diff --git a/drivers/brcm/sotp.c b/drivers/brcm/sotp.c
new file mode 100644
index 0000000..63c4820
--- /dev/null
+++ b/drivers/brcm/sotp.c
@@ -0,0 +1,323 @@
+/*
+ * Copyright (c) 2016-2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <string.h>
+
+#include <common/debug.h>
+#include <lib/mmio.h>
+#include <sotp.h>
+
+#include <platform_def.h>
+#include <platform_sotp.h>
+
+#ifdef USE_SOFT_SOTP
+extern uint64_t soft_sotp[];
+#endif
+
+#define SOTP_PROG_CONTROL (SOTP_REGS_OTP_BASE + 0x0000)
+#define SOTP_PROG_CONTROL__OTP_CPU_MODE_EN 15
+#define SOTP_PROG_CONTROL__OTP_DISABLE_ECC 9
+#define SOTP_PROG_CONTROL__OTP_ECC_WREN 8
+
+#define SOTP_WRDATA_0 (SOTP_REGS_OTP_BASE + 0x0004)
+#define SOTP_WRDATA_1 (SOTP_REGS_OTP_BASE + 0x0008)
+
+#define SOTP_ADDR (SOTP_REGS_OTP_BASE + 0x000c)
+#define SOTP_ADDR__OTP_ROW_ADDR_R 6
+#define SOTP_ADDR_MASK 0x3FF
+
+#define SOTP_CTRL_0 (SOTP_REGS_OTP_BASE + 0x0010)
+#define SOTP_CTRL_0__START 0
+#define SOTP_CTRL_0__OTP_CMD 1
+
+#define SOTP_STATUS_0 (SOTP_REGS_OTP_BASE + 0x0018)
+#define SOTP_STATUS__FDONE 3
+
+#define SOTP_STATUS_1 (SOTP_REGS_OTP_BASE + 0x001c)
+#define SOTP_STATUS_1__CMD_DONE 1
+#define SOTP_STATUS_1__ECC_DET 17
+
+#define SOTP_RDDATA_0 (SOTP_REGS_OTP_BASE + 0x0020)
+#define SOTP_RDDATA_1 (SOTP_REGS_OTP_BASE + 0x0024)
+
+#define SOTP_READ 0
+
+#define SOTP_PROG_WORD 10
+#define SOTP_STATUS__PROGOK 2
+#define SOTP_PROG_ENABLE 2
+
+#define SOTP_ROW_DATA_MASK 0xffffffff
+#define SOTP_ECC_ERR_BITS_MASK 0x1ff00000000
+
+#define SOTP_CHIP_CTRL_SW_OVERRIDE_CHIP_STATES 4
+#define SOTP_CHIP_CTRL_SW_MANU_PROG 5
+#define SOTP_CHIP_CTRL_SW_CID_PROG 6
+#define SOTP_CHIP_CTRL_SW_AB_DEVICE 8
+#define SOTP_CHIP_CTRL_SW_AB_DEV_MODE 9
+#define CHIP_STATE_UNPROGRAMMED 0x1
+#define CHIP_STATE_UNASSIGNED 0x2
+
+uint64_t sotp_mem_read(uint32_t offset, uint32_t sotp_add_ecc)
+{
+#ifdef USE_SOFT_SOTP
+	(void)sotp_add_ecc;
+
+	return soft_sotp[offset];
+#else
+	uint64_t read_data = 0;
+	uint64_t read_data1 = 0;
+	uint64_t read_data2 = 0;
+
+	/* Check for FDONE status */
+	while ((mmio_read_32(SOTP_STATUS_0) & BIT(SOTP_STATUS__FDONE)) !=
+	       BIT(SOTP_STATUS__FDONE))
+		;
+
+	/* Enable OTP access by CPU */
+	mmio_setbits_32(SOTP_PROG_CONTROL,
+			BIT(SOTP_PROG_CONTROL__OTP_CPU_MODE_EN));
+
+	if (sotp_add_ecc == 1) {
+		mmio_clrbits_32(SOTP_PROG_CONTROL,
+				BIT(SOTP_PROG_CONTROL__OTP_DISABLE_ECC));
+	}
+
+	if (sotp_add_ecc == 0) {
+		mmio_setbits_32(SOTP_PROG_CONTROL,
+				BIT(SOTP_PROG_CONTROL__OTP_DISABLE_ECC));
+	}
+
+	mmio_write_32(SOTP_ADDR,
+		      ((offset & SOTP_ADDR_MASK) << SOTP_ADDR__OTP_ROW_ADDR_R));
+	mmio_write_32(SOTP_CTRL_0, (SOTP_READ << SOTP_CTRL_0__OTP_CMD));
+
+	/* Start bit to tell SOTP to send command to the OTP controller */
+	mmio_setbits_32(SOTP_CTRL_0, BIT(SOTP_CTRL_0__START));
+
+	/* Wait for SOTP command done to be set */
+	while ((mmio_read_32(SOTP_STATUS_1) & BIT(SOTP_STATUS_1__CMD_DONE)) !=
+	      BIT(SOTP_STATUS_1__CMD_DONE))
+		;
+
+	/* Clr Start bit after command done */
+	mmio_clrbits_32(SOTP_CTRL_0, BIT(SOTP_CTRL_0__START));
+
+	if ((offset > SOTP_DEVICE_SECURE_CFG3_ROW) &&
