diff --git a/bl2/bl2.mk b/bl2/bl2.mk
index d790738..6cb478d 100644
--- a/bl2/bl2.mk
+++ b/bl2/bl2.mk
@@ -34,4 +34,10 @@
 				common/aarch64/early_exceptions.S	\
 				lib/locks/exclusive/aarch64/spinlock.S
 
+ifeq (${LOAD_IMAGE_V2},1)
+BL2_SOURCES		+=	bl2/bl2_image_load_v2.c
+else
+BL2_SOURCES		+=	bl2/bl2_image_load.c
+endif
+
 BL2_LINKERFILE		:=	bl2/bl2.ld.S
diff --git a/bl2/bl2_image_load.c b/bl2/bl2_image_load.c
new file mode 100644
index 0000000..ee0eb96
--- /dev/null
+++ b/bl2/bl2_image_load.c
@@ -0,0 +1,285 @@
+/*
+ * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <assert.h>
+#include <auth_mod.h>
+#include <bl_common.h>
+#include <debug.h>
+#include <errno.h>
+#include <platform.h>
+#include <platform_def.h>
+#include <stdint.h>
+
+/*
+ * Check for platforms that use obsolete image terminology
+ */
+#ifdef BL30_BASE
+# error "BL30_BASE platform define no longer used - please use SCP_BL2_BASE"
+#endif
+
+/*******************************************************************************
+ * Load the SCP_BL2 image if there's one.
+ * If a platform does not want to attempt to load SCP_BL2 image it must leave
+ * SCP_BL2_BASE undefined.
+ * Return 0 on success or if there's no SCP_BL2 image to load, a negative error
+ * code otherwise.
+ ******************************************************************************/
+static int load_scp_bl2(void)
+{
+	int e = 0;
+#ifdef SCP_BL2_BASE
+	meminfo_t scp_bl2_mem_info;
+	image_info_t scp_bl2_image_info;
+
+	/*
+	 * It is up to the platform to specify where SCP_BL2 should be loaded if
+	 * it exists. It could create space in the secure sram or point to a
+	 * completely different memory.
+	 *
+	 * The entry point information is not relevant in this case as the AP
+	 * won't execute the SCP_BL2 image.
+	 */
+	INFO("BL2: Loading SCP_BL2\n");
+	bl2_plat_get_scp_bl2_meminfo(&scp_bl2_mem_info);
+	scp_bl2_image_info.h.version = VERSION_1;
+	e = load_auth_image(&scp_bl2_mem_info,
+			    SCP_BL2_IMAGE_ID,
+			    SCP_BL2_BASE,
+			    &scp_bl2_image_info,
+			    NULL);
+
+	if (e == 0) {
+		/* The subsequent handling of SCP_BL2 is platform specific */
+		e = bl2_plat_handle_scp_bl2(&scp_bl2_image_info);
+		if (e) {
+			ERROR("Failure in platform-specific handling of SCP_BL2 image.\n");
+		}
+	}
+#endif /* SCP_BL2_BASE */
+
+	return e;
+}
+
+#ifndef EL3_PAYLOAD_BASE
+/*******************************************************************************
+ * Load the BL31 image.
+ * The bl2_to_bl31_params and bl31_ep_info params will be updated with the
+ * relevant BL31 information.
+ * Return 0 on success, a negative error code otherwise.
+ ******************************************************************************/
+static int load_bl31(bl31_params_t *bl2_to_bl31_params,
+		     entry_point_info_t *bl31_ep_info)
+{
+	meminfo_t *bl2_tzram_layout;
+	int e;
+
+	INFO("BL2: Loading BL31\n");
+	assert(bl2_to_bl31_params != NULL);
+	assert(bl31_ep_info != NULL);
+
+	/* Find out how much free trusted ram remains after BL2 load */
+	bl2_tzram_layout = bl2_plat_sec_mem_layout();
+
+	/* Set the X0 parameter to BL31 */
+	bl31_ep_info->args.arg0 = (unsigned long)bl2_to_bl31_params;
+
+	/* Load the BL31 image */
+	e = load_auth_image(bl2_tzram_layout,
+			    BL31_IMAGE_ID,
+			    BL31_BASE,
+			    bl2_to_bl31_params->bl31_image_info,
+			    bl31_ep_info);
+
+	if (e == 0) {
+		bl2_plat_set_bl31_ep_info(bl2_to_bl31_params->bl31_image_info,
+					  bl31_ep_info);
+	}
+
+	return e;
+}
+
+/*******************************************************************************
+ * Load the BL32 image if there's one.
