rcar-gen3: initial commit for the rcar-gen3 boards
Reference code:
==============
rar_gen3: IPL and Secure Monitor Rev1.0.22
https://github.com/renesas-rcar/arm-trusted-firmware [rcar_gen3]
Author: Takuya Sakata <takuya.sakata.wz@bp.renesas.com>
Date: Thu Aug 30 21:26:41 2018 +0900
Update IPL and Secure Monitor Rev1.0.22
General Information:
===================
This port has been tested on the Salvator-X Soc_id r8a7795 revision
ES1.1 (uses an SPD).
Build Tested:
-------------
ATFW_OPT="LSI=H3 RCAR_DRAM_SPLIT=1 RCAR_LOSSY_ENABLE=1"
MBEDTLS_DIR=$mbedtls
$ make clean bl2 bl31 rcar PLAT=rcar ${ATFW_OPT} SPD=opteed
Other dependencies:
------------------
* mbed_tls:
git@github.com:ARMmbed/mbedtls.git [devel]
Merge: 68dbc94 f34a4c1
Author: Simon Butcher <simon.butcher@arm.com>
Date: Thu Aug 30 00:57:28 2018 +0100
* optee_os:
https://github.com/BayLibre/optee_os
Until it gets merged into OP-TEE, the port requires Renesas' Trusted
Environment with a modification to support power management.
Author: Jorge Ramirez-Ortiz <jramirez@baylibre.com>
Date: Thu Aug 30 16:49:49 2018 +0200
plat-rcar: cpu-suspend: handle the power level
Signed-off-by: Jorge Ramirez-Ortiz <jramirez@baylibre.com>
* u-boot:
The port has beent tested using mainline uboot.
Author: Fabio Estevam <festevam@gmail.com>
Date: Tue Sep 4 10:23:12 2018 -0300
*linux:
The port has beent tested using mainline kernel.
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sun Sep 16 11:52:37 2018 -0700
Linux 4.19-rc4
Overview
---------
BOOTROM starts the cpu at EL3; In this port BL2 will therefore be entered
at this exception level (the Renesas' ATF reference tree [1] resets into
EL1 before entering BL2 - see its bl2.ld.S)
BL2 initializes DDR (and i2c to talk to the PMIC on some platforms)
before determining the boot reason (cold or warm).
During suspend all CPUs are switched off and the DDR is put in
backup mode (some kind of self-refresh mode). This means that BL2 is
always entered in a cold boot scenario.
Once BL2 boots, it determines the boot reason, writes it to shared
memory (BOOT_KIND_BASE) together with the BL31 parameters
(PARAMS_BASE) and jumps to BL31.
To all effects, BL31 is as if it is being entered in reset mode since
it still needs to initialize the rest of the cores; this is the reason
behind using direct shared memory access to BOOT_KIND_BASE and
PARAMS_BASE instead of using registers to get to those locations (see
el3_common_macros.S and bl31_entrypoint.S for the RESET_TO_BL31 use
case).
Depending on the boot reason BL31 initializes the rest of the cores:
in case of suspend, it uses a MBOX memory region to recover the
program counters.
[1] https://github.com/renesas-rcar/arm-trusted-firmware
Tests
-----
* cpuidle
-------
enable kernel's cpuidle arm_idle driver and boot
* system suspend
--------------
$ cat suspend.sh
#!/bin/bash
i2cset -f -y 7 0x30 0x20 0x0F
read -p "Switch off SW23 and press return " foo
echo mem > /sys/power/state
* cpu hotplug:
------------
$ cat offline.sh
#!/bin/bash
nbr=$1
echo 0 > /sys/devices/system/cpu/cpu$nbr/online
printf "ONLINE: " && cat /sys/devices/system/cpu/online
printf "OFFLINE: " && cat /sys/devices/system/cpu/offline
$ cat online.sh
#!/bin/bash
nbr=$1
echo 1 > /sys/devices/system/cpu/cpu$nbr/online
printf "ONLINE: " && cat /sys/devices/system/cpu/online
printf "OFFLINE: " && cat /sys/devices/system/cpu/offline
Signed-off-by: ldts <jramirez@baylibre.com>
diff --git a/plat/renesas/rcar/include/plat.ld.S b/plat/renesas/rcar/include/plat.ld.S
new file mode 100644
index 0000000..90c132d
--- /dev/null
+++ b/plat/renesas/rcar/include/plat.ld.S
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef __RCAR_PLAT_LD_S__
+#define __RCAR_PLAT_LD_S__
+
+#include <platform_def.h>
+#include <xlat_tables_defs.h>
+
+MEMORY {
+ SRAM (rwx): ORIGIN = BL31_SRAM_BASE, LENGTH = DEVICE_SRAM_SIZE
+ PRAM (r): ORIGIN = BL31_LIMIT - DEVICE_SRAM_SIZE, LENGTH = DEVICE_SRAM_SIZE
+}
+
+SECTIONS
+{
+ /* SRAM_COPY is in PRAM */
+ . = BL31_LIMIT - DEVICE_SRAM_SIZE;
+ __SRAM_COPY_START__ = .;
+
+ .system_ram : {
+ /* system ram start is in SRAM */
+ __system_ram_start__ = .;
+ *(.system_ram*)
+ *iic_dvfs.o(.rodata)
+ __system_ram_end__ = .;
+ } >SRAM AT>PRAM
+
+ ASSERT(__BL31_END__ <= BL31_LIMIT - DEVICE_SRAM_SIZE,
+ "BL31 image too large - writing on top of SRAM!")
+
+}
+
+#endif /* __RCAR_PLAT_LD_S__ */
diff --git a/plat/renesas/rcar/include/plat_macros.S b/plat/renesas/rcar/include/plat_macros.S
new file mode 100644
index 0000000..eb10928
--- /dev/null
+++ b/plat/renesas/rcar/include/plat_macros.S
@@ -0,0 +1,87 @@
+/*
+ * Copyright (c) 2015-2017, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <cci.h>
+#include <gic_common.h>
+#include <gicv2.h>
+#include "rcar_def.h"
+
+.section .rodata.gic_reg_name, "aS"
+gicc_regs:
+ .asciz "gicc_hppir", "gicc_ahppir", "gicc_ctlr", ""
+gicd_pend_reg:
+ .asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n Offset:\t\t\tvalue\n"
+newline:
+ .asciz "\n"
+spacer:
+ .asciz ":\t\t0x"
+
+ /* ---------------------------------------------
+ * The below macro prints out relevant GIC
+ * registers whenever an unhandled exception is
+ * taken in BL3-1.
+ * Clobbers: x0 - x10, x16, x17, sp
+ * ---------------------------------------------
+ */
+ .macro plat_print_gic_regs
+ mov_imm x17, RCAR_GICC_BASE
+ mov_imm x16, RCAR_GICD_BASE
+print_gicc_regs:
+ /* gicc base address is now in x17 */
+ adr x6, gicc_regs /* Load the gicc reg list to x6 */
+ /* Load the gicc regs to gp regs used by str_in_crash_buf_print */
+ ldr w8, [x17, #GICC_HPPIR]
+ ldr w9, [x17, #GICC_AHPPIR]
+ ldr w10, [x17, #GICC_CTLR]
+ /* Store to the crash buf and print to console */
+ bl str_in_crash_buf_print
+
+ /* Print the GICD_ISPENDR regs */
+ add x7, x16, #GICD_ISPENDR
+ adr x4, gicd_pend_reg
+ bl asm_print_str
+gicd_ispendr_loop:
+ sub x4, x7, x16
+ cmp x4, #0x280
+ b.eq exit_print_gic_regs
+ bl asm_print_hex
+ adr x4, spacer
+ bl asm_print_str
+ ldr x4, [x7], #8
+ bl asm_print_hex
+ adr x4, newline
+ bl asm_print_str
+ b gicd_ispendr_loop
+exit_print_gic_regs:
+ .endm
+
+.section .rodata.cci_reg_name, "aS"
+cci_iface_regs:
+ .asciz "cci_snoop_ctrl_cluster0", "cci_snoop_ctrl_cluster1" , ""
+
+ /* ------------------------------------------------
+ * The below macro prints out relevant interconnect
+ * registers whenever an unhandled exception is
+ * taken in BL3-1.
