /* ENABLE_PAUTH */
+
+	/* ---------------------------------------------
+	 * Jump to main function.
+	 * ---------------------------------------------
+	 */
+	bl	bl2_main
+
+	/* ---------------------------------------------
+	 * Should never reach this point.
+	 * ---------------------------------------------
+	 */
+	no_ret	plat_panic_handler
+endfunc bl2_entrypoint
diff --git a/bl2/aarch64/bl2_run_next_image.S b/bl2/aarch64/bl2_run_next_image.S
new file mode 100644
index 0000000..f0a8be8
--- /dev/null
+++ b/bl2/aarch64/bl2_run_next_image.S
@@ -0,0 +1,45 @@
+/*
+ * Copyright (c) 2021, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <common/bl_common.h>
+
+	.globl	bl2_run_next_image
+
+
+func bl2_run_next_image
+	mov	x20,x0
+	/* ---------------------------------------------
+	 * MMU needs to be disabled because both BL2 and BL31 execute
+	 * in EL3, and therefore share the same address space.
+	 * BL31 will initialize the address space according to its
+	 * own requirement.
+	 * ---------------------------------------------
+	 */
+	bl	disable_mmu_icache_el3
+	tlbi	alle3
+	bl	bl2_el3_plat_prepare_exit
+
+#if ENABLE_PAUTH
+	/* ---------------------------------------------
+	 * Disable pointer authentication before jumping
+	 * to next boot image.
+	 * ---------------------------------------------
+	 */
+	bl	pauth_disable_el3
+#endif /* ENABLE_PAUTH */
+
+	ldp	x0, x1, [x20, #ENTRY_POINT_INFO_PC_OFFSET]
+	msr	elr_el3, x0
+	msr	spsr_el3, x1
+
+	ldp	x6, x7, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x30)]
+	ldp	x4, x5, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x20)]
+	ldp	x2, x3, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x10)]
+	ldp	x0, x1, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x0)]
+	exception_return
+endfunc bl2_run_next_image
diff --git a/bl2/bl2.ld.S b/bl2/bl2.ld.S
index 37849c3..d332ec0 100644
--- a/bl2/bl2.ld.S
+++ b/bl2/bl2.ld.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2021, Arm Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -25,7 +25,11 @@
 #if SEPARATE_CODE_AND_RODATA
     .text . : {
         __TEXT_START__ = .;
+#if ENABLE_RME
+        *bl2_rme_entrypoint.o(.text*)
+#else /* ENABLE_RME */
         *bl2_entrypoint.o(.text*)
+#endif /* ENABLE_RME */
         *(SORT_BY_ALIGNMENT(.text*))
         *(.vectors)
         . = ALIGN(PAGE_SIZE);
diff --git a/bl2/bl2.mk b/bl2/bl2.mk
index 735e7e0..54c73f5 100644
--- a/bl2/bl2.mk
+++ b/bl2/bl2.mk
@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2013-2020, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2013-2021, Arm Limited and Contributors. All rights reserved.
 #
 # SPDX-License-Identifier: BSD-3-Clause
 #
@@ -15,13 +15,24 @@
 BL2_SOURCES		+=	common/aarch64/early_exceptions.S
 endif
 
-ifeq (${BL2_AT_EL3},0)
+ifeq (${ENABLE_RME},1)
+# Using RME, run BL2 at EL3
+BL2_SOURCES		+=      bl2/${ARCH}/bl2_rme_entrypoint.S	\
+				bl2/${ARCH}/bl2_el3_exceptions.S	\
+				bl2/${ARCH}/bl2_run_next_image.S	\
+
+BL2_LINKERFILE		:=	bl2/bl2.ld.S
+
+else ifeq (${BL2_AT_EL3},0)
+# Normal operation, no RME, no BL2 at EL3
 BL2_SOURCES		+=	bl2/${ARCH}/bl2_entrypoint.S
 BL2_LINKERFILE		:=	bl2/bl2.ld.S
 
 else
+# BL2 at EL3, no RME
 BL2_SOURCES		+=	bl2/${ARCH}/bl2_el3_entrypoint.S	\
 				bl2/${ARCH}/bl2_el3_exceptions.S	\
+				bl2/${ARCH}/bl2_run_next_image.S        \
 				lib/cpus/${ARCH}/cpu_helpers.S		\
 				lib/cpus/errata_report.c
 
diff --git a/bl2/bl2_main.c b/bl2/bl2_main.c
index d2de135..197c057 100644
--- a/bl2/bl2_main.c
+++ b/bl2/bl2_main.c
@@ -29,31 +29,9 @@
 #define NEXT_IMAGE	"BL32"
 #endif
 