+ * The bl2_to_bl31_params param will be updated with the relevant BL32
+ * information.
+ * If a platform does not want to attempt to load BL32 image it must leave
+ * BL32_BASE undefined.
+ * Return 0 on success or if there's no BL32 image to load, a negative error
+ * code otherwise.
+ ******************************************************************************/
+static int load_bl32(bl31_params_t *bl2_to_bl31_params)
+{
+	int e = 0;
+#ifdef BL32_BASE
+	meminfo_t bl32_mem_info;
+
+	INFO("BL2: Loading BL32\n");
+	assert(bl2_to_bl31_params != NULL);
+
+	/*
+	 * It is up to the platform to specify where BL32 should be loaded if
+	 * it exists. It could create space in the secure sram or point to a
+	 * completely different memory.
+	 */
+	bl2_plat_get_bl32_meminfo(&bl32_mem_info);
+	e = load_auth_image(&bl32_mem_info,
+			    BL32_IMAGE_ID,
+			    BL32_BASE,
+			    bl2_to_bl31_params->bl32_image_info,
+			    bl2_to_bl31_params->bl32_ep_info);
+
+	if (e == 0) {
+		bl2_plat_set_bl32_ep_info(
+			bl2_to_bl31_params->bl32_image_info,
+			bl2_to_bl31_params->bl32_ep_info);
+	}
+#endif /* BL32_BASE */
+
+	return e;
+}
+
+#ifndef PRELOADED_BL33_BASE
+/*******************************************************************************
+ * Load the BL33 image.
+ * The bl2_to_bl31_params param will be updated with the relevant BL33
+ * information.
+ * Return 0 on success, a negative error code otherwise.
+ ******************************************************************************/
+static int load_bl33(bl31_params_t *bl2_to_bl31_params)
+{
+	meminfo_t bl33_mem_info;
+	int e;
+
+	INFO("BL2: Loading BL33\n");
+	assert(bl2_to_bl31_params != NULL);
+
+	bl2_plat_get_bl33_meminfo(&bl33_mem_info);
+
+	/* Load the BL33 image in non-secure memory provided by the platform */
+	e = load_auth_image(&bl33_mem_info,
+			    BL33_IMAGE_ID,
+			    plat_get_ns_image_entrypoint(),
+			    bl2_to_bl31_params->bl33_image_info,
+			    bl2_to_bl31_params->bl33_ep_info);
+
+	if (e == 0) {
+		bl2_plat_set_bl33_ep_info(bl2_to_bl31_params->bl33_image_info,
+					  bl2_to_bl31_params->bl33_ep_info);
+	}
+
+	return e;
+}
+#endif /* PRELOADED_BL33_BASE */
+
+#endif /* EL3_PAYLOAD_BASE */
+
+/*******************************************************************************
+ * This function loads SCP_BL2/BL3x images and returns the ep_info for
+ * the next executable image.
+ ******************************************************************************/
+entry_point_info_t *bl2_load_images(void)
+{
+	bl31_params_t *bl2_to_bl31_params;
+	entry_point_info_t *bl31_ep_info;
+	int e;
+
+	e = load_scp_bl2();
+	if (e) {
+		ERROR("Failed to load SCP_BL2 (%i)\n", e);
+		plat_error_handler(e);
+	}
+
+	/* Perform platform setup in BL2 after loading SCP_BL2 */
+	bl2_platform_setup();
+
+	/*
+	 * Get a pointer to the memory the platform has set aside to pass
+	 * information to BL31.
+	 */
+	bl2_to_bl31_params = bl2_plat_get_bl31_params();
+	bl31_ep_info = bl2_plat_get_bl31_ep_info();
+
+#ifdef EL3_PAYLOAD_BASE
+	/*
+	 * In the case of an EL3 payload, we don't need to load any further
+	 * images. Just update the BL31 entrypoint info structure to make BL1
+	 * jump to the EL3 payload.
+	 * The pointer to the memory the platform has set aside to pass
+	 * information to BL31 in the normal boot flow is reused here, even
+	 * though only a fraction of the information contained in the
+	 * bl31_params_t structure makes sense in the context of EL3 payloads.