+ * Clobbers: x0 - x9, sp
+ * ------------------------------------------------
+ */
+ .macro plat_print_interconnect_regs
+ adr x6, cci_iface_regs
+ /* Store in x7 the base address of the first interface */
+ mov_imm x7, (CCI500_BASE + SLAVE_IFACE3_OFFSET)
+ ldr w8, [x7, #SNOOP_CTRL_REG]
+ /* Store in x7 the base address of the second interface */
+ mov_imm x7, (CCI500_BASE + SLAVE_IFACE4_OFFSET)
+ ldr w9, [x7, #SNOOP_CTRL_REG]
+ /* Store to the crash buf and print to console */
+ bl str_in_crash_buf_print
+ .endm
+
+ .macro plat_crash_print_regs
+ plat_print_gic_regs
+ plat_print_interconnect_regs
+ .endm
diff --git a/plat/renesas/rcar/include/platform_def.h b/plat/renesas/rcar/include/platform_def.h
new file mode 100644
index 0000000..d38eebc
--- /dev/null
+++ b/plat/renesas/rcar/include/platform_def.h
@@ -0,0 +1,189 @@
+/*
+ * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLATFORM_DEF_H__
+#define PLATFORM_DEF_H__
+
+#include <arch.h>
+#ifndef __ASSEMBLY__
+#include <stdlib.h>
+#endif
+#include "rcar_def.h"
+
+/*******************************************************************************
+ * Platform binary types for linking
+ ******************************************************************************/
+#define PLATFORM_LINKER_FORMAT "elf64-littleaarch64"
+#define PLATFORM_LINKER_ARCH aarch64
+
+/*******************************************************************************
+ * Generic platform constants
+ ******************************************************************************/
+ #define FIRMWARE_WELCOME_STR "Booting Rcar-gen3 Trusted Firmware\n"
+
+/* Size of cacheable stacks */
+#if IMAGE_BL1
+#if TRUSTED_BOARD_BOOT
+#define PLATFORM_STACK_SIZE U(0x1000)
+#else
+#define PLATFORM_STACK_SIZE U(0x440)
+#endif
+#elif IMAGE_BL2
+#if TRUSTED_BOARD_BOOT
+#define PLATFORM_STACK_SIZE U(0x1000)
+#else
+#define PLATFORM_STACK_SIZE U(0x400)
+#endif
+#elif IMAGE_BL31
+#define PLATFORM_STACK_SIZE U(0x400)
+#elif IMAGE_BL32
+#define PLATFORM_STACK_SIZE U(0x440)
+#endif
+
+#define BL332_IMAGE_ID (NS_BL2U_IMAGE_ID + 1)
+#define BL333_IMAGE_ID (NS_BL2U_IMAGE_ID + 2)
+#define BL334_IMAGE_ID (NS_BL2U_IMAGE_ID + 3)
+#define BL335_IMAGE_ID (NS_BL2U_IMAGE_ID + 4)
+#define BL336_IMAGE_ID (NS_BL2U_IMAGE_ID + 5)
+#define BL337_IMAGE_ID (NS_BL2U_IMAGE_ID + 6)
+#define BL338_IMAGE_ID (NS_BL2U_IMAGE_ID + 7)
+
+#define BL332_KEY_CERT_ID (NS_BL2U_IMAGE_ID + 8)
+#define BL333_KEY_CERT_ID (NS_BL2U_IMAGE_ID + 9)
+#define BL334_KEY_CERT_ID (NS_BL2U_IMAGE_ID + 10)
+#define BL335_KEY_CERT_ID (NS_BL2U_IMAGE_ID + 11)
+#define BL336_KEY_CERT_ID (NS_BL2U_IMAGE_ID + 12)
+#define BL337_KEY_CERT_ID (NS_BL2U_IMAGE_ID + 13)
+#define BL338_KEY_CERT_ID (NS_BL2U_IMAGE_ID + 14)
+
+#define BL332_CERT_ID (NS_BL2U_IMAGE_ID + 15)
+#define BL333_CERT_ID (NS_BL2U_IMAGE_ID + 16)
+#define BL334_CERT_ID (NS_BL2U_IMAGE_ID + 17)
+#define BL335_CERT_ID (NS_BL2U_IMAGE_ID + 18)
+#define BL336_CERT_ID (NS_BL2U_IMAGE_ID + 19)
+#define BL337_CERT_ID (NS_BL2U_IMAGE_ID + 20)
+#define BL338_CERT_ID (NS_BL2U_IMAGE_ID + 21)
+
+/* io drivers id */
+#define FLASH_DEV_ID U(0)
+#define EMMC_DEV_ID U(1)
+
+/*
+ * R-Car H3 Cortex-A57
+ * L1:I/48KB(16KBx3way) D/32KB(16KBx2way) L2:2MB(128KBx16way)
+ * Cortex-A53
+ * L1:I/32KB(16KBx2way) D/32KB(8KBx4way) L2:512KB(32KBx16way)
+ */
+#define PLATFORM_CACHE_LINE_SIZE 128
+#define PLATFORM_CLUSTER_COUNT U(2)
+#define PLATFORM_CLUSTER0_CORE_COUNT U(4)
+#define PLATFORM_CLUSTER1_CORE_COUNT U(4)
+#define PLATFORM_CORE_COUNT (PLATFORM_CLUSTER1_CORE_COUNT + \
+ PLATFORM_CLUSTER0_CORE_COUNT)
+#define PLATFORM_MAX_CPUS_PER_CLUSTER U(4)
+
+#define PLAT_MAX_PWR_LVL MPIDR_AFFLVL2
+#define PLAT_NUM_PWR_DOMAINS (PLATFORM_CORE_COUNT + \
+ PLATFORM_CLUSTER_COUNT + 1)
+
+#define PLAT_MAX_RET_STATE U(1)
+#define PLAT_MAX_OFF_STATE U(2)
+
+#define MAX_IO_DEVICES U(3)
+#define MAX_IO_HANDLES U(4)
+
+/*******************************************************************************
+ * BL2 specific defines.
+ ******************************************************************************/
+/* Put BL2 just below BL3-1. BL2_BASE is calculated using the current BL2 debug
+ * size plus a little space for growth. */
+#define RCAR_SYSRAM_BASE U(0xE6300000)
+#if RCAR_LSI == RCAR_E3
+#define RCAR_SYSRAM_LIMIT U(0xE6320000)
+#else
+#define RCAR_SYSRAM_LIMIT U(0xE6360000)
+#endif
+
+#define BL2_BASE U(0xE6304000)
+#if RCAR_LSI == RCAR_E3
+#define BL2_LIMIT U(0xE6318000)
+#else
+#define BL2_LIMIT U(0xE632E800)
+#endif
+#define RCAR_SYSRAM_SIZE (BL2_BASE - RCAR_SYSRAM_BASE)
+
+/*******************************************************************************
+ * BL31 specific defines.
+ ******************************************************************************/
+/* Put BL3-1 at the top of the Trusted SRAM. BL31_BASE is calculated using the
+ * current BL3-1 debug size plus a little space for growth. */
+#define BL31_BASE (RCAR_TRUSTED_SRAM_BASE)
+#define BL31_LIMIT (RCAR_TRUSTED_SRAM_BASE + \
+ RCAR_TRUSTED_SRAM_SIZE)
+#define RCAR_BL31_LOG_BASE (0x44040000)
+#define RCAR_BL31_SDRAM_BTM (RCAR_BL31_LOG_BASE + 0x14000)
+#define RCAR_BL31_LOG_SIZE (RCAR_BL31_SDRAM_BTM - RCAR_BL31_LOG_BASE)
+#define BL31_SRAM_BASE (DEVICE_SRAM_BASE)
+#define BL31_SRAM_LIMIT (DEVICE_SRAM_BASE + DEVICE_SRAM_SIZE)
+
+/*******************************************************************************
+ * BL32 specific defines.
+ ******************************************************************************/
+#ifndef SPD_NONE
+#define BL32_BASE U(0x44100000)
+#define BL32_LIMIT (BL32_BASE + U(0x100000))
+#endif
+
+/*******************************************************************************
+ * BL33
+ ******************************************************************************/
+#define BL33_BASE DRAM1_NS_BASE
+
+
+/*******************************************************************************
+ * Platform specific page table and MMU setup constants
+ ******************************************************************************/
+#if IMAGE_BL1
+#define MAX_XLAT_TABLES U(2)
+#elif IMAGE_BL2
+#define MAX_XLAT_TABLES U(5)
+#elif IMAGE_BL31
+#define MAX_XLAT_TABLES U(4)
+#elif IMAGE_BL32
+#define MAX_XLAT_TABLES U(3)
+#endif
+
+#if IMAGE_BL2
+#define PLAT_PHY_ADDR_SPACE_SIZE (ULL(1) << 40)
+#define PLAT_VIRT_ADDR_SPACE_SIZE (ULL(1) << 40)
+#else
+#define PLAT_PHY_ADDR_SPACE_SIZE (ULL(1) << 32)
+#define PLAT_VIRT_ADDR_SPACE_SIZE (ULL(1) << 32)
+#endif
+
+#define MAX_MMAP_REGIONS (RCAR_MMAP_ENTRIES + RCAR_BL_REGIONS)
+
+/*******************************************************************************
+ * Declarations and constants to access the mailboxes safely. Each mailbox is
+ * aligned on the biggest cache line size in the platform. This is known only
+ * to the platform as it might have a combination of integrated and external
+ * caches. Such alignment ensures that two maiboxes do not sit on the same cache
+ * line at any cache level. They could belong to different cpus/clusters &
+ * get written while being protected by different locks causing corruption of
+ * a valid mailbox address.
+ ******************************************************************************/
+#define CACHE_WRITEBACK_SHIFT (6)
+#define CACHE_WRITEBACK_GRANULE (1 << CACHE_WRITEBACK_SHIFT)
+
+/*******************************************************************************
+ * Size of the per-cpu data in bytes that should be reserved in the generic
+ * per-cpu data structure for the RCAR port.
