diff --git a/Makefile b/Makefile
index 9d1e945..59d14ba 100644
--- a/Makefile
+++ b/Makefile
@@ -529,6 +529,10 @@
         ifneq ($(ARM_BL2_SP_LIST_DTS),)
             DTC_CPPFLAGS += -DARM_BL2_SP_LIST_DTS=$(ARM_BL2_SP_LIST_DTS)
         endif
+
+        ifneq ($(SP_LAYOUT_FILE),)
+            BL2_ENABLE_SP_LOAD := 1
+        endif
     else
         # All other SPDs in spd directory
         SPD_DIR := spd
@@ -902,6 +906,7 @@
 $(eval $(call assert_booleans,\
     $(sort \
         ALLOW_RO_XLAT_TABLES \
+        BL2_ENABLE_SP_LOAD \
         COLD_BOOT_SINGLE_CPU \
         CREATE_KEYS \
         CTX_INCLUDE_AARCH32_REGS \
@@ -971,6 +976,7 @@
         ENABLE_TRBE_FOR_NS \
         ENABLE_SYS_REG_TRACE_FOR_NS \
         ENABLE_TRF_FOR_NS \
+        ENABLE_FEAT_HCX \
 )))
 
 $(eval $(call assert_numerics,\
@@ -1002,6 +1008,7 @@
         ALLOW_RO_XLAT_TABLES \
         ARM_ARCH_MAJOR \
         ARM_ARCH_MINOR \
+        BL2_ENABLE_SP_LOAD \
         COLD_BOOT_SINGLE_CPU \
         CTX_INCLUDE_AARCH32_REGS \
         CTX_INCLUDE_FPREGS \
@@ -1074,6 +1081,7 @@
         ENABLE_TRBE_FOR_NS \
         ENABLE_SYS_REG_TRACE_FOR_NS \
         ENABLE_TRF_FOR_NS \
+        ENABLE_FEAT_HCX \
 )))
 
 ifeq (${SANITIZE_UB},trap)
@@ -1103,9 +1111,6 @@
 # Generate and include sp_gen.mk if SPD is spmd and SP_LAYOUT_FILE is defined
 ifeq (${SPD},spmd)
 ifdef SP_LAYOUT_FILE
-        ifeq (${SPMD_SPM_AT_SEL2},0)
-            $(error "SPMD with SPM at S-EL1 does not require SP_LAYOUT_FILE")
-        endif
         -include $(BUILD_PLAT)/sp_gen.mk
         FIP_DEPS += sp
         CRT_DEPS += sp
diff --git a/bl1/bl1.mk b/bl1/bl1.mk
index d11b4ab..8f44151 100644
--- a/bl1/bl1.mk
+++ b/bl1/bl1.mk
@@ -1,15 +1,17 @@
 #
-# Copyright (c) 2013-2020, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2013-2021, ARM Limited and Contributors. All rights reserved.
 #
 # SPDX-License-Identifier: BSD-3-Clause
 #
 
-BL1_SOURCES		+=	bl1/bl1_main.c				\
-				bl1/${ARCH}/bl1_arch_setup.c		\
+ifneq (${PLAT},fvp_r)
+BL1_SOURCES		+=	bl1/${ARCH}/bl1_arch_setup.c		\
 				bl1/${ARCH}/bl1_context_mgmt.c		\
 				bl1/${ARCH}/bl1_entrypoint.S		\
 				bl1/${ARCH}/bl1_exceptions.S		\
-				lib/cpus/${ARCH}/cpu_helpers.S		\
+				bl1/bl1_main.c
+endif
+BL1_SOURCES		+=	lib/cpus/${ARCH}/cpu_helpers.S		\
 				lib/cpus/errata_report.c		\
 				lib/el3_runtime/${ARCH}/context_mgmt.c	\
 				plat/common/plat_bl1_common.c		\
diff --git a/bl31/bl31_main.c b/bl31/bl31_main.c
index 44bf32c..f272af5 100644
--- a/bl31/bl31_main.c
+++ b/bl31/bl31_main.c
@@ -85,6 +85,15 @@
 	/* Perform late platform-specific setup */
 	bl31_plat_arch_setup();
 
+#if ENABLE_FEAT_HCX
+	/*
+	 * Assert that FEAT_HCX is supported on this system, without this check
+	 * an exception would occur during context save/restore if enabled but
+	 * not supported.
+	 */
+	assert(is_feat_hcx_present());
+#endif /* ENABLE_FEAT_HCX */
+
 #if CTX_INCLUDE_PAUTH_REGS
 	/*
 	 * Assert that the ARMv8.3-PAuth registers are present or an access
diff --git a/docs/components/secure-partition-manager.rst b/docs/components/secure-partition-manager.rst
index f6a8828..fa51fe0 100644
--- a/docs/components/secure-partition-manager.rst
+++ b/docs/components/secure-partition-manager.rst
@@ -414,13 +414,17 @@
 
 The SPMC is loaded by BL2 as the BL32 image.
 
-The SPMC manifest is loaded by BL2 as the ``TOS_FW_CONFIG`` image.
+The SPMC manifest is loaded by BL2 as the ``TOS_FW_CONFIG`` image `[9]`_.
 
 BL2 passes the SPMC manifest address to BL31 through a register.
 
 At boot time, the SPMD in BL31 runs from the primary core, initializes the core
-contexts and launches the SPMC (BL32) passing the SPMC manifest address through
-a register.
+contexts and launches the SPMC (BL32) passing the following information through
+registers:
+
+- X0 holds the ``TOS_FW_CONFIG`` physical address (or SPMC manifest blob).
+- X1 holds the ``HW_CONFIG`` physical address.
+- X4 holds the currently running core linear id.
 
 Loading of SPs
 ~~~~~~~~~~~~~~
@@ -951,6 +955,10 @@
 
 [8] https://lists.trustedfirmware.org/pipermail/tf-a/2020-February/000296.html
 
+.. _[9]:
+
+[9] https://trustedfirmware-a.readthedocs.io/en/latest/design/firmware-design.html#dynamic-configuration-during-cold-boot
+
 --------------
 
 *Copyright (c) 2020-2021, Arm Limited and Contributors. All rights reserved.*
diff --git a/docs/components/xlat-tables-lib-v2-design.rst b/docs/components/xlat-tables-lib-v2-design.rst
index af5151f..cac32f5 100644
--- a/docs/components/xlat-tables-lib-v2-design.rst
+++ b/docs/components/xlat-tables-lib-v2-design.rst
@@ -10,7 +10,7 @@
 More specifically, some use cases that this library aims to support are:
 
 #. Statically allocate translation tables and populate them (at run-time) based
-   on a description of the memory layout. The memory layout is typically
+   upon a description of the memory layout. The memory layout is typically
    provided by the platform port as a list of memory regions;
 
 #. Support for generating translation tables pertaining to a different
@@ -26,22 +26,28 @@
 #. Support for changing memory attributes of memory regions at run-time.
 
 
-About version 1 and version 2
------------------------------
+About version 1, version 2 and MPU libraries
+--------------------------------------------
 
 This document focuses on version 2 of the library, whose sources are available
 in the ``lib/xlat_tables_v2`` directory. Version 1 of the library can still be
 found in ``lib/xlat_tables`` directory but it is less flexible and doesn't
-support dynamic mapping. Although potential bug fixes will be applied to both
-versions, future features enhancements will focus on version 2 and might not be
-back-ported to version 1. Therefore, it is recommended to use version 2,
-especially for new platform ports.
+support dynamic mapping. ``lib/xlat_mpu``, which configures Arm's MPU
+equivalently, is also addressed here. The ``lib/xlat_mpu`` is experimental,
+meaning that its API may change. It currently strives for consistency and
+code-reuse with xlat_tables_v2.  Future versions may be more MPU-specific (e.g.,
+removing all mentions of virtual addresses). Although potential bug fixes will
+be applied to all versions of the xlat_* libs, future feature enhancements will
+focus on version 2 and might not be back-ported to version 1 and MPU versions.
+Therefore, it is recommended to use version 2, especially for new platform
+ports (unless the platform uses an MPU).
 
-However, please note that version 2 is still in active development and is not
-considered stable yet. Hence, compatibility breaks might be introduced.
+However, please note that version 2 and the MPU version are still in active
+development and is not considered stable yet. Hence, compatibility breaks might
+be introduced.
 
 From this point onwards, this document will implicitly refer to version 2 of the
-library.
+library, unless stated otherwise.
 
 
 Design concepts and interfaces
@@ -102,6 +108,16 @@
 library will choose the mapping granularity for this region as it sees fit (more
 details can be found in `The memory mapping algorithm`_ section below).
 
+The MPU library also uses ``struct mmap_region`` to specify translations, but
+the MPU's translations are limited to specification of valid addresses and
+access permissions.  If the requested virtual and physical addresses mismatch
+the system will panic. Being register-based for deterministic memory-reference
+timing, the MPU hardware does not involve memory-resident translation tables.
+
+Currently, the MPU library is also limited to MPU translation at EL2 with no
+MMU translation at other ELs.  These limitations, however, are expected to be
+overcome in future library versions.
+
 Translation Context
 ~~~~~~~~~~~~~~~~~~~
 
@@ -215,7 +231,8 @@
 The ``MAP_REGION()`` and ``MAP_REGION_FLAT()`` macros do not allow specifying a
 mapping granularity, which leaves the library implementation free to choose
 it. However, in cases where a specific granularity is required, the
-``MAP_REGION2()`` macro might be used instead.
+``MAP_REGION2()`` macro might be used instead. Using ``MAP_REGION_FLAT()`` only
+to define regions for the MPU library is strongly recommended.
 
 As explained earlier in this document, when the dynamic mapping feature is
 disabled, there is no notion of dynamic regions. Conceptually, there are only
@@ -374,6 +391,9 @@
 refer to the comments in the source code of the core module for more details
 about the sorting algorithm in use.
 
+This mapping algorithm does not apply to the MPU library, since the MPU hardware
+directly maps regions by "base" and "limit" (bottom and top) addresses.
+
 TLB maintenance operations
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -390,6 +410,11 @@
 is deferred to the ``enable_mmu*()`` family of functions, just before the MMU is
 turned on.
 
+Regarding enabling and disabling memory management, for the MPU library, to
+reduce confusion, calls to enable or disable the MPU use ``mpu`` in their names
+in place of ``mmu``. For example, the ``enable_mmu_el2()`` call is changed to
+``enable_mpu_el2()``.
+
 TLB invalidation is not required when adding dynamic regions either. Dynamic
 regions are not allowed to overlap existing memory region. Therefore, if the
 dynamic mapping request is deemed legitimate, it automatically concerns memory
@@ -412,6 +437,6 @@
 
 --------------
 
-*Copyright (c) 2017-2019, Arm Limited and Contributors. All rights reserved.*
+*Copyright (c) 2017-2021, Arm Limited and Contributors. All rights reserved.*
 
 .. |Alignment Example| image:: ../resources/diagrams/xlat_align.png
diff --git a/docs/design/cpu-specific-build-macros.rst b/docs/design/cpu-specific-build-macros.rst
index bde6d97..80e7821 100644
--- a/docs/design/cpu-specific-build-macros.rst
+++ b/docs/design/cpu-specific-build-macros.rst
@@ -389,6 +389,10 @@
    Cortex-A710 CPU. This needs to be enabled for revisions r0p0, r1p0 and r2p0
    of the CPU and is still open.
 
+-  ``ERRATA_A710_2083908``: This applies errata 2083908 workaround to
+   Cortex-A710 CPU. This needs to be enabled for revision r2p0 of the CPU and
+   is still open.
+
 For Neoverse N2, the following errata build flags are defined :
 
 -  ``ERRATA_N2_2067956``: This applies errata 2067956 workaround to Neoverse-N2
diff --git a/docs/getting_started/build-options.rst b/docs/getting_started/build-options.rst
index 115b2b2..7fe6ccd 100644
--- a/docs/getting_started/build-options.rst
+++ b/docs/getting_started/build-options.rst
@@ -55,6 +55,9 @@
 -  ``BL2_AT_EL3``: This is an optional build option that enables the use of
    BL2 at EL3 execution level.
 
+-  ``BL2_ENABLE_SP_LOAD``: Boolean option to enable loading SP packages from the
+   FIP. Automatically enabled if ``SP_LAYOUT_FILE`` is provided.
+
 -  ``BL2_IN_XIP_MEM``: In some use-cases BL2 will be stored in eXecute In Place
    (XIP) memory, like BL1. In these use-cases, it is necessary to initialize
    the RW sections in RAM, while leaving the RO sections in place. This option
@@ -235,6 +238,10 @@
    builds, but this behaviour can be overridden in each platform's Makefile or
    in the build command line.
 
+-  ``ENABLE_FEAT_HCX``: This option sets the bit SCR_EL3.HXEn in EL3 to allow
+   access to HCRX_EL2 (extended hypervisor control register) from EL2 as well as
+   adding HCRX_EL2 to the EL2 context save/restore operations.
+
 -  ``ENABLE_LTO``: Boolean option to enable Link Time Optimization (LTO)
    support in GCC for TF-A. This option is currently only supported for
    AArch64. Default is 0.
diff --git a/docs/plat/arm/fvp_r/index.rst b/docs/plat/arm/fvp_r/index.rst
new file mode 100644
index 0000000..8af16ba
--- /dev/null
+++ b/docs/plat/arm/fvp_r/index.rst
@@ -0,0 +1,46 @@
+ARM V8-R64 Fixed Virtual Platform (FVP)
+=======================================
+
+Some of the features of Armv8-R AArch64 FVP platform referenced in Trusted
+Boot R-class include:
+
+- Secure World Support Only
+- EL2 as Maximum EL support (No EL3)
+- MPU Support only at EL2
+- MPU or MMU Support at EL0/EL1
+- AArch64 Support Only
+- Trusted Board Boot
+
+Further information on v8-R64 FVP is available at `info <https://developer.arm.com/documentation/ddi0600/latest/>`_
+
+Boot Sequence
+-------------
+
+BL1 –> BL33
+
+The execution begins from BL1 which loads the BL33 image, a boot-wrapped (bootloader + Operating System)
+Operating System, from FIP to DRAM.
+
+Build Procedure
+~~~~~~~~~~~~~~~
+
+-  Obtain arm `toolchain <https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads>`_.
+   Set the CROSS_COMPILE environment variable to point to the toolchain folder.
+
+-  Build TF-A:
+
+   .. code:: shell
+
+      make PLAT=fvp_r BL33=<path_to_os.bin> all fip
+
+   Enable TBBR by adding the following options to the make command:
+
+   .. code:: shell
+
+      MBEDTLS_DIR=<path_to_mbedtls_directory>  \
+      TRUSTED_BOARD_BOOT=1 \
+      GENERATE_COT=1 \
+      ARM_ROTPK_LOCATION=devel_rsa  \
+      ROT_KEY=plat/arm/board/common/rotpk/arm_rotprivk_rsa.pem
+
+*Copyright (c) 2021, Arm Limited. All rights reserved.*
diff --git a/docs/plat/arm/index.rst b/docs/plat/arm/index.rst
index c834f6a..f262dc0 100644
--- a/docs/plat/arm/index.rst
+++ b/docs/plat/arm/index.rst
@@ -7,6 +7,7 @@
 
    juno/index
    fvp/index
+   fvp_r/index
    fvp-ve/index
    tc/index
    arm_fpga/index
@@ -20,4 +21,4 @@
 
 --------------
 
-*Copyright (c) 2021, Arm Limited. All rights reserved.*
+*Copyright (c) 2019-2021, Arm Limited. All rights reserved.*
diff --git a/docs/plat/nxp/nxp-layerscape.rst b/docs/plat/nxp/nxp-layerscape.rst
index 3d98354..9a470e6 100644
--- a/docs/plat/nxp/nxp-layerscape.rst
+++ b/docs/plat/nxp/nxp-layerscape.rst
@@ -5,22 +5,62 @@
 
 The QorIQ family of ARM based SoCs that are supported on TF-A are:
 
-1. LX2160ARDB:
-        Platform Name:
+1. LX2160A
 
-        a. lx2160ardb (Board details can be fetched from the link: `lx2160ardb`_)
+- SoC Overview:
 
+The LX2160A multicore processor, the highest-performance member of the
+Layerscape family, combines FinFET process technology's low power and
+sixteen Arm® Cortex®-A72 cores with datapath acceleration optimized for
+L2/3 packet processing, together with security offload, robust traffic
+management and quality of service.
+
+Details about LX2160A can be found at `lx2160a`_.
+
+- LX2160ARDB Board:
+
+The LX2160A reference design board provides a comprehensive platform
+that enables design and evaluation of the LX2160A or LX2162A processors. It
+comes preloaded with a board support package (BSP) based on a standard Linux
+kernel.
+
+Board details can be fetched from the link: `lx2160ardb`_.
+
+2. LS1028A
+
+- SoC Overview:
+
+The Layerscape LS1028A applications processor for industrial and
+automotive includes a time-sensitive networking (TSN) -enabled Ethernet
+switch and Ethernet controllers to support converged IT and OT networks.
+Two powerful 64-bit Arm®v8 cores support real-time processing for
+industrial control and virtual machines for edge computing in the IoT.
+The integrated GPU and LCD controller enable Human-Machine Interface
+(HMI) systems with next-generation interfaces.
+
+Details about LS1028A can be found at `ls1028a`_.
+
+- LS1028ARDB Boards:
+
+The LS1028A reference design board (RDB) is a computing, evaluation,
+and development platform that supports industrial IoT applications, human
+machine interface solutions, and industrial networking.
+
+Details about LS1028A RDB board can be found at `ls1028ardb`_.
 
 Table of supported boot-modes by each platform & platform that needs FIP-DDR:
 -----------------------------------------------------------------------------
 
-+---+-----------------+-------+--------+-------+-------+-------+-------------+--------------+-----------------+
-|   |     BOOT_MODE-->|  sd   |  qspi  |  nor  | nand  | emmc  | flexspi_nor | flexspi_nand | fip_ddr needed  |
-|   |                 |       |        |       |       |       |             |              |                 |
-|   |     PLAT        |       |        |       |       |       |             |              |                 |
-+===+=================+=======+========+=======+=======+=======+=============+==============+=================+
-| 1.| lx2160ardb      |  yes  |        |       |       |  yes  |   yes       |              |       yes       |
-+---+-----------------+-------+--------+-------+-------+-------+-------------+--------------+-----------------+
++---------------------+---------------------------------------------------------------------+-----------------+
+|                     |                            BOOT_MODE                                |                 |
+|       PLAT          +-------+--------+-------+-------+-------+-------------+--------------+ fip_ddr_needed  |
+|                     |  sd   |  qspi  |  nor  | nand  | emmc  | flexspi_nor | flexspi_nand |                 |
++=====================+=======+========+=======+=======+=======+=============+==============+=================+
+|     lx2160ardb      |  yes  |        |       |       |  yes  |   yes       |              |       yes       |
++---------------------+-------+--------+-------+-------+-------+-------------+--------------+-----------------+
+|     ls1028ardb      |  yes  |        |       |       |  yes  |   yes       |              |       no        |
++---------------------+-------+--------+-------+-------+-------+-------------+--------------+-----------------+
+
 
 Boot Sequence
 -------------
@@ -54,6 +94,32 @@
 + EL3     BootROM --> BL2 -----> BL31 ---------------/
 +
 
+DDR Memory Layout
+--------------------------
+
+NXP Platforms divide DRAM into banks:
+
+- DRAM0 Bank:  Maximum size of this bank is fixed to 2GB, DRAM0 size is defined in platform_def.h if it is less than 2GB.
+
+- DRAM1 ~ DRAMn Bank:  Greater than 2GB belongs to DRAM1 and following banks, and size of DRAMn Bank varies for one platform to others.
+
+The following diagram is default DRAM0 memory layout in which secure memory is at top of DRAM0.
+
+::
+
+  high  +---------------------------------------------+
+        |                                             |
+        |   Secure EL1 Payload Shared Memory (2 MB)   |
+        |                                             |
+        +---------------------------------------------+
+        |                                             |
+        |            Secure Memory (64 MB)            |
+        |                                             |
+        +---------------------------------------------+
+        |                                             |
+        |             Non Secure Memory               |
+        |                                             |
+  low   +---------------------------------------------+
 
 How to build
 =============
@@ -228,5 +294,8 @@
 Refer `nxp-ls-tbbr.rst`_ for detailed user steps.
 
 
+.. _lx2160a: https://www.nxp.com/products/processors-and-microcontrollers/arm-processors/layerscape-processors/layerscape-lx2160a-lx2120a-lx2080a-processors:LX2160A
 .. _lx2160ardb: https://www.nxp.com/products/processors-and-microcontrollers/arm-processors/layerscape-communication-process/layerscape-lx2160a-multicore-communications-processor:LX2160A
+.. _ls1028a: https://www.nxp.com/products/processors-and-microcontrollers/arm-processors/layerscape-processors/layerscape-1028a-applications-processor:LS1028A
+.. _ls1028ardb: https://www.nxp.com/design/qoriq-developer-resources/layerscape-ls1028a-reference-design-board:LS1028ARDB
 .. _nxp-ls-tbbr.rst: ./nxp-ls-tbbr.rst
diff --git a/drivers/auth/tbbr/tbbr_cot_bl1_r64.c b/drivers/auth/tbbr/tbbr_cot_bl1_r64.c
new file mode 100644
index 0000000..e8e017c
--- /dev/null
+++ b/drivers/auth/tbbr/tbbr_cot_bl1_r64.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stddef.h>
+
+#include <drivers/auth/auth_mod.h>
+#include <drivers/auth/mbedtls/mbedtls_config.h>
+#include <drivers/auth/tbbr_cot_common.h>
+
+#if USE_TBBR_DEFS
+#include <tools_share/tbbr_oid.h>
+#else
+#include <platform_oid.h>
+#endif
+#include <platform_def.h>
+
+
+static unsigned char trusted_world_pk_buf[PK_DER_LEN];
+static unsigned char non_trusted_world_pk_buf[PK_DER_LEN];
+static unsigned char content_pk_buf[PK_DER_LEN];
+static unsigned char nt_fw_config_hash_buf[HASH_DER_LEN];
+
+static auth_param_type_desc_t non_trusted_nv_ctr = AUTH_PARAM_TYPE_DESC(
+		AUTH_PARAM_NV_CTR, NON_TRUSTED_FW_NVCOUNTER_OID);
+static auth_param_type_desc_t trusted_world_pk = AUTH_PARAM_TYPE_DESC(
+		AUTH_PARAM_PUB_KEY, TRUSTED_WORLD_PK_OID);
+static auth_param_type_desc_t non_trusted_world_pk = AUTH_PARAM_TYPE_DESC(
+		AUTH_PARAM_PUB_KEY, NON_TRUSTED_WORLD_PK_OID);
+static auth_param_type_desc_t nt_fw_content_pk = AUTH_PARAM_TYPE_DESC(
+		AUTH_PARAM_PUB_KEY, NON_TRUSTED_FW_CONTENT_CERT_PK_OID);
+static auth_param_type_desc_t nt_world_bl_hash = AUTH_PARAM_TYPE_DESC(
+		AUTH_PARAM_HASH, NON_TRUSTED_WORLD_BOOTLOADER_HASH_OID);
+static auth_param_type_desc_t nt_fw_config_hash = AUTH_PARAM_TYPE_DESC(
+		AUTH_PARAM_HASH, NON_TRUSTED_FW_CONFIG_HASH_OID);
+/*
+ * Trusted key certificate
+ */
+static const auth_img_desc_t trusted_key_cert = {
+	.img_id = TRUSTED_KEY_CERT_ID,
+	.img_type = IMG_CERT,
+	.parent = NULL,
+	.img_auth_methods = (const auth_method_desc_t[AUTH_METHOD_NUM]) {
+		[0] = {
+			.type = AUTH_METHOD_SIG,
+			.param.sig = {
+				.pk = &subject_pk,
+				.sig = &sig,
+				.alg = &sig_alg,
+				.data = &raw_data
+			}
+		},
+		[1] = {
+			.type = AUTH_METHOD_NV_CTR,
+			.param.nv_ctr = {
+				.cert_nv_ctr = &trusted_nv_ctr,
+				.plat_nv_ctr = &trusted_nv_ctr
+			}
+		}
+	},
+	.authenticated_data = (const auth_param_desc_t[COT_MAX_VERIFIED_PARAMS]) {
+		[0] = {
+			.type_desc = &trusted_world_pk,
+			.data = {
+				.ptr = (void *)trusted_world_pk_buf,
+				.len = (unsigned int)PK_DER_LEN
+			}
+		},
+		[1] = {
+			.type_desc = &non_trusted_world_pk,
+			.data = {
+				.ptr = (void *)non_trusted_world_pk_buf,
+				.len = (unsigned int)PK_DER_LEN
+			}
+		}
+	}
+};
+/*
+ * Non-Trusted Firmware
+ */
+static const auth_img_desc_t non_trusted_fw_key_cert = {
+	.img_id = NON_TRUSTED_FW_KEY_CERT_ID,
+	.img_type = IMG_CERT,
+	.parent = &trusted_key_cert,
+	.img_auth_methods = (const auth_method_desc_t[AUTH_METHOD_NUM]) {
+		[0] = {
+			.type = AUTH_METHOD_SIG,
+			.param.sig = {
+				.pk = &non_trusted_world_pk,
+				.sig = &sig,
+				.alg = &sig_alg,
+				.data = &raw_data
+			}
+		},
+		[1] = {
+			.type = AUTH_METHOD_NV_CTR,
+			.param.nv_ctr = {
+				.cert_nv_ctr = &non_trusted_nv_ctr,
+				.plat_nv_ctr = &non_trusted_nv_ctr
+			}
+		}
+	},
+	.authenticated_data = (const auth_param_desc_t[COT_MAX_VERIFIED_PARAMS]) {
+		[0] = {
+			.type_desc = &nt_fw_content_pk,
+			.data = {
+				.ptr = (void *)content_pk_buf,
+				.len = (unsigned int)PK_DER_LEN
+			}
+		}
+	}
+};
+static const auth_img_desc_t non_trusted_fw_content_cert = {
+	.img_id = NON_TRUSTED_FW_CONTENT_CERT_ID,
+	.img_type = IMG_CERT,
+	.parent = &non_trusted_fw_key_cert,
+	.img_auth_methods = (const auth_method_desc_t[AUTH_METHOD_NUM]) {
+		[0] = {
+			.type = AUTH_METHOD_SIG,
+			.param.sig = {
+				.pk = &nt_fw_content_pk,
+				.sig = &sig,
+				.alg = &sig_alg,
+				.data = &raw_data
+			}
+		},
+		[1] = {
+			.type = AUTH_METHOD_NV_CTR,
+			.param.nv_ctr = {
+				.cert_nv_ctr = &non_trusted_nv_ctr,
+				.plat_nv_ctr = &non_trusted_nv_ctr
+			}
+		}
+	},
+	.authenticated_data = (const auth_param_desc_t[COT_MAX_VERIFIED_PARAMS]) {
+		[0] = {
+			.type_desc = &nt_world_bl_hash,
+			.data = {
+				.ptr = (void *)nt_world_bl_hash_buf,
+				.len = (unsigned int)HASH_DER_LEN
+			}
+		},
+		[1] = {
+			.type_desc = &nt_fw_config_hash,
+			.data = {
+				.ptr = (void *)nt_fw_config_hash_buf,
+				.len = (unsigned int)HASH_DER_LEN
+			}
+		}
+	}
+};
+static const auth_img_desc_t bl33_image = {
+	.img_id = BL33_IMAGE_ID,
+	.img_type = IMG_RAW,
+	.parent = &non_trusted_fw_content_cert,
+	.img_auth_methods = (const auth_method_desc_t[AUTH_METHOD_NUM]) {
+		[0] = {
+			.type = AUTH_METHOD_HASH,
+			.param.hash = {
+				.data = &raw_data,
+				.hash = &nt_world_bl_hash
+			}
+		}
+	}
+};
+
+static const auth_img_desc_t * const cot_desc[] = {
+	[TRUSTED_KEY_CERT_ID]			=	&trusted_key_cert,
+	[NON_TRUSTED_FW_KEY_CERT_ID]		=	&non_trusted_fw_key_cert,
+	[NON_TRUSTED_FW_CONTENT_CERT_ID]	=	&non_trusted_fw_content_cert,
+	[BL33_IMAGE_ID]				=	&bl33_image,
+};
+
+/* Register the CoT in the authentication module */
+REGISTER_COT(cot_desc);
diff --git a/drivers/marvell/comphy/phy-comphy-3700.c b/drivers/marvell/comphy/phy-comphy-3700.c
index 027d07d..0ad14a8 100644
--- a/drivers/marvell/comphy/phy-comphy-3700.c
+++ b/drivers/marvell/comphy/phy-comphy-3700.c
@@ -118,7 +118,7 @@
 };
 
 /* PHY selector configures with corresponding modes */
-static void mvebu_a3700_comphy_set_phy_selector(uint8_t comphy_index,
+static int mvebu_a3700_comphy_set_phy_selector(uint8_t comphy_index,
 						uint32_t comphy_mode)
 {
 	uint32_t reg;
@@ -168,9 +168,10 @@
 	}
 
 	mmio_write_32(MVEBU_COMPHY_REG_BASE + COMPHY_SELECTOR_PHY_REG, reg);
-	return;
+	return 0;
 error:
 	ERROR("COMPHY[%d] mode[%d] is invalid\n", comphy_index, mode);
+	return -EINVAL;
 }
 
 /*
@@ -214,7 +215,7 @@
 
 /* It is only used for SATA and USB3 on comphy lane2. */
 static void comphy_set_indirect(uintptr_t addr, uint32_t offset, uint16_t data,
-				uint16_t mask, int mode)
+				uint16_t mask, bool is_sata)
 {
 	/*
 	 * When Lane 2 PHY is for USB3, access the PHY registers
@@ -224,27 +225,38 @@
 	 * within the SATA Host Controller registers, Lane 2 base register
 	 * offset is 0x200
 	 */
-	if (mode == COMPHY_UNUSED)
-		return;
-
-	if (mode == COMPHY_SATA_MODE)
+	if (is_sata) {
 		mmio_write_32(addr + COMPHY_LANE2_INDIR_ADDR_OFFSET, offset);
-	else
+	} else {
 		mmio_write_32(addr + COMPHY_LANE2_INDIR_ADDR_OFFSET,
 			      offset + USB3PHY_LANE2_REG_BASE_OFFSET);
+	}
 
 	reg_set(addr + COMPHY_LANE2_INDIR_DATA_OFFSET, data, mask);
 }
 
-/* It is only used USB3 direct access not on comphy lane2. */
+/* It is only used for SATA on comphy lane2. */
+static void comphy_sata_set_indirect(uintptr_t addr, uint32_t reg_offset,
+				     uint16_t data, uint16_t mask)
+{
+	comphy_set_indirect(addr, reg_offset, data, mask, true);
+}
+
+/* It is only used for USB3 indirect access on comphy lane2. */
+static void comphy_usb3_set_indirect(uintptr_t addr, uint32_t reg_offset,
+				     uint16_t data, uint16_t mask)
+{
+	comphy_set_indirect(addr, reg_offset, data, mask, false);
+}
+
+/* It is only used for USB3 direct access not on comphy lane2. */
 static void comphy_usb3_set_direct(uintptr_t addr, uint32_t reg_offset,
-				   uint16_t data, uint16_t mask, int mode)
+				   uint16_t data, uint16_t mask)
 {
 	reg_set16((reg_offset * PHY_SHFT(USB3) + addr), data, mask);
 }
 
-static void comphy_sgmii_phy_init(uint32_t comphy_index, uint32_t mode,
-				  uintptr_t sd_ip_addr)
+static void comphy_sgmii_phy_init(uintptr_t sd_ip_addr, bool is_1gbps)
 {
 	const int fix_arr_sz = ARRAY_SIZE(sgmii_phy_init_fix);
 	int addr, fix_idx;
@@ -259,8 +271,7 @@
 		 * comparison to 3.125 Gbps values. These register values are
 		 * stored in "sgmii_phy_init_fix" array.
 		 */
-		if ((mode != COMPHY_SGMII_MODE) &&
-		    (sgmii_phy_init_fix[fix_idx].addr == addr)) {
+		if (!is_1gbps && sgmii_phy_init_fix[fix_idx].addr == addr) {
 			/* Use new value */
 			val = sgmii_phy_init_fix[fix_idx].value;
 			if (fix_idx < fix_arr_sz)
@@ -276,21 +287,22 @@
 static int mvebu_a3700_comphy_sata_power_on(uint8_t comphy_index,
 					    uint32_t comphy_mode)
 {
-	int ret = 0;
+	int ret;
 	uint32_t offset, data = 0, ref_clk;
 	uintptr_t comphy_indir_regs = COMPHY_INDIRECT_REG;
-	int mode = COMPHY_GET_MODE(comphy_mode);
 	int invert = COMPHY_GET_POLARITY_INVERT(comphy_mode);
 
 	debug_enter();
 
 	/* Configure phy selector for SATA */
-	mvebu_a3700_comphy_set_phy_selector(comphy_index, comphy_mode);
+	ret = mvebu_a3700_comphy_set_phy_selector(comphy_index, comphy_mode);
+	if (ret) {
+		return ret;
+	}
 
 	/* Clear phy isolation mode to make it work in normal mode */
 	offset =  COMPHY_ISOLATION_CTRL_REG + SATAPHY_LANE2_REG_BASE_OFFSET;
-	comphy_set_indirect(comphy_indir_regs, offset, 0, PHY_ISOLATE_MODE,
-			    mode);
+	comphy_sata_set_indirect(comphy_indir_regs, offset, 0, PHY_ISOLATE_MODE);
 
 	/* 0. Check the Polarity invert bits */
 	if (invert & COMPHY_POLARITY_TXD_INVERT)
@@ -299,13 +311,13 @@
 		data |= RXD_INVERT_BIT;
 
 	offset = COMPHY_SYNC_PATTERN_REG + SATAPHY_LANE2_REG_BASE_OFFSET;
-	comphy_set_indirect(comphy_indir_regs, offset, data, TXD_INVERT_BIT |
-			    RXD_INVERT_BIT, mode);
+	comphy_sata_set_indirect(comphy_indir_regs, offset, data, TXD_INVERT_BIT |
+				 RXD_INVERT_BIT);
 
 	/* 1. Select 40-bit data width width */
 	offset = COMPHY_LOOPBACK_REG0 + SATAPHY_LANE2_REG_BASE_OFFSET;
-	comphy_set_indirect(comphy_indir_regs, offset, DATA_WIDTH_40BIT,
-			    SEL_DATA_WIDTH_MASK, mode);
+	comphy_sata_set_indirect(comphy_indir_regs, offset, DATA_WIDTH_40BIT,
+				 SEL_DATA_WIDTH_MASK);
 
 	/* 2. Select reference clock(25M) and PHY mode (SATA) */
 	offset = COMPHY_POWER_PLL_CTRL + SATAPHY_LANE2_REG_BASE_OFFSET;
@@ -314,17 +326,17 @@
 	else
 		ref_clk = REF_CLOCK_SPEED_25M;
 
-	comphy_set_indirect(comphy_indir_regs, offset, ref_clk | PHY_MODE_SATA,
-			    REF_FREF_SEL_MASK | PHY_MODE_MASK, mode);
+	comphy_sata_set_indirect(comphy_indir_regs, offset, ref_clk | PHY_MODE_SATA,
+				 REF_FREF_SEL_MASK | PHY_MODE_MASK);
 
 	/* 3. Use maximum PLL rate (no power save) */
 	offset = COMPHY_KVCO_CAL_CTRL + SATAPHY_LANE2_REG_BASE_OFFSET;
-	comphy_set_indirect(comphy_indir_regs, offset, USE_MAX_PLL_RATE_BIT,
-			    USE_MAX_PLL_RATE_BIT, mode);
+	comphy_sata_set_indirect(comphy_indir_regs, offset, USE_MAX_PLL_RATE_BIT,
+				 USE_MAX_PLL_RATE_BIT);
 
 	/* 4. Reset reserved bit */
-	comphy_set_indirect(comphy_indir_regs, COMPHY_RESERVED_REG, 0,
-			    PHYCTRL_FRM_PIN_BIT, mode);
+	comphy_sata_set_indirect(comphy_indir_regs, COMPHY_RESERVED_REG, 0,
+				 PHYCTRL_FRM_PIN_BIT);
 
 	/* 5. Set vendor-specific configuration (It is done in sata driver) */
 	/* XXX: in U-Boot below sequence was executed in this place, in Linux
@@ -346,17 +358,21 @@
 				   COMPHY_LANE2_INDIR_DATA_OFFSET,
 				   PLL_READY_TX_BIT, PLL_READY_TX_BIT,
 				   COMPHY_PLL_TIMEOUT, REG_32BIT);
+	if (ret) {
+		return -ETIMEDOUT;
+	}
 
 	debug_exit();
 
-	return ret;
+	return 0;
 }
 
 static int mvebu_a3700_comphy_sgmii_power_on(uint8_t comphy_index,
 					     uint32_t comphy_mode)
 {
-	int ret = 0;
-	uint32_t mask, data, offset;
+	int ret;
+	uint32_t mask, data;
+	uintptr_t offset;
 	uintptr_t sd_ip_addr;
 	int mode = COMPHY_GET_MODE(comphy_mode);
 	int invert = COMPHY_GET_POLARITY_INVERT(comphy_mode);
@@ -364,7 +380,10 @@
 	debug_enter();
 
 	/* Set selector */
-	mvebu_a3700_comphy_set_phy_selector(comphy_index, comphy_mode);
+	ret = mvebu_a3700_comphy_set_phy_selector(comphy_index, comphy_mode);
+	if (ret) {
+		return ret;
+	}
 
 	/* Serdes IP Base address
 	 * COMPHY Lane0 -- USB3/GBE1
@@ -481,7 +500,7 @@
 	debug("Running C-DPI phy init %s mode\n",
 	      mode == COMPHY_2500BASEX_MODE ? "2G5" : "1G");
 	if (get_ref_clk() == 40)
-		comphy_sgmii_phy_init(comphy_index, mode, sd_ip_addr);
+		comphy_sgmii_phy_init(sd_ip_addr, mode != COMPHY_2500BASEX_MODE);
 
 	/*
 	 * 14. [Simulation Only] should not be used for real chip.
@@ -525,8 +544,10 @@
 				   PHY_PLL_READY_TX_BIT | PHY_PLL_READY_RX_BIT,
 				   PHY_PLL_READY_TX_BIT | PHY_PLL_READY_RX_BIT,
 				   COMPHY_PLL_TIMEOUT, REG_32BIT);
-	if (ret)
+	if (ret) {
 		ERROR("Failed to lock PLL for SGMII PHY %d\n", comphy_index);
+		return -ETIMEDOUT;
+	}
 
 	/*
 	 * 19. Set COMPHY input port PIN_TX_IDLE=0
@@ -549,26 +570,29 @@
 				   PHY_PLL_READY_TX_BIT | PHY_PLL_READY_RX_BIT,
 				   PHY_PLL_READY_TX_BIT | PHY_PLL_READY_RX_BIT,
 				   COMPHY_PLL_TIMEOUT, REG_32BIT);
-	if (ret)
+	if (ret) {
 		ERROR("Failed to lock PLL for SGMII PHY %d\n", comphy_index);
-
+		return -ETIMEDOUT;
+	}
 
 	ret = polling_with_timeout(MVEBU_COMPHY_REG_BASE +
 				   COMPHY_PHY_STATUS_OFFSET(comphy_index),
 				   PHY_RX_INIT_DONE_BIT, PHY_RX_INIT_DONE_BIT,
 				   COMPHY_PLL_TIMEOUT, REG_32BIT);
-	if (ret)
+	if (ret) {
 		ERROR("Failed to init RX of SGMII PHY %d\n", comphy_index);
+		return -ETIMEDOUT;
+	}
 
 	debug_exit();
 
-	return ret;
+	return 0;
 }
 
 static int mvebu_a3700_comphy_sgmii_power_off(uint8_t comphy_index)
 {
-	int ret = 0;
-	uint32_t mask, data, offset;
+	uintptr_t offset;
+	uint32_t mask, data;
 
 	debug_enter();
 
@@ -579,28 +603,31 @@
 
 	debug_exit();
 
-	return ret;
+	return 0;
 }
 
 static int mvebu_a3700_comphy_usb3_power_on(uint8_t comphy_index,
 					    uint32_t comphy_mode)
 {
-	int ret = 0;
+	int ret;
 	uintptr_t reg_base = 0;
-	uint32_t mask, data, addr, cfg, ref_clk;
+	uintptr_t addr;
+	uint32_t mask, data, cfg, ref_clk;
 	void (*usb3_reg_set)(uintptr_t addr, uint32_t reg_offset, uint16_t data,
-			     uint16_t mask, int mode);
-	int mode = COMPHY_GET_MODE(comphy_mode);
+			     uint16_t mask);
 	int invert = COMPHY_GET_POLARITY_INVERT(comphy_mode);
 
 	debug_enter();
 
 	/* Set phy seclector */
-	mvebu_a3700_comphy_set_phy_selector(comphy_index, comphy_mode);
+	ret = mvebu_a3700_comphy_set_phy_selector(comphy_index, comphy_mode);
+	if (ret) {
+		return ret;
+	}
 
 	/* Set usb3 reg access func, Lane2 is indirect access */
 	if (comphy_index == COMPHY_LANE2) {
-		usb3_reg_set = &comphy_set_indirect;
+		usb3_reg_set = &comphy_usb3_set_indirect;
 		reg_base = COMPHY_INDIRECT_REG;
 	} else {
 		/* Get the direct access register resource and map */
@@ -619,7 +646,7 @@
 	mask = PRD_TXDEEMPH0_MASK | PRD_TXMARGIN_MASK | PRD_TXSWING_MASK |
 		CFG_TX_ALIGN_POS_MASK;
 	usb3_reg_set(reg_base, COMPHY_REG_LANE_CFG0_ADDR, PRD_TXDEEMPH0_MASK,
-		     mask, mode);
+		     mask);
 
 	/*
 	 * 2. Set BIT0: enable transmitter in high impedance mode
@@ -631,20 +658,20 @@
 	mask = PRD_TXDEEMPH1_MASK | TX_DET_RX_MODE | GEN2_TX_DATA_DLY_MASK |
 		TX_ELEC_IDLE_MODE_EN;
 	data = TX_DET_RX_MODE | GEN2_TX_DATA_DLY_DEFT | TX_ELEC_IDLE_MODE_EN;
-	usb3_reg_set(reg_base, COMPHY_REG_LANE_CFG1_ADDR, data, mask, mode);
+	usb3_reg_set(reg_base, COMPHY_REG_LANE_CFG1_ADDR, data, mask);
 
 	/*
 	 * 3. Set Spread Spectrum Clock Enabled
 	 */
 	usb3_reg_set(reg_base, COMPHY_REG_LANE_CFG4_ADDR,
-		     SPREAD_SPECTRUM_CLK_EN, SPREAD_SPECTRUM_CLK_EN, mode);
+		     SPREAD_SPECTRUM_CLK_EN, SPREAD_SPECTRUM_CLK_EN);
 
 	/*
 	 * 4. Set Override Margining Controls From the MAC:
 	 *    Use margining signals from lane configuration
 	 */
 	usb3_reg_set(reg_base, COMPHY_REG_TEST_MODE_CTRL_ADDR,
-		     MODE_MARGIN_OVERRIDE, REG_16_BIT_MASK, mode);
+		     MODE_MARGIN_OVERRIDE, REG_16_BIT_MASK);
 
 	/*
 	 * 5. Set Lane-to-Lane Bundle Clock Sampling Period = per PCLK cycles
@@ -652,13 +679,13 @@
 	 */
 	usb3_reg_set(reg_base, COMPHY_REG_GLOB_CLK_SRC_LO_ADDR, 0x0,
 		     (MODE_CLK_SRC | BUNDLE_PERIOD_SEL | BUNDLE_PERIOD_SCALE |
-		      BUNDLE_SAMPLE_CTRL | PLL_READY_DLY), mode);
+		      BUNDLE_SAMPLE_CTRL | PLL_READY_DLY));
 
 	/*
 	 * 6. Set G2 Spread Spectrum Clock Amplitude at 4K
 	 */
 	usb3_reg_set(reg_base, COMPHY_REG_GEN2_SET_2,
-		     G2_TX_SSC_AMP_VALUE_20, G2_TX_SSC_AMP_MASK, mode);
+		     G2_TX_SSC_AMP_VALUE_20, G2_TX_SSC_AMP_MASK);
 
 	/*
 	 * 7. Unset G3 Spread Spectrum Clock Amplitude
@@ -667,7 +694,7 @@
 	mask = G3_TX_SSC_AMP_MASK | G3_VREG_RXTX_MAS_ISET_MASK |
 		RSVD_PH03FH_6_0_MASK;
 	usb3_reg_set(reg_base, COMPHY_REG_GEN2_SET_3,
-		     G3_VREG_RXTX_MAS_ISET_60U, mask, mode);
+		     G3_VREG_RXTX_MAS_ISET_60U, mask);
 
 	/*
 	 * 8. Check crystal jumper setting and program the Power and PLL Control
@@ -688,39 +715,37 @@
 		REF_FREF_SEL_MASK;
 	data = PU_IVREF_BIT | PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT |
 		PU_TX_INTP_BIT | PU_DFE_BIT | PHY_MODE_USB3 | ref_clk;
-	usb3_reg_set(reg_base, COMPHY_POWER_PLL_CTRL, data,  mask, mode);
+	usb3_reg_set(reg_base, COMPHY_POWER_PLL_CTRL, data,  mask);
 
 	mask = CFG_PM_OSCCLK_WAIT_MASK | CFG_PM_RXDEN_WAIT_MASK |
 		CFG_PM_RXDLOZ_WAIT_MASK;
 	data = CFG_PM_RXDEN_WAIT_1_UNIT  | cfg;
-	usb3_reg_set(reg_base, COMPHY_REG_PWR_MGM_TIM1_ADDR, data, mask, mode);
+	usb3_reg_set(reg_base, COMPHY_REG_PWR_MGM_TIM1_ADDR, data, mask);
 
 	/*
 	 * 9. Enable idle sync
 	 */
 	data = UNIT_CTRL_DEFAULT_VALUE | IDLE_SYNC_EN;
-	usb3_reg_set(reg_base, COMPHY_REG_UNIT_CTRL_ADDR, data, REG_16_BIT_MASK,
-		     mode);
+	usb3_reg_set(reg_base, COMPHY_REG_UNIT_CTRL_ADDR, data, REG_16_BIT_MASK);
 
 	/*
 	 * 10. Enable the output of 500M clock
 	 */
 	data = MISC_REG0_DEFAULT_VALUE | CLK500M_EN;
-	usb3_reg_set(reg_base, COMPHY_MISC_REG0_ADDR, data, REG_16_BIT_MASK,
-		     mode);
+	usb3_reg_set(reg_base, COMPHY_MISC_REG0_ADDR, data, REG_16_BIT_MASK);
 
 	/*
 	 * 11. Set 20-bit data width
 	 */
 	usb3_reg_set(reg_base, COMPHY_LOOPBACK_REG0, DATA_WIDTH_20BIT,
-		     REG_16_BIT_MASK, mode);
+		     REG_16_BIT_MASK);
 
 	/*
 	 * 12. Override Speed_PLL value and use MAC PLL
 	 */
 	usb3_reg_set(reg_base, COMPHY_KVCO_CAL_CTRL,
 		     (SPEED_PLL_VALUE_16 | USE_MAX_PLL_RATE_BIT),
-		     REG_16_BIT_MASK, mode);
+		     REG_16_BIT_MASK);
 
 	/*
 	 * 13. Check the Polarity invert bit
@@ -733,27 +758,26 @@
 		data |= RXD_INVERT_BIT;
 	}
 	mask = TXD_INVERT_BIT | RXD_INVERT_BIT;
-	usb3_reg_set(reg_base, COMPHY_SYNC_PATTERN_REG, data, mask, mode);
+	usb3_reg_set(reg_base, COMPHY_SYNC_PATTERN_REG, data, mask);
 
 	/*
 	 * 14. Set max speed generation to USB3.0 5Gbps
 	 */
 	usb3_reg_set(reg_base, COMPHY_SYNC_MASK_GEN_REG, PHY_GEN_USB3_5G,
-		     PHY_GEN_MAX_MASK, mode);
+		     PHY_GEN_MAX_MASK);
 
 	/*
 	 * 15. Set capacitor value for FFE gain peaking to 0xF
 	 */
 	usb3_reg_set(reg_base, COMPHY_REG_GEN3_SETTINGS_3,
-		     COMPHY_GEN_FFE_CAP_SEL_VALUE, COMPHY_GEN_FFE_CAP_SEL_MASK,
-		     mode);
+		     COMPHY_GEN_FFE_CAP_SEL_VALUE, COMPHY_GEN_FFE_CAP_SEL_MASK);
 
 	/*
 	 * 16. Release SW reset
 	 */
 	data = MODE_CORE_CLK_FREQ_SEL | MODE_PIPE_WIDTH_32 | MODE_REFDIV_BY_4;
 	usb3_reg_set(reg_base, COMPHY_REG_GLOB_PHY_CTRL0_ADDR, data,
-		     REG_16_BIT_MASK, mode);
+		     REG_16_BIT_MASK);
 
 	/* Wait for > 55 us to allow PCLK be enabled */
 	udelay(PLL_SET_DELAY_US);
@@ -771,12 +795,14 @@
 					   TXDCLK_PCLK_EN, TXDCLK_PCLK_EN,
 					   COMPHY_PLL_TIMEOUT, REG_16BIT);
 	}
-	if (ret)
+	if (ret) {
 		ERROR("Failed to lock USB3 PLL\n");
+		return -ETIMEDOUT;
+	}
 
 	debug_exit();
 
-	return ret;
+	return 0;
 }
 
 static int mvebu_a3700_comphy_pcie_power_on(uint8_t comphy_index,
@@ -862,12 +888,14 @@
 	ret = polling_with_timeout(LANE_STATUS1_ADDR(PCIE) + COMPHY_SD_ADDR,
 				   TXDCLK_PCLK_EN, TXDCLK_PCLK_EN,
 				   COMPHY_PLL_TIMEOUT, REG_16BIT);
-	if (ret)
+	if (ret) {
 		ERROR("Failed to lock PCIE PLL\n");
+		return -ETIMEDOUT;
+	}
 
 	debug_exit();
 
-	return ret;
+	return 0;
 }
 
 int mvebu_3700_comphy_power_on(uint8_t comphy_index, uint32_t comphy_mode)
@@ -919,23 +947,22 @@
 	return 0;
 }
 
-static int mvebu_a3700_comphy_sata_power_off(uint32_t comphy_mode)
+static int mvebu_a3700_comphy_sata_power_off(void)
 {
 	uintptr_t comphy_indir_regs = COMPHY_INDIRECT_REG;
-	int mode = COMPHY_GET_MODE(comphy_mode);
 	uint32_t offset;
 
 	debug_enter();
 
 	/* Set phy isolation mode */
 	offset = COMPHY_ISOLATION_CTRL_REG + SATAPHY_LANE2_REG_BASE_OFFSET;
-	comphy_set_indirect(comphy_indir_regs, offset, PHY_ISOLATE_MODE,
-			    PHY_ISOLATE_MODE, mode);
+	comphy_sata_set_indirect(comphy_indir_regs, offset, PHY_ISOLATE_MODE,
+				 PHY_ISOLATE_MODE);
 
 	/* Power off PLL, Tx, Rx */
 	offset = COMPHY_POWER_PLL_CTRL + SATAPHY_LANE2_REG_BASE_OFFSET;
-	comphy_set_indirect(comphy_indir_regs, offset, 0,
-			    PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT, mode);
+	comphy_sata_set_indirect(comphy_indir_regs, offset, 0,
+				 PU_PLL_BIT | PU_RX_BIT | PU_TX_BIT);
 
 	debug_exit();
 
@@ -968,7 +995,7 @@
 		err = mvebu_a3700_comphy_usb3_power_off();
 		break;
 	case (COMPHY_SATA_MODE):
-		err = mvebu_a3700_comphy_sata_power_off(comphy_mode);
+		err = mvebu_a3700_comphy_sata_power_off();
 		break;
 
 	default:
diff --git a/drivers/marvell/comphy/phy-comphy-cp110.c b/drivers/marvell/comphy/phy-comphy-cp110.c
index d10425b..e7cde75 100644
--- a/drivers/marvell/comphy/phy-comphy-cp110.c
+++ b/drivers/marvell/comphy/phy-comphy-cp110.c
@@ -1730,11 +1730,13 @@
 				HPIPE_LANE_STATUS1_REG;
 			data = HPIPE_LANE_STATUS1_PCLK_EN_MASK;
 			mask = data;
-			ret = polling_with_timeout(addr, data, mask,
+			data = polling_with_timeout(addr, data, mask,
 						   PLL_LOCK_TIMEOUT,
 						   REG_32BIT);
-			if (ret)
+			if (data) {
 				ERROR("Failed to lock PCIE PLL\n");
+				ret = -ETIMEDOUT;
+			}
 		}
 	}
 
diff --git a/drivers/mtd/nand/spi_nand.c b/drivers/mtd/nand/spi_nand.c
index d01a119..abb524d 100644
--- a/drivers/mtd/nand/spi_nand.c
+++ b/drivers/mtd/nand/spi_nand.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2019,  STMicroelectronics - All Rights Reserved
+ * Copyright (c) 2019-2021,  STMicroelectronics - All Rights Reserved
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -286,6 +286,10 @@
 		return -EINVAL;
 	}
 
+	assert((spinand_dev.nand_dev->page_size != 0U) &&
+	       (spinand_dev.nand_dev->block_size != 0U) &&
+	       (spinand_dev.nand_dev->size != 0U));
+
 	ret = spi_nand_reset();
 	if (ret != 0) {
 		return ret;
@@ -301,12 +305,12 @@
 		return ret;
 	}
 
-	ret = spi_nand_quad_enable(id[0]);
+	ret = spi_nand_quad_enable(id[1]);
 	if (ret != 0) {
 		return ret;
 	}
 
-	VERBOSE("SPI_NAND Detected ID 0x%x 0x%x\n", id[0], id[1]);
+	VERBOSE("SPI_NAND Detected ID 0x%x\n", id[1]);
 
 	VERBOSE("Page size %i, Block size %i, size %lli\n",
 		spinand_dev.nand_dev->page_size,
diff --git a/drivers/st/clk/stm32mp1_clk.c b/drivers/st/clk/stm32mp1_clk.c
index 6ada96a..80b6408 100644
--- a/drivers/st/clk/stm32mp1_clk.c
+++ b/drivers/st/clk/stm32mp1_clk.c
@@ -56,6 +56,7 @@
 	_HSI_KER = NB_OSC,
 	_HSE_KER,
 	_HSE_KER_DIV2,
+	_HSE_RTC,
 	_CSI_KER,
 	_PLL1_P,
 	_PLL1_Q,
@@ -107,7 +108,7 @@
 	_USBPHY_SEL,
 	_USBO_SEL,
 	_MPU_SEL,
-	_PER_SEL,
+	_CKPER_SEL,
 	_RTC_SEL,
 	_PARENT_SEL_NB,
 	_UNKNOWN_SEL = 0xff,
@@ -125,6 +126,7 @@
 	[_HSI_KER] = CK_HSI,
 	[_HSE_KER] = CK_HSE,
 	[_HSE_KER_DIV2] = CK_HSE_DIV2,
+	[_HSE_RTC] = _UNKNOWN_ID,
 	[_CSI_KER] = CK_CSI,
 	[_PLL1_P] = PLL1_P,
 	[_PLL1_Q] = PLL1_Q,
@@ -490,7 +492,7 @@
 };
 
 static const uint8_t rtc_parents[] = {
-	_UNKNOWN_ID, _LSE, _LSI, _HSE
+	_UNKNOWN_ID, _LSE, _LSI, _HSE_RTC
 };
 
 static const struct stm32mp1_clk_sel stm32mp1_clk_sel[_PARENT_SEL_NB] = {
@@ -502,7 +504,7 @@
 	_CLK_PARENT_SEL(UART1, RCC_UART1CKSELR, usart1_parents),
 	_CLK_PARENT_SEL(RNG1, RCC_RNG1CKSELR, rng1_parents),
 	_CLK_PARENT_SEL(MPU, RCC_MPCKSELR, mpu_parents),
-	_CLK_PARENT_SEL(PER, RCC_CPERCKSELR, per_parents),
+	_CLK_PARENT_SEL(CKPER, RCC_CPERCKSELR, per_parents),
 	_CLK_PARENT_SEL(RTC, RCC_BDCR, rtc_parents),
 	_CLK_PARENT_SEL(UART6, RCC_UART6CKSELR, uart6_parents),
 	_CLK_PARENT_SEL(UART24, RCC_UART24CKSELR, uart234578_parents),
@@ -587,6 +589,7 @@
 	[_HSI_KER] = "HSI_KER",
 	[_HSE_KER] = "HSE_KER",
 	[_HSE_KER_DIV2] = "HSE_KER_DIV2",
+	[_HSE_RTC] = "HSE_RTC",
 	[_CSI_KER] = "CSI_KER",
 	[_PLL1_P] = "PLL1_P",
 	[_PLL1_Q] = "PLL1_Q",
@@ -969,6 +972,10 @@
 	case _HSE_KER_DIV2:
 		clock = stm32mp1_clk_get_fixed(_HSE) >> 1;
 		break;
+	case _HSE_RTC:
+		clock = stm32mp1_clk_get_fixed(_HSE);
+		clock /= (mmio_read_32(rcc_base + RCC_RTCDIVR) & RCC_DIVR_DIV_MASK) + 1U;
+		break;
 	case _LSI:
 		clock = stm32mp1_clk_get_fixed(_LSI);
 		break;
@@ -1652,7 +1659,7 @@
 	    (clksrc != (uint32_t)CLK_RTC_DISABLED)) {
 		mmio_clrsetbits_32(address,
 				   RCC_BDCR_RTCSRC_MASK,
-				   clksrc << RCC_BDCR_RTCSRC_SHIFT);
+				   (clksrc & RCC_SELR_SRC_MASK) << RCC_BDCR_RTCSRC_SHIFT);
 
 		mmio_setbits_32(address, RCC_BDCR_RTCCKEN);
 	}
@@ -2152,6 +2159,7 @@
 	case _HSE:
 	case _HSE_KER:
 	case _HSE_KER_DIV2:
+	case _HSE_RTC:
 	case _LSE:
 		break;
 
@@ -2210,6 +2218,7 @@
 		DDRC2, DDRC2LP,
 		DDRCAPB, DDRPHYCAPB, DDRPHYCAPBLP,
 		DDRPHYC, DDRPHYCLP,
+		RTCAPB,
 		TZC1, TZC2,
 		TZPC,
 		STGEN_K,
@@ -2218,10 +2227,6 @@
 	for (idx = 0U; idx < ARRAY_SIZE(secure_enable); idx++) {
 		stm32mp_clk_enable(secure_enable[idx]);
 	}
-
-	if (!stm32mp_is_single_core()) {
-		stm32mp1_clk_enable_secure(RTCAPB);
-	}
 }
 
 int stm32mp1_clk_probe(void)
diff --git a/drivers/st/uart/aarch32/stm32_console.S b/drivers/st/uart/aarch32/stm32_console.S
index 686b18b..2b8879a 100644
--- a/drivers/st/uart/aarch32/stm32_console.S
+++ b/drivers/st/uart/aarch32/stm32_console.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2018-2021, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -45,7 +45,12 @@
 	/* Check the input base address */
 	cmp	r0, #0
 	beq	core_init_fail
-#if defined(IMAGE_BL2)
+#if !defined(IMAGE_BL2)
+	/* Skip UART initialization if it is already enabled */
+	ldr	r3, [r0, #USART_CR1]
+	ands	r3, r3, #USART_CR1_UE
+	bne	1f
+#endif /* IMAGE_BL2 */
 	/* Check baud rate and uart clock for sanity */
 	cmp	r1, #0
 	beq	core_init_fail
@@ -78,7 +83,7 @@
 	ldr	r3, [r0, #USART_ISR]
 	tst	r3, #USART_ISR_TEACK
 	beq	teack_loop
-#endif /* IMAGE_BL2 */
+1:
 	mov	r0, #1
 	bx	lr
 core_init_fail:
diff --git a/include/arch/aarch64/arch.h b/include/arch/aarch64/arch.h
index 9ea1114..1b3ae02 100644
--- a/include/arch/aarch64/arch.h
+++ b/include/arch/aarch64/arch.h
@@ -281,6 +281,11 @@
 #define ID_AA64MMFR1_EL1_VHE_SHIFT		U(8)
 #define ID_AA64MMFR1_EL1_VHE_MASK		ULL(0xf)
 
+#define ID_AA64MMFR1_EL1_HCX_SHIFT              U(40)
+#define ID_AA64MMFR1_EL1_HCX_MASK               ULL(0xf)
+#define ID_AA64MMFR1_EL1_HCX_SUPPORTED          ULL(0x1)
+#define ID_AA64MMFR1_EL1_HCX_NOT_SUPPORTED      ULL(0x0)
+
 /* ID_AA64MMFR2_EL1 definitions */
 #define ID_AA64MMFR2_EL1		S3_0_C0_C7_2
 
@@ -429,6 +434,7 @@
 #define SCR_RES1_BITS		((U(1) << 4) | (U(1) << 5))
 #define SCR_TWEDEL_SHIFT	U(30)
 #define SCR_TWEDEL_MASK		ULL(0xf)
+#define SCR_HXEn_BIT            (UL(1) << 38)
 #define SCR_AMVOFFEN_BIT	(UL(1) << 35)
 #define SCR_TWEDEn_BIT		(UL(1) << 29)
 #define SCR_ECVEN_BIT		(UL(1) << 28)
@@ -516,13 +522,18 @@
 #define VTTBR_BADDR_SHIFT	U(0)
 
 /* HCR definitions */
+#define HCR_RESET_VAL		ULL(0x0)
 #define HCR_AMVOFFEN_BIT	(ULL(1) << 51)
+#define HCR_TEA_BIT		(ULL(1) << 47)
 #define HCR_API_BIT		(ULL(1) << 41)
 #define HCR_APK_BIT		(ULL(1) << 40)
 #define HCR_E2H_BIT		(ULL(1) << 34)
+#define HCR_HCD_BIT		(ULL(1) << 29)
 #define HCR_TGE_BIT		(ULL(1) << 27)
 #define HCR_RW_SHIFT		U(31)
 #define HCR_RW_BIT		(ULL(1) << HCR_RW_SHIFT)
+#define HCR_TWE_BIT		(ULL(1) << 14)
+#define HCR_TWI_BIT		(ULL(1) << 13)
 #define HCR_AMO_BIT		(ULL(1) << 5)
 #define HCR_IMO_BIT		(ULL(1) << 4)
 #define HCR_FMO_BIT		(ULL(1) << 3)
@@ -1144,6 +1155,16 @@
 #define GCR_EL1			S3_0_C1_C0_6
 
 /*******************************************************************************
+ * FEAT_HCX - Extended Hypervisor Configuration Register
+ ******************************************************************************/
+#define HCRX_EL2                S3_4_C1_C2_2
+#define HCRX_EL2_FGTnXS_BIT     (UL(1) << 4)
+#define HCRX_EL2_FnXS_BIT       (UL(1) << 3)
+#define HCRX_EL2_EnASR_BIT      (UL(1) << 2)
+#define HCRX_EL2_EnALS_BIT      (UL(1) << 1)
+#define HCRX_EL2_EnAS0_BIT      (UL(1) << 0)
+
+/*******************************************************************************
  * Definitions for DynamicIQ Shared Unit registers
  ******************************************************************************/
 #define CLUSTERPWRDN_EL1	S3_0_c15_c3_6
diff --git a/include/arch/aarch64/arch_features.h b/include/arch/aarch64/arch_features.h
index dc0b7f3..3ff67e5 100644
--- a/include/arch/aarch64/arch_features.h
+++ b/include/arch/aarch64/arch_features.h
@@ -117,4 +117,10 @@
 		ID_AA64PFR1_MPAM_FRAC_SHIFT) & ID_AA64PFR1_MPAM_FRAC_MASK));
 }
 
+static inline bool is_feat_hcx_present(void)
+{
+	return (((read_id_aa64mmfr1_el1() >> ID_AA64MMFR1_EL1_HCX_SHIFT) &
+		ID_AA64MMFR1_EL1_HCX_MASK) == ID_AA64MMFR1_EL1_HCX_SUPPORTED);
+}
+
 #endif /* ARCH_FEATURES_H */
diff --git a/include/arch/aarch64/arch_helpers.h b/include/arch/aarch64/arch_helpers.h
index a41b325..72b87c8 100644
--- a/include/arch/aarch64/arch_helpers.h
+++ b/include/arch/aarch64/arch_helpers.h
@@ -233,8 +233,10 @@
 
 void disable_mmu_el1(void);
 void disable_mmu_el3(void);
+void disable_mpu_el2(void);
 void disable_mmu_icache_el1(void);
 void disable_mmu_icache_el3(void);
+void disable_mpu_icache_el2(void);
 
 /*******************************************************************************
  * Misc. accessor prototypes
@@ -532,6 +534,9 @@
 DEFINE_SYSREG_READ_FUNC(rndr)
 DEFINE_SYSREG_READ_FUNC(rndrrs)
 
