diff --git a/include/drivers/arm/gicv3.h b/include/drivers/arm/gicv3.h
new file mode 100644
index 0000000..e874f5c
--- /dev/null
+++ b/include/drivers/arm/gicv3.h
@@ -0,0 +1,266 @@
+/*
+ * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __GICV3_H__
+#define __GICV3_H__
+
+/*******************************************************************************
+ * GICv3 miscellaneous definitions
+ ******************************************************************************/
+/* Interrupt group definitions */
+#define INT_TYPE_G1S		0
+#define INT_TYPE_G0		1
+#define INT_TYPE_G1NS		2
+
+/* Interrupt IDs reported by the HPPIR and IAR registers */
+#define PENDING_G1S_INTID	1020
+#define PENDING_G1NS_INTID	1021
+
+/* Constant to categorize LPI interrupt */
+#define MIN_LPI_ID		8192
+
+/*******************************************************************************
+ * GICv3 specific Distributor interface register offsets and constants.
+ ******************************************************************************/
+#define GICD_STATUSR		0x10
+#define GICD_SETSPI_NSR		0x40
+#define GICD_CLRSPI_NSR		0x48
+#define GICD_SETSPI_SR		0x50
+#define GICD_CLRSPI_SR		0x50
+#define GICD_IGRPMODR		0xd00
+#define GICD_IROUTER		0x6100
+#define GICD_PIDR2_GICV3	0xffe8
+
+#define IGRPMODR_SHIFT		5
+
+/* GICD_CTLR bit definitions */
+#define CTLR_ENABLE_G1NS_SHIFT		1
+#define CTLR_ENABLE_G1S_SHIFT		2
+#define CTLR_ARE_S_SHIFT		4
+#define CTLR_ARE_NS_SHIFT		5
+#define CTLR_DS_SHIFT			6
+#define CTLR_E1NWF_SHIFT		7
+#define GICD_CTLR_RWP_SHIFT		31
+
+#define CTLR_ENABLE_G1NS_MASK		0x1
+#define CTLR_ENABLE_G1S_MASK		0x1
+#define CTLR_ARE_S_MASK			0x1
+#define CTLR_ARE_NS_MASK		0x1
+#define CTLR_DS_MASK			0x1
+#define CTLR_E1NWF_MASK			0x1
+#define GICD_CTLR_RWP_MASK		0x1
+
+#define CTLR_ENABLE_G1NS_BIT		(1 << CTLR_ENABLE_G1NS_SHIFT)
+#define CTLR_ENABLE_G1S_BIT		(1 << CTLR_ENABLE_G1S_SHIFT)
+#define CTLR_ARE_S_BIT			(1 << CTLR_ARE_S_SHIFT)
+#define CTLR_ARE_NS_BIT			(1 << CTLR_ARE_NS_SHIFT)
+#define CTLR_DS_BIT			(1 << CTLR_DS_SHIFT)
+#define CTLR_E1NWF_BIT			(1 << CTLR_E1NWF_SHIFT)
+#define GICD_CTLR_RWP_BIT		(1 << GICD_CTLR_RWP_SHIFT)
+
+/* GICD_IROUTER shifts and masks */
+#define IROUTER_IRM_SHIFT	31
+#define IROUTER_IRM_MASK	0x1
+
+/*******************************************************************************
+ * GICv3 Re-distributor interface registers & constants
+ ******************************************************************************/
+#define GICR_PCPUBASE_SHIFT	0x11
+#define GICR_SGIBASE_OFFSET	(1 << 0x10)	/* 64 KB */
+#define GICR_CTLR		0x0
+#define GICR_TYPER		0x08
+#define GICR_WAKER		0x14
+#define GICR_IGROUPR0		(GICR_SGIBASE_OFFSET + 0x80)
+#define GICR_ISENABLER0		(GICR_SGIBASE_OFFSET + 0x100)
+#define GICR_ICENABLER0		(GICR_SGIBASE_OFFSET + 0x180)
+#define GICR_IPRIORITYR		(GICR_SGIBASE_OFFSET + 0x400)
+#define GICR_ICFGR0		(GICR_SGIBASE_OFFSET + 0xc00)
+#define GICR_ICFGR1		(GICR_SGIBASE_OFFSET + 0xc04)
+#define GICR_IGRPMODR0		(GICR_SGIBASE_OFFSET + 0xd00)
+
+/* GICR_CTLR bit definitions */
+#define GICR_CTLR_RWP_SHIFT	3
+#define GICR_CTLR_RWP_MASK	0x1