+	 * This will be refined in the future.
+	 */
+	INFO("BL2: Populating the entrypoint info for the EL3 payload\n");
+	bl31_ep_info->pc = EL3_PAYLOAD_BASE;
+	bl31_ep_info->args.arg0 = (unsigned long) bl2_to_bl31_params;
+	bl2_plat_set_bl31_ep_info(NULL, bl31_ep_info);
+#else
+	e = load_bl31(bl2_to_bl31_params, bl31_ep_info);
+	if (e) {
+		ERROR("Failed to load BL31 (%i)\n", e);
+		plat_error_handler(e);
+	}
+
+	e = load_bl32(bl2_to_bl31_params);
+	if (e) {
+		if (e == -EAUTH) {
+			ERROR("Failed to authenticate BL32\n");
+			plat_error_handler(e);
+		} else {
+			WARN("Failed to load BL32 (%i)\n", e);
+		}
+	}
+
+#ifdef PRELOADED_BL33_BASE
+	/*
+	 * In this case, don't load the BL33 image as it's already loaded in
+	 * memory. Update BL33 entrypoint information.
+	 */
+	INFO("BL2: Populating the entrypoint info for the preloaded BL33\n");
+	bl2_to_bl31_params->bl33_ep_info->pc = PRELOADED_BL33_BASE;
+	bl2_plat_set_bl33_ep_info(NULL, bl2_to_bl31_params->bl33_ep_info);
+#else
+	e = load_bl33(bl2_to_bl31_params);
+	if (e) {
+		ERROR("Failed to load BL33 (%i)\n", e);
+		plat_error_handler(e);
+	}
+#endif /* PRELOADED_BL33_BASE */
+
+#endif /* EL3_PAYLOAD_BASE */
+
+	/* Flush the params to be passed to memory */
+	bl2_plat_flush_bl31_params();
+
+	return bl31_ep_info;
+}
diff --git a/bl2/bl2_image_load_v2.c b/bl2/bl2_image_load_v2.c
new file mode 100644
index 0000000..4fab655
--- /dev/null
+++ b/bl2/bl2_image_load_v2.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <assert.h>
+#include <auth_mod.h>
+#include <bl_common.h>
+#include <debug.h>
+#include <desc_image_load.h>
+#include <platform.h>
+#include <platform_def.h>
+#include <stdint.h>
+
+
+/*******************************************************************************
+ * This function loads SCP_BL2/BL3x images and returns the ep_info for
+ * the next executable image.
+ ******************************************************************************/
+entry_point_info_t *bl2_load_images(void)
+{
+	bl_params_t *bl2_to_next_bl_params;
+	bl_load_info_t *bl2_load_info;
+	const bl_load_info_node_t *bl2_node_info;
+	int plat_setup_done = 0;
+	int err;
+
+	/*
+	 * Get information about the images to load.
+	 */
+	bl2_load_info = plat_get_bl_image_load_info();
+	assert(bl2_load_info);
+	assert(bl2_load_info->head);
+	assert(bl2_load_info->h.type == PARAM_BL_LOAD_INFO);
+	assert(bl2_load_info->h.version >= VERSION_2);
+	bl2_node_info = bl2_load_info->head;
+
+	while (bl2_node_info) {
+		/*
+		 * Perform platform setup before loading the image,
+		 * if indicated in the image attributes AND if NOT
+		 * already done before.
+		 */
+		if (bl2_node_info->image_info->h.attr & IMAGE_ATTRIB_PLAT_SETUP) {
+			if (plat_setup_done) {
+				WARN("BL2: Platform setup already done!!\n");
+			} else {
+				INFO("BL2: Doing platform setup\n");
+				bl2_platform_setup();
+				plat_setup_done = 1;
+			}
+		}
+
+		if (!(bl2_node_info->image_info->h.attr & IMAGE_ATTRIB_SKIP_LOADING)) {
+			INFO("BL2: Loading image id %d\n", bl2_node_info->image_id);
+			err = load_auth_image(bl2_node_info->image_id,
+				bl2_node_info->image_info);
+			if (err) {
+				ERROR("BL2: Failed to load image (%i)\n", err);
+				plat_error_handler(err);
+			}
+		} else {
+			INFO("BL2: Skip loading image id %d\n", bl2_node_info->image_id);
+		}
+
+		/* Allow platform to handle image information. */
+		err = bl2_plat_handle_post_image_load(bl2_node_info->image_id);
+		if (err) {
+			ERROR("BL2: Failure in post image load handling (%i)\n", err);
+			plat_error_handler(err);
+		}
+
+		/* Go to next image */
+		bl2_node_info = bl2_node_info->next_load_info;
+	}
+
+	/*
+	 * Get information to pass to the next image.