+/* FEAT_HCX Register */
+DEFINE_RENAME_SYSREG_RW_FUNCS(hcrx_el2, HCRX_EL2)
+
 /* DynamIQ Shared Unit power management */
 DEFINE_RENAME_SYSREG_RW_FUNCS(clusterpwrdn_el1, CLUSTERPWRDN_EL1)
 
diff --git a/include/arch/aarch64/el2_common_macros.S b/include/arch/aarch64/el2_common_macros.S
new file mode 100644
index 0000000..c57a1ec
--- /dev/null
+++ b/include/arch/aarch64/el2_common_macros.S
@@ -0,0 +1,448 @@
+/*
+ * Copyright (c) 2015-2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef EL2_COMMON_MACROS_S
+#define EL2_COMMON_MACROS_S
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <context.h>
+#include <lib/xlat_tables/xlat_tables_defs.h>
+
+#include <platform_def.h>
+
+	/*
+	 * Helper macro to initialise system registers at EL2.
+	 */
+	.macro el2_arch_init_common
+
+	/* ---------------------------------------------------------------------
+	 * SCTLR_EL2 has already been initialised - read current value before
+	 * modifying.
+	 *
+	 * SCTLR_EL2.I: Enable the instruction cache.
+	 *
+	 * SCTLR_EL2.SA: Enable Stack Alignment check. A SP alignment fault
+	 *  exception is generated if a load or store instruction executed at
+	 *  EL2 uses the SP as the base address and the SP is not aligned to a
+	 *  16-byte boundary.
+	 *
+	 * SCTLR_EL2.A: Enable Alignment fault checking. All instructions that
+	 *  load or store one or more registers have an alignment check that the
+	 *  address being accessed is aligned to the size of the data element(s)
+	 *  being accessed.
+	 * ---------------------------------------------------------------------
+	 */
+	mov	x1, #(SCTLR_I_BIT | SCTLR_A_BIT | SCTLR_SA_BIT)
+	mrs	x0, sctlr_el2
+	orr	x0, x0, x1
+	msr	sctlr_el2, x0
+	isb
+
+	/* ---------------------------------------------------------------------
+	 * Initialise HCR_EL2, setting all fields rather than relying on HW.
+	 * All fields are architecturally UNKNOWN on reset. The following fields
+	 * do not change during the TF lifetime. The remaining fields are set to
+	 * zero here but are updated ahead of transitioning to a lower EL in the
+	 * function cm_init_context_common().
+	 *
+	 * HCR_EL2.TWE: Set to zero so that execution of WFE instructions at
+	 *  EL2, EL1 and EL0 are not trapped to EL2.
+	 *
+	 * HCR_EL2.TWI: Set to zero so that execution of WFI instructions at
+	 *  EL2, EL1 and EL0 are not trapped to EL2.
+	 *
+	 * HCR_EL2.HCD: Set to zero to enable HVC calls at EL1 and above,
+	 *  from both Security states and both Execution states.
+	 *
+	 * HCR_EL2.TEA: Set to one to route External Aborts and SError
+	 * Interrupts to EL2 when executing at any EL.
+	 *
+	 * HCR_EL2.{API,APK}: For Armv8.3 pointer authentication feature,
+	 * disable traps to EL2 when accessing key registers or using
+	 * pointer authentication instructions from lower ELs.
+	 * ---------------------------------------------------------------------
+	 */
+	mov_imm	x0, ((HCR_RESET_VAL | HCR_TEA_BIT) \
+			& ~(HCR_TWE_BIT | HCR_TWI_BIT | HCR_HCD_BIT))
+#if CTX_INCLUDE_PAUTH_REGS
+	/*
+	 * If the pointer authentication registers are saved during world
+	 * switches, enable pointer authentication everywhere, as it is safe to
+	 * do so.
+	 */
+	orr	x0, x0, #(HCR_API_BIT | HCR_APK_BIT)
+#endif  /* CTX_INCLUDE_PAUTH_REGS */
+	msr	hcr_el2, x0
+
+	/* ---------------------------------------------------------------------
+	 * Initialise MDCR_EL2, setting all fields rather than relying on
+	 * hw. Some fields are architecturally UNKNOWN on reset.
+	 *
+	 * MDCR_EL2.SDD: Set to one to disable AArch64 Secure self-hosted
+	 *  debug. Debug exceptions, other than Breakpoint Instruction
+	 *  exceptions, are disabled from all ELs in Secure state.
+	 *
+	 * MDCR_EL2.TDOSA: Set to zero so that EL2 and EL2 System register
+	 *  access to the powerdown debug registers do not trap to EL2.
+	 *
+	 * MDCR_EL2.TDA: Set to zero to allow EL0, EL1 and EL2 access to the
+	 *  debug registers, other than those registers that are controlled by
+	 *  MDCR_EL2.TDOSA.
+	 *
+	 * MDCR_EL2.TPM: Set to zero so that EL0, EL1, and EL2 System
+	 *  register accesses to all Performance Monitors registers do not trap
+	 *  to EL2.
+	 *
+	 * MDCR_EL2.SCCD: Set to one so that cycle counting by PMCCNTR_EL0
+	 *  is prohibited in Secure state. This bit is RES0 in versions of the
+	 *  architecture with FEAT_PMUv3p5 not implemented, setting it to 1
+	 *  doesn't have any effect on them.
+	 *
+	 * MDCR_EL2.MCCD: Set to one so that cycle counting by PMCCNTR_EL0
+	 *  is prohibited in EL2. This bit is RES0 in versions of the
+	 *  architecture with FEAT_PMUv3p7 not implemented, setting it to 1
+	 *  doesn't have any effect on them.
+	 *
+	 * MDCR_EL2.SPME: Set to zero so that event counting by the program-
+	 *  mable counters PMEVCNTR<n>_EL0 is prohibited in Secure state. If
+	 *  ARMv8.2 Debug is not implemented this bit does not have any effect
+	 *  on the counters unless there is support for the implementation
+	 *  defined authentication interface
+	 *  ExternalSecureNoninvasiveDebugEnabled().
+	 * ---------------------------------------------------------------------
+	 */
+	mov_imm	x0, ((MDCR_EL2_RESET_VAL | MDCR_SDD_BIT | \
+		      MDCR_SPD32(MDCR_SPD32_DISABLE) | MDCR_SCCD_BIT | \
+		      MDCR_MCCD_BIT) & ~(MDCR_SPME_BIT | MDCR_TDOSA_BIT | \
+		      MDCR_TDA_BIT | MDCR_TPM_BIT))
+
+	msr	mdcr_el2, x0
+
+	/* ---------------------------------------------------------------------
+	 * Initialise PMCR_EL0 setting all fields rather than relying
+	 * on hw. Some fields are architecturally UNKNOWN on reset.
+	 *
+	 * PMCR_EL0.LP: Set to one so that event counter overflow, that
+	 *  is recorded in PMOVSCLR_EL0[0-30], occurs on the increment
+	 *  that changes PMEVCNTR<n>_EL0[63] from 1 to 0, when ARMv8.5-PMU
+	 *  is implemented. This bit is RES0 in versions of the architecture
+	 *  earlier than ARMv8.5, setting it to 1 doesn't have any effect
+	 *  on them.
+	 *
+	 * PMCR_EL0.LC: Set to one so that cycle counter overflow, that
+	 *  is recorded in PMOVSCLR_EL0[31], occurs on the increment
+	 *  that changes PMCCNTR_EL0[63] from 1 to 0.
+	 *
+	 * PMCR_EL0.DP: Set to one so that the cycle counter,
+	 *  PMCCNTR_EL0 does not count when event counting is prohibited.
+	 *
+	 * PMCR_EL0.X: Set to zero to disable export of events.
+	 *
+	 * PMCR_EL0.D: Set to zero so that, when enabled, PMCCNTR_EL0
+	 *  counts on every clock cycle.
+	 * ---------------------------------------------------------------------
+	 */
+	mov_imm	x0, ((PMCR_EL0_RESET_VAL | PMCR_EL0_LP_BIT | \
+		      PMCR_EL0_LC_BIT | PMCR_EL0_DP_BIT) & \
+		    ~(PMCR_EL0_X_BIT | PMCR_EL0_D_BIT))
+
+	msr	pmcr_el0, x0
+
+	/* ---------------------------------------------------------------------
+	 * Enable External Aborts and SError Interrupts now that the exception
+	 * vectors have been setup.
+	 * ---------------------------------------------------------------------
+	 */
+	msr	daifclr, #DAIF_ABT_BIT
+
+	/* ---------------------------------------------------------------------
+	 * Initialise CPTR_EL2, setting all fields rather than relying on hw.
+	 * All fields are architecturally UNKNOWN on reset.
+	 *
+	 * CPTR_EL2.TCPAC: Set to zero so that any accesses to CPACR_EL1 do
+	 * not trap to EL2.
+	 *
+	 * CPTR_EL2.TTA: Set to zero so that System register accesses to the
+	 *  trace registers do not trap to EL2.
+	 *
+	 * CPTR_EL2.TFP: Set to zero so that accesses to the V- or Z- registers
+	 *  by Advanced SIMD, floating-point or SVE instructions (if implemented)
+	 *  do not trap to EL2.
+	 */
+
+	mov_imm x0, (CPTR_EL2_RESET_VAL & ~(TCPAC_BIT | TTA_BIT | TFP_BIT))
+	msr	cptr_el2, x0
+
+	/*
+	 * If Data Independent Timing (DIT) functionality is implemented,
+	 * always enable DIT in EL2
+	 */
+	mrs	x0, id_aa64pfr0_el1
+	ubfx	x0, x0, #ID_AA64PFR0_DIT_SHIFT, #ID_AA64PFR0_DIT_LENGTH
+	cmp	x0, #ID_AA64PFR0_DIT_SUPPORTED
+	bne	1f
+	mov	x0, #DIT_BIT
+	msr	DIT, x0
+1:
+	.endm
+
+/* -----------------------------------------------------------------------------
+ * This is the super set of actions that need to be performed during a cold boot
+ * or a warm boot in EL2. This code is shared by BL1 and BL31.
+ *
+ * This macro will always perform reset handling, architectural initialisations
+ * and stack setup. The rest of the actions are optional because they might not
+ * be needed, depending on the context in which this macro is called. This is
+ * why this macro is parameterised ; each parameter allows to enable/disable
+ * some actions.
+ *
+ *  _init_sctlr:
+ *	Whether the macro needs to initialise SCTLR_EL2, including configuring
+ *      the endianness of data accesses.
+ *
+ *  _warm_boot_mailbox:
+ *	Whether the macro needs to detect the type of boot (cold/warm). The
+ *	detection is based on the platform entrypoint address : if it is zero
+ *	then it is a cold boot, otherwise it is a warm boot. In the latter case,
+ *	this macro jumps on the platform entrypoint address.
+ *
+ *  _secondary_cold_boot:
+ *	Whether the macro needs to identify the CPU that is calling it: primary
+ *	CPU or secondary CPU. The primary CPU will be allowed to carry on with
+ *	the platform initialisations, while the secondaries will be put in a
+ *	platform-specific state in the meantime.
+ *
+ *	If the caller knows this macro will only be called by the primary CPU
+ *	then this parameter can be defined to 0 to skip this step.
+ *
+ * _init_memory:
+ *	Whether the macro needs to initialise the memory.
+ *
+ * _init_c_runtime:
+ *	Whether the macro needs to initialise the C runtime environment.
+ *
+ * _exception_vectors:
+ *	Address of the exception vectors to program in the VBAR_EL2 register.
+ *
+ * _pie_fixup_size:
+ *	Size of memory region to fixup Global Descriptor Table (GDT).
+ *
+ *	A non-zero value is expected when firmware needs GDT to be fixed-up.
+ *
+ * -----------------------------------------------------------------------------
+ */
+	.macro el2_entrypoint_common					\
+		_init_sctlr, _warm_boot_mailbox, _secondary_cold_boot,	\
+		_init_memory, _init_c_runtime, _exception_vectors,	\
+		_pie_fixup_size
+
+	.if \_init_sctlr
+		/* -------------------------------------------------------------
+		 * This is the initialisation of SCTLR_EL2 and so must ensure
+		 * that all fields are explicitly set rather than relying on hw.
+		 * Some fields reset to an IMPLEMENTATION DEFINED value and
+		 * others are architecturally UNKNOWN on reset.
+		 *
+		 * SCTLR.EE: Set the CPU endianness before doing anything that
+		 *  might involve memory reads or writes. Set to zero to select
+		 *  Little Endian.
+		 *
+		 * SCTLR_EL2.WXN: For the EL2 translation regime, this field can
+		 *  force all memory regions that are writeable to be treated as
+		 *  XN (Execute-never). Set to zero so that this control has no
+		 *  effect on memory access permissions.
+		 *
+		 * SCTLR_EL2.SA: Set to zero to disable Stack Alignment check.
+		 *
+		 * SCTLR_EL2.A: Set to zero to disable Alignment fault checking.
+		 *
+		 * SCTLR.DSSBS: Set to zero to disable speculation store bypass
+		 *  safe behaviour upon exception entry to EL2.
+		 * -------------------------------------------------------------
+		 */
+		mov_imm	x0, (SCTLR_RESET_VAL & ~(SCTLR_EE_BIT | SCTLR_WXN_BIT \
+				| SCTLR_SA_BIT | SCTLR_A_BIT | SCTLR_DSSBS_BIT))
+		msr	sctlr_el2, x0
+		isb
+	.endif /* _init_sctlr */
+
+#if DISABLE_MTPMU
+		bl	mtpmu_disable
+#endif
+
+	.if \_warm_boot_mailbox
+		/* -------------------------------------------------------------
+		 * This code will be executed for both warm and cold resets.
+		 * Now is the time to distinguish between the two.
+		 * Query the platform entrypoint address and if it is not zero
+		 * then it means it is a warm boot so jump to this address.
+		 * -------------------------------------------------------------
+		 */
+		bl	plat_get_my_entrypoint
+		cbz	x0, do_cold_boot
+		br	x0
+
+	do_cold_boot:
+	.endif /* _warm_boot_mailbox */
+
+	.if \_pie_fixup_size
+#if ENABLE_PIE
+		/*
+		 * ------------------------------------------------------------
+		 * If PIE is enabled fixup the Global descriptor Table only
+		 * once during primary core cold boot path.
+		 *
+		 * Compile time base address, required for fixup, is calculated
+		 * using "pie_fixup" label present within first page.
+		 * ------------------------------------------------------------
+		 */
+	pie_fixup:
+		ldr	x0, =pie_fixup
+		and	x0, x0, #~(PAGE_SIZE_MASK)
+		mov_imm	x1, \_pie_fixup_size
+		add	x1, x1, x0
+		bl	fixup_gdt_reloc
+#endif /* ENABLE_PIE */
+	.endif /* _pie_fixup_size */
+
+	/* ---------------------------------------------------------------------
+	 * Set the exception vectors.
+	 * ---------------------------------------------------------------------
+	 */
+	adr	x0, \_exception_vectors
+	msr	vbar_el2, x0
+	isb
+
+	/* ---------------------------------------------------------------------
+	 * It is a cold boot.
+	 * Perform any processor specific actions upon reset e.g. cache, TLB
+	 * invalidations etc.
+	 * ---------------------------------------------------------------------
+	 */
+	bl	reset_handler
+
+	el2_arch_init_common
+
+	.if \_secondary_cold_boot
+		/* -------------------------------------------------------------
+		 * Check if this is a primary or secondary CPU cold boot.
+		 * The primary CPU will set up the platform while the
+		 * secondaries are placed in a platform-specific state until the
+		 * primary CPU performs the necessary actions to bring them out
+		 * of that state and allows entry into the OS.
+		 * -------------------------------------------------------------
+		 */
+		bl	plat_is_my_cpu_primary
+		cbnz	w0, do_primary_cold_boot
+
+		/* This is a cold boot on a secondary CPU */
+		bl	plat_secondary_cold_boot_setup
+		/* plat_secondary_cold_boot_setup() is not supposed to return */
+		bl	el2_panic
+	do_primary_cold_boot:
+	.endif /* _secondary_cold_boot */
+
+	/* ---------------------------------------------------------------------
+	 * Initialize memory now. Secondary CPU initialization won't get to this
+	 * point.
+	 * ---------------------------------------------------------------------
+	 */
+
+	.if \_init_memory
+		bl	platform_mem_init
+	.endif /* _init_memory */
+
+	/* ---------------------------------------------------------------------
+	 * Init C runtime environment:
+	 *   - Zero-initialise the NOBITS sections. There are 2 of them:
+	 *       - the .bss section;
+	 *       - the coherent memory section (if any).
+	 *   - Relocate the data section from ROM to RAM, if required.
+	 * ---------------------------------------------------------------------
+	 */
+	.if \_init_c_runtime
+		adrp	x0, __BSS_START__
+		add	x0, x0, :lo12:__BSS_START__
+
+		adrp	x1, __BSS_END__
+		add	x1, x1, :lo12:__BSS_END__
+		sub	x1, x1, x0
+		bl	zeromem
+
+#if defined(IMAGE_BL1) || (defined(IMAGE_BL2) && BL2_AT_EL3 && BL2_IN_XIP_MEM)
+		adrp	x0, __DATA_RAM_START__
+		add	x0, x0, :lo12:__DATA_RAM_START__
+		adrp	x1, __DATA_ROM_START__
+		add	x1, x1, :lo12:__DATA_ROM_START__
+		adrp	x2, __DATA_RAM_END__
+		add	x2, x2, :lo12:__DATA_RAM_END__
+		sub	x2, x2, x0
+		bl	memcpy16
+#endif
+	.endif /* _init_c_runtime */
+
+	/* ---------------------------------------------------------------------
+	 * Use SP_EL0 for the C runtime stack.
+	 * ---------------------------------------------------------------------
+	 */
+	msr	spsel, #0
+
+	/* ---------------------------------------------------------------------
+	 * Allocate a stack whose memory will be marked as Normal-IS-WBWA when
+	 * the MMU is enabled. There is no risk of reading stale stack memory
+	 * after enabling the MMU as only the primary CPU is running at the
+	 * moment.
+	 * ---------------------------------------------------------------------
+	 */
+	bl	plat_set_my_stack
+
+#if STACK_PROTECTOR_ENABLED
+	.if \_init_c_runtime
+	bl	update_stack_protector_canary
+	.endif /* _init_c_runtime */
+#endif
+	.endm
+
+	.macro	apply_at_speculative_wa
+#if ERRATA_SPECULATIVE_AT
+	/*
+	 * Explicitly save x30 so as to free up a register and to enable
+	 * branching and also, save x29 which will be used in the called
+	 * function
+	 */
+	stp	x29, x30, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X29]
+	bl	save_and_update_ptw_el1_sys_regs
+	ldp	x29, x30, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X29]
+#endif
+	.endm
+
+	.macro	restore_ptw_el1_sys_regs
+#if ERRATA_SPECULATIVE_AT
+	/* -----------------------------------------------------------
+	 * In case of ERRATA_SPECULATIVE_AT, must follow below order
+	 * to ensure that page table walk is not enabled until
+	 * restoration of all EL1 system registers. TCR_EL1 register
+	 * should be updated at the end which restores previous page
+	 * table walk setting of stage1 i.e.(TCR_EL1.EPDx) bits. ISB
+	 * ensures that CPU does below steps in order.
+	 *
+	 * 1. Ensure all other system registers are written before
+	 *    updating SCTLR_EL1 using ISB.
+	 * 2. Restore SCTLR_EL1 register.
+	 * 3. Ensure SCTLR_EL1 written successfully using ISB.
+	 * 4. Restore TCR_EL1 register.
+	 * -----------------------------------------------------------
+	 */
+	isb
+	ldp	x28, x29, [sp, #CTX_EL1_SYSREGS_OFFSET + CTX_SCTLR_EL1]
+	msr	sctlr_el1, x28
+	isb
+	msr	tcr_el1, x29
+#endif
+	.endm
+
+#endif /* EL2_COMMON_MACROS_S */
diff --git a/include/drivers/nxp/dcfg/dcfg_lsch3.h b/include/drivers/nxp/dcfg/dcfg_lsch3.h
index 40f02c1..cde86fe 100644
--- a/include/drivers/nxp/dcfg/dcfg_lsch3.h
+++ b/include/drivers/nxp/dcfg/dcfg_lsch3.h
@@ -74,4 +74,7 @@
 #define DCFG_BOOTLOCPTRH_OFFSET			0x404
 #define DCFG_COREDISABLEDSR_OFFSET		0x990
 
+/* Reset module bit field */
+#define RSTCR_RESET_REQ         0x2
+
 #endif /*	DCFG_LSCH3_H	*/
diff --git a/include/drivers/nxp/flexspi/flash_info.h b/include/drivers/nxp/flexspi/flash_info.h
index 6df79c9..94c9f02 100644
--- a/include/drivers/nxp/flexspi/flash_info.h
+++ b/include/drivers/nxp/flexspi/flash_info.h
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: BSD-3-Clause
 /*
- *  Copyright 2020 NXP
+ *  Copyright 2020-2021 NXP
  */
 
 /**
@@ -53,6 +53,16 @@
 #define F_SECTOR_ERASE_SZ		F_SECTOR_4K
 #endif
 
+#elif defined(CONFIG_MT35XU02G)
+#define F_SECTOR_128K			0x20000U
+#define F_PAGE_256			0x100U
+#define F_SECTOR_4K			0x1000U
+#define F_FLASH_SIZE_BYTES		0x10000000U
+#define F_SECTOR_ERASE_SZ		F_SECTOR_128K
+#ifdef CONFIG_FSPI_4K_ERASE
+#define F_SECTOR_ERASE_SZ		F_SECTOR_4K
+#endif
+
 #ifdef NXP_WARM_BOOT
 #define FLASH_WR_COMP_WAIT_BY_NOP_COUNT	0x20000
 #endif
diff --git a/include/drivers/st/stm32mp1_rcc.h b/include/drivers/st/stm32mp1_rcc.h
index 2ffc3b2..14f93fd 100644
--- a/include/drivers/st/stm32mp1_rcc.h
+++ b/include/drivers/st/stm32mp1_rcc.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2019, STMicroelectronics - All Rights Reserved
+ * Copyright (c) 2015-2021, STMicroelectronics - All Rights Reserved
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -9,488 +9,397 @@
 
 #include <lib/utils_def.h>
 
-#define RCC_TZCR			U(0x00)
-#define RCC_OCENSETR			U(0x0C)
-#define RCC_OCENCLRR			U(0x10)
-#define RCC_HSICFGR			U(0x18)
-#define RCC_CSICFGR			U(0x1C)
-#define RCC_MPCKSELR			U(0x20)
-#define RCC_ASSCKSELR			U(0x24)
-#define RCC_RCK12SELR			U(0x28)
-#define RCC_MPCKDIVR			U(0x2C)
-#define RCC_AXIDIVR			U(0x30)
-#define RCC_APB4DIVR			U(0x3C)
-#define RCC_APB5DIVR			U(0x40)
-#define RCC_RTCDIVR			U(0x44)
-#define RCC_MSSCKSELR			U(0x48)
-#define RCC_PLL1CR			U(0x80)
-#define RCC_PLL1CFGR1			U(0x84)
-#define RCC_PLL1CFGR2			U(0x88)
-#define RCC_PLL1FRACR			U(0x8C)
-#define RCC_PLL1CSGR			U(0x90)
-#define RCC_PLL2CR			U(0x94)
-#define RCC_PLL2CFGR1			U(0x98)
-#define RCC_PLL2CFGR2			U(0x9C)
-#define RCC_PLL2FRACR			U(0xA0)
-#define RCC_PLL2CSGR			U(0xA4)
-#define RCC_I2C46CKSELR			U(0xC0)
-#define RCC_SPI6CKSELR			U(0xC4)
-#define RCC_UART1CKSELR			U(0xC8)
-#define RCC_RNG1CKSELR			U(0xCC)
-#define RCC_CPERCKSELR			U(0xD0)
-#define RCC_STGENCKSELR			U(0xD4)
-#define RCC_DDRITFCR			U(0xD8)
-#define RCC_MP_BOOTCR			U(0x100)
-#define RCC_MP_SREQSETR			U(0x104)
-#define RCC_MP_SREQCLRR			U(0x108)
-#define RCC_MP_GCR			U(0x10C)
-#define RCC_MP_APRSTCR			U(0x110)
-#define RCC_MP_APRSTSR			U(0x114)
-#define RCC_BDCR			U(0x140)
-#define RCC_RDLSICR			U(0x144)
-#define RCC_APB4RSTSETR			U(0x180)
-#define RCC_APB4RSTCLRR			U(0x184)
-#define RCC_APB5RSTSETR			U(0x188)
-#define RCC_APB5RSTCLRR			U(0x18C)
-#define RCC_AHB5RSTSETR			U(0x190)
-#define RCC_AHB5RSTCLRR			U(0x194)
-#define RCC_AHB6RSTSETR			U(0x198)
-#define RCC_AHB6RSTCLRR			U(0x19C)
-#define RCC_TZAHB6RSTSETR		U(0x1A0)
-#define RCC_TZAHB6RSTCLRR		U(0x1A4)
-#define RCC_MP_APB4ENSETR		U(0x200)
-#define RCC_MP_APB4ENCLRR		U(0x204)
-#define RCC_MP_APB5ENSETR		U(0x208)
-#define RCC_MP_APB5ENCLRR		U(0x20C)
-#define RCC_MP_AHB5ENSETR		U(0x210)
-#define RCC_MP_AHB5ENCLRR		U(0x214)
-#define RCC_MP_AHB6ENSETR		U(0x218)
-#define RCC_MP_AHB6ENCLRR		U(0x21C)
-#define RCC_MP_TZAHB6ENSETR		U(0x220)
-#define RCC_MP_TZAHB6ENCLRR		U(0x224)
-#define RCC_MC_APB4ENSETR		U(0x280)
-#define RCC_MC_APB4ENCLRR		U(0x284)
-#define RCC_MC_APB5ENSETR		U(0x288)
-#define RCC_MC_APB5ENCLRR		U(0x28C)
-#define RCC_MC_AHB5ENSETR		U(0x290)
-#define RCC_MC_AHB5ENCLRR		U(0x294)
-#define RCC_MC_AHB6ENSETR		U(0x298)
-#define RCC_MC_AHB6ENCLRR		U(0x29C)
-#define RCC_MP_APB4LPENSETR		U(0x300)
-#define RCC_MP_APB4LPENCLRR		U(0x304)
-#define RCC_MP_APB5LPENSETR		U(0x308)
-#define RCC_MP_APB5LPENCLRR		U(0x30C)
-#define RCC_MP_AHB5LPENSETR		U(0x310)
-#define RCC_MP_AHB5LPENCLRR		U(0x314)
-#define RCC_MP_AHB6LPENSETR		U(0x318)
-#define RCC_MP_AHB6LPENCLRR		U(0x31C)
-#define RCC_MP_TZAHB6LPENSETR		U(0x320)
-#define RCC_MP_TZAHB6LPENCLRR		U(0x324)
-#define RCC_MC_APB4LPENSETR		U(0x380)
-#define RCC_MC_APB4LPENCLRR		U(0x384)
-#define RCC_MC_APB5LPENSETR		U(0x388)
-#define RCC_MC_APB5LPENCLRR		U(0x38C)
-#define RCC_MC_AHB5LPENSETR		U(0x390)
-#define RCC_MC_AHB5LPENCLRR		U(0x394)
-#define RCC_MC_AHB6LPENSETR		U(0x398)
-#define RCC_MC_AHB6LPENCLRR		U(0x39C)
-#define RCC_BR_RSTSCLRR			U(0x400)
-#define RCC_MP_GRSTCSETR		U(0x404)
-#define RCC_MP_RSTSCLRR			U(0x408)
-#define RCC_MP_IWDGFZSETR		U(0x40C)
-#define RCC_MP_IWDGFZCLRR		U(0x410)
-#define RCC_MP_CIER			U(0x414)
-#define RCC_MP_CIFR			U(0x418)
-#define RCC_PWRLPDLYCR			U(0x41C)
-#define RCC_MP_RSTSSETR			U(0x420)
-#define RCC_MCO1CFGR			U(0x800)
-#define RCC_MCO2CFGR			U(0x804)
-#define RCC_OCRDYR			U(0x808)
-#define RCC_DBGCFGR			U(0x80C)
-#define RCC_RCK3SELR			U(0x820)
-#define RCC_RCK4SELR			U(0x824)
-#define RCC_TIMG1PRER			U(0x828)
-#define RCC_TIMG2PRER			U(0x82C)
-#define RCC_MCUDIVR			U(0x830)
-#define RCC_APB1DIVR			U(0x834)
-#define RCC_APB2DIVR			U(0x838)
-#define RCC_APB3DIVR			U(0x83C)
-#define RCC_PLL3CR			U(0x880)
-#define RCC_PLL3CFGR1			U(0x884)
-#define RCC_PLL3CFGR2			U(0x888)
-#define RCC_PLL3FRACR			U(0x88C)
-#define RCC_PLL3CSGR			U(0x890)
-#define RCC_PLL4CR			U(0x894)
-#define RCC_PLL4CFGR1			U(0x898)
-#define RCC_PLL4CFGR2			U(0x89C)
-#define RCC_PLL4FRACR			U(0x8A0)
-#define RCC_PLL4CSGR			U(0x8A4)
-#define RCC_I2C12CKSELR			U(0x8C0)
-#define RCC_I2C35CKSELR			U(0x8C4)
-#define RCC_SAI1CKSELR			U(0x8C8)
-#define RCC_SAI2CKSELR			U(0x8CC)
-#define RCC_SAI3CKSELR			U(0x8D0)
-#define RCC_SAI4CKSELR			U(0x8D4)
-#define RCC_SPI2S1CKSELR		U(0x8D8)
-#define RCC_SPI2S23CKSELR		U(0x8DC)
-#define RCC_SPI45CKSELR			U(0x8E0)
-#define RCC_UART6CKSELR			U(0x8E4)
-#define RCC_UART24CKSELR		U(0x8E8)
-#define RCC_UART35CKSELR		U(0x8EC)
-#define RCC_UART78CKSELR		U(0x8F0)
-#define RCC_SDMMC12CKSELR		U(0x8F4)
-#define RCC_SDMMC3CKSELR		U(0x8F8)
-#define RCC_ETHCKSELR			U(0x8FC)
-#define RCC_QSPICKSELR			U(0x900)
-#define RCC_FMCCKSELR			U(0x904)
-#define RCC_FDCANCKSELR			U(0x90C)
-#define RCC_SPDIFCKSELR			U(0x914)
-#define RCC_CECCKSELR			U(0x918)
-#define RCC_USBCKSELR			U(0x91C)
-#define RCC_RNG2CKSELR			U(0x920)
-#define RCC_DSICKSELR			U(0x924)
-#define RCC_ADCCKSELR			U(0x928)
-#define RCC_LPTIM45CKSELR		U(0x92C)
-#define RCC_LPTIM23CKSELR		U(0x930)
-#define RCC_LPTIM1CKSELR		U(0x934)
-#define RCC_APB1RSTSETR			U(0x980)
-#define RCC_APB1RSTCLRR			U(0x984)
-#define RCC_APB2RSTSETR			U(0x988)
-#define RCC_APB2RSTCLRR			U(0x98C)
-#define RCC_APB3RSTSETR			U(0x990)
-#define RCC_APB3RSTCLRR			U(0x994)
-#define RCC_AHB2RSTSETR			U(0x998)
-#define RCC_AHB2RSTCLRR			U(0x99C)
-#define RCC_AHB3RSTSETR			U(0x9A0)
-#define RCC_AHB3RSTCLRR			U(0x9A4)
-#define RCC_AHB4RSTSETR			U(0x9A8)
-#define RCC_AHB4RSTCLRR			U(0x9AC)
-#define RCC_MP_APB1ENSETR		U(0xA00)
-#define RCC_MP_APB1ENCLRR		U(0xA04)
-#define RCC_MP_APB2ENSETR		U(0xA08)
-#define RCC_MP_APB2ENCLRR		U(0xA0C)
-#define RCC_MP_APB3ENSETR		U(0xA10)
-#define RCC_MP_APB3ENCLRR		U(0xA14)
-#define RCC_MP_AHB2ENSETR		U(0xA18)
-#define RCC_MP_AHB2ENCLRR		U(0xA1C)
-#define RCC_MP_AHB3ENSETR		U(0xA20)
-#define RCC_MP_AHB3ENCLRR		U(0xA24)
-#define RCC_MP_AHB4ENSETR		U(0xA28)
-#define RCC_MP_AHB4ENCLRR		U(0xA2C)
-#define RCC_MP_MLAHBENSETR		U(0xA38)
-#define RCC_MP_MLAHBENCLRR		U(0xA3C)
-#define RCC_MC_APB1ENSETR		U(0xA80)
-#define RCC_MC_APB1ENCLRR		U(0xA84)
-#define RCC_MC_APB2ENSETR		U(0xA88)
-#define RCC_MC_APB2ENCLRR		U(0xA8C)
-#define RCC_MC_APB3ENSETR		U(0xA90)
-#define RCC_MC_APB3ENCLRR		U(0xA94)
-#define RCC_MC_AHB2ENSETR		U(0xA98)
-#define RCC_MC_AHB2ENCLRR		U(0xA9C)
-#define RCC_MC_AHB3ENSETR		U(0xAA0)
-#define RCC_MC_AHB3ENCLRR		U(0xAA4)
-#define RCC_MC_AHB4ENSETR		U(0xAA8)
-#define RCC_MC_AHB4ENCLRR		U(0xAAC)
-#define RCC_MC_AXIMENSETR		U(0xAB0)
-#define RCC_MC_AXIMENCLRR		U(0xAB4)
-#define RCC_MC_MLAHBENSETR		U(0xAB8)
-#define RCC_MC_MLAHBENCLRR		U(0xABC)
-#define RCC_MP_APB1LPENSETR		U(0xB00)
-#define RCC_MP_APB1LPENCLRR		U(0xB04)
-#define RCC_MP_APB2LPENSETR		U(0xB08)
-#define RCC_MP_APB2LPENCLRR		U(0xB0C)
-#define RCC_MP_APB3LPENSETR		U(0xB10)
-#define RCC_MP_APB3LPENCLRR		U(0xB14)
-#define RCC_MP_AHB2LPENSETR		U(0xB18)
-#define RCC_MP_AHB2LPENCLRR		U(0xB1C)
-#define RCC_MP_AHB3LPENSETR		U(0xB20)
-#define RCC_MP_AHB3LPENCLRR		U(0xB24)
-#define RCC_MP_AHB4LPENSETR		U(0xB28)
-#define RCC_MP_AHB4LPENCLRR		U(0xB2C)
-#define RCC_MP_AXIMLPENSETR		U(0xB30)
-#define RCC_MP_AXIMLPENCLRR		U(0xB34)
-#define RCC_MP_MLAHBLPENSETR		U(0xB38)
-#define RCC_MP_MLAHBLPENCLRR		U(0xB3C)
-#define RCC_MC_APB1LPENSETR		U(0xB80)
-#define RCC_MC_APB1LPENCLRR		U(0xB84)
-#define RCC_MC_APB2LPENSETR		U(0xB88)
-#define RCC_MC_APB2LPENCLRR		U(0xB8C)
-#define RCC_MC_APB3LPENSETR		U(0xB90)
-#define RCC_MC_APB3LPENCLRR		U(0xB94)
-#define RCC_MC_AHB2LPENSETR		U(0xB98)
-#define RCC_MC_AHB2LPENCLRR		U(0xB9C)
-#define RCC_MC_AHB3LPENSETR		U(0xBA0)
-#define RCC_MC_AHB3LPENCLRR		U(0xBA4)
-#define RCC_MC_AHB4LPENSETR		U(0xBA8)
-#define RCC_MC_AHB4LPENCLRR		U(0xBAC)
-#define RCC_MC_AXIMLPENSETR		U(0xBB0)
-#define RCC_MC_AXIMLPENCLRR		U(0xBB4)
-#define RCC_MC_MLAHBLPENSETR		U(0xBB8)
-#define RCC_MC_MLAHBLPENCLRR		U(0xBBC)
-#define RCC_MC_RSTSCLRR			U(0xC00)
-#define RCC_MC_CIER			U(0xC14)
-#define RCC_MC_CIFR			U(0xC18)
-#define RCC_VERR			U(0xFF4)
-#define RCC_IDR				U(0xFF8)
-#define RCC_SIDR			U(0xFFC)
+#define RCC_TZCR				U(0x00)
+#define RCC_OCENSETR				U(0x0C)
+#define RCC_OCENCLRR				U(0x10)
+#define RCC_HSICFGR				U(0x18)
+#define RCC_CSICFGR				U(0x1C)
+#define RCC_MPCKSELR				U(0x20)
+#define RCC_ASSCKSELR				U(0x24)
+#define RCC_RCK12SELR				U(0x28)
+#define RCC_MPCKDIVR				U(0x2C)
+#define RCC_AXIDIVR				U(0x30)
+#define RCC_APB4DIVR				U(0x3C)
+#define RCC_APB5DIVR				U(0x40)
+#define RCC_RTCDIVR				U(0x44)
+#define RCC_MSSCKSELR				U(0x48)
+#define RCC_PLL1CR				U(0x80)
+#define RCC_PLL1CFGR1				U(0x84)
+#define RCC_PLL1CFGR2				U(0x88)
+#define RCC_PLL1FRACR				U(0x8C)
+#define RCC_PLL1CSGR				U(0x90)
+#define RCC_PLL2CR				U(0x94)
+#define RCC_PLL2CFGR1				U(0x98)
+#define RCC_PLL2CFGR2				U(0x9C)
+#define RCC_PLL2FRACR				U(0xA0)
+#define RCC_PLL2CSGR				U(0xA4)
+#define RCC_I2C46CKSELR				U(0xC0)
+#define RCC_SPI6CKSELR				U(0xC4)
+#define RCC_UART1CKSELR				U(0xC8)
+#define RCC_RNG1CKSELR				U(0xCC)
+#define RCC_CPERCKSELR				U(0xD0)
+#define RCC_STGENCKSELR				U(0xD4)
+#define RCC_DDRITFCR				U(0xD8)
+#define RCC_MP_BOOTCR				U(0x100)
+#define RCC_MP_SREQSETR				U(0x104)
+#define RCC_MP_SREQCLRR				U(0x108)
+#define RCC_MP_GCR				U(0x10C)
+#define RCC_MP_APRSTCR				U(0x110)
+#define RCC_MP_APRSTSR				U(0x114)
+#define RCC_BDCR				U(0x140)
+#define RCC_RDLSICR				U(0x144)
+#define RCC_APB4RSTSETR				U(0x180)
+#define RCC_APB4RSTCLRR				U(0x184)
+#define RCC_APB5RSTSETR				U(0x188)
+#define RCC_APB5RSTCLRR				U(0x18C)
+#define RCC_AHB5RSTSETR				U(0x190)
+#define RCC_AHB5RSTCLRR				U(0x194)
+#define RCC_AHB6RSTSETR				U(0x198)
+#define RCC_AHB6RSTCLRR				U(0x19C)
+#define RCC_TZAHB6RSTSETR			U(0x1A0)
+#define RCC_TZAHB6RSTCLRR			U(0x1A4)
+#define RCC_MP_APB4ENSETR			U(0x200)
+#define RCC_MP_APB4ENCLRR			U(0x204)
+#define RCC_MP_APB5ENSETR			U(0x208)
+#define RCC_MP_APB5ENCLRR			U(0x20C)
+#define RCC_MP_AHB5ENSETR			U(0x210)
+#define RCC_MP_AHB5ENCLRR			U(0x214)
+#define RCC_MP_AHB6ENSETR			U(0x218)
+#define RCC_MP_AHB6ENCLRR			U(0x21C)
+#define RCC_MP_TZAHB6ENSETR			U(0x220)
+#define RCC_MP_TZAHB6ENCLRR			U(0x224)
+#define RCC_MC_APB4ENSETR			U(0x280)
+#define RCC_MC_APB4ENCLRR			U(0x284)
+#define RCC_MC_APB5ENSETR			U(0x288)
+#define RCC_MC_APB5ENCLRR			U(0x28C)
+#define RCC_MC_AHB5ENSETR			U(0x290)
+#define RCC_MC_AHB5ENCLRR			U(0x294)
+#define RCC_MC_AHB6ENSETR			U(0x298)
+#define RCC_MC_AHB6ENCLRR			U(0x29C)
+#define RCC_MP_APB4LPENSETR			U(0x300)
+#define RCC_MP_APB4LPENCLRR			U(0x304)
+#define RCC_MP_APB5LPENSETR			U(0x308)
+#define RCC_MP_APB5LPENCLRR			U(0x30C)
+#define RCC_MP_AHB5LPENSETR			U(0x310)
+#define RCC_MP_AHB5LPENCLRR			U(0x314)
+#define RCC_MP_AHB6LPENSETR			U(0x318)
+#define RCC_MP_AHB6LPENCLRR			U(0x31C)
+#define RCC_MP_TZAHB6LPENSETR			U(0x320)
+#define RCC_MP_TZAHB6LPENCLRR			U(0x324)
+#define RCC_MC_APB4LPENSETR			U(0x380)
+#define RCC_MC_APB4LPENCLRR			U(0x384)
+#define RCC_MC_APB5LPENSETR			U(0x388)
+#define RCC_MC_APB5LPENCLRR			U(0x38C)
+#define RCC_MC_AHB5LPENSETR			U(0x390)
+#define RCC_MC_AHB5LPENCLRR			U(0x394)
+#define RCC_MC_AHB6LPENSETR			U(0x398)
+#define RCC_MC_AHB6LPENCLRR			U(0x39C)
+#define RCC_BR_RSTSCLRR				U(0x400)
+#define RCC_MP_GRSTCSETR			U(0x404)
+#define RCC_MP_RSTSCLRR				U(0x408)
+#define RCC_MP_IWDGFZSETR			U(0x40C)
+#define RCC_MP_IWDGFZCLRR			U(0x410)
+#define RCC_MP_CIER				U(0x414)
+#define RCC_MP_CIFR				U(0x418)
+#define RCC_PWRLPDLYCR				U(0x41C)
+#define RCC_MP_RSTSSETR				U(0x420)
+#define RCC_MCO1CFGR				U(0x800)
+#define RCC_MCO2CFGR				U(0x804)
+#define RCC_OCRDYR				U(0x808)
+#define RCC_DBGCFGR				U(0x80C)
+#define RCC_RCK3SELR				U(0x820)
+#define RCC_RCK4SELR				U(0x824)
+#define RCC_TIMG1PRER				U(0x828)
+#define RCC_TIMG2PRER				U(0x82C)
+#define RCC_MCUDIVR				U(0x830)
+#define RCC_APB1DIVR				U(0x834)
+#define RCC_APB2DIVR				U(0x838)
+#define RCC_APB3DIVR				U(0x83C)
+#define RCC_PLL3CR				U(0x880)
+#define RCC_PLL3CFGR1				U(0x884)
+#define RCC_PLL3CFGR2				U(0x888)
+#define RCC_PLL3FRACR				U(0x88C)
+#define RCC_PLL3CSGR				U(0x890)
+#define RCC_PLL4CR				U(0x894)
+#define RCC_PLL4CFGR1				U(0x898)
+#define RCC_PLL4CFGR2				U(0x89C)
+#define RCC_PLL4FRACR				U(0x8A0)
+#define RCC_PLL4CSGR				U(0x8A4)
+#define RCC_I2C12CKSELR				U(0x8C0)
+#define RCC_I2C35CKSELR				U(0x8C4)
+#define RCC_SAI1CKSELR				U(0x8C8)
+#define RCC_SAI2CKSELR				U(0x8CC)
+#define RCC_SAI3CKSELR				U(0x8D0)
+#define RCC_SAI4CKSELR				U(0x8D4)
+#define RCC_SPI2S1CKSELR			U(0x8D8)
+#define RCC_SPI2S23CKSELR			U(0x8DC)
+#define RCC_SPI45CKSELR				U(0x8E0)
+#define RCC_UART6CKSELR				U(0x8E4)
+#define RCC_UART24CKSELR			U(0x8E8)
+#define RCC_UART35CKSELR			U(0x8EC)
+#define RCC_UART78CKSELR			U(0x8F0)
+#define RCC_SDMMC12CKSELR			U(0x8F4)
+#define RCC_SDMMC3CKSELR			U(0x8F8)
+#define RCC_ETHCKSELR				U(0x8FC)
+#define RCC_QSPICKSELR				U(0x900)
+#define RCC_FMCCKSELR				U(0x904)
+#define RCC_FDCANCKSELR				U(0x90C)
+#define RCC_SPDIFCKSELR				U(0x914)
+#define RCC_CECCKSELR				U(0x918)
+#define RCC_USBCKSELR				U(0x91C)
+#define RCC_RNG2CKSELR				U(0x920)
+#define RCC_DSICKSELR				U(0x924)
+#define RCC_ADCCKSELR				U(0x928)
+#define RCC_LPTIM45CKSELR			U(0x92C)
+#define RCC_LPTIM23CKSELR			U(0x930)
+#define RCC_LPTIM1CKSELR			U(0x934)
+#define RCC_APB1RSTSETR				U(0x980)
+#define RCC_APB1RSTCLRR				U(0x984)
+#define RCC_APB2RSTSETR				U(0x988)
+#define RCC_APB2RSTCLRR				U(0x98C)
+#define RCC_APB3RSTSETR				U(0x990)
+#define RCC_APB3RSTCLRR				U(0x994)
+#define RCC_AHB2RSTSETR				U(0x998)
+#define RCC_AHB2RSTCLRR				U(0x99C)
+#define RCC_AHB3RSTSETR				U(0x9A0)
+#define RCC_AHB3RSTCLRR				U(0x9A4)
+#define RCC_AHB4RSTSETR				U(0x9A8)
+#define RCC_AHB4RSTCLRR				U(0x9AC)
+#define RCC_MP_APB1ENSETR			U(0xA00)
+#define RCC_MP_APB1ENCLRR			U(0xA04)
+#define RCC_MP_APB2ENSETR			U(0xA08)
+#define RCC_MP_APB2ENCLRR			U(0xA0C)
+#define RCC_MP_APB3ENSETR			U(0xA10)
+#define RCC_MP_APB3ENCLRR			U(0xA14)
+#define RCC_MP_AHB2ENSETR			U(0xA18)
+#define RCC_MP_AHB2ENCLRR			U(0xA1C)
+#define RCC_MP_AHB3ENSETR			U(0xA20)
+#define RCC_MP_AHB3ENCLRR			U(0xA24)
+#define RCC_MP_AHB4ENSETR			U(0xA28)
+#define RCC_MP_AHB4ENCLRR			U(0xA2C)
+#define RCC_MP_MLAHBENSETR			U(0xA38)
+#define RCC_MP_MLAHBENCLRR			U(0xA3C)
+#define RCC_MC_APB1ENSETR			U(0xA80)
+#define RCC_MC_APB1ENCLRR			U(0xA84)
+#define RCC_MC_APB2ENSETR			U(0xA88)
+#define RCC_MC_APB2ENCLRR			U(0xA8C)
+#define RCC_MC_APB3ENSETR			U(0xA90)
+#define RCC_MC_APB3ENCLRR			U(0xA94)
+#define RCC_MC_AHB2ENSETR			U(0xA98)
+#define RCC_MC_AHB2ENCLRR			U(0xA9C)
+#define RCC_MC_AHB3ENSETR			U(0xAA0)
+#define RCC_MC_AHB3ENCLRR			U(0xAA4)
+#define RCC_MC_AHB4ENSETR			U(0xAA8)
+#define RCC_MC_AHB4ENCLRR			U(0xAAC)
+#define RCC_MC_AXIMENSETR			U(0xAB0)
+#define RCC_MC_AXIMENCLRR			U(0xAB4)
+#define RCC_MC_MLAHBENSETR			U(0xAB8)
+#define RCC_MC_MLAHBENCLRR			U(0xABC)
+#define RCC_MP_APB1LPENSETR			U(0xB00)
+#define RCC_MP_APB1LPENCLRR			U(0xB04)
+#define RCC_MP_APB2LPENSETR			U(0xB08)
+#define RCC_MP_APB2LPENCLRR			U(0xB0C)
+#define RCC_MP_APB3LPENSETR			U(0xB10)
+#define RCC_MP_APB3LPENCLRR			U(0xB14)
+#define RCC_MP_AHB2LPENSETR			U(0xB18)
+#define RCC_MP_AHB2LPENCLRR			U(0xB1C)
+#define RCC_MP_AHB3LPENSETR			U(0xB20)
+#define RCC_MP_AHB3LPENCLRR			U(0xB24)
+#define RCC_MP_AHB4LPENSETR			U(0xB28)
+#define RCC_MP_AHB4LPENCLRR			U(0xB2C)
+#define RCC_MP_AXIMLPENSETR			U(0xB30)
+#define RCC_MP_AXIMLPENCLRR			U(0xB34)
+#define RCC_MP_MLAHBLPENSETR			U(0xB38)
+#define RCC_MP_MLAHBLPENCLRR			U(0xB3C)
+#define RCC_MC_APB1LPENSETR			U(0xB80)
+#define RCC_MC_APB1LPENCLRR			U(0xB84)
+#define RCC_MC_APB2LPENSETR			U(0xB88)
+#define RCC_MC_APB2LPENCLRR			U(0xB8C)
+#define RCC_MC_APB3LPENSETR			U(0xB90)
+#define RCC_MC_APB3LPENCLRR			U(0xB94)
+#define RCC_MC_AHB2LPENSETR			U(0xB98)
+#define RCC_MC_AHB2LPENCLRR			U(0xB9C)
+#define RCC_MC_AHB3LPENSETR			U(0xBA0)
+#define RCC_MC_AHB3LPENCLRR			U(0xBA4)
+#define RCC_MC_AHB4LPENSETR			U(0xBA8)
+#define RCC_MC_AHB4LPENCLRR			U(0xBAC)
+#define RCC_MC_AXIMLPENSETR			U(0xBB0)
+#define RCC_MC_AXIMLPENCLRR			U(0xBB4)
+#define RCC_MC_MLAHBLPENSETR			U(0xBB8)
+#define RCC_MC_MLAHBLPENCLRR			U(0xBBC)
+#define RCC_MC_RSTSCLRR				U(0xC00)
+#define RCC_MC_CIER				U(0xC14)
+#define RCC_MC_CIFR				U(0xC18)
+#define RCC_VERR				U(0xFF4)
+#define RCC_IDR					U(0xFF8)
+#define RCC_SIDR				U(0xFFC)
 
-#define RCC_OFFSET_MASK			GENMASK(11, 0)
+/* RCC_TZCR register fields */
+#define RCC_TZCR_TZEN				BIT(0)
+#define RCC_TZCR_MCKPROT			BIT(1)
 
-/* Values for RCC_TZCR register */
-#define RCC_TZCR_TZEN			BIT(0)
-#define RCC_TZCR_MCKPROT		BIT(1)
+/* RCC_OCENSETR register fields */
+#define RCC_OCENSETR_HSION			BIT(0)
+#define RCC_OCENSETR_HSIKERON			BIT(1)
+#define RCC_OCENSETR_CSION			BIT(4)
+#define RCC_OCENSETR_CSIKERON			BIT(5)
+#define RCC_OCENSETR_DIGBYP			BIT(7)
+#define RCC_OCENSETR_HSEON			BIT(8)
+#define RCC_OCENSETR_HSEKERON			BIT(9)
+#define RCC_OCENSETR_HSEBYP			BIT(10)
+#define RCC_OCENSETR_HSECSSON			BIT(11)
 
-/* Used for most of RCC_<x>SELR registers */
-#define RCC_SELR_SRC_MASK		GENMASK(2, 0)
-#define RCC_SELR_REFCLK_SRC_MASK	GENMASK(1, 0)
-#define RCC_SELR_SRCRDY			BIT(31)
+/* RCC_OCENCLRR register fields */
+#define RCC_OCENCLRR_HSION			BIT(0)
+#define RCC_OCENCLRR_HSIKERON			BIT(1)
+#define RCC_OCENCLRR_CSION			BIT(4)
+#define RCC_OCENCLRR_CSIKERON			BIT(5)
+#define RCC_OCENCLRR_DIGBYP			BIT(7)
+#define RCC_OCENCLRR_HSEON			BIT(8)
+#define RCC_OCENCLRR_HSEKERON			BIT(9)
+#define RCC_OCENCLRR_HSEBYP			BIT(10)
 
-/* Values of RCC_MPCKSELR register */
-#define RCC_MPCKSELR_HSI		0x00000000
-#define RCC_MPCKSELR_HSE		0x00000001
-#define RCC_MPCKSELR_PLL		0x00000002
-#define RCC_MPCKSELR_PLL_MPUDIV		0x00000003
-#define RCC_MPCKSELR_MPUSRC_MASK	GENMASK(1, 0)
-#define RCC_MPCKSELR_MPUSRC_SHIFT	0
+/* RCC_HSICFGR register fields */
+#define RCC_HSICFGR_HSIDIV_MASK			GENMASK(1, 0)
+#define RCC_HSICFGR_HSIDIV_SHIFT		0
+#define RCC_HSICFGR_HSITRIM_MASK		GENMASK(14, 8)
+#define RCC_HSICFGR_HSITRIM_SHIFT		8
+#define RCC_HSICFGR_HSICAL_MASK			GENMASK(24, 16)
+#define RCC_HSICFGR_HSICAL_SHIFT		16
+#define RCC_HSICFGR_HSICAL_TEMP_MASK		GENMASK(27, 25)
 
-/* Values of RCC_ASSCKSELR register */
-#define RCC_ASSCKSELR_HSI		0x00000000
-#define RCC_ASSCKSELR_HSE		0x00000001
-#define RCC_ASSCKSELR_PLL		0x00000002
+/* RCC_CSICFGR register fields */
+#define RCC_CSICFGR_CSITRIM_MASK		GENMASK(12, 8)
+#define RCC_CSICFGR_CSITRIM_SHIFT		8
+#define RCC_CSICFGR_CSICAL_MASK			GENMASK(23, 16)
+#define RCC_CSICFGR_CSICAL_SHIFT		16
 
-/* Values of RCC_MSSCKSELR register */
-#define RCC_MSSCKSELR_HSI		0x00000000
-#define RCC_MSSCKSELR_HSE		0x00000001
-#define RCC_MSSCKSELR_CSI		0x00000002
-#define RCC_MSSCKSELR_PLL		0x00000003
-
-/* Values of RCC_CPERCKSELR register */
-#define RCC_CPERCKSELR_HSI		0x00000000
-#define RCC_CPERCKSELR_CSI		0x00000001
-#define RCC_CPERCKSELR_HSE		0x00000002
-#define RCC_CPERCKSELR_PERSRC_MASK	GENMASK(1, 0)
-#define RCC_CPERCKSELR_PERSRC_SHIFT	0
-
-/* Used for most of DIVR register: max div for RTC */
-#define RCC_DIVR_DIV_MASK		GENMASK(5, 0)
-#define RCC_DIVR_DIVRDY			BIT(31)
-
-/* Masks for specific DIVR registers */
-#define RCC_APBXDIV_MASK		GENMASK(2, 0)
-#define RCC_MPUDIV_MASK			GENMASK(2, 0)
-#define RCC_AXIDIV_MASK			GENMASK(2, 0)
-#define RCC_MCUDIV_MASK			GENMASK(3, 0)
-
-/* Used for TIMER Prescaler */
-#define RCC_TIMGXPRER_TIMGXPRE		BIT(0)
-
-/* Offset between RCC_MP_xxxENSETR and RCC_MP_xxxENCLRR registers */
-#define RCC_MP_ENCLRR_OFFSET		U(4)
-
-/* Offset between RCC_xxxRSTSETR and RCC_xxxRSTCLRR registers */
-#define RCC_RSTCLRR_OFFSET		U(4)
-
-/* Fields of RCC_BDCR register */
-#define RCC_BDCR_LSEON			BIT(0)
-#define RCC_BDCR_LSEBYP			BIT(1)
-#define RCC_BDCR_LSERDY			BIT(2)
-#define RCC_BDCR_DIGBYP			BIT(3)
-#define RCC_BDCR_LSEDRV_MASK		GENMASK(5, 4)
-#define RCC_BDCR_LSEDRV_SHIFT		4
-#define RCC_BDCR_LSECSSON		BIT(8)
-#define RCC_BDCR_RTCCKEN		BIT(20)
-#define RCC_BDCR_RTCSRC_MASK		GENMASK(17, 16)
-#define RCC_BDCR_RTCSRC_SHIFT		16
-#define RCC_BDCR_VSWRST			BIT(31)
-
-/* Fields of RCC_RDLSICR register */
-#define RCC_RDLSICR_LSION		BIT(0)
-#define RCC_RDLSICR_LSIRDY		BIT(1)
-
-/* Used for all RCC_PLL<n>CR registers */
-#define RCC_PLLNCR_PLLON		BIT(0)
-#define RCC_PLLNCR_PLLRDY		BIT(1)
-#define RCC_PLLNCR_SSCG_CTRL		BIT(2)
-#define RCC_PLLNCR_DIVPEN		BIT(4)
-#define RCC_PLLNCR_DIVQEN		BIT(5)
-#define RCC_PLLNCR_DIVREN		BIT(6)
-#define RCC_PLLNCR_DIVEN_SHIFT		4
-
-/* Used for all RCC_PLL<n>CFGR1 registers */
-#define RCC_PLLNCFGR1_DIVM_SHIFT	16
-#define RCC_PLLNCFGR1_DIVM_MASK		GENMASK(21, 16)
-#define RCC_PLLNCFGR1_DIVN_SHIFT	0
-#define RCC_PLLNCFGR1_DIVN_MASK		GENMASK(8, 0)
-/* Only for PLL3 and PLL4 */
-#define RCC_PLLNCFGR1_IFRGE_SHIFT	24
-#define RCC_PLLNCFGR1_IFRGE_MASK	GENMASK(25, 24)
-
-/* Used for all RCC_PLL<n>CFGR2 registers */
-#define RCC_PLLNCFGR2_DIVX_MASK		GENMASK(6, 0)
-#define RCC_PLLNCFGR2_DIVP_SHIFT	0
-#define RCC_PLLNCFGR2_DIVP_MASK		GENMASK(6, 0)
-#define RCC_PLLNCFGR2_DIVQ_SHIFT	8
-#define RCC_PLLNCFGR2_DIVQ_MASK		GENMASK(14, 8)
-#define RCC_PLLNCFGR2_DIVR_SHIFT	16
-#define RCC_PLLNCFGR2_DIVR_MASK		GENMASK(22, 16)
-
-/* Used for all RCC_PLL<n>FRACR registers */
-#define RCC_PLLNFRACR_FRACV_SHIFT	3
-#define RCC_PLLNFRACR_FRACV_MASK	GENMASK(15, 3)
-#define RCC_PLLNFRACR_FRACLE		BIT(16)
-
-/* Used for all RCC_PLL<n>CSGR registers */
-#define RCC_PLLNCSGR_INC_STEP_SHIFT	16
-#define RCC_PLLNCSGR_INC_STEP_MASK	GENMASK(30, 16)
-#define RCC_PLLNCSGR_MOD_PER_SHIFT	0
-#define RCC_PLLNCSGR_MOD_PER_MASK	GENMASK(12, 0)
-#define RCC_PLLNCSGR_SSCG_MODE_SHIFT	15
-#define RCC_PLLNCSGR_SSCG_MODE_MASK	BIT(15)
-
-/* Used for RCC_OCENSETR and RCC_OCENCLRR registers */
-#define RCC_OCENR_HSION			BIT(0)
-#define RCC_OCENR_HSIKERON		BIT(1)
-#define RCC_OCENR_CSION			BIT(4)
-#define RCC_OCENR_CSIKERON		BIT(5)
-#define RCC_OCENR_DIGBYP		BIT(7)
-#define RCC_OCENR_HSEON			BIT(8)
-#define RCC_OCENR_HSEKERON		BIT(9)
-#define RCC_OCENR_HSEBYP		BIT(10)
-#define RCC_OCENR_HSECSSON		BIT(11)
-
-/* Fields of RCC_OCRDYR register */
-#define RCC_OCRDYR_HSIRDY		BIT(0)
-#define RCC_OCRDYR_HSIDIVRDY		BIT(2)
-#define RCC_OCRDYR_CSIRDY		BIT(4)
-#define RCC_OCRDYR_HSERDY		BIT(8)
-
-/* Fields of RCC_DDRITFCR register */
-#define RCC_DDRITFCR_DDRC1EN		BIT(0)
-#define RCC_DDRITFCR_DDRC1LPEN		BIT(1)
-#define RCC_DDRITFCR_DDRC2EN		BIT(2)
-#define RCC_DDRITFCR_DDRC2LPEN		BIT(3)
-#define RCC_DDRITFCR_DDRPHYCEN		BIT(4)
-#define RCC_DDRITFCR_DDRPHYCLPEN	BIT(5)
-#define RCC_DDRITFCR_DDRCAPBEN		BIT(6)
-#define RCC_DDRITFCR_DDRCAPBLPEN	BIT(7)
-#define RCC_DDRITFCR_AXIDCGEN		BIT(8)
-#define RCC_DDRITFCR_DDRPHYCAPBEN	BIT(9)
-#define RCC_DDRITFCR_DDRPHYCAPBLPEN	BIT(10)
-#define RCC_DDRITFCR_DDRCAPBRST		BIT(14)
-#define RCC_DDRITFCR_DDRCAXIRST		BIT(15)
-#define RCC_DDRITFCR_DDRCORERST		BIT(16)
-#define RCC_DDRITFCR_DPHYAPBRST		BIT(17)
-#define RCC_DDRITFCR_DPHYRST		BIT(18)
-#define RCC_DDRITFCR_DPHYCTLRST		BIT(19)
-#define RCC_DDRITFCR_DDRCKMOD_MASK	GENMASK(22, 20)
-#define RCC_DDRITFCR_DDRCKMOD_SHIFT	20
-#define RCC_DDRITFCR_DDRCKMOD_SSR	0
-#define RCC_DDRITFCR_DDRCKMOD_ASR1	BIT(20)
-#define RCC_DDRITFCR_DDRCKMOD_HSR1	BIT(21)
-#define RCC_DDRITFCR_GSKPCTRL		BIT(24)
-
-/* Fields of RCC_HSICFGR register */
-#define RCC_HSICFGR_HSIDIV_MASK		GENMASK(1, 0)
-#define RCC_HSICFGR_HSITRIM_SHIFT	8
-#define RCC_HSICFGR_HSITRIM_MASK	GENMASK(14, 8)
-#define RCC_HSICFGR_HSICAL_SHIFT	16
-#define RCC_HSICFGR_HSICAL_MASK		GENMASK(27, 16)
-
-/* Fields of RCC_CSICFGR register */
-#define RCC_CSICFGR_CSITRIM_SHIFT	8
-#define RCC_CSICFGR_CSITRIM_MASK	GENMASK(12, 8)
-#define RCC_CSICFGR_CSICAL_SHIFT	16
-#define RCC_CSICFGR_CSICAL_MASK		GENMASK(23, 16)
-
-/* Used for RCC_MCO related operations */
-#define RCC_MCOCFG_MCOON		BIT(12)
-#define RCC_MCOCFG_MCODIV_MASK		GENMASK(7, 4)
-#define RCC_MCOCFG_MCODIV_SHIFT		4
-#define RCC_MCOCFG_MCOSRC_MASK		GENMASK(2, 0)
-
-/* Fields of RCC_DBGCFGR register */
-#define RCC_DBGCFGR_DBGCKEN		BIT(8)
-
-/* RCC register fields for reset reasons */
-#define RCC_MP_RSTSCLRR_PORRSTF		BIT(0)
-#define RCC_MP_RSTSCLRR_BORRSTF		BIT(1)
-#define RCC_MP_RSTSCLRR_PADRSTF		BIT(2)
-#define RCC_MP_RSTSCLRR_HCSSRSTF	BIT(3)
-#define RCC_MP_RSTSCLRR_VCORERSTF	BIT(4)
-#define RCC_MP_RSTSCLRR_MPSYSRSTF	BIT(6)
-#define RCC_MP_RSTSCLRR_MCSYSRSTF	BIT(7)
-#define RCC_MP_RSTSCLRR_IWDG1RSTF	BIT(8)
-#define RCC_MP_RSTSCLRR_IWDG2RSTF	BIT(9)
-#define RCC_MP_RSTSCLRR_STDBYRSTF	BIT(11)
-#define RCC_MP_RSTSCLRR_CSTDBYRSTF	BIT(12)
-#define RCC_MP_RSTSCLRR_MPUP0RSTF	BIT(13)
-#define RCC_MP_RSTSCLRR_MPUP1RSTF	BIT(14)
-
-/* Global Reset Register */
-#define RCC_MP_GRSTCSETR_MPSYSRST	BIT(0)
-#define RCC_MP_GRSTCSETR_MCURST		BIT(1)
-#define RCC_MP_GRSTCSETR_MPUP0RST	BIT(4)
-#define RCC_MP_GRSTCSETR_MPUP1RST	BIT(5)
-
-/* Clock Source Interrupt Flag Register */
-#define RCC_MP_CIFR_MASK		U(0x110F1F)
-#define RCC_MP_CIFR_LSIRDYF		BIT(0)
-#define RCC_MP_CIFR_LSERDYF		BIT(1)
-#define RCC_MP_CIFR_HSIRDYF		BIT(2)
-#define RCC_MP_CIFR_HSERDYF		BIT(3)
-#define RCC_MP_CIFR_CSIRDYF		BIT(4)
-#define RCC_MP_CIFR_PLL1DYF		BIT(8)
-#define RCC_MP_CIFR_PLL2DYF		BIT(9)
-#define RCC_MP_CIFR_PLL3DYF		BIT(10)
-#define RCC_MP_CIFR_PLL4DYF		BIT(11)
-#define RCC_MP_CIFR_WKUPF		BIT(20)
-
-/* Stop Request Set Register */
-#define RCC_MP_SREQSETR_STPREQ_P0	BIT(0)
-#define RCC_MP_SREQSETR_STPREQ_P1	BIT(1)
-
-/* Stop Request Clear Register */
-#define RCC_MP_SREQCLRR_STPREQ_P0	BIT(0)
-#define RCC_MP_SREQCLRR_STPREQ_P1	BIT(1)
-
-/* Values of RCC_UART24CKSELR register */
-#define RCC_UART24CKSELR_HSI		0x00000002
-
-/* Values of RCC_MP_APB1ENSETR register */
-#define RCC_MP_APB1ENSETR_UART4EN	BIT(16)
-
-/* Values of RCC_MP_APB5ENSETR register */
-#define RCC_MP_APB5ENSETR_SPI6EN	BIT(0)
-#define RCC_MP_APB5ENSETR_I2C4EN	BIT(2)
-#define RCC_MP_APB5ENSETR_I2C6EN	BIT(3)
-#define RCC_MP_APB5ENSETR_USART1EN	BIT(4)
-#define RCC_MP_APB5ENSETR_RTCAPBEN	BIT(8)
-#define RCC_MP_APB5ENSETR_IWDG1APBEN	BIT(15)
-
-/* Values of RCC_MP_AHB4ENSETR register */
-#define RCC_MP_AHB4ENSETR_GPIOGEN	BIT(6)
-#define RCC_MP_AHB4ENSETR_GPIOHEN	BIT(7)
-
-/* Values of RCC_MP_AHB5ENSETR register */
-#define RCC_MP_AHB5ENSETR_GPIOZEN	BIT(0)
-#define RCC_MP_AHB5ENSETR_CRYP1EN	BIT(4)
-#define RCC_MP_AHB5ENSETR_HASH1EN	BIT(5)
-#define RCC_MP_AHB5ENSETR_RNG1EN	BIT(6)
-
-/* Values of RCC_MP_IWDGFZSETR register */
-#define RCC_MP_IWDGFZSETR_IWDG1		BIT(0)
-#define RCC_MP_IWDGFZSETR_IWDG2		BIT(1)
-
-/* Values of RCC_PWRLPDLYCR register */
-#define RCC_PWRLPDLYCR_PWRLP_DLY_MASK	GENMASK(21, 0)
+/* RCC_MPCKSELR register fields */
+#define RCC_MPCKSELR_HSI			0x00000000
+#define RCC_MPCKSELR_HSE			0x00000001
+#define RCC_MPCKSELR_PLL			0x00000002
+#define RCC_MPCKSELR_PLL_MPUDIV			0x00000003
+#define RCC_MPCKSELR_MPUSRC_MASK		GENMASK(1, 0)
+#define RCC_MPCKSELR_MPUSRC_SHIFT		0
+#define RCC_MPCKSELR_MPUSRCRDY			BIT(31)
 
 /* RCC_ASSCKSELR register fields */
+#define RCC_ASSCKSELR_HSI			0x00000000
+#define RCC_ASSCKSELR_HSE			0x00000001
+#define RCC_ASSCKSELR_PLL			0x00000002
 #define RCC_ASSCKSELR_AXISSRC_MASK		GENMASK(2, 0)
 #define RCC_ASSCKSELR_AXISSRC_SHIFT		0
+#define RCC_ASSCKSELR_AXISSRCRDY		BIT(31)
+
+/* RCC_RCK12SELR register fields */
+#define RCC_RCK12SELR_PLL12SRC_MASK		GENMASK(1, 0)
+#define RCC_RCK12SELR_PLL12SRC_SHIFT		0
+#define RCC_RCK12SELR_PLL12SRCRDY		BIT(31)
+
+/* RCC_MPCKDIVR register fields */
+#define RCC_MPCKDIVR_MPUDIV_MASK		GENMASK(2, 0)
+#define RCC_MPCKDIVR_MPUDIV_SHIFT		0
+#define RCC_MPCKDIVR_MPUDIVRDY			BIT(31)
+
+/* RCC_AXIDIVR register fields */
+#define RCC_AXIDIVR_AXIDIV_MASK			GENMASK(2, 0)
+#define RCC_AXIDIVR_AXIDIV_SHIFT		0
+#define RCC_AXIDIVR_AXIDIVRDY			BIT(31)
+
+/* RCC_APB4DIVR register fields */
+#define RCC_APB4DIVR_APB4DIV_MASK		GENMASK(2, 0)
+#define RCC_APB4DIVR_APB4DIV_SHIFT		0
+#define RCC_APB4DIVR_APB4DIVRDY			BIT(31)
+
+/* RCC_APB5DIVR register fields */
+#define RCC_APB5DIVR_APB5DIV_MASK		GENMASK(2, 0)
+#define RCC_APB5DIVR_APB5DIV_SHIFT		0
+#define RCC_APB5DIVR_APB5DIVRDY			BIT(31)
+
+/* RCC_RTCDIVR register fields */
+#define RCC_RTCDIVR_RTCDIV_MASK			GENMASK(5, 0)
+#define RCC_RTCDIVR_RTCDIV_SHIFT		0
 
 /* RCC_MSSCKSELR register fields */
+#define RCC_MSSCKSELR_HSI			0x00000000
+#define RCC_MSSCKSELR_HSE			0x00000001
+#define RCC_MSSCKSELR_CSI			0x00000002
+#define RCC_MSSCKSELR_PLL			0x00000003
 #define RCC_MSSCKSELR_MCUSSRC_MASK		GENMASK(1, 0)
 #define RCC_MSSCKSELR_MCUSSRC_SHIFT		0
+#define RCC_MSSCKSELR_MCUSSRCRDY		BIT(31)
+
+/* RCC_PLL1CR register fields */
+#define RCC_PLL1CR_PLLON			BIT(0)
+#define RCC_PLL1CR_PLL1RDY			BIT(1)
+#define RCC_PLL1CR_SSCG_CTRL			BIT(2)
+#define RCC_PLL1CR_DIVPEN			BIT(4)
+#define RCC_PLL1CR_DIVQEN			BIT(5)
+#define RCC_PLL1CR_DIVREN			BIT(6)
+
+/* RCC_PLL1CFGR1 register fields */
+#define RCC_PLL1CFGR1_DIVN_MASK			GENMASK(8, 0)
+#define RCC_PLL1CFGR1_DIVN_SHIFT		0
+#define RCC_PLL1CFGR1_DIVM1_MASK		GENMASK(21, 16)
+#define RCC_PLL1CFGR1_DIVM1_SHIFT		16
+
+/* RCC_PLL1CFGR2 register fields */
+#define RCC_PLL1CFGR2_DIVP_MASK			GENMASK(6, 0)
+#define RCC_PLL1CFGR2_DIVP_SHIFT		0
+#define RCC_PLL1CFGR2_DIVQ_MASK			GENMASK(14, 8)
+#define RCC_PLL1CFGR2_DIVQ_SHIFT		8
+#define RCC_PLL1CFGR2_DIVR_MASK			GENMASK(22, 16)
+#define RCC_PLL1CFGR2_DIVR_SHIFT		16
+
+/* RCC_PLL1FRACR register fields */
+#define RCC_PLL1FRACR_FRACV_MASK		GENMASK(15, 3)
+#define RCC_PLL1FRACR_FRACV_SHIFT		3
+#define RCC_PLL1FRACR_FRACLE			BIT(16)
+
+/* RCC_PLL1CSGR register fields */
+#define RCC_PLL1CSGR_MOD_PER_MASK		GENMASK(12, 0)
+#define RCC_PLL1CSGR_MOD_PER_SHIFT		0
+#define RCC_PLL1CSGR_TPDFN_DIS			BIT(13)
+#define RCC_PLL1CSGR_RPDFN_DIS			BIT(14)
+#define RCC_PLL1CSGR_SSCG_MODE			BIT(15)
+#define RCC_PLL1CSGR_INC_STEP_MASK		GENMASK(30, 16)
+#define RCC_PLL1CSGR_INC_STEP_SHIFT		16
+
+/* RCC_PLL2CR register fields */
+#define RCC_PLL2CR_PLLON			BIT(0)
+#define RCC_PLL2CR_PLL2RDY			BIT(1)
+#define RCC_PLL2CR_SSCG_CTRL			BIT(2)
+#define RCC_PLL2CR_DIVPEN			BIT(4)
+#define RCC_PLL2CR_DIVQEN			BIT(5)
+#define RCC_PLL2CR_DIVREN			BIT(6)
+
+/* RCC_PLL2CFGR1 register fields */
+#define RCC_PLL2CFGR1_DIVN_MASK			GENMASK(8, 0)
+#define RCC_PLL2CFGR1_DIVN_SHIFT		0
+#define RCC_PLL2CFGR1_DIVM2_MASK		GENMASK(21, 16)
+#define RCC_PLL2CFGR1_DIVM2_SHIFT		16
+
+/* RCC_PLL2CFGR2 register fields */
+#define RCC_PLL2CFGR2_DIVP_MASK			GENMASK(6, 0)
+#define RCC_PLL2CFGR2_DIVP_SHIFT		0
+#define RCC_PLL2CFGR2_DIVQ_MASK			GENMASK(14, 8)
+#define RCC_PLL2CFGR2_DIVQ_SHIFT		8
+#define RCC_PLL2CFGR2_DIVR_MASK			GENMASK(22, 16)
+#define RCC_PLL2CFGR2_DIVR_SHIFT		16
+
+/* RCC_PLL2FRACR register fields */
+#define RCC_PLL2FRACR_FRACV_MASK		GENMASK(15, 3)
+#define RCC_PLL2FRACR_FRACV_SHIFT		3
+#define RCC_PLL2FRACR_FRACLE			BIT(16)
+
+/* RCC_PLL2CSGR register fields */
+#define RCC_PLL2CSGR_MOD_PER_MASK		GENMASK(12, 0)
+#define RCC_PLL2CSGR_MOD_PER_SHIFT		0
+#define RCC_PLL2CSGR_TPDFN_DIS			BIT(13)
+#define RCC_PLL2CSGR_RPDFN_DIS			BIT(14)
+#define RCC_PLL2CSGR_SSCG_MODE			BIT(15)
+#define RCC_PLL2CSGR_INC_STEP_MASK		GENMASK(30, 16)
+#define RCC_PLL2CSGR_INC_STEP_SHIFT		16
 
 /* RCC_I2C46CKSELR register fields */
 #define RCC_I2C46CKSELR_I2C46SRC_MASK		GENMASK(2, 0)
@@ -508,10 +417,751 @@
 #define RCC_RNG1CKSELR_RNG1SRC_MASK		GENMASK(1, 0)
 #define RCC_RNG1CKSELR_RNG1SRC_SHIFT		0
 
+/* RCC_CPERCKSELR register fields */
+#define RCC_CPERCKSELR_HSI			0x00000000
+#define RCC_CPERCKSELR_CSI			0x00000001
+#define RCC_CPERCKSELR_HSE			0x00000002
+#define RCC_CPERCKSELR_CKPERSRC_MASK		GENMASK(1, 0)
+#define RCC_CPERCKSELR_CKPERSRC_SHIFT		0
+
 /* RCC_STGENCKSELR register fields */
 #define RCC_STGENCKSELR_STGENSRC_MASK		GENMASK(1, 0)
 #define RCC_STGENCKSELR_STGENSRC_SHIFT		0
 