+#define GICR_CTLR_RWP_BIT	(1 << GICR_CTLR_RWP_SHIFT)
+
+/* GICR_WAKER bit definitions */
+#define WAKER_CA_SHIFT		2
+#define WAKER_PS_SHIFT		1
+
+#define WAKER_CA_MASK		0x1
+#define WAKER_PS_MASK		0x1
+
+#define WAKER_CA_BIT		(1 << WAKER_CA_SHIFT)
+#define WAKER_PS_BIT		(1 << WAKER_PS_SHIFT)
+
+/* GICR_TYPER bit definitions */
+#define TYPER_AFF_VAL_SHIFT	32
+#define TYPER_PROC_NUM_SHIFT	8
+#define TYPER_LAST_SHIFT	4
+
+#define TYPER_AFF_VAL_MASK	0xffffffff
+#define TYPER_PROC_NUM_MASK	0xffff
+#define TYPER_LAST_MASK		0x1
+
+#define TYPER_LAST_BIT		(1 << TYPER_LAST_SHIFT)
+
+/*******************************************************************************
+ * GICv3 CPU interface registers & constants
+ ******************************************************************************/
+/* ICC_SRE bit definitions*/
+#define ICC_SRE_EN_BIT		(1 << 3)
+#define ICC_SRE_DIB_BIT		(1 << 2)
+#define ICC_SRE_DFB_BIT		(1 << 1)
+#define ICC_SRE_SRE_BIT		(1 << 0)
+
+/* ICC_IGRPEN1_EL3 bit definitions */
+#define IGRPEN1_EL3_ENABLE_G1NS_SHIFT	0
+#define IGRPEN1_EL3_ENABLE_G1S_SHIFT	1
+
+#define IGRPEN1_EL3_ENABLE_G1NS_BIT	(1 << IGRPEN1_EL3_ENABLE_G1NS_SHIFT)
+#define IGRPEN1_EL3_ENABLE_G1S_BIT	(1 << IGRPEN1_EL3_ENABLE_G1S_SHIFT)
+
+/* ICC_IGRPEN0_EL1 bit definitions */
+#define IGRPEN1_EL1_ENABLE_G0_SHIFT	0
+#define IGRPEN1_EL1_ENABLE_G0_BIT	(1 << IGRPEN1_EL1_ENABLE_G0_SHIFT)
+
+/* ICC_HPPIR0_EL1 bit definitions */
+#define HPPIR0_EL1_INTID_SHIFT		0
+#define HPPIR0_EL1_INTID_MASK		0xffffff
+
+/* ICC_HPPIR1_EL1 bit definitions */
+#define HPPIR1_EL1_INTID_SHIFT		0
+#define HPPIR1_EL1_INTID_MASK		0xffffff
+
+/* ICC_IAR0_EL1 bit definitions */
+#define IAR0_EL1_INTID_SHIFT		0
+#define IAR0_EL1_INTID_MASK		0xffffff
+
+/* ICC_IAR1_EL1 bit definitions */
+#define IAR1_EL1_INTID_SHIFT		0
+#define IAR1_EL1_INTID_MASK		0xffffff
+
+#ifndef __ASSEMBLY__
+
+#include <stdint.h>
+
+#define gicv3_is_intr_id_special_identifier(id)	\
+	(((id) >= PENDING_G1S_INTID) && ((id) <= GIC_SPURIOUS_INTERRUPT))
+
+/*******************************************************************************
+ * Helper GICv3 macros for SEL1
+ ******************************************************************************/
+#define gicv3_acknowledge_interrupt_sel1()	read_icc_iar1_el1() &\
+							IAR1_EL1_INTID_MASK
+#define gicv3_get_pending_interrupt_id_sel1()	read_icc_hppir1_el1() &\
+							HPPIR1_EL1_INTID_MASK
+#define gicv3_end_of_interrupt_sel1(id)		write_icc_eoir1_el1(id)
+
+
+/*******************************************************************************
+ * Helper GICv3 macros for EL3
+ ******************************************************************************/
+#define gicv3_acknowledge_interrupt()		read_icc_iar0_el1() &\
+							IAR0_EL1_INTID_MASK
+#define gicv3_end_of_interrupt(id)		write_icc_eoir0_el1(id)
+
+/*******************************************************************************
+ * This structure describes some of the implementation defined attributes of the
+ * GICv3 IP. It is used by the platform port to specify these attributes in order
+ * to initialise the GICV3 driver. The attributes are described below.