+	 */
+	bl2_to_next_bl_params = plat_get_next_bl_params();
+	assert(bl2_to_next_bl_params);
+	assert(bl2_to_next_bl_params->head);
+	assert(bl2_to_next_bl_params->h.type == PARAM_BL_PARAMS);
+	assert(bl2_to_next_bl_params->h.version >= VERSION_2);
+
+	/* Flush the parameters to be passed to next image */
+	plat_flush_next_bl_params();
+
+	return bl2_to_next_bl_params->head->ep_info;
+}
diff --git a/bl2/bl2_main.c b/bl2/bl2_main.c
index c8fd683..fc93e1b 100644
--- a/bl2/bl2_main.c
+++ b/bl2/bl2_main.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2016, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -28,192 +28,23 @@
  * POSSIBILITY OF SUCH DAMAGE.
  */
 
-#include <arch.h>
 #include <arch_helpers.h>
-#include <assert.h>
 #include <auth_mod.h>
 #include <bl1.h>
 #include <bl_common.h>
 #include <debug.h>
-#include <errno.h>
 #include <platform.h>
-#include <platform_def.h>
-#include <stdint.h>
 #include "bl2_private.h"
 
-/*
- * Check for platforms that use obsolete image terminology
- */
-#ifdef BL30_BASE
-# error "BL30_BASE platform define no longer used - please use SCP_BL2_BASE"
-#endif
-
-/*******************************************************************************
- * Load the SCP_BL2 image if there's one.
- * If a platform does not want to attempt to load SCP_BL2 image it must leave
- * SCP_BL2_BASE undefined.
- * Return 0 on success or if there's no SCP_BL2 image to load, a negative error
- * code otherwise.
- ******************************************************************************/
-static int load_scp_bl2(void)
-{
-	int e = 0;
-#ifdef SCP_BL2_BASE
-	meminfo_t scp_bl2_mem_info;
-	image_info_t scp_bl2_image_info;
-
-	/*
-	 * It is up to the platform to specify where SCP_BL2 should be loaded if
-	 * it exists. It could create space in the secure sram or point to a
-	 * completely different memory.
-	 *
-	 * The entry point information is not relevant in this case as the AP
-	 * won't execute the SCP_BL2 image.
-	 */
-	INFO("BL2: Loading SCP_BL2\n");
-	bl2_plat_get_scp_bl2_meminfo(&scp_bl2_mem_info);
-	scp_bl2_image_info.h.version = VERSION_1;
-	e = load_auth_image(&scp_bl2_mem_info,
-			    SCP_BL2_IMAGE_ID,
-			    SCP_BL2_BASE,
-			    &scp_bl2_image_info,
-			    NULL);
-
-	if (e == 0) {
-		/* The subsequent handling of SCP_BL2 is platform specific */
-		e = bl2_plat_handle_scp_bl2(&scp_bl2_image_info);
-		if (e) {
-			ERROR("Failure in platform-specific handling of SCP_BL2 image.\n");
-		}
-	}
-#endif /* SCP_BL2_BASE */
-
-	return e;
-}
-
-#ifndef EL3_PAYLOAD_BASE
-/*******************************************************************************
- * Load the BL31 image.
- * The bl2_to_bl31_params and bl31_ep_info params will be updated with the
- * relevant BL31 information.
- * Return 0 on success, a negative error code otherwise.