+/* RCC_DDRITFCR register fields */
+#define RCC_DDRITFCR_DDRC1EN			BIT(0)
+#define RCC_DDRITFCR_DDRC1LPEN			BIT(1)
+#define RCC_DDRITFCR_DDRC2EN			BIT(2)
+#define RCC_DDRITFCR_DDRC2LPEN			BIT(3)
+#define RCC_DDRITFCR_DDRPHYCEN			BIT(4)
+#define RCC_DDRITFCR_DDRPHYCLPEN		BIT(5)
+#define RCC_DDRITFCR_DDRCAPBEN			BIT(6)
+#define RCC_DDRITFCR_DDRCAPBLPEN		BIT(7)
+#define RCC_DDRITFCR_AXIDCGEN			BIT(8)
+#define RCC_DDRITFCR_DDRPHYCAPBEN		BIT(9)
+#define RCC_DDRITFCR_DDRPHYCAPBLPEN		BIT(10)
+#define RCC_DDRITFCR_KERDCG_DLY_MASK		GENMASK(13, 11)
+#define RCC_DDRITFCR_KERDCG_DLY_SHIFT		11
+#define RCC_DDRITFCR_DDRCAPBRST			BIT(14)
+#define RCC_DDRITFCR_DDRCAXIRST			BIT(15)
+#define RCC_DDRITFCR_DDRCORERST			BIT(16)
+#define RCC_DDRITFCR_DPHYAPBRST			BIT(17)
+#define RCC_DDRITFCR_DPHYRST			BIT(18)
+#define RCC_DDRITFCR_DPHYCTLRST			BIT(19)
+#define RCC_DDRITFCR_DDRCKMOD_MASK		GENMASK(22, 20)
+#define RCC_DDRITFCR_DDRCKMOD_SHIFT		20
+#define RCC_DDRITFCR_DDRCKMOD_SSR		0
+#define RCC_DDRITFCR_DDRCKMOD_ASR1		BIT(20)
+#define RCC_DDRITFCR_DDRCKMOD_HSR1		BIT(21)
+#define RCC_DDRITFCR_GSKPMOD			BIT(23)
+#define RCC_DDRITFCR_GSKPCTRL			BIT(24)
+#define RCC_DDRITFCR_DFILP_WIDTH_MASK		GENMASK(27, 25)
+#define RCC_DDRITFCR_DFILP_WIDTH_SHIFT		25
+#define RCC_DDRITFCR_GSKP_DUR_MASK		GENMASK(31, 28)
+#define RCC_DDRITFCR_GSKP_DUR_SHIFT		28
+
+/* RCC_MP_BOOTCR register fields */
+#define RCC_MP_BOOTCR_MCU_BEN			BIT(0)
+#define RCC_MP_BOOTCR_MPU_BEN			BIT(1)
+
+/* RCC_MP_SREQSETR register fields */
+#define RCC_MP_SREQSETR_STPREQ_P0		BIT(0)
+#define RCC_MP_SREQSETR_STPREQ_P1		BIT(1)
+
+/* RCC_MP_SREQCLRR register fields */
+#define RCC_MP_SREQCLRR_STPREQ_P0		BIT(0)
+#define RCC_MP_SREQCLRR_STPREQ_P1		BIT(1)
+
+/* RCC_MP_GCR register fields */
+#define RCC_MP_GCR_BOOT_MCU			BIT(0)
+
+/* RCC_MP_APRSTCR register fields */
+#define RCC_MP_APRSTCR_RDCTLEN			BIT(0)
+#define RCC_MP_APRSTCR_RSTTO_MASK		GENMASK(14, 8)
+#define RCC_MP_APRSTCR_RSTTO_SHIFT		8
+
+/* RCC_MP_APRSTSR register fields */
+#define RCC_MP_APRSTSR_RSTTOV_MASK		GENMASK(14, 8)
+#define RCC_MP_APRSTSR_RSTTOV_SHIFT		8
+
+/* RCC_BDCR register fields */
+#define RCC_BDCR_LSEON				BIT(0)
+#define RCC_BDCR_LSEBYP				BIT(1)
+#define RCC_BDCR_LSERDY				BIT(2)
+#define RCC_BDCR_DIGBYP				BIT(3)
+#define RCC_BDCR_LSEDRV_MASK			GENMASK(5, 4)
+#define RCC_BDCR_LSEDRV_SHIFT			4
+#define RCC_BDCR_LSECSSON			BIT(8)
+#define RCC_BDCR_LSECSSD			BIT(9)
+#define RCC_BDCR_RTCSRC_MASK			GENMASK(17, 16)
+#define RCC_BDCR_RTCSRC_SHIFT			16
+#define RCC_BDCR_RTCCKEN			BIT(20)
+#define RCC_BDCR_VSWRST				BIT(31)
+
+/* RCC_RDLSICR register fields */
+#define RCC_RDLSICR_LSION			BIT(0)
+#define RCC_RDLSICR_LSIRDY			BIT(1)
+#define RCC_RDLSICR_MRD_MASK			GENMASK(20, 16)
+#define RCC_RDLSICR_MRD_SHIFT			16
+#define RCC_RDLSICR_EADLY_MASK			GENMASK(26, 24)
+#define RCC_RDLSICR_EADLY_SHIFT			24
+#define RCC_RDLSICR_SPARE_MASK			GENMASK(31, 27)
+#define RCC_RDLSICR_SPARE_SHIFT			27
+
+/* RCC_APB4RSTSETR register fields */
+#define RCC_APB4RSTSETR_LTDCRST			BIT(0)
+#define RCC_APB4RSTSETR_DSIRST			BIT(4)
+#define RCC_APB4RSTSETR_DDRPERFMRST		BIT(8)
+#define RCC_APB4RSTSETR_USBPHYRST		BIT(16)
+
+/* RCC_APB4RSTCLRR register fields */
+#define RCC_APB4RSTCLRR_LTDCRST			BIT(0)
+#define RCC_APB4RSTCLRR_DSIRST			BIT(4)
+#define RCC_APB4RSTCLRR_DDRPERFMRST		BIT(8)
+#define RCC_APB4RSTCLRR_USBPHYRST		BIT(16)
+
+/* RCC_APB5RSTSETR register fields */
+#define RCC_APB5RSTSETR_SPI6RST			BIT(0)
+#define RCC_APB5RSTSETR_I2C4RST			BIT(2)
+#define RCC_APB5RSTSETR_I2C6RST			BIT(3)
+#define RCC_APB5RSTSETR_USART1RST		BIT(4)
+#define RCC_APB5RSTSETR_STGENRST		BIT(20)
+
+/* RCC_APB5RSTCLRR register fields */
+#define RCC_APB5RSTCLRR_SPI6RST			BIT(0)
+#define RCC_APB5RSTCLRR_I2C4RST			BIT(2)
+#define RCC_APB5RSTCLRR_I2C6RST			BIT(3)
+#define RCC_APB5RSTCLRR_USART1RST		BIT(4)
+#define RCC_APB5RSTCLRR_STGENRST		BIT(20)
+
+/* RCC_AHB5RSTSETR register fields */
+#define RCC_AHB5RSTSETR_GPIOZRST		BIT(0)
+#define RCC_AHB5RSTSETR_CRYP1RST		BIT(4)
+#define RCC_AHB5RSTSETR_HASH1RST		BIT(5)
+#define RCC_AHB5RSTSETR_RNG1RST			BIT(6)
+#define RCC_AHB5RSTSETR_AXIMCRST		BIT(16)
+
+/* RCC_AHB5RSTCLRR register fields */
+#define RCC_AHB5RSTCLRR_GPIOZRST		BIT(0)
+#define RCC_AHB5RSTCLRR_CRYP1RST		BIT(4)
+#define RCC_AHB5RSTCLRR_HASH1RST		BIT(5)
+#define RCC_AHB5RSTCLRR_RNG1RST			BIT(6)
+#define RCC_AHB5RSTCLRR_AXIMCRST		BIT(16)
+
+/* RCC_AHB6RSTSETR register fields */
+#define RCC_AHB6RSTSETR_GPURST			BIT(5)
+#define RCC_AHB6RSTSETR_ETHMACRST		BIT(10)
+#define RCC_AHB6RSTSETR_FMCRST			BIT(12)
+#define RCC_AHB6RSTSETR_QSPIRST			BIT(14)
+#define RCC_AHB6RSTSETR_SDMMC1RST		BIT(16)
+#define RCC_AHB6RSTSETR_SDMMC2RST		BIT(17)
+#define RCC_AHB6RSTSETR_CRC1RST			BIT(20)
+#define RCC_AHB6RSTSETR_USBHRST			BIT(24)
+
+/* RCC_AHB6RSTCLRR register fields */
+#define RCC_AHB6RSTCLRR_ETHMACRST		BIT(10)
+#define RCC_AHB6RSTCLRR_FMCRST			BIT(12)
+#define RCC_AHB6RSTCLRR_QSPIRST			BIT(14)
+#define RCC_AHB6RSTCLRR_SDMMC1RST		BIT(16)
+#define RCC_AHB6RSTCLRR_SDMMC2RST		BIT(17)
+#define RCC_AHB6RSTCLRR_CRC1RST			BIT(20)
+#define RCC_AHB6RSTCLRR_USBHRST			BIT(24)
+
+/* RCC_TZAHB6RSTSETR register fields */
+#define RCC_TZAHB6RSTSETR_MDMARST		BIT(0)
+
+/* RCC_TZAHB6RSTCLRR register fields */
+#define RCC_TZAHB6RSTCLRR_MDMARST		BIT(0)
+
+/* RCC_MP_APB4ENSETR register fields */
+#define RCC_MP_APB4ENSETR_LTDCEN		BIT(0)
+#define RCC_MP_APB4ENSETR_DSIEN			BIT(4)
+#define RCC_MP_APB4ENSETR_DDRPERFMEN		BIT(8)
+#define RCC_MP_APB4ENSETR_IWDG2APBEN		BIT(15)
+#define RCC_MP_APB4ENSETR_USBPHYEN		BIT(16)
+#define RCC_MP_APB4ENSETR_STGENROEN		BIT(20)
+
+/* RCC_MP_APB4ENCLRR register fields */
+#define RCC_MP_APB4ENCLRR_LTDCEN		BIT(0)
+#define RCC_MP_APB4ENCLRR_DSIEN			BIT(4)
+#define RCC_MP_APB4ENCLRR_DDRPERFMEN		BIT(8)
+#define RCC_MP_APB4ENCLRR_IWDG2APBEN		BIT(15)
+#define RCC_MP_APB4ENCLRR_USBPHYEN		BIT(16)
+#define RCC_MP_APB4ENCLRR_STGENROEN		BIT(20)
+
+/* RCC_MP_APB5ENSETR register fields */
+#define RCC_MP_APB5ENSETR_SPI6EN		BIT(0)
+#define RCC_MP_APB5ENSETR_I2C4EN		BIT(2)
+#define RCC_MP_APB5ENSETR_I2C6EN		BIT(3)
+#define RCC_MP_APB5ENSETR_USART1EN		BIT(4)
+#define RCC_MP_APB5ENSETR_RTCAPBEN		BIT(8)
+#define RCC_MP_APB5ENSETR_TZC1EN		BIT(11)
+#define RCC_MP_APB5ENSETR_TZC2EN		BIT(12)
+#define RCC_MP_APB5ENSETR_TZPCEN		BIT(13)
+#define RCC_MP_APB5ENSETR_IWDG1APBEN		BIT(15)
+#define RCC_MP_APB5ENSETR_BSECEN		BIT(16)
+#define RCC_MP_APB5ENSETR_STGENEN		BIT(20)
+
+/* RCC_MP_APB5ENCLRR register fields */
+#define RCC_MP_APB5ENCLRR_SPI6EN		BIT(0)
+#define RCC_MP_APB5ENCLRR_I2C4EN		BIT(2)
+#define RCC_MP_APB5ENCLRR_I2C6EN		BIT(3)
+#define RCC_MP_APB5ENCLRR_USART1EN		BIT(4)
+#define RCC_MP_APB5ENCLRR_RTCAPBEN		BIT(8)
+#define RCC_MP_APB5ENCLRR_TZC1EN		BIT(11)
+#define RCC_MP_APB5ENCLRR_TZC2EN		BIT(12)
+#define RCC_MP_APB5ENCLRR_TZPCEN		BIT(13)
+#define RCC_MP_APB5ENCLRR_IWDG1APBEN		BIT(15)
+#define RCC_MP_APB5ENCLRR_BSECEN		BIT(16)
+#define RCC_MP_APB5ENCLRR_STGENEN		BIT(20)
+
+/* RCC_MP_AHB5ENSETR register fields */
+#define RCC_MP_AHB5ENSETR_GPIOZEN		BIT(0)
+#define RCC_MP_AHB5ENSETR_CRYP1EN		BIT(4)
+#define RCC_MP_AHB5ENSETR_HASH1EN		BIT(5)
+#define RCC_MP_AHB5ENSETR_RNG1EN		BIT(6)
+#define RCC_MP_AHB5ENSETR_BKPSRAMEN		BIT(8)
+#define RCC_MP_AHB5ENSETR_AXIMCEN		BIT(16)
+
+/* RCC_MP_AHB5ENCLRR register fields */
+#define RCC_MP_AHB5ENCLRR_GPIOZEN		BIT(0)
+#define RCC_MP_AHB5ENCLRR_CRYP1EN		BIT(4)
+#define RCC_MP_AHB5ENCLRR_HASH1EN		BIT(5)
+#define RCC_MP_AHB5ENCLRR_RNG1EN		BIT(6)
+#define RCC_MP_AHB5ENCLRR_BKPSRAMEN		BIT(8)
+#define RCC_MP_AHB5ENCLRR_AXIMCEN		BIT(16)
+
+/* RCC_MP_AHB6ENSETR register fields */
+#define RCC_MP_AHB6ENSETR_MDMAEN		BIT(0)
+#define RCC_MP_AHB6ENSETR_GPUEN			BIT(5)
+#define RCC_MP_AHB6ENSETR_ETHCKEN		BIT(7)
+#define RCC_MP_AHB6ENSETR_ETHTXEN		BIT(8)
+#define RCC_MP_AHB6ENSETR_ETHRXEN		BIT(9)
+#define RCC_MP_AHB6ENSETR_ETHMACEN		BIT(10)
+#define RCC_MP_AHB6ENSETR_FMCEN			BIT(12)
+#define RCC_MP_AHB6ENSETR_QSPIEN		BIT(14)
+#define RCC_MP_AHB6ENSETR_SDMMC1EN		BIT(16)
+#define RCC_MP_AHB6ENSETR_SDMMC2EN		BIT(17)
+#define RCC_MP_AHB6ENSETR_CRC1EN		BIT(20)
+#define RCC_MP_AHB6ENSETR_USBHEN		BIT(24)
+
+/* RCC_MP_AHB6ENCLRR register fields */
+#define RCC_MP_AHB6ENCLRR_MDMAEN		BIT(0)
+#define RCC_MP_AHB6ENCLRR_GPUEN			BIT(5)
+#define RCC_MP_AHB6ENCLRR_ETHCKEN		BIT(7)
+#define RCC_MP_AHB6ENCLRR_ETHTXEN		BIT(8)
+#define RCC_MP_AHB6ENCLRR_ETHRXEN		BIT(9)
+#define RCC_MP_AHB6ENCLRR_ETHMACEN		BIT(10)
+#define RCC_MP_AHB6ENCLRR_FMCEN			BIT(12)
+#define RCC_MP_AHB6ENCLRR_QSPIEN		BIT(14)
+#define RCC_MP_AHB6ENCLRR_SDMMC1EN		BIT(16)
+#define RCC_MP_AHB6ENCLRR_SDMMC2EN		BIT(17)
+#define RCC_MP_AHB6ENCLRR_CRC1EN		BIT(20)
+#define RCC_MP_AHB6ENCLRR_USBHEN		BIT(24)
+
+/* RCC_MP_TZAHB6ENSETR register fields */
+#define RCC_MP_TZAHB6ENSETR_MDMAEN		BIT(0)
+
+/* RCC_MP_TZAHB6ENCLRR register fields */
+#define RCC_MP_TZAHB6ENCLRR_MDMAEN		BIT(0)
+
+/* RCC_MC_APB4ENSETR register fields */
+#define RCC_MC_APB4ENSETR_LTDCEN		BIT(0)
+#define RCC_MC_APB4ENSETR_DSIEN			BIT(4)
+#define RCC_MC_APB4ENSETR_DDRPERFMEN		BIT(8)
+#define RCC_MC_APB4ENSETR_USBPHYEN		BIT(16)
+#define RCC_MC_APB4ENSETR_STGENROEN		BIT(20)
+
+/* RCC_MC_APB4ENCLRR register fields */
+#define RCC_MC_APB4ENCLRR_LTDCEN		BIT(0)
+#define RCC_MC_APB4ENCLRR_DSIEN			BIT(4)
+#define RCC_MC_APB4ENCLRR_DDRPERFMEN		BIT(8)
+#define RCC_MC_APB4ENCLRR_USBPHYEN		BIT(16)
+#define RCC_MC_APB4ENCLRR_STGENROEN		BIT(20)
+
+/* RCC_MC_APB5ENSETR register fields */
+#define RCC_MC_APB5ENSETR_SPI6EN		BIT(0)
+#define RCC_MC_APB5ENSETR_I2C4EN		BIT(2)
+#define RCC_MC_APB5ENSETR_I2C6EN		BIT(3)
+#define RCC_MC_APB5ENSETR_USART1EN		BIT(4)
+#define RCC_MC_APB5ENSETR_RTCAPBEN		BIT(8)
+#define RCC_MC_APB5ENSETR_TZC1EN		BIT(11)
+#define RCC_MC_APB5ENSETR_TZC2EN		BIT(12)
+#define RCC_MC_APB5ENSETR_TZPCEN		BIT(13)
+#define RCC_MC_APB5ENSETR_BSECEN		BIT(16)
+#define RCC_MC_APB5ENSETR_STGENEN		BIT(20)
+
+/* RCC_MC_APB5ENCLRR register fields */
+#define RCC_MC_APB5ENCLRR_SPI6EN		BIT(0)
+#define RCC_MC_APB5ENCLRR_I2C4EN		BIT(2)
+#define RCC_MC_APB5ENCLRR_I2C6EN		BIT(3)
+#define RCC_MC_APB5ENCLRR_USART1EN		BIT(4)
+#define RCC_MC_APB5ENCLRR_RTCAPBEN		BIT(8)
+#define RCC_MC_APB5ENCLRR_TZC1EN		BIT(11)
+#define RCC_MC_APB5ENCLRR_TZC2EN		BIT(12)
+#define RCC_MC_APB5ENCLRR_TZPCEN		BIT(13)
+#define RCC_MC_APB5ENCLRR_BSECEN		BIT(16)
+#define RCC_MC_APB5ENCLRR_STGENEN		BIT(20)
+
+/* RCC_MC_AHB5ENSETR register fields */
+#define RCC_MC_AHB5ENSETR_GPIOZEN		BIT(0)
+#define RCC_MC_AHB5ENSETR_CRYP1EN		BIT(4)
+#define RCC_MC_AHB5ENSETR_HASH1EN		BIT(5)
+#define RCC_MC_AHB5ENSETR_RNG1EN		BIT(6)
+#define RCC_MC_AHB5ENSETR_BKPSRAMEN		BIT(8)
+
+/* RCC_MC_AHB5ENCLRR register fields */
+#define RCC_MC_AHB5ENCLRR_GPIOZEN		BIT(0)
+#define RCC_MC_AHB5ENCLRR_CRYP1EN		BIT(4)
+#define RCC_MC_AHB5ENCLRR_HASH1EN		BIT(5)
+#define RCC_MC_AHB5ENCLRR_RNG1EN		BIT(6)
+#define RCC_MC_AHB5ENCLRR_BKPSRAMEN		BIT(8)
+
+/* RCC_MC_AHB6ENSETR register fields */
+#define RCC_MC_AHB6ENSETR_MDMAEN		BIT(0)
+#define RCC_MC_AHB6ENSETR_GPUEN			BIT(5)
+#define RCC_MC_AHB6ENSETR_ETHCKEN		BIT(7)
+#define RCC_MC_AHB6ENSETR_ETHTXEN		BIT(8)
+#define RCC_MC_AHB6ENSETR_ETHRXEN		BIT(9)
+#define RCC_MC_AHB6ENSETR_ETHMACEN		BIT(10)
+#define RCC_MC_AHB6ENSETR_FMCEN			BIT(12)
+#define RCC_MC_AHB6ENSETR_QSPIEN		BIT(14)
+#define RCC_MC_AHB6ENSETR_SDMMC1EN		BIT(16)
+#define RCC_MC_AHB6ENSETR_SDMMC2EN		BIT(17)
+#define RCC_MC_AHB6ENSETR_CRC1EN		BIT(20)
+#define RCC_MC_AHB6ENSETR_USBHEN		BIT(24)
+
+/* RCC_MC_AHB6ENCLRR register fields */
+#define RCC_MC_AHB6ENCLRR_MDMAEN		BIT(0)
+#define RCC_MC_AHB6ENCLRR_GPUEN			BIT(5)
+#define RCC_MC_AHB6ENCLRR_ETHCKEN		BIT(7)
+#define RCC_MC_AHB6ENCLRR_ETHTXEN		BIT(8)
+#define RCC_MC_AHB6ENCLRR_ETHRXEN		BIT(9)
+#define RCC_MC_AHB6ENCLRR_ETHMACEN		BIT(10)
+#define RCC_MC_AHB6ENCLRR_FMCEN			BIT(12)
+#define RCC_MC_AHB6ENCLRR_QSPIEN		BIT(14)
+#define RCC_MC_AHB6ENCLRR_SDMMC1EN		BIT(16)
+#define RCC_MC_AHB6ENCLRR_SDMMC2EN		BIT(17)
+#define RCC_MC_AHB6ENCLRR_CRC1EN		BIT(20)
+#define RCC_MC_AHB6ENCLRR_USBHEN		BIT(24)
+
+/* RCC_MP_APB4LPENSETR register fields */
+#define RCC_MP_APB4LPENSETR_LTDCLPEN		BIT(0)
+#define RCC_MP_APB4LPENSETR_DSILPEN		BIT(4)
+#define RCC_MP_APB4LPENSETR_DDRPERFMLPEN	BIT(8)
+#define RCC_MP_APB4LPENSETR_IWDG2APBLPEN	BIT(15)
+#define RCC_MP_APB4LPENSETR_USBPHYLPEN		BIT(16)
+#define RCC_MP_APB4LPENSETR_STGENROLPEN		BIT(20)
+#define RCC_MP_APB4LPENSETR_STGENROSTPEN	BIT(21)
+
+/* RCC_MP_APB4LPENCLRR register fields */
+#define RCC_MP_APB4LPENCLRR_LTDCLPEN		BIT(0)
+#define RCC_MP_APB4LPENCLRR_DSILPEN		BIT(4)
+#define RCC_MP_APB4LPENCLRR_DDRPERFMLPEN	BIT(8)
+#define RCC_MP_APB4LPENCLRR_IWDG2APBLPEN	BIT(15)
+#define RCC_MP_APB4LPENCLRR_USBPHYLPEN		BIT(16)
+#define RCC_MP_APB4LPENCLRR_STGENROLPEN		BIT(20)
+#define RCC_MP_APB4LPENCLRR_STGENROSTPEN	BIT(21)
+
+/* RCC_MP_APB5LPENSETR register fields */
+#define RCC_MP_APB5LPENSETR_SPI6LPEN		BIT(0)
+#define RCC_MP_APB5LPENSETR_I2C4LPEN		BIT(2)
+#define RCC_MP_APB5LPENSETR_I2C6LPEN		BIT(3)
+#define RCC_MP_APB5LPENSETR_USART1LPEN		BIT(4)
+#define RCC_MP_APB5LPENSETR_RTCAPBLPEN		BIT(8)
+#define RCC_MP_APB5LPENSETR_TZC1LPEN		BIT(11)
+#define RCC_MP_APB5LPENSETR_TZC2LPEN		BIT(12)
+#define RCC_MP_APB5LPENSETR_TZPCLPEN		BIT(13)
+#define RCC_MP_APB5LPENSETR_IWDG1APBLPEN	BIT(15)
+#define RCC_MP_APB5LPENSETR_BSECLPEN		BIT(16)
+#define RCC_MP_APB5LPENSETR_STGENLPEN		BIT(20)
+#define RCC_MP_APB5LPENSETR_STGENSTPEN		BIT(21)
+
+/* RCC_MP_APB5LPENCLRR register fields */
+#define RCC_MP_APB5LPENCLRR_SPI6LPEN		BIT(0)
+#define RCC_MP_APB5LPENCLRR_I2C4LPEN		BIT(2)
+#define RCC_MP_APB5LPENCLRR_I2C6LPEN		BIT(3)
+#define RCC_MP_APB5LPENCLRR_USART1LPEN		BIT(4)
+#define RCC_MP_APB5LPENCLRR_RTCAPBLPEN		BIT(8)
+#define RCC_MP_APB5LPENCLRR_TZC1LPEN		BIT(11)
+#define RCC_MP_APB5LPENCLRR_TZC2LPEN		BIT(12)
+#define RCC_MP_APB5LPENCLRR_TZPCLPEN		BIT(13)
+#define RCC_MP_APB5LPENCLRR_IWDG1APBLPEN	BIT(15)
+#define RCC_MP_APB5LPENCLRR_BSECLPEN		BIT(16)
+#define RCC_MP_APB5LPENCLRR_STGENLPEN		BIT(20)
+#define RCC_MP_APB5LPENCLRR_STGENSTPEN		BIT(21)
+
+/* RCC_MP_AHB5LPENSETR register fields */
+#define RCC_MP_AHB5LPENSETR_GPIOZLPEN		BIT(0)
+#define RCC_MP_AHB5LPENSETR_CRYP1LPEN		BIT(4)
+#define RCC_MP_AHB5LPENSETR_HASH1LPEN		BIT(5)
+#define RCC_MP_AHB5LPENSETR_RNG1LPEN		BIT(6)
+#define RCC_MP_AHB5LPENSETR_BKPSRAMLPEN		BIT(8)
+
+/* RCC_MP_AHB5LPENCLRR register fields */
+#define RCC_MP_AHB5LPENCLRR_GPIOZLPEN		BIT(0)
+#define RCC_MP_AHB5LPENCLRR_CRYP1LPEN		BIT(4)
+#define RCC_MP_AHB5LPENCLRR_HASH1LPEN		BIT(5)
+#define RCC_MP_AHB5LPENCLRR_RNG1LPEN		BIT(6)
+#define RCC_MP_AHB5LPENCLRR_BKPSRAMLPEN		BIT(8)
+
+/* RCC_MP_AHB6LPENSETR register fields */
+#define RCC_MP_AHB6LPENSETR_MDMALPEN		BIT(0)
+#define RCC_MP_AHB6LPENSETR_GPULPEN		BIT(5)
+#define RCC_MP_AHB6LPENSETR_ETHCKLPEN		BIT(7)
+#define RCC_MP_AHB6LPENSETR_ETHTXLPEN		BIT(8)
+#define RCC_MP_AHB6LPENSETR_ETHRXLPEN		BIT(9)
+#define RCC_MP_AHB6LPENSETR_ETHMACLPEN		BIT(10)
+#define RCC_MP_AHB6LPENSETR_ETHSTPEN		BIT(11)
+#define RCC_MP_AHB6LPENSETR_FMCLPEN		BIT(12)
+#define RCC_MP_AHB6LPENSETR_QSPILPEN		BIT(14)
+#define RCC_MP_AHB6LPENSETR_SDMMC1LPEN		BIT(16)
+#define RCC_MP_AHB6LPENSETR_SDMMC2LPEN		BIT(17)
+#define RCC_MP_AHB6LPENSETR_CRC1LPEN		BIT(20)
+#define RCC_MP_AHB6LPENSETR_USBHLPEN		BIT(24)
+
+/* RCC_MP_AHB6LPENCLRR register fields */
+#define RCC_MP_AHB6LPENCLRR_MDMALPEN		BIT(0)
+#define RCC_MP_AHB6LPENCLRR_GPULPEN		BIT(5)
+#define RCC_MP_AHB6LPENCLRR_ETHCKLPEN		BIT(7)
+#define RCC_MP_AHB6LPENCLRR_ETHTXLPEN		BIT(8)
+#define RCC_MP_AHB6LPENCLRR_ETHRXLPEN		BIT(9)
+#define RCC_MP_AHB6LPENCLRR_ETHMACLPEN		BIT(10)
+#define RCC_MP_AHB6LPENCLRR_ETHSTPEN		BIT(11)
+#define RCC_MP_AHB6LPENCLRR_FMCLPEN		BIT(12)
+#define RCC_MP_AHB6LPENCLRR_QSPILPEN		BIT(14)
+#define RCC_MP_AHB6LPENCLRR_SDMMC1LPEN		BIT(16)
+#define RCC_MP_AHB6LPENCLRR_SDMMC2LPEN		BIT(17)
+#define RCC_MP_AHB6LPENCLRR_CRC1LPEN		BIT(20)
+#define RCC_MP_AHB6LPENCLRR_USBHLPEN		BIT(24)
+
+/* RCC_MP_TZAHB6LPENSETR register fields */
+#define RCC_MP_TZAHB6LPENSETR_MDMALPEN		BIT(0)
+
+/* RCC_MP_TZAHB6LPENCLRR register fields */
+#define RCC_MP_TZAHB6LPENCLRR_MDMALPEN		BIT(0)
+
+/* RCC_MC_APB4LPENSETR register fields */
+#define RCC_MC_APB4LPENSETR_LTDCLPEN		BIT(0)
+#define RCC_MC_APB4LPENSETR_DSILPEN		BIT(4)
+#define RCC_MC_APB4LPENSETR_DDRPERFMLPEN	BIT(8)
+#define RCC_MC_APB4LPENSETR_USBPHYLPEN		BIT(16)
+#define RCC_MC_APB4LPENSETR_STGENROLPEN		BIT(20)
+#define RCC_MC_APB4LPENSETR_STGENROSTPEN	BIT(21)
+
+/* RCC_MC_APB4LPENCLRR register fields */
+#define RCC_MC_APB4LPENCLRR_LTDCLPEN		BIT(0)
+#define RCC_MC_APB4LPENCLRR_DSILPEN		BIT(4)
+#define RCC_MC_APB4LPENCLRR_DDRPERFMLPEN	BIT(8)
+#define RCC_MC_APB4LPENCLRR_USBPHYLPEN		BIT(16)
+#define RCC_MC_APB4LPENCLRR_STGENROLPEN		BIT(20)
+#define RCC_MC_APB4LPENCLRR_STGENROSTPEN	BIT(21)
+
+/* RCC_MC_APB5LPENSETR register fields */
+#define RCC_MC_APB5LPENSETR_SPI6LPEN		BIT(0)
+#define RCC_MC_APB5LPENSETR_I2C4LPEN		BIT(2)
+#define RCC_MC_APB5LPENSETR_I2C6LPEN		BIT(3)
+#define RCC_MC_APB5LPENSETR_USART1LPEN		BIT(4)
+#define RCC_MC_APB5LPENSETR_RTCAPBLPEN		BIT(8)
+#define RCC_MC_APB5LPENSETR_TZC1LPEN		BIT(11)
+#define RCC_MC_APB5LPENSETR_TZC2LPEN		BIT(12)
+#define RCC_MC_APB5LPENSETR_TZPCLPEN		BIT(13)
+#define RCC_MC_APB5LPENSETR_BSECLPEN		BIT(16)
+#define RCC_MC_APB5LPENSETR_STGENLPEN		BIT(20)
+#define RCC_MC_APB5LPENSETR_STGENSTPEN		BIT(21)
+
+/* RCC_MC_APB5LPENCLRR register fields */
+#define RCC_MC_APB5LPENCLRR_SPI6LPEN		BIT(0)
+#define RCC_MC_APB5LPENCLRR_I2C4LPEN		BIT(2)
+#define RCC_MC_APB5LPENCLRR_I2C6LPEN		BIT(3)
+#define RCC_MC_APB5LPENCLRR_USART1LPEN		BIT(4)
+#define RCC_MC_APB5LPENCLRR_RTCAPBLPEN		BIT(8)
+#define RCC_MC_APB5LPENCLRR_TZC1LPEN		BIT(11)
+#define RCC_MC_APB5LPENCLRR_TZC2LPEN		BIT(12)
+#define RCC_MC_APB5LPENCLRR_TZPCLPEN		BIT(13)
+#define RCC_MC_APB5LPENCLRR_BSECLPEN		BIT(16)
+#define RCC_MC_APB5LPENCLRR_STGENLPEN		BIT(20)
+#define RCC_MC_APB5LPENCLRR_STGENSTPEN		BIT(21)
+
+/* RCC_MC_AHB5LPENSETR register fields */
+#define RCC_MC_AHB5LPENSETR_GPIOZLPEN		BIT(0)
+#define RCC_MC_AHB5LPENSETR_CRYP1LPEN		BIT(4)
+#define RCC_MC_AHB5LPENSETR_HASH1LPEN		BIT(5)
+#define RCC_MC_AHB5LPENSETR_RNG1LPEN		BIT(6)
+#define RCC_MC_AHB5LPENSETR_BKPSRAMLPEN		BIT(8)
+
+/* RCC_MC_AHB5LPENCLRR register fields */
+#define RCC_MC_AHB5LPENCLRR_GPIOZLPEN		BIT(0)
+#define RCC_MC_AHB5LPENCLRR_CRYP1LPEN		BIT(4)
+#define RCC_MC_AHB5LPENCLRR_HASH1LPEN		BIT(5)
+#define RCC_MC_AHB5LPENCLRR_RNG1LPEN		BIT(6)
+#define RCC_MC_AHB5LPENCLRR_BKPSRAMLPEN		BIT(8)
+
+/* RCC_MC_AHB6LPENSETR register fields */
+#define RCC_MC_AHB6LPENSETR_MDMALPEN		BIT(0)
+#define RCC_MC_AHB6LPENSETR_GPULPEN		BIT(5)
+#define RCC_MC_AHB6LPENSETR_ETHCKLPEN		BIT(7)
+#define RCC_MC_AHB6LPENSETR_ETHTXLPEN		BIT(8)
+#define RCC_MC_AHB6LPENSETR_ETHRXLPEN		BIT(9)
+#define RCC_MC_AHB6LPENSETR_ETHMACLPEN		BIT(10)
+#define RCC_MC_AHB6LPENSETR_ETHSTPEN		BIT(11)
+#define RCC_MC_AHB6LPENSETR_FMCLPEN		BIT(12)
+#define RCC_MC_AHB6LPENSETR_QSPILPEN		BIT(14)
+#define RCC_MC_AHB6LPENSETR_SDMMC1LPEN		BIT(16)
+#define RCC_MC_AHB6LPENSETR_SDMMC2LPEN		BIT(17)
+#define RCC_MC_AHB6LPENSETR_CRC1LPEN		BIT(20)
+#define RCC_MC_AHB6LPENSETR_USBHLPEN		BIT(24)
+
+/* RCC_MC_AHB6LPENCLRR register fields */
+#define RCC_MC_AHB6LPENCLRR_MDMALPEN		BIT(0)
+#define RCC_MC_AHB6LPENCLRR_GPULPEN		BIT(5)
+#define RCC_MC_AHB6LPENCLRR_ETHCKLPEN		BIT(7)
+#define RCC_MC_AHB6LPENCLRR_ETHTXLPEN		BIT(8)
+#define RCC_MC_AHB6LPENCLRR_ETHRXLPEN		BIT(9)
+#define RCC_MC_AHB6LPENCLRR_ETHMACLPEN		BIT(10)
+#define RCC_MC_AHB6LPENCLRR_ETHSTPEN		BIT(11)
+#define RCC_MC_AHB6LPENCLRR_FMCLPEN		BIT(12)
+#define RCC_MC_AHB6LPENCLRR_QSPILPEN		BIT(14)
+#define RCC_MC_AHB6LPENCLRR_SDMMC1LPEN		BIT(16)
+#define RCC_MC_AHB6LPENCLRR_SDMMC2LPEN		BIT(17)
+#define RCC_MC_AHB6LPENCLRR_CRC1LPEN		BIT(20)
+#define RCC_MC_AHB6LPENCLRR_USBHLPEN		BIT(24)
+
+/* RCC_BR_RSTSCLRR register fields */
+#define RCC_BR_RSTSCLRR_PORRSTF			BIT(0)
+#define RCC_BR_RSTSCLRR_BORRSTF			BIT(1)
+#define RCC_BR_RSTSCLRR_PADRSTF			BIT(2)
+#define RCC_BR_RSTSCLRR_HCSSRSTF		BIT(3)
+#define RCC_BR_RSTSCLRR_VCORERSTF		BIT(4)
+#define RCC_BR_RSTSCLRR_MPSYSRSTF		BIT(6)
+#define RCC_BR_RSTSCLRR_MCSYSRSTF		BIT(7)
+#define RCC_BR_RSTSCLRR_IWDG1RSTF		BIT(8)
+#define RCC_BR_RSTSCLRR_IWDG2RSTF		BIT(9)
+#define RCC_BR_RSTSCLRR_MPUP0RSTF		BIT(13)
+#define RCC_BR_RSTSCLRR_MPUP1RSTF		BIT(14)
+
+/* RCC_MP_GRSTCSETR register fields */
+#define RCC_MP_GRSTCSETR_MPSYSRST		BIT(0)
+#define RCC_MP_GRSTCSETR_MCURST			BIT(1)
+#define RCC_MP_GRSTCSETR_MPUP0RST		BIT(4)
+#define RCC_MP_GRSTCSETR_MPUP1RST		BIT(5)
+
+/* RCC_MP_RSTSCLRR register fields */
+#define RCC_MP_RSTSCLRR_PORRSTF			BIT(0)
+#define RCC_MP_RSTSCLRR_BORRSTF			BIT(1)
+#define RCC_MP_RSTSCLRR_PADRSTF			BIT(2)
+#define RCC_MP_RSTSCLRR_HCSSRSTF		BIT(3)
+#define RCC_MP_RSTSCLRR_VCORERSTF		BIT(4)
+#define RCC_MP_RSTSCLRR_MPSYSRSTF		BIT(6)
+#define RCC_MP_RSTSCLRR_MCSYSRSTF		BIT(7)
+#define RCC_MP_RSTSCLRR_IWDG1RSTF		BIT(8)
+#define RCC_MP_RSTSCLRR_IWDG2RSTF		BIT(9)
+#define RCC_MP_RSTSCLRR_STDBYRSTF		BIT(11)
+#define RCC_MP_RSTSCLRR_CSTDBYRSTF		BIT(12)
+#define RCC_MP_RSTSCLRR_MPUP0RSTF		BIT(13)
+#define RCC_MP_RSTSCLRR_MPUP1RSTF		BIT(14)
+#define RCC_MP_RSTSCLRR_SPARE			BIT(15)
+
+/* RCC_MP_IWDGFZSETR register fields */
+#define RCC_MP_IWDGFZSETR_FZ_IWDG1		BIT(0)
+#define RCC_MP_IWDGFZSETR_FZ_IWDG2		BIT(1)
+
+/* RCC_MP_IWDGFZCLRR register fields */
+#define RCC_MP_IWDGFZCLRR_FZ_IWDG1		BIT(0)
+#define RCC_MP_IWDGFZCLRR_FZ_IWDG2		BIT(1)
+
+/* RCC_MP_CIER register fields */
+#define RCC_MP_CIER_LSIRDYIE			BIT(0)
+#define RCC_MP_CIER_LSERDYIE			BIT(1)
+#define RCC_MP_CIER_HSIRDYIE			BIT(2)
+#define RCC_MP_CIER_HSERDYIE			BIT(3)
+#define RCC_MP_CIER_CSIRDYIE			BIT(4)
+#define RCC_MP_CIER_PLL1DYIE			BIT(8)
+#define RCC_MP_CIER_PLL2DYIE			BIT(9)
+#define RCC_MP_CIER_PLL3DYIE			BIT(10)
+#define RCC_MP_CIER_PLL4DYIE			BIT(11)
+#define RCC_MP_CIER_LSECSSIE			BIT(16)
+#define RCC_MP_CIER_WKUPIE			BIT(20)
+
+/* RCC_MP_CIFR register fields */
+#define RCC_MP_CIFR_MASK			U(0x110F1F)
+#define RCC_MP_CIFR_LSIRDYF			BIT(0)
+#define RCC_MP_CIFR_LSERDYF			BIT(1)
+#define RCC_MP_CIFR_HSIRDYF			BIT(2)
+#define RCC_MP_CIFR_HSERDYF			BIT(3)
+#define RCC_MP_CIFR_CSIRDYF			BIT(4)
+#define RCC_MP_CIFR_PLL1DYF			BIT(8)
+#define RCC_MP_CIFR_PLL2DYF			BIT(9)
+#define RCC_MP_CIFR_PLL3DYF			BIT(10)
+#define RCC_MP_CIFR_PLL4DYF			BIT(11)
+#define RCC_MP_CIFR_LSECSSF			BIT(16)
+#define RCC_MP_CIFR_WKUPF			BIT(20)
+
+/* RCC_PWRLPDLYCR register fields */
+#define RCC_PWRLPDLYCR_PWRLP_DLY_MASK		GENMASK(21, 0)
+#define RCC_PWRLPDLYCR_PWRLP_DLY_SHIFT		0
+#define RCC_PWRLPDLYCR_MCTMPSKP			BIT(24)
+
+/* RCC_MP_RSTSSETR register fields */
+#define RCC_MP_RSTSSETR_PORRSTF			BIT(0)
+#define RCC_MP_RSTSSETR_BORRSTF			BIT(1)
+#define RCC_MP_RSTSSETR_PADRSTF			BIT(2)
+#define RCC_MP_RSTSSETR_HCSSRSTF		BIT(3)
+#define RCC_MP_RSTSSETR_VCORERSTF		BIT(4)
+#define RCC_MP_RSTSSETR_MPSYSRSTF		BIT(6)
+#define RCC_MP_RSTSSETR_MCSYSRSTF		BIT(7)
+#define RCC_MP_RSTSSETR_IWDG1RSTF		BIT(8)
+#define RCC_MP_RSTSSETR_IWDG2RSTF		BIT(9)
+#define RCC_MP_RSTSSETR_STDBYRSTF		BIT(11)
+#define RCC_MP_RSTSSETR_CSTDBYRSTF		BIT(12)
+#define RCC_MP_RSTSSETR_MPUP0RSTF		BIT(13)
+#define RCC_MP_RSTSSETR_MPUP1RSTF		BIT(14)
+#define RCC_MP_RSTSSETR_SPARE			BIT(15)
+
+/* RCC_MCO1CFGR register fields */
+#define RCC_MCO1CFGR_MCO1SEL_MASK		GENMASK(2, 0)
+#define RCC_MCO1CFGR_MCO1SEL_SHIFT		0
+#define RCC_MCO1CFGR_MCO1DIV_MASK		GENMASK(7, 4)
+#define RCC_MCO1CFGR_MCO1DIV_SHIFT		4
+#define RCC_MCO1CFGR_MCO1ON			BIT(12)
+
+/* RCC_MCO2CFGR register fields */
+#define RCC_MCO2CFGR_MCO2SEL_MASK		GENMASK(2, 0)
+#define RCC_MCO2CFGR_MCO2SEL_SHIFT		0
+#define RCC_MCO2CFGR_MCO2DIV_MASK		GENMASK(7, 4)
+#define RCC_MCO2CFGR_MCO2DIV_SHIFT		4
+#define RCC_MCO2CFGR_MCO2ON			BIT(12)
+
+/* RCC_OCRDYR register fields */
+#define RCC_OCRDYR_HSIRDY			BIT(0)
+#define RCC_OCRDYR_HSIDIVRDY			BIT(2)
+#define RCC_OCRDYR_CSIRDY			BIT(4)
+#define RCC_OCRDYR_HSERDY			BIT(8)
+#define RCC_OCRDYR_MPUCKRDY			BIT(23)
+#define RCC_OCRDYR_AXICKRDY			BIT(24)
+#define RCC_OCRDYR_CKREST			BIT(25)
+
+/* RCC_DBGCFGR register fields */
+#define RCC_DBGCFGR_TRACEDIV_MASK		GENMASK(2, 0)
+#define RCC_DBGCFGR_TRACEDIV_SHIFT		0
+#define RCC_DBGCFGR_DBGCKEN			BIT(8)
+#define RCC_DBGCFGR_TRACECKEN			BIT(9)
+#define RCC_DBGCFGR_DBGRST			BIT(12)
+
+/* RCC_RCK3SELR register fields */
+#define RCC_RCK3SELR_PLL3SRC_MASK		GENMASK(1, 0)
+#define RCC_RCK3SELR_PLL3SRC_SHIFT		0
+#define RCC_RCK3SELR_PLL3SRCRDY			BIT(31)
+
+/* RCC_RCK4SELR register fields */
+#define RCC_RCK4SELR_PLL4SRC_MASK		GENMASK(1, 0)
+#define RCC_RCK4SELR_PLL4SRC_SHIFT		0
+#define RCC_RCK4SELR_PLL4SRCRDY			BIT(31)
+
+/* RCC_TIMG1PRER register fields */
+#define RCC_TIMG1PRER_TIMG1PRE			BIT(0)
+#define RCC_TIMG1PRER_TIMG1PRERDY		BIT(31)
+
+/* RCC_TIMG2PRER register fields */
+#define RCC_TIMG2PRER_TIMG2PRE			BIT(0)
+#define RCC_TIMG2PRER_TIMG2PRERDY		BIT(31)
+
+/* RCC_MCUDIVR register fields */
+#define RCC_MCUDIVR_MCUDIV_MASK			GENMASK(3, 0)
+#define RCC_MCUDIVR_MCUDIV_SHIFT		0
+#define RCC_MCUDIVR_MCUDIVRDY			BIT(31)
+
+/* RCC_APB1DIVR register fields */
+#define RCC_APB1DIVR_APB1DIV_MASK		GENMASK(2, 0)
+#define RCC_APB1DIVR_APB1DIV_SHIFT		0
+#define RCC_APB1DIVR_APB1DIVRDY			BIT(31)
+
+/* RCC_APB2DIVR register fields */
+#define RCC_APB2DIVR_APB2DIV_MASK		GENMASK(2, 0)
+#define RCC_APB2DIVR_APB2DIV_SHIFT		0
+#define RCC_APB2DIVR_APB2DIVRDY			BIT(31)
+
+/* RCC_APB3DIVR register fields */
+#define RCC_APB3DIVR_APB3DIV_MASK		GENMASK(2, 0)
+#define RCC_APB3DIVR_APB3DIV_SHIFT		0
+#define RCC_APB3DIVR_APB3DIVRDY			BIT(31)
+
+/* RCC_PLL3CR register fields */
+#define RCC_PLL3CR_PLLON			BIT(0)
+#define RCC_PLL3CR_PLL3RDY			BIT(1)
+#define RCC_PLL3CR_SSCG_CTRL			BIT(2)
+#define RCC_PLL3CR_DIVPEN			BIT(4)
+#define RCC_PLL3CR_DIVQEN			BIT(5)
+#define RCC_PLL3CR_DIVREN			BIT(6)
+
+/* RCC_PLL3CFGR1 register fields */
+#define RCC_PLL3CFGR1_DIVN_MASK			GENMASK(8, 0)
+#define RCC_PLL3CFGR1_DIVN_SHIFT		0
+#define RCC_PLL3CFGR1_DIVM3_MASK		GENMASK(21, 16)
+#define RCC_PLL3CFGR1_DIVM3_SHIFT		16
+#define RCC_PLL3CFGR1_IFRGE_MASK		GENMASK(25, 24)
+#define RCC_PLL3CFGR1_IFRGE_SHIFT		24
+
+/* RCC_PLL3CFGR2 register fields */
+#define RCC_PLL3CFGR2_DIVP_MASK			GENMASK(6, 0)
+#define RCC_PLL3CFGR2_DIVP_SHIFT		0
+#define RCC_PLL3CFGR2_DIVQ_MASK			GENMASK(14, 8)
+#define RCC_PLL3CFGR2_DIVQ_SHIFT		8
+#define RCC_PLL3CFGR2_DIVR_MASK			GENMASK(22, 16)
+#define RCC_PLL3CFGR2_DIVR_SHIFT		16
+
+/* RCC_PLL3FRACR register fields */
+#define RCC_PLL3FRACR_FRACV_MASK		GENMASK(15, 3)
+#define RCC_PLL3FRACR_FRACV_SHIFT		3
+#define RCC_PLL3FRACR_FRACLE			BIT(16)
+
+/* RCC_PLL3CSGR register fields */
+#define RCC_PLL3CSGR_MOD_PER_MASK		GENMASK(12, 0)
+#define RCC_PLL3CSGR_MOD_PER_SHIFT		0
+#define RCC_PLL3CSGR_TPDFN_DIS			BIT(13)
+#define RCC_PLL3CSGR_RPDFN_DIS			BIT(14)
+#define RCC_PLL3CSGR_SSCG_MODE			BIT(15)
+#define RCC_PLL3CSGR_INC_STEP_MASK		GENMASK(30, 16)
+#define RCC_PLL3CSGR_INC_STEP_SHIFT		16
+
+/* RCC_PLL4CR register fields */
+#define RCC_PLL4CR_PLLON			BIT(0)
+#define RCC_PLL4CR_PLL4RDY			BIT(1)
+#define RCC_PLL4CR_SSCG_CTRL			BIT(2)
+#define RCC_PLL4CR_DIVPEN			BIT(4)
+#define RCC_PLL4CR_DIVQEN			BIT(5)
+#define RCC_PLL4CR_DIVREN			BIT(6)
+
+/* RCC_PLL4CFGR1 register fields */
+#define RCC_PLL4CFGR1_DIVN_MASK			GENMASK(8, 0)
+#define RCC_PLL4CFGR1_DIVN_SHIFT		0
+#define RCC_PLL4CFGR1_DIVM4_MASK		GENMASK(21, 16)
+#define RCC_PLL4CFGR1_DIVM4_SHIFT		16
+#define RCC_PLL4CFGR1_IFRGE_MASK		GENMASK(25, 24)
+#define RCC_PLL4CFGR1_IFRGE_SHIFT		24
+
+/* RCC_PLL4CFGR2 register fields */
+#define RCC_PLL4CFGR2_DIVP_MASK			GENMASK(6, 0)
+#define RCC_PLL4CFGR2_DIVP_SHIFT		0
+#define RCC_PLL4CFGR2_DIVQ_MASK			GENMASK(14, 8)
+#define RCC_PLL4CFGR2_DIVQ_SHIFT		8
+#define RCC_PLL4CFGR2_DIVR_MASK			GENMASK(22, 16)
+#define RCC_PLL4CFGR2_DIVR_SHIFT		16
+
+/* RCC_PLL4FRACR register fields */
+#define RCC_PLL4FRACR_FRACV_MASK		GENMASK(15, 3)
+#define RCC_PLL4FRACR_FRACV_SHIFT		3
+#define RCC_PLL4FRACR_FRACLE			BIT(16)
+
+/* RCC_PLL4CSGR register fields */
+#define RCC_PLL4CSGR_MOD_PER_MASK		GENMASK(12, 0)
+#define RCC_PLL4CSGR_MOD_PER_SHIFT		0
+#define RCC_PLL4CSGR_TPDFN_DIS			BIT(13)
+#define RCC_PLL4CSGR_RPDFN_DIS			BIT(14)
+#define RCC_PLL4CSGR_SSCG_MODE			BIT(15)
+#define RCC_PLL4CSGR_INC_STEP_MASK		GENMASK(30, 16)
+#define RCC_PLL4CSGR_INC_STEP_SHIFT		16
+
 /* RCC_I2C12CKSELR register fields */
 #define RCC_I2C12CKSELR_I2C12SRC_MASK		GENMASK(2, 0)
 #define RCC_I2C12CKSELR_I2C12SRC_SHIFT		0
@@ -520,11 +1170,40 @@
 #define RCC_I2C35CKSELR_I2C35SRC_MASK		GENMASK(2, 0)
 #define RCC_I2C35CKSELR_I2C35SRC_SHIFT		0
 
+/* RCC_SAI1CKSELR register fields */
+#define RCC_SAI1CKSELR_SAI1SRC_MASK		GENMASK(2, 0)
+#define RCC_SAI1CKSELR_SAI1SRC_SHIFT		0
+
+/* RCC_SAI2CKSELR register fields */
+#define RCC_SAI2CKSELR_SAI2SRC_MASK		GENMASK(2, 0)
+#define RCC_SAI2CKSELR_SAI2SRC_SHIFT		0
+
+/* RCC_SAI3CKSELR register fields */
+#define RCC_SAI3CKSELR_SAI3SRC_MASK		GENMASK(2, 0)
+#define RCC_SAI3CKSELR_SAI3SRC_SHIFT		0
+
+/* RCC_SAI4CKSELR register fields */
+#define RCC_SAI4CKSELR_SAI4SRC_MASK		GENMASK(2, 0)
+#define RCC_SAI4CKSELR_SAI4SRC_SHIFT		0
+
+/* RCC_SPI2S1CKSELR register fields */
+#define RCC_SPI2S1CKSELR_SPI1SRC_MASK		GENMASK(2, 0)
+#define RCC_SPI2S1CKSELR_SPI1SRC_SHIFT		0
+
+/* RCC_SPI2S23CKSELR register fields */
+#define RCC_SPI2S23CKSELR_SPI23SRC_MASK		GENMASK(2, 0)
+#define RCC_SPI2S23CKSELR_SPI23SRC_SHIFT	0
+
+/* RCC_SPI45CKSELR register fields */
+#define RCC_SPI45CKSELR_SPI45SRC_MASK		GENMASK(2, 0)
+#define RCC_SPI45CKSELR_SPI45SRC_SHIFT		0
+
 /* RCC_UART6CKSELR register fields */
 #define RCC_UART6CKSELR_UART6SRC_MASK		GENMASK(2, 0)
 #define RCC_UART6CKSELR_UART6SRC_SHIFT		0
 
 /* RCC_UART24CKSELR register fields */
+#define RCC_UART24CKSELR_HSI			0x00000002
 #define RCC_UART24CKSELR_UART24SRC_MASK		GENMASK(2, 0)
 #define RCC_UART24CKSELR_UART24SRC_SHIFT	0
 
@@ -547,6 +1226,8 @@
 /* RCC_ETHCKSELR register fields */
 #define RCC_ETHCKSELR_ETHSRC_MASK		GENMASK(1, 0)
 #define RCC_ETHCKSELR_ETHSRC_SHIFT		0
+#define RCC_ETHCKSELR_ETHPTPDIV_MASK		GENMASK(7, 4)
+#define RCC_ETHCKSELR_ETHPTPDIV_SHIFT		4
 
 /* RCC_QSPICKSELR register fields */
 #define RCC_QSPICKSELR_QSPISRC_MASK		GENMASK(1, 0)
@@ -556,10 +1237,1092 @@
 #define RCC_FMCCKSELR_FMCSRC_MASK		GENMASK(1, 0)
 #define RCC_FMCCKSELR_FMCSRC_SHIFT		0
 
+/* RCC_FDCANCKSELR register fields */
+#define RCC_FDCANCKSELR_FDCANSRC_MASK		GENMASK(1, 0)
+#define RCC_FDCANCKSELR_FDCANSRC_SHIFT		0
+
+/* RCC_SPDIFCKSELR register fields */
+#define RCC_SPDIFCKSELR_SPDIFSRC_MASK		GENMASK(1, 0)
+#define RCC_SPDIFCKSELR_SPDIFSRC_SHIFT		0
+
+/* RCC_CECCKSELR register fields */
+#define RCC_CECCKSELR_CECSRC_MASK		GENMASK(1, 0)
+#define RCC_CECCKSELR_CECSRC_SHIFT		0
+
 /* RCC_USBCKSELR register fields */
 #define RCC_USBCKSELR_USBPHYSRC_MASK		GENMASK(1, 0)
 #define RCC_USBCKSELR_USBPHYSRC_SHIFT		0
+#define RCC_USBCKSELR_USBOSRC			BIT(4)
 #define RCC_USBCKSELR_USBOSRC_MASK		BIT(4)
 #define RCC_USBCKSELR_USBOSRC_SHIFT		4
 