+ ******************************************************************************/
+#if !USE_COHERENT_MEM
+#define PLAT_PCPU_DATA_SIZE (2)
+#endif
+
+#endif
diff --git a/plat/renesas/rcar/include/rcar_def.h b/plat/renesas/rcar/include/rcar_def.h
new file mode 100644
index 0000000..eb195b4
--- /dev/null
+++ b/plat/renesas/rcar/include/rcar_def.h
@@ -0,0 +1,293 @@
+/*
+ * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef RCAR_DEF_H__
+#define RCAR_DEF_H__
+
+#include <tbbr_img_def.h>
+#include <utils_def.h>
+
+#define RCAR_PRIMARY_CPU 0x0
+#define RCAR_TRUSTED_SRAM_BASE 0x44000000
+#define RCAR_TRUSTED_SRAM_SIZE 0x0003E000
+#define RCAR_SHARED_MEM_BASE (RCAR_TRUSTED_SRAM_BASE + \
+ RCAR_TRUSTED_SRAM_SIZE)
+#define RCAR_SHARED_MEM_SIZE U(0x00001000)
+#define FLASH0_BASE U(0x08000000)
+#define FLASH0_SIZE U(0x04000000)
+#define FLASH_MEMORY_SIZE U(0x04000000) /* hyper flash */
+#define FLASH_TRANS_SIZE_UNIT U(0x00000100)
+#define DEVICE_RCAR_BASE U(0xE6000000)
+#define DEVICE_RCAR_SIZE U(0x00300000)
+#define DEVICE_RCAR_BASE2 U(0xE6360000)
+#define DEVICE_RCAR_SIZE2 U(0x19CA0000)
+#define DEVICE_SRAM_BASE U(0xE6310000)
+#define DEVICE_SRAM_SIZE U(0x00002000)
+#define DEVICE_SRAM_STACK_BASE (DEVICE_SRAM_BASE + DEVICE_SRAM_SIZE)
+#define DEVICE_SRAM_STACK_SIZE U(0x00001000)
+#define DRAM_LIMIT ULL(0x0000010000000000)
+#define DRAM1_BASE U(0x40000000)
+#define DRAM1_SIZE U(0x80000000)
+#define DRAM1_NS_BASE (DRAM1_BASE + U(0x10000000))
+#define DRAM1_NS_SIZE (DRAM1_SIZE - DRAM1_NS_BASE)
+#define DRAM_40BIT_BASE ULL(0x0400000000)
+#define DRAM_40BIT_SIZE ULL(0x0400000000)
+#define DRAM_PROTECTED_BASE ULL(0x43F00000)
+#define DRAM_40BIT_PROTECTED_BASE ULL(0x0403F00000)
+#define DRAM_PROTECTED_SIZE ULL(0x03F00000)
+#define RCAR_BL31_CRASH_BASE U(0x4403F000)
+#define RCAR_BL31_CRASH_SIZE U(0x00001000)
+/* Entrypoint mailboxes */
+#define MBOX_BASE RCAR_SHARED_MEM_BASE
+#define MBOX_SIZE 0x200
+/* Base address where parameters to BL31 are stored */
+#define PARAMS_BASE (MBOX_BASE + MBOX_SIZE)
+#define BOOT_KIND_BASE (RCAR_SHARED_MEM_BASE + \
+ RCAR_SHARED_MEM_SIZE - 0x100)
+/* The number of regions like RO(code), coherent and data required by
+ * different BL stages which need to be mapped in the MMU */
+#if USE_COHERENT_MEM
+#define RCAR_BL_REGIONS (3)
+#else
+#define RCAR_BL_REGIONS (2)
+#endif
+/* The RCAR_MAX_MMAP_REGIONS depend on the number of entries in rcar_mmap[]
+ * defined for each BL stage in rcar_common.c. */
+#if IMAGE_BL2
+#define RCAR_MMAP_ENTRIES (9)
+#endif
+#if IMAGE_BL31
+#define RCAR_MMAP_ENTRIES (9)
+#endif
+#if IMAGE_BL2
+#define REG1_BASE U(0xE6400000)
+#define REG1_SIZE U(0x04C00000)
+#define ROM0_BASE U(0xEB100000)
+#define ROM0_SIZE U(0x00028000)
+#define REG2_BASE U(0xEC000000)
+#define REG2_SIZE U(0x14000000)
+#endif
+/* BL33 */
+#define NS_IMAGE_OFFSET (DRAM1_BASE + U(0x09000000))
+/* BL31 */
+#define RCAR_DEVICE_BASE DEVICE_RCAR_BASE
+#define RCAR_DEVICE_SIZE (0x1A000000)
+#define RCAR_LOG_RES_SIZE (512/8)
+#define RCAR_LOG_HEADER_SIZE (16)
+#define RCAR_LOG_OTHER_SIZE (RCAR_LOG_HEADER_SIZE + \
+ RCAR_LOG_RES_SIZE)
+#define RCAR_BL31_LOG_MAX (RCAR_BL31_LOG_SIZE - \
+ RCAR_LOG_OTHER_SIZE)
+#define RCAR_CRASH_STACK RCAR_BL31_CRASH_BASE
+#define AARCH64_SPACE_BASE ULL(0x00000000000)
+#define AARCH64_SPACE_SIZE ULL(0x10000000000)
+/* CCI related constants */
+#define CCI500_BASE U(0xF1200000)
+#define CCI500_CLUSTER0_SL_IFACE_IX (2)
+#define CCI500_CLUSTER1_SL_IFACE_IX (3)
+#define CCI500_CLUSTER0_SL_IFACE_IX_FOR_M3 (1)
+#define CCI500_CLUSTER1_SL_IFACE_IX_FOR_M3 (2)
+#define RCAR_CCI_BASE CCI500_BASE
+/* GIC */
+#define RCAR_GICD_BASE U(0xF1010000)
+#define RCAR_GICR_BASE U(0xF1010000)
+#define RCAR_GICC_BASE U(0xF1020000)
+#define RCAR_GICH_BASE U(0xF1040000)
+#define RCAR_GICV_BASE U(0xF1060000)
+#define ARM_IRQ_SEC_PHY_TIMER U(29)
+#define ARM_IRQ_SEC_SGI_0 U(8)
+#define ARM_IRQ_SEC_SGI_1 U(9)
+#define ARM_IRQ_SEC_SGI_2 U(10)
+#define ARM_IRQ_SEC_SGI_3 U(11)
+#define ARM_IRQ_SEC_SGI_4 U(12)
+#define ARM_IRQ_SEC_SGI_5 U(13)
+#define ARM_IRQ_SEC_SGI_6 U(14)
+#define ARM_IRQ_SEC_SGI_7 U(15)
+#define ARM_IRQ_SEC_RPC U(70)
+#define ARM_IRQ_SEC_TIMER U(166)
+#define ARM_IRQ_SEC_TIMER_UP U(171)
+#define ARM_IRQ_SEC_WDT U(173)
+#define ARM_IRQ_SEC_CRYPT U(102)
+#define ARM_IRQ_SEC_CRYPT_SecPKA U(97)
+#define ARM_IRQ_SEC_CRYPT_PubPKA U(98)
+/* Timer control */
+#define RCAR_CNTC_BASE U(0xE6080000)
+/* Reset */
+#define RCAR_CPGWPR U(0xE6150900) /* CPG write protect */
+#define RCAR_MODEMR U(0xE6160060) /* Mode pin */
+#define RCAR_CA57RESCNT U(0xE6160040) /* Reset control A57 */
+#define RCAR_CA53RESCNT U(0xE6160044) /* Reset control A53 */
+#define RCAR_SRESCR U(0xE6160110) /* Soft Power On Reset */
+#define RCAR_CA53WUPCR U(0xE6151010) /* Wake-up control A53 */
+#define RCAR_CA57WUPCR U(0xE6152010) /* Wake-up control A57 */
+#define RCAR_CA53PSTR U(0xE6151040) /* Power status A53 */
+#define RCAR_CA57PSTR U(0xE6152040) /* Power status A57 */
+#define RCAR_CA53CPU0CR U(0xE6151100) /* CPU control A53 */
+#define RCAR_CA57CPU0CR U(0xE6152100) /* CPU control A57 */
+#define RCAR_CA53CPUCMCR U(0xE6151184) /* Common power A53 */
+#define RCAR_CA57CPUCMCR U(0xE6152184) /* Common power A57 */
+#define RCAR_WUPMSKCA57 U(0xE6180014) /* Wake-up mask A57 */
+#define RCAR_WUPMSKCA53 U(0xE6180018) /* Wake-up mask A53 */
+/* SYSC */
+#define RCAR_PWRSR3 U(0xE6180140) /* Power stat A53-SCU */
+#define RCAR_PWRSR5 U(0xE61801C0) /* Power stat A57-SCU */
+#define RCAR_SYSCIER U(0xE618000C) /* Interrupt enable */
+#define RCAR_SYSCIMR U(0xE6180010) /* Interrupt mask */
+#define RCAR_SYSCSR U(0xE6180000) /* SYSC status */
+#define RCAR_PWRONCR3 U(0xE618014C) /* Power resume A53-SCU */
+#define RCAR_PWRONCR5 U(0xE61801CC) /* Power resume A57-SCU */
+#define RCAR_PWROFFCR3 U(0xE6180144) /* Power shutof A53-SCU */
+#define RCAR_PWROFFCR5 U(0xE61801C4) /* Power shutof A57-SCU */
+#define RCAR_PWRER3 U(0xE6180154) /* shutoff/resume error */
+#define RCAR_PWRER5 U(0xE61801D4) /* shutoff/resume error */
+#define RCAR_SYSCISR U(0xE6180004) /* Interrupt status */
+#define RCAR_SYSCISCR U(0xE6180008) /* Interrupt stat clear */
+/* Product register */
+#define RCAR_PRR U(0xFFF00044)
+#define RCAR_PRODUCT_MASK U(0x00007F00)
+#define RCAR_CUT_MASK U(0x000000FF)
+#define RCAR_PRODUCT_H3 U(0x00004F00)
+#define RCAR_PRODUCT_M3 U(0x00005200)
+#define RCAR_PRODUCT_M3N U(0x00005500)
+#define RCAR_PRODUCT_E3 U(0x00005700)
+#define RCAR_CUT_VER10 U(0x00000000)
+#define RCAR_CUT_VER11 U(0x00000001) /* H3/M3N Ver.1.1 */
+#define RCAR_M3_CUT_VER11 U(0x00000010) /* M3 Ver.1.1/Ver.1.2 */
+#define RCAR_CUT_VER20 U(0x00000010)
+#define RCAR_CUT_VER30 U(0x00000020)
+#define RCAR_MAJOR_MASK U(0x000000F0)
+#define RCAR_MINOR_MASK U(0x0000000F)
+#define RCAR_PRODUCT_SHIFT U(8)
+#define RCAR_MAJOR_SHIFT U(4)
+#define RCAR_MINOR_SHIFT U(0)