- ******************************************************************************/
-static int load_bl31(bl31_params_t *bl2_to_bl31_params,
-		     entry_point_info_t *bl31_ep_info)
-{
-	meminfo_t *bl2_tzram_layout;
-	int e;
-
-	INFO("BL2: Loading BL31\n");
-	assert(bl2_to_bl31_params != NULL);
-	assert(bl31_ep_info != NULL);
-
-	/* Find out how much free trusted ram remains after BL2 load */
-	bl2_tzram_layout = bl2_plat_sec_mem_layout();
-
-	/* Set the X0 parameter to BL31 */
-	bl31_ep_info->args.arg0 = (unsigned long)bl2_to_bl31_params;
-
-	/* Load the BL31 image */
-	e = load_auth_image(bl2_tzram_layout,
-			    BL31_IMAGE_ID,
-			    BL31_BASE,
-			    bl2_to_bl31_params->bl31_image_info,
-			    bl31_ep_info);
-
-	if (e == 0) {
-		bl2_plat_set_bl31_ep_info(bl2_to_bl31_params->bl31_image_info,
-					  bl31_ep_info);
-	}
-
-	return e;
-}
-
-/*******************************************************************************
- * Load the BL32 image if there's one.
- * The bl2_to_bl31_params param will be updated with the relevant BL32
- * information.
- * If a platform does not want to attempt to load BL32 image it must leave
- * BL32_BASE undefined.
- * Return 0 on success or if there's no BL32 image to load, a negative error
- * code otherwise.
- ******************************************************************************/
-static int load_bl32(bl31_params_t *bl2_to_bl31_params)
-{
-	int e = 0;
-#ifdef BL32_BASE
-	meminfo_t bl32_mem_info;
-
-	INFO("BL2: Loading BL32\n");
-	assert(bl2_to_bl31_params != NULL);
-
-	/*
-	 * It is up to the platform to specify where BL32 should be loaded if
-	 * it exists. It could create space in the secure sram or point to a
-	 * completely different memory.
-	 */
-	bl2_plat_get_bl32_meminfo(&bl32_mem_info);
-	e = load_auth_image(&bl32_mem_info,
-			    BL32_IMAGE_ID,
-			    BL32_BASE,
-			    bl2_to_bl31_params->bl32_image_info,
-			    bl2_to_bl31_params->bl32_ep_info);
-
-	if (e == 0) {
-		bl2_plat_set_bl32_ep_info(
-			bl2_to_bl31_params->bl32_image_info,
-			bl2_to_bl31_params->bl32_ep_info);
-	}
-#endif /* BL32_BASE */
-
-	return e;
-}
-
-#ifndef PRELOADED_BL33_BASE
-/*******************************************************************************
- * Load the BL33 image.
- * The bl2_to_bl31_params param will be updated with the relevant BL33
- * information.
- * Return 0 on success, a negative error code otherwise.
- ******************************************************************************/
-static int load_bl33(bl31_params_t *bl2_to_bl31_params)
-{
-	meminfo_t bl33_mem_info;
-	int e;
-
-	INFO("BL2: Loading BL33\n");
-	assert(bl2_to_bl31_params != NULL);
-
-	bl2_plat_get_bl33_meminfo(&bl33_mem_info);
-
-	/* Load the BL33 image in non-secure memory provided by the platform */
-	e = load_auth_image(&bl33_mem_info,
-			    BL33_IMAGE_ID,
-			    plat_get_ns_image_entrypoint(),
-			    bl2_to_bl31_params->bl33_image_info,
-			    bl2_to_bl31_params->bl33_ep_info);
-
-	if (e == 0) {
-		bl2_plat_set_bl33_ep_info(bl2_to_bl31_params->bl33_image_info,
-					  bl2_to_bl31_params->bl33_ep_info);
-	}
-
-	return e;
-}
-#endif /* PRELOADED_BL33_BASE */
-
-#endif /* EL3_PAYLOAD_BASE */
 
 /*******************************************************************************
  * The only thing to do in BL2 is to load further images and pass control to
- * BL31. The memory occupied by BL2 will be reclaimed by BL3x stages. BL2 runs
- * entirely in S-EL1.
+ * next BL. The memory occupied by BL2 will be reclaimed by BL3x stages. BL2
+ * runs entirely in S-EL1.