+/* RCC_RNG2CKSELR register fields */
+#define RCC_RNG2CKSELR_RNG2SRC_MASK		GENMASK(1, 0)
+#define RCC_RNG2CKSELR_RNG2SRC_SHIFT		0
+
+/* RCC_DSICKSELR register fields */
+#define RCC_DSICKSELR_DSISRC			BIT(0)
+
+/* RCC_ADCCKSELR register fields */
+#define RCC_ADCCKSELR_ADCSRC_MASK		GENMASK(1, 0)
+#define RCC_ADCCKSELR_ADCSRC_SHIFT		0
+
+/* RCC_LPTIM45CKSELR register fields */
+#define RCC_LPTIM45CKSELR_LPTIM45SRC_MASK	GENMASK(2, 0)
+#define RCC_LPTIM45CKSELR_LPTIM45SRC_SHIFT	0
+
+/* RCC_LPTIM23CKSELR register fields */
+#define RCC_LPTIM23CKSELR_LPTIM23SRC_MASK	GENMASK(2, 0)
+#define RCC_LPTIM23CKSELR_LPTIM23SRC_SHIFT	0
+
+/* RCC_LPTIM1CKSELR register fields */
+#define RCC_LPTIM1CKSELR_LPTIM1SRC_MASK		GENMASK(2, 0)
+#define RCC_LPTIM1CKSELR_LPTIM1SRC_SHIFT	0
+
+/* RCC_APB1RSTSETR register fields */
+#define RCC_APB1RSTSETR_TIM2RST			BIT(0)
+#define RCC_APB1RSTSETR_TIM3RST			BIT(1)
+#define RCC_APB1RSTSETR_TIM4RST			BIT(2)
+#define RCC_APB1RSTSETR_TIM5RST			BIT(3)
+#define RCC_APB1RSTSETR_TIM6RST			BIT(4)
+#define RCC_APB1RSTSETR_TIM7RST			BIT(5)
+#define RCC_APB1RSTSETR_TIM12RST		BIT(6)
+#define RCC_APB1RSTSETR_TIM13RST		BIT(7)
+#define RCC_APB1RSTSETR_TIM14RST		BIT(8)
+#define RCC_APB1RSTSETR_LPTIM1RST		BIT(9)
+#define RCC_APB1RSTSETR_SPI2RST			BIT(11)
+#define RCC_APB1RSTSETR_SPI3RST			BIT(12)
+#define RCC_APB1RSTSETR_USART2RST		BIT(14)
+#define RCC_APB1RSTSETR_USART3RST		BIT(15)
+#define RCC_APB1RSTSETR_UART4RST		BIT(16)
+#define RCC_APB1RSTSETR_UART5RST		BIT(17)
+#define RCC_APB1RSTSETR_UART7RST		BIT(18)
+#define RCC_APB1RSTSETR_UART8RST		BIT(19)
+#define RCC_APB1RSTSETR_I2C1RST			BIT(21)
+#define RCC_APB1RSTSETR_I2C2RST			BIT(22)
+#define RCC_APB1RSTSETR_I2C3RST			BIT(23)
+#define RCC_APB1RSTSETR_I2C5RST			BIT(24)
+#define RCC_APB1RSTSETR_SPDIFRST		BIT(26)
+#define RCC_APB1RSTSETR_CECRST			BIT(27)
+#define RCC_APB1RSTSETR_DAC12RST		BIT(29)
+#define RCC_APB1RSTSETR_MDIOSRST		BIT(31)
+
+/* RCC_APB1RSTCLRR register fields */
+#define RCC_APB1RSTCLRR_TIM2RST			BIT(0)
+#define RCC_APB1RSTCLRR_TIM3RST			BIT(1)
+#define RCC_APB1RSTCLRR_TIM4RST			BIT(2)
+#define RCC_APB1RSTCLRR_TIM5RST			BIT(3)
+#define RCC_APB1RSTCLRR_TIM6RST			BIT(4)
+#define RCC_APB1RSTCLRR_TIM7RST			BIT(5)
+#define RCC_APB1RSTCLRR_TIM12RST		BIT(6)
+#define RCC_APB1RSTCLRR_TIM13RST		BIT(7)
+#define RCC_APB1RSTCLRR_TIM14RST		BIT(8)
+#define RCC_APB1RSTCLRR_LPTIM1RST		BIT(9)
+#define RCC_APB1RSTCLRR_SPI2RST			BIT(11)
+#define RCC_APB1RSTCLRR_SPI3RST			BIT(12)
+#define RCC_APB1RSTCLRR_USART2RST		BIT(14)
+#define RCC_APB1RSTCLRR_USART3RST		BIT(15)
+#define RCC_APB1RSTCLRR_UART4RST		BIT(16)
+#define RCC_APB1RSTCLRR_UART5RST		BIT(17)
+#define RCC_APB1RSTCLRR_UART7RST		BIT(18)
+#define RCC_APB1RSTCLRR_UART8RST		BIT(19)
+#define RCC_APB1RSTCLRR_I2C1RST			BIT(21)
+#define RCC_APB1RSTCLRR_I2C2RST			BIT(22)
+#define RCC_APB1RSTCLRR_I2C3RST			BIT(23)
+#define RCC_APB1RSTCLRR_I2C5RST			BIT(24)
+#define RCC_APB1RSTCLRR_SPDIFRST		BIT(26)
+#define RCC_APB1RSTCLRR_CECRST			BIT(27)
+#define RCC_APB1RSTCLRR_DAC12RST		BIT(29)
+#define RCC_APB1RSTCLRR_MDIOSRST		BIT(31)
+
+/* RCC_APB2RSTSETR register fields */
+#define RCC_APB2RSTSETR_TIM1RST			BIT(0)
+#define RCC_APB2RSTSETR_TIM8RST			BIT(1)
+#define RCC_APB2RSTSETR_TIM15RST		BIT(2)
+#define RCC_APB2RSTSETR_TIM16RST		BIT(3)
+#define RCC_APB2RSTSETR_TIM17RST		BIT(4)
+#define RCC_APB2RSTSETR_SPI1RST			BIT(8)
+#define RCC_APB2RSTSETR_SPI4RST			BIT(9)
+#define RCC_APB2RSTSETR_SPI5RST			BIT(10)
+#define RCC_APB2RSTSETR_USART6RST		BIT(13)
+#define RCC_APB2RSTSETR_SAI1RST			BIT(16)
+#define RCC_APB2RSTSETR_SAI2RST			BIT(17)
+#define RCC_APB2RSTSETR_SAI3RST			BIT(18)
+#define RCC_APB2RSTSETR_DFSDMRST		BIT(20)
+#define RCC_APB2RSTSETR_FDCANRST		BIT(24)
+
+/* RCC_APB2RSTCLRR register fields */
+#define RCC_APB2RSTCLRR_TIM1RST			BIT(0)
+#define RCC_APB2RSTCLRR_TIM8RST			BIT(1)
+#define RCC_APB2RSTCLRR_TIM15RST		BIT(2)
+#define RCC_APB2RSTCLRR_TIM16RST		BIT(3)
+#define RCC_APB2RSTCLRR_TIM17RST		BIT(4)
+#define RCC_APB2RSTCLRR_SPI1RST			BIT(8)
+#define RCC_APB2RSTCLRR_SPI4RST			BIT(9)
+#define RCC_APB2RSTCLRR_SPI5RST			BIT(10)
+#define RCC_APB2RSTCLRR_USART6RST		BIT(13)
+#define RCC_APB2RSTCLRR_SAI1RST			BIT(16)
+#define RCC_APB2RSTCLRR_SAI2RST			BIT(17)
+#define RCC_APB2RSTCLRR_SAI3RST			BIT(18)
+#define RCC_APB2RSTCLRR_DFSDMRST		BIT(20)
+#define RCC_APB2RSTCLRR_FDCANRST		BIT(24)
+
+/* RCC_APB3RSTSETR register fields */
+#define RCC_APB3RSTSETR_LPTIM2RST		BIT(0)
+#define RCC_APB3RSTSETR_LPTIM3RST		BIT(1)
+#define RCC_APB3RSTSETR_LPTIM4RST		BIT(2)
+#define RCC_APB3RSTSETR_LPTIM5RST		BIT(3)
+#define RCC_APB3RSTSETR_SAI4RST			BIT(8)
+#define RCC_APB3RSTSETR_SYSCFGRST		BIT(11)
+#define RCC_APB3RSTSETR_VREFRST			BIT(13)
+#define RCC_APB3RSTSETR_TMPSENSRST		BIT(16)
+#define RCC_APB3RSTSETR_PMBCTRLRST		BIT(17)
+
+/* RCC_APB3RSTCLRR register fields */
+#define RCC_APB3RSTCLRR_LPTIM2RST		BIT(0)
+#define RCC_APB3RSTCLRR_LPTIM3RST		BIT(1)
+#define RCC_APB3RSTCLRR_LPTIM4RST		BIT(2)
+#define RCC_APB3RSTCLRR_LPTIM5RST		BIT(3)
+#define RCC_APB3RSTCLRR_SAI4RST			BIT(8)
+#define RCC_APB3RSTCLRR_SYSCFGRST		BIT(11)
+#define RCC_APB3RSTCLRR_VREFRST			BIT(13)
+#define RCC_APB3RSTCLRR_TMPSENSRST		BIT(16)
+#define RCC_APB3RSTCLRR_PMBCTRLRST		BIT(17)
+
+/* RCC_AHB2RSTSETR register fields */
+#define RCC_AHB2RSTSETR_DMA1RST			BIT(0)
+#define RCC_AHB2RSTSETR_DMA2RST			BIT(1)
+#define RCC_AHB2RSTSETR_DMAMUXRST		BIT(2)
+#define RCC_AHB2RSTSETR_ADC12RST		BIT(5)
+#define RCC_AHB2RSTSETR_USBORST			BIT(8)
+#define RCC_AHB2RSTSETR_SDMMC3RST		BIT(16)
+
+/* RCC_AHB2RSTCLRR register fields */
+#define RCC_AHB2RSTCLRR_DMA1RST			BIT(0)
+#define RCC_AHB2RSTCLRR_DMA2RST			BIT(1)
+#define RCC_AHB2RSTCLRR_DMAMUXRST		BIT(2)
+#define RCC_AHB2RSTCLRR_ADC12RST		BIT(5)
+#define RCC_AHB2RSTCLRR_USBORST			BIT(8)
+#define RCC_AHB2RSTCLRR_SDMMC3RST		BIT(16)
+
+/* RCC_AHB3RSTSETR register fields */
+#define RCC_AHB3RSTSETR_DCMIRST			BIT(0)
+#define RCC_AHB3RSTSETR_CRYP2RST		BIT(4)
+#define RCC_AHB3RSTSETR_HASH2RST		BIT(5)
+#define RCC_AHB3RSTSETR_RNG2RST			BIT(6)
+#define RCC_AHB3RSTSETR_CRC2RST			BIT(7)
+#define RCC_AHB3RSTSETR_HSEMRST			BIT(11)
+#define RCC_AHB3RSTSETR_IPCCRST			BIT(12)
+
+/* RCC_AHB3RSTCLRR register fields */
+#define RCC_AHB3RSTCLRR_DCMIRST			BIT(0)
+#define RCC_AHB3RSTCLRR_CRYP2RST		BIT(4)
+#define RCC_AHB3RSTCLRR_HASH2RST		BIT(5)
+#define RCC_AHB3RSTCLRR_RNG2RST			BIT(6)
+#define RCC_AHB3RSTCLRR_CRC2RST			BIT(7)
+#define RCC_AHB3RSTCLRR_HSEMRST			BIT(11)
+#define RCC_AHB3RSTCLRR_IPCCRST			BIT(12)
+
+/* RCC_AHB4RSTSETR register fields */
+#define RCC_AHB4RSTSETR_GPIOARST		BIT(0)
+#define RCC_AHB4RSTSETR_GPIOBRST		BIT(1)
+#define RCC_AHB4RSTSETR_GPIOCRST		BIT(2)
+#define RCC_AHB4RSTSETR_GPIODRST		BIT(3)
+#define RCC_AHB4RSTSETR_GPIOERST		BIT(4)
+#define RCC_AHB4RSTSETR_GPIOFRST		BIT(5)
+#define RCC_AHB4RSTSETR_GPIOGRST		BIT(6)
+#define RCC_AHB4RSTSETR_GPIOHRST		BIT(7)
+#define RCC_AHB4RSTSETR_GPIOIRST		BIT(8)
+#define RCC_AHB4RSTSETR_GPIOJRST		BIT(9)
+#define RCC_AHB4RSTSETR_GPIOKRST		BIT(10)
+
+/* RCC_AHB4RSTCLRR register fields */
+#define RCC_AHB4RSTCLRR_GPIOARST		BIT(0)
+#define RCC_AHB4RSTCLRR_GPIOBRST		BIT(1)
+#define RCC_AHB4RSTCLRR_GPIOCRST		BIT(2)
+#define RCC_AHB4RSTCLRR_GPIODRST		BIT(3)
+#define RCC_AHB4RSTCLRR_GPIOERST		BIT(4)
+#define RCC_AHB4RSTCLRR_GPIOFRST		BIT(5)
+#define RCC_AHB4RSTCLRR_GPIOGRST		BIT(6)
+#define RCC_AHB4RSTCLRR_GPIOHRST		BIT(7)
+#define RCC_AHB4RSTCLRR_GPIOIRST		BIT(8)
+#define RCC_AHB4RSTCLRR_GPIOJRST		BIT(9)
+#define RCC_AHB4RSTCLRR_GPIOKRST		BIT(10)
+
+/* RCC_MP_APB1ENSETR register fields */
+#define RCC_MP_APB1ENSETR_TIM2EN		BIT(0)
+#define RCC_MP_APB1ENSETR_TIM3EN		BIT(1)
+#define RCC_MP_APB1ENSETR_TIM4EN		BIT(2)
+#define RCC_MP_APB1ENSETR_TIM5EN		BIT(3)
+#define RCC_MP_APB1ENSETR_TIM6EN		BIT(4)
+#define RCC_MP_APB1ENSETR_TIM7EN		BIT(5)
+#define RCC_MP_APB1ENSETR_TIM12EN		BIT(6)
+#define RCC_MP_APB1ENSETR_TIM13EN		BIT(7)
+#define RCC_MP_APB1ENSETR_TIM14EN		BIT(8)
+#define RCC_MP_APB1ENSETR_LPTIM1EN		BIT(9)
+#define RCC_MP_APB1ENSETR_SPI2EN		BIT(11)
+#define RCC_MP_APB1ENSETR_SPI3EN		BIT(12)
+#define RCC_MP_APB1ENSETR_USART2EN		BIT(14)
+#define RCC_MP_APB1ENSETR_USART3EN		BIT(15)
+#define RCC_MP_APB1ENSETR_UART4EN		BIT(16)
+#define RCC_MP_APB1ENSETR_UART5EN		BIT(17)
+#define RCC_MP_APB1ENSETR_UART7EN		BIT(18)
+#define RCC_MP_APB1ENSETR_UART8EN		BIT(19)
+#define RCC_MP_APB1ENSETR_I2C1EN		BIT(21)
+#define RCC_MP_APB1ENSETR_I2C2EN		BIT(22)
+#define RCC_MP_APB1ENSETR_I2C3EN		BIT(23)
+#define RCC_MP_APB1ENSETR_I2C5EN		BIT(24)
+#define RCC_MP_APB1ENSETR_SPDIFEN		BIT(26)
+#define RCC_MP_APB1ENSETR_CECEN			BIT(27)
+#define RCC_MP_APB1ENSETR_DAC12EN		BIT(29)
+#define RCC_MP_APB1ENSETR_MDIOSEN		BIT(31)
+
+/* RCC_MP_APB1ENCLRR register fields */
+#define RCC_MP_APB1ENCLRR_TIM2EN		BIT(0)
+#define RCC_MP_APB1ENCLRR_TIM3EN		BIT(1)
+#define RCC_MP_APB1ENCLRR_TIM4EN		BIT(2)
+#define RCC_MP_APB1ENCLRR_TIM5EN		BIT(3)
+#define RCC_MP_APB1ENCLRR_TIM6EN		BIT(4)
+#define RCC_MP_APB1ENCLRR_TIM7EN		BIT(5)
+#define RCC_MP_APB1ENCLRR_TIM12EN		BIT(6)
+#define RCC_MP_APB1ENCLRR_TIM13EN		BIT(7)
+#define RCC_MP_APB1ENCLRR_TIM14EN		BIT(8)
+#define RCC_MP_APB1ENCLRR_LPTIM1EN		BIT(9)
+#define RCC_MP_APB1ENCLRR_SPI2EN		BIT(11)
+#define RCC_MP_APB1ENCLRR_SPI3EN		BIT(12)
+#define RCC_MP_APB1ENCLRR_USART2EN		BIT(14)
+#define RCC_MP_APB1ENCLRR_USART3EN		BIT(15)
+#define RCC_MP_APB1ENCLRR_UART4EN		BIT(16)
+#define RCC_MP_APB1ENCLRR_UART5EN		BIT(17)
+#define RCC_MP_APB1ENCLRR_UART7EN		BIT(18)
+#define RCC_MP_APB1ENCLRR_UART8EN		BIT(19)
+#define RCC_MP_APB1ENCLRR_I2C1EN		BIT(21)
+#define RCC_MP_APB1ENCLRR_I2C2EN		BIT(22)
+#define RCC_MP_APB1ENCLRR_I2C3EN		BIT(23)
+#define RCC_MP_APB1ENCLRR_I2C5EN		BIT(24)
+#define RCC_MP_APB1ENCLRR_SPDIFEN		BIT(26)
+#define RCC_MP_APB1ENCLRR_CECEN			BIT(27)
+#define RCC_MP_APB1ENCLRR_DAC12EN		BIT(29)
+#define RCC_MP_APB1ENCLRR_MDIOSEN		BIT(31)
+
+/* RCC_MP_APB2ENSETR register fields */
+#define RCC_MP_APB2ENSETR_TIM1EN		BIT(0)
+#define RCC_MP_APB2ENSETR_TIM8EN		BIT(1)
+#define RCC_MP_APB2ENSETR_TIM15EN		BIT(2)
+#define RCC_MP_APB2ENSETR_TIM16EN		BIT(3)
+#define RCC_MP_APB2ENSETR_TIM17EN		BIT(4)
+#define RCC_MP_APB2ENSETR_SPI1EN		BIT(8)
+#define RCC_MP_APB2ENSETR_SPI4EN		BIT(9)
+#define RCC_MP_APB2ENSETR_SPI5EN		BIT(10)
+#define RCC_MP_APB2ENSETR_USART6EN		BIT(13)
+#define RCC_MP_APB2ENSETR_SAI1EN		BIT(16)
+#define RCC_MP_APB2ENSETR_SAI2EN		BIT(17)
+#define RCC_MP_APB2ENSETR_SAI3EN		BIT(18)
+#define RCC_MP_APB2ENSETR_DFSDMEN		BIT(20)
+#define RCC_MP_APB2ENSETR_ADFSDMEN		BIT(21)
+#define RCC_MP_APB2ENSETR_FDCANEN		BIT(24)
+
+/* RCC_MP_APB2ENCLRR register fields */
+#define RCC_MP_APB2ENCLRR_TIM1EN		BIT(0)
+#define RCC_MP_APB2ENCLRR_TIM8EN		BIT(1)
+#define RCC_MP_APB2ENCLRR_TIM15EN		BIT(2)
+#define RCC_MP_APB2ENCLRR_TIM16EN		BIT(3)
+#define RCC_MP_APB2ENCLRR_TIM17EN		BIT(4)
+#define RCC_MP_APB2ENCLRR_SPI1EN		BIT(8)
+#define RCC_MP_APB2ENCLRR_SPI4EN		BIT(9)
+#define RCC_MP_APB2ENCLRR_SPI5EN		BIT(10)
+#define RCC_MP_APB2ENCLRR_USART6EN		BIT(13)
+#define RCC_MP_APB2ENCLRR_SAI1EN		BIT(16)
+#define RCC_MP_APB2ENCLRR_SAI2EN		BIT(17)
+#define RCC_MP_APB2ENCLRR_SAI3EN		BIT(18)
+#define RCC_MP_APB2ENCLRR_DFSDMEN		BIT(20)
+#define RCC_MP_APB2ENCLRR_ADFSDMEN		BIT(21)
+#define RCC_MP_APB2ENCLRR_FDCANEN		BIT(24)
+
+/* RCC_MP_APB3ENSETR register fields */
+#define RCC_MP_APB3ENSETR_LPTIM2EN		BIT(0)
+#define RCC_MP_APB3ENSETR_LPTIM3EN		BIT(1)
+#define RCC_MP_APB3ENSETR_LPTIM4EN		BIT(2)
+#define RCC_MP_APB3ENSETR_LPTIM5EN		BIT(3)
+#define RCC_MP_APB3ENSETR_SAI4EN		BIT(8)
+#define RCC_MP_APB3ENSETR_SYSCFGEN		BIT(11)
+#define RCC_MP_APB3ENSETR_VREFEN		BIT(13)
+#define RCC_MP_APB3ENSETR_TMPSENSEN		BIT(16)
+#define RCC_MP_APB3ENSETR_PMBCTRLEN		BIT(17)
+#define RCC_MP_APB3ENSETR_HDPEN			BIT(20)
+
+/* RCC_MP_APB3ENCLRR register fields */
+#define RCC_MP_APB3ENCLRR_LPTIM2EN		BIT(0)
+#define RCC_MP_APB3ENCLRR_LPTIM3EN		BIT(1)
+#define RCC_MP_APB3ENCLRR_LPTIM4EN		BIT(2)
+#define RCC_MP_APB3ENCLRR_LPTIM5EN		BIT(3)
+#define RCC_MP_APB3ENCLRR_SAI4EN		BIT(8)
+#define RCC_MP_APB3ENCLRR_SYSCFGEN		BIT(11)
+#define RCC_MP_APB3ENCLRR_VREFEN		BIT(13)
+#define RCC_MP_APB3ENCLRR_TMPSENSEN		BIT(16)
+#define RCC_MP_APB3ENCLRR_PMBCTRLEN		BIT(17)
+#define RCC_MP_APB3ENCLRR_HDPEN			BIT(20)
+
+/* RCC_MP_AHB2ENSETR register fields */
+#define RCC_MP_AHB2ENSETR_DMA1EN		BIT(0)
+#define RCC_MP_AHB2ENSETR_DMA2EN		BIT(1)
+#define RCC_MP_AHB2ENSETR_DMAMUXEN		BIT(2)
+#define RCC_MP_AHB2ENSETR_ADC12EN		BIT(5)
+#define RCC_MP_AHB2ENSETR_USBOEN		BIT(8)
+#define RCC_MP_AHB2ENSETR_SDMMC3EN		BIT(16)
+
+/* RCC_MP_AHB2ENCLRR register fields */
+#define RCC_MP_AHB2ENCLRR_DMA1EN		BIT(0)
+#define RCC_MP_AHB2ENCLRR_DMA2EN		BIT(1)
+#define RCC_MP_AHB2ENCLRR_DMAMUXEN		BIT(2)
+#define RCC_MP_AHB2ENCLRR_ADC12EN		BIT(5)
+#define RCC_MP_AHB2ENCLRR_USBOEN		BIT(8)
+#define RCC_MP_AHB2ENCLRR_SDMMC3EN		BIT(16)
+
+/* RCC_MP_AHB3ENSETR register fields */
+#define RCC_MP_AHB3ENSETR_DCMIEN		BIT(0)
+#define RCC_MP_AHB3ENSETR_CRYP2EN		BIT(4)
+#define RCC_MP_AHB3ENSETR_HASH2EN		BIT(5)
+#define RCC_MP_AHB3ENSETR_RNG2EN		BIT(6)
+#define RCC_MP_AHB3ENSETR_CRC2EN		BIT(7)
+#define RCC_MP_AHB3ENSETR_HSEMEN		BIT(11)
+#define RCC_MP_AHB3ENSETR_IPCCEN		BIT(12)
+
+/* RCC_MP_AHB3ENCLRR register fields */
+#define RCC_MP_AHB3ENCLRR_DCMIEN		BIT(0)
+#define RCC_MP_AHB3ENCLRR_CRYP2EN		BIT(4)
+#define RCC_MP_AHB3ENCLRR_HASH2EN		BIT(5)
+#define RCC_MP_AHB3ENCLRR_RNG2EN		BIT(6)
+#define RCC_MP_AHB3ENCLRR_CRC2EN		BIT(7)
+#define RCC_MP_AHB3ENCLRR_HSEMEN		BIT(11)
+#define RCC_MP_AHB3ENCLRR_IPCCEN		BIT(12)
+
+/* RCC_MP_AHB4ENSETR register fields */
+#define RCC_MP_AHB4ENSETR_GPIOAEN		BIT(0)
+#define RCC_MP_AHB4ENSETR_GPIOBEN		BIT(1)
+#define RCC_MP_AHB4ENSETR_GPIOCEN		BIT(2)
+#define RCC_MP_AHB4ENSETR_GPIODEN		BIT(3)
+#define RCC_MP_AHB4ENSETR_GPIOEEN		BIT(4)
+#define RCC_MP_AHB4ENSETR_GPIOFEN		BIT(5)
+#define RCC_MP_AHB4ENSETR_GPIOGEN		BIT(6)
+#define RCC_MP_AHB4ENSETR_GPIOHEN		BIT(7)
+#define RCC_MP_AHB4ENSETR_GPIOIEN		BIT(8)
+#define RCC_MP_AHB4ENSETR_GPIOJEN		BIT(9)
+#define RCC_MP_AHB4ENSETR_GPIOKEN		BIT(10)
+
+/* RCC_MP_AHB4ENCLRR register fields */
+#define RCC_MP_AHB4ENCLRR_GPIOAEN		BIT(0)
+#define RCC_MP_AHB4ENCLRR_GPIOBEN		BIT(1)
+#define RCC_MP_AHB4ENCLRR_GPIOCEN		BIT(2)
+#define RCC_MP_AHB4ENCLRR_GPIODEN		BIT(3)
+#define RCC_MP_AHB4ENCLRR_GPIOEEN		BIT(4)
+#define RCC_MP_AHB4ENCLRR_GPIOFEN		BIT(5)
+#define RCC_MP_AHB4ENCLRR_GPIOGEN		BIT(6)
+#define RCC_MP_AHB4ENCLRR_GPIOHEN		BIT(7)
+#define RCC_MP_AHB4ENCLRR_GPIOIEN		BIT(8)
+#define RCC_MP_AHB4ENCLRR_GPIOJEN		BIT(9)
+#define RCC_MP_AHB4ENCLRR_GPIOKEN		BIT(10)
+
+/* RCC_MP_MLAHBENSETR register fields */
+#define RCC_MP_MLAHBENSETR_RETRAMEN		BIT(4)
+
+/* RCC_MP_MLAHBENCLRR register fields */
+#define RCC_MP_MLAHBENCLRR_RETRAMEN		BIT(4)
+
+/* RCC_MC_APB1ENSETR register fields */
+#define RCC_MC_APB1ENSETR_TIM2EN		BIT(0)
+#define RCC_MC_APB1ENSETR_TIM3EN		BIT(1)
+#define RCC_MC_APB1ENSETR_TIM4EN		BIT(2)
+#define RCC_MC_APB1ENSETR_TIM5EN		BIT(3)
+#define RCC_MC_APB1ENSETR_TIM6EN		BIT(4)
+#define RCC_MC_APB1ENSETR_TIM7EN		BIT(5)
+#define RCC_MC_APB1ENSETR_TIM12EN		BIT(6)
+#define RCC_MC_APB1ENSETR_TIM13EN		BIT(7)
+#define RCC_MC_APB1ENSETR_TIM14EN		BIT(8)
+#define RCC_MC_APB1ENSETR_LPTIM1EN		BIT(9)
+#define RCC_MC_APB1ENSETR_SPI2EN		BIT(11)
+#define RCC_MC_APB1ENSETR_SPI3EN		BIT(12)
+#define RCC_MC_APB1ENSETR_USART2EN		BIT(14)
+#define RCC_MC_APB1ENSETR_USART3EN		BIT(15)
+#define RCC_MC_APB1ENSETR_UART4EN		BIT(16)
+#define RCC_MC_APB1ENSETR_UART5EN		BIT(17)
+#define RCC_MC_APB1ENSETR_UART7EN		BIT(18)
+#define RCC_MC_APB1ENSETR_UART8EN		BIT(19)
+#define RCC_MC_APB1ENSETR_I2C1EN		BIT(21)
+#define RCC_MC_APB1ENSETR_I2C2EN		BIT(22)
+#define RCC_MC_APB1ENSETR_I2C3EN		BIT(23)
+#define RCC_MC_APB1ENSETR_I2C5EN		BIT(24)
+#define RCC_MC_APB1ENSETR_SPDIFEN		BIT(26)
+#define RCC_MC_APB1ENSETR_CECEN			BIT(27)
+#define RCC_MC_APB1ENSETR_WWDG1EN		BIT(28)
+#define RCC_MC_APB1ENSETR_DAC12EN		BIT(29)
+#define RCC_MC_APB1ENSETR_MDIOSEN		BIT(31)
+
+/* RCC_MC_APB1ENCLRR register fields */
+#define RCC_MC_APB1ENCLRR_TIM2EN		BIT(0)
+#define RCC_MC_APB1ENCLRR_TIM3EN		BIT(1)
+#define RCC_MC_APB1ENCLRR_TIM4EN		BIT(2)
+#define RCC_MC_APB1ENCLRR_TIM5EN		BIT(3)
+#define RCC_MC_APB1ENCLRR_TIM6EN		BIT(4)
+#define RCC_MC_APB1ENCLRR_TIM7EN		BIT(5)
+#define RCC_MC_APB1ENCLRR_TIM12EN		BIT(6)
+#define RCC_MC_APB1ENCLRR_TIM13EN		BIT(7)
+#define RCC_MC_APB1ENCLRR_TIM14EN		BIT(8)
+#define RCC_MC_APB1ENCLRR_LPTIM1EN		BIT(9)
+#define RCC_MC_APB1ENCLRR_SPI2EN		BIT(11)
+#define RCC_MC_APB1ENCLRR_SPI3EN		BIT(12)
+#define RCC_MC_APB1ENCLRR_USART2EN		BIT(14)
+#define RCC_MC_APB1ENCLRR_USART3EN		BIT(15)
+#define RCC_MC_APB1ENCLRR_UART4EN		BIT(16)
+#define RCC_MC_APB1ENCLRR_UART5EN		BIT(17)
+#define RCC_MC_APB1ENCLRR_UART7EN		BIT(18)
+#define RCC_MC_APB1ENCLRR_UART8EN		BIT(19)
+#define RCC_MC_APB1ENCLRR_I2C1EN		BIT(21)
+#define RCC_MC_APB1ENCLRR_I2C2EN		BIT(22)
+#define RCC_MC_APB1ENCLRR_I2C3EN		BIT(23)
+#define RCC_MC_APB1ENCLRR_I2C5EN		BIT(24)
+#define RCC_MC_APB1ENCLRR_SPDIFEN		BIT(26)
+#define RCC_MC_APB1ENCLRR_CECEN			BIT(27)
+#define RCC_MC_APB1ENCLRR_DAC12EN		BIT(29)
+#define RCC_MC_APB1ENCLRR_MDIOSEN		BIT(31)
+
+/* RCC_MC_APB2ENSETR register fields */
+#define RCC_MC_APB2ENSETR_TIM1EN		BIT(0)
+#define RCC_MC_APB2ENSETR_TIM8EN		BIT(1)
+#define RCC_MC_APB2ENSETR_TIM15EN		BIT(2)
+#define RCC_MC_APB2ENSETR_TIM16EN		BIT(3)
+#define RCC_MC_APB2ENSETR_TIM17EN		BIT(4)
+#define RCC_MC_APB2ENSETR_SPI1EN		BIT(8)
+#define RCC_MC_APB2ENSETR_SPI4EN		BIT(9)
+#define RCC_MC_APB2ENSETR_SPI5EN		BIT(10)
+#define RCC_MC_APB2ENSETR_USART6EN		BIT(13)
+#define RCC_MC_APB2ENSETR_SAI1EN		BIT(16)
+#define RCC_MC_APB2ENSETR_SAI2EN		BIT(17)
+#define RCC_MC_APB2ENSETR_SAI3EN		BIT(18)
+#define RCC_MC_APB2ENSETR_DFSDMEN		BIT(20)
+#define RCC_MC_APB2ENSETR_ADFSDMEN		BIT(21)
+#define RCC_MC_APB2ENSETR_FDCANEN		BIT(24)
+
+/* RCC_MC_APB2ENCLRR register fields */
+#define RCC_MC_APB2ENCLRR_TIM1EN		BIT(0)
+#define RCC_MC_APB2ENCLRR_TIM8EN		BIT(1)
+#define RCC_MC_APB2ENCLRR_TIM15EN		BIT(2)
+#define RCC_MC_APB2ENCLRR_TIM16EN		BIT(3)
+#define RCC_MC_APB2ENCLRR_TIM17EN		BIT(4)
+#define RCC_MC_APB2ENCLRR_SPI1EN		BIT(8)
+#define RCC_MC_APB2ENCLRR_SPI4EN		BIT(9)
+#define RCC_MC_APB2ENCLRR_SPI5EN		BIT(10)
+#define RCC_MC_APB2ENCLRR_USART6EN		BIT(13)
+#define RCC_MC_APB2ENCLRR_SAI1EN		BIT(16)
+#define RCC_MC_APB2ENCLRR_SAI2EN		BIT(17)
+#define RCC_MC_APB2ENCLRR_SAI3EN		BIT(18)
+#define RCC_MC_APB2ENCLRR_DFSDMEN		BIT(20)
+#define RCC_MC_APB2ENCLRR_ADFSDMEN		BIT(21)
+#define RCC_MC_APB2ENCLRR_FDCANEN		BIT(24)
+
+/* RCC_MC_APB3ENSETR register fields */
+#define RCC_MC_APB3ENSETR_LPTIM2EN		BIT(0)
+#define RCC_MC_APB3ENSETR_LPTIM3EN		BIT(1)
+#define RCC_MC_APB3ENSETR_LPTIM4EN		BIT(2)
+#define RCC_MC_APB3ENSETR_LPTIM5EN		BIT(3)
+#define RCC_MC_APB3ENSETR_SAI4EN		BIT(8)
+#define RCC_MC_APB3ENSETR_SYSCFGEN		BIT(11)
+#define RCC_MC_APB3ENSETR_VREFEN		BIT(13)
+#define RCC_MC_APB3ENSETR_TMPSENSEN		BIT(16)
+#define RCC_MC_APB3ENSETR_PMBCTRLEN		BIT(17)
+#define RCC_MC_APB3ENSETR_HDPEN			BIT(20)
+
+/* RCC_MC_APB3ENCLRR register fields */
+#define RCC_MC_APB3ENCLRR_LPTIM2EN		BIT(0)
+#define RCC_MC_APB3ENCLRR_LPTIM3EN		BIT(1)
+#define RCC_MC_APB3ENCLRR_LPTIM4EN		BIT(2)
+#define RCC_MC_APB3ENCLRR_LPTIM5EN		BIT(3)
+#define RCC_MC_APB3ENCLRR_SAI4EN		BIT(8)
+#define RCC_MC_APB3ENCLRR_SYSCFGEN		BIT(11)
+#define RCC_MC_APB3ENCLRR_VREFEN		BIT(13)
+#define RCC_MC_APB3ENCLRR_TMPSENSEN		BIT(16)
+#define RCC_MC_APB3ENCLRR_PMBCTRLEN		BIT(17)
+#define RCC_MC_APB3ENCLRR_HDPEN			BIT(20)
+
+/* RCC_MC_AHB2ENSETR register fields */
+#define RCC_MC_AHB2ENSETR_DMA1EN		BIT(0)
+#define RCC_MC_AHB2ENSETR_DMA2EN		BIT(1)
+#define RCC_MC_AHB2ENSETR_DMAMUXEN		BIT(2)
+#define RCC_MC_AHB2ENSETR_ADC12EN		BIT(5)
+#define RCC_MC_AHB2ENSETR_USBOEN		BIT(8)
+#define RCC_MC_AHB2ENSETR_SDMMC3EN		BIT(16)
+
+/* RCC_MC_AHB2ENCLRR register fields */
+#define RCC_MC_AHB2ENCLRR_DMA1EN		BIT(0)
+#define RCC_MC_AHB2ENCLRR_DMA2EN		BIT(1)
+#define RCC_MC_AHB2ENCLRR_DMAMUXEN		BIT(2)
+#define RCC_MC_AHB2ENCLRR_ADC12EN		BIT(5)
+#define RCC_MC_AHB2ENCLRR_USBOEN		BIT(8)
+#define RCC_MC_AHB2ENCLRR_SDMMC3EN		BIT(16)
+
+/* RCC_MC_AHB3ENSETR register fields */
+#define RCC_MC_AHB3ENSETR_DCMIEN		BIT(0)
+#define RCC_MC_AHB3ENSETR_CRYP2EN		BIT(4)
+#define RCC_MC_AHB3ENSETR_HASH2EN		BIT(5)
+#define RCC_MC_AHB3ENSETR_RNG2EN		BIT(6)
+#define RCC_MC_AHB3ENSETR_CRC2EN		BIT(7)
+#define RCC_MC_AHB3ENSETR_HSEMEN		BIT(11)
+#define RCC_MC_AHB3ENSETR_IPCCEN		BIT(12)
+
+/* RCC_MC_AHB3ENCLRR register fields */
+#define RCC_MC_AHB3ENCLRR_DCMIEN		BIT(0)
+#define RCC_MC_AHB3ENCLRR_CRYP2EN		BIT(4)
+#define RCC_MC_AHB3ENCLRR_HASH2EN		BIT(5)
+#define RCC_MC_AHB3ENCLRR_RNG2EN		BIT(6)
+#define RCC_MC_AHB3ENCLRR_CRC2EN		BIT(7)
+#define RCC_MC_AHB3ENCLRR_HSEMEN		BIT(11)
+#define RCC_MC_AHB3ENCLRR_IPCCEN		BIT(12)
+
+/* RCC_MC_AHB4ENSETR register fields */
+#define RCC_MC_AHB4ENSETR_GPIOAEN		BIT(0)
+#define RCC_MC_AHB4ENSETR_GPIOBEN		BIT(1)
+#define RCC_MC_AHB4ENSETR_GPIOCEN		BIT(2)
+#define RCC_MC_AHB4ENSETR_GPIODEN		BIT(3)
+#define RCC_MC_AHB4ENSETR_GPIOEEN		BIT(4)
+#define RCC_MC_AHB4ENSETR_GPIOFEN		BIT(5)
+#define RCC_MC_AHB4ENSETR_GPIOGEN		BIT(6)
+#define RCC_MC_AHB4ENSETR_GPIOHEN		BIT(7)
+#define RCC_MC_AHB4ENSETR_GPIOIEN		BIT(8)
+#define RCC_MC_AHB4ENSETR_GPIOJEN		BIT(9)
+#define RCC_MC_AHB4ENSETR_GPIOKEN		BIT(10)
+
+/* RCC_MC_AHB4ENCLRR register fields */
+#define RCC_MC_AHB4ENCLRR_GPIOAEN		BIT(0)
+#define RCC_MC_AHB4ENCLRR_GPIOBEN		BIT(1)
+#define RCC_MC_AHB4ENCLRR_GPIOCEN		BIT(2)
+#define RCC_MC_AHB4ENCLRR_GPIODEN		BIT(3)
+#define RCC_MC_AHB4ENCLRR_GPIOEEN		BIT(4)
+#define RCC_MC_AHB4ENCLRR_GPIOFEN		BIT(5)
+#define RCC_MC_AHB4ENCLRR_GPIOGEN		BIT(6)
+#define RCC_MC_AHB4ENCLRR_GPIOHEN		BIT(7)
+#define RCC_MC_AHB4ENCLRR_GPIOIEN		BIT(8)
+#define RCC_MC_AHB4ENCLRR_GPIOJEN		BIT(9)
+#define RCC_MC_AHB4ENCLRR_GPIOKEN		BIT(10)
+
+/* RCC_MC_AXIMENSETR register fields */
+#define RCC_MC_AXIMENSETR_SYSRAMEN		BIT(0)
+
+/* RCC_MC_AXIMENCLRR register fields */
+#define RCC_MC_AXIMENCLRR_SYSRAMEN		BIT(0)
+
+/* RCC_MC_MLAHBENSETR register fields */
+#define RCC_MC_MLAHBENSETR_RETRAMEN		BIT(4)
+
+/* RCC_MC_MLAHBENCLRR register fields */
+#define RCC_MC_MLAHBENCLRR_RETRAMEN		BIT(4)
+
+/* RCC_MP_APB1LPENSETR register fields */
+#define RCC_MP_APB1LPENSETR_TIM2LPEN		BIT(0)
+#define RCC_MP_APB1LPENSETR_TIM3LPEN		BIT(1)
+#define RCC_MP_APB1LPENSETR_TIM4LPEN		BIT(2)
+#define RCC_MP_APB1LPENSETR_TIM5LPEN		BIT(3)
+#define RCC_MP_APB1LPENSETR_TIM6LPEN		BIT(4)
+#define RCC_MP_APB1LPENSETR_TIM7LPEN		BIT(5)
+#define RCC_MP_APB1LPENSETR_TIM12LPEN		BIT(6)
+#define RCC_MP_APB1LPENSETR_TIM13LPEN		BIT(7)
+#define RCC_MP_APB1LPENSETR_TIM14LPEN		BIT(8)
+#define RCC_MP_APB1LPENSETR_LPTIM1LPEN		BIT(9)
+#define RCC_MP_APB1LPENSETR_SPI2LPEN		BIT(11)
+#define RCC_MP_APB1LPENSETR_SPI3LPEN		BIT(12)
+#define RCC_MP_APB1LPENSETR_USART2LPEN		BIT(14)
+#define RCC_MP_APB1LPENSETR_USART3LPEN		BIT(15)
+#define RCC_MP_APB1LPENSETR_UART4LPEN		BIT(16)
+#define RCC_MP_APB1LPENSETR_UART5LPEN		BIT(17)
+#define RCC_MP_APB1LPENSETR_UART7LPEN		BIT(18)
+#define RCC_MP_APB1LPENSETR_UART8LPEN		BIT(19)
+#define RCC_MP_APB1LPENSETR_I2C1LPEN		BIT(21)
+#define RCC_MP_APB1LPENSETR_I2C2LPEN		BIT(22)
+#define RCC_MP_APB1LPENSETR_I2C3LPEN		BIT(23)
+#define RCC_MP_APB1LPENSETR_I2C5LPEN		BIT(24)
+#define RCC_MP_APB1LPENSETR_SPDIFLPEN		BIT(26)
+#define RCC_MP_APB1LPENSETR_CECLPEN		BIT(27)
+#define RCC_MP_APB1LPENSETR_DAC12LPEN		BIT(29)
+#define RCC_MP_APB1LPENSETR_MDIOSLPEN		BIT(31)
+
+/* RCC_MP_APB1LPENCLRR register fields */
+#define RCC_MP_APB1LPENCLRR_TIM2LPEN		BIT(0)
+#define RCC_MP_APB1LPENCLRR_TIM3LPEN		BIT(1)
+#define RCC_MP_APB1LPENCLRR_TIM4LPEN		BIT(2)
+#define RCC_MP_APB1LPENCLRR_TIM5LPEN		BIT(3)
+#define RCC_MP_APB1LPENCLRR_TIM6LPEN		BIT(4)
+#define RCC_MP_APB1LPENCLRR_TIM7LPEN		BIT(5)
+#define RCC_MP_APB1LPENCLRR_TIM12LPEN		BIT(6)
+#define RCC_MP_APB1LPENCLRR_TIM13LPEN		BIT(7)
+#define RCC_MP_APB1LPENCLRR_TIM14LPEN		BIT(8)
+#define RCC_MP_APB1LPENCLRR_LPTIM1LPEN		BIT(9)
+#define RCC_MP_APB1LPENCLRR_SPI2LPEN		BIT(11)
+#define RCC_MP_APB1LPENCLRR_SPI3LPEN		BIT(12)
+#define RCC_MP_APB1LPENCLRR_USART2LPEN		BIT(14)
+#define RCC_MP_APB1LPENCLRR_USART3LPEN		BIT(15)
+#define RCC_MP_APB1LPENCLRR_UART4LPEN		BIT(16)
+#define RCC_MP_APB1LPENCLRR_UART5LPEN		BIT(17)
+#define RCC_MP_APB1LPENCLRR_UART7LPEN		BIT(18)
+#define RCC_MP_APB1LPENCLRR_UART8LPEN		BIT(19)
+#define RCC_MP_APB1LPENCLRR_I2C1LPEN		BIT(21)
+#define RCC_MP_APB1LPENCLRR_I2C2LPEN		BIT(22)
+#define RCC_MP_APB1LPENCLRR_I2C3LPEN		BIT(23)
+#define RCC_MP_APB1LPENCLRR_I2C5LPEN		BIT(24)
+#define RCC_MP_APB1LPENCLRR_SPDIFLPEN		BIT(26)
+#define RCC_MP_APB1LPENCLRR_CECLPEN		BIT(27)
+#define RCC_MP_APB1LPENCLRR_DAC12LPEN		BIT(29)
+#define RCC_MP_APB1LPENCLRR_MDIOSLPEN		BIT(31)
+
+/* RCC_MP_APB2LPENSETR register fields */
+#define RCC_MP_APB2LPENSETR_TIM1LPEN		BIT(0)
+#define RCC_MP_APB2LPENSETR_TIM8LPEN		BIT(1)
+#define RCC_MP_APB2LPENSETR_TIM15LPEN		BIT(2)
+#define RCC_MP_APB2LPENSETR_TIM16LPEN		BIT(3)
+#define RCC_MP_APB2LPENSETR_TIM17LPEN		BIT(4)
+#define RCC_MP_APB2LPENSETR_SPI1LPEN		BIT(8)
+#define RCC_MP_APB2LPENSETR_SPI4LPEN		BIT(9)
+#define RCC_MP_APB2LPENSETR_SPI5LPEN		BIT(10)
+#define RCC_MP_APB2LPENSETR_USART6LPEN		BIT(13)
+#define RCC_MP_APB2LPENSETR_SAI1LPEN		BIT(16)
+#define RCC_MP_APB2LPENSETR_SAI2LPEN		BIT(17)
+#define RCC_MP_APB2LPENSETR_SAI3LPEN		BIT(18)
+#define RCC_MP_APB2LPENSETR_DFSDMLPEN		BIT(20)
+#define RCC_MP_APB2LPENSETR_ADFSDMLPEN		BIT(21)
+#define RCC_MP_APB2LPENSETR_FDCANLPEN		BIT(24)
+
+/* RCC_MP_APB2LPENCLRR register fields */
+#define RCC_MP_APB2LPENCLRR_TIM1LPEN		BIT(0)
+#define RCC_MP_APB2LPENCLRR_TIM8LPEN		BIT(1)
+#define RCC_MP_APB2LPENCLRR_TIM15LPEN		BIT(2)
+#define RCC_MP_APB2LPENCLRR_TIM16LPEN		BIT(3)
+#define RCC_MP_APB2LPENCLRR_TIM17LPEN		BIT(4)
+#define RCC_MP_APB2LPENCLRR_SPI1LPEN		BIT(8)
+#define RCC_MP_APB2LPENCLRR_SPI4LPEN		BIT(9)
+#define RCC_MP_APB2LPENCLRR_SPI5LPEN		BIT(10)
+#define RCC_MP_APB2LPENCLRR_USART6LPEN		BIT(13)
+#define RCC_MP_APB2LPENCLRR_SAI1LPEN		BIT(16)
+#define RCC_MP_APB2LPENCLRR_SAI2LPEN		BIT(17)
+#define RCC_MP_APB2LPENCLRR_SAI3LPEN		BIT(18)
+#define RCC_MP_APB2LPENCLRR_DFSDMLPEN		BIT(20)
+#define RCC_MP_APB2LPENCLRR_ADFSDMLPEN		BIT(21)
+#define RCC_MP_APB2LPENCLRR_FDCANLPEN		BIT(24)
+
+/* RCC_MP_APB3LPENSETR register fields */
+#define RCC_MP_APB3LPENSETR_LPTIM2LPEN		BIT(0)
+#define RCC_MP_APB3LPENSETR_LPTIM3LPEN		BIT(1)
+#define RCC_MP_APB3LPENSETR_LPTIM4LPEN		BIT(2)
+#define RCC_MP_APB3LPENSETR_LPTIM5LPEN		BIT(3)
+#define RCC_MP_APB3LPENSETR_SAI4LPEN		BIT(8)
+#define RCC_MP_APB3LPENSETR_SYSCFGLPEN		BIT(11)
+#define RCC_MP_APB3LPENSETR_VREFLPEN		BIT(13)
+#define RCC_MP_APB3LPENSETR_TMPSENSLPEN		BIT(16)
+#define RCC_MP_APB3LPENSETR_PMBCTRLLPEN		BIT(17)
+
+/* RCC_MP_APB3LPENCLRR register fields */
+#define RCC_MP_APB3LPENCLRR_LPTIM2LPEN		BIT(0)
+#define RCC_MP_APB3LPENCLRR_LPTIM3LPEN		BIT(1)
+#define RCC_MP_APB3LPENCLRR_LPTIM4LPEN		BIT(2)
+#define RCC_MP_APB3LPENCLRR_LPTIM5LPEN		BIT(3)
+#define RCC_MP_APB3LPENCLRR_SAI4LPEN		BIT(8)
+#define RCC_MP_APB3LPENCLRR_SYSCFGLPEN		BIT(11)
+#define RCC_MP_APB3LPENCLRR_VREFLPEN		BIT(13)
+#define RCC_MP_APB3LPENCLRR_TMPSENSLPEN		BIT(16)
+#define RCC_MP_APB3LPENCLRR_PMBCTRLLPEN		BIT(17)
+
+/* RCC_MP_AHB2LPENSETR register fields */
+#define RCC_MP_AHB2LPENSETR_DMA1LPEN		BIT(0)
+#define RCC_MP_AHB2LPENSETR_DMA2LPEN		BIT(1)
+#define RCC_MP_AHB2LPENSETR_DMAMUXLPEN		BIT(2)
+#define RCC_MP_AHB2LPENSETR_ADC12LPEN		BIT(5)
+#define RCC_MP_AHB2LPENSETR_USBOLPEN		BIT(8)
+#define RCC_MP_AHB2LPENSETR_SDMMC3LPEN		BIT(16)
+
+/* RCC_MP_AHB2LPENCLRR register fields */
+#define RCC_MP_AHB2LPENCLRR_DMA1LPEN		BIT(0)
+#define RCC_MP_AHB2LPENCLRR_DMA2LPEN		BIT(1)
+#define RCC_MP_AHB2LPENCLRR_DMAMUXLPEN		BIT(2)
+#define RCC_MP_AHB2LPENCLRR_ADC12LPEN		BIT(5)
+#define RCC_MP_AHB2LPENCLRR_USBOLPEN		BIT(8)
+#define RCC_MP_AHB2LPENCLRR_SDMMC3LPEN		BIT(16)
+
+/* RCC_MP_AHB3LPENSETR register fields */
+#define RCC_MP_AHB3LPENSETR_DCMILPEN		BIT(0)
+#define RCC_MP_AHB3LPENSETR_CRYP2LPEN		BIT(4)
+#define RCC_MP_AHB3LPENSETR_HASH2LPEN		BIT(5)
+#define RCC_MP_AHB3LPENSETR_RNG2LPEN		BIT(6)
+#define RCC_MP_AHB3LPENSETR_CRC2LPEN		BIT(7)
+#define RCC_MP_AHB3LPENSETR_HSEMLPEN		BIT(11)
+#define RCC_MP_AHB3LPENSETR_IPCCLPEN		BIT(12)
+
+/* RCC_MP_AHB3LPENCLRR register fields */
+#define RCC_MP_AHB3LPENCLRR_DCMILPEN		BIT(0)
+#define RCC_MP_AHB3LPENCLRR_CRYP2LPEN		BIT(4)
+#define RCC_MP_AHB3LPENCLRR_HASH2LPEN		BIT(5)
+#define RCC_MP_AHB3LPENCLRR_RNG2LPEN		BIT(6)
+#define RCC_MP_AHB3LPENCLRR_CRC2LPEN		BIT(7)
+#define RCC_MP_AHB3LPENCLRR_HSEMLPEN		BIT(11)
+#define RCC_MP_AHB3LPENCLRR_IPCCLPEN		BIT(12)
+
+/* RCC_MP_AHB4LPENSETR register fields */
+#define RCC_MP_AHB4LPENSETR_GPIOALPEN		BIT(0)
+#define RCC_MP_AHB4LPENSETR_GPIOBLPEN		BIT(1)
+#define RCC_MP_AHB4LPENSETR_GPIOCLPEN		BIT(2)
+#define RCC_MP_AHB4LPENSETR_GPIODLPEN		BIT(3)
+#define RCC_MP_AHB4LPENSETR_GPIOELPEN		BIT(4)
+#define RCC_MP_AHB4LPENSETR_GPIOFLPEN		BIT(5)
+#define RCC_MP_AHB4LPENSETR_GPIOGLPEN		BIT(6)
+#define RCC_MP_AHB4LPENSETR_GPIOHLPEN		BIT(7)
+#define RCC_MP_AHB4LPENSETR_GPIOILPEN		BIT(8)
+#define RCC_MP_AHB4LPENSETR_GPIOJLPEN		BIT(9)
+#define RCC_MP_AHB4LPENSETR_GPIOKLPEN		BIT(10)
+
+/* RCC_MP_AHB4LPENCLRR register fields */
+#define RCC_MP_AHB4LPENCLRR_GPIOALPEN		BIT(0)
+#define RCC_MP_AHB4LPENCLRR_GPIOBLPEN		BIT(1)
+#define RCC_MP_AHB4LPENCLRR_GPIOCLPEN		BIT(2)
+#define RCC_MP_AHB4LPENCLRR_GPIODLPEN		BIT(3)
+#define RCC_MP_AHB4LPENCLRR_GPIOELPEN		BIT(4)
+#define RCC_MP_AHB4LPENCLRR_GPIOFLPEN		BIT(5)
+#define RCC_MP_AHB4LPENCLRR_GPIOGLPEN		BIT(6)
+#define RCC_MP_AHB4LPENCLRR_GPIOHLPEN		BIT(7)
+#define RCC_MP_AHB4LPENCLRR_GPIOILPEN		BIT(8)
+#define RCC_MP_AHB4LPENCLRR_GPIOJLPEN		BIT(9)
+#define RCC_MP_AHB4LPENCLRR_GPIOKLPEN		BIT(10)
+
+/* RCC_MP_AXIMLPENSETR register fields */
+#define RCC_MP_AXIMLPENSETR_SYSRAMLPEN		BIT(0)
+
+/* RCC_MP_AXIMLPENCLRR register fields */
+#define RCC_MP_AXIMLPENCLRR_SYSRAMLPEN		BIT(0)
+
+/* RCC_MP_MLAHBLPENSETR register fields */
+#define RCC_MP_MLAHBLPENSETR_SRAM1LPEN		BIT(0)
+#define RCC_MP_MLAHBLPENSETR_SRAM2LPEN		BIT(1)
+#define RCC_MP_MLAHBLPENSETR_SRAM34LPEN		BIT(2)
+#define RCC_MP_MLAHBLPENSETR_RETRAMLPEN		BIT(4)
+
+/* RCC_MP_MLAHBLPENCLRR register fields */
+#define RCC_MP_MLAHBLPENCLRR_SRAM1LPEN		BIT(0)
+#define RCC_MP_MLAHBLPENCLRR_SRAM2LPEN		BIT(1)
+#define RCC_MP_MLAHBLPENCLRR_SRAM34LPEN		BIT(2)
+#define RCC_MP_MLAHBLPENCLRR_RETRAMLPEN		BIT(4)
+
+/* RCC_MC_APB1LPENSETR register fields */
+#define RCC_MC_APB1LPENSETR_TIM2LPEN		BIT(0)
+#define RCC_MC_APB1LPENSETR_TIM3LPEN		BIT(1)
+#define RCC_MC_APB1LPENSETR_TIM4LPEN		BIT(2)
+#define RCC_MC_APB1LPENSETR_TIM5LPEN		BIT(3)
+#define RCC_MC_APB1LPENSETR_TIM6LPEN		BIT(4)
+#define RCC_MC_APB1LPENSETR_TIM7LPEN		BIT(5)
+#define RCC_MC_APB1LPENSETR_TIM12LPEN		BIT(6)
+#define RCC_MC_APB1LPENSETR_TIM13LPEN		BIT(7)
+#define RCC_MC_APB1LPENSETR_TIM14LPEN		BIT(8)
+#define RCC_MC_APB1LPENSETR_LPTIM1LPEN		BIT(9)
+#define RCC_MC_APB1LPENSETR_SPI2LPEN		BIT(11)
+#define RCC_MC_APB1LPENSETR_SPI3LPEN		BIT(12)
+#define RCC_MC_APB1LPENSETR_USART2LPEN		BIT(14)
+#define RCC_MC_APB1LPENSETR_USART3LPEN		BIT(15)
+#define RCC_MC_APB1LPENSETR_UART4LPEN		BIT(16)
+#define RCC_MC_APB1LPENSETR_UART5LPEN		BIT(17)
+#define RCC_MC_APB1LPENSETR_UART7LPEN		BIT(18)
+#define RCC_MC_APB1LPENSETR_UART8LPEN		BIT(19)
+#define RCC_MC_APB1LPENSETR_I2C1LPEN		BIT(21)
+#define RCC_MC_APB1LPENSETR_I2C2LPEN		BIT(22)
+#define RCC_MC_APB1LPENSETR_I2C3LPEN		BIT(23)
+#define RCC_MC_APB1LPENSETR_I2C5LPEN		BIT(24)
+#define RCC_MC_APB1LPENSETR_SPDIFLPEN		BIT(26)
+#define RCC_MC_APB1LPENSETR_CECLPEN		BIT(27)
+#define RCC_MC_APB1LPENSETR_WWDG1LPEN		BIT(28)
+#define RCC_MC_APB1LPENSETR_DAC12LPEN		BIT(29)
+#define RCC_MC_APB1LPENSETR_MDIOSLPEN		BIT(31)
+
+/* RCC_MC_APB1LPENCLRR register fields */
+#define RCC_MC_APB1LPENCLRR_TIM2LPEN		BIT(0)
+#define RCC_MC_APB1LPENCLRR_TIM3LPEN		BIT(1)
+#define RCC_MC_APB1LPENCLRR_TIM4LPEN		BIT(2)
+#define RCC_MC_APB1LPENCLRR_TIM5LPEN		BIT(3)
+#define RCC_MC_APB1LPENCLRR_TIM6LPEN		BIT(4)
+#define RCC_MC_APB1LPENCLRR_TIM7LPEN		BIT(5)
+#define RCC_MC_APB1LPENCLRR_TIM12LPEN		BIT(6)
+#define RCC_MC_APB1LPENCLRR_TIM13LPEN		BIT(7)
+#define RCC_MC_APB1LPENCLRR_TIM14LPEN		BIT(8)
+#define RCC_MC_APB1LPENCLRR_LPTIM1LPEN		BIT(9)
+#define RCC_MC_APB1LPENCLRR_SPI2LPEN		BIT(11)
+#define RCC_MC_APB1LPENCLRR_SPI3LPEN		BIT(12)
+#define RCC_MC_APB1LPENCLRR_USART2LPEN		BIT(14)
+#define RCC_MC_APB1LPENCLRR_USART3LPEN		BIT(15)
+#define RCC_MC_APB1LPENCLRR_UART4LPEN		BIT(16)
+#define RCC_MC_APB1LPENCLRR_UART5LPEN		BIT(17)
+#define RCC_MC_APB1LPENCLRR_UART7LPEN		BIT(18)
+#define RCC_MC_APB1LPENCLRR_UART8LPEN		BIT(19)
+#define RCC_MC_APB1LPENCLRR_I2C1LPEN		BIT(21)
+#define RCC_MC_APB1LPENCLRR_I2C2LPEN		BIT(22)
+#define RCC_MC_APB1LPENCLRR_I2C3LPEN		BIT(23)
+#define RCC_MC_APB1LPENCLRR_I2C5LPEN		BIT(24)
+#define RCC_MC_APB1LPENCLRR_SPDIFLPEN		BIT(26)
+#define RCC_MC_APB1LPENCLRR_CECLPEN		BIT(27)
+#define RCC_MC_APB1LPENCLRR_WWDG1LPEN		BIT(28)
+#define RCC_MC_APB1LPENCLRR_DAC12LPEN		BIT(29)
+#define RCC_MC_APB1LPENCLRR_MDIOSLPEN		BIT(31)
+
+/* RCC_MC_APB2LPENSETR register fields */
+#define RCC_MC_APB2LPENSETR_TIM1LPEN		BIT(0)
+#define RCC_MC_APB2LPENSETR_TIM8LPEN		BIT(1)
+#define RCC_MC_APB2LPENSETR_TIM15LPEN		BIT(2)
+#define RCC_MC_APB2LPENSETR_TIM16LPEN		BIT(3)
+#define RCC_MC_APB2LPENSETR_TIM17LPEN		BIT(4)
+#define RCC_MC_APB2LPENSETR_SPI1LPEN		BIT(8)
+#define RCC_MC_APB2LPENSETR_SPI4LPEN		BIT(9)
+#define RCC_MC_APB2LPENSETR_SPI5LPEN		BIT(10)
+#define RCC_MC_APB2LPENSETR_USART6LPEN		BIT(13)
+#define RCC_MC_APB2LPENSETR_SAI1LPEN		BIT(16)
+#define RCC_MC_APB2LPENSETR_SAI2LPEN		BIT(17)
+#define RCC_MC_APB2LPENSETR_SAI3LPEN		BIT(18)
+#define RCC_MC_APB2LPENSETR_DFSDMLPEN		BIT(20)
+#define RCC_MC_APB2LPENSETR_ADFSDMLPEN		BIT(21)
+#define RCC_MC_APB2LPENSETR_FDCANLPEN		BIT(24)
+
+/* RCC_MC_APB2LPENCLRR register fields */
+#define RCC_MC_APB2LPENCLRR_TIM1LPEN		BIT(0)
+#define RCC_MC_APB2LPENCLRR_TIM8LPEN		BIT(1)
+#define RCC_MC_APB2LPENCLRR_TIM15LPEN		BIT(2)
+#define RCC_MC_APB2LPENCLRR_TIM16LPEN		BIT(3)
+#define RCC_MC_APB2LPENCLRR_TIM17LPEN		BIT(4)
+#define RCC_MC_APB2LPENCLRR_SPI1LPEN		BIT(8)
+#define RCC_MC_APB2LPENCLRR_SPI4LPEN		BIT(9)
+#define RCC_MC_APB2LPENCLRR_SPI5LPEN		BIT(10)
+#define RCC_MC_APB2LPENCLRR_USART6LPEN		BIT(13)
+#define RCC_MC_APB2LPENCLRR_SAI1LPEN		BIT(16)
+#define RCC_MC_APB2LPENCLRR_SAI2LPEN		BIT(17)
+#define RCC_MC_APB2LPENCLRR_SAI3LPEN		BIT(18)
+#define RCC_MC_APB2LPENCLRR_DFSDMLPEN		BIT(20)
+#define RCC_MC_APB2LPENCLRR_ADFSDMLPEN		BIT(21)
+#define RCC_MC_APB2LPENCLRR_FDCANLPEN		BIT(24)
+
+/* RCC_MC_APB3LPENSETR register fields */
+#define RCC_MC_APB3LPENSETR_LPTIM2LPEN		BIT(0)
+#define RCC_MC_APB3LPENSETR_LPTIM3LPEN		BIT(1)
+#define RCC_MC_APB3LPENSETR_LPTIM4LPEN		BIT(2)
+#define RCC_MC_APB3LPENSETR_LPTIM5LPEN		BIT(3)
+#define RCC_MC_APB3LPENSETR_SAI4LPEN		BIT(8)
+#define RCC_MC_APB3LPENSETR_SYSCFGLPEN		BIT(11)
+#define RCC_MC_APB3LPENSETR_VREFLPEN		BIT(13)
+#define RCC_MC_APB3LPENSETR_TMPSENSLPEN		BIT(16)
+#define RCC_MC_APB3LPENSETR_PMBCTRLLPEN		BIT(17)
+
+/* RCC_MC_APB3LPENCLRR register fields */
+#define RCC_MC_APB3LPENCLRR_LPTIM2LPEN		BIT(0)
+#define RCC_MC_APB3LPENCLRR_LPTIM3LPEN		BIT(1)
+#define RCC_MC_APB3LPENCLRR_LPTIM4LPEN		BIT(2)
+#define RCC_MC_APB3LPENCLRR_LPTIM5LPEN		BIT(3)
+#define RCC_MC_APB3LPENCLRR_SAI4LPEN		BIT(8)
+#define RCC_MC_APB3LPENCLRR_SYSCFGLPEN		BIT(11)
+#define RCC_MC_APB3LPENCLRR_VREFLPEN		BIT(13)
+#define RCC_MC_APB3LPENCLRR_TMPSENSLPEN		BIT(16)
+#define RCC_MC_APB3LPENCLRR_PMBCTRLLPEN		BIT(17)
+
+/* RCC_MC_AHB2LPENSETR register fields */
+#define RCC_MC_AHB2LPENSETR_DMA1LPEN		BIT(0)
+#define RCC_MC_AHB2LPENSETR_DMA2LPEN		BIT(1)
+#define RCC_MC_AHB2LPENSETR_DMAMUXLPEN		BIT(2)
+#define RCC_MC_AHB2LPENSETR_ADC12LPEN		BIT(5)
+#define RCC_MC_AHB2LPENSETR_USBOLPEN		BIT(8)
+#define RCC_MC_AHB2LPENSETR_SDMMC3LPEN		BIT(16)
+
+/* RCC_MC_AHB2LPENCLRR register fields */
+#define RCC_MC_AHB2LPENCLRR_DMA1LPEN		BIT(0)
+#define RCC_MC_AHB2LPENCLRR_DMA2LPEN		BIT(1)
+#define RCC_MC_AHB2LPENCLRR_DMAMUXLPEN		BIT(2)
+#define RCC_MC_AHB2LPENCLRR_ADC12LPEN		BIT(5)
+#define RCC_MC_AHB2LPENCLRR_USBOLPEN		BIT(8)
+#define RCC_MC_AHB2LPENCLRR_SDMMC3LPEN		BIT(16)
+
+/* RCC_MC_AHB3LPENSETR register fields */
+#define RCC_MC_AHB3LPENSETR_DCMILPEN		BIT(0)
+#define RCC_MC_AHB3LPENSETR_CRYP2LPEN		BIT(4)
+#define RCC_MC_AHB3LPENSETR_HASH2LPEN		BIT(5)
+#define RCC_MC_AHB3LPENSETR_RNG2LPEN		BIT(6)
+#define RCC_MC_AHB3LPENSETR_CRC2LPEN		BIT(7)
+#define RCC_MC_AHB3LPENSETR_HSEMLPEN		BIT(11)
+#define RCC_MC_AHB3LPENSETR_IPCCLPEN		BIT(12)
+
+/* RCC_MC_AHB3LPENCLRR register fields */
+#define RCC_MC_AHB3LPENCLRR_DCMILPEN		BIT(0)
+#define RCC_MC_AHB3LPENCLRR_CRYP2LPEN		BIT(4)
+#define RCC_MC_AHB3LPENCLRR_HASH2LPEN		BIT(5)
+#define RCC_MC_AHB3LPENCLRR_RNG2LPEN		BIT(6)
+#define RCC_MC_AHB3LPENCLRR_CRC2LPEN		BIT(7)
+#define RCC_MC_AHB3LPENCLRR_HSEMLPEN		BIT(11)
+#define RCC_MC_AHB3LPENCLRR_IPCCLPEN		BIT(12)
+
+/* RCC_MC_AHB4LPENSETR register fields */
+#define RCC_MC_AHB4LPENSETR_GPIOALPEN		BIT(0)
+#define RCC_MC_AHB4LPENSETR_GPIOBLPEN		BIT(1)
+#define RCC_MC_AHB4LPENSETR_GPIOCLPEN		BIT(2)
+#define RCC_MC_AHB4LPENSETR_GPIODLPEN		BIT(3)
+#define RCC_MC_AHB4LPENSETR_GPIOELPEN		BIT(4)
+#define RCC_MC_AHB4LPENSETR_GPIOFLPEN		BIT(5)
+#define RCC_MC_AHB4LPENSETR_GPIOGLPEN		BIT(6)
+#define RCC_MC_AHB4LPENSETR_GPIOHLPEN		BIT(7)
+#define RCC_MC_AHB4LPENSETR_GPIOILPEN		BIT(8)
+#define RCC_MC_AHB4LPENSETR_GPIOJLPEN		BIT(9)
+#define RCC_MC_AHB4LPENSETR_GPIOKLPEN		BIT(10)
+
+/* RCC_MC_AHB4LPENCLRR register fields */
+#define RCC_MC_AHB4LPENCLRR_GPIOALPEN		BIT(0)
+#define RCC_MC_AHB4LPENCLRR_GPIOBLPEN		BIT(1)
+#define RCC_MC_AHB4LPENCLRR_GPIOCLPEN		BIT(2)
+#define RCC_MC_AHB4LPENCLRR_GPIODLPEN		BIT(3)
+#define RCC_MC_AHB4LPENCLRR_GPIOELPEN		BIT(4)
+#define RCC_MC_AHB4LPENCLRR_GPIOFLPEN		BIT(5)
+#define RCC_MC_AHB4LPENCLRR_GPIOGLPEN		BIT(6)
+#define RCC_MC_AHB4LPENCLRR_GPIOHLPEN		BIT(7)
+#define RCC_MC_AHB4LPENCLRR_GPIOILPEN		BIT(8)
+#define RCC_MC_AHB4LPENCLRR_GPIOJLPEN		BIT(9)
+#define RCC_MC_AHB4LPENCLRR_GPIOKLPEN		BIT(10)
+
+/* RCC_MC_AXIMLPENSETR register fields */
+#define RCC_MC_AXIMLPENSETR_SYSRAMLPEN		BIT(0)
+
+/* RCC_MC_AXIMLPENCLRR register fields */
+#define RCC_MC_AXIMLPENCLRR_SYSRAMLPEN		BIT(0)
+
+/* RCC_MC_MLAHBLPENSETR register fields */
+#define RCC_MC_MLAHBLPENSETR_SRAM1LPEN		BIT(0)
+#define RCC_MC_MLAHBLPENSETR_SRAM2LPEN		BIT(1)
+#define RCC_MC_MLAHBLPENSETR_SRAM34LPEN		BIT(2)
+#define RCC_MC_MLAHBLPENSETR_RETRAMLPEN		BIT(4)
+
+/* RCC_MC_MLAHBLPENCLRR register fields */
+#define RCC_MC_MLAHBLPENCLRR_SRAM1LPEN		BIT(0)
+#define RCC_MC_MLAHBLPENCLRR_SRAM2LPEN		BIT(1)
+#define RCC_MC_MLAHBLPENCLRR_SRAM34LPEN		BIT(2)
+#define RCC_MC_MLAHBLPENCLRR_RETRAMLPEN		BIT(4)
+
+/* RCC_MC_RSTSCLRR register fields */
+#define RCC_MC_RSTSCLRR_PORRSTF			BIT(0)
+#define RCC_MC_RSTSCLRR_BORRSTF			BIT(1)
+#define RCC_MC_RSTSCLRR_PADRSTF			BIT(2)
+#define RCC_MC_RSTSCLRR_HCSSRSTF		BIT(3)
+#define RCC_MC_RSTSCLRR_VCORERSTF		BIT(4)
+#define RCC_MC_RSTSCLRR_MCURSTF			BIT(5)
+#define RCC_MC_RSTSCLRR_MPSYSRSTF		BIT(6)
+#define RCC_MC_RSTSCLRR_MCSYSRSTF		BIT(7)
+#define RCC_MC_RSTSCLRR_IWDG1RSTF		BIT(8)
+#define RCC_MC_RSTSCLRR_IWDG2RSTF		BIT(9)
+#define RCC_MC_RSTSCLRR_WWDG1RSTF		BIT(10)
+
+/* RCC_MC_CIER register fields */
+#define RCC_MC_CIER_LSIRDYIE			BIT(0)
+#define RCC_MC_CIER_LSERDYIE			BIT(1)
+#define RCC_MC_CIER_HSIRDYIE			BIT(2)
+#define RCC_MC_CIER_HSERDYIE			BIT(3)
+#define RCC_MC_CIER_CSIRDYIE			BIT(4)
+#define RCC_MC_CIER_PLL1DYIE			BIT(8)
+#define RCC_MC_CIER_PLL2DYIE			BIT(9)
+#define RCC_MC_CIER_PLL3DYIE			BIT(10)
+#define RCC_MC_CIER_PLL4DYIE			BIT(11)
+#define RCC_MC_CIER_LSECSSIE			BIT(16)
+#define RCC_MC_CIER_WKUPIE			BIT(20)
+
+/* RCC_MC_CIFR register fields */
+#define RCC_MC_CIFR_LSIRDYF			BIT(0)
+#define RCC_MC_CIFR_LSERDYF			BIT(1)
+#define RCC_MC_CIFR_HSIRDYF			BIT(2)
+#define RCC_MC_CIFR_HSERDYF			BIT(3)
+#define RCC_MC_CIFR_CSIRDYF			BIT(4)
+#define RCC_MC_CIFR_PLL1DYF			BIT(8)
+#define RCC_MC_CIFR_PLL2DYF			BIT(9)
+#define RCC_MC_CIFR_PLL3DYF			BIT(10)
+#define RCC_MC_CIFR_PLL4DYF			BIT(11)
+#define RCC_MC_CIFR_LSECSSF			BIT(16)
+#define RCC_MC_CIFR_WKUPF			BIT(20)
+
+/* RCC_VERR register fields */
+#define RCC_VERR_MINREV_MASK			GENMASK(3, 0)
+#define RCC_VERR_MINREV_SHIFT			0
+#define RCC_VERR_MAJREV_MASK			GENMASK(7, 4)
+#define RCC_VERR_MAJREV_SHIFT			4
+
+/* Used for RCC_OCENSETR and RCC_OCENCLRR registers */
+#define RCC_OCENR_HSION				BIT(0)
+#define RCC_OCENR_HSIKERON			BIT(1)
+#define RCC_OCENR_CSION				BIT(4)
+#define RCC_OCENR_CSIKERON			BIT(5)
+#define RCC_OCENR_DIGBYP			BIT(7)
+#define RCC_OCENR_HSEON				BIT(8)
+#define RCC_OCENR_HSEKERON			BIT(9)
+#define RCC_OCENR_HSEBYP			BIT(10)
+#define RCC_OCENR_HSECSSON			BIT(11)
+
+/* Offset between RCC_MP_xxxENSETR and RCC_MP_xxxENCLRR registers */
+#define RCC_MP_ENCLRR_OFFSET			U(4)
+
+/* Offset between RCC_xxxRSTSETR and RCC_xxxRSTCLRR registers */
+#define RCC_RSTCLRR_OFFSET			U(4)
+
+/* Used for most of DIVR register: max div for RTC */
+#define RCC_DIVR_DIV_MASK			GENMASK(5, 0)
+#define RCC_DIVR_DIVRDY				BIT(31)
+
+/* Masks for specific DIVR registers */
+#define RCC_APBXDIV_MASK			GENMASK(2, 0)
+#define RCC_MPUDIV_MASK				GENMASK(2, 0)
+#define RCC_AXIDIV_MASK				GENMASK(2, 0)
+#define RCC_MCUDIV_MASK				GENMASK(3, 0)
+
+/* Used for most of RCC_<x>SELR registers */
+#define RCC_SELR_SRC_MASK			GENMASK(2, 0)
+#define RCC_SELR_REFCLK_SRC_MASK		GENMASK(1, 0)
+#define RCC_SELR_SRCRDY				BIT(31)
+
+/* Used for all RCC_PLL<n>CR registers */
+#define RCC_PLLNCR_PLLON			BIT(0)
+#define RCC_PLLNCR_PLLRDY			BIT(1)
+#define RCC_PLLNCR_SSCG_CTRL			BIT(2)
+#define RCC_PLLNCR_DIVPEN			BIT(4)
+#define RCC_PLLNCR_DIVQEN			BIT(5)
+#define RCC_PLLNCR_DIVREN			BIT(6)
+#define RCC_PLLNCR_DIVEN_SHIFT			4
+
+/* Used for all RCC_PLL<n>CFGR1 registers */
+#define RCC_PLLNCFGR1_DIVM_MASK			GENMASK(21, 16)
+#define RCC_PLLNCFGR1_DIVM_SHIFT		16
+#define RCC_PLLNCFGR1_DIVN_MASK			GENMASK(8, 0)
+#define RCC_PLLNCFGR1_DIVN_SHIFT		0
+
+/* Only for PLL3 and PLL4 */
+#define RCC_PLLNCFGR1_IFRGE_MASK		GENMASK(25, 24)
+#define RCC_PLLNCFGR1_IFRGE_SHIFT		24
+
+/* Used for all RCC_PLL<n>CFGR2 registers */
+#define RCC_PLLNCFGR2_DIVX_MASK			GENMASK(6, 0)
+#define RCC_PLLNCFGR2_DIVP_MASK			GENMASK(6, 0)
+#define RCC_PLLNCFGR2_DIVP_SHIFT		0
+#define RCC_PLLNCFGR2_DIVQ_MASK			GENMASK(14, 8)
+#define RCC_PLLNCFGR2_DIVQ_SHIFT		8
+#define RCC_PLLNCFGR2_DIVR_MASK			GENMASK(22, 16)
+#define RCC_PLLNCFGR2_DIVR_SHIFT		16
+
+/* Used for all RCC_PLL<n>FRACR registers */
+#define RCC_PLLNFRACR_FRACV_SHIFT		3
+#define RCC_PLLNFRACR_FRACV_MASK		GENMASK(15, 3)
+#define RCC_PLLNFRACR_FRACLE			BIT(16)
+
+/* Used for all RCC_PLL<n>CSGR registers */
+#define RCC_PLLNCSGR_INC_STEP_SHIFT		16
+#define RCC_PLLNCSGR_INC_STEP_MASK		GENMASK(30, 16)
+#define RCC_PLLNCSGR_MOD_PER_SHIFT		0
+#define RCC_PLLNCSGR_MOD_PER_MASK		GENMASK(12, 0)
+#define RCC_PLLNCSGR_SSCG_MODE_SHIFT		15
+#define RCC_PLLNCSGR_SSCG_MODE_MASK		BIT(15)
+
+/* Used for TIMER Prescaler */
+#define RCC_TIMGXPRER_TIMGXPRE			BIT(0)
+
+/* Used for RCC_MCO related operations */
+#define RCC_MCOCFG_MCOON			BIT(12)
+#define RCC_MCOCFG_MCODIV_MASK			GENMASK(7, 4)
+#define RCC_MCOCFG_MCODIV_SHIFT			4
+#define RCC_MCOCFG_MCOSRC_MASK			GENMASK(2, 0)
+
 #endif /* STM32MP1_RCC_H */
diff --git a/include/lib/cpus/aarch64/cortex_a710.h b/include/lib/cpus/aarch64/cortex_a710.h
index 8b011aa..19394ba 100644
--- a/include/lib/cpus/aarch64/cortex_a710.h
+++ b/include/lib/cpus/aarch64/cortex_a710.h
@@ -13,7 +13,7 @@
  * CPU Extended Control register specific definitions
  ******************************************************************************/
 #define CORTEX_A710_CPUECTLR_EL1				S3_0_C15_C1_4
-#define CORTEX_A710_CPUECTLR_EL1_PFSTIDIS_BIT                   (ULL(1) << 8)
+#define CORTEX_A710_CPUECTLR_EL1_PFSTIDIS_BIT			(ULL(1) << 8)
 
 /*******************************************************************************
  * CPU Power Control register specific definitions
@@ -25,6 +25,12 @@
  * CPU Auxiliary Control register specific definitions.
  ******************************************************************************/
 #define CORTEX_A710_CPUACTLR_EL1 				S3_0_C15_C1_0
-#define CORTEX_A710_CPUACTLR_EL1_BIT_46 			(ULL(1) << 46)
+#define CORTEX_A710_CPUACTLR_EL1_BIT_46			(ULL(1) << 46)
+
+/*******************************************************************************
+ * CPU Auxiliary Control register specific definitions.
+ ******************************************************************************/
+#define CORTEX_A710_CPUACTLR5_EL1				S3_0_C15_C8_0
+#define CORTEX_A710_CPUACTLR5_EL1_BIT_13			(ULL(1) << 13)
 
 #endif /* CORTEX_A710_H */
diff --git a/include/lib/cpus/aarch64/cortex_hayes.h b/include/lib/cpus/aarch64/cortex_hayes.h
new file mode 100644
index 0000000..82022e9
--- /dev/null
+++ b/include/lib/cpus/aarch64/cortex_hayes.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2021, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef CORTEX_HAYES_H
+#define CORTEX_HAYES_H
+
+#define CORTEX_HAYES_MIDR					U(0x410FD800)
+
+/*******************************************************************************
+ * CPU Extended Control register specific definitions
+ ******************************************************************************/
+#define CORTEX_HAYES_CPUECTLR_EL1				S3_0_C15_C1_4
+
+/*******************************************************************************
+ * CPU Power Control register specific definitions
+ ******************************************************************************/
+#define CORTEX_HAYES_CPUPWRCTLR_EL1				S3_0_C15_C2_7
+#define CORTEX_HAYES_CPUPWRCTLR_EL1_CORE_PWRDN_BIT		U(1)
+
+#endif /* CORTEX_HAYES_H */
diff --git a/include/lib/el3_runtime/aarch64/context.h b/include/lib/el3_runtime/aarch64/context.h
index d449a65..c3f4117 100644
--- a/include/lib/el3_runtime/aarch64/context.h
+++ b/include/lib/el3_runtime/aarch64/context.h
@@ -228,6 +228,10 @@
 
 // Starting with Armv8.5
 #define CTX_SCXTNUM_EL2		U(0x1e0)
+
+// Register for FEAT_HCX
+#define CTX_HCRX_EL2            U(0x1e8)
+
 /* Align to the next 16 byte boundary */
 #define CTX_EL2_SYSREGS_END	U(0x1f0)
 
diff --git a/include/lib/xlat_mpu/xlat_mpu.h b/include/lib/xlat_mpu/xlat_mpu.h
new file mode 100644
index 0000000..252b92c
--- /dev/null
+++ b/include/lib/xlat_mpu/xlat_mpu.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef XLAT_MPU_H
+#define XLAT_MPU_H
+
+#ifndef __ASSEMBLER__
+
+#include <lib/cassert.h>
+
+#define XLAT_TABLES_LIB_V2	1
+
+void enable_mpu_el2(unsigned int flags);
+void enable_mpu_direct_el2(unsigned int flags);
+
+/*
+ * Function to wipe clean and disable all MPU regions.  This function expects
+ * that the MPU has already been turned off, and caching concerns addressed,
+ * but it nevertheless also explicitly turns off the MPU.
+ */
+void clear_all_mpu_regions(void);
+
+#endif /* __ASSEMBLER__ */
+#endif /* XLAT_MPU_H */
diff --git a/include/plat/arm/board/common/v2m_def.h b/include/plat/arm/board/common/v2m_def.h
index 6a6979c..cb11dac 100644
--- a/include/plat/arm/board/common/v2m_def.h
+++ b/include/plat/arm/board/common/v2m_def.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2021, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -8,6 +8,13 @@
 
 #include <lib/utils_def.h>
 
+/* Base address of all V2M */
+#ifdef PLAT_V2M_OFFSET
+#define V2M_OFFSET			PLAT_V2M_OFFSET
+#else
+#define V2M_OFFSET			UL(0)
+#endif
+
 /* V2M motherboard system registers & offsets */
 #define V2M_SYSREGS_BASE		UL(0x1c010000)
 #define V2M_SYS_ID			UL(0x0)
@@ -69,18 +76,18 @@
 
 
 /* NOR Flash */
-#define V2M_FLASH0_BASE			UL(0x08000000)
+#define V2M_FLASH0_BASE			(V2M_OFFSET + UL(0x08000000))
 #define V2M_FLASH0_SIZE			UL(0x04000000)
-#define V2M_FLASH_BLOCK_SIZE		UL(0x00040000)	/* 256 KB */
+#define V2M_FLASH_BLOCK_SIZE		UL(0x00040000) /* 256 KB */
 
-#define V2M_IOFPGA_BASE			UL(0x1c000000)
+#define V2M_IOFPGA_BASE			(V2M_OFFSET + UL(0x1c000000))
 #define V2M_IOFPGA_SIZE			UL(0x03000000)
 
 /* PL011 UART related constants */
-#define V2M_IOFPGA_UART0_BASE		UL(0x1c090000)
-#define V2M_IOFPGA_UART1_BASE		UL(0x1c0a0000)
-#define V2M_IOFPGA_UART2_BASE		UL(0x1c0b0000)
-#define V2M_IOFPGA_UART3_BASE		UL(0x1c0c0000)
+#define V2M_IOFPGA_UART0_BASE		(V2M_OFFSET + UL(0x1c090000))
+#define V2M_IOFPGA_UART1_BASE		(V2M_OFFSET + UL(0x1c0a0000))
+#define V2M_IOFPGA_UART2_BASE		(V2M_OFFSET + UL(0x1c0b0000))
+#define V2M_IOFPGA_UART3_BASE		(V2M_OFFSET + UL(0x1c0c0000))
 
 #define V2M_IOFPGA_UART0_CLK_IN_HZ	24000000
 #define V2M_IOFPGA_UART1_CLK_IN_HZ	24000000
@@ -88,11 +95,11 @@
 #define V2M_IOFPGA_UART3_CLK_IN_HZ	24000000
 
 /* SP804 timer related constants */
-#define V2M_SP804_TIMER0_BASE		UL(0x1C110000)
-#define V2M_SP804_TIMER1_BASE		UL(0x1C120000)
+#define V2M_SP804_TIMER0_BASE		(V2M_OFFSET + UL(0x1C110000))
+#define V2M_SP804_TIMER1_BASE		(V2M_OFFSET + UL(0x1C120000))
 
 /* SP810 controller */
-#define V2M_SP810_BASE			UL(0x1c020000)
+#define V2M_SP810_BASE			(V2M_OFFSET + UL(0x1c020000))
 #define V2M_SP810_CTRL_TIM0_SEL		BIT_32(15)
 #define V2M_SP810_CTRL_TIM1_SEL		BIT_32(17)
 #define V2M_SP810_CTRL_TIM2_SEL		BIT_32(19)
diff --git a/include/plat/arm/board/fvp_r/fvp_r_bl1.h b/include/plat/arm/board/fvp_r/fvp_r_bl1.h
new file mode 100644
index 0000000..0b41e67
--- /dev/null
+++ b/include/plat/arm/board/fvp_r/fvp_r_bl1.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef FVP_R_BL1_H
+#define FVP_R_BL1_H
+
+void bl1_load_bl33(void);
+void bl1_transfer_bl33(void);
+
+#endif /* FVP_R_BL1_H */
diff --git a/include/plat/arm/common/arm_def.h b/include/plat/arm/common/arm_def.h
index ae80628..7cc215f 100644
--- a/include/plat/arm/common/arm_def.h
+++ b/include/plat/arm/common/arm_def.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2021, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -58,8 +58,12 @@
 #define ARM_TRUSTED_DRAM_ID		1
 #define ARM_DRAM_ID			2
 
-/* The first 4KB of Trusted SRAM are used as shared memory */
+#ifdef PLAT_ARM_TRUSTED_SRAM_BASE
+#define ARM_TRUSTED_SRAM_BASE		PLAT_ARM_TRUSTED_SRAM_BASE
+#else
 #define ARM_TRUSTED_SRAM_BASE		UL(0x04000000)
+#endif /* PLAT_ARM_TRUSTED_SRAM_BASE */
+
 #define ARM_SHARED_RAM_BASE		ARM_TRUSTED_SRAM_BASE
 #define ARM_SHARED_RAM_SIZE		UL(0x00001000)	/* 4 KB */
 
@@ -149,8 +153,12 @@
 					 ARM_TZC_DRAM1_SIZE)
 #define ARM_NS_DRAM1_END		(ARM_NS_DRAM1_BASE +		\
 					 ARM_NS_DRAM1_SIZE - 1U)
-
+#ifdef PLAT_ARM_DRAM1_BASE
+#define ARM_DRAM1_BASE			PLAT_ARM_DRAM1_BASE
+#else
 #define ARM_DRAM1_BASE			ULL(0x80000000)
+#endif /* PLAT_ARM_DRAM1_BASE */
+
 #define ARM_DRAM1_SIZE			ULL(0x80000000)
 #define ARM_DRAM1_END			(ARM_DRAM1_BASE +		\
 					 ARM_DRAM1_SIZE - 1U)
@@ -312,16 +320,44 @@
 					 ARM_BL_REGIONS)
 
 /* Memory mapped Generic timer interfaces  */
+#ifdef PLAT_ARM_SYS_CNTCTL_BASE
+#define ARM_SYS_CNTCTL_BASE		PLAT_ARM_SYS_CNTCTL_BASE
+#else
 #define ARM_SYS_CNTCTL_BASE		UL(0x2a430000)
+#endif
+
+#ifdef PLAT_ARM_SYS_CNTREAD_BASE
+#define ARM_SYS_CNTREAD_BASE		PLAT_ARM_SYS_CNTREAD_BASE
+#else
 #define ARM_SYS_CNTREAD_BASE		UL(0x2a800000)
+#endif
+
+#ifdef PLAT_ARM_SYS_TIMCTL_BASE
+#define ARM_SYS_TIMCTL_BASE		PLAT_ARM_SYS_TIMCTL_BASE
+#else
 #define ARM_SYS_TIMCTL_BASE		UL(0x2a810000)
+#endif
+
+#ifdef PLAT_ARM_SYS_CNT_BASE_S
+#define ARM_SYS_CNT_BASE_S		PLAT_ARM_SYS_CNT_BASE_S
+#else
 #define ARM_SYS_CNT_BASE_S		UL(0x2a820000)
+#endif
+
+#ifdef PLAT_ARM_SYS_CNT_BASE_NS
+#define ARM_SYS_CNT_BASE_NS		PLAT_ARM_SYS_CNT_BASE_NS
+#else
 #define ARM_SYS_CNT_BASE_NS		UL(0x2a830000)
+#endif
 
 #define ARM_CONSOLE_BAUDRATE		115200
 
 /* Trusted Watchdog constants */
+#ifdef PLAT_ARM_SP805_TWDG_BASE
+#define ARM_SP805_TWDG_BASE		PLAT_ARM_SP805_TWDG_BASE
+#else
 #define ARM_SP805_TWDG_BASE		UL(0x2a490000)
+#endif
 #define ARM_SP805_TWDG_CLK_HZ		32768
 /* The TBBR document specifies a watchdog timeout of 256 seconds. SP805
  * asserts reset after two consecutive countdowns (2 x 128 = 256 sec) */
@@ -379,9 +415,14 @@
  * addresses.
  ******************************************************************************/
 #define BL1_RO_BASE			PLAT_ARM_TRUSTED_ROM_BASE
+#ifdef PLAT_BL1_RO_LIMIT
+#define BL1_RO_LIMIT			PLAT_BL1_RO_LIMIT
+#else
 #define BL1_RO_LIMIT			(PLAT_ARM_TRUSTED_ROM_BASE	\
 					 + (PLAT_ARM_TRUSTED_ROM_SIZE - \
 					    PLAT_ARM_MAX_ROMLIB_RO_SIZE))
+#endif
+
 /*
  * Put BL1 RW at the top of the Trusted SRAM.
  */
diff --git a/include/services/ffa_svc.h b/include/services/ffa_svc.h
index ab36d9e..85ff703 100644
--- a/include/services/ffa_svc.h
+++ b/include/services/ffa_svc.h
@@ -128,6 +128,16 @@
 #define FFA_MEM_RETRIEVE_RESP	FFA_FID(SMC_32, FFA_FNUM_MEM_RETRIEVE_RESP)
 #define FFA_MEM_RELINQUISH	FFA_FID(SMC_32, FFA_FNUM_MEM_RELINQUISH)
 #define FFA_MEM_RECLAIM	FFA_FID(SMC_32, FFA_FNUM_MEM_RECLAIM)
+#define FFA_NOTIFICATION_BITMAP_CREATE	\
+	FFA_FID(SMC_32, FFA_FNUM_NOTIFICATION_BITMAP_CREATE)
+#define FFA_NOTIFICATION_BITMAP_DESTROY	\
+	FFA_FID(SMC_32, FFA_FNUM_NOTIFICATION_BITMAP_DESTROY)
+#define FFA_NOTIFICATION_BIND	FFA_FID(SMC_32, FFA_FNUM_NOTIFICATION_BIND)
+#define FFA_NOTIFICATION_UNBIND FFA_FID(SMC_32, FFA_FNUM_NOTIFICATION_UNBIND)
+#define FFA_NOTIFICATION_SET 	FFA_FID(SMC_32, FFA_FNUM_NOTIFICATION_SET)
+#define FFA_NOTIFICATION_GET 	FFA_FID(SMC_32, FFA_FNUM_NOTIFICATION_GET)
+#define FFA_NOTIFICATION_INFO_GET \
+	FFA_FID(SMC_32, FFA_FNUM_NOTIFICATION_INFO_GET)
 #define FFA_SPM_ID_GET		FFA_FID(SMC_32, FFA_FNUM_SPM_ID_GET)
 
 /* FFA SMC64 FIDs */
@@ -145,6 +155,8 @@
 	FFA_FID(SMC_64, FFA_FNUM_MEM_RETRIEVE_REQ)
 #define FFA_SECONDARY_EP_REGISTER_SMC64 \
 	FFA_FID(SMC_64, FFA_FNUM_SECONDARY_EP_REGISTER)
+#define FFA_NOTIFICATION_INFO_GET_SMC64 \
+	FFA_FID(SMC_64, FFA_FNUM_NOTIFICATION_INFO_GET)
 
 /*
  * Reserve a special value for traffic targeted to the Hypervisor or SPM.
diff --git a/lib/cpus/aarch64/cortex_a710.S b/lib/cpus/aarch64/cortex_a710.S
index 75b7647..f6a4209 100644
--- a/lib/cpus/aarch64/cortex_a710.S
+++ b/lib/cpus/aarch64/cortex_a710.S
@@ -160,6 +160,34 @@
 	b       cpu_rev_var_ls
 endfunc check_errata_2017096
 