+#define RCAR_MAJOR_OFFSET U(1)
+#define RCAR_PRODUCT_H3_CUT10 (RCAR_PRODUCT_H3 | U(0x00)) /* 1.0 */
+#define RCAR_PRODUCT_H3_CUT11 (RCAR_PRODUCT_H3 | U(0x01)) /* 1.1 */
+#define RCAR_PRODUCT_H3_CUT20 (RCAR_PRODUCT_H3 | U(0x10)) /* 2.0 */
+#define RCAR_PRODUCT_M3_CUT10 (RCAR_PRODUCT_M3 | U(0x00)) /* 1.0 */
+#define RCAR_PRODUCT_M3_CUT11 (RCAR_PRODUCT_M3 | U(0x10))
+#define RCAR_CPU_MASK_CA57 U(0x80000000)
+#define RCAR_CPU_MASK_CA53 U(0x04000000)
+#define RCAR_CPU_HAVE_CA57 U(0x00000000)
+#define RCAR_CPU_HAVE_CA53 U(0x00000000)
+#define RCAR_SSCG_MASK U(0x1000) /* MD12 */
+#define RCAR_SSCG_ENABLE U(0x1000)
+/* MD pin information */
+#define MODEMR_BOOT_CPU_MASK U(0x000000C0)
+#define MODEMR_BOOT_CPU_CR7 U(0x000000C0)
+#define MODEMR_BOOT_CPU_CA57 U(0x00000000)
+#define MODEMR_BOOT_CPU_CA53 U(0x00000040)
+#define MODEMR_BOOT_DEV_MASK U(0x0000001E)
+#define MODEMR_BOOT_DEV_HYPERFLASH160 U(0x00000004)
+#define MODEMR_BOOT_DEV_HYPERFLASH80 U(0x00000006)
+#define MODEMR_BOOT_DEV_QSPI_FLASH40 U(0x00000008)
+#define MODEMR_BOOT_DEV_QSPI_FLASH80 U(0x0000000C)
+#define MODEMR_BOOT_DEV_EMMC_25X1 U(0x0000000A)
+#define MODEMR_BOOT_DEV_EMMC_50X8 U(0x0000001A)
+#define MODEMR_BOOT_PLL_MASK U(0x00006000)
+#define MODEMR_BOOT_PLL_SHIFT U(13)
+/* Memory mapped Generic timer interfaces */
+#define ARM_SYS_CNTCTL_BASE RCAR_CNTC_BASE
+/* MODEMR PLL masks and bitfield values */
+#define CHECK_MD13_MD14 U(0x6000)
+#define MD14_MD13_TYPE_0 U(0x0000) /* MD14=0 MD13=0 */
+#define MD14_MD13_TYPE_1 U(0x2000) /* MD14=0 MD13=1 */
+#define MD14_MD13_TYPE_2 U(0x4000) /* MD14=1 MD13=0 */
+#define MD14_MD13_TYPE_3 U(0x6000) /* MD14=1 MD13=1 */
+/* Frequency of EXTAL(Hz) */
+#define EXTAL_MD14_MD13_TYPE_0 U(8333300) /* MD14=0 MD13=0 */
+#define EXTAL_MD14_MD13_TYPE_1 U(10000000) /* MD14=0 MD13=1 */
+#define EXTAL_MD14_MD13_TYPE_2 U(12500000) /* MD14=1 MD13=0 */
+#define EXTAL_MD14_MD13_TYPE_3 U(16666600) /* MD14=1 MD13=1 */
+#define EXTAL_SALVATOR_XS U(8320000) /* Salvator-XS */
+#define EXTAL_EBISU U(24000000) /* Ebisu */
+/* CPU Auxiliary Control Register */
+#define RCAR_CA57_DIS_LOAD_PASS_STORE (ULL(1) << 55)
+/* CPG write protect registers */
+#define CPGWPR_PASSWORD (0x5A5AFFFFU)
+#define CPGWPCR_PASSWORD (0xA5A50000U)
+/* CA5x Debug Resource control registers */
+#define CPG_CA57DBGRCR (CPG_BASE + 0x2180U)
+#define CPG_CA53DBGRCR (CPG_BASE + 0x1180U)
+#define DBGCPUPREN ((uint32_t)1U << 19U)
+#define CPG_PLL0CR (CPG_BASE + 0x00D8U)
+#define CPG_PLL2CR (CPG_BASE + 0x002CU)
+#define CPG_PLL4CR (CPG_BASE + 0x01F4U)
+/* RST Registers */
+#define RST_BASE (0xE6160000U)
+#define RST_WDTRSTCR (RST_BASE + 0x0054U)
+#define WDTRSTCR_PASSWORD (0xA55A0000U)
+#define WDTRSTCR_RWDT_RSTMSK ((uint32_t)1U << 0U)
+/* MFIS Registers */
+#define MFISWPCNTR_PASSWORD (0xACCE0000U)
+#define MFISWPCNTR (0xE6260900U)
+/* IPMMU registers */
+#define IPMMU_MM_BASE (0xE67B0000U)
+#define IPMMUMM_IMSCTLR (IPMMU_MM_BASE + 0x0500U)
+#define IPMMUMM_IMAUXCTLR (IPMMU_MM_BASE + 0x0504U)
+#define IPMMUMM_IMSCTLR_ENABLE (0xC0000000U)
+#define IPMMUMM_IMAUXCTLR_NMERGE40_BIT (0x01000000U)
+#define IMSCTLR_DISCACHE (0xE0000000U)
+#define IPMMU_VI0_BASE (0xFEBD0000U)
+#define IPMMUVI0_IMSCTLR (IPMMU_VI0_BASE + 0x0500U)
+#define IPMMU_VI1_BASE (0xFEBE0000U)
+#define IPMMUVI1_IMSCTLR (IPMMU_VI1_BASE + 0x0500U)
+#define IPMMU_PV0_BASE (0xFD800000U)
+#define IPMMUPV0_IMSCTLR (IPMMU_PV0_BASE + 0x0500U)
+#define IPMMU_PV1_BASE (0xFD950000U)
+#define IPMMUPV1_IMSCTLR (IPMMU_PV1_BASE + 0x0500U)
+#define IPMMU_PV2_BASE (0xFD960000U)
+#define IPMMUPV2_IMSCTLR (IPMMU_PV2_BASE + 0x0500U)
+#define IPMMU_PV3_BASE (0xFD970000U)
+#define IPMMUPV3_IMSCTLR (IPMMU_PV3_BASE + 0x0500U)
+#define IPMMU_HC_BASE (0xE6570000U)
+#define IPMMUHC_IMSCTLR (IPMMU_HC_BASE + 0x0500U)
+#define IPMMU_RT_BASE (0xFFC80000U)
+#define IPMMURT_IMSCTLR (IPMMU_RT_BASE + 0x0500U)
+#define IPMMU_MP_BASE (0xEC670000U)
+#define IPMMUMP_IMSCTLR (IPMMU_MP_BASE + 0x0500U)
+#define IPMMU_DS0_BASE (0xE6740000U)
+#define IPMMUDS0_IMSCTLR (IPMMU_DS0_BASE + 0x0500U)
+#define IPMMU_DS1_BASE (0xE7740000U)
+#define IPMMUDS1_IMSCTLR (IPMMU_DS1_BASE + 0x0500U)
+/* ARMREG registers */
+#define P_ARMREG_SEC_CTRL (0xE62711F0U)
+#define P_ARMREG_SEC_CTRL_PROT (0x00000001U)
+/* MIDR */
+#define MIDR_CA57 (0x0D07U << MIDR_PN_SHIFT)
+#define MIDR_CA53 (0x0D03U << MIDR_PN_SHIFT)
+/* for SuspendToRAM */
+#define GPIO_BASE (0xE6050000U)
+#define GPIO_INDT1 (GPIO_BASE + 0x100CU)
+#define GPIO_INDT6 (GPIO_BASE + 0x540CU)
+#define RCAR_COLD_BOOT (0x00U)
+#define RCAR_WARM_BOOT (0x01U)
+#if PMIC_ROHM_BD9571 && RCAR_SYSTEM_RESET_KEEPON_DDR
+#define KEEP10_MAGIC (0x55U)
+#endif
+/* lossy registers */
+#define LOSSY_PARAMS_BASE (0x47FD7000U)
+#define AXI_DCMPAREACRA0 (0xE6784100U)
+#define AXI_DCMPAREACRB0 (0xE6784104U)
+#define LOSSY_ENABLE (0x80000000U)
+#define LOSSY_DISABLE (0x00000000U)
+#define LOSSY_FMT_YUVPLANAR (0x00000000U)
+#define LOSSY_FMT_YUV422INTLV (0x20000000U)
+#define LOSSY_FMT_ARGB8888 (0x40000000U)
+#define LOSSY_ST_ADDR0 (0x54000000U)
+#define LOSSY_END_ADDR0 (0x57000000U)
+#define LOSSY_FMT0 LOSSY_FMT_YUVPLANAR
+#define LOSSY_ENA_DIS0 LOSSY_ENABLE
+#define LOSSY_ST_ADDR1 0x0U
+#define LOSSY_END_ADDR1 0x0U
+#define LOSSY_FMT1 LOSSY_FMT_ARGB8888
+#define LOSSY_ENA_DIS1 LOSSY_DISABLE
+#define LOSSY_ST_ADDR2 0x0U
+#define LOSSY_END_ADDR2 0x0U
+#define LOSSY_FMT2 LOSSY_FMT_YUV422INTLV
+#define LOSSY_ENA_DIS2 LOSSY_DISABLE
+
+#endif
diff --git a/plat/renesas/rcar/include/rcar_private.h b/plat/renesas/rcar/include/rcar_private.h
new file mode 100644
index 0000000..dd35826
--- /dev/null
+++ b/plat/renesas/rcar/include/rcar_private.h
@@ -0,0 +1,101 @@
+/*
+ * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef RCAR_PRIVATE_H__
+#define RCAR_PRIVATE_H__
+
+#include <bakery_lock.h>
+#include <bl_common.h>
+#include <cpu_data.h>
+#include <platform_def.h>
+
+typedef volatile struct mailbox {
+ unsigned long value __aligned(CACHE_WRITEBACK_GRANULE);
+} mailbox_t;
+
+/*
+ * This structure represents the superset of information that is passed to
+ * BL31 e.g. while passing control to it from BL2 which is bl31_params
+ * and bl31_plat_params and its elements
+ */
+typedef struct bl2_to_bl31_params_mem {
+ image_info_t bl32_image_info;
+ image_info_t bl33_image_info;
+ entry_point_info_t bl33_ep_info;
+ entry_point_info_t bl32_ep_info;
+} bl2_to_bl31_params_mem_t;
+
+#if USE_COHERENT_MEM
+#define RCAR_INSTANTIATE_LOCK DEFINE_BAKERY_LOCK(rcar_lock);
+#define rcar_lock_init() bakery_lock_init(&rcar_lock)
+#define rcar_lock_get() bakery_lock_get(&rcar_lock)
+#define rcar_lock_release() bakery_lock_release(&rcar_lock)
+#else
+/*
+ * Constants to specify how many bakery locks this platform implements. These
+ * are used if the platform chooses not to use coherent memory for bakery lock
+ * data structures.