  ******************************************************************************/
 void bl2_main(void)
 {
-	bl31_params_t *bl2_to_bl31_params;
-	entry_point_info_t *bl31_ep_info;
-	int e;
+	entry_point_info_t *next_bl_ep_info;
 
 	NOTICE("BL2: %s\n", version_string);
 	NOTICE("BL2: %s\n", build_message);
@@ -226,82 +57,13 @@
 	auth_mod_init();
 #endif /* TRUSTED_BOARD_BOOT */
 
-	/*
-	 * Load the subsequent bootloader images
-	 */
-	e = load_scp_bl2();
-	if (e) {
-		ERROR("Failed to load SCP_BL2 (%i)\n", e);
-		plat_error_handler(e);
-	}
-
-	/* Perform platform setup in BL2 after loading SCP_BL2 */
-	bl2_platform_setup();
+	/* Load the subsequent bootloader images. */
+	next_bl_ep_info = bl2_load_images();
 
 	/*
-	 * Get a pointer to the memory the platform has set aside to pass
-	 * information to BL31.
+	 * Run next BL image via an SMC to BL1. Information on how to pass
+	 * control to the BL32 (if present) and BL33 software images will
+	 * be passed to next BL image as an argument.
 	 */
-	bl2_to_bl31_params = bl2_plat_get_bl31_params();
-	bl31_ep_info = bl2_plat_get_bl31_ep_info();
-
-#ifdef EL3_PAYLOAD_BASE
-	/*
-	 * In the case of an EL3 payload, we don't need to load any further
-	 * images. Just update the BL31 entrypoint info structure to make BL1
-	 * jump to the EL3 payload.
-	 * The pointer to the memory the platform has set aside to pass
-	 * information to BL31 in the normal boot flow is reused here, even
-	 * though only a fraction of the information contained in the
-	 * bl31_params_t structure makes sense in the context of EL3 payloads.
-	 * This will be refined in the future.
-	 */
-	INFO("BL2: Populating the entrypoint info for the EL3 payload\n");
-	bl31_ep_info->pc = EL3_PAYLOAD_BASE;
-	bl31_ep_info->args.arg0 = (unsigned long) bl2_to_bl31_params;
-	bl2_plat_set_bl31_ep_info(NULL, bl31_ep_info);
-#else
-	e = load_bl31(bl2_to_bl31_params, bl31_ep_info);
-	if (e) {
-		ERROR("Failed to load BL31 (%i)\n", e);
-		plat_error_handler(e);
-	}
-
-	e = load_bl32(bl2_to_bl31_params);
-	if (e) {
-		if (e == -EAUTH) {
-			ERROR("Failed to authenticate BL32\n");
-			plat_error_handler(e);
-		} else {
-			WARN("Failed to load BL32 (%i)\n", e);
-		}
-	}
-
-#ifdef PRELOADED_BL33_BASE
-	/*
-	 * In this case, don't load the BL33 image as it's already loaded in
-	 * memory. Update BL33 entrypoint information.
-	 */
-	INFO("BL2: Populating the entrypoint info for the preloaded BL33\n");
-	bl2_to_bl31_params->bl33_ep_info->pc = PRELOADED_BL33_BASE;
-	bl2_plat_set_bl33_ep_info(NULL, bl2_to_bl31_params->bl33_ep_info);
-#else
-	e = load_bl33(bl2_to_bl31_params);
-	if (e) {
-		ERROR("Failed to load BL33 (%i)\n", e);
-		plat_error_handler(e);
-	}
-#endif /* PRELOADED_BL33_BASE */
-
-#endif /* EL3_PAYLOAD_BASE */
-
-	/* Flush the params to be passed to memory */
-	bl2_plat_flush_bl31_params();
-
-	/*
-	 * Run BL31 via an SMC to BL1. Information on how to pass control to
-	 * the BL32 (if present) and BL33 software images will be passed to
-	 * BL31 as an argument.
-	 */
-	smc(BL1_SMC_RUN_IMAGE, (unsigned long)bl31_ep_info, 0, 0, 0, 0, 0, 0);
+	smc(BL1_SMC_RUN_IMAGE, (unsigned long)next_bl_ep_info, 0, 0, 0, 0, 0, 0);
 }
diff --git a/bl2/bl2_private.h b/bl2/bl2_private.h
index 022d1e9..b339777 100644
--- a/bl2/bl2_private.h
+++ b/bl2/bl2_private.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2016, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -32,8 +32,14 @@
 #define __BL2_PRIVATE_H__
 
 /******************************************
+ * Forward declarations
+ *****************************************/
+struct entry_point_info;
+
+/******************************************
  * Function prototypes
  *****************************************/
 void bl2_arch_setup(void);
+struct entry_point_info *bl2_load_images(void);
 
 #endif /* __BL2_PRIVATE_H__ */