+
+/* ---------------------------------------------------------------------
+ * Errata Workaround for Cortex-A710 Erratum 2083908.
+ * This applies to revision r2p0 of Cortex-A710 and is still open.
+ * Inputs:
+ * x0: variant[4:7] and revision[0:3] of current cpu.
+ * Shall clobber: x0-x17
+ * ---------------------------------------------------------------------
+ */
+func errata_a710_2083908_wa
+	/* Compare x0 against revision r2p0 */
+	mov	x17, x30
+	bl	check_errata_2083908
+	cbz	x0, 1f
+	mrs	x1, CORTEX_A710_CPUACTLR5_EL1
+	orr	x1, x1, CORTEX_A710_CPUACTLR5_EL1_BIT_13
+	msr	CORTEX_A710_CPUACTLR5_EL1, x1
+1:
+	ret	x17
+endfunc errata_a710_2083908_wa
+
+func check_errata_2083908
+	/* Applies to r2p0 */
+	mov	x1, #CPU_REV(2, 0)
+	mov	x2, #CPU_REV(2, 0)
+	b	cpu_rev_var_range
+endfunc check_errata_2083908
+
 	/* ----------------------------------------------------
 	 * HW will do the cache maintenance while powering down
 	 * ----------------------------------------------------
@@ -194,6 +222,7 @@
 	report_errata ERRATA_A710_2081180, cortex_a710, 2081180
 	report_errata ERRATA_A710_2055002, cortex_a710, 2055002
 	report_errata ERRATA_A710_2017096, cortex_a710, 2017096
+	report_errata ERRATA_A710_2083908, cortex_a710, 2083908
 
 	ldp	x8, x30, [sp], #16
 	ret
@@ -225,8 +254,13 @@
 #endif
 
 #if ERRATA_A710_2017096
-	mov     x0, x18
-	bl      errata_a710_2017096_wa
+	mov	x0, x18
+	bl	errata_a710_2017096_wa
+#endif
+
+#if ERRATA_A710_2083908
+	mov	x0, x18
+	bl	errata_a710_2083908_wa
 #endif
 	isb
 	ret	x19
diff --git a/lib/cpus/aarch64/cortex_hayes.S b/lib/cpus/aarch64/cortex_hayes.S
new file mode 100644
index 0000000..445a691
--- /dev/null
+++ b/lib/cpus/aarch64/cortex_hayes.S
@@ -0,0 +1,77 @@
+/*
+ * Copyright (c) 2021, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <common/bl_common.h>
+#include <cortex_hayes.h>
+#include <cpu_macros.S>
+#include <plat_macros.S>
+
+/* Hardware handled coherency */
+#if HW_ASSISTED_COHERENCY == 0
+#error "Cortex Hayes must be compiled with HW_ASSISTED_COHERENCY enabled"
+#endif
+
+/* 64-bit only core */
+#if CTX_INCLUDE_AARCH32_REGS == 1
+#error "Cortex Hayes supports only AArch64. Compile with CTX_INCLUDE_AARCH32_REGS=0"
+#endif
+
+	/* ----------------------------------------------------
+	 * HW will do the cache maintenance while powering down
+	 * ----------------------------------------------------
+	 */
+func cortex_hayes_core_pwr_dwn
+	/* ---------------------------------------------------
+	 * Enable CPU power down bit in power control register
+	 * ---------------------------------------------------
+	 */
+	mrs	x0, CORTEX_HAYES_CPUPWRCTLR_EL1
+	orr	x0, x0, #CORTEX_HAYES_CPUPWRCTLR_EL1_CORE_PWRDN_BIT
+	msr	CORTEX_HAYES_CPUPWRCTLR_EL1, x0
+	isb
+	ret
+endfunc cortex_hayes_core_pwr_dwn
+
+	/*
+	 * Errata printing function for Cortex Hayes. Must follow AAPCS.
+	 */
+#if REPORT_ERRATA
+func cortex_hayes_errata_report
+	ret
+endfunc cortex_hayes_errata_report
+#endif
+
+func cortex_hayes_reset_func
+	/* Disable speculative loads */
+	msr	SSBS, xzr
+	isb
+	ret
+endfunc cortex_hayes_reset_func
+
+	/* ---------------------------------------------
+	 * This function provides Cortex Hayes specific
+	 * register information for crash reporting.
+	 * It needs to return with x6 pointing to
+	 * a list of register names in ascii and
+	 * x8 - x15 having values of registers to be
+	 * reported.
+	 * ---------------------------------------------
+	 */
+.section .rodata.cortex_hayes_regs, "aS"
+cortex_hayes_regs:  /* The ascii list of register names to be reported */
+	.asciz	"cpuectlr_el1", ""
+
+func cortex_hayes_cpu_reg_dump
+	adr	x6, cortex_hayes_regs
+	mrs	x8, CORTEX_HAYES_CPUECTLR_EL1
+	ret
+endfunc cortex_hayes_cpu_reg_dump
+
+declare_cpu_ops cortex_hayes, CORTEX_HAYES_MIDR, \
+	cortex_hayes_reset_func, \
+	cortex_hayes_core_pwr_dwn
diff --git a/lib/cpus/cpu-ops.mk b/lib/cpus/cpu-ops.mk
index 6103a5a..fd34dcb 100644
--- a/lib/cpus/cpu-ops.mk
+++ b/lib/cpus/cpu-ops.mk
@@ -425,6 +425,10 @@
 # to revisions r0p0, r1p0 and r2p0 of the Cortex-A710 cpu and is still open.
 ERRATA_A710_2081180	?=0
 
+# Flag to apply erratum 2083908 workaround during reset. This erratum applies
+# to revision r2p0 of the Cortex-A710 cpu and is still open.
+ERRATA_A710_2083908	?=0
+
 # Flag to apply erratum 2067956 workaround during reset. This erratum applies
 # to revision r0p0 of the Neoverse N2 cpu and is still open.
 ERRATA_N2_2067956	?=0
@@ -806,6 +810,10 @@
 $(eval $(call assert_boolean,ERRATA_A710_2081180))
 $(eval $(call add_define,ERRATA_A710_2081180))
 
+# Process ERRATA_A710_2083908 flag
+$(eval $(call assert_boolean,ERRATA_A710_2083908))
+$(eval $(call add_define,ERRATA_A710_2083908))
+
 # Process ERRATA_N2_2067956 flag
 $(eval $(call assert_boolean,ERRATA_N2_2067956))
 $(eval $(call add_define,ERRATA_N2_2067956))
diff --git a/lib/el3_runtime/aarch64/context.S b/lib/el3_runtime/aarch64/context.S
index 40e7ddf..e270ad0 100644
--- a/lib/el3_runtime/aarch64/context.S
+++ b/lib/el3_runtime/aarch64/context.S
@@ -193,6 +193,11 @@
 	str	x13, [x0, #CTX_SCXTNUM_EL2]
 #endif
 
+#if ENABLE_FEAT_HCX
+	mrs	x14, hcrx_el2
+	str	x14, [x0, #CTX_HCRX_EL2]
+#endif
+
 	ret
 endfunc el2_sysregs_context_save
 
@@ -362,6 +367,11 @@
 	msr	scxtnum_el2, x13
 #endif
 
+#if ENABLE_FEAT_HCX
+	ldr	x14, [x0, #CTX_HCRX_EL2]
+	msr	hcrx_el2, x14
+#endif
+
 	ret
 endfunc el2_sysregs_context_restore
 
diff --git a/lib/el3_runtime/aarch64/context_mgmt.c b/lib/el3_runtime/aarch64/context_mgmt.c
index 52102dd..08022d4 100644
--- a/lib/el3_runtime/aarch64/context_mgmt.c
+++ b/lib/el3_runtime/aarch64/context_mgmt.c
@@ -112,6 +112,14 @@
 	if (EP_GET_ST(ep->h.attr) != 0U)
 		scr_el3 |= SCR_ST_BIT;
 
+	/*
+	 * If FEAT_HCX is enabled, enable access to HCRX_EL2 by setting
+	 * SCR_EL3.HXEn.
+	 */
+#if ENABLE_FEAT_HCX
+	scr_el3 |= SCR_HXEn_BIT;
+#endif
+
 #if RAS_TRAP_LOWER_EL_ERR_ACCESS
 	/*
 	 * SCR_EL3.TERR: Trap Error record accesses. Accesses to the RAS ERR
diff --git a/lib/xlat_mpu/aarch64/enable_mpu.S b/lib/xlat_mpu/aarch64/enable_mpu.S
new file mode 100644
index 0000000..3791f2d
--- /dev/null
+++ b/lib/xlat_mpu/aarch64/enable_mpu.S
@@ -0,0 +1,53 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <asm_macros.S>
+#include <assert_macros.S>
+#include <lib/xlat_tables/xlat_tables_v2.h>
+#include <platform_def.h>
+
+	.global	enable_mpu_direct_el2
+
+	/* void enable_mmu_direct_el2(unsigned int flags) */
+func enable_mpu_direct_el2
+#if ENABLE_ASSERTIONS
+	mrs	x1, sctlr_el2
+	tst	x1, #SCTLR_M_BIT
+	ASM_ASSERT(eq)
+#endif
+	mov	x7, x0
+	adrp	x0, mmu_cfg_params
+	add	x0, x0, :lo12:mmu_cfg_params
+
+	/* (MAIRs are already set up) */
+
+	/* TCR */
+	ldr	x2, [x0, #(MMU_CFG_TCR << 3)]
+	msr	tcr_el2, x2
+
+	/*
+	 * Ensure all translation table writes have drained into memory, the TLB
+	 * invalidation is complete, and translation register writes are
+	 * committed before enabling the MMU
+	 */
+	dsb	ish
+	isb
+
+	/* Set and clear required fields of SCTLR */
+	mrs	x4, sctlr_el2
+	mov_imm	x5, SCTLR_WXN_BIT | SCTLR_C_BIT | SCTLR_M_BIT
+	orr	x4, x4, x5
+
+	/* Additionally, amend SCTLR fields based on flags */
+	bic	x5, x4, #SCTLR_C_BIT
+	tst	x7, #DISABLE_DCACHE
+	csel	x4, x5, x4, ne
+
+	msr	sctlr_el2, x4
+	isb
+
+	ret
+endfunc enable_mpu_direct_el2
diff --git a/lib/xlat_mpu/aarch64/xlat_mpu_arch.c b/lib/xlat_mpu/aarch64/xlat_mpu_arch.c
new file mode 100644
index 0000000..5068eb8
--- /dev/null
+++ b/lib/xlat_mpu/aarch64/xlat_mpu_arch.c
@@ -0,0 +1,69 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <stdbool.h>
+#include <stdint.h>
+
+#include "../xlat_mpu_private.h"
+#include <arch.h>
+#include <arch_features.h>
+#include <lib/cassert.h>
+#include <lib/utils_def.h>
+#include <lib/xlat_tables/xlat_tables_v2.h>
+
+#include <fvp_r_arch_helpers.h>
+
+#warning "xlat_mpu library is currently experimental and its API may change in future."
+
+#if ENABLE_ASSERTIONS
+/*
+ * Return minimum virtual address space size supported by the architecture
+ */
+uintptr_t xlat_get_min_virt_addr_space_size(void)
+{
+	uintptr_t ret;
+
+	if (is_armv8_4_ttst_present()) {
+		ret = MIN_VIRT_ADDR_SPACE_SIZE_TTST;
+	} else {
+		ret = MIN_VIRT_ADDR_SPACE_SIZE;
+	}
+	return ret;
+}
+#endif /* ENABLE_ASSERTIONS*/
+
+bool is_mpu_enabled_ctx(const xlat_ctx_t *ctx)
+{
+	if (ctx->xlat_regime == EL1_EL0_REGIME) {
+		assert(xlat_arch_current_el() >= 1U);
+		return (read_sctlr_el1() & SCTLR_M_BIT) != 0U;
+	} else {
+		assert(xlat_arch_current_el() >= 2U);
+		return (read_sctlr_el2() & SCTLR_M_BIT) != 0U;
+	}
+}
+
+bool is_dcache_enabled(void)
+{
+	unsigned int el = get_current_el();
+
+	if (el == 1U) {
+		return (read_sctlr_el1() & SCTLR_C_BIT) != 0U;
+	} else {  /* must be EL2 */
+		return (read_sctlr_el2() & SCTLR_C_BIT) != 0U;
+	}
+}
+
+unsigned int xlat_arch_current_el(void)
+{
+	unsigned int el = (unsigned int)GET_EL(read_CurrentEl());
+
+	assert(el > 0U);
+
+	return el;
+}
+
diff --git a/lib/xlat_mpu/ro_xlat_mpu.mk b/lib/xlat_mpu/ro_xlat_mpu.mk
new file mode 100644
index 0000000..23f1d46
--- /dev/null
+++ b/lib/xlat_mpu/ro_xlat_mpu.mk
@@ -0,0 +1,14 @@
+#
+# Copyright (c) 2021, ARM Limited. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+ifeq (${USE_DEBUGFS}, 1)
+    $(error "Debugfs requires functionality from the dynamic translation \
+             library and is incompatible with ALLOW_RO_XLAT_TABLES.")
+endif
+
+ifeq (${ARCH},aarch32)
+    $(error "The xlat_mpu library does not currently support AArch32.")
+endif
diff --git a/lib/xlat_mpu/xlat_mpu.mk b/lib/xlat_mpu/xlat_mpu.mk
new file mode 100644
index 0000000..041b91c
--- /dev/null
+++ b/lib/xlat_mpu/xlat_mpu.mk
@@ -0,0 +1,19 @@
+#
+# Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+XLAT_MPU_LIB_V1_SRCS	:=	$(addprefix lib/xlat_mpu/,		\
+				${ARCH}/enable_mpu.S			\
+				${ARCH}/xlat_mpu_arch.c			\
+				xlat_mpu_context.c			\
+				xlat_mpu_core.c				\
+				xlat_mpu_utils.c)
+
+XLAT_MPU_LIB_V1	:=	1
+$(eval $(call add_define,XLAT_MPU_LIB_V1))
+
+ifeq (${ALLOW_XLAT_MPU}, 1)
+    include lib/xlat_mpu_v2/ro_xlat_mpu.mk
+endif
diff --git a/lib/xlat_mpu/xlat_mpu_context.c b/lib/xlat_mpu/xlat_mpu_context.c
new file mode 100644
index 0000000..28c463b
--- /dev/null
+++ b/lib/xlat_mpu/xlat_mpu_context.c
@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <common/debug.h>
+
+#include "lib/xlat_mpu/xlat_mpu.h"
+#include <lib/xlat_tables/xlat_tables_defs.h>
+#include <lib/xlat_tables/xlat_tables_v2.h>
+#include "xlat_mpu_private.h"
+
+#include <fvp_r_arch_helpers.h>
+#include <platform_def.h>
+
+#warning "xlat_mpu library is currently experimental and its API may change in future."
+
+
+/*
+ * MMU configuration register values for the active translation context. Used
+ * from the MMU assembly helpers.
+ */
+uint64_t mmu_cfg_params[MMU_CFG_PARAM_MAX];
+
+/*
+ * Allocate and initialise the default translation context for the BL image
+ * currently executing.
+ */
+REGISTER_XLAT_CONTEXT(tf, MAX_MMAP_REGIONS, MAX_XLAT_TABLES,
+			PLAT_VIRT_ADDR_SPACE_SIZE, PLAT_PHY_ADDR_SPACE_SIZE);
+
+void mmap_add(const mmap_region_t *mm)
+{
+	mmap_add_ctx(&tf_xlat_ctx, mm);
+}
+
+void __init init_xlat_tables(void)
+{
+	assert(tf_xlat_ctx.xlat_regime == EL_REGIME_INVALID);
+
+	unsigned int current_el = xlat_arch_current_el();
+
+	if (current_el == 1U) {
+		tf_xlat_ctx.xlat_regime = EL1_EL0_REGIME;
+	} else {
+		assert(current_el == 2U);
+		tf_xlat_ctx.xlat_regime = EL2_REGIME;
+	}
+	/* Note:  If EL3 is supported in future v8-R64, add EL3 assignment */
+	init_xlat_tables_ctx(&tf_xlat_ctx);
+}
+
+int xlat_get_mem_attributes(uintptr_t base_va, uint32_t *attr)
+{
+	return xlat_get_mem_attributes_ctx(&tf_xlat_ctx, base_va, attr);
+}
+
+void enable_mpu_el2(unsigned int flags)
+{
+	/* EL2 is strictly MPU on v8-R64, so no need for setup_mpu_cfg() */
+	enable_mpu_direct_el2(flags);
+}
diff --git a/lib/xlat_mpu/xlat_mpu_core.c b/lib/xlat_mpu/xlat_mpu_core.c
new file mode 100644
index 0000000..6b4b0c2
--- /dev/null
+++ b/lib/xlat_mpu/xlat_mpu_core.c
@@ -0,0 +1,408 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <errno.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <string.h>
+
+#include <arch_features.h>
+#include <common/debug.h>
+#include <lib/utils_def.h>
+#include <lib/xlat_tables/xlat_tables_defs.h>
+#include <lib/xlat_tables/xlat_tables_v2.h>
+#include "xlat_mpu_private.h"
+
+#include <fvp_r_arch_helpers.h>
+#include <platform_def.h>
+
+#warning "xlat_mpu library is currently experimental and its API may change in future."
+
+
+/* Helper function that cleans the data cache only if it is enabled. */
+static inline __attribute__((unused))
+	void xlat_clean_dcache_range(uintptr_t addr, size_t size)
+{
+	if (is_dcache_enabled()) {
+		clean_dcache_range(addr, size);
+	}
+}
+
+
+
+/* Calculate region-attributes byte for PRBAR part of MPU-region descriptor: */
+uint64_t prbar_attr_value(uint32_t attr)
+{
+	uint64_t retValue = UL(0);
+	uint64_t extract;  /* temp var holding bit extracted from attr */
+
+	/* Extract and stuff SH: */
+	extract = (uint64_t) ((attr >> MT_SHAREABILITY_SHIFT)
+				& MT_SHAREABILITY_MASK);
+	retValue |= (extract << PRBAR_SH_SHIFT);
+
+	/* Extract and stuff AP: */
+	extract = (uint64_t) ((attr >> MT_PERM_SHIFT) & MT_PERM_MASK);
+	if (extract == 0U) {
+		retValue |= (UL(2) << PRBAR_AP_SHIFT);
+	} else /* extract == 1 */ {
+		retValue |= (UL(0) << PRBAR_AP_SHIFT);
+	}
+
+	/* Extract and stuff XN: */
+	extract = (uint64_t) ((attr >> MT_EXECUTE_SHIFT) & MT_EXECUTE_MASK);
+	retValue |= (extract << PRBAR_XN_SHIFT);
+	/* However, also don't execute in peripheral space: */
+	extract = (uint64_t) ((attr >> MT_TYPE_SHIFT) & MT_TYPE_MASK);
+	if (extract == 0U) {
+		retValue |= (UL(1) << PRBAR_XN_SHIFT);
+	}
+	return retValue;
+}
+
+/* Calculate region-attributes byte for PRLAR part of MPU-region descriptor: */
+uint64_t prlar_attr_value(uint32_t attr)
+{
+	uint64_t retValue = UL(0);
+	uint64_t extract;  /* temp var holding bit extracted from attr */
+
+	/* Extract and stuff AttrIndx: */
+	extract = (uint64_t) ((attr >> MT_TYPE_SHIFT)
+				& MT_TYPE_MASK);
+	switch (extract) {
+	case UL(0):
+		retValue |= (UL(1) << PRLAR_ATTR_SHIFT);
+		break;
+	case UL(2):
+		/* 0, so OR in nothing */
+		break;
+	case UL(3):
+		retValue |= (UL(2) << PRLAR_ATTR_SHIFT);
+		break;
+	default:
+		retValue |= (extract << PRLAR_ATTR_SHIFT);
+		break;
+	}
+
+	/* Stuff EN: */
+	retValue |= (UL(1) << PRLAR_EN_SHIFT);
+
+	/* Force NS to 0 (Secure);  v8-R64 only supports Secure: */
+	extract = ~(1U << PRLAR_NS_SHIFT);
+	retValue &= extract;
+
+	return retValue;
+}
+
+/*
+ * Function that writes an MPU "translation" into the MPU registers. If not
+ * possible (e.g., if no more MPU regions available) boot is aborted.
+ */
+static void mpu_map_region(mmap_region_t *mm)
+{
+	uint64_t prenr_el2_value = 0UL;
+	uint64_t prbar_attrs = 0UL;
+	uint64_t prlar_attrs = 0UL;
+	int region_to_use = 0;
+
+	/* If all MPU regions in use, then abort boot: */
+	prenr_el2_value = read_prenr_el2();
+	assert(prenr_el2_value != 0xffffffff);
+
+	/* Find and select first-available MPU region (PRENR has an enable bit
+	 * for each MPU region, 1 for in-use or 0 for unused):
+	 */
+	for (region_to_use = 0;  region_to_use < N_MPU_REGIONS;
+	     region_to_use++) {
+		if (((prenr_el2_value >> region_to_use) & 1) == 0) {
+			break;
+		}
+	}
+	write_prselr_el2((uint64_t) (region_to_use));
+	isb();
+
+	/* Set base and limit addresses: */
+	write_prbar_el2(mm->base_pa & PRBAR_PRLAR_ADDR_MASK);
+	write_prlar_el2((mm->base_pa + mm->size - 1UL)
+			& PRBAR_PRLAR_ADDR_MASK);
+	dsbsy();
+	isb();
+
+	/* Set attributes: */
+	prbar_attrs = prbar_attr_value(mm->attr);
+	write_prbar_el2(read_prbar_el2() | prbar_attrs);
+	prlar_attrs = prlar_attr_value(mm->attr);
+	write_prlar_el2(read_prlar_el2() | prlar_attrs);
+	dsbsy();
+	isb();
+
+	/* Mark this MPU region as used: */
+	prenr_el2_value |= (1 << region_to_use);
+	write_prenr_el2(prenr_el2_value);
+	isb();
+}
+
+/*
+ * Function that verifies that a region can be mapped.
+ * Returns:
+ *        0: Success, the mapping is allowed.
+ *   EINVAL: Invalid values were used as arguments.
+ *   ERANGE: The memory limits were surpassed.
+ *   ENOMEM: There is not enough memory in the mmap array.
+ *    EPERM: Region overlaps another one in an invalid way.
+ */
+static int mmap_add_region_check(const xlat_ctx_t *ctx, const mmap_region_t *mm)
+{
+	unsigned long long base_pa = mm->base_pa;
+	uintptr_t base_va = mm->base_va;
+	size_t size = mm->size;
+
+	unsigned long long end_pa = base_pa + size - 1U;
+	uintptr_t end_va = base_va + size - 1U;
+
+	if (base_pa != base_va) {
+		return -EINVAL;  /* MPU does not perform address translation */
+	}
+	if ((base_pa % 64ULL) != 0ULL) {
+		return -EINVAL;  /* MPU requires 64-byte alignment */
+	}
+	/* Check for overflows */
+	if ((base_pa > end_pa) || (base_va > end_va)) {
+		return -ERANGE;
+	}
+	if (end_pa > ctx->pa_max_address) {
+		return -ERANGE;
+	}
+	/* Check that there is space in the ctx->mmap array */
+	if (ctx->mmap[ctx->mmap_num - 1].size != 0U) {
+		return -ENOMEM;
+	}
+	/* Check for PAs and VAs overlaps with all other regions */
+	for (const mmap_region_t *mm_cursor = ctx->mmap;
+	     mm_cursor->size != 0U; ++mm_cursor) {
+
+		uintptr_t mm_cursor_end_va =
+			mm_cursor->base_va + mm_cursor->size - 1U;
+
+		/*
+		 * Check if one of the regions is completely inside the other
+		 * one.
+		 */
+		bool fully_overlapped_va =
+			((base_va >= mm_cursor->base_va) &&
+					(end_va <= mm_cursor_end_va)) ||
+			((mm_cursor->base_va >= base_va) &&
+						(mm_cursor_end_va <= end_va));
+
+		/*
+		 * Full VA overlaps are only allowed if both regions are
+		 * identity mapped (zero offset) or have the same VA to PA
+		 * offset. Also, make sure that it's not the exact same area.
+		 * This can only be done with static regions.
+		 */
+		if (fully_overlapped_va) {
+
+#if PLAT_XLAT_TABLES_DYNAMIC
+			if (((mm->attr & MT_DYNAMIC) != 0U) ||
+			    ((mm_cursor->attr & MT_DYNAMIC) != 0U)) {
+				return -EPERM;
+			}
+#endif /* PLAT_XLAT_TABLES_DYNAMIC */
+			if ((mm_cursor->base_va - mm_cursor->base_pa)
+					!= (base_va - base_pa)) {
+				return -EPERM;
+			}
+			if ((base_va == mm_cursor->base_va) &&
+					(size == mm_cursor->size)) {
+				return -EPERM;
+			}
+		} else {
+			/*
+			 * If the regions do not have fully overlapping VAs,
+			 * then they must have fully separated VAs and PAs.
+			 * Partial overlaps are not allowed
+			 */
+
+			unsigned long long mm_cursor_end_pa =
+				     mm_cursor->base_pa + mm_cursor->size - 1U;
+
+			bool separated_pa = (end_pa < mm_cursor->base_pa) ||
+				(base_pa > mm_cursor_end_pa);
+			bool separated_va = (end_va < mm_cursor->base_va) ||
+				(base_va > mm_cursor_end_va);
+
+			if (!separated_va || !separated_pa) {
+				return -EPERM;
+			}
+		}
+	}
+
+	return 0;
+}
+
+void mmap_add_region_ctx(xlat_ctx_t *ctx, const mmap_region_t *mm)
+{
+	mmap_region_t *mm_cursor = ctx->mmap, *mm_destination;
+	const mmap_region_t *mm_end = ctx->mmap + ctx->mmap_num;
+	const mmap_region_t *mm_last;
+	unsigned long long end_pa = mm->base_pa + mm->size - 1U;
+	uintptr_t end_va = mm->base_va + mm->size - 1U;
+	int ret;
+
+	/* Ignore empty regions */
+	if (mm->size == 0U) {
+		return;
+	}
+
+	/* Static regions must be added before initializing the xlat tables. */
+	assert(!ctx->initialized);
+
+	ret = mmap_add_region_check(ctx, mm);
+	if (ret != 0) {
+		ERROR("mmap_add_region_check() failed. error %d\n", ret);
+		assert(false);
+		return;
+	}
+
+	/*
+	 * Find the last entry marker in the mmap
+	 */
+	mm_last = ctx->mmap;
+	while ((mm_last->size != 0U) && (mm_last < mm_end)) {
+		++mm_last;
+	}
+
+	/*
+	 * Check if we have enough space in the memory mapping table.
+	 * This shouldn't happen as we have checked in mmap_add_region_check
+	 * that there is free space.
+	 */
+	assert(mm_last->size == 0U);
+
+	/* Make room for new region by moving other regions up by one place */
+	mm_destination = mm_cursor + 1;
+	(void)memmove(mm_destination, mm_cursor,
+		(uintptr_t)mm_last - (uintptr_t)mm_cursor);
+
+	/*
+	 * Check we haven't lost the empty sentinel from the end of the array.
+	 * This shouldn't happen as we have checked in mmap_add_region_check
+	 * that there is free space.
+	 */
+	assert(mm_end->size == 0U);
+
+	*mm_cursor = *mm;
+
+	if (end_pa > ctx->max_pa) {
+		ctx->max_pa = end_pa;
+	}
+	if (end_va > ctx->max_va) {
+		ctx->max_va = end_va;
+	}
+}
+
+void mmap_add_ctx(xlat_ctx_t *ctx, const mmap_region_t *mm)
+{
+	const mmap_region_t *mm_cursor = mm;
+
+	while (mm_cursor->granularity != 0U) {
+		mmap_add_region_ctx(ctx, mm_cursor);
+		mm_cursor++;
+	}
+}
+
+void __init init_xlat_tables_ctx(xlat_ctx_t *ctx)
+{
+	uint64_t mair = UL(0);
+
+	assert(ctx != NULL);
+	assert(!ctx->initialized);
+	assert((ctx->xlat_regime == EL2_REGIME) ||
+		(ctx->xlat_regime == EL1_EL0_REGIME));
+	/* Note:  Add EL3_REGIME if EL3 is supported in future v8-R64 cores. */
+	assert(!is_mpu_enabled_ctx(ctx));
+
+	mmap_region_t *mm = ctx->mmap;
+
+	assert(ctx->va_max_address >=
+		(xlat_get_min_virt_addr_space_size() - 1U));
+	assert(ctx->va_max_address <= (MAX_VIRT_ADDR_SPACE_SIZE - 1U));
+	assert(IS_POWER_OF_TWO(ctx->va_max_address + 1U));
+
+	xlat_mmap_print(mm);
+
+	/* All tables must be zeroed before mapping any region. */
+
+	for (unsigned int i = 0U; i < ctx->base_table_entries; i++)
+		ctx->base_table[i] = INVALID_DESC;
+
+	/* Also mark all MPU regions as invalid in the MPU hardware itself: */
+	write_prenr_el2(0);
+		/* Sufficient for current, max-32-region implementations. */
+	dsbsy();
+	isb();
+	while (mm->size != 0U) {
+		if (read_prenr_el2() == ALL_MPU_EL2_REGIONS_USED) {
+			ERROR("Not enough MPU regions to map region:\n"
+				" VA:0x%lx  PA:0x%llx  size:0x%zx  attr:0x%x\n",
+				mm->base_va, mm->base_pa, mm->size, mm->attr);
+			panic();
+		} else {
+#if !(HW_ASSISTED_COHERENCY || WARMBOOT_ENABLE_DCACHE_EARLY)
+			xlat_clean_dcache_range((uintptr_t)mm->base_va,
+				mm->size);
+#endif
+			mpu_map_region(mm);
+		}
+		mm++;
+	}
+
+	ctx->initialized = true;
+
+	xlat_tables_print(ctx);
+
+	/* Set attributes in the right indices of the MAIR */
+	mair = MAIR_ATTR_SET(ATTR_DEVICE, ATTR_DEVICE_INDEX);
+	mair |= MAIR_ATTR_SET(ATTR_IWBWA_OWBWA_NTR,
+			ATTR_IWBWA_OWBWA_NTR_INDEX);
+	mair |= MAIR_ATTR_SET(ATTR_NON_CACHEABLE,
+			ATTR_NON_CACHEABLE_INDEX);
+	write_mair_el2(mair);
+	dsbsy();
+	isb();
+}
+
+/*
+ * Function to wipe clean and disable all MPU regions.  This function expects
+ * that the MPU has already been turned off, and caching concerns addressed,
+ * but it nevertheless also explicitly turns off the MPU.
+ */
+void clear_all_mpu_regions(void)
+{
+	uint64_t sctlr_el2_value = 0UL;
+	uint64_t region_n = 0UL;
+
+	/*
+	 * MPU should already be disabled, but explicitly disable it
+	 * nevertheless:
+	 */
+	sctlr_el2_value = read_sctlr_el2() & ~(1UL);
+	write_sctlr_el2(sctlr_el2_value);
+
+	/* Disable all regions: */
+	write_prenr_el2(0UL);
+
+	/* Sequence through all regions, zeroing them out and turning off: */
+	for (region_n = 0UL;  region_n < N_MPU_REGIONS;  region_n++) {
+		write_prselr_el2(region_n);
+		isb();
+		write_prbar_el2((uint64_t) 0);
+		write_prlar_el2((uint64_t) 0);
+		dsbsy();
+		isb();
+	}
+}
diff --git a/lib/xlat_mpu/xlat_mpu_private.h b/lib/xlat_mpu/xlat_mpu_private.h
new file mode 100644
index 0000000..e0e479d
--- /dev/null
+++ b/lib/xlat_mpu/xlat_mpu_private.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef XLAT_MPU_PRIVATE_H
+#define XLAT_MPU_PRIVATE_H
+
+#include <stdbool.h>
+
+#include <lib/xlat_tables/xlat_tables_defs.h>
+#include <lib/xlat_tables/xlat_tables_v2.h>
+
+#include <platform_def.h>
+
+#if PLAT_XLAT_TABLES_DYNAMIC
+/*
+ * Private shifts and masks to access fields of an mmap attribute
+ */
+/* Dynamic or static */
+#define MT_DYN_SHIFT		U(31)
+
+/*
+ * Memory mapping private attributes
+ *
+ * Private attributes not exposed in the public header.
+ */
+
+#endif /* PLAT_XLAT_TABLES_DYNAMIC */
+
+/* Calculate region-attributes byte for PRBAR part of MPU-region descriptor: */
+uint64_t prbar_attr_value(uint32_t attr);
+/* Calculate region-attributes byte for PRLAR part of MPU-region descriptor: */
+uint64_t prlar_attr_value(uint32_t attr);
+/* Calculates the attr value for a given PRBAR and PRLAR entry value: */
+uint32_t region_attr(uint64_t prbar_attr, uint64_t prlar_attr);
+
+#define PRBAR_PRLAR_ADDR_MASK	UL(0xffffffffffc0)
+	/* mask for PRBAR & PRLAR MPU-region field */
+/* MPU region attribute bit fields: */
+#define PRBAR_SH_SHIFT		UL(4)
+#define PRBAR_SH_MASK		UL(0x3)
+#define PRBAR_AP_SHIFT		UL(2)
+#define PRBAR_AP_MASK		UL(0x3)
+#define PRBAR_XN_SHIFT		UL(1)
+#define PRBAR_XN_MASK		UL(0x3)
+#define PRLAR_NS_SHIFT		UL(4)
+#define PRLAR_NS_MASK		UL(0x3)
+#define PRBAR_ATTR_SHIFT	UL(0)
+#define PRBAR_ATTR_MASK		UL(0x3f)
+#define PRLAR_ATTR_SHIFT	UL(1)
+#define PRLAR_ATTR_MASK		UL(0x7)
+#define PRLAR_EN_SHIFT		UL(0)
+#define PRLAR_EN_MASK		UL(0x1)
+/* Aspects of the source attributes not defined elsewhere: */
+#define MT_PERM_MASK		UL(0x1)
+#define MT_SEC_MASK		UL(0x1)
+#define MT_EXECUTE_MASK		UL(0x3)
+#define MT_TYPE_SHIFT		UL(0)
+
+extern uint64_t mmu_cfg_params[MMU_CFG_PARAM_MAX];
+
+/*
+ * Return the execute-never mask that will prevent instruction fetch at the
+ * given translation regime.
+ */
+uint64_t xlat_arch_regime_get_xn_desc(int xlat_regime);
+
+/* Print VA, PA, size and attributes of all regions in the mmap array. */
+void xlat_mmap_print(const mmap_region_t *mmap);
+
+/*
+ * Print the current state of the translation tables by reading them from
+ * memory.
+ */
+void xlat_tables_print(xlat_ctx_t *ctx);
+
+/*
+ * Returns a block/page table descriptor for the given level and attributes.
+ */
+uint64_t xlat_desc(const xlat_ctx_t *ctx, uint32_t attr,
+		   unsigned long long addr_pa, unsigned int level);
+
+/*
+ * Architecture-specific initialization code.
+ */
+
+/* Returns the current Exception Level. The returned EL must be 1 or higher. */
+unsigned int xlat_arch_current_el(void);
+
+/*
+ * Returns true if the MMU of the translation regime managed by the given
+ * xlat_ctx_t is enabled, false otherwise.
+ */
+bool is_mpu_enabled_ctx(const xlat_ctx_t *ctx);
+
+/*
+ * Returns minimum virtual address space size supported by the architecture
+ */
+uintptr_t xlat_get_min_virt_addr_space_size(void);
+
+#endif /* XLAT_MPU_PRIVATE_H */
diff --git a/lib/xlat_mpu/xlat_mpu_utils.c b/lib/xlat_mpu/xlat_mpu_utils.c
new file mode 100644
index 0000000..f305632
--- /dev/null
+++ b/lib/xlat_mpu/xlat_mpu_utils.c
@@ -0,0 +1,71 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <errno.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+
+#include <common/debug.h>
+#include <lib/utils_def.h>
+#include <lib/xlat_tables/xlat_tables_defs.h>
+#include <lib/xlat_tables/xlat_tables_v2.h>
+#include "xlat_mpu_private.h"
+
+#include <fvp_r_arch_helpers.h>
+#include <platform_def.h>
+
+#warning "xlat_mpu library is currently experimental and its API may change in future."
+
+
+#if LOG_LEVEL < LOG_LEVEL_VERBOSE
+
+void xlat_mmap_print(__unused const mmap_region_t *mmap)
+{
+	/* Empty */
+}
+
+void xlat_tables_print(__unused xlat_ctx_t *ctx)
+{
+	/* Empty */
+}
+
+#else /* if LOG_LEVEL >= LOG_LEVEL_VERBOSE */
+
+static const char *invalid_descriptors_ommited =
+		"%s(%d invalid descriptors omitted)\n";
+
+void xlat_tables_print(xlat_ctx_t *ctx)
+{
+	const char *xlat_regime_str;
+	int used_page_tables;
+
+	if (ctx->xlat_regime == EL1_EL0_REGIME) {
+		xlat_regime_str = "1&0";
+	} else if (ctx->xlat_regime == EL2_REGIME) {
+		xlat_regime_str = "2";
+	} else {
+		assert(ctx->xlat_regime == EL3_REGIME);
+		xlat_regime_str = "3";
+		/* If no EL3 and EL3 tables generated, then need to know. */
+	}
+	VERBOSE("Translation tables state:\n");
+	VERBOSE("  Xlat regime:     EL%s\n", xlat_regime_str);
+	VERBOSE("  Max allowed PA:  0x%llx\n", ctx->pa_max_address);
+	VERBOSE("  Max allowed VA:  0x%lx\n", ctx->va_max_address);
+	VERBOSE("  Max mapped PA:   0x%llx\n", ctx->max_pa);
+	VERBOSE("  Max mapped VA:   0x%lx\n", ctx->max_va);
+
+	VERBOSE("  Initial lookup level: %u\n", ctx->base_level);
+	VERBOSE("  Entries @initial lookup level: %u\n",
+		ctx->base_table_entries);
+
+	xlat_tables_print_internal(ctx, 0U, ctx->base_table,
+				   ctx->base_table_entries, ctx->base_level);
+}
+
+#endif /* LOG_LEVEL >= LOG_LEVEL_VERBOSE */
diff --git a/lib/xlat_tables/aarch64/xlat_tables.c b/lib/xlat_tables/aarch64/xlat_tables.c
index c86412c..dc167e3 100644
--- a/lib/xlat_tables/aarch64/xlat_tables.c
+++ b/lib/xlat_tables/aarch64/xlat_tables.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2014-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2014-2021, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -147,7 +147,7 @@
  *			exception level
  ******************************************************************************/
 #define DEFINE_ENABLE_MMU_EL(_el, _tcr_extra, _tlbi_fct)		\
-	void enable_mmu_el##_el(unsigned int flags)				\
+	void enable_mmu_el##_el(unsigned int flags)			\
 	{								\
 		uint64_t mair, tcr, ttbr;				\
 		uint32_t sctlr;						\
diff --git a/lib/xlat_tables_v2/aarch32/xlat_tables_arch.c b/lib/xlat_tables_v2/aarch32/xlat_tables_arch.c
index b69c670..a95ef07 100644
--- a/lib/xlat_tables_v2/aarch32/xlat_tables_arch.c
+++ b/lib/xlat_tables_v2/aarch32/xlat_tables_arch.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2017-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2017-2021, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -203,8 +203,6 @@
 
 		assert(virtual_addr_space_size >=
 			xlat_get_min_virt_addr_space_size());
-		assert(virtual_addr_space_size <=
-			MAX_VIRT_ADDR_SPACE_SIZE);
 		assert(IS_POWER_OF_TWO(virtual_addr_space_size));
 
 		/*
diff --git a/make_helpers/defaults.mk b/make_helpers/defaults.mk
index c188621..8b350db 100644
--- a/make_helpers/defaults.mk
+++ b/make_helpers/defaults.mk
@@ -32,6 +32,9 @@
 # Execute BL2 at EL3
 BL2_AT_EL3			:= 0
 
+# Only use SP packages if SP layout JSON is defined
+BL2_ENABLE_SP_LOAD		:= 0
+
 # BL2 image is stored in XIP memory, for now, this option is only supported
 # when BL2_AT_EL3 is 1.
 BL2_IN_XIP_MEM			:= 0
@@ -121,6 +124,9 @@
 # Use BRANCH_PROTECTION to enable PAUTH.
 ENABLE_PAUTH			:= 0
 
+# Flag to enable access to the HCRX_EL2 register by setting SCR_EL3.HXEn.
+ENABLE_FEAT_HCX                 := 0
+
 # By default BL31 encryption disabled
 ENCRYPT_BL31			:= 0
 
diff --git a/make_helpers/tbbr/tbbr_tools.mk b/make_helpers/tbbr/tbbr_tools.mk
index f7cced4..293e854 100644
--- a/make_helpers/tbbr/tbbr_tools.mk
+++ b/make_helpers/tbbr/tbbr_tools.mk
@@ -68,8 +68,10 @@
 
 # Add the BL2 CoT (image cert)
 ifeq (${BL2_AT_EL3}, 0)
+ifneq (${PLAT},fvp_r)
 $(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/tb_fw.crt,--tb-fw-cert))
 endif
+endif
 
 # Add the SCP_BL2 CoT (key cert + img cert)
 ifneq (${SCP_BL2},)
diff --git a/plat/arm/board/arm_fpga/build_axf.ld.S b/plat/arm/board/arm_fpga/build_axf.ld.S
index d7cd008..b4bc7d8 100644
--- a/plat/arm/board/arm_fpga/build_axf.ld.S
+++ b/plat/arm/board/arm_fpga/build_axf.ld.S
@@ -17,6 +17,7 @@
 
 INPUT(./bl31/bl31.elf)
 INPUT(./rom_trampoline.o)
+INPUT(./kernel_trampoline.o)
 
 TARGET(binary)
 INPUT(./fdts/arm_fpga.dtb)
@@ -33,7 +34,6 @@
 	.bl31 (BL31_BASE): {
 		ASSERT(. == ALIGN(PAGE_SIZE), "BL31_BASE is not page aligned");
 		*bl31.elf(.text* .data* .rodata* ro* .bss*)
-		*bl31.elf(.stack)
 	}
 
 	.dtb (FPGA_PRELOADED_DTB_BASE): {
@@ -41,6 +41,12 @@
 		*arm_fpga.dtb
 	}
 
+	.kern_tramp (PRELOADED_BL33_BASE): {
+		*kernel_trampoline.o(.text*)
+		KEEP(*(.kern_tramp))
+	}
+
+	/DISCARD/ : { *(stacks) }
 	/DISCARD/ : { *(.debug_*) }
 	/DISCARD/ : { *(.note*) }
 	/DISCARD/ : { *(.comment*) }
diff --git a/plat/arm/board/arm_fpga/kernel_trampoline.S b/plat/arm/board/arm_fpga/kernel_trampoline.S
new file mode 100644
index 0000000..f4c08ef
--- /dev/null
+++ b/plat/arm/board/arm_fpga/kernel_trampoline.S
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2021, ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * The traditional arm64 Linux kernel load address is 512KiB from the
+ * beginning of DRAM, caused by this having been the default value of the
+ * kernel's CONFIG_TEXT_OFFSET Kconfig value.
+ * However kernel version 5.8 changed the default offset (into a 2MB page)
+ * to 0, so TF-A's default assumption is no longer true. Fortunately the
+ * kernel got more relaxed about this offset at the same time, so it
+ * tolerates the wrong offset, but issues a warning:
+ * [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
+ *
+ * We cannot easily change the load address offset in TF-A to be 2MiB, because
+ * this would break older kernels - and they are not as forgiving in this
+ * respect.
+ *
+ * But we can allow users to load the kernel at the right offset, and
+ * offer this trampoline here to transition to this new load address.
+ * Any older kernels, or newer kernels misloaded, will overwrite this code
+ * here, so it does no harm in this case.
+ */
+
+#include <asm_macros.S>
+#include <common/bl_common.ld.h>
+
+.text
+.global _tramp_start
+
+_tramp_start:
+	adr	x4, _tramp_start
+	orr	x4, x4, #0x1fffff
+	add	x4, x4, #1			/* align up to 2MB */
+	br	x4
diff --git a/plat/arm/board/arm_fpga/platform.mk b/plat/arm/board/arm_fpga/platform.mk
index baffbcf..1217425 100644
--- a/plat/arm/board/arm_fpga/platform.mk
+++ b/plat/arm/board/arm_fpga/platform.mk
@@ -118,10 +118,11 @@
 				${FPGA_GIC_SOURCES}
 
 $(eval $(call MAKE_S,$(BUILD_PLAT),plat/arm/board/arm_fpga/rom_trampoline.S,31))
+$(eval $(call MAKE_S,$(BUILD_PLAT),plat/arm/board/arm_fpga/kernel_trampoline.S,31))
 $(eval $(call MAKE_LD,$(BUILD_PLAT)/build_axf.ld,plat/arm/board/arm_fpga/build_axf.ld.S,31))
 
-bl31.axf: bl31 dtbs ${BUILD_PLAT}/rom_trampoline.o ${BUILD_PLAT}/build_axf.ld
+bl31.axf: bl31 dtbs ${BUILD_PLAT}/rom_trampoline.o ${BUILD_PLAT}/kernel_trampoline.o ${BUILD_PLAT}/build_axf.ld
 	$(ECHO) "  LD      $@"
-	$(Q)$(LD) -T ${BUILD_PLAT}/build_axf.ld -L ${BUILD_PLAT} --strip-debug -o ${BUILD_PLAT}/bl31.axf
+	$(Q)$(LD) -T ${BUILD_PLAT}/build_axf.ld -L ${BUILD_PLAT} --strip-debug -s -n -o ${BUILD_PLAT}/bl31.axf
 
 all: bl31.axf
diff --git a/plat/arm/board/fvp/fdts/optee_sp_manifest.dts b/plat/arm/board/fvp/fdts/optee_sp_manifest.dts
index 07235b0..551efe6 100644
--- a/plat/arm/board/fvp/fdts/optee_sp_manifest.dts
+++ b/plat/arm/board/fvp/fdts/optee_sp_manifest.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2020, Arm Limited. All rights reserved.
+ * Copyright (c) 2020-2021, Arm Limited. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  *
@@ -16,7 +16,7 @@
 	/* Properties */
 	description = "op-tee";
 	ffa-version = <0x00010000>; /* 31:16 - Major, 15:0 - Minor */
-	uuid = <0x486178e0 0xe7f811e3 0xbc5e0002 0xa5d5c51b>;
+	uuid = <0xe0786148 0xe311f8e7 0x02005ebc 0x1bc5d5a5>;
 	id = <1>;
 	execution-ctx-count = <8>;
 	exception-level = <2>; /* S-EL1 */
@@ -25,8 +25,9 @@
 	entrypoint-offset = <0x1000>;
 	xlat-granule = <0>; /* 4KiB */
 	boot-order = <0>;
-	messaging-method = <3>; /* Direct messaging only */
-	run-time-model = <1>; /* Run to completion */
+	messaging-method = <0x3>; /* Direct request/response supported. */
+	managed-exit;
+	run-time-model = <1>; /* SP pre-emptible. */
 