+	    (mmio_read_32(SOTP_STATUS_1) & BIT(SOTP_STATUS_1__ECC_DET))) {
+		ERROR("SOTP ECC ERROR Detected row offset %d\n", offset);
+		read_data = SOTP_ECC_ERR_DETECT;
+	} else {
+		read_data1 = (uint64_t)mmio_read_32(SOTP_RDDATA_0);
+		read_data1 = read_data1 & 0xFFFFFFFF;
+		read_data2 = (uint64_t)mmio_read_32(SOTP_RDDATA_1);
+		read_data2 = (read_data2 & 0x1ff) << 32;
+		read_data = read_data1 | read_data2;
+	}
+
+	/* Command done is cleared */
+	mmio_setbits_32(SOTP_STATUS_1, BIT(SOTP_STATUS_1__CMD_DONE));
+
+	/* disable OTP access by CPU */
+	mmio_clrbits_32(SOTP_PROG_CONTROL,
+			BIT(SOTP_PROG_CONTROL__OTP_CPU_MODE_EN));
+
+	return read_data;
+#endif
+}
+
+void sotp_mem_write(uint32_t addr, uint32_t sotp_add_ecc, uint64_t wdata)
+{
+#ifdef USE_SOFT_SOTP
+	(void)sotp_add_ecc;
+
+	soft_sotp[addr] = wdata;
+#else
+	uint32_t loop;
+	uint8_t prog_array[4] = { 0x0F, 0x04, 0x08, 0x0D };
+
+	uint32_t chip_state_default =
+		(CHIP_STATE_UNASSIGNED|CHIP_STATE_UNPROGRAMMED);
+	uint32_t chip_state = mmio_read_32(SOTP_REGS_SOTP_CHIP_STATES);
+	uint32_t chip_ctrl_default = 0;
+
+	/*
+	 * The override settings is required to allow the customer to program
+	 * the application specific keys into SOTP, before the conversion to
+	 * one of the AB modes.
+	 * At the end of write operation, the chip ctrl settings will restored
+	 * to the state prior to write call
+	 */
+	if (chip_state & chip_state_default) {
+		uint32_t chip_ctrl;
+
+		chip_ctrl_default = mmio_read_32(SOTP_CHIP_CTRL);
+		INFO("SOTP: enable special prog mode\n");
+
+		chip_ctrl = BIT(SOTP_CHIP_CTRL_SW_OVERRIDE_CHIP_STATES) |
+			    BIT(SOTP_CHIP_CTRL_SW_MANU_PROG) |
+			    BIT(SOTP_CHIP_CTRL_SW_CID_PROG) |
+			    BIT(SOTP_CHIP_CTRL_SW_AB_DEVICE);
+		mmio_write_32(SOTP_CHIP_CTRL, chip_ctrl);
+	}
+
+	/*  Check for FDONE status */
+	while ((mmio_read_32(SOTP_STATUS_0) & BIT(SOTP_STATUS__FDONE)) !=
+	       BIT(SOTP_STATUS__FDONE))
+		;
+
+	/*  Enable OTP acces by CPU */
+	mmio_setbits_32(SOTP_PROG_CONTROL,
+			BIT(SOTP_PROG_CONTROL__OTP_CPU_MODE_EN));
+
+	if (addr > SOTP_DEVICE_SECURE_CFG3_ROW) {
+		if (sotp_add_ecc == 0) {
+			mmio_clrbits_32(SOTP_PROG_CONTROL,
+					BIT(SOTP_PROG_CONTROL__OTP_ECC_WREN));
+		}
+		if (sotp_add_ecc == 1) {
+			mmio_setbits_32(SOTP_PROG_CONTROL,
+					BIT(SOTP_PROG_CONTROL__OTP_ECC_WREN));
+		}
+	} else {
+		mmio_clrbits_32(SOTP_PROG_CONTROL,
+				BIT(SOTP_PROG_CONTROL__OTP_ECC_WREN));
+	}
+
+	mmio_write_32(SOTP_CTRL_0, (SOTP_PROG_ENABLE << 1));
+
+	/*
+	 * In order to avoid unintentional writes / programming of the OTP
+	 * array, the OTP Controller must be put into programming mode before
+	 * it will accept program commands. This is done by writing 0xF, 0x4,
+	 * 0x8, 0xD with program commands prior to starting the actual
+	 * programming sequence
+	 */
+	for (loop = 0; loop < 4; loop++) {
+		mmio_write_32(SOTP_WRDATA_0, prog_array[loop]);
+
+		/*
+		 * Start bit to tell SOTP to send command to the OTP controller
+		 */
+		mmio_setbits_32(SOTP_CTRL_0, BIT(SOTP_CTRL_0__START));
+
+		/*  Wait for SOTP command done to <-- be set */