+ */
+#define RCAR_MAX_BAKERIES 2
+#define RCAR_PWRC_BAKERY_ID 0
+
+/*
+ * Definition of structure which holds platform specific per-cpu data. Currently
+ * it holds only the bakery lock information for each cpu. Constants to
+ * specify how many bakeries this platform implements and bakery ids are
+ * specified in rcar_def.h
+ */
+typedef struct rcar_cpu_data {
+ bakery_info_t pcpu_bakery_info[RCAR_MAX_BAKERIES];
+} rcar_cpu_data_t;
+
+#define RCAR_CPU_DATA_LOCK_OFFSET \
+ __builtin_offsetof(rcar_cpu_data_t, pcpu_bakery_info)
+/*
+ * Helper macros for bakery lock api when using the above rcar_cpu_data_t for
+ * bakery lock data structures. It assumes that the bakery_info is at the
+ * beginning of the platform specific per-cpu data.
+ */
+#define rcar_lock_init(_lock_arg)
+
+#define rcar_lock_get(_lock_arg) \
+ bakery_lock_get(_lock_arg, \
+ CPU_DATA_PLAT_PCPU_OFFSET + RCAR_CPU_DATA_LOCK_OFFSET)
+
+#define rcar_lock_release(_lock_arg) \
+ bakery_lock_release(_lock_arg, \
+ CPU_DATA_PLAT_PCPU_OFFSET + RCAR_CPU_DATA_LOCK_OFFSET)
+/* Ensure that the size of the RCAR specific per-cpu data structure and the size
+ * of the memory allocated in generic per-cpu data for the platform are the same
+ */
+CASSERT(PLAT_PCPU_DATA_SIZE == sizeof(rcar_cpu_data_t),
+ rcar_pcpu_data_size_mismatch);
+#endif
+/*
+ * Function and variable prototypes
+ */
+void rcar_configure_mmu_el3(unsigned long total_base,
+ unsigned long total_size,
+ unsigned long ro_start, unsigned long ro_limit
+#if USE_COHERENT_MEM
+ , unsigned long coh_start, unsigned long coh_limit
+#endif
+ );
+
+void rcar_setup_topology(void);
+void rcar_cci_disable(void);
+void rcar_cci_enable(void);
+void rcar_cci_init(void);
+
+void plat_invalidate_icache(void);
+void plat_cci_disable(void);
+void plat_cci_enable(void);
+void plat_cci_init(void);
+
+void mstpcr_write(uint32_t mstpcr, uint32_t mstpsr, uint32_t target_bit);
+void cpg_write(uintptr_t regadr, uint32_t regval);
+
+#endif
diff --git a/plat/renesas/rcar/include/rcar_version.h b/plat/renesas/rcar/include/rcar_version.h
new file mode 100644
index 0000000..9a9ad9c
--- /dev/null
+++ b/plat/renesas/rcar/include/rcar_version.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef RCAR_VERSION_H__
+#define RCAR_VERSION_H__
+
+#include <arch_helpers.h>
+
+#define VERSION_OF_RENESAS "1.0.22"
+#define VERSION_OF_RENESAS_MAXLEN (128)
+
+extern const uint8_t version_of_renesas[VERSION_OF_RENESAS_MAXLEN];
+
+#endif
diff --git a/plat/renesas/rcar/include/registers/axi_registers.h b/plat/renesas/rcar/include/registers/axi_registers.h
new file mode 100644
index 0000000..1d8f41d
--- /dev/null
+++ b/plat/renesas/rcar/include/registers/axi_registers.h
@@ -0,0 +1,246 @@
+/*
+ * Copyright (c) 2015-2017, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef AXI_REGISTER_H__
+#define AXI_REGISTER_H__
+
+/* AXI registers */
+
+/* AXI base address */
+#define AXI_BASE (0xE6780000U)
+
+/* address split */
+
+/* AXI address split control 0 */
+#define AXI_ADSPLCR0 (AXI_BASE + 0x4008U)
+/* AXI address split control 1 */
+#define AXI_ADSPLCR1 (AXI_BASE + 0x400CU)
+/* AXI address split control 2 */
+#define AXI_ADSPLCR2 (AXI_BASE + 0x4010U)
+/* AXI address split control 3 */
+#define AXI_ADSPLCR3 (AXI_BASE + 0x4014U)
+
+/* functional safety */
+
+/* AXI functional safety control */
+#define AXI_FUSACR (AXI_BASE + 0x4020U)
+
+/* decompression */
+
+/* AXI decompression area configuration A0 */
+#define AXI_DCMPAREACRA0 (AXI_BASE + 0x4100U)
+/* AXI decompression area configuration B0 */
+#define AXI_DCMPAREACRB0 (AXI_BASE + 0x4104U)
+/* AXI decompression area configuration A1 */
+#define AXI_DCMPAREACRA1 (AXI_BASE + 0x4108U)
+/* AXI decompression area configuration B1 */
+#define AXI_DCMPAREACRB1 (AXI_BASE + 0x410CU)
+/* AXI decompression area configuration A2 */
+#define AXI_DCMPAREACRA2 (AXI_BASE + 0x4110U)
+/* AXI decompression area configuration B2 */
+#define AXI_DCMPAREACRB2 (AXI_BASE + 0x4114U)
+/* AXI decompression area configuration A3 */
+#define AXI_DCMPAREACRA3 (AXI_BASE + 0x4118U)
+/* AXI decompression area configuration B3 */
+#define AXI_DCMPAREACRB3 (AXI_BASE + 0x411CU)
+/* AXI decompression area configuration A4 */
+#define AXI_DCMPAREACRA4 (AXI_BASE + 0x4120U)
+/* AXI decompression area configuration B4 */
+#define AXI_DCMPAREACRB4 (AXI_BASE + 0x4124U)
+/* AXI decompression area configuration A5 */
+#define AXI_DCMPAREACRA5 (AXI_BASE + 0x4128U)
+/* AXI decompression area configuration B5 */
+#define AXI_DCMPAREACRB5 (AXI_BASE + 0x412CU)
+/* AXI decompression area configuration A6 */
+#define AXI_DCMPAREACRA6 (AXI_BASE + 0x4130U)
+/* AXI decompression area configuration B6 */
+#define AXI_DCMPAREACRB6 (AXI_BASE + 0x4134U)
+/* AXI decompression area configuration A7 */
+#define AXI_DCMPAREACRA7 (AXI_BASE + 0x4138U)
+/* AXI decompression area configuration B7 */
+#define AXI_DCMPAREACRB7 (AXI_BASE + 0x413CU)
+/* AXI decompression area configuration A8 */
+#define AXI_DCMPAREACRA8 (AXI_BASE + 0x4140U)
+/* AXI decompression area configuration B8 */
+#define AXI_DCMPAREACRB8 (AXI_BASE + 0x4144U)
+/* AXI decompression area configuration A9 */
+#define AXI_DCMPAREACRA9 (AXI_BASE + 0x4148U)
+/* AXI decompression area configuration B9 */
+#define AXI_DCMPAREACRB9 (AXI_BASE + 0x414CU)
+/* AXI decompression area configuration A10 */
+#define AXI_DCMPAREACRA10 (AXI_BASE + 0x4150U)
+/* AXI decompression area configuration B10 */
+#define AXI_DCMPAREACRB10 (AXI_BASE + 0x4154U)
+/* AXI decompression area configuration A11 */
+#define AXI_DCMPAREACRA11 (AXI_BASE + 0x4158U)
+/* AXI decompression area configuration B11 */
+#define AXI_DCMPAREACRB11 (AXI_BASE + 0x415CU)
+/* AXI decompression area configuration A12 */
+#define AXI_DCMPAREACRA12 (AXI_BASE + 0x4160U)
+/* AXI decompression area configuration B12 */
+#define AXI_DCMPAREACRB12 (AXI_BASE + 0x4164U)
+/* AXI decompression area configuration A13 */
+#define AXI_DCMPAREACRA13 (AXI_BASE + 0x4168U)
+/* AXI decompression area configuration B13 */
+#define AXI_DCMPAREACRB13 (AXI_BASE + 0x416CU)
+/* AXI decompression area configuration A14 */
+#define AXI_DCMPAREACRA14 (AXI_BASE + 0x4170U)
+/* AXI decompression area configuration B14 */