 	/* Boot protocol */
 	gp-register-num = <0x0>;
diff --git a/plat/arm/board/fvp/platform.mk b/plat/arm/board/fvp/platform.mk
index 2f8a65e..73f09e5 100644
--- a/plat/arm/board/fvp/platform.mk
+++ b/plat/arm/board/fvp/platform.mk
@@ -138,7 +138,8 @@
 					lib/cpus/aarch64/cortex_demeter.S	\
 					lib/cpus/aarch64/cortex_a65.S		\
 					lib/cpus/aarch64/cortex_a65ae.S		\
-					lib/cpus/aarch64/cortex_a78c.S
+					lib/cpus/aarch64/cortex_a78c.S		\
+					lib/cpus/aarch64/cortex_hayes.S
 	endif
 	# AArch64/AArch32 cores
 	FVP_CPU_LIBS	+=	lib/cpus/aarch64/cortex_a55.S		\
diff --git a/plat/arm/board/fvp_r/fvp_r_bl1_arch_setup.c b/plat/arm/board/fvp_r/fvp_r_bl1_arch_setup.c
new file mode 100644
index 0000000..ae6af6c
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_bl1_arch_setup.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include "../../../../bl1/bl1_private.h"
+#include <arch.h>
+
+#include <fvp_r_arch_helpers.h>
+
+/*******************************************************************************
+ * Function that does the first bit of architectural setup that affects
+ * execution in the non-secure address space.
+ ******************************************************************************/
+void bl1_arch_setup(void)
+{
+	/* v8-R64 does not include SCRs. */
+}
+
+/*******************************************************************************
+ * Set the Secure EL1 required architectural state
+ ******************************************************************************/
+void bl1_arch_next_el_setup(void)
+{
+	u_register_t next_sctlr;
+
+	/* Use the same endianness than the current BL */
+	next_sctlr = (read_sctlr_el2() & SCTLR_EE_BIT);
+
+	/* Set SCTLR Secure EL1 */
+	next_sctlr |= SCTLR_EL1_RES1;
+
+	write_sctlr_el1(next_sctlr);
+}
diff --git a/plat/arm/board/fvp_r/fvp_r_bl1_context_mgmt.c b/plat/arm/board/fvp_r/fvp_r_bl1_context_mgmt.c
new file mode 100644
index 0000000..7ae853b
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_bl1_context_mgmt.c
@@ -0,0 +1,88 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include "../../../../bl1/bl1_private.h"
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <context.h>
+#include <lib/el3_runtime/context_mgmt.h>
+
+#include <plat/common/platform.h>
+
+
+void cm_prepare_el2_exit(uint32_t security_state);
+
+/* Following contains the cpu context pointers. */
+static void *bl1_cpu_context_ptr[2];
+
+void *cm_get_context(uint32_t security_state)
+{
+	assert(sec_state_is_valid(security_state));
+	return bl1_cpu_context_ptr[security_state];
+}
+
+void cm_set_context(void *context, uint32_t security_state)
+{
+	assert(sec_state_is_valid(security_state));
+	bl1_cpu_context_ptr[security_state] = context;
+}
+
+/*******************************************************************************
+ * This function prepares the context for Secure/Normal world images.
+ * Normal world images are transitioned to EL2(if supported) else EL1.
+ ******************************************************************************/
+void bl1_prepare_next_image(unsigned int image_id)
+{
+	/*
+	 * Following array will be used for context management.
+	 * There are 2 instances, for the Secure and Non-Secure contexts.
+	 */
+	static cpu_context_t bl1_cpu_context[2];
+
+	unsigned int security_state, mode = MODE_EL1;
+	image_desc_t *desc;
+	entry_point_info_t *next_bl_ep;
+
+#if CTX_INCLUDE_AARCH32_REGS
+	/*
+	 * Ensure that the build flag to save AArch32 system registers in CPU
+	 * context is not set for AArch64-only platforms.
+	 */
+	if (el_implemented(1) == EL_IMPL_A64ONLY) {
+		ERROR("EL1 supports AArch64-only. Please set build flag %s",
+				"CTX_INCLUDE_AARCH32_REGS = 0\n");
+		panic();
+	}
+#endif
+
+	/* Get the image descriptor. */
+	desc = bl1_plat_get_image_desc(image_id);
+	assert(desc != NULL);
+
+	/* Get the entry point info. */
+	next_bl_ep = &desc->ep_info;
+
+	/* Get the image security state. */
+	security_state = GET_SECURITY_STATE(next_bl_ep->h.attr);
+
+	/* Setup the Secure/Non-Secure context if not done already. */
+	if (cm_get_context(security_state) == NULL) {
+		cm_set_context(&bl1_cpu_context[security_state], security_state);
+	}
+	/* Prepare the SPSR for the next BL image. */
+	next_bl_ep->spsr = (uint32_t)SPSR_64((uint64_t) mode,
+		(uint64_t)MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+
+	/* Allow platform to make change */
+	bl1_plat_set_ep_info(image_id, next_bl_ep);
+
+	/* Indicate that image is in execution state. */
+	desc->state = IMAGE_STATE_EXECUTED;
+
+	print_entry_point_info(next_bl_ep);
+}
diff --git a/plat/arm/board/fvp_r/fvp_r_bl1_entrypoint.S b/plat/arm/board/fvp_r/fvp_r_bl1_entrypoint.S
new file mode 100644
index 0000000..19a685c
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_bl1_entrypoint.S
@@ -0,0 +1,110 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <common/bl_common.h>
+#include <el2_common_macros.S>
+#include <lib/xlat_mpu/xlat_mpu.h>
+
+	.globl	bl1_entrypoint
+	.globl	bl1_run_next_image
+
+
+	/* -----------------------------------------------------
+	 * bl1_entrypoint() is the entry point into the trusted
+	 * firmware code when a cpu is released from warm or
+	 * cold reset.
+	 * -----------------------------------------------------
+	 */
+
+func bl1_entrypoint
+	/* ---------------------------------------------------------------------
+	 * If the reset address is programmable then bl1_entrypoint() is
+	 * executed only on the cold boot path. Therefore, we can skip the warm
+	 * boot mailbox mechanism.
+	 * ---------------------------------------------------------------------
+	 */
+	el2_entrypoint_common					\
+		_init_sctlr=1					\
+		_warm_boot_mailbox=!PROGRAMMABLE_RESET_ADDRESS	\
+		_secondary_cold_boot=!COLD_BOOT_SINGLE_CPU	\
+		_init_memory=1					\
+		_init_c_runtime=1				\
+		_exception_vectors=bl1_exceptions		\
+		_pie_fixup_size=0
+
+	/* --------------------------------------------------------------------
+	 * Perform BL1 setup
+	 * --------------------------------------------------------------------
+	 */
+	bl	bl1_setup
+
+#if ENABLE_PAUTH
+	/* --------------------------------------------------------------------
+	 * Program APIAKey_EL1 and enable pointer authentication.
+	 * --------------------------------------------------------------------
+	 */
+	bl	pauth_init_enable_el2
+#endif /* ENABLE_PAUTH */
+
+	/* --------------------------------------------------------------------
+	 * Initialize platform and jump to our c-entry point
+	 * for this type of reset.
+	 * --------------------------------------------------------------------
+	 */
+	bl	bl1_main
+
+	/* ---------------------------------------------
+	 * Should never reach this point.
+	 * ---------------------------------------------
+	 */
+	no_ret	plat_panic_handler
+endfunc bl1_entrypoint
+
+func bl1_run_next_image
+	mov	x20,x0
+
+	/* ---------------------------------------------
+	 * MPU needs to be disabled because both BL1 and BL33 execute
+	 * in EL2, and therefore share the same address space.
+	 * BL33 will initialize the address space according to its
+	 * own requirement.
+	 * ---------------------------------------------
+	 */
+	bl	disable_mpu_icache_el2
+
+	/* ---------------------------------------------
+	 * Wipe clean and disable all MPU regions.  This function expects
+	 * that the MPU has already been turned off, and caching concerns
+	 * addressed, but it also explicitly turns off the MPU.
+	 * ---------------------------------------------
+	 */
+	bl	clear_all_mpu_regions
+
+#if ENABLE_PAUTH
+	/* ---------------------------------------------
+	 * Disable pointer authentication before jumping
+	 * to next boot image.
+	 * ---------------------------------------------
+	 */
+	bl	pauth_disable_el2
+#endif /* ENABLE_PAUTH */
+
+	/* --------------------------------------------------
+	 * Do the transition to next boot image.
+	 * --------------------------------------------------
+	 */
+	ldp	x0, x1, [x20, #ENTRY_POINT_INFO_PC_OFFSET]
+	msr	elr_el2, x0
+	msr	spsr_el2, x1
+
+	ldp	x6, x7, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x30)]
+	ldp	x4, x5, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x20)]
+	ldp	x2, x3, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x10)]
+	ldp	x0, x1, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x0)]
+	exception_return
+endfunc bl1_run_next_image
diff --git a/plat/arm/board/fvp_r/fvp_r_bl1_exceptions.S b/plat/arm/board/fvp_r/fvp_r_bl1_exceptions.S
new file mode 100644
index 0000000..43c2e01
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_bl1_exceptions.S
@@ -0,0 +1,120 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <bl1/bl1.h>
+#include <common/bl_common.h>
+#include <context.h>
+
+/* -----------------------------------------------------------------------------
+ * File contains an EL2 equivalent of the EL3 vector table from:
+ * 	.../bl1/aarch64/bl1_exceptions.S
+ * -----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------
+ * Very simple stackless exception handlers used by BL1.
+ * -----------------------------------------------------------------------------
+ */
+	.globl	bl1_exceptions
+
+vector_base bl1_exceptions
+
+	/* -----------------------------------------------------
+	 * Current EL with SP0 : 0x0 - 0x200
+	 * -----------------------------------------------------
+	 */
+vector_entry SynchronousExceptionSP0
+	mov	x0, #SYNC_EXCEPTION_SP_EL0
+	bl	plat_report_exception
+	no_ret	plat_panic_handler
+end_vector_entry SynchronousExceptionSP0
+
+vector_entry IrqSP0
+	mov	x0, #IRQ_SP_EL0
+	bl	plat_report_exception
+	no_ret	plat_panic_handler
+end_vector_entry IrqSP0
+
+vector_entry FiqSP0
+	mov	x0, #FIQ_SP_EL0
+	bl	plat_report_exception
+	no_ret	plat_panic_handler
+end_vector_entry FiqSP0
+
+vector_entry SErrorSP0
+	mov	x0, #SERROR_SP_EL0
+	bl	plat_report_exception
+	no_ret	plat_panic_handler
+end_vector_entry SErrorSP0
+
+	/* -----------------------------------------------------
+	 * Current EL with SPx: 0x200 - 0x400
+	 * -----------------------------------------------------
+	 */
+vector_entry SynchronousExceptionSPx
+	mov	x0, #SYNC_EXCEPTION_SP_ELX
+	bl	plat_report_exception
+	no_ret	plat_panic_handler
+end_vector_entry SynchronousExceptionSPx
+
+vector_entry IrqSPx
+	mov	x0, #IRQ_SP_ELX
+	bl	plat_report_exception
+	no_ret	plat_panic_handler
+end_vector_entry IrqSPx
+
+vector_entry FiqSPx
+	mov	x0, #FIQ_SP_ELX
+	bl	plat_report_exception
+	no_ret	plat_panic_handler
+end_vector_entry FiqSPx
+
+vector_entry SErrorSPx
+	mov	x0, #SERROR_SP_ELX
+	bl	plat_report_exception
+	no_ret	plat_panic_handler
+end_vector_entry SErrorSPx
+
+	/* -----------------------------------------------------
+	 * Lower EL using AArch64 : 0x400 - 0x600
+	 * -----------------------------------------------------
+	 */
+vector_entry SynchronousExceptionA64
+	/* The current v8-R64 implementation does not support conduit calls */
+	b	el2_panic
+end_vector_entry SynchronousExceptionA64
+
+vector_entry IrqA64
+	mov	x0, #IRQ_AARCH64
+	bl	plat_report_exception
+	no_ret	plat_panic_handler
+end_vector_entry IrqA64
+
+vector_entry FiqA64
+	mov	x0, #FIQ_AARCH64
+	bl	plat_report_exception
+	no_ret	plat_panic_handler
+end_vector_entry FiqA64
+
+vector_entry SErrorA64
+	mov	x0, #SERROR_AARCH64
+	bl	plat_report_exception
+	no_ret	plat_panic_handler
+end_vector_entry SErrorA64
+
+
+unexpected_sync_exception:
+	mov	x0, #SYNC_EXCEPTION_AARCH64
+	bl	plat_report_exception
+	no_ret	plat_panic_handler
+
+	/* -----------------------------------------------------
+	 * Save Secure/Normal world context and jump to
+	 * BL1 SMC handler.
+	 * -----------------------------------------------------
+	 */
diff --git a/plat/arm/board/fvp_r/fvp_r_bl1_main.c b/plat/arm/board/fvp_r/fvp_r_bl1_main.c
new file mode 100644
index 0000000..2fd0e97
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_bl1_main.c
@@ -0,0 +1,290 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include "../../../../bl1/bl1_private.h"
+#include <arch.h>
+#include <arch_features.h>
+#include <arch_helpers.h>
+#include <bl1/bl1.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <drivers/auth/auth_mod.h>
+#include <drivers/console.h>
+#include <lib/cpus/errata_report.h>
+#include <lib/utils.h>
+#include <smccc_helpers.h>
+#include <tools_share/uuid.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+
+#include <platform_def.h>
+
+
+void bl1_run_next_image(const struct entry_point_info *bl_ep_info);
+
+/*******************************************************************************
+ * Function to perform late architectural and platform specific initialization.
+ * It also queries the platform to load and run next BL image. Only called
+ * by the primary cpu after a cold boot.
+ ******************************************************************************/
+void bl1_transfer_bl33(void)
+{
+	unsigned int image_id;
+
+	/* Get the image id of next image to load and run. */
+	image_id = bl1_plat_get_next_image_id();
+
+#if ENABLE_PAUTH
+	/*
+	 * Disable pointer authentication before running next boot image
+	 */
+	pauth_disable_el2();
+#endif /* ENABLE_PAUTH */
+
+#if !ARM_DISABLE_TRUSTED_WDOG
+	/* Disable watchdog before leaving BL1 */
+	plat_arm_secure_wdt_stop();
+#endif
+
+	bl1_run_next_image(&bl1_plat_get_image_desc(image_id)->ep_info);
+}
+
+/*******************************************************************************
+ * This function locates and loads the BL33 raw binary image in the trusted SRAM.
+ * Called by the primary cpu after a cold boot.
+ * TODO: Add support for alternative image load mechanism e.g using virtio/elf
+ * loader etc.
+ ******************************************************************************/
+void bl1_load_bl33(void)
+{
+	image_desc_t *desc;
+	image_info_t *info;
+	int err;
+
+	/* Get the image descriptor */
+	desc = bl1_plat_get_image_desc(BL33_IMAGE_ID);
+	assert(desc != NULL);
+
+	/* Get the image info */
+	info = &desc->image_info;
+	INFO("BL1: Loading BL33\n");
+
+	err = bl1_plat_handle_pre_image_load(BL33_IMAGE_ID);
+	if (err != 0) {
+		ERROR("Failure in pre image load handling of BL33 (%d)\n", err);
+		plat_error_handler(err);
+	}
+
+	err = load_auth_image(BL33_IMAGE_ID, info);
+	if (err != 0) {
+		ERROR("Failed to load BL33 firmware.\n");
+		plat_error_handler(err);
+	}
+
+	/* Allow platform to handle image information. */
+	err = bl1_plat_handle_post_image_load(BL33_IMAGE_ID);
+	if (err != 0) {
+		ERROR("Failure in post image load handling of BL33 (%d)\n", err);
+		plat_error_handler(err);
+	}
+
+	NOTICE("BL1: Booting BL33\n");
+}
+
+static void bl1_load_bl2(void);
+
+#if ENABLE_PAUTH
+uint64_t bl1_apiakey[2];
+#endif
+
+/*******************************************************************************
+ * Helper utility to calculate the BL2 memory layout taking into consideration
+ * the BL1 RW data assuming that it is at the top of the memory layout.
+ ******************************************************************************/
+void bl1_calc_bl2_mem_layout(const meminfo_t *bl1_mem_layout,
+			meminfo_t *bl2_mem_layout)
+{
+	assert(bl1_mem_layout != NULL);
+	assert(bl2_mem_layout != NULL);
+
+	/*
+	 * Remove BL1 RW data from the scope of memory visible to BL2.
+	 * This is assuming BL1 RW data is at the top of bl1_mem_layout.
+	 */
+	assert(bl1_mem_layout->total_base < BL1_RW_BASE);
+	bl2_mem_layout->total_base = bl1_mem_layout->total_base;
+	bl2_mem_layout->total_size = BL1_RW_BASE - bl1_mem_layout->total_base;
+
+	flush_dcache_range((uintptr_t)bl2_mem_layout, sizeof(meminfo_t));
+}
+
+/*******************************************************************************
+ * Setup function for BL1.
+ ******************************************************************************/
+void bl1_setup(void)
+{
+	/* Perform early platform-specific setup */
+	bl1_early_platform_setup();
+
+	/* Perform late platform-specific setup */
+	bl1_plat_arch_setup();
+
+#if CTX_INCLUDE_PAUTH_REGS
+	/*
+	 * Assert that the ARMv8.3-PAuth registers are present or an access
+	 * fault will be triggered when they are being saved or restored.
+	 */
+	assert(is_armv8_3_pauth_present());
+#endif /* CTX_INCLUDE_PAUTH_REGS */
+}
+
+/*******************************************************************************
+ * Function to perform late architectural and platform specific initialization.
+ * It also queries the platform to load and run next BL image. Only called
+ * by the primary cpu after a cold boot.
+ ******************************************************************************/
+void bl1_main(void)
+{
+	unsigned int image_id;
+
+	/* Announce our arrival */
+	NOTICE(FIRMWARE_WELCOME_STR);
+	NOTICE("BL1: %s\n", version_string);
+	NOTICE("BL1: %s\n", build_message);
+
+	INFO("BL1: RAM %p - %p\n", (void *)BL1_RAM_BASE, (void *)BL1_RAM_LIMIT);
+
+	print_errata_status();
+
+#if ENABLE_ASSERTIONS
+	u_register_t val;
+	/*
+	 * Ensure that MMU/Caches and coherency are turned on
+	 */
+	val = read_sctlr_el2();
+
+	assert((val & SCTLR_M_BIT) != 0U);
+	assert((val & SCTLR_C_BIT) != 0U);
+	assert((val & SCTLR_I_BIT) != 0U);
+	/*
+	 * Check that Cache Writeback Granule (CWG) in CTR_EL0 matches the
+	 * provided platform value
+	 */
+	val = (read_ctr_el0() >> CTR_CWG_SHIFT) & CTR_CWG_MASK;
+	/*
+	 * If CWG is zero, then no CWG information is available but we can
+	 * at least check the platform value is less than the architectural
+	 * maximum.
+	 */
+	if (val != 0) {
+		assert(SIZE_FROM_LOG2_WORDS(val) == CACHE_WRITEBACK_GRANULE);
+	} else {
+		assert(MAX_CACHE_LINE_SIZE >= CACHE_WRITEBACK_GRANULE);
+	}
+#endif /* ENABLE_ASSERTIONS */
+
+	/* Perform remaining generic architectural setup from ELmax */
+	bl1_arch_setup();
+
+#if TRUSTED_BOARD_BOOT
+	/* Initialize authentication module */
+	auth_mod_init();
+#endif /* TRUSTED_BOARD_BOOT */
+
+	/* Perform platform setup in BL1. */
+	bl1_platform_setup();
+
+#if ENABLE_PAUTH
+	/* Store APIAKey_EL1 key */
+	bl1_apiakey[0] = read_apiakeylo_el1();
+	bl1_apiakey[1] = read_apiakeyhi_el1();
+#endif /* ENABLE_PAUTH */
+
+	/* Get the image id of next image to load and run. */
+	image_id = bl1_plat_get_next_image_id();
+
+	/*
+	 * We currently interpret any image id other than
+	 * BL2_IMAGE_ID as the start of firmware update.
+	 */
+	if (image_id == BL2_IMAGE_ID) {
+		bl1_load_bl2();
+	} else if (image_id == BL33_IMAGE_ID) {
+		bl1_load_bl33();
+	} else {
+		NOTICE("BL1-FWU: *******FWU Process Started*******\n");
+	}
+
+	bl1_prepare_next_image(image_id);
+
+	console_flush();
+
+	bl1_transfer_bl33();
+}
+
+/*******************************************************************************
+ * This function locates and loads the BL2 raw binary image in the trusted SRAM.
+ * Called by the primary cpu after a cold boot.
+ * TODO: Add support for alternative image load mechanism e.g using virtio/elf
+ * loader etc.
+ ******************************************************************************/
+static void bl1_load_bl2(void)
+{
+	image_desc_t *desc;
+	image_info_t *info;
+	int err;
+
+	/* Get the image descriptor */
+	desc = bl1_plat_get_image_desc(BL2_IMAGE_ID);
+	assert(desc != NULL);
+
+	/* Get the image info */
+	info = &desc->image_info;
+	INFO("BL1: Loading BL2\n");
+
+	err = bl1_plat_handle_pre_image_load(BL2_IMAGE_ID);
+	if (err != 0) {
+		ERROR("Failure in pre image load handling of BL2 (%d)\n", err);
+		plat_error_handler(err);
+	}
+
+	err = load_auth_image(BL2_IMAGE_ID, info);
+	if (err != 0) {
+		ERROR("Failed to load BL2 firmware.\n");
+		plat_error_handler(err);
+	}
+
+	/* Allow platform to handle image information. */
+	err = bl1_plat_handle_post_image_load(BL2_IMAGE_ID);
+	if (err != 0) {
+		ERROR("Failure in post image load handling of BL2 (%d)\n", err);
+		plat_error_handler(err);
+	}
+
+	NOTICE("BL1: Booting BL2\n");
+}
+
+/*******************************************************************************
+ * Function called just before handing over to the next BL to inform the user
+ * about the boot progress. In debug mode, also print details about the BL
+ * image's execution context.
+ ******************************************************************************/
+void bl1_print_next_bl_ep_info(const entry_point_info_t *bl_ep_info)
+{
+	NOTICE("BL1: Booting BL31\n");
+	print_entry_point_info(bl_ep_info);
+}
+
+#if SPIN_ON_BL1_EXIT
+void print_debug_loop_message(void)
+{
+	NOTICE("BL1: Debug loop, spinning forever\n");
+	NOTICE("BL1: Please connect the debugger to continue\n");
+}
+#endif
+
diff --git a/plat/arm/board/fvp_r/fvp_r_bl1_setup.c b/plat/arm/board/fvp_r/fvp_r_bl1_setup.c
new file mode 100644
index 0000000..5e31d39
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_bl1_setup.c
@@ -0,0 +1,249 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/* Use the xlat_tables_v2 data structures: */
+#define XLAT_TABLES_LIB_V2	1
+
+#include <assert.h>
+
+#include "../../../../lib/xlat_mpu/xlat_mpu.h"
+#include <bl1/bl1.h>
+#include <common/tbbr/tbbr_img_def.h>
+#include <drivers/arm/sp805.h>
+#include <lib/fconf/fconf.h>
+#include <lib/fconf/fconf_dyn_cfg_getter.h>
+
+#include "fvp_r_private.h"
+#include <plat/arm/common/arm_config.h>
+#include <plat/arm/common/arm_def.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+#include <platform_def.h>
+
+#define MAP_BL1_TOTAL		MAP_REGION_FLAT(			\
+					bl1_tzram_layout.total_base,	\
+					bl1_tzram_layout.total_size,	\
+					MT_MEMORY | MT_RW | MT_SECURE)
+/*
+ * If SEPARATE_CODE_AND_RODATA=1 we define a region for each section
+ * otherwise one region is defined containing both
+ */
+#if SEPARATE_CODE_AND_RODATA
+#define MAP_BL1_RO		MAP_REGION_FLAT(			\
+					BL_CODE_BASE,			\
+					BL1_CODE_END - BL_CODE_BASE,	\
+					MT_CODE | MT_SECURE),		\
+				MAP_REGION_FLAT(			\
+					BL1_RO_DATA_BASE,		\
+					BL1_RO_DATA_END			\
+						- BL_RO_DATA_BASE,	\
+					MT_RO_DATA | MT_SECURE)
+#else
+#define MAP_BL1_RO		MAP_REGION_FLAT(			\
+					BL_CODE_BASE,			\
+					BL1_CODE_END - BL_CODE_BASE,	\
+					MT_CODE | MT_SECURE)
+#endif
+
+/* Data structure which holds the extents of the trusted SRAM for BL1*/
+static meminfo_t bl1_tzram_layout;
+
+struct meminfo *bl1_plat_sec_mem_layout(void)
+{
+	return &bl1_tzram_layout;
+}
+
+void arm_bl1_early_platform_setup(void)
+{
+
+#if !ARM_DISABLE_TRUSTED_WDOG
+	/* Enable watchdog */
+	plat_arm_secure_wdt_start();
+#endif
+
+	/* Initialize the console to provide early debug support */
+	arm_console_boot_init();
+
+	/* Allow BL1 to see the whole Trusted RAM */
+	bl1_tzram_layout.total_base = ARM_BL_RAM_BASE;
+	bl1_tzram_layout.total_size = ARM_BL_RAM_SIZE;
+}
+
+/* Boolean variable to hold condition whether firmware update needed or not */
+static bool is_fwu_needed;
+
+/*******************************************************************************
+ * Perform any BL1 specific platform actions.
+ ******************************************************************************/
+void bl1_early_platform_setup(void)
+{
+	arm_bl1_early_platform_setup();
+
+	/* Initialize the platform config for future decision making */
+	fvp_config_setup();
+
+	/*
+	 * Initialize Interconnect for this cluster during cold boot.
+	 * No need for locks as no other CPU is active.
+	 */
+	fvp_interconnect_init();
+	/*
+	 * Enable coherency in Interconnect for the primary CPU's cluster.
+	 */
+	fvp_interconnect_enable();
+}
+
+void arm_bl1_plat_arch_setup(void)
+{
+	const mmap_region_t bl_regions[] = {
+		MAP_BL1_TOTAL,
+		MAP_BL1_RO,
+#if USE_ROMLIB
+		ARM_MAP_ROMLIB_CODE,
+		ARM_MAP_ROMLIB_DATA,
+#endif
+#if ARM_CRYPTOCELL_INTEG
+		ARM_MAP_BL_COHERENT_RAM,
+#endif
+		/* DRAM1_region: */
+		MAP_REGION_FLAT(					\
+			PLAT_ARM_DRAM1_BASE,				\
+			PLAT_ARM_DRAM1_SIZE,				\
+			MT_MEMORY | MT_SECURE | MT_EXECUTE		\
+			| MT_RW | MT_NON_CACHEABLE),
+		/* NULL terminator: */
+		{0}
+	};
+
+	setup_page_tables(bl_regions, plat_arm_get_mmap());
+	enable_mpu_el2(0);
+
+	arm_setup_romlib();
+}
+
+void plat_arm_secure_wdt_start(void)
+{
+	sp805_start(ARM_SP805_TWDG_BASE, ARM_TWDG_LOAD_VAL);
+}
+
+void plat_arm_secure_wdt_stop(void)
+{
+	sp805_stop(ARM_SP805_TWDG_BASE);
+}
+
+/*
+ * Perform the platform specific architecture setup shared between
+ * ARM standard platforms.
+ */
+void arm_bl1_platform_setup(void)
+{
+	image_desc_t *desc;
+	uint32_t fw_config_max_size;
+
+	/* Initialise the IO layer and register platform IO devices */
+	plat_arm_io_setup();
+
+	/* Check if we need FWU before further processing */
+	is_fwu_needed = plat_arm_bl1_fwu_needed();
+	if (is_fwu_needed) {
+		ERROR("Skip platform setup as FWU detected\n");
+		return;
+	}
+
+	/* Set global DTB info for fixed fw_config information */
+	fw_config_max_size = ARM_FW_CONFIG_LIMIT - ARM_FW_CONFIG_BASE;
+	set_config_info(ARM_FW_CONFIG_BASE, fw_config_max_size, FW_CONFIG_ID);
+
+	desc = bl1_plat_get_image_desc(BL33_IMAGE_ID);
+	assert(desc != NULL);
+
+	/*
+	 * Allow access to the System counter timer module and program
+	 * counter frequency for non secure images during FWU
+	 */
+#ifdef ARM_SYS_TIMCTL_BASE
+	arm_configure_sys_timer();
+#endif
+#if (ARM_ARCH_MAJOR > 7) || defined(ARMV7_SUPPORTS_GENERIC_TIMER)
+	write_cntfrq_el0(plat_get_syscnt_freq2());
+#endif
+}
+
+void bl1_platform_setup(void)
+{
+	arm_bl1_platform_setup();
+
+	/* Initialize System level generic or SP804 timer */
+	fvp_timer_init();
+}
+
+__dead2 void bl1_plat_fwu_done(void *client_cookie, void *reserved)
+{
+	/* Setup the watchdog to reset the system as soon as possible */
+	sp805_refresh(ARM_SP805_TWDG_BASE, 1U);
+
+	while (true) {
+		wfi();
+	}
+}
+
+unsigned int bl1_plat_get_next_image_id(void)
+{
+	return  is_fwu_needed ? NS_BL1U_IMAGE_ID : BL33_IMAGE_ID;
+}
+
+/*
+ * Returns BL33 image details.
+ */
+struct image_desc *bl1_plat_get_image_desc(unsigned int image_id)
+{
+	static image_desc_t bl33_img_desc = BL33_IMAGE_DESC;
+
+	return &bl33_img_desc;
+}
+
+/*
+ * This function populates the default arguments to BL33.
+ * The BL33 memory layout structure is allocated and the
+ * calculated layout is populated in arg1 to BL33.
+ */
+int bl1_plat_handle_post_image_load(unsigned int image_id)
+{
+	meminfo_t *bl33_secram_layout;
+	meminfo_t *bl1_secram_layout;
+	image_desc_t *image_desc;
+	entry_point_info_t *ep_info;
+
+	if (image_id != BL33_IMAGE_ID) {
+		return 0;
+	}
+	/* Get the image descriptor */
+	image_desc = bl1_plat_get_image_desc(BL33_IMAGE_ID);
+	assert(image_desc != NULL);
+
+	/* Get the entry point info */
+	ep_info = &image_desc->ep_info;
+
+	/* Find out how much free trusted ram remains after BL1 load */
+	bl1_secram_layout = bl1_plat_sec_mem_layout();
+
+	/*
+	 * Create a new layout of memory for BL33 as seen by BL1 i.e.
+	 * tell it the amount of total and free memory available.
+	 * This layout is created at the first free address visible
+	 * to BL33. BL33 will read the memory layout before using its
+	 * memory for other purposes.
+	 */
+	bl33_secram_layout = (meminfo_t *) bl1_secram_layout->total_base;
+
+	bl1_calc_bl2_mem_layout(bl1_secram_layout, bl33_secram_layout);
+
+	ep_info->args.arg1 = (uintptr_t)bl33_secram_layout;
+
+	VERBOSE("BL1: BL3 memory layout address = %p\n",
+		(void *) bl33_secram_layout);
+	return 0;
+}
diff --git a/plat/arm/board/fvp_r/fvp_r_common.c b/plat/arm/board/fvp_r/fvp_r_common.c
new file mode 100644
index 0000000..bce943d
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_common.c
@@ -0,0 +1,309 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/* This uses xlat_mpu, but tables are set up using V2 mmap_region_t */
+#define XLAT_TABLES_LIB_V2	1
+
+#include <assert.h>
+#include <common/debug.h>
+
+#include <drivers/arm/cci.h>
+#include <drivers/arm/ccn.h>
+#include <drivers/arm/gicv2.h>
+#include <drivers/arm/sp804_delay_timer.h>
+#include <drivers/generic_delay_timer.h>
+#include <lib/mmio.h>
+#include <lib/smccc.h>
+#include <lib/xlat_tables/xlat_tables_compat.h>
+#include <services/arm_arch_svc.h>
+
+#include "fvp_r_private.h"
+#include <plat/arm/common/arm_config.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+#include <platform_def.h>
+
+
+/* Defines for GIC Driver build time selection */
+#define FVP_R_GICV3		2
+
+/*******************************************************************************
+ * arm_config holds the characteristics of the differences between the FVP_R
+ * platforms. It will be populated during cold boot at each boot stage by the
+ * primary before enabling the MPU (to allow interconnect configuration) &
+ * used thereafter. Each BL will have its own copy to allow independent
+ * operation.
+ ******************************************************************************/
+arm_config_t arm_config;
+
+#define MAP_DEVICE0	MAP_REGION_FLAT(DEVICE0_BASE,			\
+					DEVICE0_SIZE,			\
+					MT_DEVICE | MT_RW | MT_SECURE)
+
+#define MAP_DEVICE1	MAP_REGION_FLAT(DEVICE1_BASE,			\
+					DEVICE1_SIZE,			\
+					MT_DEVICE | MT_RW | MT_SECURE)
+
+/*
+ * Need to be mapped with write permissions in order to set a new non-volatile
+ * counter value.
+ */
+#define MAP_DEVICE2	MAP_REGION_FLAT(DEVICE2_BASE,			\
+					DEVICE2_SIZE,			\
+					MT_DEVICE | MT_RW | MT_SECURE)
+
+/*
+ * Table of memory regions for various BL stages to map using the MPU.
+ * This doesn't include Trusted SRAM as setup_page_tables() already takes care
+ * of mapping it.
+ *
+ * The flash needs to be mapped as writable in order to erase the FIP's Table of
+ * Contents in case of unrecoverable error (see plat_error_handler()).
+ */
+#ifdef IMAGE_BL1
+const mmap_region_t plat_arm_mmap[] = {
+	ARM_MAP_SHARED_RAM,
+	V2M_MAP_FLASH0_RW,
+	V2M_MAP_IOFPGA,
+	MAP_DEVICE0,
+	MAP_DEVICE1,
+#if TRUSTED_BOARD_BOOT
+	/* To access the Root of Trust Public Key registers. */
+	MAP_DEVICE2,
+#endif
+	{0}
+};
+#endif
+
+ARM_CASSERT_MMAP
+
+#if FVP_R_INTERCONNECT_DRIVER != FVP_R_CCN
+static const int fvp_cci400_map[] = {
+	PLAT_FVP_R_CCI400_CLUS0_SL_PORT,
+	PLAT_FVP_R_CCI400_CLUS1_SL_PORT,
+};
+
+static const int fvp_cci5xx_map[] = {
+	PLAT_FVP_R_CCI5XX_CLUS0_SL_PORT,
+	PLAT_FVP_R_CCI5XX_CLUS1_SL_PORT,
+};
+
+static unsigned int get_interconnect_master(void)
+{
+	unsigned int master;
+	u_register_t mpidr;
+
+	mpidr = read_mpidr_el1();
+	master = ((arm_config.flags & ARM_CONFIG_FVP_SHIFTED_AFF) != 0U) ?
+		MPIDR_AFFLVL2_VAL(mpidr) : MPIDR_AFFLVL1_VAL(mpidr);
+
+	assert(master < FVP_R_CLUSTER_COUNT);
+	return master;
+}
+#endif
+
+/*******************************************************************************
+ * Initialize the platform config for future decision making
+ ******************************************************************************/
+void __init fvp_config_setup(void)
+{
+	unsigned int rev, hbi, bld, arch, sys_id;
+
+	arm_config.flags |= ARM_CONFIG_BASE_MMAP;
+	sys_id = mmio_read_32(V2M_FVP_R_SYSREGS_BASE + V2M_SYS_ID);
+	rev = (sys_id >> V2M_SYS_ID_REV_SHIFT) & V2M_SYS_ID_REV_MASK;
+	hbi = (sys_id >> V2M_SYS_ID_HBI_SHIFT) & V2M_SYS_ID_HBI_MASK;
+	bld = (sys_id >> V2M_SYS_ID_BLD_SHIFT) & V2M_SYS_ID_BLD_MASK;
+	arch = (sys_id >> V2M_SYS_ID_ARCH_SHIFT) & V2M_SYS_ID_ARCH_MASK;
+
+	if (arch != ARCH_MODEL) {
+		ERROR("This firmware is for FVP_R models\n");
+		panic();
+	}
+
+	/*
+	 * The build field in the SYS_ID tells which variant of the GIC
+	 * memory is implemented by the model.
+	 */
+	switch (bld) {
+	case BLD_GIC_VE_MMAP:
+		ERROR("Legacy Versatile Express memory map for GIC %s",
+				"peripheral is not supported\n");
+		panic();
+		break;
+	case BLD_GIC_A53A57_MMAP:
+		break;
+	default:
+		ERROR("Unsupported board build %x\n", bld);
+		panic();
+	}
+
+	/*
+	 * The hbi field in the SYS_ID is 0x020 for the Base FVP_R & 0x010
+	 * for the Foundation FVP_R.
+	 */
+	switch (hbi) {
+	case HBI_FOUNDATION_FVP_R:
+		arm_config.flags = 0;
+
+		/*
+		 * Check for supported revisions of Foundation FVP_R
+		 * Allow future revisions to run but emit warning diagnostic
+		 */
+		switch (rev) {
+		case REV_FOUNDATION_FVP_R_V2_0:
+		case REV_FOUNDATION_FVP_R_V2_1:
+		case REV_FOUNDATION_FVP_R_v9_1:
+		case REV_FOUNDATION_FVP_R_v9_6:
+			break;
+		default:
+			WARN("Unrecognized Foundation FVP_R revision %x\n", rev);
+			break;
+		}
+		break;
+	case HBI_BASE_FVP_R:
+		arm_config.flags |= (ARM_CONFIG_BASE_MMAP | ARM_CONFIG_HAS_TZC);
+
+		/*
+		 * Check for supported revisions
+		 * Allow future revisions to run but emit warning diagnostic
+		 */
+		switch (rev) {
+		case REV_BASE_FVP_R_V0:
+			arm_config.flags |= ARM_CONFIG_FVP_HAS_CCI400;
+			break;
+		default:
+			WARN("Unrecognized Base FVP_R revision %x\n", rev);
+			break;
+		}
+		break;
+	default:
+		ERROR("Unsupported board HBI number 0x%x\n", hbi);
+		panic();
+	}
+
+	/*
+	 * We assume that the presence of MT bit, and therefore shifted
+	 * affinities, is uniform across the platform: either all CPUs, or no
+	 * CPUs implement it.
+	 */
+	if ((read_mpidr_el1() & MPIDR_MT_MASK) != 0U) {
+		arm_config.flags |= ARM_CONFIG_FVP_SHIFTED_AFF;
+	}
+}
+
+
+void __init fvp_interconnect_init(void)
+{
+#if FVP_R_INTERCONNECT_DRIVER == FVP_R_CCN
+	if (ccn_get_part0_id(PLAT_ARM_CCN_BASE) != CCN_502_PART0_ID) {
+		ERROR("Unrecognized CCN variant detected. Only CCN-502 is supported");
+		panic();
+	}
+
+	plat_arm_interconnect_init();
+#else
+	uintptr_t cci_base = 0U;
+	const int *cci_map = NULL;
+	unsigned int map_size = 0U;
+
+	/* Initialize the right interconnect */
+	if ((arm_config.flags & ARM_CONFIG_FVP_HAS_CCI5XX) != 0U) {
+		cci_base = PLAT_FVP_R_CCI5XX_BASE;
+		cci_map = fvp_cci5xx_map;
+		map_size = ARRAY_SIZE(fvp_cci5xx_map);
+	} else if ((arm_config.flags & ARM_CONFIG_FVP_HAS_CCI400) != 0U) {
+		cci_base = PLAT_FVP_R_CCI400_BASE;
+		cci_map = fvp_cci400_map;
+		map_size = ARRAY_SIZE(fvp_cci400_map);
+	} else {
+		return;
+	}
+
+	assert(cci_base != 0U);
+	assert(cci_map != NULL);
+	cci_init(cci_base, cci_map, map_size);
+#endif
+}
+
+void fvp_interconnect_enable(void)
+{
+#if FVP_R_INTERCONNECT_DRIVER == FVP_R_CCN
+	plat_arm_interconnect_enter_coherency();
+#else
+	unsigned int master;
+
+	if ((arm_config.flags & (ARM_CONFIG_FVP_HAS_CCI400 |
+				 ARM_CONFIG_FVP_HAS_CCI5XX)) != 0U) {
+		master = get_interconnect_master();
+		cci_enable_snoop_dvm_reqs(master);
+	}
+#endif
+}
+
+void fvp_interconnect_disable(void)
+{
+#if FVP_R_INTERCONNECT_DRIVER == FVP_R_CCN
+	plat_arm_interconnect_exit_coherency();
+#else
+	unsigned int master;
+
+	if ((arm_config.flags & (ARM_CONFIG_FVP_HAS_CCI400 |
+				 ARM_CONFIG_FVP_HAS_CCI5XX)) != 0U) {
+		master = get_interconnect_master();
+		cci_disable_snoop_dvm_reqs(master);
+	}
+#endif
+}
+
+#if TRUSTED_BOARD_BOOT
+int plat_get_mbedtls_heap(void **heap_addr, size_t *heap_size)
+{
+	assert(heap_addr != NULL);
+	assert(heap_size != NULL);
+
+	return arm_get_mbedtls_heap(heap_addr, heap_size);
+}
+#endif
+
+void fvp_timer_init(void)
+{
+#if USE_SP804_TIMER
+	/* Enable the clock override for SP804 timer 0, which means that no
+	 * clock dividers are applied and the raw (35MHz) clock will be used.
+	 */
+	mmio_write_32(V2M_SP810_BASE, FVP_R_SP810_CTRL_TIM0_OV);
+
+	/* Initialize delay timer driver using SP804 dual timer 0 */
+	sp804_timer_init(V2M_SP804_TIMER0_BASE,
+			SP804_TIMER_CLKMULT, SP804_TIMER_CLKDIV);
+#else
+	generic_delay_timer_init();
+
+	/* Enable System level generic timer */
+	mmio_write_32(ARM_SYS_CNTCTL_BASE + CNTCR_OFF,
+			CNTCR_FCREQ(0U) | CNTCR_EN);
+#endif /* USE_SP804_TIMER */
+}
+
+/* Get SOC version */
+int32_t plat_get_soc_version(void)
+{
+	return (int32_t)
+		((ARM_SOC_IDENTIFICATION_CODE << ARM_SOC_IDENTIFICATION_SHIFT)
+		 | (ARM_SOC_CONTINUATION_CODE << ARM_SOC_CONTINUATION_SHIFT)
+		 | FVP_R_SOC_ID);
+}
+
+/* Get SOC revision */
+int32_t plat_get_soc_revision(void)
+{
+	unsigned int sys_id;
+
+	sys_id = mmio_read_32(V2M_SYSREGS_BASE + V2M_SYS_ID);
+	return (int32_t)((sys_id >> V2M_SYS_ID_REV_SHIFT) &
+			V2M_SYS_ID_REV_MASK);
+}
diff --git a/plat/arm/board/fvp_r/fvp_r_context.S b/plat/arm/board/fvp_r/fvp_r_context.S
new file mode 100644
index 0000000..2746c2e
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_context.S
@@ -0,0 +1,17 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <asm_macros.S>
+
+	.global	el2_exit
+
+/* ------------------------------------------------------------------
+ * The mechanism, from el3_exit, is not used in this v8-R64 implementation.
+ * ------------------------------------------------------------------
+ */
+func el2_exit
+	exception_return
+endfunc el2_exit
diff --git a/plat/arm/board/fvp_r/fvp_r_context_mgmt.c b/plat/arm/board/fvp_r/fvp_r_context_mgmt.c
new file mode 100644
index 0000000..678b879
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_context_mgmt.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <lib/el3_runtime/context_mgmt.h>
+#include <lib/el3_runtime/pubsub_events.h>
+
+#include <platform_def.h>
+
+
+/*******************************************************************************
+ * File contains EL2 equivalents of EL3 functions from
+ * .../lib/el3_runtime/aarch64/context_mgmt.c
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Prepare the CPU system registers for first entry into secure or normal world
+ *
+ * The majority of the work needed is only for switching to non-secure, which
+ * is not available on v8-R64 cores, so this function is very simple.
+ ******************************************************************************/
+void cm_prepare_el2_exit(uint32_t security_state)
+{
+	cm_el1_sysregs_context_restore(security_state);
+	cm_set_next_eret_context(security_state);
+}
diff --git a/plat/arm/board/fvp_r/fvp_r_debug.S b/plat/arm/board/fvp_r/fvp_r_debug.S
new file mode 100644
index 0000000..8db1b09
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_debug.S
@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <common/debug.h>
+
+	.globl el2_panic
+
+	/***********************************************************
+	 * The common implementation of do_panic for all BL stages
+	 ***********************************************************/
+
+.section .rodata.panic_str, "aS"
+	panic_msg: .asciz "PANIC at PC : 0x"
+
+/*
+ * el2_panic will be redefined by the
+ * crash reporting mechanism (if enabled)
+ */
+el2_panic:
+	mov	x6, x30
+	bl	plat_crash_console_init
+
+	/* Check if the console is initialized */
+	cbz	x0, _panic_handler
+
+	/* The console is initialized */
+	adr	x4, panic_msg
+	bl	asm_print_str
+	mov	x4, x6
+
+	/* The panic location is lr -4 */
+	sub	x4, x4, #4
+	bl	asm_print_hex
+
+	bl	plat_crash_console_flush
+
+_panic_handler:
+	/* Pass to plat_panic_handler the address from where el2_panic was
+	 * called, not the address of the call from el2_panic. */
+	mov	x30, x6
+	b	plat_panic_handler
diff --git a/plat/arm/board/fvp_r/fvp_r_def.h b/plat/arm/board/fvp_r/fvp_r_def.h
new file mode 100644
index 0000000..b9f6989
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_def.h
@@ -0,0 +1,113 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef FVP_R_DEF_H
+#define FVP_R_DEF_H
+
+#include <lib/utils_def.h>
+
+#ifndef FVP_R_CLUSTER_COUNT
+#error "FVP_R_CLUSTER_COUNT is not set in makefile"
+#endif
+
+#ifndef FVP_R_MAX_CPUS_PER_CLUSTER
+#error "FVP_R_MAX_CPUS_PER_CLUSTER is not set in makefile"
+#endif
+
+#ifndef FVP_R_MAX_PE_PER_CPU
+#error "FVP_R_MAX_PE_PER_CPU is not set in makefile"
+#endif
+
+#define FVP_R_PRIMARY_CPU			0x0
+
+/* Defines for the Interconnect build selection */
+#define FVP_R_CCI			1
+#define FVP_R_CCN			2
+
+/******************************************************************************
+ * Definition of platform soc id
+ *****************************************************************************/
+#define FVP_R_SOC_ID      0
+
+/*******************************************************************************
+ * FVP_R memory map related constants
+ ******************************************************************************/
+
+#define FLASH1_BASE			UL(0x8c000000)
+#define FLASH1_SIZE			UL(0x04000000)
+
+#define PSRAM_BASE			UL(0x94000000)
+#define PSRAM_SIZE			UL(0x04000000)
+
+#define VRAM_BASE			UL(0x98000000)
+#define VRAM_SIZE			UL(0x02000000)
+
+/* Aggregate of all devices in the first GB */
+#define DEVICE0_BASE			UL(0xa0000000)
+#define DEVICE0_SIZE			UL(0x0c200000)
+
+/*
+ *  In case of FVP_R models with CCN, the CCN register space overlaps into
+ *  the NSRAM area.
+ */
+#define DEVICE1_BASE			UL(0xae000000)
+#define DEVICE1_SIZE			UL(0x1A00000)
+
+#define NSRAM_BASE			UL(0xae000000)
+#define NSRAM_SIZE			UL(0x10000)
+/* Devices in the second GB */
+#define DEVICE2_BASE			UL(0xffe00000)
+#define DEVICE2_SIZE			UL(0x00200000)
+
+#define PCIE_EXP_BASE			UL(0xc0000000)
+#define TZRNG_BASE			UL(0x7fe60000)
+
+/* Non-volatile counters */
+#define TRUSTED_NVCTR_BASE		UL(0xffe70000)
+#define TFW_NVCTR_BASE			(TRUSTED_NVCTR_BASE + UL(0x0000))
+#define TFW_NVCTR_SIZE			UL(4)
+#define NTFW_CTR_BASE			(TRUSTED_NVCTR_BASE + UL(0x0004))
+#define NTFW_CTR_SIZE			UL(4)
+
+/* Keys */
+#define SOC_KEYS_BASE			UL(0xffe80000)
+#define TZ_PUB_KEY_HASH_BASE		(SOC_KEYS_BASE + UL(0x0000))
+#define TZ_PUB_KEY_HASH_SIZE		UL(32)
+#define HU_KEY_BASE			(SOC_KEYS_BASE + UL(0x0020))
+#define HU_KEY_SIZE			UL(16)
+#define END_KEY_BASE			(SOC_KEYS_BASE + UL(0x0044))
+#define END_KEY_SIZE			UL(32)
+
+/* Constants to distinguish FVP_R type */
+#define HBI_BASE_FVP_R			U(0x020)
+#define REV_BASE_FVP_R_V0		U(0x0)
+#define REV_BASE_FVP_R_REVC		U(0x2)
+
+#define HBI_FOUNDATION_FVP_R		U(0x010)
+#define REV_FOUNDATION_FVP_R_V2_0	U(0x0)
+#define REV_FOUNDATION_FVP_R_V2_1	U(0x1)
+#define REV_FOUNDATION_FVP_R_v9_1	U(0x2)
+#define REV_FOUNDATION_FVP_R_v9_6	U(0x3)
+
+#define BLD_GIC_VE_MMAP			U(0x0)
+#define BLD_GIC_A53A57_MMAP		U(0x1)
+
+#define ARCH_MODEL			U(0x1)
+
+/* FVP_R Power controller base address*/
+#define PWRC_BASE			UL(0x1c100000)
+
+/* FVP_R SP804 timer frequency is 35 MHz*/
+#define SP804_TIMER_CLKMULT		1
+#define SP804_TIMER_CLKDIV		35
+
+/* SP810 controller. FVP_R specific flags */
+#define FVP_R_SP810_CTRL_TIM0_OV		BIT_32(16)
+#define FVP_R_SP810_CTRL_TIM1_OV		BIT_32(18)
+#define FVP_R_SP810_CTRL_TIM2_OV		BIT_32(20)
+#define FVP_R_SP810_CTRL_TIM3_OV		BIT_32(22)
+
+#endif /* FVP_R_DEF_H */
diff --git a/plat/arm/board/fvp_r/fvp_r_err.c b/plat/arm/board/fvp_r/fvp_r_err.c
new file mode 100644
index 0000000..7ee752b
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_err.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2021, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <errno.h>
+
+#include <common/debug.h>
+#include <drivers/arm/sp805.h>
+#include <drivers/cfi/v2m_flash.h>
+#include <plat/arm/common/plat_arm.h>
+#include <platform_def.h>
+
+/*
+ * FVP_R error handler
+ */
+__dead2 void plat_arm_error_handler(int err)
+{
+	int ret;
+
+	switch (err) {
+	case -ENOENT:
+	case -EAUTH:
+		/* Image load or authentication error. Erase the ToC */
+		INFO("Erasing FIP ToC from flash...\n");
+		(void)nor_unlock(PLAT_ARM_FLASH_IMAGE_BASE);
+		ret = nor_word_program(PLAT_ARM_FLASH_IMAGE_BASE, 0);
+		if (ret != 0) {
+			ERROR("Cannot erase ToC\n");
+		} else {
+			INFO("Done\n");
+		}
+		break;
+	default:
+		/* Unexpected error */
+		break;
+	}
+
+	(void)console_flush();
+
+	/* Setup the watchdog to reset the system as soon as possible */
+	sp805_refresh(ARM_SP805_TWDG_BASE, 1U);
+
+	while (true) {
+		wfi();
+	}
+}
diff --git a/plat/arm/board/fvp_r/fvp_r_helpers.S b/plat/arm/board/fvp_r/fvp_r_helpers.S
new file mode 100644
index 0000000..f7a04d8
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_helpers.S
@@ -0,0 +1,166 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <drivers/arm/fvp/fvp_pwrc.h>
+#include <drivers/arm/gicv2.h>
+#include <drivers/arm/gicv3.h>
+
+#include <platform_def.h>
+
+
+	.globl	plat_secondary_cold_boot_setup
+	.globl	plat_get_my_entrypoint
+	.globl	plat_is_my_cpu_primary
+	.globl	plat_arm_calc_core_pos
+
+	/* -----------------------------------------------------
+	 * void plat_secondary_cold_boot_setup (void);
+	 *
+	 * This function performs any platform specific actions
+	 * needed for a secondary cpu after a cold reset e.g
+	 * mark the cpu's presence, mechanism to place it in a
+	 * holding pen etc.
+	 * TODO: Should we read the PSYS register to make sure
+	 * that the request has gone through.
+	 * -----------------------------------------------------
+	 */
+func plat_secondary_cold_boot_setup
+	/* ---------------------------------------------
+	 * Power down this cpu.
+	 * TODO: Do we need to worry about powering the
+	 * cluster down as well here? That will need
+	 * locks which we won't have unless an elf-
+	 * loader zeroes out the zi section.
+	 * ---------------------------------------------
+	 */
+	mrs	x0, mpidr_el1
+	mov_imm	x1, PWRC_BASE
+	str	w0, [x1, #PPOFFR_OFF]
+
+	/* ---------------------------------------------
+	 * There is no sane reason to come out of this
+	 * wfi so panic if we do. This cpu will be pow-
+	 * ered on and reset by the cpu_on pm api
+	 * ---------------------------------------------
+	 */
+	dsb	sy
+	wfi
+	no_ret	plat_panic_handler
+endfunc plat_secondary_cold_boot_setup
+
+	/* ---------------------------------------------------------------------
+	 * uintptr_t plat_get_my_entrypoint (void);
+	 *
+	 * Main job of this routine is to distinguish between a cold and warm
+	 * boot. On FVP_R, this information can be queried from the power
+	 * controller. The Power Control SYS Status Register (PSYSR) indicates
+	 * the wake-up reason for the CPU.
+	 *
+	 * For a cold boot, return 0.
+	 * For a warm boot, read the mailbox and return the address it contains.
+	 *
+	 * TODO: PSYSR is a common register and should be
+	 * 	accessed using locks. Since it is not possible
+	 * 	to use locks immediately after a cold reset
+	 * 	we are relying on the fact that after a cold
+	 * 	reset all cpus will read the same WK field
+	 * ---------------------------------------------------------------------
+	 */
+func plat_get_my_entrypoint
+	/* ---------------------------------------------------------------------
+	 * When bit PSYSR.WK indicates either "Wake by PPONR" or "Wake by GIC
+	 * WakeRequest signal" then it is a warm boot.
+	 * ---------------------------------------------------------------------
+	 */
+	mrs	x2, mpidr_el1
+	mov_imm	x1, PWRC_BASE
+	str	w2, [x1, #PSYSR_OFF]
+	ldr	w2, [x1, #PSYSR_OFF]
+	ubfx	w2, w2, #PSYSR_WK_SHIFT, #PSYSR_WK_WIDTH
+	cmp	w2, #WKUP_PPONR
+	beq	warm_reset
+	cmp	w2, #WKUP_GICREQ
+	beq	warm_reset
+
+	/* Cold reset */
+	mov	x0, #0
+	ret
+
+warm_reset:
+	/* ---------------------------------------------------------------------
+	 * A mailbox is maintained in the trusted SRAM. It is flushed out of the
+	 * caches after every update using normal memory so it is safe to read
+	 * it here with SO attributes.
+	 * ---------------------------------------------------------------------
+	 */
+	mov_imm	x0, PLAT_ARM_TRUSTED_MAILBOX_BASE
+	ldr	x0, [x0]
+	cbz	x0, _panic_handler
+	ret
+
+	/* ---------------------------------------------------------------------
+	 * The power controller indicates this is a warm reset but the mailbox
+	 * is empty. This should never happen!
+	 * ---------------------------------------------------------------------
+	 */
+_panic_handler:
+	no_ret	plat_panic_handler
+endfunc plat_get_my_entrypoint
+
+	/* -----------------------------------------------------
+	 * unsigned int plat_is_my_cpu_primary (void);
+	 *
+	 * Find out whether the current cpu is the primary
+	 * cpu.
+	 * -----------------------------------------------------
+	 */
+func plat_is_my_cpu_primary
+	mrs	x0, mpidr_el1
+	mov_imm	x1, MPIDR_AFFINITY_MASK
+	and	x0, x0, x1
+	cmp	x0, #FVP_R_PRIMARY_CPU
+	cset	w0, eq
+	ret
+endfunc plat_is_my_cpu_primary
+
+	/* ---------------------------------------------------------------------
+	 * unsigned int plat_arm_calc_core_pos(u_register_t mpidr)
+	 *
+	 * Function to calculate the core position on FVP_R.
+	 *
+	 * (ClusterId * FVP_R_MAX_CPUS_PER_CLUSTER * FVP_R_MAX_PE_PER_CPU) +
+	 * (CPUId * FVP_R_MAX_PE_PER_CPU) +
+	 * ThreadId
+	 *
+	 * which can be simplified as:
+	 *
+	 * ((ClusterId * FVP_R_MAX_CPUS_PER_CLUSTER + CPUId) * FVP_R_MAX_PE_PER_CPU)
+	 * + ThreadId
+	 * ---------------------------------------------------------------------
+	 */
+func plat_arm_calc_core_pos
+	/*
+	 * Check for MT bit in MPIDR. If not set, shift MPIDR to left to make it
+	 * look as if in a multi-threaded implementation.
+	 */
+	tst	x0, #MPIDR_MT_MASK
+	lsl	x3, x0, #MPIDR_AFFINITY_BITS
+	csel	x3, x3, x0, eq
+
+	/* Extract individual affinity fields from MPIDR */
+	ubfx	x0, x3, #MPIDR_AFF0_SHIFT, #MPIDR_AFFINITY_BITS
+	ubfx	x1, x3, #MPIDR_AFF1_SHIFT, #MPIDR_AFFINITY_BITS
+	ubfx	x2, x3, #MPIDR_AFF2_SHIFT, #MPIDR_AFFINITY_BITS
+
+	/* Compute linear position */
+	mov	x4, #FVP_R_MAX_CPUS_PER_CLUSTER
+	madd	x1, x2, x4, x1
+	mov	x5, #FVP_R_MAX_PE_PER_CPU
+	madd	x0, x1, x5, x0
+	ret
+endfunc plat_arm_calc_core_pos
diff --git a/plat/arm/board/fvp_r/fvp_r_io_storage.c b/plat/arm/board/fvp_r/fvp_r_io_storage.c
new file mode 100644
index 0000000..3b44828
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_io_storage.c
@@ -0,0 +1,105 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <common/debug.h>
+#include <drivers/io/io_driver.h>
+#include <drivers/io/io_semihosting.h>
+#include <drivers/io/io_storage.h>
+#include <lib/semihosting.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/common_def.h>
+
+/* Semihosting filenames */
+#define BL33_IMAGE_NAME			"bl33.bin"
+
+#if TRUSTED_BOARD_BOOT
+#define TRUSTED_KEY_CERT_NAME		"trusted_key.crt"
+#define NT_FW_KEY_CERT_NAME		"nt_fw_key.crt"
+#define NT_FW_CONTENT_CERT_NAME		"nt_fw_content.crt"
+#endif /* TRUSTED_BOARD_BOOT */
+
+/* IO devices */
+static const io_dev_connector_t *sh_dev_con;
+static uintptr_t sh_dev_handle;
+
+static const io_file_spec_t sh_file_spec[] = {
+	[BL33_IMAGE_ID] = {
+		.path = BL33_IMAGE_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+#if TRUSTED_BOARD_BOOT
+	[TRUSTED_KEY_CERT_ID] = {
+		.path = TRUSTED_KEY_CERT_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+	[NON_TRUSTED_FW_KEY_CERT_ID] = {
+		.path = NT_FW_KEY_CERT_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+	[NON_TRUSTED_FW_CONTENT_CERT_ID] = {
+		.path = NT_FW_CONTENT_CERT_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+#endif /* TRUSTED_BOARD_BOOT */
+};
+
+
+static int open_semihosting(const uintptr_t spec)
+{
+	int result;
+	uintptr_t local_image_handle;
+
+	/* See if the file exists on semi-hosting.*/
+	result = io_dev_init(sh_dev_handle, (uintptr_t)NULL);
+	if (result == 0) {
+		result = io_open(sh_dev_handle, spec, &local_image_handle);
+		if (result == 0) {
+			VERBOSE("Using Semi-hosting IO\n");
+			io_close(local_image_handle);
+		}
+	}
+	return result;
+}
+
+void plat_arm_io_setup(void)
+{
+	int io_result;
+
+	io_result = arm_io_setup();
+	if (io_result < 0) {
+		panic();
+	}
+
+	/* Register the additional IO devices on this platform */
+	io_result = register_io_dev_sh(&sh_dev_con);
+	if (io_result < 0) {
+		panic();
+	}
+
+	/* Open connections to devices and cache the handles */
+	io_result = io_dev_open(sh_dev_con, (uintptr_t)NULL, &sh_dev_handle);
+	if (io_result < 0) {
+		panic();
+	}
+}
+
+/*
+ * FVP_R provides semihosting as an alternative to load images
+ */
+int plat_arm_get_alt_image_source(unsigned int image_id, uintptr_t *dev_handle,
+				  uintptr_t *image_spec)
+{
+	int result = open_semihosting((const uintptr_t)&sh_file_spec[image_id]);
+
+	if (result == 0) {
+		*dev_handle = sh_dev_handle;
+		*image_spec = (uintptr_t)&sh_file_spec[image_id];
+	}
+
+	return result;
+}
diff --git a/plat/arm/board/fvp_r/fvp_r_misc_helpers.S b/plat/arm/board/fvp_r/fvp_r_misc_helpers.S
new file mode 100644
index 0000000..67ad164
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_misc_helpers.S
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <asm_macros.S>
+
+	.globl	disable_mpu_el2
+	.globl	disable_mpu_icache_el2
+
+/* ---------------------------------------------------------------------------
+ * Disable the MPU at EL2.
+ * ---------------------------------------------------------------------------
+ */
+
+func disable_mpu_el2
+	mov	x1, #(SCTLR_M_BIT | SCTLR_C_BIT)
+do_disable_mpu_el2:
+	mrs	x0, sctlr_el2
+	bic	x0, x0, x1
+	msr	sctlr_el2, x0
+	isb	/* ensure MMU is off */
+	dsb	sy
+	ret
+endfunc disable_mpu_el2
+
+
+func disable_mpu_icache_el2
+	mov	x1, #(SCTLR_M_BIT | SCTLR_C_BIT | SCTLR_I_BIT)
+	b	do_disable_mpu_el2
+endfunc disable_mpu_icache_el2
diff --git a/plat/arm/board/fvp_r/fvp_r_pauth_helpers.S b/plat/arm/board/fvp_r/fvp_r_pauth_helpers.S
new file mode 100644
index 0000000..7e6bc3d
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_pauth_helpers.S
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2021, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <lib/el3_runtime/cpu_data.h>
+
+	.global	pauth_init_enable_el2
+	.global	pauth_disable_el2
+
+/* -------------------------------------------------------------
+ * File contains EL2 versions of EL3 funcs in:
+ * 	.../lib/extensions/pauth/pauth_helpers.S
+ * -------------------------------------------------------------
+ */
+
+/* -------------------------------------------------------------
+ * Program APIAKey_EL1 and enable pointer authentication in EL2
+ * -------------------------------------------------------------
+ */
+func pauth_init_enable_el2
+	stp	x29, x30, [sp, #-16]!
+
+	/* Initialize platform key */
+	bl	plat_init_apkey
+
+	/* Program instruction key A used by the Trusted Firmware */
+	msr	APIAKeyLo_EL1, x0
+	msr	APIAKeyHi_EL1, x1
+
+	/* Enable pointer authentication */
+	mrs	x0, sctlr_el2
+	orr	x0, x0, #SCTLR_EnIA_BIT
+
+#if ENABLE_BTI
+	 /* Enable PAC branch type compatibility */
+	bic	x0, x0, #SCTLR_BT_BIT
+#endif
+	msr	sctlr_el2, x0
+	isb
+
+	ldp	x29, x30, [sp], #16
+	ret
+endfunc pauth_init_enable_el2
+
+/* -------------------------------------------------------------
+ * Disable pointer authentication in EL2
+ * -------------------------------------------------------------
+ */
+func pauth_disable_el2
+	mrs	x0, sctlr_el2
+	bic	x0, x0, #SCTLR_EnIA_BIT
+	msr	sctlr_el2, x0
+	isb
+	ret
+endfunc pauth_disable_el2
diff --git a/plat/arm/board/fvp_r/fvp_r_private.h b/plat/arm/board/fvp_r/fvp_r_private.h
new file mode 100644
index 0000000..48f6e89
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_private.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef FVP_R_PRIVATE_H
+#define FVP_R_PRIVATE_H
+
+#include <plat/arm/common/plat_arm.h>
+
+/*******************************************************************************
+ * Function and variable prototypes
+ ******************************************************************************/
+
+void fvp_config_setup(void);
+
+void fvp_interconnect_init(void);
+void fvp_interconnect_enable(void);
+void fvp_interconnect_disable(void);
+void fvp_timer_init(void);
+
+#endif /* FVP_R_PRIVATE_H */
diff --git a/plat/arm/board/fvp_r/fvp_r_stack_protector.c b/plat/arm/board/fvp_r/fvp_r_stack_protector.c
new file mode 100644
index 0000000..69b6312
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_stack_protector.c
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+
+#include <fvp_r_arch_helpers.h>
+#include <plat/common/platform.h>
+
+#define RANDOM_CANARY_VALUE ((u_register_t) 8092347823957523895ULL)
+
+u_register_t plat_get_stack_protector_canary(void)
+{
+	/*
+	 * Ideally, a random number should be returned instead of the
+	 * combination of a timer's value and a compile-time constant. As the
+	 * FVP_R does not have any random number generator, this is better than
+	 * nothing but not necessarily really secure.
+	 */
+	return RANDOM_CANARY_VALUE ^ read_cntpct_el0();
+}
+
diff --git a/plat/arm/board/fvp_r/fvp_r_trusted_boot.c b/plat/arm/board/fvp_r/fvp_r_trusted_boot.c
new file mode 100644
index 0000000..de0b28f
--- /dev/null
+++ b/plat/arm/board/fvp_r/fvp_r_trusted_boot.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <stdint.h>
+#include <string.h>
+
+#include <lib/fconf/fconf.h>
+#include <lib/mmio.h>
+#include <tools_share/tbbr_oid.h>
+
+#include <plat/arm/common/fconf_nv_cntr_getter.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+#include <platform_def.h>
+
+
+/*
+ * Return the ROTPK hash in the following ASN.1 structure in DER format:
+ *
+ * AlgorithmIdentifier  ::=  SEQUENCE  {
+ *     algorithm	OBJECT IDENTIFIER,
+ *     parameters	ANY DEFINED BY algorithm OPTIONAL
+ * }
+ *
+ * DigestInfo ::= SEQUENCE {
+ *     digestAlgorithm	AlgorithmIdentifier,
+ *     digest		OCTET STRING
+ * }
+ */
+int plat_get_rotpk_info(void *cookie, void **key_ptr, unsigned int *key_len,
+			unsigned int *flags)
+{
+	return arm_get_rotpk_info(cookie, key_ptr, key_len, flags);
+}
+
+/*
+ * Store a new non-volatile counter value.
+ *
+ * On some FVP_R versions, the non-volatile counters are read-only so this
+ * function will always fail.
+ *
+ * Return: 0 = success, Otherwise = error
+ */
+int plat_set_nv_ctr(void *cookie, unsigned int nv_ctr)
+{
+	const char *oid;
+	uintptr_t nv_ctr_addr;
+
+	assert(cookie != NULL);
+
+	oid = (const char *)cookie;
+	if (strcmp(oid, TRUSTED_FW_NVCOUNTER_OID) == 0) {
+		nv_ctr_addr = FCONF_GET_PROPERTY(cot, nv_cntr_addr,
+						TRUSTED_NV_CTR_ID);
+	} else if (strcmp(oid, NON_TRUSTED_FW_NVCOUNTER_OID) == 0) {
+		nv_ctr_addr = FCONF_GET_PROPERTY(cot, nv_cntr_addr,
+						NON_TRUSTED_NV_CTR_ID);
+	} else {
+		return 1;
+	}
+
+	mmio_write_32(nv_ctr_addr, nv_ctr);
+
+	/*
+	 * If the FVP_R models a locked counter then its value cannot be updated
+	 * and the above write operation has been silently ignored.
+	 */
+	return (mmio_read_32(nv_ctr_addr) == nv_ctr) ? 0 : 1;
+}
diff --git a/plat/arm/board/fvp_r/include/fvp_r_arch_helpers.h b/plat/arm/board/fvp_r/include/fvp_r_arch_helpers.h
new file mode 100644
index 0000000..92bf484
--- /dev/null
+++ b/plat/arm/board/fvp_r/include/fvp_r_arch_helpers.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef FVP_R_ARCH_HELPERS_H
+#define FVP_R_ARCH_HELPERS_H
+
+#include <arch_helpers.h>
+
+/*******************************************************************************
+ * MPU register definitions
+ ******************************************************************************/
+#define MPUIR_EL2		S3_4_C0_C0_4
+#define PRBAR_EL2		S3_4_C6_C8_0
+#define PRLAR_EL2		S3_4_C6_C8_1
+#define PRSELR_EL2		S3_4_C6_C2_1
+#define PRENR_EL2		S3_4_C6_C1_1
+
+/* v8-R64 MPU registers */
+DEFINE_RENAME_SYSREG_RW_FUNCS(mpuir_el2, MPUIR_EL2)
+DEFINE_RENAME_SYSREG_RW_FUNCS(prenr_el2, PRENR_EL2)
+DEFINE_RENAME_SYSREG_RW_FUNCS(prselr_el2, PRSELR_EL2)
+DEFINE_RENAME_SYSREG_RW_FUNCS(prbar_el2, PRBAR_EL2)
+DEFINE_RENAME_SYSREG_RW_FUNCS(prlar_el2, PRLAR_EL2)
+
+#endif /* FVP_R_ARCH_HELPERS_H */
diff --git a/plat/arm/board/fvp_r/include/plat.ld.S b/plat/arm/board/fvp_r/include/plat.ld.S
new file mode 100644
index 0000000..e91a5a0
--- /dev/null
+++ b/plat/arm/board/fvp_r/include/plat.ld.S
@@ -0,0 +1,11 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef PLAT_LD_S
+#define PLAT_LD_S
+
+#include <plat/arm/common/arm_tzc_dram.ld.S>
+
+#endif /* PLAT_LD_S */
diff --git a/plat/arm/board/fvp_r/include/platform_def.h b/plat/arm/board/fvp_r/include/platform_def.h
new file mode 100644
index 0000000..4a6b441
--- /dev/null
+++ b/plat/arm/board/fvp_r/include/platform_def.h
@@ -0,0 +1,272 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef FVP_R_PLATFORM_DEF_H
+#define FVP_R_PLATFORM_DEF_H
+
+#define PLAT_V2M_OFFSET			0x80000000
+
+#define BL33_IMAGE_DESC {				\
+	.image_id = BL33_IMAGE_ID,			\
+	SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,	\
+		VERSION_2, image_info_t, 0),		\
+	.image_info.image_base = PLAT_ARM_DRAM1_BASE + 0x1000,		\
+	.image_info.image_max_size = UL(0x3ffff000), \
+	SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,	\
+		VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),\
+	.ep_info.pc = PLAT_ARM_DRAM1_BASE + 0x1000,				\
+	.ep_info.spsr = SPSR_64(MODE_EL2, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS),	\
+}
+
+#include "../fvp_r_def.h"
+#include <drivers/arm/tzc400.h>
+#include <lib/utils_def.h>
+#include <plat/arm/board/common/v2m_def.h>
+
+/* These are referenced by arm_def.h #included next, so #define first. */
+#define PLAT_ARM_TRUSTED_ROM_BASE	UL(0x80000000)
+#define PLAT_ARM_TRUSTED_SRAM_BASE	UL(0x84000000)
+#define PLAT_ARM_TRUSTED_DRAM_BASE	UL(0x86000000)
+#define PLAT_ARM_DRAM1_BASE		ULL(0x0)
+#define PLAT_ARM_DRAM2_BASE		ULL(0x080000000)
+
+#define PLAT_HW_CONFIG_DTB_BASE		ULL(0x12000000)
+#define PLAT_ARM_SYS_CNTCTL_BASE	UL(0xaa430000)
+#define PLAT_ARM_SYS_CNTREAD_BASE	UL(0xaa800000)
+#define PLAT_ARM_SYS_TIMCTL_BASE	UL(0xaa810000)
+#define PLAT_ARM_SYS_CNT_BASE_S		UL(0xaa820000)
+#define PLAT_ARM_SYS_CNT_BASE_NS	UL(0xaa830000)
+#define PLAT_ARM_SP805_TWDG_BASE	UL(0xaa490000)
+
+#include <plat/arm/common/arm_def.h>
+#include <plat/common/common_def.h>
+
+
+/* Required to create plat_regions: */
+#define MIN_LVL_BLOCK_DESC	U(1)
+
+/* Required platform porting definitions */
+#define PLATFORM_CORE_COUNT  (U(FVP_R_CLUSTER_COUNT) * \
+			      U(FVP_R_MAX_CPUS_PER_CLUSTER) * \
+			      U(FVP_R_MAX_PE_PER_CPU))
+
+#define PLAT_NUM_PWR_DOMAINS (U(FVP_R_CLUSTER_COUNT) + \
+			      PLATFORM_CORE_COUNT + U(1))
+
+#define PLAT_MAX_PWR_LVL		ARM_PWR_LVL2
+
+/*
+ * Other platform porting definitions are provided by included headers
+ */
+
+/*
+ * Required ARM standard platform porting definitions
+ */
+#define PLAT_ARM_CLUSTER_COUNT		U(FVP_R_CLUSTER_COUNT)
+#define PLAT_ARM_DRAM1_SIZE		ULL(0x7fffffff)
+#define PLAT_ARM_TRUSTED_SRAM_SIZE	UL(0x00040000)	/* 256 KB */
+#define PLAT_ARM_TRUSTED_ROM_SIZE	UL(0x04000000)	/* 64 MB */
+#define PLAT_ARM_TRUSTED_DRAM_SIZE	UL(0x02000000)	/* 32 MB */
+
+/* These two are defined thus in arm_def.h, but doesn't seem to see it... */
+#define PLAT_BL1_RO_LIMIT               (BL1_RO_BASE \
+					+ PLAT_ARM_TRUSTED_ROM_SIZE)
+
+#define PLAT_ARM_SYS_CNTCTL_BASE	UL(0xaa430000)
+#define PLAT_ARM_SYS_CNTREAD_BASE	UL(0xaa800000)
+#define PLAT_ARM_SYS_TIMCTL_BASE	UL(0xaa810000)
+#define PLAT_ARM_SYS_CNT_BASE_S		UL(0xaa820000)
+#define PLAT_ARM_SYS_CNT_BASE_NS	UL(0xaa830000)
+#define PLAT_ARM_SP805_TWDG_BASE	UL(0xaa490000)
+
+/* virtual address used by dynamic mem_protect for chunk_base */
+#define PLAT_ARM_MEM_PROTEC_VA_FRAME	UL(0xc0000000)
+
+/* No SCP in FVP_R */
+#define PLAT_ARM_SCP_TZC_DRAM1_SIZE	UL(0x0)
+
+#define PLAT_ARM_DRAM2_SIZE		UL(0x80000000)
+
+#define PLAT_HW_CONFIG_DTB_SIZE		ULL(0x8000)
+
+#define ARM_DTB_DRAM_NS			MAP_REGION_FLAT(		\
+					PLAT_HW_CONFIG_DTB_BASE,	\
+					PLAT_HW_CONFIG_DTB_SIZE,	\
+					MT_MEMORY | MT_RO | MT_NS)
+
+#define V2M_FVP_R_SYSREGS_BASE		UL(0x9c010000)
+
+/*
+ * Load address of BL33 for this platform port,
+ * U-Boot specifically must be loaded at a 4K aligned address.
+ */
+#define PLAT_ARM_NS_IMAGE_BASE		(PLAT_ARM_DRAM1_BASE + 0x1000)
+
+/*
+ * PLAT_ARM_MMAP_ENTRIES depends on the number of entries in the
+ * plat_arm_mmap array defined for each BL stage.
+ */
+#if !USE_ROMLIB
+# define PLAT_ARM_MMAP_ENTRIES		11
+# define MAX_XLAT_TABLES		5
+#else
+# define PLAT_ARM_MMAP_ENTRIES		12
+# define MAX_XLAT_TABLES		6
+#endif
+# define N_MPU_REGIONS			16  /* number of MPU regions */
+# define ALL_MPU_EL2_REGIONS_USED	0xffffffff
+	/* this is the PRENR_EL2 value if all MPU regions are in use */
+
+/*
+ * PLAT_ARM_MAX_BL1_RW_SIZE is calculated using the current BL1 RW debug size
+ * plus a little space for growth.
+ */
+#define PLAT_ARM_MAX_BL1_RW_SIZE	UL(0xB000)
+
+/*
+ * PLAT_ARM_MAX_ROMLIB_RW_SIZE is define to use a full page
+ */
+
+#if USE_ROMLIB
+#define PLAT_ARM_MAX_ROMLIB_RW_SIZE	UL(0x1000)
+#define PLAT_ARM_MAX_ROMLIB_RO_SIZE	UL(0xe000)
+#define FVP_R_BL2_ROMLIB_OPTIMIZATION UL(0x6000)
+#else
+#define PLAT_ARM_MAX_ROMLIB_RW_SIZE	UL(0)
+#define PLAT_ARM_MAX_ROMLIB_RO_SIZE	UL(0)
+#define FVP_R_BL2_ROMLIB_OPTIMIZATION UL(0)
+#endif
+
+/*
+ * PLAT_ARM_MAX_BL2_SIZE is calculated using the current BL2 debug size plus a
+ * little space for growth.
+ */
+#if TRUSTED_BOARD_BOOT
+#if COT_DESC_IN_DTB
+# define PLAT_ARM_MAX_BL2_SIZE	(UL(0x1E000) - FVP_R_BL2_ROMLIB_OPTIMIZATION)
+#else
+# define PLAT_ARM_MAX_BL2_SIZE	(UL(0x1D000) - FVP_R_BL2_ROMLIB_OPTIMIZATION)
+#endif
+#else
+# define PLAT_ARM_MAX_BL2_SIZE	(UL(0x13000) - FVP_R_BL2_ROMLIB_OPTIMIZATION)
+#endif
+
+/*
+ * Since BL31 NOBITS overlays BL2 and BL1-RW, PLAT_ARM_MAX_BL31_SIZE is
+ * calculated using the current BL31 PROGBITS debug size plus the sizes of
+ * BL2 and BL1-RW
+ */
+#define PLAT_ARM_MAX_BL31_SIZE		UL(0x3D000)
+
+/*
+ * Size of cacheable stacks
+ */
+#if defined(IMAGE_BL1)
+# if TRUSTED_BOARD_BOOT
+#  define PLATFORM_STACK_SIZE		UL(0x1000)
+# else
+#  define PLATFORM_STACK_SIZE		UL(0x500)
+# endif
+#endif
+
+#define MAX_IO_DEVICES			3
+#define MAX_IO_HANDLES			4
+
+/*
+ * These nominally reserve the last block of flash for PSCI MEM PROTECT flag,
+ * but no PSCI in FVP_R platform, so reserve nothing:
+ */
+#define PLAT_ARM_FLASH_IMAGE_BASE	(PLAT_ARM_DRAM1_BASE + UL(0x40000000))
+#define PLAT_ARM_FLASH_IMAGE_MAX_SIZE	(PLAT_ARM_DRAM1_SIZE - UL(0x40000000))
+
+#define PLAT_ARM_NVM_BASE		V2M_FLASH0_BASE
+#define PLAT_ARM_NVM_SIZE		(V2M_FLASH0_SIZE - V2M_FLASH_BLOCK_SIZE)
+
+/*
+ * PL011 related constants
+ */
+#define PLAT_ARM_BOOT_UART_BASE		V2M_IOFPGA_UART0_BASE
+#define PLAT_ARM_BOOT_UART_CLK_IN_HZ	V2M_IOFPGA_UART0_CLK_IN_HZ
+
+#define PLAT_ARM_RUN_UART_BASE		V2M_IOFPGA_UART1_BASE
+#define PLAT_ARM_RUN_UART_CLK_IN_HZ	V2M_IOFPGA_UART1_CLK_IN_HZ
+
+#define PLAT_ARM_CRASH_UART_BASE	PLAT_ARM_RUN_UART_BASE
+#define PLAT_ARM_CRASH_UART_CLK_IN_HZ	PLAT_ARM_RUN_UART_CLK_IN_HZ
+
+#define PLAT_ARM_TSP_UART_BASE		V2M_IOFPGA_UART2_BASE
+#define PLAT_ARM_TSP_UART_CLK_IN_HZ	V2M_IOFPGA_UART2_CLK_IN_HZ
+
+/* CCI related constants */
+#define PLAT_FVP_R_CCI400_BASE		UL(0xac090000)
+#define PLAT_FVP_R_CCI400_CLUS0_SL_PORT	3
+#define PLAT_FVP_R_CCI400_CLUS1_SL_PORT	4
+
+/* CCI-500/CCI-550 on Base platform */
+#define PLAT_FVP_R_CCI5XX_BASE		UL(0xaa000000)
+#define PLAT_FVP_R_CCI5XX_CLUS0_SL_PORT	5
+#define PLAT_FVP_R_CCI5XX_CLUS1_SL_PORT	6
+
+/* CCN related constants. Only CCN 502 is currently supported */
+#define PLAT_ARM_CCN_BASE		UL(0xae000000)
+#define PLAT_ARM_CLUSTER_TO_CCN_ID_MAP	1, 5, 7, 11
+
+/* System timer related constants */
+#define PLAT_ARM_NSTIMER_FRAME_ID	U(1)
+
+/* Mailbox base address */
+#define PLAT_ARM_TRUSTED_MAILBOX_BASE	ARM_TRUSTED_SRAM_BASE
+
+
+/* TrustZone controller related constants
+ *
+ * Currently only filters 0 and 2 are connected on Base FVP_R.
+ * Filter 0 : CPU clusters (no access to DRAM by default)
+ * Filter 1 : not connected
+ * Filter 2 : LCDs (access to VRAM allowed by default)
+ * Filter 3 : not connected
+ * Programming unconnected filters will have no effect at the
+ * moment. These filter could, however, be connected in future.
+ * So care should be taken not to configure the unused filters.
+ *
+ * Allow only non-secure access to all DRAM to supported devices.
+ * Give access to the CPUs and Virtio. Some devices
+ * would normally use the default ID so allow that too.
+ */
+#define PLAT_ARM_TZC_BASE		UL(0xaa4a0000)
+#define PLAT_ARM_TZC_FILTERS		TZC_400_REGION_ATTR_FILTER_BIT(0)
+
+#define PLAT_ARM_TZC_NS_DEV_ACCESS	(				\
+		TZC_REGION_ACCESS_RDWR(FVP_R_NSAID_DEFAULT)	|	\
+		TZC_REGION_ACCESS_RDWR(FVP_R_NSAID_PCI)		|	\
+		TZC_REGION_ACCESS_RDWR(FVP_R_NSAID_AP)		|	\
+		TZC_REGION_ACCESS_RDWR(FVP_R_NSAID_VIRTIO)	|	\
+		TZC_REGION_ACCESS_RDWR(FVP_R_NSAID_VIRTIO_OLD))
+
+/*
+ * GIC related constants to cater for both GICv2 and GICv3 instances of an
+ * FVP_R. They could be overridden at runtime in case the FVP_R implements the
+ * legacy VE memory map.
+ */
+#define PLAT_ARM_GICD_BASE		BASE_GICD_BASE
+#define PLAT_ARM_GICR_BASE		BASE_GICR_BASE
+#define PLAT_ARM_GICC_BASE		BASE_GICC_BASE
+
+#define PLAT_ARM_SP_IMAGE_STACK_BASE	(PLAT_SP_IMAGE_NS_BUF_BASE +	\
+					 PLAT_SP_IMAGE_NS_BUF_SIZE)
+
+#define PLAT_SP_PRI			PLAT_RAS_PRI
+
+/*
+ * Physical and virtual address space limits for MPU in AARCH64 & AARCH32 modes
+ */
+#define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 36)
+#define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 36)
+
+#define ARM_SOC_CONTINUATION_SHIFT	U(24)
+#define ARM_SOC_IDENTIFICATION_SHIFT	U(16)
+
+#endif /* FVP_R_PLATFORM_DEF_H */
diff --git a/plat/arm/board/fvp_r/platform.mk b/plat/arm/board/fvp_r/platform.mk
new file mode 100644
index 0000000..39509dd
--- /dev/null
+++ b/plat/arm/board/fvp_r/platform.mk
@@ -0,0 +1,125 @@
+#
+# Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# Only aarch64 ARCH supported for FVP_R
+ARCH	:= aarch64
+
+# Override to exclude BL2, BL2U, BL31, and BL33 for FVP_R
+override NEED_BL2	:= no
+override NEED_BL2U	:= no
+override NEED_BL31	:= no
+
+override CTX_INCLUDE_AARCH32_REGS	:=	0
+
+# Default cluster count for FVP_R
+FVP_R_CLUSTER_COUNT	:= 2
+
+# Default number of CPUs per cluster on FVP_R
+FVP_R_MAX_CPUS_PER_CLUSTER	:= 4
+
+# Default number of threads per CPU on FVP_R
+FVP_R_MAX_PE_PER_CPU	:= 1
+
+# Use MPU-based memory management:
+XLAT_MPU_LIB_V1		:=	1
+
+# Pass FVP_R_CLUSTER_COUNT to the build system.
+$(eval $(call add_define,FVP_R_CLUSTER_COUNT))
+
+# Pass FVP_R_MAX_CPUS_PER_CLUSTER to the build system.
+$(eval $(call add_define,FVP_R_MAX_CPUS_PER_CLUSTER))
+
+# Pass FVP_R_MAX_PE_PER_CPU to the build system.
+$(eval $(call add_define,FVP_R_MAX_PE_PER_CPU))
+
+# Sanity check the cluster count and if FVP_R_CLUSTER_COUNT <= 2,
+# choose the CCI driver , else the CCN driver
+ifeq ($(FVP_R_CLUSTER_COUNT), 0)
+$(error "Incorrect cluster count specified for FVP_R port")
+else ifeq ($(FVP_R_CLUSTER_COUNT),$(filter $(FVP_R_CLUSTER_COUNT),1 2))
+FVP_R_INTERCONNECT_DRIVER := FVP_R_CCI
+else
+FVP_R_INTERCONNECT_DRIVER := FVP_R_CCN
+endif
+
+$(eval $(call add_define,FVP_R_INTERCONNECT_DRIVER))
+
+ifeq (${FVP_R_INTERCONNECT_DRIVER}, FVP_R_CCI)
+FVP_R_INTERCONNECT_SOURCES	:= 	drivers/arm/cci/cci.c
+else ifeq (${FVP_R_INTERCONNECT_DRIVER}, FVP_R_CCN)
+FVP_R_INTERCONNECT_SOURCES	:= 	drivers/arm/ccn/ccn.c		\
+					plat/arm/common/arm_ccn.c
+else
+$(error "Incorrect CCN driver chosen on FVP_R port")
+endif
+
+PLAT_INCLUDES		:=	-Iplat/arm/board/fvp_r/include
+
+PLAT_BL_COMMON_SOURCES	:=	plat/arm/board/fvp_r/fvp_r_common.c
+
+FVP_R_CPU_LIBS		:=	lib/cpus/${ARCH}/aem_generic.S
+
+# select a different set of CPU files, depending on whether we compile for
+# hardware assisted coherency cores or not
+ifeq (${HW_ASSISTED_COHERENCY}, 0)
+# Cores used without DSU
+#	FVP_R_CPU_LIBS	+=	lib/cpus/aarch64/fvp_r.S
+else
+# Cores used with DSU only
+#	FVP_R_CPU_LIBS	+=	lib/cpus/aarch64/fvp_r.S
+endif
+
+BL1_SOURCES		+=	drivers/arm/sp805/sp805.c			\
+				drivers/delay_timer/delay_timer.c		\
+				drivers/io/io_semihosting.c			\
+				lib/semihosting/semihosting.c			\
+				lib/semihosting/${ARCH}/semihosting_call.S	\
+				plat/arm/board/fvp_r/fvp_r_bl1_arch_setup.c	\
+				plat/arm/board/fvp_r/fvp_r_bl1_setup.c		\
+				plat/arm/board/fvp_r/fvp_r_context_mgmt.c	\
+				plat/arm/board/fvp_r/fvp_r_err.c		\
+				plat/arm/board/fvp_r/fvp_r_io_storage.c		\
+				plat/arm/board/fvp_r/fvp_r_bl1_context_mgmt.c	\
+				plat/arm/board/fvp_r/fvp_r_bl1_entrypoint.S	\
+				plat/arm/board/fvp_r/fvp_r_bl1_exceptions.S	\
+				plat/arm/board/fvp_r/fvp_r_bl1_main.c		\
+				plat/arm/board/fvp_r/fvp_r_context.S		\
+				plat/arm/board/fvp_r/fvp_r_debug.S		\
+				plat/arm/board/fvp_r/fvp_r_helpers.S		\
+				plat/arm/board/fvp_r/fvp_r_misc_helpers.S	\
+				plat/arm/board/fvp_r/fvp_r_pauth_helpers.S	\
+				${FVP_R_CPU_LIBS}				\
+				${FVP_R_INTERCONNECT_SOURCES}
+
+ifeq (${USE_SP804_TIMER},1)
+BL1_SOURCES		+=	drivers/arm/sp804/sp804_delay_timer.c
+else
+BL1_SOURCES		+=	drivers/delay_timer/generic_delay_timer.c
+endif
+
+# Enable Activity Monitor Unit extensions by default
+ENABLE_AMU			:=	1
+
+ifneq (${ENABLE_STACK_PROTECTOR},0)
+PLAT_BL_COMMON_SOURCES	+=	plat/arm/board/fvp_r/fvp_r_stack_protector.c
+endif
+
+NEED_BL32 := no
+
+ifneq (${BL2_AT_EL3}, 0)
+    override BL1_SOURCES =
+endif
+
+include plat/arm/board/common/board_common.mk
+include plat/arm/common/arm_common.mk
+
+ifeq (${TRUSTED_BOARD_BOOT}, 1)
+BL1_SOURCES		+=	plat/arm/board/fvp_r/fvp_r_trusted_boot.c
+
+# FVP being a development platform, enable capability to disable Authentication
+# dynamically if TRUSTED_BOARD_BOOT is set.
+DYN_DISABLE_AUTH	:=	1
+endif
diff --git a/plat/arm/common/arm_bl1_fwu.c b/plat/arm/common/arm_bl1_fwu.c
index 124c1af..ce2c356 100644
--- a/plat/arm/common/arm_bl1_fwu.c
+++ b/plat/arm/common/arm_bl1_fwu.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2021, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -16,6 +16,8 @@
 #include <plat/arm/common/plat_arm.h>
 #include <plat/common/platform.h>
 
+#pragma weak bl1_plat_get_image_desc
+
 /* Struct to keep track of usable memory */
 typedef struct bl1_mem_info {
 	uintptr_t mem_base;
diff --git a/plat/arm/common/arm_bl1_setup.c b/plat/arm/common/arm_bl1_setup.c
index 4b2a062..872de3e 100644
--- a/plat/arm/common/arm_bl1_setup.c
+++ b/plat/arm/common/arm_bl1_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2021, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -22,9 +22,12 @@
 #pragma weak bl1_early_platform_setup
 #pragma weak bl1_plat_arch_setup
 #pragma weak bl1_plat_sec_mem_layout
+#pragma weak arm_bl1_early_platform_setup
 #pragma weak bl1_plat_prepare_exit
 #pragma weak bl1_plat_get_next_image_id
 #pragma weak plat_arm_bl1_fwu_needed
+#pragma weak arm_bl1_plat_arch_setup
+#pragma weak arm_bl1_platform_setup
 
 #define MAP_BL1_TOTAL		MAP_REGION_FLAT(			\
 					bl1_tzram_layout.total_base,	\
diff --git a/plat/arm/common/arm_bl2_setup.c b/plat/arm/common/arm_bl2_setup.c
index 26af383..5b26a1d 100644
--- a/plat/arm/common/arm_bl2_setup.c
+++ b/plat/arm/common/arm_bl2_setup.c
@@ -233,7 +233,7 @@
  ******************************************************************************/
 int arm_bl2_plat_handle_post_image_load(unsigned int image_id)
 {
-#if defined(SPD_spmd) && SPMD_SPM_AT_SEL2
+#if defined(SPD_spmd) && BL2_ENABLE_SP_LOAD
 	/* For Secure Partitions we don't need post processing */
 	if ((image_id >= (MAX_NUMBER_IDS - MAX_SP_IDS)) &&
 		(image_id < MAX_NUMBER_IDS)) {
diff --git a/plat/arm/common/arm_common.mk b/plat/arm/common/arm_common.mk
index 4d5e8b4..dc8c6d0 100644
--- a/plat/arm/common/arm_common.mk
+++ b/plat/arm/common/arm_common.mk
@@ -206,18 +206,22 @@
 				plat/arm/common/arm_console.c
 
 ifeq (${ARM_XLAT_TABLES_LIB_V1}, 1)
-PLAT_BL_COMMON_SOURCES	+=	lib/xlat_tables/xlat_tables_common.c		\
+PLAT_BL_COMMON_SOURCES 	+=	lib/xlat_tables/xlat_tables_common.c	      \
 				lib/xlat_tables/${ARCH}/xlat_tables.c
 else
+ifeq (${XLAT_MPU_LIB_V1}, 1)
+include lib/xlat_mpu/xlat_mpu.mk
+PLAT_BL_COMMON_SOURCES	+=	${XLAT_MPU_LIB_V1_SRCS}
+else
 include lib/xlat_tables_v2/xlat_tables.mk
-
-PLAT_BL_COMMON_SOURCES	+=	${XLAT_TABLES_LIB_SRCS}
+PLAT_BL_COMMON_SOURCES	+=      ${XLAT_TABLES_LIB_SRCS}
+endif
 endif
 
 ARM_IO_SOURCES		+=	plat/arm/common/arm_io_storage.c		\
 				plat/arm/common/fconf/arm_fconf_io.c
 ifeq (${SPD},spmd)
-    ifeq (${SPMD_SPM_AT_SEL2},1)
+    ifeq (${BL2_ENABLE_SP_LOAD},1)
          ARM_IO_SOURCES		+=	plat/arm/common/fconf/arm_fconf_sp.c
     endif
 endif
@@ -351,8 +355,13 @@
 
     # Include the selected chain of trust sources.
     ifeq (${COT},tbbr)
-	BL1_SOURCES     +=      drivers/auth/tbbr/tbbr_cot_common.c		\
+        ifeq (${PLAT},fvp_r)
+            BL1_SOURCES	+=	drivers/auth/tbbr/tbbr_cot_common.c		\
+				drivers/auth/tbbr/tbbr_cot_bl1_r64.c
+        else
+            BL1_SOURCES	+=	drivers/auth/tbbr/tbbr_cot_common.c		\
 				drivers/auth/tbbr/tbbr_cot_bl1.c
+        endif
         ifneq (${COT_DESC_IN_DTB},0)
             BL2_SOURCES	+=	lib/fconf/fconf_cot_getter.c
         else
diff --git a/plat/arm/common/arm_image_load.c b/plat/arm/common/arm_image_load.c
index ebf6dff..c411c6c 100644
--- a/plat/arm/common/arm_image_load.c
+++ b/plat/arm/common/arm_image_load.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2021, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -32,7 +32,7 @@
 		next_bl_params_cpy_ptr);
 }
 
-#if defined(SPD_spmd) && SPMD_SPM_AT_SEL2
+#if defined(SPD_spmd) && BL2_ENABLE_SP_LOAD
 /*******************************************************************************
  * This function appends Secure Partitions to list of loadable images.
  ******************************************************************************/
@@ -76,7 +76,7 @@
  ******************************************************************************/
 struct bl_load_info *plat_get_bl_image_load_info(void)
 {
-#if defined(SPD_spmd) && SPMD_SPM_AT_SEL2
+#if defined(SPD_spmd) && BL2_ENABLE_SP_LOAD
 	bl_load_info_t *bl_load_info;
 
 	bl_load_info = get_bl_load_info_from_mem_params_desc();
diff --git a/plat/arm/css/sgi/aarch64/sgi_helper.S b/plat/arm/css/sgi/aarch64/sgi_helper.S
index 04bfb77..ced59e8 100644
--- a/plat/arm/css/sgi/aarch64/sgi_helper.S
+++ b/plat/arm/css/sgi/aarch64/sgi_helper.S
@@ -9,6 +9,8 @@
 #include <platform_def.h>
 #include <cortex_a75.h>
 #include <neoverse_n1.h>
+#include <neoverse_v1.h>
+#include <neoverse_n2.h>
 #include <cpu_macros.S>
 
 	.globl	plat_arm_calc_core_pos
@@ -66,6 +68,8 @@
 func plat_reset_handler
 	jump_if_cpu_midr CORTEX_A75_MIDR, A75
 	jump_if_cpu_midr NEOVERSE_N1_MIDR, N1
+	jump_if_cpu_midr NEOVERSE_V1_MIDR, V1
+	jump_if_cpu_midr NEOVERSE_N2_MIDR, N2
 	ret
 
 	/* -----------------------------------------------------
@@ -85,4 +89,18 @@
 	msr	NEOVERSE_N1_CPUPWRCTLR_EL1, x0
 	isb
 	ret
+
+V1:
+	mrs	x0, NEOVERSE_V1_CPUPWRCTLR_EL1
+	bic	x0, x0, #NEOVERSE_V1_CPUPWRCTLR_EL1_CORE_PWRDN_BIT
+	msr	NEOVERSE_V1_CPUPWRCTLR_EL1, x0
+	isb
+	ret
+
+N2:
+	mrs	x0, NEOVERSE_N2_CPUPWRCTLR_EL1
+	bic	x0, x0, #NEOVERSE_N2_CORE_PWRDN_EN_BIT
+	msr	NEOVERSE_N2_CPUPWRCTLR_EL1, x0
+	isb
+	ret
 endfunc plat_reset_handler
diff --git a/plat/imx/imx8m/imx8mm/imx8mm_io_storage.c b/plat/imx/common/imx_io_storage.c
similarity index 93%
rename from plat/imx/imx8m/imx8mm/imx8mm_io_storage.c
rename to plat/imx/common/imx_io_storage.c
index ff6687e..bb35662 100644
--- a/plat/imx/imx8m/imx8mm/imx8mm_io_storage.c
+++ b/plat/imx/common/imx_io_storage.c
@@ -6,10 +6,10 @@
 
 #include <assert.h>
 
+#include <common/debug.h>
 #include <drivers/io/io_block.h>
 #include <drivers/io/io_driver.h>
 #include <drivers/io/io_fip.h>
-#include <drivers/io/io_driver.h>
 #include <drivers/io/io_memmap.h>
 #include <drivers/mmc.h>
 #include <lib/utils_def.h>
@@ -21,21 +21,21 @@
 static const io_dev_connector_t *fip_dev_con;
 static uintptr_t fip_dev_handle;
 
-#ifndef IMX8MM_FIP_MMAP
+#ifndef IMX_FIP_MMAP
 static const io_dev_connector_t *mmc_dev_con;
 static uintptr_t mmc_dev_handle;
 
 static const io_block_spec_t mmc_fip_spec = {
-	.offset = IMX8MM_FIP_MMC_BASE,
-	.length = IMX8MM_FIP_SIZE
+	.offset = IMX_FIP_MMC_BASE,
+	.length = IMX_FIP_SIZE
 };
 
 static const io_block_dev_spec_t mmc_dev_spec = {
 	/* It's used as temp buffer in block driver. */
 	.buffer		= {
-		.offset	= IMX8MM_FIP_BASE,
+		.offset	= IMX_FIP_BASE,
 		/* do we need a new value? */
-		.length = IMX8MM_FIP_SIZE
+		.length = IMX_FIP_SIZE
 	},
 	.ops		= {
 		.read	= mmc_read_blocks,
@@ -51,8 +51,8 @@
 static uintptr_t memmap_dev_handle;
 
 static const io_block_spec_t fip_block_spec = {
-	.offset = IMX8MM_FIP_BASE,
-	.length = IMX8MM_FIP_SIZE
+	.offset = IMX_FIP_BASE,
+	.length = IMX_FIP_SIZE
 };
 static int open_memmap(const uintptr_t spec);
 #endif
@@ -113,6 +113,7 @@
 };
 #endif /* TRUSTED_BOARD_BOOT */
 
+/* TODO: this structure is replicated multiple times. rationalize it ! */
 struct plat_io_policy {
 	uintptr_t *dev_handle;
 	uintptr_t image_spec;
@@ -120,7 +121,7 @@
 };
 
 static const struct plat_io_policy policies[] = {
-#ifndef IMX8MM_FIP_MMAP
+#ifndef IMX_FIP_MMAP
 	[FIP_IMAGE_ID] = {
 		&mmc_dev_handle,
 		(uintptr_t)&mmc_fip_spec,
@@ -219,7 +220,7 @@
 	return result;
 }
 
-#ifndef IMX8MM_FIP_MMAP
+#ifndef IMX_FIP_MMAP
 static int open_mmc(const uintptr_t spec)
 {
 	int result;
@@ -270,11 +271,11 @@
 	return result;
 }
 
-void plat_imx8mm_io_setup(void)
+void plat_imx_io_setup(void)
 {
 	int result __unused;
 