+		while ((mmio_read_32(SOTP_STATUS_1) &
+			BIT(SOTP_STATUS_1__CMD_DONE)) !=
+		       BIT(SOTP_STATUS_1__CMD_DONE))
+			;
+
+		/* Command done is cleared w1c */
+		mmio_setbits_32(SOTP_STATUS_1, BIT(SOTP_STATUS_1__CMD_DONE));
+
+		/* Clr Start bit after command done */
+		mmio_clrbits_32(SOTP_CTRL_0, BIT(SOTP_CTRL_0__START));
+	}
+
+	/*  Check for PROGOK */
+	while ((mmio_read_32(SOTP_STATUS_0) & 0x4) != BIT(SOTP_STATUS__PROGOK))
+		;
+
+	/* Set  10 bit row address */
+	mmio_write_32(SOTP_ADDR,
+		      ((addr & SOTP_ADDR_MASK) << SOTP_ADDR__OTP_ROW_ADDR_R));
+
+	/* Set SOTP Row data */
+	mmio_write_32(SOTP_WRDATA_0, (wdata & SOTP_ROW_DATA_MASK));
+
+	/* Set SOTP ECC and error bits */
+	mmio_write_32(SOTP_WRDATA_1, ((wdata & SOTP_ECC_ERR_BITS_MASK) >> 32));
+
+	/* Set prog_word command */
+	mmio_write_32(SOTP_CTRL_0, (SOTP_PROG_WORD << 1));
+
+	/*  Start bit to tell SOTP to send command to the OTP controller */
+	mmio_setbits_32(SOTP_CTRL_0, BIT(SOTP_CTRL_0__START));
+
+	/*  Wait for SOTP command done to be set */
+	while ((mmio_read_32(SOTP_STATUS_1) & BIT(SOTP_STATUS_1__CMD_DONE)) !=
+	       BIT(SOTP_STATUS_1__CMD_DONE))
+		;
+
+	/* Command done is cleared w1c */
+	mmio_setbits_32(SOTP_STATUS_1, BIT(SOTP_STATUS_1__CMD_DONE));
+
+	/* disable OTP acces by CPU */
+	mmio_clrbits_32(SOTP_PROG_CONTROL,
+			BIT(SOTP_PROG_CONTROL__OTP_CPU_MODE_EN));
+
+	/* Clr Start bit after command done */
+	mmio_clrbits_32(SOTP_CTRL_0, BIT(SOTP_CTRL_0__START));
+
+	if (chip_state & chip_state_default)
+		mmio_write_32(SOTP_CHIP_CTRL, chip_ctrl_default);
+
+#endif
+}
+
+int sotp_read_key(uint8_t *key, size_t keysize, int start_row, int end_row)
+{
+	int row;
+	uint32_t status = 0;
+	uint32_t status2 = 0xFFFFFFFF;
+	uint64_t row_data;
+	uint32_t data;
+	uint32_t *temp_key = (uint32_t *)key;
+
+	row = start_row;
+	while ((keysize > 0) && (row <= end_row)) {
+		row_data = sotp_mem_read(row, SOTP_ROW_ECC);
+		if (!(row_data & (SOTP_ECC_ERR_DETECT | SOTP_FAIL_BITS))) {
+			memcpy(temp_key++, &row_data, sizeof(uint32_t));
+			keysize -= sizeof(uint32_t);
+			data = (uint32_t)(row_data & SOTP_ROW_DATA_MASK);
+			status |= data;
+			status2 &= data;
+		}
+		row++;
+	}
+
+	if ((status2 == 0xFFFFFFFF) || (status == 0) || (row > end_row))
+		return -1;
+
+	return 0;
+}
+
+int sotp_key_erased(void)
+{
+	uint64_t row_data;
+	int status = 0;
+
+	row_data = sotp_mem_read(SOTP_DEVICE_SECURE_CFG0_ROW, 0);
+	if (row_data & SOTP_DEVICE_SECURE_CFG0_OTP_ERASED_MASK)
+		status = 1;
+
+	else if (mmio_read_32(SOTP_REGS_SOTP_CHIP_STATES) &
+			SOTP_REGS_SOTP_CHIP_STATES_OTP_ERASED_MASK)
+		status = 1;
+
+	return status;
+}
+
+/*
+ * This function optimise the SOTP redundancy
+ * by considering the 00- zero and 01,10,11 - one
+ */
+uint32_t sotp_redundancy_reduction(uint32_t sotp_row_data)
+{
+	uint32_t opt_data;
+	uint32_t opt_loop;
+	uint32_t temp_data;
+
+	opt_data = 0;
+
+	for (opt_loop = 0; opt_loop < 16; opt_loop = opt_loop + 1) {
+		temp_data = ((sotp_row_data >> (opt_loop * 2)) & 0x3);
+
+		if (temp_data != 0x0)
+			opt_data = (opt_data | (1 << opt_loop));
+	}
+	return opt_data;
+}