+#define AXI_DCMPAREACRB14 (AXI_BASE + 0x4174U)
+/* AXI decompression area configuration A15 */
+#define AXI_DCMPAREACRA15 (AXI_BASE + 0x4178U)
+/* AXI decompression area configuration B15 */
+#define AXI_DCMPAREACRB15 (AXI_BASE + 0x417CU)
+/* AXI decompression shadow area configuration */
+#define AXI_DCMPSHDWCR (AXI_BASE + 0x4280U)
+
+/* SDRAM protection */
+
+/* AXI dram protected area division 0 */
+#define AXI_DPTDIVCR0 (AXI_BASE + 0x4400U)
+/* AXI dram protected area division 1 */
+#define AXI_DPTDIVCR1 (AXI_BASE + 0x4404U)
+/* AXI dram protected area division 2 */
+#define AXI_DPTDIVCR2 (AXI_BASE + 0x4408U)
+/* AXI dram protected area division 3 */
+#define AXI_DPTDIVCR3 (AXI_BASE + 0x440CU)
+/* AXI dram protected area division 4 */
+#define AXI_DPTDIVCR4 (AXI_BASE + 0x4410U)
+/* AXI dram protected area division 5 */
+#define AXI_DPTDIVCR5 (AXI_BASE + 0x4414U)
+/* AXI dram protected area division 6 */
+#define AXI_DPTDIVCR6 (AXI_BASE + 0x4418U)
+/* AXI dram protected area division 7 */
+#define AXI_DPTDIVCR7 (AXI_BASE + 0x441CU)
+/* AXI dram protected area division 8 */
+#define AXI_DPTDIVCR8 (AXI_BASE + 0x4420U)
+/* AXI dram protected area division 9 */
+#define AXI_DPTDIVCR9 (AXI_BASE + 0x4424U)
+/* AXI dram protected area division 10 */
+#define AXI_DPTDIVCR10 (AXI_BASE + 0x4428U)
+/* AXI dram protected area division 11 */
+#define AXI_DPTDIVCR11 (AXI_BASE + 0x442CU)
+/* AXI dram protected area division 12 */
+#define AXI_DPTDIVCR12 (AXI_BASE + 0x4430U)
+/* AXI dram protected area division 13 */
+#define AXI_DPTDIVCR13 (AXI_BASE + 0x4434U)
+/* AXI dram protected area division 14 */
+#define AXI_DPTDIVCR14 (AXI_BASE + 0x4438U)
+
+/* AXI dram protected area setting 0 */
+#define AXI_DPTCR0 (AXI_BASE + 0x4440U)
+/* AXI dram protected area setting 1 */
+#define AXI_DPTCR1 (AXI_BASE + 0x4444U)
+/* AXI dram protected area setting 2 */
+#define AXI_DPTCR2 (AXI_BASE + 0x4448U)
+/* AXI dram protected area setting 3 */
+#define AXI_DPTCR3 (AXI_BASE + 0x444CU)
+/* AXI dram protected area setting 4 */
+#define AXI_DPTCR4 (AXI_BASE + 0x4450U)
+/* AXI dram protected area setting 5 */
+#define AXI_DPTCR5 (AXI_BASE + 0x4454U)
+/* AXI dram protected area setting 6 */
+#define AXI_DPTCR6 (AXI_BASE + 0x4458U)
+/* AXI dram protected area setting 7 */
+#define AXI_DPTCR7 (AXI_BASE + 0x445CU)
+/* AXI dram protected area setting 8 */
+#define AXI_DPTCR8 (AXI_BASE + 0x4460U)
+/* AXI dram protected area setting 9 */
+#define AXI_DPTCR9 (AXI_BASE + 0x4464U)
+/* AXI dram protected area setting 10 */
+#define AXI_DPTCR10 (AXI_BASE + 0x4468U)
+/* AXI dram protected area setting 11 */
+#define AXI_DPTCR11 (AXI_BASE + 0x446CU)
+/* AXI dram protected area setting 12 */
+#define AXI_DPTCR12 (AXI_BASE + 0x4470U)
+/* AXI dram protected area setting 13 */
+#define AXI_DPTCR13 (AXI_BASE + 0x4474U)
+/* AXI dram protected area setting 14 */
+#define AXI_DPTCR14 (AXI_BASE + 0x4478U)
+/* AXI dram protected area setting 15 */
+#define AXI_DPTCR15 (AXI_BASE + 0x447CU)
+
+/* SRAM protection */
+
+/* AXI sram protected area division 0 */
+#define AXI_SPTDIVCR0 (AXI_BASE + 0x4500U)
+/* AXI sram protected area division 1 */
+#define AXI_SPTDIVCR1 (AXI_BASE + 0x4504U)
+/* AXI sram protected area division 2 */
+#define AXI_SPTDIVCR2 (AXI_BASE + 0x4508U)
+/* AXI sram protected area division 3 */
+#define AXI_SPTDIVCR3 (AXI_BASE + 0x450CU)
+/* AXI sram protected area division 4 */
+#define AXI_SPTDIVCR4 (AXI_BASE + 0x4510U)
+/* AXI sram protected area division 5 */
+#define AXI_SPTDIVCR5 (AXI_BASE + 0x4514U)
+/* AXI sram protected area division 6 */
+#define AXI_SPTDIVCR6 (AXI_BASE + 0x4518U)
+/* AXI sram protected area division 7 */
+#define AXI_SPTDIVCR7 (AXI_BASE + 0x451CU)
+/* AXI sram protected area division 8 */
+#define AXI_SPTDIVCR8 (AXI_BASE + 0x4520U)
+/* AXI sram protected area division 9 */
+#define AXI_SPTDIVCR9 (AXI_BASE + 0x4524U)
+/* AXI sram protected area division 10 */
+#define AXI_SPTDIVCR10 (AXI_BASE + 0x4528U)
+/* AXI sram protected area division 11 */
+#define AXI_SPTDIVCR11 (AXI_BASE + 0x452CU)
+/* AXI sram protected area division 12 */
+#define AXI_SPTDIVCR12 (AXI_BASE + 0x4530U)
+/* AXI sram protected area division 13 */
+#define AXI_SPTDIVCR13 (AXI_BASE + 0x4534U)
+/* AXI sram protected area division 14 */
+#define AXI_SPTDIVCR14 (AXI_BASE + 0x4538U)
+
+/* AXI sram protected area setting 0 */
+#define AXI_SPTCR0 (AXI_BASE + 0x4540U)
+/* AXI sram protected area setting 1 */
+#define AXI_SPTCR1 (AXI_BASE + 0x4544U)
+/* AXI sram protected area setting 2 */
+#define AXI_SPTCR2 (AXI_BASE + 0x4548U)
+/* AXI sram protected area setting 3 */
+#define AXI_SPTCR3 (AXI_BASE + 0x454CU)
+/* AXI sram protected area setting 4 */
+#define AXI_SPTCR4 (AXI_BASE + 0x4550U)
+/* AXI sram protected area setting 5 */
+#define AXI_SPTCR5 (AXI_BASE + 0x4554U)
+/* AXI sram protected area setting 6 */
+#define AXI_SPTCR6 (AXI_BASE + 0x4558U)
+/* AXI sram protected area setting 7 */
+#define AXI_SPTCR7 (AXI_BASE + 0x455CU)
+/* AXI sram protected area setting 8 */
+#define AXI_SPTCR8 (AXI_BASE + 0x4560U)
+/* AXI sram protected area setting 9 */
+#define AXI_SPTCR9 (AXI_BASE + 0x4564U)
+/* AXI sram protected area setting 10 */
+#define AXI_SPTCR10 (AXI_BASE + 0x4568U)
+/* AXI sram protected area setting 11 */
+#define AXI_SPTCR11 (AXI_BASE + 0x456CU)
+/* AXI sram protected area setting 12 */
+#define AXI_SPTCR12 (AXI_BASE + 0x4570U)
+/* AXI sram protected area setting 13 */
+#define AXI_SPTCR13 (AXI_BASE + 0x4574U)
+/* AXI sram protected area setting 14 */
+#define AXI_SPTCR14 (AXI_BASE + 0x4578U)
+/* AXI sram protected area setting 15 */
+#define AXI_SPTCR15 (AXI_BASE + 0x457CU)
+
+/* EDC base address */
+#define EDC_BASE (0xFF840000U)
+
+/* EDC edc enable */
+#define EDC_EDCEN (EDC_BASE + 0x0010U)
+/* EDC edc status 0 */
+#define EDC_EDCST0 (EDC_BASE + 0x0020U)
+/* EDC edc status 1 */
+#define EDC_EDCST1 (EDC_BASE + 0x0024U)
+/* EDC edc interrupt enable 0 */
+#define EDC_EDCINTEN0 (EDC_BASE + 0x0040U)
+/* EDC edc interrupt enable 1 */
+#define EDC_EDCINTEN1 (EDC_BASE + 0x0044U)
+
+#endif
diff --git a/plat/renesas/rcar/include/registers/cpg_registers.h b/plat/renesas/rcar/include/registers/cpg_registers.h