-#ifndef IMX8MM_FIP_MMAP
+#ifndef IMX_FIP_MMAP
 	result = register_io_dev_block(&mmc_dev_con);
 	assert(result == 0);
 
diff --git a/plat/imx/imx7/common/imx7.mk b/plat/imx/imx7/common/imx7.mk
index 3a95772..fdde9a9 100644
--- a/plat/imx/imx7/common/imx7.mk
+++ b/plat/imx/imx7/common/imx7.mk
@@ -16,6 +16,7 @@
 				-Iplat/imx/imx7/include			\
 				-Idrivers/imx/timer			\
 				-Idrivers/imx/usdhc			\
+				-Iinclude/common/tbbr
 
 # Translation tables library
 include lib/xlat_tables_v2/xlat_tables.mk
@@ -46,7 +47,7 @@
 				plat/imx/imx7/common/imx7_bl2_el3_common.c	\
 				plat/imx/imx7/common/imx7_helpers.S		\
 				plat/imx/imx7/common/imx7_image_load.c		\
-				plat/imx/imx7/common/imx7_io_storage.c		\
+				plat/imx/common/imx_io_storage.c		\
 				plat/imx/common/aarch32/imx_uart_console.S	\
 				${XLAT_TABLES_LIB_SRCS}
 
diff --git a/plat/imx/imx7/common/imx7_bl2_el3_common.c b/plat/imx/imx7/common/imx7_bl2_el3_common.c
index 7f156e3..4e5028c 100644
--- a/plat/imx/imx7/common/imx7_bl2_el3_common.c
+++ b/plat/imx/imx7/common/imx7_bl2_el3_common.c
@@ -173,7 +173,7 @@
 	console_set_scope(&console, console_scope);
 
 	/* Open handles to persistent storage */
-	plat_imx7_io_setup();
+	plat_imx_io_setup();
 
 	/* Setup higher-level functionality CAAM, RTC etc */
 	imx_caam_init();
@@ -183,7 +183,7 @@
 	VERBOSE("\tOPTEE       0x%08x-0x%08x\n", IMX7_OPTEE_BASE, IMX7_OPTEE_LIMIT);
 	VERBOSE("\tATF/BL2     0x%08x-0x%08x\n", BL2_RAM_BASE, BL2_RAM_LIMIT);
 	VERBOSE("\tSHRAM       0x%08x-0x%08x\n", SHARED_RAM_BASE, SHARED_RAM_LIMIT);
-	VERBOSE("\tFIP         0x%08x-0x%08x\n", IMX7_FIP_BASE, IMX7_FIP_LIMIT);
+	VERBOSE("\tFIP         0x%08x-0x%08x\n", IMX_FIP_BASE, IMX_FIP_LIMIT);
 	VERBOSE("\tDTB-OVERLAY 0x%08x-0x%08x\n", IMX7_DTB_OVERLAY_BASE, IMX7_DTB_OVERLAY_LIMIT);
 	VERBOSE("\tDTB         0x%08x-0x%08x\n", IMX7_DTB_BASE, IMX7_DTB_LIMIT);
 	VERBOSE("\tUBOOT/BL33  0x%08x-0x%08x\n", IMX7_UBOOT_BASE, IMX7_UBOOT_LIMIT);
diff --git a/plat/imx/imx7/common/imx7_io_storage.c b/plat/imx/imx7/common/imx7_io_storage.c
deleted file mode 100644
index 977181d..0000000
--- a/plat/imx/imx7/common/imx7_io_storage.c
+++ /dev/null
@@ -1,270 +0,0 @@
-/*
- * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#include <assert.h>
-
-#include <platform_def.h>
-
-#include <common/debug.h>
-#include <drivers/io/io_block.h>
-#include <drivers/io/io_driver.h>
-#include <drivers/io/io_fip.h>
-#include <drivers/io/io_memmap.h>
-#include <drivers/mmc.h>
-#include <tools_share/firmware_image_package.h>
-
-static const io_dev_connector_t *fip_dev_con;
-static uintptr_t fip_dev_handle;
-
-#ifndef IMX7_FIP_MMAP
-static const io_dev_connector_t *mmc_dev_con;
-static uintptr_t mmc_dev_handle;
-
-static const io_block_spec_t mmc_fip_spec = {
-	.offset = IMX7_FIP_MMC_BASE,
-	.length = IMX7_FIP_SIZE
-};
-
-static const io_block_dev_spec_t mmc_dev_spec = {
-	/* It's used as temp buffer in block driver. */
-	.buffer		= {
-		.offset	= IMX7_FIP_BASE,
-		/* do we need a new value? */
-		.length = IMX7_FIP_SIZE
-	},
-	.ops		= {
-		.read	= mmc_read_blocks,
-		.write	= mmc_write_blocks,
-	},
-	.block_size	= MMC_BLOCK_SIZE,
-};
-
-static int open_mmc(const uintptr_t spec);
-
-#else
-static const io_dev_connector_t *memmap_dev_con;
-static uintptr_t memmap_dev_handle;
-
-static const io_block_spec_t fip_block_spec = {
-	.offset = IMX7_FIP_BASE,
-	.length = IMX7_FIP_SIZE
-};
-static int open_memmap(const uintptr_t spec);
-#endif
-static int open_fip(const uintptr_t spec);
-
-static const io_uuid_spec_t bl32_uuid_spec = {
-	.uuid = UUID_SECURE_PAYLOAD_BL32,
-};
-
-static const io_uuid_spec_t bl32_extra1_uuid_spec = {
-	.uuid = UUID_SECURE_PAYLOAD_BL32_EXTRA1,
-};
-
-static const io_uuid_spec_t bl32_extra2_uuid_spec = {
-	.uuid = UUID_SECURE_PAYLOAD_BL32_EXTRA2,
-};
-
-static const io_uuid_spec_t bl33_uuid_spec = {
-	.uuid = UUID_NON_TRUSTED_FIRMWARE_BL33,
-};
-
-#if TRUSTED_BOARD_BOOT
-static const io_uuid_spec_t tb_fw_cert_uuid_spec = {
-	.uuid = UUID_TRUSTED_BOOT_FW_CERT,
-};
-
-static const io_uuid_spec_t trusted_key_cert_uuid_spec = {
-	.uuid = UUID_TRUSTED_KEY_CERT,
-};
-
-static const io_uuid_spec_t tos_fw_key_cert_uuid_spec = {
-	.uuid = UUID_TRUSTED_OS_FW_KEY_CERT,
-};
-
-static const io_uuid_spec_t tos_fw_cert_uuid_spec = {
-	.uuid = UUID_TRUSTED_OS_FW_CONTENT_CERT,
-};
-
-static const io_uuid_spec_t nt_fw_key_cert_uuid_spec = {
-	.uuid = UUID_NON_TRUSTED_FW_KEY_CERT,
-};
-
-static const io_uuid_spec_t nt_fw_cert_uuid_spec = {
-	.uuid = UUID_NON_TRUSTED_FW_CONTENT_CERT,
-};
-#endif /* TRUSTED_BOARD_BOOT */
-
-/* TODO: this structure is replicated multiple times. rationalize it ! */
-struct plat_io_policy {
-	uintptr_t *dev_handle;
-	uintptr_t image_spec;
-	int (*check)(const uintptr_t spec);
-};
-
-static const struct plat_io_policy policies[] = {
-#ifndef IMX7_FIP_MMAP
-	[FIP_IMAGE_ID] = {
-		&mmc_dev_handle,
-		(uintptr_t)&mmc_fip_spec,
-		open_mmc
-	},
-#else
-	[FIP_IMAGE_ID] = {
-		&memmap_dev_handle,
-		(uintptr_t)&fip_block_spec,
-		open_memmap
-	},
-#endif
-	[BL32_IMAGE_ID] = {
-		&fip_dev_handle,
-		(uintptr_t)&bl32_uuid_spec,
-		open_fip
-	},
-	[BL32_EXTRA1_IMAGE_ID] = {
-		&fip_dev_handle,
-		(uintptr_t)&bl32_extra1_uuid_spec,
-		open_fip
-	},
-	[BL32_EXTRA2_IMAGE_ID] = {
-		&fip_dev_handle,
-		(uintptr_t)&bl32_extra2_uuid_spec,
-		open_fip
-	},
-	[BL33_IMAGE_ID] = {
-		&fip_dev_handle,
-		(uintptr_t)&bl33_uuid_spec,
-		open_fip
-	},
-#if TRUSTED_BOARD_BOOT
-	[TRUSTED_BOOT_FW_CERT_ID] = {
-		&fip_dev_handle,
-		(uintptr_t)&tb_fw_cert_uuid_spec,
-		open_fip
-	},
-	[TRUSTED_KEY_CERT_ID] = {
-		&fip_dev_handle,
-		(uintptr_t)&trusted_key_cert_uuid_spec,
-		open_fip
-	},
-	[TRUSTED_OS_FW_KEY_CERT_ID] = {
-		&fip_dev_handle,
-		(uintptr_t)&tos_fw_key_cert_uuid_spec,
-		open_fip
-	},
-	[NON_TRUSTED_FW_KEY_CERT_ID] = {
-		&fip_dev_handle,
-		(uintptr_t)&nt_fw_key_cert_uuid_spec,
-		open_fip
-	},
-	[TRUSTED_OS_FW_CONTENT_CERT_ID] = {
-		&fip_dev_handle,
-		(uintptr_t)&tos_fw_cert_uuid_spec,
-		open_fip
-	},
-	[NON_TRUSTED_FW_CONTENT_CERT_ID] = {
-		&fip_dev_handle,
-		(uintptr_t)&nt_fw_cert_uuid_spec,
-		open_fip
-	},
-#endif /* TRUSTED_BOARD_BOOT */
-};
-
-static int open_fip(const uintptr_t spec)
-{
-	int result;
-	uintptr_t local_image_handle;
-
-	/* See if a Firmware Image Package is available */
-	result = io_dev_init(fip_dev_handle, (uintptr_t)FIP_IMAGE_ID);
-	if (result == 0) {
-		result = io_open(fip_dev_handle, spec, &local_image_handle);
-		if (result == 0) {
-			VERBOSE("Using FIP\n");
-			io_close(local_image_handle);
-		}
-	}
-	return result;
-}
-
-#ifndef IMX7_FIP_MMAP
-static int open_mmc(const uintptr_t spec)
-{
-	int result;
-	uintptr_t local_handle;
-
-	result = io_dev_init(mmc_dev_handle, (uintptr_t)NULL);
-	if (result == 0) {
-		result = io_open(mmc_dev_handle, spec, &local_handle);
-		if (result == 0)
-			io_close(local_handle);
-	}
-	return result;
-}
-#else
-static int open_memmap(const uintptr_t spec)
-{
-	int result;
-	uintptr_t local_image_handle;
-
-	result = io_dev_init(memmap_dev_handle, (uintptr_t)NULL);
-	if (result == 0) {
-		result = io_open(memmap_dev_handle, spec, &local_image_handle);
-		if (result == 0) {
-			VERBOSE("Using Memmap\n");
-			io_close(local_image_handle);
-		}
-	}
-	return result;
-}
-#endif
-
-int plat_get_image_source(unsigned int image_id, uintptr_t *dev_handle,
-			  uintptr_t *image_spec)
-{
-	int result;
-	const struct plat_io_policy *policy;
-
-	assert(image_id < ARRAY_SIZE(policies));
-
-	policy = &policies[image_id];
-	result = policy->check(policy->image_spec);
-	assert(result == 0);
-
-	*image_spec = policy->image_spec;
-	*dev_handle = *policy->dev_handle;
-
-	return result;
-}
-
-void plat_imx7_io_setup(void)
-{
-	int result __unused;
-
-#ifndef IMX7_FIP_MMAP
-	result = register_io_dev_block(&mmc_dev_con);
-	assert(result == 0);
-
-	result = io_dev_open(mmc_dev_con, (uintptr_t)&mmc_dev_spec,
-			     &mmc_dev_handle);
-	assert(result == 0);
-
-#else
-	result = register_io_dev_memmap(&memmap_dev_con);
-	assert(result == 0);
-
-	result = io_dev_open(memmap_dev_con, (uintptr_t)NULL,
-			     &memmap_dev_handle);
-	assert(result == 0);
-
-#endif
-	result = register_io_dev_fip(&fip_dev_con);
-	assert(result == 0);
-
-	result = io_dev_open(fip_dev_con, (uintptr_t)NULL,
-			     &fip_dev_handle);
-	assert(result == 0);
-}
diff --git a/plat/imx/imx7/include/imx7_def.h b/plat/imx/imx7/include/imx7_def.h
index 77a8ca3..d92a2d1 100644
--- a/plat/imx/imx7/include/imx7_def.h
+++ b/plat/imx/imx7/include/imx7_def.h
@@ -13,7 +13,7 @@
 /*******************************************************************************
  * Function and variable prototypes
  ******************************************************************************/
-void plat_imx7_io_setup(void);
+void plat_imx_io_setup(void);
 void imx7_platform_setup(u_register_t arg1, u_register_t arg2,
 			 u_register_t arg3, u_register_t arg4);
 
diff --git a/plat/imx/imx7/picopi/include/platform_def.h b/plat/imx/imx7/picopi/include/platform_def.h
index 141571c..5f2975d 100644
--- a/plat/imx/imx7/picopi/include/platform_def.h
+++ b/plat/imx/imx7/picopi/include/platform_def.h
@@ -92,12 +92,12 @@
 #define IMX7_UBOOT_LIMIT		(IMX7_UBOOT_BASE + IMX7_UBOOT_SIZE)
 
 /* Define FIP image absolute location 0x80000000 - 0x80100000 */
-#define IMX7_FIP_SIZE			0x00100000
-#define IMX7_FIP_BASE			(DRAM_BASE)
-#define IMX7_FIP_LIMIT			(IMX7_FIP_BASE + IMX7_FIP_SIZE)
+#define IMX_FIP_SIZE			0x00100000
+#define IMX_FIP_BASE			(DRAM_BASE)
+#define IMX_FIP_LIMIT			(IMX_FIP_BASE + IMX_FIP_SIZE)
 
 /* Define FIP image location at 1MB offset */
-#define IMX7_FIP_MMC_BASE		(1024 * 1024)
+#define IMX_FIP_MMC_BASE		(1024 * 1024)
 
 /* Define the absolute location of DTB 0x83000000 - 0x83100000 */
 #define IMX7_DTB_SIZE			0x00100000
diff --git a/plat/imx/imx7/warp7/include/platform_def.h b/plat/imx/imx7/warp7/include/platform_def.h
index 4afcb54..683e50d 100644
--- a/plat/imx/imx7/warp7/include/platform_def.h
+++ b/plat/imx/imx7/warp7/include/platform_def.h
@@ -94,12 +94,12 @@
 #define IMX7_UBOOT_LIMIT		(IMX7_UBOOT_BASE + IMX7_UBOOT_SIZE)
 
 /* Define FIP image absolute location 0x80000000 - 0x80100000 */
-#define IMX7_FIP_SIZE			0x00100000
-#define IMX7_FIP_BASE			(DRAM_BASE)
-#define IMX7_FIP_LIMIT			(IMX7_FIP_BASE + IMX7_FIP_SIZE)
+#define IMX_FIP_SIZE			0x00100000
+#define IMX_FIP_BASE			(DRAM_BASE)
+#define IMX_FIP_LIMIT			(IMX_FIP_BASE + IMX_FIP_SIZE)
 
 /* Define FIP image location at 1MB offset */
-#define IMX7_FIP_MMC_BASE		(1024 * 1024)
+#define IMX_FIP_MMC_BASE		(1024 * 1024)
 
 /* Define the absolute location of DTB 0x83000000 - 0x83100000 */
 #define IMX7_DTB_SIZE			0x00100000
diff --git a/plat/imx/imx8m/imx8mm/imx8mm_image_load.c b/plat/imx/imx8m/imx8m_image_load.c
similarity index 100%
rename from plat/imx/imx8m/imx8mm/imx8mm_image_load.c
rename to plat/imx/imx8m/imx8m_image_load.c
diff --git a/plat/imx/imx8m/imx8mm/imx8mm_bl2_el3_setup.c b/plat/imx/imx8m/imx8mm/imx8mm_bl2_el3_setup.c
index 937774c..c39dd93 100644
--- a/plat/imx/imx8m/imx8mm/imx8mm_bl2_el3_setup.c
+++ b/plat/imx/imx8m/imx8mm/imx8mm_bl2_el3_setup.c
@@ -88,7 +88,7 @@
 	imx8mm_usdhc_setup();
 
 	/* Open handles to a FIP image */
-	plat_imx8mm_io_setup();
+	plat_imx_io_setup();
 }
 
 void bl2_el3_plat_arch_setup(void)
diff --git a/plat/imx/imx8m/imx8mm/include/imx8mm_private.h b/plat/imx/imx8m/imx8mm/include/imx8mm_private.h
index 52d13f0..5e0ef97 100644
--- a/plat/imx/imx8m/imx8mm/include/imx8mm_private.h
+++ b/plat/imx/imx8m/imx8mm/include/imx8mm_private.h
@@ -10,6 +10,6 @@
 /*******************************************************************************
  * Function and variable prototypes
  ******************************************************************************/
-void plat_imx8mm_io_setup(void);
+void plat_imx_io_setup(void);
 
 #endif /* IMX8MM_PRIVATE_H */
diff --git a/plat/imx/imx8m/imx8mm/include/platform_def.h b/plat/imx/imx8m/imx8mm/include/platform_def.h
index 940d22b..e86938b 100644
--- a/plat/imx/imx8m/imx8mm/include/platform_def.h
+++ b/plat/imx/imx8m/imx8mm/include/platform_def.h
@@ -41,12 +41,12 @@
 #define BL2_LIMIT			U(0x940000)
 #define BL31_BASE			U(0x900000)
 #define BL31_LIMIT			U(0x920000)
-#define IMX8MM_FIP_BASE			U(0x40310000)
-#define IMX8MM_FIP_SIZE			U(0x000300000)
-#define IMX8MM_FIP_LIMIT		U(FIP_BASE + FIP_SIZE)
+#define IMX_FIP_BASE			U(0x40310000)
+#define IMX_FIP_SIZE			U(0x000300000)
+#define IMX_FIP_LIMIT			U(FIP_BASE + FIP_SIZE)
 
 /* Define FIP image location on eMMC */
-#define IMX8MM_FIP_MMC_BASE		U(0x100000)
+#define IMX_FIP_MMC_BASE		U(0x100000)
 
 #define PLAT_IMX8MM_BOOT_MMC_BASE	U(0x30B50000) /* SD */
 #else
diff --git a/plat/imx/imx8m/imx8mm/platform.mk b/plat/imx/imx8m/imx8mm/platform.mk
index 1863233..ac5a809 100644
--- a/plat/imx/imx8m/imx8mm/platform.mk
+++ b/plat/imx/imx8m/imx8mm/platform.mk
@@ -63,8 +63,8 @@
 				drivers/io/io_storage.c				\
 				drivers/imx/usdhc/imx_usdhc.c			\
 				plat/imx/imx8m/imx8mm/imx8mm_bl2_mem_params_desc.c	\
-				plat/imx/imx8m/imx8mm/imx8mm_io_storage.c		\
-				plat/imx/imx8m/imx8mm/imx8mm_image_load.c		\
+				plat/imx/common/imx_io_storage.c		\
+				plat/imx/imx8m/imx8m_image_load.c		\
 				lib/optee/optee_utils.c
 endif
 
diff --git a/plat/imx/imx8m/imx8mp/imx8mp_bl2_el3_setup.c b/plat/imx/imx8m/imx8mp/imx8mp_bl2_el3_setup.c
new file mode 100644
index 0000000..08cbeeb
--- /dev/null
+++ b/plat/imx/imx8m/imx8mp/imx8mp_bl2_el3_setup.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <stdbool.h>
+
+#include <arch_helpers.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <common/desc_image_load.h>
+#include <common/tbbr/tbbr_img_def.h>
+#include <context.h>
+#include <drivers/arm/tzc380.h>
+#include <drivers/console.h>
+#include <drivers/generic_delay_timer.h>
+#include <drivers/mmc.h>
+#include <lib/el3_runtime/context_mgmt.h>
+#include <lib/mmio.h>
+#include <lib/optee_utils.h>
+#include <lib/xlat_tables/xlat_tables_v2.h>
+
+#include <imx8m_caam.h>
+#include "imx8mp_private.h"
+#include <imx_aipstz.h>
+#include <imx_rdc.h>
+#include <imx_uart.h>
+#include <plat/common/platform.h>
+#include <plat_imx8.h>
+#include <platform_def.h>
+
+
+static const struct aipstz_cfg aipstz[] = {
+	{IMX_AIPSTZ1, 0x77777777, 0x77777777, .opacr = {0x0, 0x0, 0x0, 0x0, 0x0}, },
+	{IMX_AIPSTZ2, 0x77777777, 0x77777777, .opacr = {0x0, 0x0, 0x0, 0x0, 0x0}, },
+	{IMX_AIPSTZ3, 0x77777777, 0x77777777, .opacr = {0x0, 0x0, 0x0, 0x0, 0x0}, },
+	{IMX_AIPSTZ4, 0x77777777, 0x77777777, .opacr = {0x0, 0x0, 0x0, 0x0, 0x0}, },
+	{0},
+};
+
+void bl2_el3_early_platform_setup(u_register_t arg0, u_register_t arg1,
+		u_register_t arg2, u_register_t arg3)
+{
+	static console_t console;
+	unsigned int i;
+
+	/* Enable CSU NS access permission */
+	for (i = 0U; i < 64; i++) {
+		mmio_write_32(IMX_CSU_BASE + i * 4, 0x00ff00ff);
+	}
+
+	imx_aipstz_init(aipstz);
+
+	console_imx_uart_register(IMX_BOOT_UART_BASE, IMX_BOOT_UART_CLK_IN_HZ,
+		IMX_CONSOLE_BAUDRATE, &console);
+
+	generic_delay_timer_init();
+
+	/* select the CKIL source to 32K OSC */
+	mmio_write_32(IMX_ANAMIX_BASE + ANAMIX_MISC_CTL, 0x1);
+
+	/* Open handles to a FIP image */
+	plat_imx_io_setup();
+}
+
+void bl2_el3_plat_arch_setup(void)
+{
+}
+
+void bl2_platform_setup(void)
+{
+}
+
+int bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+	int err = 0;
+	bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
+	bl_mem_params_node_t *pager_mem_params = NULL;
+	bl_mem_params_node_t *paged_mem_params = NULL;
+
+	assert(bl_mem_params);
+
+	switch (image_id) {
+	case BL32_IMAGE_ID:
+		pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID);
+		assert(pager_mem_params);
+
+		paged_mem_params = get_bl_mem_params_node(BL32_EXTRA2_IMAGE_ID);
+		assert(paged_mem_params);
+
+		err = parse_optee_header(&bl_mem_params->ep_info,
+					 &pager_mem_params->image_info,
+					 &paged_mem_params->image_info);
+		if (err != 0) {
+			WARN("OPTEE header parse error.\n");
+		}
+
+		break;
+	default:
+		/* Do nothing in default case */
+		break;
+	}
+
+	return err;
+}
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+	return COUNTER_FREQUENCY;
+}
+
+void bl2_plat_runtime_setup(void)
+{
+	return;
+}
diff --git a/plat/imx/imx8m/imx8mp/imx8mp_bl2_mem_params_desc.c b/plat/imx/imx8m/imx8mp/imx8mp_bl2_mem_params_desc.c
new file mode 100644
index 0000000..f2f6808
--- /dev/null
+++ b/plat/imx/imx8m/imx8mp/imx8mp_bl2_mem_params_desc.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright (c) 2021, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <common/desc_image_load.h>
+#include <plat/common/platform.h>
+#include <platform_def.h>
+
+static bl_mem_params_node_t bl2_mem_params_descs[] = {
+	{
+		.image_id = BL31_IMAGE_ID,
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP, VERSION_2,
+				      entry_point_info_t,
+				      SECURE | EXECUTABLE | EP_FIRST_EXE),
+		.ep_info.pc = BL31_BASE,
+		.ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+					DISABLE_ALL_EXCEPTIONS),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP, VERSION_2, image_info_t,
+				      IMAGE_ATTRIB_PLAT_SETUP),
+		.image_info.image_base = BL31_BASE,
+		.image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
+	{
+		.image_id = BL32_IMAGE_ID,
+
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP, VERSION_2,
+				      entry_point_info_t,
+				      SECURE | EXECUTABLE),
+		.ep_info.pc = BL32_BASE,
+
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP, VERSION_2,
+				      image_info_t, 0),
+
+		.image_info.image_base = BL32_BASE,
+		.image_info.image_max_size = BL32_SIZE,
+
+		.next_handoff_image_id = BL33_IMAGE_ID,
+	},
+	{
+		.image_id = BL32_EXTRA1_IMAGE_ID,
+
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP, VERSION_2,
+				      entry_point_info_t,
+				      SECURE | NON_EXECUTABLE),
+
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP, VERSION_2,
+				      image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+		.image_info.image_base = BL32_BASE,
+		.image_info.image_max_size =  BL32_SIZE,
+
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
+	{
+		/* This is a zero sized image so we don't set base or size */
+		.image_id = BL32_EXTRA2_IMAGE_ID,
+
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+				      VERSION_2, entry_point_info_t,
+				      SECURE | NON_EXECUTABLE),
+
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+				      VERSION_2, image_info_t,
+				      IMAGE_ATTRIB_SKIP_LOADING),
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
+	{
+		.image_id = BL33_IMAGE_ID,
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP, VERSION_2,
+				      entry_point_info_t,
+				      NON_SECURE | EXECUTABLE),
+		# ifdef PRELOADED_BL33_BASE
+			.ep_info.pc = PLAT_NS_IMAGE_OFFSET,
+
+			SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+					      VERSION_2, image_info_t,
+					      IMAGE_ATTRIB_SKIP_LOADING),
+		# else
+			.ep_info.pc = PLAT_NS_IMAGE_OFFSET,
+
+			SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+					      VERSION_2, image_info_t, 0),
+			.image_info.image_base = PLAT_NS_IMAGE_OFFSET,
+			.image_info.image_max_size = PLAT_NS_IMAGE_SIZE,
+		# endif /* PRELOADED_BL33_BASE */
+
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	}
+};
+
+REGISTER_BL_IMAGE_DESCS(bl2_mem_params_descs);
diff --git a/plat/imx/imx8m/imx8mp/imx8mp_rotpk.S b/plat/imx/imx8m/imx8mp/imx8mp_rotpk.S
new file mode 100644
index 0000000..a4c7ce1
--- /dev/null
+++ b/plat/imx/imx8m/imx8mp/imx8mp_rotpk.S
@@ -0,0 +1,15 @@
+/*
+ * Copyright (c) 2021, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+	.global imx8mp_rotpk_hash
+	.global imx8mp_rotpk_hash_end
+imx8mp_rotpk_hash:
+	/* DER header */
+	.byte 0x30, 0x31, 0x30, 0x0D, 0x06, 0x09, 0x60, 0x86, 0x48
+	.byte 0x01, 0x65, 0x03, 0x04, 0x02, 0x01, 0x05, 0x00, 0x04, 0x20
+	/* SHA256 */
+	.incbin ROTPK_HASH
+imx8mp_rotpk_hash_end:
diff --git a/plat/imx/imx8m/imx8mp/imx8mp_trusted_boot.c b/plat/imx/imx8m/imx8mp/imx8mp_trusted_boot.c
new file mode 100644
index 0000000..5d1a6c2
--- /dev/null
+++ b/plat/imx/imx8m/imx8mp/imx8mp_trusted_boot.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2021, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <plat/common/platform.h>
+
+extern char imx8mp_rotpk_hash[], imx8mp_rotpk_hash_end[];
+
+int plat_get_rotpk_info(void *cookie, void **key_ptr, unsigned int *key_len,
+			unsigned int *flags)
+{
+	*key_ptr = imx8mp_rotpk_hash;
+	*key_len = imx8mp_rotpk_hash_end - imx8mp_rotpk_hash;
+	*flags = ROTPK_IS_HASH;
+
+	return 0;
+}
+
+int plat_get_nv_ctr(void *cookie, unsigned int *nv_ctr)
+{
+	*nv_ctr = 0;
+
+	return 0;
+}
+
+int plat_set_nv_ctr(void *cookie, unsigned int nv_ctr)
+{
+	return 1;
+}
+
+int plat_get_mbedtls_heap(void **heap_addr, size_t *heap_size)
+{
+	return get_mbedtls_heap_helper(heap_addr, heap_size);
+}
diff --git a/plat/imx/imx8m/imx8mp/include/imx8mp_private.h b/plat/imx/imx8m/imx8mp/include/imx8mp_private.h
new file mode 100644
index 0000000..0a02334
--- /dev/null
+++ b/plat/imx/imx8m/imx8mp/include/imx8mp_private.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (c) 2021, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef IMX8MP_PRIVATE_H
+#define IMX8MP_PRIVATE_H
+
+/*******************************************************************************
+ * Function and variable prototypes
+ ******************************************************************************/
+void plat_imx_io_setup(void);
+
+#endif /* IMX8MP_PRIVATE_H */
diff --git a/plat/imx/imx8m/imx8mp/include/platform_def.h b/plat/imx/imx8m/imx8mp/include/platform_def.h
index 832bed1..14b7ea0 100644
--- a/plat/imx/imx8m/imx8mp/include/platform_def.h
+++ b/plat/imx/imx8m/imx8mp/include/platform_def.h
@@ -6,6 +6,7 @@
 #ifndef PLATFORM_DEF_H
 #define PLATFORM_DEF_H
 
+#include <common/tbbr/tbbr_img_def.h>
 #include <lib/utils_def.h>
 #include <lib/xlat_tables/xlat_tables_v2.h>
 
@@ -34,8 +35,23 @@
 #define PLAT_WAIT_RET_STATE		U(1)
 #define PLAT_STOP_OFF_STATE		U(3)
 
+#if defined(NEED_BL2)
+#define BL2_BASE			U(0x960000)
+#define BL2_LIMIT			U(0x980000)
+#define BL31_BASE			U(0x940000)
+#define BL31_LIMIT			U(0x960000)
+#define IMX_FIP_BASE			U(0x40310000)
+#define IMX_FIP_SIZE			U(0x000300000)
+#define IMX_FIP_LIMIT			U(FIP_BASE + FIP_SIZE)
+
+/* Define FIP image location on eMMC */
+#define IMX_FIP_MMC_BASE		U(0x100000)
+
+#define PLAT_IMX8MP_BOOT_MMC_BASE	U(0x30B50000) /* SD */
+#else
 #define BL31_BASE			U(0x960000)
 #define BL31_LIMIT			U(0x980000)
+#endif
 
 #define PLAT_PRI_BITS			U(3)
 #define PLAT_SDEI_CRITICAL_PRI		0x10
@@ -44,6 +60,7 @@
 
 /* non-secure uboot base */
 #define PLAT_NS_IMAGE_OFFSET		U(0x40200000)
+#define PLAT_NS_IMAGE_SIZE		U(0x00200000)
 
 /* GICv3 base address */
 #define PLAT_GICD_BASE			U(0x38800000)
@@ -150,6 +167,10 @@
 
 #define IMX_WDOG_B_RESET
 
+#define MAX_IO_HANDLES			3U
+#define MAX_IO_DEVICES			2U
+#define MAX_IO_BLOCK_DEVICES		1U
+
 #define GIC_MAP		MAP_REGION_FLAT(IMX_GIC_BASE, IMX_GIC_SIZE, MT_DEVICE | MT_RW)
 #define AIPS_MAP	MAP_REGION_FLAT(IMX_AIPS_BASE, IMX_AIPS_SIZE, MT_DEVICE | MT_RW) /* AIPS map */
 #define OCRAM_S_MAP	MAP_REGION_FLAT(OCRAM_S_BASE, OCRAM_S_SIZE, MT_MEMORY | MT_RW) /* OCRAM_S */
diff --git a/plat/imx/imx8m/imx8mp/platform.mk b/plat/imx/imx8m/imx8mp/platform.mk
index 6be2f98..823b5d6 100644
--- a/plat/imx/imx8m/imx8mp/platform.mk
+++ b/plat/imx/imx8m/imx8mp/platform.mk
@@ -6,7 +6,9 @@
 
 PLAT_INCLUDES		:=	-Iplat/imx/common/include		\
 				-Iplat/imx/imx8m/include		\
-				-Iplat/imx/imx8m/imx8mp/include
+				-Iplat/imx/imx8m/imx8mp/include		\
+				-Idrivers/imx/usdhc			\
+				-Iinclude/common/tbbr
 # Translation tables library
 include lib/xlat_tables_v2/xlat_tables.mk
 
@@ -40,6 +42,96 @@
 				${IMX_GIC_SOURCES}				\
 				${XLAT_TABLES_LIB_SRCS}
 
+ifeq (${NEED_BL2},yes)
+BL2_SOURCES		+=	common/desc_image_load.c			\
+				plat/imx/common/imx8_helpers.S			\
+				plat/imx/common/imx_uart_console.S		\
+				plat/imx/imx8m/imx8mp/imx8mp_bl2_el3_setup.c	\
+				plat/imx/imx8m/imx8mp/gpc.c			\
+				plat/imx/imx8m/imx_aipstz.c			\
+				plat/imx/imx8m/imx_rdc.c			\
+				plat/imx/imx8m/imx8m_caam.c			\
+				plat/common/plat_psci_common.c			\
+				lib/cpus/aarch64/cortex_a53.S			\
+				drivers/arm/tzc/tzc380.c			\
+				drivers/delay_timer/delay_timer.c		\
+				drivers/delay_timer/generic_delay_timer.c	\
+				${PLAT_GIC_SOURCES}				\
+				${PLAT_DRAM_SOURCES}				\
+				${XLAT_TABLES_LIB_SRCS}				\
+				drivers/mmc/mmc.c				\
+				drivers/io/io_block.c				\
+				drivers/io/io_fip.c				\
+				drivers/io/io_memmap.c				\
+				drivers/io/io_storage.c				\
+				drivers/imx/usdhc/imx_usdhc.c			\
+				plat/imx/imx8m/imx8mp/imx8mp_bl2_mem_params_desc.c	\
+				plat/imx/common/imx_io_storage.c		\
+				plat/imx/imx8m/imx8m_image_load.c		\
+				lib/optee/optee_utils.c
+endif
+
+# Add the build options to pack BLx images and kernel device tree
+# in the FIP if the platform requires.
+ifneq ($(BL2),)
+RESET_TO_BL31		:=	0
+$(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/tb_fw.crt,--tb-fw-cert))
+endif
+ifneq ($(BL32_EXTRA1),)
+$(eval $(call TOOL_ADD_IMG,BL32_EXTRA1,--tos-fw-extra1))
+endif
+ifneq ($(BL32_EXTRA2),)
+$(eval $(call TOOL_ADD_IMG,BL32_EXTRA2,--tos-fw-extra2))
+endif
+ifneq ($(HW_CONFIG),)
+$(eval $(call TOOL_ADD_IMG,HW_CONFIG,--hw-config))
+endif
+
+ifeq (${NEED_BL2},yes)
+$(eval $(call add_define,NEED_BL2))
+LOAD_IMAGE_V2		:=	1
+# Non-TF Boot ROM
+BL2_AT_EL3		:=	1
+endif
+
+ifneq (${TRUSTED_BOARD_BOOT},0)
+
+include drivers/auth/mbedtls/mbedtls_crypto.mk
+include drivers/auth/mbedtls/mbedtls_x509.mk
+
+AUTH_SOURCES	:=	drivers/auth/auth_mod.c			\
+			drivers/auth/crypto_mod.c		\
+			drivers/auth/img_parser_mod.c		\
+			drivers/auth/tbbr/tbbr_cot_common.c     \
+			drivers/auth/tbbr/tbbr_cot_bl2.c
+
+BL2_SOURCES		+=	${AUTH_SOURCES}					\
+				plat/common/tbbr/plat_tbbr.c			\
+				plat/imx/imx8m/imx8mp/imx8mp_trusted_boot.c	\
+				plat/imx/imx8m/imx8mp/imx8mp_rotpk.S
+
+ROT_KEY             = $(BUILD_PLAT)/rot_key.pem
+ROTPK_HASH          = $(BUILD_PLAT)/rotpk_sha256.bin
+
+$(eval $(call add_define_val,ROTPK_HASH,'"$(ROTPK_HASH)"'))
+$(eval $(call MAKE_LIB_DIRS))
+
+$(BUILD_PLAT)/bl2/imx8mp_rotpk.o: $(ROTPK_HASH)
+
+certificates: $(ROT_KEY)
+
+$(ROT_KEY): | $(BUILD_PLAT)
+	@echo "  OPENSSL $@"
+	@if [ ! -f $(ROT_KEY) ]; then \
+		openssl genrsa 2048 > $@ 2>/dev/null; \
+	fi
+
+$(ROTPK_HASH): $(ROT_KEY)
+	@echo "  OPENSSL $@"
+	$(Q)openssl rsa -in $< -pubout -outform DER 2>/dev/null |\
+	openssl dgst -sha256 -binary > $@ 2>/dev/null
+endif
+
 USE_COHERENT_MEM	:=	1
 RESET_TO_BL31		:=	1
 A53_DISABLE_NON_TEMPORAL_HINT := 0
diff --git a/plat/mediatek/mt8195/drivers/spm/mt_spm_vcorefs.c b/plat/mediatek/mt8195/drivers/spm/mt_spm_vcorefs.c
index 2a9a789..6a85b5c 100644
--- a/plat/mediatek/mt8195/drivers/spm/mt_spm_vcorefs.c
+++ b/plat/mediatek/mt8195/drivers/spm/mt_spm_vcorefs.c
@@ -465,13 +465,17 @@
 	switch (gear) {
 	case 3:
 		ret_val = vcore_opp_0_uv;
+		break;
 	case 2:
 		ret_val = vcore_opp_1_uv;
+		break;
 	case 1:
 		ret_val = vcore_opp_2_uv;
+		break;
 	case 0:
 	default:
 		ret_val = vcore_opp_3_uv;
+		break;
 	}
 	return ret_val;
 }
diff --git a/plat/nxp/common/include/default/ch_3_2/soc_default_base_addr.h b/plat/nxp/common/include/default/ch_3_2/soc_default_base_addr.h
index 08300b0..0a4228b 100644
--- a/plat/nxp/common/include/default/ch_3_2/soc_default_base_addr.h
+++ b/plat/nxp/common/include/default/ch_3_2/soc_default_base_addr.h
@@ -23,6 +23,9 @@
 /* MMU 500 soc.c*/
 #define NXP_SMMU_ADDR			0x05000000
 
+/* CCI400 base address */
+#define NXP_CCI_ADDR			0x04090000
+
 #define NXP_SNVS_ADDR			0x01E90000
 
 #define NXP_DCFG_ADDR			0x01E00000
@@ -81,4 +84,5 @@
 #define NXP_CCN_HNI_ADDR		0x04080000
 #define NXP_CCN_HN_F_0_ADDR		0x04200000
 
+#define NXP_EPU_ADDR			0x700060000
 #endif	/*	SOC_DEFAULT_BASE_ADDR_H		*/
diff --git a/plat/nxp/common/include/default/ch_3_2/soc_default_helper_macros.h b/plat/nxp/common/include/default/ch_3_2/soc_default_helper_macros.h
index cdc823a..8de516e 100644
--- a/plat/nxp/common/include/default/ch_3_2/soc_default_helper_macros.h
+++ b/plat/nxp/common/include/default/ch_3_2/soc_default_helper_macros.h
@@ -39,6 +39,10 @@
 
 #endif /* NXP_RESET_ADDR */
 
+/* secmon register offsets and bitfields */
+#define SECMON_HPCOMR_OFFSET	0x4
+#define SECMON_HPCOMR_NPSWAEN	0x80000000
+
 /* Secure-Register-File register offsets and bit masks */
 #ifdef NXP_RST_ADDR
 /* Register Offset */
diff --git a/plat/nxp/common/include/default/plat_default_def.h b/plat/nxp/common/include/default/plat_default_def.h
index dd5dfe0..43320bb 100644
--- a/plat/nxp/common/include/default/plat_default_def.h
+++ b/plat/nxp/common/include/default/plat_default_def.h
@@ -40,8 +40,12 @@
 #define NXP_NS_DRAM_ADDR	NXP_DRAM0_ADDR
 #endif
 
-/* 64M is reserved for Secure memory
- */
+/* 1 MB is reserved for dma of sd */
+#ifndef NXP_SD_BLOCK_BUF_SIZE
+#define NXP_SD_BLOCK_BUF_SIZE	(1 * 1024 * 1024)
+#endif
+
+/* 64MB is reserved for Secure memory */
 #ifndef NXP_SECURE_DRAM_SIZE
 #define NXP_SECURE_DRAM_SIZE	(64 * 1024 * 1024)
 #endif
@@ -57,18 +61,22 @@
 				(NXP_SECURE_DRAM_SIZE + NXP_SP_SHRD_DRAM_SIZE))
 #endif
 
+#ifndef NXP_SD_BLOCK_BUF_ADDR
+#define NXP_SD_BLOCK_BUF_ADDR	(NXP_NS_DRAM_ADDR)
+#endif
+
 #ifndef NXP_SECURE_DRAM_ADDR
 #ifdef TEST_BL31
 #define NXP_SECURE_DRAM_ADDR 0
 #else
 #define NXP_SECURE_DRAM_ADDR	(NXP_NS_DRAM_ADDR + PLAT_DEF_DRAM0_SIZE - \
-				(NXP_SECURE_DRAM_SIZE  + NXP_SP_SHRD_DRAM_SIZE))
+				(NXP_SECURE_DRAM_SIZE + NXP_SP_SHRD_DRAM_SIZE))
 #endif
 #endif
 
 #ifndef NXP_SP_SHRD_DRAM_ADDR
-#define NXP_SP_SHRD_DRAM_ADDR	(NXP_NS_DRAM_ADDR + PLAT_DEF_DRAM0_SIZE \
-				- NXP_SP_SHRD_DRAM_SIZE)
+#define NXP_SP_SHRD_DRAM_ADDR	(NXP_NS_DRAM_ADDR + PLAT_DEF_DRAM0_SIZE - \
+				NXP_SP_SHRD_DRAM_SIZE)
 #endif
 
 #ifndef BL31_BASE
diff --git a/plat/nxp/common/psci/aarch64/psci_utils.S b/plat/nxp/common/psci/aarch64/psci_utils.S
index ea2abbf..ec69aea 100644
--- a/plat/nxp/common/psci/aarch64/psci_utils.S
+++ b/plat/nxp/common/psci/aarch64/psci_utils.S
@@ -1,6 +1,6 @@
 
 /*
- * Copyright 2018-2020 NXP
+ * Copyright 2018-2021 NXP
  *
  * SPDX-License-Identifier: BSD-3-Clause
  *
@@ -234,7 +234,7 @@
 	msr DAIFSet, #0xF
 
 	/* read cpuectlr and save current value */
-	mrs   x4, CORTEX_A72_ECTLR_EL1
+	mrs   x4, CPUECTLR_EL1
 	mov   x1, #CPUECTLR_DATA
 	mov   x2, x4
 	mov   x0, x10
@@ -242,7 +242,7 @@
 
 	/* remove the core from coherency */
 	bic   x4, x4, #CPUECTLR_SMPEN_MASK
-	msr   CORTEX_A72_ECTLR_EL1, x4
+	msr   CPUECTLR_EL1, x4
 
 	/* save scr_el3 */
 	mov  x0, x10
@@ -339,7 +339,7 @@
 	mov   x1, #CPUECTLR_DATA
 	bl    _getCoreData
 	orr   x0, x0, #CPUECTLR_SMPEN_MASK
-	msr   CORTEX_A72_ECTLR_EL1, x0
+	msr   CPUECTLR_EL1, x0
 
 	/* x4 = core mask */
 
@@ -563,7 +563,7 @@
 	/* save cpuectlr */
 	mov  x0, x6
 	mov  x1, #CPUECTLR_DATA
-	mrs  x2, CORTEX_A72_ECTLR_EL1
+	mrs  x2, CPUECTLR_EL1
 	bl   _setCoreData
 
 	/* x6 = core mask */
@@ -640,7 +640,7 @@
 	bl   _getCoreData
 	/* make sure smp is set */
 	orr  x0, x0, #CPUECTLR_SMPEN_MASK
-	msr  CORTEX_A72_ECTLR_EL1, x0
+	msr  CPUECTLR_EL1, x0
 
 	/* x5 = core mask */
 
@@ -780,13 +780,13 @@
 	/* save cpuectlr */
 	mov  x0, x6
 	mov  x1, #CPUECTLR_DATA
-	mrs  x2, CORTEX_A72_ECTLR_EL1
+	mrs  x2, CPUECTLR_EL1
 	mov  x4, x2
 	bl   _setCoreData
 
 	/* remove core from coherency */
 	bic   x4, x4, #CPUECTLR_SMPEN_MASK
-	msr   CORTEX_A72_ECTLR_EL1, x4
+	msr   CPUECTLR_EL1, x4
 
 	/* x6 = core mask */
 
@@ -844,7 +844,7 @@
 	bl   _getCoreData
 	/* make sure smp is set */
 	orr  x0, x0, #CPUECTLR_SMPEN_MASK
-	msr  CORTEX_A72_ECTLR_EL1, x0
+	msr  CPUECTLR_EL1, x0
 
 	/* x4 = core mask */
 
@@ -985,13 +985,13 @@
 	/* save cpuectlr */
 	mov  x0, x6
 	mov  x1, #CPUECTLR_DATA
-	mrs  x2, CORTEX_A72_ECTLR_EL1
+	mrs  x2, CPUECTLR_EL1
 	mov  x4, x2
 	bl   _setCoreData
 
 	/* remove core from coherency */
 	bic   x4, x4, #CPUECTLR_SMPEN_MASK
-	msr   CORTEX_A72_ECTLR_EL1, x4
+	msr   CPUECTLR_EL1, x4
 
 	/* x6 = core mask */
 
@@ -1071,7 +1071,7 @@
 
 	/* make sure smp is set */
 	orr  x0, x0, #CPUECTLR_SMPEN_MASK
-	msr  CORTEX_A72_ECTLR_EL1, x0
+	msr  CPUECTLR_EL1, x0
 
 	/* x4 = core mask */
 
diff --git a/plat/nxp/common/psci/include/plat_psci.h b/plat/nxp/common/psci/include/plat_psci.h
index 97d4c97..7fc48fb 100644
--- a/plat/nxp/common/psci/include/plat_psci.h
+++ b/plat/nxp/common/psci/include/plat_psci.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2018-2020 NXP
+ * Copyright 2018-2021 NXP
  *
  * SPDX-License-Identifier: BSD-3-Clause
  *
@@ -7,6 +7,8 @@
 
 #ifndef PLAT_PSCI_H
 #define PLAT_PSCI_H
+#include <cortex_a53.h>
+#include <cortex_a72.h>
 
  /* core abort current op */
 #define CORE_ABORT_OP     0x1
@@ -55,6 +57,7 @@
 #define  CPUECTLR_RET_SET       0x2
 #define  CPUECTLR_TIMER_MASK    0x7
 #define  CPUECTLR_TIMER_8TICKS  0x2
+#define  CPUECTLR_TIMER_2TICKS  0x1
 #define  SCR_IRQ_MASK           0x2
 #define  SCR_FIQ_MASK           0x4
 
@@ -62,18 +65,53 @@
  *   value == 0x0, the soc code does not support this feature
  *   value != 0x0, the soc code supports this feature
  */
+#ifndef SOC_CORE_RELEASE
 #define SOC_CORE_RELEASE      0x1
+#endif
+
+#ifndef SOC_CORE_RESTART
 #define SOC_CORE_RESTART      0x1
+#endif
+
+#ifndef SOC_CORE_OFF
 #define SOC_CORE_OFF          0x1
+#endif
+
+#ifndef SOC_CORE_STANDBY
 #define SOC_CORE_STANDBY      0x1
+#endif
+
+#ifndef SOC_CORE_PWR_DWN
 #define SOC_CORE_PWR_DWN      0x1
+#endif
+
+#ifndef SOC_CLUSTER_STANDBY
 #define SOC_CLUSTER_STANDBY   0x1
+#endif
+
+#ifndef SOC_CLUSTER_PWR_DWN
 #define SOC_CLUSTER_PWR_DWN   0x1
+#endif
+
+#ifndef SOC_SYSTEM_STANDBY
 #define SOC_SYSTEM_STANDBY    0x1
+#endif
+
+#ifndef SOC_SYSTEM_PWR_DWN
 #define SOC_SYSTEM_PWR_DWN    0x1
+#endif
+
+#ifndef SOC_SYSTEM_OFF
 #define SOC_SYSTEM_OFF        0x1
+#endif
+
+#ifndef SOC_SYSTEM_RESET
 #define SOC_SYSTEM_RESET      0x1
+#endif
+
+#ifndef SOC_SYSTEM_RESET2
 #define SOC_SYSTEM_RESET2     0x1
+#endif
 
 #ifndef __ASSEMBLER__
 
diff --git a/plat/nxp/common/setup/core.mk b/plat/nxp/common/setup/core.mk
index 9b81f2d..82ce30e 100644
--- a/plat/nxp/common/setup/core.mk
+++ b/plat/nxp/common/setup/core.mk
@@ -1,4 +1,4 @@
-# Copyright 2018-2020 NXP
+# Copyright 2018-2021 NXP
 #
 # SPDX-License-Identifier: BSD-3-Clause
 #
@@ -11,9 +11,11 @@
 
 CPU_LIBS		:=	lib/cpus/${ARCH}/aem_generic.S
 
-ifeq (,$(filter $(CORE_TYPE),a53 a55 a57 a72 a75))
+ifeq (,$(filter $(CORE_TYPE),a53 a72))
 $(error "CORE_TYPE not specified or incorrect")
 else
+UPPER_CORE_TYPE=$(shell echo $(CORE_TYPE) | tr a-z A-Z)
+$(eval $(call add_define_val,CPUECTLR_EL1,CORTEX_$(UPPER_CORE_TYPE)_ECTLR_EL1))
 CPU_LIBS		+=	lib/cpus/${ARCH}/cortex_$(CORE_TYPE).S
 endif
 