+ *
+ * 1. The 'gicd_base' field contains the base address of the Distributor
+ *    interface programmer's view.
+ *
+ * 2. The 'gicr_base' field contains the base address of the Re-distributor
+ *    interface programmer's view.
+ *
+ * 3. The 'g0_interrupt_array' field is a ponter to an array in which each
+ *    entry corresponds to an ID of a Group 0 interrupt.
+ *
+ * 4. The 'g0_interrupt_num' field contains the number of entries in the
+ *    'g0_interrupt_array'.
+ *
+ * 5. The 'g1s_interrupt_array' field is a ponter to an array in which each
+ *    entry corresponds to an ID of a Group 1 interrupt.
+ *
+ * 6. The 'g1s_interrupt_num' field contains the number of entries in the
+ *    'g1s_interrupt_array'.
+ *
+ * 7. The 'rdistif_num' field contains the number of Redistributor interfaces
+ *    the GIC implements. This is equal to the number of CPUs or CPU interfaces
+ *    instantiated in the GIC.
+ *
+ * 8. The 'rdistif_base_addrs' field is a pointer to an array that has an entry
+ *    for storing the base address of the Redistributor interface frame of each
+ *    CPU in the system. The size of the array = 'rdistif_num'. The base
+ *    addresses are detected during driver initialisation.
+ *
+ * 9. The 'mpidr_to_core_pos' field is a pointer to a hash function which the
+ *    driver will use to convert an MPIDR value to a linear core index. This
+ *    index will be used for accessing the 'rdistif_base_addrs' array. This is
+ *    an optional field. A GICv3 implementation maps each MPIDR to a linear core
+ *    index as well. This mapping can be found by reading the "Affinity Value"
+ *    and "Processor Number" fields in the GICR_TYPER. It is IMP. DEF. if the
+ *    "Processor Numbers" are suitable to index into an array to access core
+ *    specific information. If this not the case, the platform port must provide
+ *    a hash function. Otherwise, the "Processor Number" field will be used to
+ *    access the array elements.
+ ******************************************************************************/
+typedef unsigned int (*mpidr_hash_fn)(unsigned long mpidr);
+
+typedef struct gicv3_driver_data {
+	uintptr_t gicd_base;
+	uintptr_t gicr_base;
+	unsigned int g0_interrupt_num;
+	unsigned int g1s_interrupt_num;
+	const unsigned int *g0_interrupt_array;
+	const unsigned int *g1s_interrupt_array;
+	unsigned int rdistif_num;
+	uintptr_t *rdistif_base_addrs;
+	mpidr_hash_fn mpidr_to_core_pos;
+} gicv3_driver_data_t;
+
+/*******************************************************************************
+ * GICv3 EL3 driver API
+ ******************************************************************************/
+void gicv3_driver_init(const gicv3_driver_data_t *plat_driver_data);
+void gicv3_distif_init(void);
+void gicv3_rdistif_init(unsigned int proc_num);
+void gicv3_cpuif_enable(unsigned int proc_num);
+void gicv3_cpuif_disable(unsigned int proc_num);
+unsigned int gicv3_get_pending_interrupt_type(void);
+unsigned int gicv3_get_pending_interrupt_id(void);
+unsigned int gicv3_get_interrupt_type(unsigned int id,
+					  unsigned int proc_num);
+
+
+#endif /* __ASSEMBLY__ */
+#endif /* __GICV3_H__ */