-#if !BL2_AT_EL3
+#if BL2_AT_EL3
 /*******************************************************************************
- * Setup function for BL2.
- ******************************************************************************/
-void bl2_setup(u_register_t arg0, u_register_t arg1, u_register_t arg2,
-	       u_register_t arg3)
-{
-	/* Perform early platform-specific setup */
-	bl2_early_platform_setup2(arg0, arg1, arg2, arg3);
-
-	/* Perform late platform-specific setup */
-	bl2_plat_arch_setup();
-
-#if CTX_INCLUDE_PAUTH_REGS
-	/*
-	 * Assert that the ARMv8.3-PAuth registers are present or an access
-	 * fault will be triggered when they are being saved or restored.
-	 */
-	assert(is_armv8_3_pauth_present());
-#endif /* CTX_INCLUDE_PAUTH_REGS */
-}
-
-#else /* if BL2_AT_EL3 */
-/*******************************************************************************
- * Setup function for BL2 when BL2_AT_EL3=1.
+ * Setup function for BL2 when BL2_AT_EL3=1
  ******************************************************************************/
 void bl2_el3_setup(u_register_t arg0, u_register_t arg1, u_register_t arg2,
 		   u_register_t arg3)
@@ -72,6 +50,27 @@
 	assert(is_armv8_3_pauth_present());
 #endif /* CTX_INCLUDE_PAUTH_REGS */
 }
+#else /* BL2_AT_EL3 */
+/*******************************************************************************
+ * Setup function for BL2 when BL2_AT_EL3=0
+ ******************************************************************************/
+void bl2_setup(u_register_t arg0, u_register_t arg1, u_register_t arg2,
+	       u_register_t arg3)
+{
+	/* Perform early platform-specific setup */
+	bl2_early_platform_setup2(arg0, arg1, arg2, arg3);
+
+	/* Perform late platform-specific setup */
+	bl2_plat_arch_setup();
+
+#if CTX_INCLUDE_PAUTH_REGS
+	/*
+	 * Assert that the ARMv8.3-PAuth registers are present or an access
+	 * fault will be triggered when they are being saved or restored.
+	 */
+	assert(is_armv8_3_pauth_present());
+#endif /* CTX_INCLUDE_PAUTH_REGS */
+}
 #endif /* BL2_AT_EL3 */
 
 /*******************************************************************************
@@ -115,7 +114,7 @@
 	measured_boot_finish();
 #endif /* MEASURED_BOOT */
 
-#if !BL2_AT_EL3
+#if !BL2_AT_EL3 && !ENABLE_RME
 #ifndef __aarch64__
 	/*
 	 * For AArch32 state BL1 and BL2 share the MMU setup.
@@ -140,7 +139,7 @@
 	 * be passed to next BL image as an argument.
 	 */
 	smc(BL1_SMC_RUN_IMAGE, (unsigned long)next_bl_ep_info, 0, 0, 0, 0, 0, 0);
-#else /* if BL2_AT_EL3 */
+#else /* if BL2_AT_EL3 || ENABLE_RME */
 	NOTICE("BL2: Booting " NEXT_IMAGE "\n");
 	print_entry_point_info(next_bl_ep_info);
 	console_flush();
@@ -153,5 +152,5 @@
 #endif /* ENABLE_PAUTH */
 
 	bl2_run_next_image(next_bl_ep_info);
-#endif /* BL2_AT_EL3 */
+#endif /* BL2_AT_EL3 && ENABLE_RME */
 }
diff --git a/include/arch/aarch64/el3_common_macros.S b/include/arch/aarch64/el3_common_macros.S
index d496584..7d6a963 100644
--- a/include/arch/aarch64/el3_common_macros.S
+++ b/include/arch/aarch64/el3_common_macros.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2021, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2021, Arm Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -88,6 +88,13 @@
 	 */
 	orr	x0, x0, #(SCR_API_BIT | SCR_APK_BIT)
 #endif
+#if ENABLE_RME
+	/*
+	 * TODO: Settting the EEL2 bit to allow EL3 access to secure only registers
+	 * in context management. This will need to be refactored.
+	 */
+	orr	x0, x0, #SCR_EEL2_BIT
+#endif
 	msr	scr_el3, x0
 
 	/* ---------------------------------------------------------------------
@@ -365,6 +372,7 @@
 	msr	vbar_el3, x0
 	isb
 
+#if !(defined(IMAGE_BL2) && ENABLE_RME)
 	/* ---------------------------------------------------------------------
 	 * It is a cold boot.
 	 * Perform any processor specific actions upon reset e.g. cache, TLB
@@ -372,6 +380,7 @@
 	 * ---------------------------------------------------------------------
 	 */
 	bl	reset_handler
+#endif
 
 	el3_arch_init_common
 
@@ -414,7 +423,8 @@
 	 * ---------------------------------------------------------------------
 	 */
 	.if \_init_c_runtime
-#if defined(IMAGE_BL31) || (defined(IMAGE_BL2) && BL2_AT_EL3 && BL2_INV_DCACHE)
+#if defined(IMAGE_BL31) || (defined(IMAGE_BL2) && \
+	((BL2_AT_EL3 && BL2_INV_DCACHE) || ENABLE_RME))
 		/* -------------------------------------------------------------
 		 * Invalidate the RW memory used by the BL31 image. This
 		 * includes the data and NOBITS sections. This is done to
diff --git a/lib/aarch64/misc_helpers.S b/lib/aarch64/misc_helpers.S
index cc5c575..6e4d1fc 100644
--- a/lib/aarch64/misc_helpers.S
+++ b/lib/aarch64/misc_helpers.S
@@ -163,7 +163,8 @@
 	 * Check for M bit (MMU enabled) of the current SCTLR_EL(1|3)
 	 * register value and panic if the MMU is disabled.
 	 */
-#if defined(IMAGE_BL1) || defined(IMAGE_BL31) || (defined(IMAGE_BL2) && BL2_AT_EL3)
+#if defined(IMAGE_BL1) || defined(IMAGE_BL31) || (defined(IMAGE_BL2) && \
+	(BL2_AT_EL3 || ENABLE_RME))
 	mrs	tmp1, sctlr_el3
 #else
 	mrs	tmp1, sctlr_el1