new file mode 100644
index 0000000..bd6e557
--- /dev/null
+++ b/plat/renesas/rcar/include/registers/cpg_registers.h
@@ -0,0 +1,136 @@
+/*
+ * Copyright (c) 2015-2017, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef CPG_REGISTER_H__
+#define CPG_REGISTER_H__
+
+/* CPG base address */
+#define CPG_BASE (0xE6150000U)
+
+/* CPG system module stop control 2 */
+#define CPG_SMSTPCR2 (CPG_BASE + 0x0138U)
+/* CPG software reset 2 */
+#define CPG_SRCR2 (CPG_BASE + 0x00B0U)
+/* CPG module stop status 2 */
+#define CPG_MSTPSR2 (CPG_BASE + 0x0040U)
+/* CPG write protect */
+#define CPG_CPGWPR (CPG_BASE + 0x0900U)
+/* CPG write protect control */
+#define CPG_CPGWPCR (CPG_BASE + 0x0904U)
+/* CPG system module stop control 9 */
+#define CPG_SMSTPCR9 (CPG_BASE + 0x0994U)
+/* CPG module stop status 9 */
+#define CPG_MSTPSR9 (CPG_BASE + 0x09A4U)
+
+/* CPG (SECURITY) registers */
+
+/* Secure Module Stop Control Register 0 */
+#define SCMSTPCR0 (CPG_BASE + 0x0B20U)
+/* Secure Module Stop Control Register 1 */
+#define SCMSTPCR1 (CPG_BASE + 0x0B24U)
+/* Secure Module Stop Control Register 2 */
+#define SCMSTPCR2 (CPG_BASE + 0x0B28U)
+/* Secure Module Stop Control Register 3 */
+#define SCMSTPCR3 (CPG_BASE + 0x0B2CU)
+/* Secure Module Stop Control Register 4 */
+#define SCMSTPCR4 (CPG_BASE + 0x0B30U)
+/* Secure Module Stop Control Register 5 */
+#define SCMSTPCR5 (CPG_BASE + 0x0B34U)
+/* Secure Module Stop Control Register 6 */
+#define SCMSTPCR6 (CPG_BASE + 0x0B38U)
+/* Secure Module Stop Control Register 7 */
+#define SCMSTPCR7 (CPG_BASE + 0x0B3CU)
+/* Secure Module Stop Control Register 8 */
+#define SCMSTPCR8 (CPG_BASE + 0x0B40U)
+/* Secure Module Stop Control Register 9 */
+#define SCMSTPCR9 (CPG_BASE + 0x0B44U)
+/* Secure Module Stop Control Register 10 */
+#define SCMSTPCR10 (CPG_BASE + 0x0B48U)
+/* Secure Module Stop Control Register 11 */
+#define SCMSTPCR11 (CPG_BASE + 0x0B4CU)
+
+/* CPG (SECURITY) registers */
+
+/* Secure Software Reset Access Enable Control Register 0 */
+#define SCSRSTECR0 (CPG_BASE + 0x0B80U)
+/* Secure Software Reset Access Enable Control Register 1 */
+#define SCSRSTECR1 (CPG_BASE + 0x0B84U)
+/* Secure Software Reset Access Enable Control Register 2 */
+#define SCSRSTECR2 (CPG_BASE + 0x0B88U)
+/* Secure Software Reset Access Enable Control Register 3 */
+#define SCSRSTECR3 (CPG_BASE + 0x0B8CU)
+/* Secure Software Reset Access Enable Control Register 4 */
+#define SCSRSTECR4 (CPG_BASE + 0x0B90U)
+/* Secure Software Reset Access Enable Control Register 5 */
+#define SCSRSTECR5 (CPG_BASE + 0x0B94U)
+/* Secure Software Reset Access Enable Control Register 6 */
+#define SCSRSTECR6 (CPG_BASE + 0x0B98U)
+/* Secure Software Reset Access Enable Control Register 7 */
+#define SCSRSTECR7 (CPG_BASE + 0x0B9CU)
+/* Secure Software Reset Access Enable Control Register 8 */
+#define SCSRSTECR8 (CPG_BASE + 0x0BA0U)
+/* Secure Software Reset Access Enable Control Register 9 */
+#define SCSRSTECR9 (CPG_BASE + 0x0BA4U)
+/* Secure Software Reset Access Enable Control Register 10 */
+#define SCSRSTECR10 (CPG_BASE + 0x0BA8U)
+/* Secure Software Reset Access Enable Control Register 11 */
+#define SCSRSTECR11 (CPG_BASE + 0x0BACU)
+
+/* CPG (REALTIME) registers */
+
+/* Realtime Module Stop Control Register 0 */
+#define RMSTPCR0 (CPG_BASE + 0x0110U)
+/* Realtime Module Stop Control Register 1 */
+#define RMSTPCR1 (CPG_BASE + 0x0114U)
+/* Realtime Module Stop Control Register 2 */
+#define RMSTPCR2 (CPG_BASE + 0x0118U)
+/* Realtime Module Stop Control Register 3 */
+#define RMSTPCR3 (CPG_BASE + 0x011CU)
+/* Realtime Module Stop Control Register 4 */
+#define RMSTPCR4 (CPG_BASE + 0x0120U)
+/* Realtime Module Stop Control Register 5 */
+#define RMSTPCR5 (CPG_BASE + 0x0124U)
+/* Realtime Module Stop Control Register 6 */
+#define RMSTPCR6 (CPG_BASE + 0x0128U)
+/* Realtime Module Stop Control Register 7 */
+#define RMSTPCR7 (CPG_BASE + 0x012CU)
+/* Realtime Module Stop Control Register 8 */
+#define RMSTPCR8 (CPG_BASE + 0x0980U)
+/* Realtime Module Stop Control Register 9 */
+#define RMSTPCR9 (CPG_BASE + 0x0984U)
+/* Realtime Module Stop Control Register 10 */
+#define RMSTPCR10 (CPG_BASE + 0x0988U)
+/* Realtime Module Stop Control Register 11 */
+#define RMSTPCR11 (CPG_BASE + 0x098CU)
+
+/* CPG (SYSTEM) registers */
+
+/* System Module Stop Control Register 0 */
+#define SMSTPCR0 (CPG_BASE + 0x0130U)
+/* System Module Stop Control Register 1 */
+#define SMSTPCR1 (CPG_BASE + 0x0134U)
+/* System Module Stop Control Register 2 */
+#define SMSTPCR2 (CPG_BASE + 0x0138U)
+/* System Module Stop Control Register 3 */
+#define SMSTPCR3 (CPG_BASE + 0x013CU)
+/* System Module Stop Control Register 4 */
+#define SMSTPCR4 (CPG_BASE + 0x0140U)
+/* System Module Stop Control Register 5 */
+#define SMSTPCR5 (CPG_BASE + 0x0144U)
+/* System Module Stop Control Register 6 */
+#define SMSTPCR6 (CPG_BASE + 0x0148U)
+/* System Module Stop Control Register 7 */
+#define SMSTPCR7 (CPG_BASE + 0x014CU)
+/* System Module Stop Control Register 8 */
+#define SMSTPCR8 (CPG_BASE + 0x0990U)
+/* System Module Stop Control Register 9 */
+#define SMSTPCR9 (CPG_BASE + 0x0994U)
+/* System Module Stop Control Register 10 */
+#define SMSTPCR10 (CPG_BASE + 0x0998U)
+/* System Module Stop Control Register 11 */
+#define SMSTPCR11 (CPG_BASE + 0x099CU)
+
+#endif
diff --git a/plat/renesas/rcar/include/registers/lifec_registers.h b/plat/renesas/rcar/include/registers/lifec_registers.h
new file mode 100644
index 0000000..b331be3
--- /dev/null
+++ b/plat/renesas/rcar/include/registers/lifec_registers.h
@@ -0,0 +1,144 @@
+/*
+ * Copyright (c) 2015-2017, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef LIFEC_REGISTER_H__
+#define LIFEC_REGISTER_H__
+
+#define LIFEC_SEC_BASE (0xE6110000U)
+
+#define SEC_SRC (LIFEC_SEC_BASE + 0x0008U)
+#define SEC_SEL0 (LIFEC_SEC_BASE + 0x0030U)
+#define SEC_SEL1 (LIFEC_SEC_BASE + 0x0034U)
+#define SEC_SEL2 (LIFEC_SEC_BASE + 0x0038U)
+#define SEC_SEL3 (LIFEC_SEC_BASE + 0x003CU)
+#define SEC_SEL4 (LIFEC_SEC_BASE + 0x0058U)
+#define SEC_SEL5 (LIFEC_SEC_BASE + 0x005CU)
+#define SEC_SEL6 (LIFEC_SEC_BASE + 0x0060U)
+#define SEC_SEL7 (LIFEC_SEC_BASE + 0x0064U)
+#define SEC_SEL8 (LIFEC_SEC_BASE + 0x0068U)
+#define SEC_SEL9 (LIFEC_SEC_BASE + 0x006CU)
+#define SEC_SEL10 (LIFEC_SEC_BASE + 0x0070U)
+#define SEC_SEL11 (LIFEC_SEC_BASE + 0x0074U)
+#define SEC_SEL12 (LIFEC_SEC_BASE + 0x0078U)
+#define SEC_SEL13 (LIFEC_SEC_BASE + 0x007CU)
+#define SEC_SEL14 (LIFEC_SEC_BASE + 0x0080U)
+#define SEC_SEL15 (LIFEC_SEC_BASE + 0x0084U)
+#define SEC_GRP0CR0 (LIFEC_SEC_BASE + 0x0138U)
+#define SEC_GRP1CR0 (LIFEC_SEC_BASE + 0x013CU)
+#define SEC_GRP0CR1 (LIFEC_SEC_BASE + 0x0140U)
+#define SEC_GRP1CR1 (LIFEC_SEC_BASE + 0x0144U)
+#define SEC_GRP0CR2 (LIFEC_SEC_BASE + 0x0148U)
+#define SEC_GRP1CR2 (LIFEC_SEC_BASE + 0x014CU)
+#define SEC_GRP0CR3 (LIFEC_SEC_BASE + 0x0150U)
+#define SEC_GRP1CR3 (LIFEC_SEC_BASE + 0x0154U)
+#define SEC_GRP0COND0 (LIFEC_SEC_BASE + 0x0158U)
+#define SEC_GRP1COND0 (LIFEC_SEC_BASE + 0x015CU)
+#define SEC_GRP0COND1 (LIFEC_SEC_BASE + 0x0160U)
+#define SEC_GRP1COND1 (LIFEC_SEC_BASE + 0x0164U)
+#define SEC_GRP0COND2 (LIFEC_SEC_BASE + 0x0168U)
+#define SEC_GRP1COND2 (LIFEC_SEC_BASE + 0x016CU)
+#define SEC_GRP0COND3 (LIFEC_SEC_BASE + 0x0170U)
+#define SEC_GRP1COND3 (LIFEC_SEC_BASE + 0x0174U)
+#define SEC_GRP0COND4 (LIFEC_SEC_BASE + 0x0178U)
+#define SEC_GRP1COND4 (LIFEC_SEC_BASE + 0x017CU)
+#define SEC_GRP0COND5 (LIFEC_SEC_BASE + 0x0180U)
+#define SEC_GRP1COND5 (LIFEC_SEC_BASE + 0x0184U)
+#define SEC_GRP0COND6 (LIFEC_SEC_BASE + 0x0188U)
+#define SEC_GRP1COND6 (LIFEC_SEC_BASE + 0x018CU)
+#define SEC_GRP0COND7 (LIFEC_SEC_BASE + 0x0190U)
+#define SEC_GRP1COND7 (LIFEC_SEC_BASE + 0x0194U)
+#define SEC_GRP0COND8 (LIFEC_SEC_BASE + 0x0198U)
+#define SEC_GRP1COND8 (LIFEC_SEC_BASE + 0x019CU)
+#define SEC_GRP0COND9 (LIFEC_SEC_BASE + 0x01A0U)
+#define SEC_GRP1COND9 (LIFEC_SEC_BASE + 0x01A4U)
+#define SEC_GRP0COND10 (LIFEC_SEC_BASE + 0x01A8U)
+#define SEC_GRP1COND10 (LIFEC_SEC_BASE + 0x01ACU)
+#define SEC_GRP0COND11 (LIFEC_SEC_BASE + 0x01B0U)
+#define SEC_GRP1COND11 (LIFEC_SEC_BASE + 0x01B4U)
+#define SEC_GRP0COND12 (LIFEC_SEC_BASE + 0x01B8U)
+#define SEC_GRP1COND12 (LIFEC_SEC_BASE + 0x01BCU)
+#define SEC_GRP0COND13 (LIFEC_SEC_BASE + 0x01C0U)
+#define SEC_GRP1COND13 (LIFEC_SEC_BASE + 0x01C4U)
+#define SEC_GRP0COND14 (LIFEC_SEC_BASE + 0x01C8U)
+#define SEC_GRP1COND14 (LIFEC_SEC_BASE + 0x01CCU)
+#define SEC_GRP0COND15 (LIFEC_SEC_BASE + 0x01D0U)
+#define SEC_GRP1COND15 (LIFEC_SEC_BASE + 0x01D4U)
+#define SEC_READONLY0 (LIFEC_SEC_BASE + 0x01D8U)
+#define SEC_READONLY1 (LIFEC_SEC_BASE + 0x01DCU)
+#define SEC_READONLY2 (LIFEC_SEC_BASE + 0x01E0U)
+#define SEC_READONLY3 (LIFEC_SEC_BASE + 0x01E4U)
+#define SEC_READONLY4 (LIFEC_SEC_BASE + 0x01E8U)
+#define SEC_READONLY5 (LIFEC_SEC_BASE + 0x01ECU)
+#define SEC_READONLY6 (LIFEC_SEC_BASE + 0x01F0U)
+#define SEC_READONLY7 (LIFEC_SEC_BASE + 0x01F4U)
+#define SEC_READONLY8 (LIFEC_SEC_BASE + 0x01F8U)
+#define SEC_READONLY9 (LIFEC_SEC_BASE + 0x01FCU)
+#define SEC_READONLY10 (LIFEC_SEC_BASE + 0x0200U)
+#define SEC_READONLY11 (LIFEC_SEC_BASE + 0x0204U)
+#define SEC_READONLY12 (LIFEC_SEC_BASE + 0x0208U)
+#define SEC_READONLY13 (LIFEC_SEC_BASE + 0x020CU)
+#define SEC_READONLY14 (LIFEC_SEC_BASE + 0x0210U)
+#define SEC_READONLY15 (LIFEC_SEC_BASE + 0x0214U)
+
+#define LIFEC_SAFE_BASE (0xE6120000U)
+#define SAFE_GRP0CR0 (LIFEC_SAFE_BASE + 0x0138U)
+#define SAFE_GRP1CR0 (LIFEC_SAFE_BASE + 0x013CU)
+#define SAFE_GRP0CR1 (LIFEC_SAFE_BASE + 0x0140U)
+#define SAFE_GRP1CR1 (LIFEC_SAFE_BASE + 0x0144U)
+#define SAFE_GRP0CR2 (LIFEC_SAFE_BASE + 0x0148U)
+#define SAFE_GRP1CR2 (LIFEC_SAFE_BASE + 0x014CU)
+#define SAFE_GRP0CR3 (LIFEC_SAFE_BASE + 0x0150U)
+#define SAFE_GRP1CR3 (LIFEC_SAFE_BASE + 0x0154U)
+#define SAFE_GRP0COND0 (LIFEC_SAFE_BASE + 0x0158U)
+#define SAFE_GRP1COND0 (LIFEC_SAFE_BASE + 0x015CU)
+#define SAFE_GRP0COND1 (LIFEC_SAFE_BASE + 0x0160U)
+#define SAFE_GRP1COND1 (LIFEC_SAFE_BASE + 0x0164U)
+#define SAFE_GRP0COND2 (LIFEC_SAFE_BASE + 0x0168U)
+#define SAFE_GRP1COND2 (LIFEC_SAFE_BASE + 0x016CU)
+#define SAFE_GRP0COND3 (LIFEC_SAFE_BASE + 0x0170U)
+#define SAFE_GRP1COND3 (LIFEC_SAFE_BASE + 0x0174U)
+#define SAFE_GRP0COND4 (LIFEC_SAFE_BASE + 0x0178U)
+#define SAFE_GRP1COND4 (LIFEC_SAFE_BASE + 0x017CU)
+#define SAFE_GRP0COND5 (LIFEC_SAFE_BASE + 0x0180U)
+#define SAFE_GRP1COND5 (LIFEC_SAFE_BASE + 0x0184U)
+#define SAFE_GRP0COND6 (LIFEC_SAFE_BASE + 0x0188U)
+#define SAFE_GRP1COND6 (LIFEC_SAFE_BASE + 0x018CU)
+#define SAFE_GRP0COND7 (LIFEC_SAFE_BASE + 0x0190U)
+#define SAFE_GRP1COND7 (LIFEC_SAFE_BASE + 0x0194U)
+#define SAFE_GRP0COND8 (LIFEC_SAFE_BASE + 0x0198U)
+#define SAFE_GRP1COND8 (LIFEC_SAFE_BASE + 0x019CU)
+#define SAFE_GRP0COND9 (LIFEC_SAFE_BASE + 0x01A0U)
+#define SAFE_GRP1COND9 (LIFEC_SAFE_BASE + 0x01A4U)
+#define SAFE_GRP0COND10 (LIFEC_SAFE_BASE + 0x01A8U)
+#define SAFE_GRP1COND10 (LIFEC_SAFE_BASE + 0x01ACU)
+#define SAFE_GRP0COND11 (LIFEC_SAFE_BASE + 0x01B0U)
+#define SAFE_GRP1COND11 (LIFEC_SAFE_BASE + 0x01B4U)
+#define SAFE_GRP0COND12 (LIFEC_SAFE_BASE + 0x01B8U)
+#define SAFE_GRP1COND12 (LIFEC_SAFE_BASE + 0x01BCU)
+#define SAFE_GRP0COND13 (LIFEC_SAFE_BASE + 0x01C0U)
+#define SAFE_GRP1COND13 (LIFEC_SAFE_BASE + 0x01C4U)
+#define SAFE_GRP0COND14 (LIFEC_SAFE_BASE + 0x01C8U)
+#define SAFE_GRP1COND14 (LIFEC_SAFE_BASE + 0x01CCU)
+#define SAFE_GRP0COND15 (LIFEC_SAFE_BASE + 0x01D0U)
+#define SAFE_GRP1COND15 (LIFEC_SAFE_BASE + 0x01D4U)
+#define SAFE_READONLY0 (LIFEC_SAFE_BASE + 0x01D8U)
+#define SAFE_READONLY1 (LIFEC_SAFE_BASE + 0x01DCU)
+#define SAFE_READONLY2 (LIFEC_SAFE_BASE + 0x01E0U)
+#define SAFE_READONLY3 (LIFEC_SAFE_BASE + 0x01E4U)
+#define SAFE_READONLY4 (LIFEC_SAFE_BASE + 0x01E8U)
+#define SAFE_READONLY5 (LIFEC_SAFE_BASE + 0x01ECU)
+#define SAFE_READONLY6 (LIFEC_SAFE_BASE + 0x01F0U)
+#define SAFE_READONLY7 (LIFEC_SAFE_BASE + 0x01F4U)
+#define SAFE_READONLY8 (LIFEC_SAFE_BASE + 0x01F8U)
+#define SAFE_READONLY9 (LIFEC_SAFE_BASE + 0x01FCU)
+#define SAFE_READONLY10 (LIFEC_SAFE_BASE + 0x0200U)
+#define SAFE_READONLY11 (LIFEC_SAFE_BASE + 0x0204U)
+#define SAFE_READONLY12 (LIFEC_SAFE_BASE + 0x0208U)
+#define SAFE_READONLY13 (LIFEC_SAFE_BASE + 0x020CU)
+#define SAFE_READONLY14 (LIFEC_SAFE_BASE + 0x0210U)
+#define SAFE_READONLY15 (LIFEC_SAFE_BASE + 0x0214U)
+
+#endif