diff --git a/plat/nxp/soc-ls1028a/aarch64/ls1028a.S b/plat/nxp/soc-ls1028a/aarch64/ls1028a.S
new file mode 100644
index 0000000..404c39e
--- /dev/null
+++ b/plat/nxp/soc-ls1028a/aarch64/ls1028a.S
@@ -0,0 +1,1387 @@
+/*
+ * Copyright 2018-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+	.section .text, "ax"
+
+#include <asm_macros.S>
+
+#include <lib/psci/psci.h>
+#include <nxp_timer.h>
+#include <plat_gic.h>
+#include <pmu.h>
+
+#include <bl31_data.h>
+#include <plat_psci.h>
+#include <platform_def.h>
+
+	.global soc_init_lowlevel
+	.global soc_init_percpu
+	.global _set_platform_security
+	.global _soc_set_start_addr
+
+	.global _soc_core_release
+	.global _soc_ck_disabled
+	.global _soc_core_restart
+	.global _soc_core_prep_off
+	.global _soc_core_entr_off
+	.global _soc_core_exit_off
+	.global _soc_sys_reset
+	.global _soc_sys_off
+	.global _soc_core_prep_stdby
+	.global _soc_core_entr_stdby
+	.global _soc_core_exit_stdby
+	.global _soc_core_prep_pwrdn
+	.global _soc_core_entr_pwrdn
+	.global _soc_core_exit_pwrdn
+	.global _soc_clstr_prep_stdby
+	.global _soc_clstr_exit_stdby
+	.global _soc_clstr_prep_pwrdn
+	.global _soc_clstr_exit_pwrdn
+	.global _soc_sys_prep_stdby
+	.global _soc_sys_exit_stdby
+	.global _soc_sys_prep_pwrdn
+	.global _soc_sys_pwrdn_wfi
+	.global _soc_sys_exit_pwrdn
+
+	.equ TZPCDECPROT_0_SET_BASE, 0x02200804
+	.equ TZPCDECPROT_1_SET_BASE, 0x02200810
+	.equ TZPCDECPROT_2_SET_BASE, 0x0220081C
+
+	.equ TZASC_REGION_ATTRIBUTES_0_0, 0x01100110
+
+/*
+ * This function initialize the soc.
+ * in: void
+ * out: void
+ * uses x0 - x11
+ */
+func soc_init_lowlevel
+	/*
+	 * Called from C, so save the non-volatile regs
+	 * save these as pairs of registers to maintain the
+	 * required 16-byte alignment on the stack
+	 */
+	stp	x4,  x5,  [sp, #-16]!
+	stp	x6,  x7,  [sp, #-16]!
+	stp	x8,  x9,  [sp, #-16]!
+	stp	x10, x11, [sp, #-16]!
+	stp	x12, x13, [sp, #-16]!
+	stp	x18, x30, [sp, #-16]!
+
+	/*
+	 * Make sure the personality has been established by releasing cores
+	 * that are marked "to-be-disabled" from reset
+	 */
+	bl	release_disabled  /* 0-8 */
+
+	/* Set SCRATCHRW7 to 0x0 */
+	ldr	x0, =DCFG_SCRATCHRW7_OFFSET
+	mov	x1, xzr
+	bl	_write_reg_dcfg
+
+	/* Restore the aarch32/64 non-volatile registers */
+	ldp	x18, x30, [sp], #16
+	ldp	x12, x13, [sp], #16
+	ldp	x10, x11, [sp], #16
+	ldp	x8,  x9,  [sp], #16
+	ldp	x6,  x7,  [sp], #16
+	ldp	x4,  x5,  [sp], #16
+	ret
+endfunc soc_init_lowlevel
+
+/*
+ * void soc_init_percpu(void)
+ *
+ * This function performs any soc-specific initialization that is needed on
+ * a per-core basis
+ * in:  none
+ * out: none
+ * uses x0 - x3
+ */
+func soc_init_percpu
+	stp	x4,  x30,  [sp, #-16]!
+
+	bl	plat_my_core_mask
+	mov	x2, x0
+
+	/* x2 = core mask */
+
+	/* see if this core is marked for prefetch disable */
+	mov	x0, #PREFETCH_DIS_OFFSET
+	bl	_get_global_data  /* 0-1 */
+	tst	x0, x2
+	b.eq	1f
+	bl	_disable_ldstr_pfetch_A72  /* 0 */
+1:
+	mov	x0, #NXP_PMU_ADDR
+	bl	enable_timer_base_to_cluster
+
+	ldp	x4,  x30,  [sp], #16
+	ret
+endfunc soc_init_percpu
+
+/*
+ * This function determines if a core is disabled via COREDISABLEDSR
+ * in:  w0  = core_mask_lsb
+ * out: w0  = 0, core not disabled
+ *      w0 != 0, core disabled
+ * uses x0, x1
+ */
+func _soc_ck_disabled
+	/* get base addr of dcfg block */
+	ldr	x1, =NXP_DCFG_ADDR
+
+	/* read COREDISABLEDSR */
+	ldr	w1, [x1, #DCFG_COREDISABLEDSR_OFFSET]
+
+	/* test core bit */
+	and	w0, w1, w0
+
+	ret
+endfunc _soc_ck_disabled
+
+/*
+ * This function sets the security mechanisms in the SoC to implement the
+ * Platform Security Policy
+ */
+func _set_platform_security
+	mov	x3, x30
+
+#if (!SUPPRESS_TZC)
+	/* initialize the tzpc */
+	bl	init_tzpc
+#endif
+
+#if (!SUPPRESS_SEC)
+	/* initialize secmon */
+	bl	initSecMon
+#endif
+
+	mov	x30, x3
+	ret
+endfunc _set_platform_security
+
+/*
+ * Part of CPU_ON
+ *
+ * This function releases a secondary core from reset
+ * in:   x0 = core_mask_lsb
+ * out:  none
+ * uses: x0 - x3
+ */
+_soc_core_release:
+	mov	x3, x30
+
+	/*
+	 * Write to CORE_HOLD to tell the bootrom that we want this core
+	 * to run
+	 */
+	ldr	x1, =NXP_SEC_REGFILE_ADDR
+	str	w0, [x1, #CORE_HOLD_OFFSET]
+
+	/* Read-modify-write BRRL to release core */
+	mov	x1, #NXP_RESET_ADDR
+	ldr	w2, [x1, #BRR_OFFSET]
+	orr	w2, w2, w0
+	str	w2, [x1, #BRR_OFFSET]
+	dsb	sy
+	isb
+
+	/* Send event */
+	sev
+	isb
+
+	mov	x30, x3
+	ret
+
+/*
+ * This function writes a 64-bit address to bootlocptrh/l
+ * in:  x0, 64-bit address to write to BOOTLOCPTRL/H
+ * uses x0, x1, x2
+ */
+func _soc_set_start_addr
+	/* Get the 64-bit base address of the dcfg block */
+	ldr	x2, =NXP_DCFG_ADDR
+
+	/* Write the 32-bit BOOTLOCPTRL register */
+	mov	x1, x0
+	str	w1, [x2, #DCFG_BOOTLOCPTRL_OFFSET]
+
+	/* Write the 32-bit BOOTLOCPTRH register */
+	lsr	x1, x0, #32
+	str	w1, [x2, #DCFG_BOOTLOCPTRH_OFFSET]
+	ret
+endfunc _soc_set_start_addr
+
+/*
+ * Part of CPU_ON
+ *
+ * This function restarts a core shutdown via _soc_core_entr_off
+ * in:  x0 = core mask lsb (of the target cpu)
+ * out: x0 == 0, on success
+ *      x0 != 0, on failure
+ * uses x0 - x6
+ */
+_soc_core_restart:
+	mov	x6, x30
+	mov	x4, x0
+
+	/* pgm GICD_CTLR - enable secure grp0  */
+	mov	x5, #NXP_GICD_ADDR
+	ldr	w2, [x5, #GICD_CTLR_OFFSET]
+	orr	w2, w2, #GICD_CTLR_EN_GRP_0
+	str	w2, [x5, #GICD_CTLR_OFFSET]
+	dsb	sy
+	isb
+
+	/* Poll on RWP til write completes */
+4:
+	ldr	w2, [x5, #GICD_CTLR_OFFSET]
+	tst	w2, #GICD_CTLR_RWP
+	b.ne	4b
+
+	/*
+	 * x4 = core mask lsb
+	 * x5 = gicd base addr
+	 */
+
+	mov	x0, x4
+	bl	get_mpidr_value
+
+	/* Generate target list bit */
+	and	x1, x0, #MPIDR_AFFINITY0_MASK
+	mov	x2, #1
+	lsl	x2, x2, x1
+
+	/* Get the affinity1 field */
+	and	x1, x0, #MPIDR_AFFINITY1_MASK
+	lsl	x1, x1, #8
+	orr	x2, x2, x1
+
+	/* Insert the INTID for SGI15 */
+	orr	x2, x2, #ICC_SGI0R_EL1_INTID
+
+	/* Fire the SGI */
+	msr	ICC_SGI0R_EL1, x2
+	dsb	sy
+	isb
+
+	/* Load '0' on success */
+	mov	x0, xzr
+
+	mov	x30, x6
+	ret
+
+/*
+ * Part of CPU_OFF
+ *
+ * This function programs SoC & GIC registers in preparation for shutting down
+ * the core
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses x0 - x7
+ */
+_soc_core_prep_off:
+	mov	x8, x30
+	mov	x7, x0
+
+	/* x7 = core mask lsb */
+
+	mrs	x1, CPUECTLR_EL1
+
+	/* Set smp and disable L2 snoops in cpuectlr */
+	orr	x1, x1, #CPUECTLR_SMPEN_EN
+	orr	x1, x1, #CPUECTLR_DISABLE_TWALK_PREFETCH
+	bic	x1, x1, #CPUECTLR_INS_PREFETCH_MASK
+	bic	x1, x1, #CPUECTLR_DAT_PREFETCH_MASK
+
+	/* Set retention control in cpuectlr */
+	bic	x1, x1, #CPUECTLR_TIMER_MASK
+	orr	x1, x1, #CPUECTLR_TIMER_2TICKS
+	msr	CPUECTLR_EL1, x1
+
+	/* Get redistributor rd base addr for this core */
+	mov	x0, x7
+	bl	get_gic_rd_base
+	mov	x6, x0
+
+	/* Get redistributor sgi base addr for this core */
+	mov	x0, x7
+	bl	get_gic_sgi_base
+	mov	x5, x0
+
+	/*
+	 * x5 = gicr sgi base addr
+	 * x6 = gicr rd  base addr
+	 * x7 = core mask lsb
+	 */
+
+	/* Disable SGI 15 at redistributor - GICR_ICENABLER0 */
+	mov	w3, #GICR_ICENABLER0_SGI15
+	str	w3, [x5, #GICR_ICENABLER0_OFFSET]
+2:
+	/* Poll on rwp bit in GICR_CTLR */
+	ldr	w4, [x6, #GICR_CTLR_OFFSET]
+	tst	w4, #GICR_CTLR_RWP
+	b.ne	2b
+
+	/* Disable GRP1 interrupts at cpu interface */
+	msr	ICC_IGRPEN1_EL3, xzr
+
+	/* Disable GRP0 ints at cpu interface */
+	msr	ICC_IGRPEN0_EL1, xzr
+
+	/* Program the redistributor - poll on GICR_CTLR.RWP as needed */
+
+	/* Define SGI 15 as Grp0 - GICR_IGROUPR0 */
+	ldr	w4, [x5, #GICR_IGROUPR0_OFFSET]
+	bic	w4, w4, #GICR_IGROUPR0_SGI15
+	str	w4, [x5, #GICR_IGROUPR0_OFFSET]
+
+	/* Define SGI 15 as Grp0 - GICR_IGRPMODR0 */
+	ldr	w3, [x5, #GICR_IGRPMODR0_OFFSET]
+	bic	w3, w3, #GICR_IGRPMODR0_SGI15
+	str	w3, [x5, #GICR_IGRPMODR0_OFFSET]
+
+	/* Set priority of SGI 15 to highest (0x0) - GICR_IPRIORITYR3 */
+	ldr	w4, [x5, #GICR_IPRIORITYR3_OFFSET]
+	bic	w4, w4, #GICR_IPRIORITYR3_SGI15_MASK
+	str	w4, [x5, #GICR_IPRIORITYR3_OFFSET]
+
+	/* Enable SGI 15 at redistributor - GICR_ISENABLER0 */
+	mov	w3, #GICR_ISENABLER0_SGI15
+	str	w3, [x5, #GICR_ISENABLER0_OFFSET]
+	dsb	sy
+	isb
+3:
+	/* Poll on rwp bit in GICR_CTLR */
+	ldr	w4, [x6, #GICR_CTLR_OFFSET]
+	tst	w4, #GICR_CTLR_RWP
+	b.ne	3b
+
+	/* Quiesce the debug interfaces */
+	mrs	x3, osdlr_el1
+	orr	x3, x3, #OSDLR_EL1_DLK_LOCK
+	msr	osdlr_el1, x3
+	isb
+
+	/* Enable grp0 ints */
+	mov	x3, #ICC_IGRPEN0_EL1_EN
+	msr	ICC_IGRPEN0_EL1, x3
+
+	/*
+	 * x5 = gicr sgi base addr
+	 * x6 = gicr rd  base addr
+	 * x7 = core mask lsb
+	 */
+
+	/* Clear any pending interrupts */
+	mvn	w1, wzr
+	str	w1, [x5, #GICR_ICPENDR0_OFFSET]
+
+	/* Make sure system counter is enabled */
+	ldr	x3, =NXP_TIMER_ADDR
+	ldr	w0, [x3, #SYS_COUNTER_CNTCR_OFFSET]
+	tst	w0, #SYS_COUNTER_CNTCR_EN
+	b.ne	4f
+	orr	w0, w0, #SYS_COUNTER_CNTCR_EN
+	str	w0, [x3, #SYS_COUNTER_CNTCR_OFFSET]
+4:
+	/* Enable the core timer and mask timer interrupt */
+	mov	x1, #CNTP_CTL_EL0_EN
+	orr	x1, x1, #CNTP_CTL_EL0_IMASK
+	msr	cntp_ctl_el0, x1
+
+	isb
+	mov	x30, x8
+	ret
+
+/*
+ * Part of CPU_OFF
+ *
+ * This function performs the final steps to shutdown the core
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses x0 - x5
+ */
+_soc_core_entr_off:
+	mov	x5, x30
+	mov	x4, x0
+
+	/* x4 = core mask */
+1:
+	/* Enter low-power state by executing wfi */
+	wfi
+
+	/* See if SGI15 woke us up */
+	mrs	x2, ICC_IAR0_EL1
+	mov	x3, #ICC_IAR0_EL1_SGI15
+	cmp	x2, x3
+	b.ne	1b
+
+	/* Deactivate the int */
+	msr	ICC_EOIR0_EL1, x2
+
+	/* x4 = core mask */
+2:
+	/* Check if core has been turned on */
+	mov	x0, x4
+	bl	_getCoreState
+
+	/* x0 = core state */
+
+	cmp	x0, #CORE_WAKEUP
+	b.ne	1b
+
+	/* If we get here, then we have exited the wfi */
+	mov	x30, x5
+	ret
+
+/*
+ * Part of CPU_OFF
+ *
+ * This function starts the process of starting a core back up
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses x0, x1, x2, x3, x4, x5, x6
+ */
+_soc_core_exit_off:
+	mov	x6, x30
+	mov	x5, x0
+
+	/* Disable forwarding of GRP0 ints at cpu interface */
+	msr	ICC_IGRPEN0_EL1, xzr
+
+	/* Get redistributor sgi base addr for this core */
+	mov	x0, x5
+	bl	get_gic_sgi_base
+	mov	x4, x0
+
+	/* x4 = gicr sgi base addr */
+	/* x5 = core mask */
+
+	/* Disable SGI 15 at redistributor - GICR_ICENABLER0 */
+	mov	w1, #GICR_ICENABLER0_SGI15
+	str	w1, [x4, #GICR_ICENABLER0_OFFSET]
+
+	/* Get redistributor rd base addr for this core */
+	mov	x0, x5
+	bl	get_gic_rd_base
+	mov	x4, x0
+
+	/* x4 = gicr rd  base addr */
+2:
+	/* Poll on rwp bit in GICR_CTLR */
+	ldr	w2, [x4, #GICR_CTLR_OFFSET]
+	tst	w2, #GICR_CTLR_RWP
+	b.ne	2b
+
+	/* x4 = gicr rd  base addr */
+
+	/* Unlock the debug interfaces */
+	mrs	x3, osdlr_el1
+	bic	x3, x3, #OSDLR_EL1_DLK_LOCK
+	msr	osdlr_el1, x3
+	isb
+
+	dsb	sy
+	isb
+	mov	x30, x6
+	ret
+
+/*
+ * This function requests a reset of the entire SOC
+ * in:  none
+ * out: none
+ * uses: x0, x1, x2, x3, x4, x5, x6
+ */
+_soc_sys_reset:
+	mov	x3, x30
+
+	/* Make sure the mask is cleared in the reset request mask register */
+	mov	x0, #RST_RSTRQMR1_OFFSET
+	mov	w1, wzr
+	bl	_write_reg_reset
+
+	/* Set the reset request */
+	mov	x4, #RST_RSTCR_OFFSET
+	mov	x0, x4
+	mov	w1, #RSTCR_RESET_REQ
+	bl	_write_reg_reset
+
+	/* x4 = RST_RSTCR_OFFSET */
+
+	/*
+	 * Just in case this address range is mapped as cacheable,
+	 * flush the write out of the dcaches
+	 */
+	mov	x2, #NXP_RESET_ADDR
+	add	x2, x2, x4
+	dc	cvac, x2
+	dsb	st
+	isb
+
+	/* This function does not return */
+1:
+	wfi
+	b	1b
+
+/*
+ * Part of SYSTEM_OFF
+ *
+ * This function turns off the SoC clocks
+ * Note: this function is not intended to return, and the only allowable
+ *       recovery is POR
+ * in:  none
+ * out: none
+ * uses x0, x1, x2, x3
+ */
+_soc_sys_off:
+	/*
+	 * Disable sec, spi and flexspi
+	 * TBD - Check if eNETC needs to be disabled
+	 */
+	ldr	x2, =NXP_DCFG_ADDR
+	ldr	x0, =DCFG_DEVDISR1_OFFSET
+	ldr	w1, =DCFG_DEVDISR1_SEC
+	str	w1, [x2, x0]
+	ldr	x0, =DCFG_DEVDISR4_OFFSET
+	ldr	w1, =DCFG_DEVDISR4_SPI_QSPI
+	str	w1, [x2, x0]
+
+	/* Set TPMWAKEMR0 */
+	ldr	x0, =TPMWAKEMR0_ADDR
+	mov	w1, #0x1
+	str	w1, [x0]
+
+	/* Disable icache, dcache, mmu @ EL1 */
+	mov	x1, #SCTLR_I_C_M_MASK
+	mrs	x0, sctlr_el1
+	bic	x0, x0, x1
+	msr	sctlr_el1, x0
+
+	/* Disable L2 prefetches */
+	mrs	x0, CPUECTLR_EL1
+	orr	x0, x0, #CPUECTLR_SMPEN_EN
+	bic	x0, x0, #CPUECTLR_TIMER_MASK
+	orr	x0, x0, #CPUECTLR_TIMER_2TICKS
+	msr	CPUECTLR_EL1, x0
+	dsb	sy
+	isb
+
+	/* Disable CCI snoop domain */
+	ldr	x0, =NXP_CCI_ADDR
+	mov	w1, #0x1
+	str	w1, [x0]
+
+	bl	get_pmu_idle_core_mask
+
+	/* x3 = pmu base addr */
+	mov	x3, #NXP_PMU_ADDR
+4:
+	ldr	w1, [x3, #PMU_PCPW20SR_OFFSET]
+	cmp	w1, w0
+	b.ne	4b
+
+	bl	get_pmu_idle_cluster_mask
+	mov	x3, #NXP_PMU_ADDR
+	str	w0, [x3, #PMU_CLAINACTSETR_OFFSET]
+
+	bl	get_pmu_idle_core_mask
+	mov	x3, #NXP_PMU_ADDR
+1:
+	ldr	w1, [x3, #PMU_PCPW20SR_OFFSET]
+	cmp	w1, w0
+	b.ne	1b
+
+	bl	get_pmu_flush_cluster_mask
+	mov	x3, #NXP_PMU_ADDR
+	str	w0, [x3, #PMU_CLL2FLUSHSETR_OFFSET]
+2:
+	ldr	w1, [x3, #PMU_CLL2FLUSHSR_OFFSET]
+	cmp	w1, w0
+	b.ne	2b
+
+	str	w0, [x3, #PMU_CLSL2FLUSHCLRR_OFFSET]
+
+	str	w0, [x3, #PMU_CLSINACTSETR_OFFSET]
+
+	mov	x2, #DAIF_SET_MASK
+	mrs	x1, spsr_el1
+	orr	x1, x1, x2
+	msr	spsr_el1, x1
+
+	mrs	x1, spsr_el2
+	orr	x1, x1, x2
+	msr	spsr_el2, x1
+
+	/* Force the debug interface to be quiescent */
+	mrs	x0, osdlr_el1
+	orr	x0, x0, #0x1
+	msr	osdlr_el1, x0
+
+	/* Invalidate all TLB entries at all 3 exception levels */
+	tlbi	alle1
+	tlbi	alle2
+	tlbi	alle3
+
+	/* x3 = pmu base addr */
+
+	/* Request lpm20 */
+	ldr	x0, =PMU_POWMGTCSR_OFFSET
+	ldr	w1, =PMU_POWMGTCSR_VAL
+	str	w1, [x3, x0]
+	isb
+	dsb	sy
+5:
+	wfe
+	b.eq	5b
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function performs SoC-specific programming prior to standby
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses x0, x1
+ */
+_soc_core_prep_stdby:
+	/* Clear CPUECTLR_EL1[2:0] */
+	mrs	x1, CPUECTLR_EL1
+	bic	x1, x1, #CPUECTLR_TIMER_MASK
+	msr	CPUECTLR_EL1, x1
+
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function puts the calling core into standby state
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses x0
+ */
+_soc_core_entr_stdby:
+	/* X0 = core mask lsb */
+	dsb	sy
+	isb
+	wfi
+
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function performs any SoC-specific cleanup after standby state
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses none
+ */
+_soc_core_exit_stdby:
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function performs SoC-specific programming prior to power-down
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses x0, x1, x2
+ */
+_soc_core_prep_pwrdn:
+	/* Make sure system counter is enabled */
+	ldr	x2, =NXP_TIMER_ADDR
+	ldr	w0, [x2, #SYS_COUNTER_CNTCR_OFFSET]
+	tst	w0, #SYS_COUNTER_CNTCR_EN
+	b.ne	1f
+	orr	w0, w0, #SYS_COUNTER_CNTCR_EN
+	str	w0, [x2, #SYS_COUNTER_CNTCR_OFFSET]
+1:
+	/*
+	 * Enable dynamic retention control (CPUECTLR[2:0])
+	 * Set the SMPEN bit (CPUECTLR[6])
+	 */
+	mrs	x1, CPUECTLR_EL1
+	bic	x1, x1, #CPUECTLR_RET_MASK
+	orr	x1, x1, #CPUECTLR_TIMER_2TICKS
+	orr	x1, x1, #CPUECTLR_SMPEN_EN
+	msr	CPUECTLR_EL1, x1
+
+	isb
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function puts the calling core into a power-down state
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses x0
+ */
+_soc_core_entr_pwrdn:
+	/* X0 = core mask lsb */
+	dsb	sy
+	isb
+	wfi
+
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function performs any SoC-specific cleanup after power-down state
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses none
+ */
+_soc_core_exit_pwrdn:
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function performs SoC-specific programming prior to standby
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses x0, x1
+ */
+_soc_clstr_prep_stdby:
+	/* Clear CPUECTLR_EL1[2:0] */
+	mrs	x1, CPUECTLR_EL1
+	bic	x1, x1, #CPUECTLR_TIMER_MASK
+	msr	CPUECTLR_EL1, x1
+
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function performs any SoC-specific cleanup after standby state
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses none
+ */
+_soc_clstr_exit_stdby:
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function performs SoC-specific programming prior to power-down
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses x0, x1, x2
+ */
+_soc_clstr_prep_pwrdn:
+	/* Make sure system counter is enabled */
+	ldr	x2, =NXP_TIMER_ADDR
+	ldr	w0, [x2, #SYS_COUNTER_CNTCR_OFFSET]
+	tst	w0, #SYS_COUNTER_CNTCR_EN
+	b.ne	1f
+	orr	w0, w0, #SYS_COUNTER_CNTCR_EN
+	str	w0, [x2, #SYS_COUNTER_CNTCR_OFFSET]
+1:
+	/*
+	 * Enable dynamic retention control (CPUECTLR[2:0])
+	 * Set the SMPEN bit (CPUECTLR[6])
+	 */
+	mrs	x1, CPUECTLR_EL1
+	bic	x1, x1, #CPUECTLR_RET_MASK
+	orr	x1, x1, #CPUECTLR_TIMER_2TICKS
+	orr	x1, x1, #CPUECTLR_SMPEN_EN
+	msr	CPUECTLR_EL1, x1
+
+	isb
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function performs any SoC-specific cleanup after power-down state
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses none
+ */
+_soc_clstr_exit_pwrdn:
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function performs SoC-specific programming prior to standby
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses x0, x1
+ */
+_soc_sys_prep_stdby:
+	/* Clear CPUECTLR_EL1[2:0] */
+	mrs	x1, CPUECTLR_EL1
+	bic	x1, x1, #CPUECTLR_TIMER_MASK
+	msr	CPUECTLR_EL1, x1
+
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function performs any SoC-specific cleanup after standby state
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses none
+ */
+_soc_sys_exit_stdby:
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function performs SoC-specific programming prior to
+ * suspend-to-power-down
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses x0, x1, x2, x3, x4
+ */
+_soc_sys_prep_pwrdn:
+	/* Set retention control */
+	mrs	x0, CPUECTLR_EL1
+	bic	x0, x0, #CPUECTLR_TIMER_MASK
+	orr	x0, x0, #CPUECTLR_TIMER_2TICKS
+	orr	x0, x0, #CPUECTLR_SMPEN_EN
+	msr	CPUECTLR_EL1, x0
+	dsb	sy
+	isb
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function puts the calling core, and potentially the soc, into a
+ * low-power state
+ * in:  x0 = core mask lsb
+ * out: x0 = 0, success
+ *      x0 < 0, failure
+ * uses x0, x1, x2, x3, x4, x5, x6, x7, x8, x9, x10, x13, x14, x15,
+ *      x16, x17, x18
+ */
+_soc_sys_pwrdn_wfi:
+	mov	x18, x30
+
+	mov	x3, #NXP_PMU_ADDR
+
+	/* x3 = pmu base addr */
+
+	/* Backup epu registers to stack */
+	ldr	x2, =NXP_EPU_ADDR
+	ldr	w4, [x2, #EPU_EPIMCR10_OFFSET]
+	ldr	w5, [x2, #EPU_EPCCR10_OFFSET]
+	ldr	w6, [x2, #EPU_EPCTR10_OFFSET]
+	ldr	w7, [x2, #EPU_EPGCR_OFFSET]
+	stp	x4,  x5,  [sp, #-16]!
+	stp	x6,  x7,  [sp, #-16]!
+
+	/*
+	 * x2 = epu base addr
+	 * x3 = pmu base addr
+	 */
+
+	/* Set up EPU event to receive the wake signal from PMU */
+	mov	w4, #EPU_EPIMCR10_VAL
+	mov	w5, #EPU_EPCCR10_VAL
+	mov	w6, #EPU_EPCTR10_VAL
+	mov	w7, #EPU_EPGCR_VAL
+	str	w4, [x2, #EPU_EPIMCR10_OFFSET]
+	str	w5, [x2, #EPU_EPCCR10_OFFSET]
+	str	w6, [x2, #EPU_EPCTR10_OFFSET]
+	str	w7, [x2, #EPU_EPGCR_OFFSET]
+
+	ldr	x2, =NXP_GICD_ADDR
+
+	/*
+	 * x2 = gicd base addr
+	 * x3 = pmu base addr
+	 */
+
+	/* Backup flextimer/mmc/usb interrupt router */
+	ldr	x0, =GICD_IROUTER60_OFFSET
+	ldr	x1, =GICD_IROUTER76_OFFSET
+	ldr	w4, [x2, x0]
+	ldr	w5, [x2, x1]
+	ldr	x0, =GICD_IROUTER112_OFFSET
+	ldr	x1, =GICD_IROUTER113_OFFSET
+	ldr	w6, [x2, x0]
+	ldr	w7, [x2, x1]
+	stp	x4,  x5,  [sp, #-16]!
+	stp	x6,  x7,  [sp, #-16]!
+
+	/*
+	 * x2 = gicd base addr
+	 * x3 = pmu base addr
+	 * x0 = GICD_IROUTER112_OFFSET
+	 * x1 = GICD_IROUTER113_OFFSET
+	 */
+
+	/* Re-route interrupt to cluster 1 */
+	ldr	w4, =GICD_IROUTER_VALUE
+	str	w4, [x2, x0]
+	str	w4, [x2, x1]
+	ldr	x0, =GICD_IROUTER60_OFFSET
+	ldr	x1, =GICD_IROUTER76_OFFSET
+	str	w4, [x2, x0]
+	str	w4, [x2, x1]
+	dsb	sy
+	isb
+
+	/* x3 = pmu base addr */
+
+	/* Disable sec, Check for eNETC, spi and qspi */
+	ldr	x2, =NXP_DCFG_ADDR
+	ldr	x0, =DCFG_DEVDISR1_OFFSET
+	ldr	w1, =DCFG_DEVDISR1_SEC
+	str	w1, [x2, x0]
+
+	ldr	x0, =DCFG_DEVDISR4_OFFSET
+	ldr	w1, =DCFG_DEVDISR4_SPI_QSPI
+	str	w1, [x2, x0]
+
+	/* x3 = pmu base addr */
+
+	/* Set TPMWAKEMR0 */
+	ldr	x0, =TPMWAKEMR0_ADDR
+	mov	w1, #0x1
+	str	w1, [x0]
+
+	/* Disable CCI snoop domain */
+	ldr	x0, =NXP_CCI_ADDR
+	mov	w1, #0x1
+	str	w1, [x0]
+
+	/* Setup retention control */
+	mrs	x0, CPUECTLR_EL1
+	orr	x0, x0, #CPUECTLR_SMPEN_EN
+	orr	x0, x0, #CPUECTLR_TIMER_2TICKS
+	msr	CPUECTLR_EL1, x0
+	dsb	sy
+	isb
+
+	bl	get_pmu_idle_core_mask
+	mov	x3, #NXP_PMU_ADDR
+8:
+	ldr	w1, [x3, #PMU_PCPW20SR_OFFSET]
+	cmp	w1, w0
+	b.ne	8b
+
+	/* x3 = NXP_PMU_ADDR */
+	/* 1 cluster SoC */
+
+	bl	get_pmu_idle_cluster_mask
+	mov	x3, #NXP_PMU_ADDR
+
+	str	w0, [x3, #PMU_CLAINACTSETR_OFFSET]
+
+	bl	get_pmu_idle_core_mask
+	/* x3 = NXP_PMU_ADDR */
+	mov	x3, #NXP_PMU_ADDR
+1:
+	ldr	w1, [x3, #PMU_PCPW20SR_OFFSET]
+	cmp	w1, w0
+	b.ne	1b
+
+	/* x3 = NXP_PMU_ADDR */
+	bl	get_pmu_flush_cluster_mask
+	mov	x3, #NXP_PMU_ADDR
+
+	str	w0, [x3, #PMU_CLL2FLUSHSETR_OFFSET]
+
+	/* x3 = NXP_PMU_ADDR */
+2:
+	ldr	w1, [x3, #PMU_CLL2FLUSHSR_OFFSET]
+	cmp	w1, w0
+	b.ne	2b
+
+	/* x3 = NXP_PMU_ADDR */
+
+	str	w0, [x3, #PMU_CLSL2FLUSHCLRR_OFFSET]
+
+	str	w0, [x3, #PMU_CLSINACTSETR_OFFSET]
+
+	/* Force the debug interface to be quiescent */
+	mrs	x0, osdlr_el1
+	orr	x0, x0, #0x1
+	msr	osdlr_el1, x0
+
+	/*
+	 * Enable the WakeRequest signal
+	 * x3 is cpu mask starting from cpu1 to cpu0
+	 */
+	bl	get_tot_num_cores
+	sub	x0, x0, #1
+	mov	x3, #0x1
+	lsl	x3, x3, x0
+2:
+	mov	x0, x3
+	bl	get_gic_rd_base  // 0-2
+	ldr	w1, [x0, #GICR_WAKER_OFFSET]
+	orr	w1, w1, #GICR_WAKER_SLEEP_BIT
+	str	w1, [x0, #GICR_WAKER_OFFSET]
+1:
+	ldr	w1, [x0, #GICR_WAKER_OFFSET]
+	cmp	w1, #GICR_WAKER_ASLEEP
+	b.ne	1b
+
+	lsr	x3, x3, #1
+	cbnz	x3, 2b
+
+	/* Invalidate all TLB entries at all 3 exception levels */
+	tlbi	alle1
+	tlbi	alle2
+	tlbi	alle3
+
+	/* Request lpm20 */
+	mov	x3, #NXP_PMU_ADDR
+	ldr	x0, =PMU_POWMGTCSR_OFFSET
+	ldr	w1, =PMU_POWMGTCSR_VAL
+	str	w1, [x3, x0]
+
+	ldr	x5, =NXP_EPU_ADDR
+4:
+	wfe
+	ldr	w1, [x5, #EPU_EPCTR10_OFFSET]
+	cmp	w1, #0
+	b.eq	4b
+
+	/* x3 = NXP_PMU_ADDR */
+
+	bl	get_pmu_idle_cluster_mask
+	mov	x3, NXP_PMU_ADDR
+
+	/* Re-enable the GPP ACP */
+	str	w0, [x3, #PMU_CLAINACTCLRR_OFFSET]
+	str	w0, [x3, #PMU_CLSINACTCLRR_OFFSET]
+
+	/* x3 = NXP_PMU_ADDR */
+3:
+	ldr	w1, [x3, #PMU_CLAINACTSETR_OFFSET]
+	cbnz	w1, 3b
+4:
+	ldr	w1, [x3, #PMU_CLSINACTSETR_OFFSET]
+	cbnz	w1, 4b
+
+	/*
+	 * Enable the WakeRequest signal on cpu 0-1
+	 * x3 is cpu mask starting from cpu1
+	 */
+	bl	get_tot_num_cores
+	sub	x0, x0, #1
+	mov	x3, #0x1
+	lsl	x3, x3, x0
+2:
+	mov	x0, x3
+	bl	get_gic_rd_base  // 0-2
+	ldr	w1, [x0, #GICR_WAKER_OFFSET]
+	bic	w1, w1, #GICR_WAKER_SLEEP_BIT
+	str	w1, [x0, #GICR_WAKER_OFFSET]
+1:
+	ldr	w1, [x0, #GICR_WAKER_OFFSET]
+	cbnz	w1, 1b
+
+	lsr	x3, x3, #1
+	cbnz	x3, 2b
+
+	/* Enable CCI snoop domain */
+	ldr	x0, =NXP_CCI_ADDR
+	str	wzr, [x0]
+	dsb	sy
+	isb
+
+	ldr	x3, =NXP_EPU_ADDR
+
+	/* x3 = epu base addr */
+
+	/* Enable sec, enetc, spi and qspi */
+	ldr	x2, =NXP_DCFG_ADDR
+	str	wzr, [x2, #DCFG_DEVDISR1_OFFSET]
+	str	wzr, [x2, #DCFG_DEVDISR2_OFFSET]
+	str	wzr, [x2, #DCFG_DEVDISR4_OFFSET]
+
+	/* Restore flextimer/mmc/usb interrupt router */
+	ldr	x3, =NXP_GICD_ADDR
+	ldp	x0, x2, [sp], #16
+	ldr	x1, =GICD_IROUTER113_OFFSET
+	str	w2, [x3, x1]
+	ldr	x1, =GICD_IROUTER112_OFFSET
+	str	w0, [x3, x1]
+	ldp	x0, x2, [sp], #16
+	ldr	x1, =GICD_IROUTER76_OFFSET
+	str	w2, [x3, x1]
+	ldr	x1, =GICD_IROUTER60_OFFSET
+	str	w0, [x3, x1]
+
+	/* Restore EPU registers */
+	ldr	x3, =NXP_EPU_ADDR
+	ldp	x0, x2, [sp], #16
+	str	w2, [x3, #EPU_EPGCR_OFFSET]
+	str	w0, [x3, #EPU_EPCTR10_OFFSET]
+	ldp	x2, x1, [sp], #16
+	str	w1, [x3, #EPU_EPCCR10_OFFSET]
+	str	w2, [x3, #EPU_EPIMCR10_OFFSET]
+
+	dsb	sy
+	isb
+	mov	x30, x18
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function performs any SoC-specific cleanup after power-down
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses x0, x1
+ */
+_soc_sys_exit_pwrdn:
+	/* Enable stack alignment checking */
+	mrs	x1, SCTLR_EL1
+	orr	x1, x1, #0x4
+	msr	SCTLR_EL1, x1
+
+	/* Enable debug interface */
+	mrs	x1, osdlr_el1
+	bic	x1, x1, #OSDLR_EL1_DLK_LOCK
+	msr	osdlr_el1, x1
+
+	/* Enable i-cache */
+	mrs	x1, SCTLR_EL3
+	orr	x1, x1, #SCTLR_I_MASK
+	msr	SCTLR_EL3, x1
+
+	isb
+	ret
+
+/*
+ * This function setc up the TrustZone Address Space Controller (TZASC)
+ * in:  none
+ * out: none
+ * uses x0, x1
+ */
+init_tzpc:
+	/* Set Non Secure access for all devices protected via TZPC */
+	ldr	x1, =TZPCDECPROT_0_SET_BASE   /* decode Protection-0 Set Reg */
+	mov	w0, #0xFF		      /* set decode region to NS, Bits[7:0] */
+	str	w0, [x1]
+
+	ldr	x1, =TZPCDECPROT_1_SET_BASE   /* decode Protection-1 Set Reg */
+	mov	w0, #0xFF		      /* set decode region to NS, Bits[7:0] */
+	str	w0, [x1]
+
+	ldr	x1, =TZPCDECPROT_2_SET_BASE   /* decode Protection-2 Set Reg */
+	mov	w0, #0xFF		      /* set decode region to NS, Bits[7:0] */
+	str	w0, [x1]
+
+	 /* entire SRAM as NS */
+	ldr	x1, =NXP_OCRAM_TZPC_ADDR      /* secure RAM region size Reg */
+	mov	w0, #0x00000000		      /* 0x00000000 = no secure region */
+	str	w0, [x1]
+
+	ret
+
+/*
+ * This function performs any needed initialization on SecMon for
+ * boot services
+ */
+initSecMon:
+	/* Read the register hpcomr */
+	ldr	x1, =NXP_SNVS_ADDR
+	ldr	w0, [x1, #SECMON_HPCOMR_OFFSET]
+	/* Turn off secure access for the privileged registers */
+	orr	w0, w0, #SECMON_HPCOMR_NPSWAEN
+	/* Write back */
+	str	w0, [x1, #SECMON_HPCOMR_OFFSET]
+
+	ret
+
+/*
+ * This function checks to see if cores which are to be disabled have been
+ * released from reset - if not, it releases them
+ * in:  none
+ * out: none
+ * uses x0, x1, x2, x3, x4, x5, x6, x7, x8
+ */
+release_disabled:
+	stp	x18, x30, [sp, #-16]!
+
+	/*
+	 * Get the number of cpus on this device
+	 * Calling the below c function.
+	 * No need to Callee saved registers x9-x15,
+	 * as these registers are not used by the callee
+	 * prior to calling the below C-routine.
+	 */
+	bl	get_tot_num_cores
+	mov	x6, x0
+
+	/* Read COREDISABLESR */
+	mov	x0, #NXP_DCFG_ADDR
+	ldr	w4, [x0, #DCFG_COREDISABLEDSR_OFFSET]
+
+	mov	x0, #NXP_RESET_ADDR
+	ldr	w5, [x0, #BRR_OFFSET]
+
+	/* Load the core mask for the first core */
+	mov	x7, #1
+
+	/*
+	 * x4 = COREDISABLESR
+	 * x5 = BRR
+	 * x6 = loop count
+	 * x7 = core mask bit
+	 */
+2:
+	/* Check if the core is to be disabled */
+	tst	x4, x7
+	b.eq	1f
+
+	/* See if disabled cores have already been released from reset */
+	tst	x5, x7
+	b.ne	1f
+
+	/* If core has not been released, then release it (0-3) */
+	mov	x0, x7
+	bl	_soc_core_release
+
+	/* Record the core state in the data area (0-3) */
+	mov	x0, x7
+	mov	x1, #CORE_DISABLED
+	bl	_setCoreState
+1:
+	/* Decrement the counter */
+	subs	x6, x6, #1
+	b.le	3f
+	/* Shift the core mask to the next core */
+	lsl	x7, x7, #1
+	/* Continue */
+	b	2b
+3:
+	ldp	x18, x30, [sp], #16
+	ret
+
+/*
+ * Write a register in the DCFG block
+ * in:  x0 = offset
+ * in:  w1 = value to write
+ * uses x0, x1, x2
+ */
+_write_reg_dcfg:
+	ldr	x2, =NXP_DCFG_ADDR
+	str	w1, [x2, x0]
+	ret
+
+/*
+ * Read a register in the DCFG block
+ * in:  x0 = offset
+ * out: w0 = value read
+ * uses x0, x1, x2
+ */
+_read_reg_dcfg:
+	ldr	x2, =NXP_DCFG_ADDR
+	ldr	w1, [x2, x0]
+	mov	w0, w1
+	ret
+
+/*
+ * This function returns an mpidr value for a core, given a core_mask_lsb
+ * in:  x0 = core mask lsb
+ * out: x0 = affinity2:affinity1:affinity0, where affinity is 8-bits
+ * uses x0, x1
+ */
+get_mpidr_value:
+	/* Convert a core mask to an SoC core number */
+	clz	w0, w0
+	mov	w1, #31
+	sub	w0, w1, w0
+
+	/* Get the mpidr core number from the SoC core number */
+	mov	w1, wzr
+	tst	x0, #1
+	b.eq	1f
+	orr	w1, w1, #1
+1:
+	/* Extract the cluster number */
+	lsr	w0, w0, #1
+	orr	w0, w1, w0, lsl #8
+
+	ret
+
+/*
+ * This function returns the redistributor base address for the core specified
+ * in x1
+ * in:  x0 - core mask lsb of specified core
+ * out: x0 = redistributor rd base address for specified core
+ * uses x0, x1, x2
+ */
+get_gic_rd_base:
+	/* Get the 0-based core number */
+	clz	w1, w0
+	mov	w2, #0x20
+	sub	w2, w2, w1
+	sub	w2, w2, #1
+
+	/* x2 = core number / loop counter */
+	ldr	x0, =NXP_GICR_ADDR
+	mov	x1, #GIC_RD_OFFSET
+2:
+	cbz	x2, 1f
+	add	x0, x0, x1
+	sub	x2, x2, #1
+	b	2b
+1:
+	ret
+
+/*
+ * This function returns the redistributor base address for the core specified
+ * in x1
+ * in:  x0 - core mask lsb of specified core
+ * out: x0 = redistributor sgi base address for specified core
+ * uses x0, x1, x2
+ */
+get_gic_sgi_base:
+	/* Get the 0-based core number */
+	clz	w1, w0
+	mov	w2, #0x20
+	sub	w2, w2, w1
+	sub	w2, w2, #1
+
+	/* x2 = core number / loop counter */
+	ldr	x0, =NXP_GICR_SGI_ADDR
+	mov	x1, #GIC_SGI_OFFSET
+2:
+	cbz	x2, 1f
+	add	x0, x0, x1
+	sub	x2, x2, #1
+	b	2b
+1:
+	ret
+
+/*
+ * Write a register in the RESET block
+ * in:  x0 = offset
+ * in:  w1 = value to write
+ * uses x0, x1, x2
+ */
+_write_reg_reset:
+	ldr	x2, =NXP_RESET_ADDR
+	str	w1, [x2, x0]
+	ret
+
+/*
+ * Read a register in the RESET block
+ * in:  x0 = offset
+ * out: w0 = value read
+ * uses x0, x1
+ */
+_read_reg_reset:
+	ldr	x1, =NXP_RESET_ADDR
+	ldr	w0, [x1, x0]
+	ret
diff --git a/plat/nxp/soc-ls1028a/aarch64/ls1028a_helpers.S b/plat/nxp/soc-ls1028a/aarch64/ls1028a_helpers.S
new file mode 100644
index 0000000..ec67529
--- /dev/null
+++ b/plat/nxp/soc-ls1028a/aarch64/ls1028a_helpers.S
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2018-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+
+#include <platform_def.h>
+
+.globl	plat_secondary_cold_boot_setup
+.globl	plat_is_my_cpu_primary
+.globl	plat_reset_handler
+.globl  platform_mem_init
+
+func platform_mem1_init
+	ret
+endfunc platform_mem1_init
+
+func platform_mem_init
+	ret
+endfunc	platform_mem_init
+
+func apply_platform_errata
+	ret
+endfunc apply_platform_errata
+
+func plat_reset_handler
+	mov	x29, x30
+	bl	apply_platform_errata
+
+#if defined(IMAGE_BL31)
+	ldr	x0, =POLICY_SMMU_PAGESZ_64K
+	cbz	x0, 1f
+	/* Set the SMMU page size in the sACR register */
+	bl	_set_smmu_pagesz_64
+#endif
+1:
+	mov	x30, x29
+	ret
+endfunc plat_reset_handler
+
+/*
+ * void plat_secondary_cold_boot_setup (void);
+ *
+ * This function performs any platform specific actions
+ * needed for a secondary cpu after a cold reset e.g
+ * mark the cpu's presence, mechanism to place it in a
+ * holding pen etc.
+ */
+func plat_secondary_cold_boot_setup
+	/* ls1028a does not do cold boot for secondary CPU */
+cb_panic:
+	b	cb_panic
+endfunc plat_secondary_cold_boot_setup
+
+/*
+ * unsigned int plat_is_my_cpu_primary (void);
+ *
+ * Find out whether the current cpu is the primary
+ * cpu.
+ */
+func plat_is_my_cpu_primary
+	mrs	x0, mpidr_el1
+	and	x0, x0, #(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK)
+	cmp	x0, 0x0
+	cset	w0, eq
+	ret
+endfunc plat_is_my_cpu_primary
diff --git a/plat/nxp/soc-ls1028a/include/soc.h b/plat/nxp/soc-ls1028a/include/soc.h
new file mode 100644
index 0000000..b1d044a
--- /dev/null
+++ b/plat/nxp/soc-ls1028a/include/soc.h
@@ -0,0 +1,149 @@
+/*
+ * Copyright 2018-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SOC_H
+#define	SOC_H
+
+/* Chassis specific defines - common across SoC's of a particular platform */
+#include <dcfg_lsch3.h>
+#include <soc_default_base_addr.h>
+#include <soc_default_helper_macros.h>
+
+/*
+ * SVR Definition of LS1028A
+ * (not include major and minor rev)
+ * These info is listed in Table B-6. DCFG differences
+ * between LS1028A and LS1027A of LS1028ARM(Reference Manual)
+ */
+#define SVR_LS1017AN		0x870B25
+#define SVR_LS1017AE		0x870B24
+#define SVR_LS1018AN		0x870B21
+#define SVR_LS1018AE		0x870B20
+#define SVR_LS1027AN		0x870B05
+#define SVR_LS1027AE		0x870B04
+#define SVR_LS1028AN		0x870B01
+#define SVR_LS1028AE		0x870B00
+
+/* Number of cores in platform */
+#define PLATFORM_CORE_COUNT		2
+#define NUMBER_OF_CLUSTERS		1
+#define CORES_PER_CLUSTER		2
+
+/* Set to 0 if the clusters are not symmetrical */
+#define SYMMETRICAL_CLUSTERS		1
+
+#define NUM_DRAM_REGIONS		3
+
+#define	NXP_DRAM0_ADDR			0x80000000
+#define NXP_DRAM0_MAX_SIZE		0x80000000	/* 2GB */
+
+#define NXP_DRAM1_ADDR			0x2080000000
+#define NXP_DRAM1_MAX_SIZE		0x1F80000000	/* 126G */
+
+#define NXP_DRAM2_ADDR			0x6000000000
+#define NXP_DRAM2_MAX_SIZE		0x2000000000	/* 128G */
+
+/* DRAM0 Size defined in platform_def.h */
+#define	NXP_DRAM0_SIZE			PLAT_DEF_DRAM0_SIZE
+
+/* CCSR space memory Map  */
+#undef NXP_UART_ADDR
+#define NXP_UART_ADDR			0x021C0500
+
+#undef NXP_UART1_ADDR
+#define NXP_UART1_ADDR			0x021C0600
+
+#undef NXP_WDOG1_TZ_ADDR
+#define NXP_WDOG1_TZ_ADDR		0x023C0000
+
+#undef NXP_GICR_ADDR
+#define NXP_GICR_ADDR			0x06040000
+
+#undef NXP_GICR_SGI_ADDR
+#define NXP_GICR_SGI_ADDR		0x06050000
+
+/* EPU register offsets and values */
+#define EPU_EPGCR_OFFSET              0x0
+#define EPU_EPIMCR10_OFFSET           0x128
+#define EPU_EPCTR10_OFFSET            0xa28
+#define EPU_EPCCR10_OFFSET            0x828
+#define EPU_EPCCR10_VAL               0xb2800000
+#define EPU_EPIMCR10_VAL              0xba000000
+#define EPU_EPCTR10_VAL               0x0
+#define EPU_EPGCR_VAL                 (1 << 31)
+
+/* PORSR1 */
+#define PORSR1_RCW_MASK		0x07800000
+#define PORSR1_RCW_SHIFT	23
+
+#define SDHC1_VAL		0x8
+#define SDHC2_VAL		0x9
+#define I2C1_VAL		0xa
+#define FLEXSPI_NAND2K_VAL	0xc
+#define FLEXSPI_NAND4K_VAL	0xd
+#define FLEXSPI_NOR		0xf
+
+/*
+ * Required LS standard platform porting definitions
+ * for CCI-400
+ */
+#define NXP_CCI_CLUSTER0_SL_IFACE_IX	4
+
+/* Defines required for using XLAT tables from ARM common code */
+#define PLAT_PHY_ADDR_SPACE_SIZE	(1ull << 40)
+#define PLAT_VIRT_ADDR_SPACE_SIZE	(1ull << 40)
+
+/* Clock Divisors */
+#define NXP_PLATFORM_CLK_DIVIDER	1
+#define NXP_UART_CLK_DIVIDER		2
+
+/* dcfg register offsets and values */
+#define DCFG_DEVDISR2_ENETC		(1 << 31)
+
+#define MPIDR_AFFINITY0_MASK		0x00FF
+#define MPIDR_AFFINITY1_MASK		0xFF00
+#define CPUECTLR_DISABLE_TWALK_PREFETCH	0x4000000000
+#define CPUECTLR_INS_PREFETCH_MASK	0x1800000000
+#define CPUECTLR_DAT_PREFETCH_MASK	0x0300000000
+#define OSDLR_EL1_DLK_LOCK		0x1
+#define CNTP_CTL_EL0_EN			0x1
+#define CNTP_CTL_EL0_IMASK		0x2
+
+#define SYSTEM_PWR_DOMAINS	1
+#define PLAT_NUM_PWR_DOMAINS	(PLATFORM_CORE_COUNT + \
+				 NUMBER_OF_CLUSTERS  + \
+				 SYSTEM_PWR_DOMAINS)
+
+/* Power state coordination occurs at the system level */
+#define PLAT_PD_COORD_LVL	MPIDR_AFFLVL2
+#define PLAT_MAX_PWR_LVL	PLAT_PD_COORD_LVL
+
+/* Local power state for power domains in Run state */
+#define LS_LOCAL_STATE_RUN	PSCI_LOCAL_STATE_RUN
+
+/* define retention state */
+#define PLAT_MAX_RET_STATE	(PSCI_LOCAL_STATE_RUN + 1)
+#define LS_LOCAL_STATE_RET	PLAT_MAX_RET_STATE
+
+/* define power-down state */
+#define PLAT_MAX_OFF_STATE	(PLAT_MAX_RET_STATE + 1)
+#define LS_LOCAL_STATE_OFF	PLAT_MAX_OFF_STATE
+
+/* One cache line needed for bakery locks on ARM platforms */
+#define PLAT_PERCPU_BAKERY_LOCK_SIZE	(1 * CACHE_WRITEBACK_GRANULE)
+
+#ifndef __ASSEMBLER__
+/* CCI slave interfaces */
+static const int cci_map[] = {
+	NXP_CCI_CLUSTER0_SL_IFACE_IX,
+};
+void soc_init_lowlevel(void);
+void soc_init_percpu(void);
+void _soc_set_start_addr(unsigned long addr);
+void _set_platform_security(void);
+#endif
+
+#endif /* SOC_H */
diff --git a/plat/nxp/soc-ls1028a/ls1028ardb/ddr_init.c b/plat/nxp/soc-ls1028a/ls1028ardb/ddr_init.c
new file mode 100644
index 0000000..d82be51
--- /dev/null
+++ b/plat/nxp/soc-ls1028a/ls1028ardb/ddr_init.c
@@ -0,0 +1,185 @@
+/*
+ * Copyright 2018-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#include <string.h>
+
+#include <common/debug.h>
+#include <ddr.h>
+#include <lib/utils.h>
+
+#include <platform_def.h>
+
+#ifdef CONFIG_STATIC_DDR
+const struct ddr_cfg_regs static_1600 = {
+	.cs[0].config = U(0x80040422),
+	.cs[0].bnds = U(0xFF),
+	.sdram_cfg[0] = U(0xE50C0004),
+	.sdram_cfg[1] = U(0x401100),
+	.timing_cfg[0] = U(0x91550018),
+	.timing_cfg[1] = U(0xBAB40C42),
+	.timing_cfg[2] = U(0x48C111),
+	.timing_cfg[3] = U(0x1111000),
+	.timing_cfg[4] = U(0x2),
+	.timing_cfg[5] = U(0x3401400),
+	.timing_cfg[7] = U(0x23300000),
+	.timing_cfg[8] = U(0x2114600),
+	.sdram_mode[0] = U(0x3010210),
+	.sdram_mode[9] = U(0x4000000),
+	.sdram_mode[8] = U(0x500),
+	.sdram_mode[2] = U(0x10210),
+	.sdram_mode[10] = U(0x400),
+	.sdram_mode[11] = U(0x4000000),
+	.sdram_mode[4] = U(0x10210),
+	.sdram_mode[12] = U(0x400),
+	.sdram_mode[13] = U(0x4000000),
+	.sdram_mode[6] = U(0x10210),
+	.sdram_mode[14] = U(0x400),
+	.sdram_mode[15] = U(0x4000000),
+	.interval = U(0x18600618),
+	.data_init = U(0xdeadbeef),
+	.zq_cntl = U(0x8A090705),
+	.clk_cntl = U(0x2000000),
+	.cdr[0] = U(0x80040000),
+	.cdr[1] = U(0xA181),
+	.wrlvl_cntl[0] = U(0x8675F605),
+	.wrlvl_cntl[1] = U(0x6070700),
+	.wrlvl_cntl[2] = U(0x0000008),
+	.dq_map[0] = U(0x5b65b658),
+	.dq_map[1] = U(0xd96d8000),
+	.dq_map[2] = U(0),
+	.dq_map[3] = U(0x1600000),
+	.debug[28] = U(0x00700046),
+};
+
+unsigned long long board_static_ddr(struct ddr_info *priv)
+{
+	memcpy(&priv->ddr_reg, &static_1600, sizeof(static_1600));
+	return ULL(0x100000000);
+}
+
+#else
+
+static const struct rc_timing rcz[] = {
+	{1600, 8, 5},
+	{}
+};
+
+static const struct board_timing ram[] = {
+	{0x1f, rcz, 0x1020200, 0x00000003},
+};
+
+int ddr_board_options(struct ddr_info *priv)
+{
+	int ret;
+	struct memctl_opt *popts = &priv->opt;
+
+	ret = cal_board_params(priv, ram, ARRAY_SIZE(ram));
+	if (ret != 0) {
+		return ret;
+	}
+
+	popts->bstopre = U(0x40); /* precharge value */
+	popts->half_strength_drive_en = 1;
+	popts->cpo_sample = U(0x46);
+	popts->ddr_cdr1 = DDR_CDR1_DHC_EN |
+			  DDR_CDR1_ODT(DDR_CDR_ODT_80ohm);
+	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_80ohm) |
+			  DDR_CDR2_VREF_OVRD(70); /* Vref = 70% */
+
+	popts->addr_hash = 1; /* address hashing */
+	return 0;
+}
+
+/* DDR model number:  MT40A1G8SA-075:E */
+struct dimm_params ddr_raw_timing = {
+	.n_ranks = U(1),
+	.rank_density = ULL(4294967296),
+	.capacity = ULL(4294967296),
+	.primary_sdram_width = U(32),
+	.ec_sdram_width = U(4),
+	.rdimm = U(0),
+	.mirrored_dimm = U(0),
+	.n_row_addr = U(16),
+	.n_col_addr = U(10),
+	.bank_group_bits = U(2),
+	.edc_config = U(2),
+	.burst_lengths_bitmask = U(0x0c),
+	.tckmin_x_ps = 750,
+	.tckmax_ps = 1900,
+	.caslat_x = U(0x0001FFE00),
+	.taa_ps = 13500,
+	.trcd_ps = 13500,
+	.trp_ps = 13500,
+	.tras_ps = 32000,
+	.trc_ps = 45500,
+	.twr_ps = 15000,
+	.trfc1_ps = 350000,
+	.trfc2_ps = 260000,
+	.trfc4_ps = 160000,
+	.tfaw_ps = 21000,
+	.trrds_ps = 3000,
+	.trrdl_ps = 4900,
+	.tccdl_ps = 5000,
+	.refresh_rate_ps = U(7800000),
+	.dq_mapping[0] = U(0x16),
+	.dq_mapping[1] = U(0x36),
+	.dq_mapping[2] = U(0x16),
+	.dq_mapping[3] = U(0x36),
+	.dq_mapping[4] = U(0x16),
+	.dq_mapping[5] = U(0x36),
+	.dq_mapping[6] = U(0x16),
+	.dq_mapping[7] = U(0x36),
+	.dq_mapping[8] = U(0x16),
+	.dq_mapping[9] = U(0x0),
+	.dq_mapping[10] = U(0x0),
+	.dq_mapping[11] = U(0x0),
+	.dq_mapping[12] = U(0x0),
+	.dq_mapping[13] = U(0x0),
+	.dq_mapping[14] = U(0x0),
+	.dq_mapping[15] = U(0x0),
+	.dq_mapping[16] = U(0x0),
+	.dq_mapping[17] = U(0x0),
+	.dq_mapping_ors = U(0),
+	.rc = U(0x1f),
+};
+
+int ddr_get_ddr_params(struct dimm_params *pdimm,
+			    struct ddr_conf *conf)
+{
+	static const char dimm_model[] = "Fixed DDR on board";
+
+	conf->dimm_in_use[0] = 1;
+	memcpy(pdimm, &ddr_raw_timing, sizeof(struct dimm_params));
+	memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
+
+	return 1;
+}
+#endif
+
+int64_t init_ddr(void)
+{
+	struct ddr_info info;
+	struct sysinfo sys;
+	int64_t dram_size;
+
+	zeromem(&sys, sizeof(sys));
+	get_clocks(&sys);
+	debug("platform clock %lu\n", sys.freq_platform);
+	debug("DDR PLL1 %lu\n", sys.freq_ddr_pll0);
+
+	zeromem(&info, sizeof(struct ddr_info));
+	info.num_ctlrs = 1;
+	info.dimm_on_ctlr = 1;
+	info.clk = get_ddr_freq(&sys, 0);
+	info.ddr[0] = (void *)NXP_DDR_ADDR;
+
+	dram_size = dram_init(&info);
+
+	if (dram_size < 0) {
+		ERROR("DDR init failed.\n");
+	}
+
+	return dram_size;
+}
diff --git a/plat/nxp/soc-ls1028a/ls1028ardb/plat_def.h b/plat/nxp/soc-ls1028a/ls1028ardb/plat_def.h
new file mode 100644
index 0000000..63c0219
--- /dev/null
+++ b/plat/nxp/soc-ls1028a/ls1028ardb/plat_def.h
@@ -0,0 +1,76 @@
+/*
+ * Copyright 2018-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLAT_DEF_H
+#define PLAT_DEF_H
+
+#include <arch.h>
+#include <cortex_a72.h>
+/*
+ * Required without TBBR.
+ * To include the defines for DDR PHY
+ * Images.
+ */
+#include <tbbr_img_def.h>
+
+#include <policy.h>
+#include <soc.h>
+
+
+#define NXP_SYSCLK_FREQ		100000000
+#define NXP_DDRCLK_FREQ		100000000
+
+/* UART related definition */
+#define NXP_CONSOLE_ADDR	NXP_UART_ADDR
+#define NXP_CONSOLE_BAUDRATE	115200
+
+#define NXP_SPD_EEPROM0		0x51
+
+/* Size of cacheable stacks */
+#if defined(IMAGE_BL2)
+#if defined(TRUSTED_BOARD_BOOT)
+#define PLATFORM_STACK_SIZE	0x2000
+#else
+#define PLATFORM_STACK_SIZE	0x1000
+#endif
+#elif defined(IMAGE_BL31)
+#define PLATFORM_STACK_SIZE	0x1000
+#endif
+
+/* SD block buffer */
+#define NXP_SD_BLOCK_BUF_SIZE	(0xC000)
+
+#ifdef SD_BOOT
+#define BL2_LIMIT		(NXP_OCRAM_ADDR + NXP_OCRAM_SIZE \
+				- NXP_SD_BLOCK_BUF_SIZE)
+#else
+#define BL2_LIMIT		(NXP_OCRAM_ADDR + NXP_OCRAM_SIZE)
+#endif
+#define BL2_TEXT_LIMIT		(BL2_LIMIT)
+
+/* IO defines as needed by IO driver framework */
+#define MAX_IO_DEVICES		4
+#define MAX_IO_BLOCK_DEVICES	1
+#define MAX_IO_HANDLES		4
+
+#define BL31_WDOG_SEC		89
+
+/*
+ * Define properties of Group 1 Secure and Group 0 interrupts as per GICv3
+ * terminology. On a GICv2 system or mode, the lists will be merged and treated
+ * as Group 0 interrupts.
+ */
+#define PLAT_LS_G1S_IRQ_PROPS(grp) \
+	INTR_PROP_DESC(BL32_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE)
+
+/* SGI 15 and Secure watchdog interrupts assigned to Group 0 */
+#define PLAT_LS_G0_IRQ_PROPS(grp)	\
+	INTR_PROP_DESC(BL31_WDOG_SEC, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(15, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL)
+#endif /* PLAT_DEF_H */
diff --git a/plat/nxp/soc-ls1028a/ls1028ardb/platform.c b/plat/nxp/soc-ls1028a/ls1028ardb/platform.c
new file mode 100644
index 0000000..65d508c
--- /dev/null
+++ b/plat/nxp/soc-ls1028a/ls1028ardb/platform.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2020-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <plat_common.h>
+
+#pragma weak board_enable_povdd
+#pragma weak board_disable_povdd
+
+bool board_enable_povdd(void)
+{
+#ifdef CONFIG_POVDD_ENABLE
+	return true;
+#else
+	return false;
+#endif
+}
+
+bool board_disable_povdd(void)
+{
+#ifdef CONFIG_POVDD_ENABLE
+	return true;
+#else
+	return false;
+#endif
+}
diff --git a/plat/nxp/soc-ls1028a/ls1028ardb/platform.mk b/plat/nxp/soc-ls1028a/ls1028ardb/platform.mk
new file mode 100644
index 0000000..c455000
--- /dev/null
+++ b/plat/nxp/soc-ls1028a/ls1028ardb/platform.mk
@@ -0,0 +1,33 @@
+#
+# Copyright 2020-2021 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# Board-specific build parameters
+BOOT_MODE	?=	flexspi_nor
+BOARD		:=	ls1028ardb
+POVDD_ENABLE	:=	no
+WARM_BOOT	:=	no
+
+# DDR build parameters
+NUM_OF_DDRC		:=	1
+CONFIG_DDR_NODIMM	:=	1
+DDR_ECC_EN		:=	yes
+
+# On-board flash
+FLASH_TYPE	:=	MT35XU02G
+XSPI_FLASH_SZ	:=	0x10000000
+
+BL2_SOURCES	+=	${BOARD_PATH}/ddr_init.c \
+			${BOARD_PATH}/platform.c
+
+SUPPORTED_BOOT_MODE	:=	flexspi_nor	\
+				sd		\
+				emmc
+
+# Add platform board build info
+include plat/nxp/common/plat_make_helper/plat_common_def.mk
+
+# Add SoC build info
+include plat/nxp/soc-ls1028a/soc.mk
diff --git a/plat/nxp/soc-ls1028a/ls1028ardb/platform_def.h b/plat/nxp/soc-ls1028a/ls1028ardb/platform_def.h
new file mode 100644
index 0000000..bbad293
--- /dev/null
+++ b/plat/nxp/soc-ls1028a/ls1028ardb/platform_def.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLATFORM_DEF_H
+#define PLATFORM_DEF_H
+
+#include <plat_def.h>
+#include <plat_default_def.h>
+
+#endif /* PLATFORM_DEF_H */
diff --git a/plat/nxp/soc-ls1028a/ls1028ardb/policy.h b/plat/nxp/soc-ls1028a/ls1028ardb/policy.h
new file mode 100644
index 0000000..67a8b45
--- /dev/null
+++ b/plat/nxp/soc-ls1028a/ls1028ardb/policy.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright 2020-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef POLICY_H
+#define	POLICY_H
+
+/*
+ * Set this to 0x0 to leave the default SMMU page size in sACR
+ * Set this to 0x1 to change the SMMU page size to 64K
+ */
+#define POLICY_SMMU_PAGESZ_64K 0x1
+
+#endif /* POLICY_H */
diff --git a/plat/nxp/soc-ls1028a/soc.c b/plat/nxp/soc-ls1028a/soc.c
new file mode 100644
index 0000000..4f67154
--- /dev/null
+++ b/plat/nxp/soc-ls1028a/soc.c
@@ -0,0 +1,420 @@
+/*
+ * Copyright 2018-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <endian.h>
+
+#include <arch.h>
+#include <caam.h>
+#include <cassert.h>
+#include <cci.h>
+#include <common/debug.h>
+#include <dcfg.h>
+#include <i2c.h>
+#include <lib/xlat_tables/xlat_tables_v2.h>
+#include <ls_interconnect.h>
+#include <mmio.h>
+#if TRUSTED_BOARD_BOOT
+#include <nxp_smmu.h>
+#endif
+#include <nxp_timer.h>
+#ifdef CONFIG_OCRAM_ECC_EN
+#include <ocram.h>
+#endif
+#include <plat_console.h>
+#include <plat_gic.h>
+#include <plat_tzc400.h>
+#include <pmu.h>
+#include <scfg.h>
+#if defined(NXP_SFP_ENABLED)
+#include <sfp.h>
+#endif
+
+#include <errata.h>
+#include "plat_common.h"
+#include "platform_def.h"
+#include "soc.h"
+
+static dcfg_init_info_t dcfg_init_data = {
+	.g_nxp_dcfg_addr = NXP_DCFG_ADDR,
+	.nxp_sysclk_freq = NXP_SYSCLK_FREQ,
+	.nxp_ddrclk_freq = NXP_DDRCLK_FREQ,
+	.nxp_plat_clk_divider = NXP_PLATFORM_CLK_DIVIDER,
+};
+
+static struct soc_type soc_list[] =  {
+	SOC_ENTRY(LS1017AN, LS1017AN, 1, 1),
+	SOC_ENTRY(LS1017AE, LS1017AE, 1, 1),
+	SOC_ENTRY(LS1018AN, LS1018AN, 1, 1),
+	SOC_ENTRY(LS1018AE, LS1018AE, 1, 1),
+	SOC_ENTRY(LS1027AN, LS1027AN, 1, 2),
+	SOC_ENTRY(LS1027AE, LS1027AE, 1, 2),
+	SOC_ENTRY(LS1028AN, LS1028AN, 1, 2),
+	SOC_ENTRY(LS1028AE, LS1028AE, 1, 2),
+};
+
+CASSERT(NUMBER_OF_CLUSTERS && NUMBER_OF_CLUSTERS <= 256,
+	assert_invalid_ls1028a_cluster_count);
+
+/*
+ * Function returns the base counter frequency
+ * after reading the first entry at CNTFID0 (0x20 offset).
+ *
+ * Function is used by:
+ *   1. ARM common code for PSCI management.
+ *   2. ARM Generic Timer init.
+ *
+ */
+unsigned int plat_get_syscnt_freq2(void)
+{
+	unsigned int counter_base_frequency;
+	/*
+	 * Below register specifies the base frequency of the system counter.
+	 * As per NXP Board Manuals:
+	 * The system counter always works with SYS_REF_CLK/4 frequency clock.
+	 */
+	counter_base_frequency = mmio_read_32(NXP_TIMER_ADDR + CNTFID_OFF);
+
+	return counter_base_frequency;
+}
+
+#ifdef IMAGE_BL2
+void soc_preload_setup(void)
+{
+}
+
+void soc_early_init(void)
+{
+	uint8_t num_clusters, cores_per_cluster;
+
+#ifdef CONFIG_OCRAM_ECC_EN
+	ocram_init(NXP_OCRAM_ADDR, NXP_OCRAM_SIZE);
+#endif
+	dcfg_init(&dcfg_init_data);
+	enable_timer_base_to_cluster(NXP_PMU_ADDR);
+	enable_core_tb(NXP_PMU_ADDR);
+	dram_regions_info_t *dram_regions_info = get_dram_regions_info();
+
+#ifdef POLICY_FUSE_PROVISION
+	gpio_init(&gpio_init_data);
+	sec_init(NXP_CAAM_ADDR);
+#endif
+
+#if LOG_LEVEL > 0
+	/* Initialize the console to provide early debug support */
+	plat_console_init(NXP_CONSOLE_ADDR,
+				NXP_UART_CLK_DIVIDER, NXP_CONSOLE_BAUDRATE);
+#endif
+	enum  boot_device dev = get_boot_dev();
+	/*
+	 * Mark the buffer for SD in OCRAM as non secure.
+	 * The buffer is assumed to be at end of OCRAM for
+	 * the logic below to calculate TZPC programming
+	 */
+	if (dev == BOOT_DEVICE_EMMC || dev == BOOT_DEVICE_SDHC2_EMMC) {
+		/*
+		 * Calculate the region in OCRAM which is secure
+		 * The buffer for SD needs to be marked non-secure
+		 * to allow SD to do DMA operations on it
+		 */
+		uint32_t secure_region = (NXP_OCRAM_SIZE - NXP_SD_BLOCK_BUF_SIZE);
+		uint32_t mask = secure_region/TZPC_BLOCK_SIZE;
+
+		mmio_write_32(NXP_OCRAM_TZPC_ADDR, mask);
+
+		/* Add the entry for buffer in MMU Table */
+		mmap_add_region(NXP_SD_BLOCK_BUF_ADDR, NXP_SD_BLOCK_BUF_ADDR,
+				NXP_SD_BLOCK_BUF_SIZE, MT_DEVICE | MT_RW | MT_NS);
+	}
+
+#if TRUSTED_BOARD_BOOT
+	uint32_t mode;
+
+	sfp_init(NXP_SFP_ADDR);
+
+	/*
+	 * For secure boot disable SMMU.
+	 * Later when platform security policy comes in picture,
+	 * this might get modified based on the policy
+	 */
+	if (check_boot_mode_secure(&mode) == true) {
+		bypass_smmu(NXP_SMMU_ADDR);
+	}
+
+	/*
+	 * For Mbedtls currently crypto is not supported via CAAM
+	 * enable it when that support is there. In tbbr.mk
+	 * the CAAM_INTEG is set as 0.
+	 */
+#ifndef MBEDTLS_X509
+	/* Initialize the crypto accelerator if enabled */
+	if (is_sec_enabled()) {
+		sec_init(NXP_CAAM_ADDR);
+	} else {
+		INFO("SEC is disabled.\n");
+	}
+#endif
+#endif
+
+	/* Set eDDRTQ for DDR performance */
+	scfg_setbits32((void *)(NXP_SCFG_ADDR + 0x210), 0x1f1f1f1f);
+
+	soc_errata();
+
+	/*
+	 * Initialize Interconnect for this cluster during cold boot.
+	 * No need for locks as no other CPU is active.
+	 */
+	cci_init(NXP_CCI_ADDR, cci_map, ARRAY_SIZE(cci_map));
+
+	/*
+	 * Enable Interconnect coherency for the primary CPU's cluster.
+	 */
+	get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+	plat_ls_interconnect_enter_coherency(num_clusters);
+
+	delay_timer_init(NXP_TIMER_ADDR);
+	i2c_init(NXP_I2C_ADDR);
+	dram_regions_info->total_dram_size = init_ddr();
+}
+
+void soc_bl2_prepare_exit(void)
+{
+#if defined(NXP_SFP_ENABLED) && defined(DISABLE_FUSE_WRITE)
+	set_sfp_wr_disable();
+#endif
+}
+
+/*
+ * This function returns the boot device based on RCW_SRC
+ */
+enum boot_device get_boot_dev(void)
+{
+	enum boot_device src = BOOT_DEVICE_NONE;
+	uint32_t porsr1;
+	uint32_t rcw_src;
+
+	porsr1 = read_reg_porsr1();
+
+	rcw_src = (porsr1 & PORSR1_RCW_MASK) >> PORSR1_RCW_SHIFT;
+	switch (rcw_src) {
+	case FLEXSPI_NOR:
+		src = BOOT_DEVICE_FLEXSPI_NOR;
+		INFO("RCW BOOT SRC is FLEXSPI NOR\n");
+		break;
+	case FLEXSPI_NAND2K_VAL:
+	case FLEXSPI_NAND4K_VAL:
+		INFO("RCW BOOT SRC is FLEXSPI NAND\n");
+		src = BOOT_DEVICE_FLEXSPI_NAND;
+		break;
+	case SDHC1_VAL:
+		src = BOOT_DEVICE_EMMC;
+		INFO("RCW BOOT SRC is SD\n");
+		break;
+	case SDHC2_VAL:
+		src = BOOT_DEVICE_SDHC2_EMMC;
+		INFO("RCW BOOT SRC is EMMC\n");
+		break;
+	default:
+		break;
+	}
+
+	return src;
+}
+
+/*
+ * This function sets up access permissions on memory regions
+ ****************************************************************************/
+void soc_mem_access(void)
+{
+	dram_regions_info_t *info_dram_regions = get_dram_regions_info();
+	struct tzc400_reg tzc400_reg_list[MAX_NUM_TZC_REGION];
+	int dram_idx = 0;
+	/* index 0 is reserved for region-0 */
+	int index = 1;
+
+	for (dram_idx = 0; dram_idx < info_dram_regions->num_dram_regions;
+	     dram_idx++) {
+		if (info_dram_regions->region[dram_idx].size == 0) {
+			ERROR("DDR init failure, or");
+			ERROR("DRAM regions not populated correctly.\n");
+			break;
+		}
+
+		index = populate_tzc400_reg_list(tzc400_reg_list,
+				dram_idx, index,
+				info_dram_regions->region[dram_idx].addr,
+				info_dram_regions->region[dram_idx].size,
+				NXP_SECURE_DRAM_SIZE, NXP_SP_SHRD_DRAM_SIZE);
+	}
+
+	mem_access_setup(NXP_TZC_ADDR, index, tzc400_reg_list);
+}
+
+#else
+
+static unsigned char _power_domain_tree_desc[NUMBER_OF_CLUSTERS + 2];
+/*
+ * This function dynamically constructs the topology according to
+ *  SoC Flavor and returns it.
+ */
+const unsigned char *plat_get_power_domain_tree_desc(void)
+{
+	uint8_t num_clusters, cores_per_cluster;
+	unsigned int i;
+
+	get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+	/*
+	 * The highest level is the system level. The next level is constituted
+	 * by clusters and then cores in clusters.
+	 */
+	_power_domain_tree_desc[0] = 1;
+	_power_domain_tree_desc[1] = num_clusters;
+
+	for (i = 0; i < _power_domain_tree_desc[1]; i++)
+		_power_domain_tree_desc[i + 2] = cores_per_cluster;
+
+	return _power_domain_tree_desc;
+}
+
+/*
+ * This function returns the core count within the cluster corresponding to
+ * `mpidr`.
+ */
+unsigned int plat_ls_get_cluster_core_count(u_register_t mpidr)
+{
+	uint8_t num_clusters, cores_per_cluster;
+
+	get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+	return num_clusters;
+}
+
+void soc_early_platform_setup2(void)
+{
+	dcfg_init(&dcfg_init_data);
+	/* Initialize system level generic timer for Socs */
+	delay_timer_init(NXP_TIMER_ADDR);
+
+#if LOG_LEVEL > 0
+	/* Initialize the console to provide early debug support */
+	plat_console_init(NXP_CONSOLE_ADDR,
+				NXP_UART_CLK_DIVIDER, NXP_CONSOLE_BAUDRATE);
+#endif
+}
+
+void soc_platform_setup(void)
+{
+	/* Initialize the GIC driver, cpu and distributor interfaces */
+	static uintptr_t target_mask_array[PLATFORM_CORE_COUNT];
+	static interrupt_prop_t ls_interrupt_props[] = {
+		PLAT_LS_G1S_IRQ_PROPS(INTR_GROUP1S),
+		PLAT_LS_G0_IRQ_PROPS(INTR_GROUP0)
+	};
+
+	plat_ls_gic_driver_init(NXP_GICD_ADDR, NXP_GICR_ADDR,
+				PLATFORM_CORE_COUNT,
+				ls_interrupt_props,
+				ARRAY_SIZE(ls_interrupt_props),
+				target_mask_array,
+				plat_core_pos);
+
+	plat_ls_gic_init();
+	enable_init_timer();
+}
+
+/* This function initializes the soc from the BL31 module */
+void soc_init(void)
+{
+	uint8_t num_clusters, cores_per_cluster;
+
+	get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+
+	/* Low-level init of the soc */
+	soc_init_lowlevel();
+	_init_global_data();
+	soc_init_percpu();
+	_initialize_psci();
+
+	/*
+	 * Initialize Interconnect for this cluster during cold boot.
+	 * No need for locks as no other CPU is active.
+	 */
+	cci_init(NXP_CCI_ADDR, cci_map, ARRAY_SIZE(cci_map));
+
+	/* Enable Interconnect coherency for the primary CPU's cluster. */
+	plat_ls_interconnect_enter_coherency(num_clusters);
+
+	/* Set platform security policies */
+	_set_platform_security();
+
+	/* Init SEC Engine which will be used by SiP */
+	if (is_sec_enabled()) {
+		sec_init(NXP_CAAM_ADDR);
+	} else {
+		INFO("SEC is disabled.\n");
+	}
+}
+
+#ifdef NXP_WDOG_RESTART
+static uint64_t wdog_interrupt_handler(uint32_t id, uint32_t flags,
+					  void *handle, void *cookie)
+{
+	uint8_t data = WDOG_RESET_FLAG;
+
+	wr_nv_app_data(WDT_RESET_FLAG_OFFSET,
+			(uint8_t *)&data, sizeof(data));
+
+	mmio_write_32(NXP_RST_ADDR + RSTCNTL_OFFSET, SW_RST_REQ_INIT);
+
+	return 0;
+}
+#endif
+
+void soc_runtime_setup(void)
+{
+#ifdef NXP_WDOG_RESTART
+	request_intr_type_el3(BL31_NS_WDOG_WS1, wdog_interrupt_handler);
+#endif
+}
+
+/* This function returns the total number of cores in the SoC. */
+unsigned int get_tot_num_cores(void)
+{
+	uint8_t num_clusters, cores_per_cluster;
+
+	get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+	return (num_clusters * cores_per_cluster);
+}
+
+/* This function returns the PMU IDLE Cluster mask. */
+unsigned int get_pmu_idle_cluster_mask(void)
+{
+	uint8_t num_clusters, cores_per_cluster;
+
+	get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+	return ((1 << num_clusters) - 2);
+}
+
+/* This function returns the PMU Flush Cluster mask. */
+unsigned int get_pmu_flush_cluster_mask(void)
+{
+	uint8_t num_clusters, cores_per_cluster;
+
+	get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+	return ((1 << num_clusters) - 2);
+}
+
+/* This function returns the PMU idle core mask. */
+unsigned int get_pmu_idle_core_mask(void)
+{
+	return ((1 << get_tot_num_cores()) - 2);
+}
+
+/* Function to return the SoC SYS CLK */
+unsigned int get_sys_clk(void)
+{
+	return NXP_SYSCLK_FREQ;
+}
+#endif
diff --git a/plat/nxp/soc-ls1028a/soc.def b/plat/nxp/soc-ls1028a/soc.def
new file mode 100644
index 0000000..e133982
--- /dev/null
+++ b/plat/nxp/soc-ls1028a/soc.def
@@ -0,0 +1,95 @@
+#
+# Copyright 2018-2021 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+#
+#------------------------------------------------------------------------------
+#
+# This file contains the basic architecture definitions that drive the build
+#
+# -----------------------------------------------------------------------------
+
+CORE_TYPE	:=	a72
+
+CACHE_LINE	:=	6
+
+# Set to GIC400 or GIC500
+GIC		:=	GIC500
+
+# Set to CCI400 or CCN504 or CCN508
+INTERCONNECT	:=	CCI400
+
+# Layerscape chassis level - set to 3=LSCH3 or 2=LSCH2
+CHASSIS		:=	3_2
+
+# TZC used is TZC380 or TZC400
+TZC_ID		:=	TZC400
+
+# CONSOLE is NS16550 or PL011
+CONSOLE		:=	NS16550
+
+# DDR PHY generation to be used
+PLAT_DDR_PHY	:=	PHY_GEN1
+
+PHYS_SYS	:=	64
+
+# Max Size of CSF header. Required to define BL2 TEXT LIMIT in soc.def
+# Input to CST create_hdr_esbc tool
+CSF_HDR_SZ	:=	0x3000
+
+# In IMAGE_BL2, compile time flag for handling Cache coherency
+# with CAAM for BL2 running from OCRAM
+SEC_MEM_NON_COHERENT	:=	yes
+
+# OCRAM MAP for BL2
+# Before BL2
+# 0x18000000 - 0x18009fff -> Used by ROM code
+# 0x1800a000 - 0x1800dfff -> CSF header for BL2
+# For FlexSFlexSPI boot
+# 0x1800e000 - 0x18040000 -> Reserved for BL2 binary
+# For SD boot
+# 0x1800e000 - 0x18030000 -> Reserved for BL2 binary
+# 0x18030000 - 0x18040000 -> Reserved for SD buffer
+OCRAM_START_ADDR	:=	0x18000000
+OCRAM_SIZE		:=	0x40000
+
+# Area of OCRAM reserved by ROM code
+NXP_ROM_RSVD	:=	0xa000
+
+# Location of BL2 on OCRAM
+BL2_BASE_ADDR	:=	$(shell echo $$(( $(OCRAM_START_ADDR) + $(NXP_ROM_RSVD) + $(CSF_HDR_SZ) )))
+
+# Covert to HEX to be used by create_pbl.mk
+BL2_BASE	:=	$(shell echo "0x"$$(echo "obase=16; ${BL2_BASE_ADDR}" | bc))
+
+# BL2_HDR_LOC is at  (BL2_BASE + NXP_ROM_RSVD)
+# This value BL2_HDR_LOC + CSF_HDR_SZ should not
+# overalp with BL2_BASE
+# Input to CST create_hdr_isbc tool
+BL2_HDR_LOC	:=	0x1800A000
+
+# SoC ERRATAS to be enabled
+ERRATA_SOC_A008850	:=	1
+
+ERRATA_DDR_A009803	:=	1
+ERRATA_DDR_A009942	:=	1
+ERRATA_DDR_A010165	:=	1
+
+# Enable dynamic memory mapping
+PLAT_XLAT_TABLES_DYNAMIC	:=	1
+
+# Define Endianness of each module
+NXP_GUR_ENDIANNESS	:=	LE
+NXP_DDR_ENDIANNESS	:=	LE
+NXP_SEC_ENDIANNESS	:=	LE
+NXP_SFP_ENDIANNESS	:=	LE
+NXP_SNVS_ENDIANNESS	:=	LE
+NXP_ESDHC_ENDIANNESS	:=	LE
+NXP_QSPI_ENDIANNESS	:=	LE
+NXP_FSPI_ENDIANNESS	:=	LE
+
+NXP_SFP_VER		:=	3_4
+
+# OCRAM ECC Enabled
+OCRAM_ECC_EN		:=	yes
diff --git a/plat/nxp/soc-ls1028a/soc.mk b/plat/nxp/soc-ls1028a/soc.mk
new file mode 100644
index 0000000..92d8e98
--- /dev/null
+++ b/plat/nxp/soc-ls1028a/soc.mk
@@ -0,0 +1,113 @@
+#
+# Copyright 2020-2021 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# SoC-specific build parameters
+SOC			:=	ls1028a
+PLAT_PATH		:=	plat/nxp
+PLAT_COMMON_PATH	:=	plat/nxp/common
+PLAT_DRIVERS_PATH	:=	drivers/nxp
+PLAT_SOC_PATH		:=	${PLAT_PATH}/soc-${SOC}
+BOARD_PATH		:=	${PLAT_SOC_PATH}/${BOARD}
+
+# Get SoC-specific definitions
+include ${PLAT_SOC_PATH}/soc.def
+include ${PLAT_COMMON_PATH}/plat_make_helper/soc_common_def.mk
+include ${PLAT_COMMON_PATH}/plat_make_helper/plat_build_macros.mk
+
+ifeq (${TRUSTED_BOARD_BOOT},1)
+$(eval $(call SET_NXP_MAKE_FLAG,SMMU_NEEDED,BL2))
+$(eval $(call SET_NXP_MAKE_FLAG,SFP_NEEDED,BL2))
+$(eval $(call SET_NXP_MAKE_FLAG,SNVS_NEEDED,BL2))
+SECURE_BOOT := yes
+endif
+$(eval $(call SET_NXP_MAKE_FLAG,CRYPTO_NEEDED,BL_COMM))
+
+$(eval $(call SET_NXP_MAKE_FLAG,DCFG_NEEDED,BL_COMM))
+$(eval $(call SET_NXP_MAKE_FLAG,TIMER_NEEDED,BL_COMM))
+$(eval $(call SET_NXP_MAKE_FLAG,INTERCONNECT_NEEDED,BL_COMM))
+$(eval $(call SET_NXP_MAKE_FLAG,GIC_NEEDED,BL31))
+$(eval $(call SET_NXP_MAKE_FLAG,CONSOLE_NEEDED,BL_COMM))
+$(eval $(call SET_NXP_MAKE_FLAG,PMU_NEEDED,BL_COMM))
+$(eval $(call SET_NXP_MAKE_FLAG,DDR_DRIVER_NEEDED,BL2))
+$(eval $(call SET_NXP_MAKE_FLAG,TZASC_NEEDED,BL2))
+$(eval $(call SET_NXP_MAKE_FLAG,I2C_NEEDED,BL2))
+$(eval $(call SET_NXP_MAKE_FLAG,IMG_LOADR_NEEDED,BL2))
+
+# Selecting PSCI & SIP_SVC support
+$(eval $(call SET_NXP_MAKE_FLAG,PSCI_NEEDED,BL31))
+$(eval $(call SET_NXP_MAKE_FLAG,SIPSVC_NEEDED,BL31))
+
+PLAT_INCLUDES		+=	-I${PLAT_COMMON_PATH}/include/default\
+				-I${BOARD_PATH}\
+				-I${PLAT_COMMON_PATH}/include/default/ch_${CHASSIS}\
+				-I${PLAT_SOC_PATH}/include\
+				-I${PLAT_COMMON_PATH}/soc_errata
+
+ifeq (${SECURE_BOOT},yes)
+include ${PLAT_COMMON_PATH}/tbbr/tbbr.mk
+endif
+
+ifeq ($(WARM_BOOT),yes)
+include ${PLAT_COMMON_PATH}/warm_reset/warm_reset.mk
+endif
+
+ifeq (${NXP_NV_SW_MAINT_LAST_EXEC_DATA}, yes)
+include ${PLAT_COMMON_PATH}/nv_storage/nv_storage.mk
+endif
+
+ifeq (${PSCI_NEEDED}, yes)
+include ${PLAT_COMMON_PATH}/psci/psci.mk
+endif
+
+ifeq (${SIPSVC_NEEDED}, yes)
+include ${PLAT_COMMON_PATH}/sip_svc/sipsvc.mk
+endif
+
+ifeq (${DDR_FIP_IO_NEEDED}, yes)
+include ${PLAT_COMMON_PATH}/fip_handler/ddr_fip/ddr_fip_io.mk
+endif
+
+# For fuse-fip & fuse-programming
+ifeq (${FUSE_PROG}, 1)
+include ${PLAT_COMMON_PATH}/fip_handler/fuse_fip/fuse.mk
+endif
+
+ifeq (${IMG_LOADR_NEEDED},yes)
+include $(PLAT_COMMON_PATH)/img_loadr/img_loadr.mk
+endif
+
+# Adding source files for the above selected drivers.
+include ${PLAT_DRIVERS_PATH}/drivers.mk
+
+# Adding SoC specific files
+include ${PLAT_COMMON_PATH}/soc_errata/errata.mk
+
+PLAT_INCLUDES		+=	${NV_STORAGE_INCLUDES}\
+				${WARM_RST_INCLUDES}
+
+BL31_SOURCES		+=	${PLAT_SOC_PATH}/$(ARCH)/${SOC}.S\
+				${WARM_RST_BL31_SOURCES}\
+				${PSCI_SOURCES}\
+				${SIPSVC_SOURCES}\
+				${PLAT_COMMON_PATH}/$(ARCH)/bl31_data.S
+
+PLAT_BL_COMMON_SOURCES	+=	${PLAT_COMMON_PATH}/$(ARCH)/ls_helpers.S\
+				${PLAT_SOC_PATH}/aarch64/${SOC}_helpers.S\
+				${NV_STORAGE_SOURCES}\
+				${WARM_RST_BL_COMM_SOURCES}\
+				${PLAT_SOC_PATH}/soc.c
+
+ifeq (${TEST_BL31}, 1)
+BL31_SOURCES	+=	${PLAT_SOC_PATH}/$(ARCH)/bootmain64.S \
+			${PLAT_SOC_PATH}/$(ARCH)/nonboot64.S
+endif
+
+BL2_SOURCES		+=	${DDR_CNTLR_SOURCES}\
+				${TBBR_SOURCES}\
+				${FUSE_SOURCES}
+
+# Adding TFA setup files
+include ${PLAT_PATH}/common/setup/common.mk
diff --git a/plat/st/stm32mp1/stm32mp1_def.h b/plat/st/stm32mp1/stm32mp1_def.h
index 0d36660..469c2d9 100644
--- a/plat/st/stm32mp1/stm32mp1_def.h
+++ b/plat/st/stm32mp1/stm32mp1_def.h
@@ -205,6 +205,8 @@
 #define DEBUG_UART_TX_CLKSRC		RCC_UART24CKSELR_HSI
 #define DEBUG_UART_TX_EN_REG		RCC_MP_APB1ENSETR
 #define DEBUG_UART_TX_EN		RCC_MP_APB1ENSETR_UART4EN
+#define DEBUG_UART_RST_REG		RCC_APB1RSTSETR
+#define DEBUG_UART_RST_BIT		RCC_APB1RSTSETR_UART4RST
 
 /*******************************************************************************
  * STM32MP1 ETZPC
diff --git a/plat/st/stm32mp1/stm32mp1_helper.S b/plat/st/stm32mp1/stm32mp1_helper.S
index 84e9e8d..cac9752 100644
--- a/plat/st/stm32mp1/stm32mp1_helper.S
+++ b/plat/st/stm32mp1/stm32mp1_helper.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2021, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -148,6 +148,19 @@
 	 * ---------------------------------------------
 	 */
 func plat_crash_console_init
+	/* Reset UART peripheral */
+	ldr	r1, =(RCC_BASE + DEBUG_UART_RST_REG)
+	ldr	r2, =DEBUG_UART_RST_BIT
+	str	r2, [r1]
+1:
+	ldr	r0, [r1]
+	ands	r2, r0, r2
+	beq	1b
+	str	r2, [r1, #4] /* RSTCLR register */
+2:
+	ldr	r0, [r1]
+	ands	r2, r0, r2
+	bne	2b
 	/* Enable GPIOs for UART TX */
 	ldr	r1, =(RCC_BASE + DEBUG_UART_TX_GPIO_BANK_CLK_REG)
 	ldr	r2, [r1]
diff --git a/services/std_svc/spmd/spmd_main.c b/services/std_svc/spmd/spmd_main.c
index dda127f..6de5feb 100644
--- a/services/std_svc/spmd/spmd_main.c
+++ b/services/std_svc/spmd/spmd_main.c
@@ -65,14 +65,6 @@
 }
 
 /*******************************************************************************
- * SPM Core entry point information get helper.
- ******************************************************************************/
-entry_point_info_t *spmd_spmc_ep_info_get(void)
-{
-	return spmc_ep_info;
-}
-
-/*******************************************************************************
  * SPM Core ID getter.
  ******************************************************************************/
 uint16_t spmd_spmc_id_get(void)
@@ -156,18 +148,11 @@
 {
 	spmd_spm_core_context_t *ctx = spmd_get_context();
 	uint64_t rc;
-	unsigned int linear_id = plat_my_core_pos();
-	unsigned int core_id;
 
 	VERBOSE("SPM Core init start.\n");
-	ctx->state = SPMC_STATE_ON_PENDING;
 
-	/* Set the SPMC context state on other CPUs to OFF */
-	for (core_id = 0U; core_id < PLATFORM_CORE_COUNT; core_id++) {
-		if (core_id != linear_id) {
-			spm_core_context[core_id].state = SPMC_STATE_OFF;
-		}
-	}
+	/* Primary boot core enters the SPMC for initialization. */
+	ctx->state = SPMC_STATE_ON_PENDING;
 
 	rc = spmd_spm_core_sync_entry(ctx);
 	if (rc != 0ULL) {
@@ -187,7 +172,8 @@
  ******************************************************************************/
 static int spmd_spmc_init(void *pm_addr)
 {
-	spmd_spm_core_context_t *spm_ctx = spmd_get_context();
+	cpu_context_t *cpu_ctx;
+	unsigned int core_id;
 	uint32_t ep_attr;
 	int rc;
 
@@ -280,13 +266,21 @@
 					     DISABLE_ALL_EXCEPTIONS);
 	}
 
-	/* Initialise SPM Core context with this entry point information */
-	cm_setup_context(&spm_ctx->cpu_ctx, spmc_ep_info);
+	/* Set an initial SPMC context state for all cores. */
+	for (core_id = 0U; core_id < PLATFORM_CORE_COUNT; core_id++) {
+		spm_core_context[core_id].state = SPMC_STATE_OFF;
 
-	/* Reuse PSCI affinity states to mark this SPMC context as off */
-	spm_ctx->state = AFF_STATE_OFF;
+		/* Setup an initial cpu context for the SPMC. */
+		cpu_ctx = &spm_core_context[core_id].cpu_ctx;
+		cm_setup_context(cpu_ctx, spmc_ep_info);
 
-	INFO("SPM Core setup done.\n");
+		/*
+		 * Pass the core linear ID to the SPMC through x4.
+		 * (TF-A implementation defined behavior helping
+		 * a legacy TOS migration to adopt FF-A).
+		 */
+		write_ctx_reg(get_gpregs_ctx(cpu_ctx), CTX_GPREG_X4, core_id);
+	}
 
 	/* Register power management hooks with PSCI */
 	psci_register_spd_pm_hook(&spmd_pm);
@@ -294,6 +288,8 @@
 	/* Register init function for deferred init. */
 	bl31_register_bl32_init(&spmd_init);
 
+	INFO("SPM Core setup done.\n");
+
 	return 0;
 }
 
@@ -620,9 +616,19 @@
 	case FFA_RXTX_MAP_SMC64:
 	case FFA_RXTX_UNMAP:
 	case FFA_PARTITION_INFO_GET:
+#if MAKE_FFA_VERSION(1, 1) <= FFA_VERSION_COMPILED
+	case FFA_NOTIFICATION_BITMAP_CREATE:
+	case FFA_NOTIFICATION_BITMAP_DESTROY:
+	case FFA_NOTIFICATION_BIND:
+	case FFA_NOTIFICATION_UNBIND:
+	case FFA_NOTIFICATION_SET:
+	case FFA_NOTIFICATION_GET:
+	case FFA_NOTIFICATION_INFO_GET:
+	case FFA_NOTIFICATION_INFO_GET_SMC64:
+#endif
 		/*
-		 * Should not be allowed to forward FFA_PARTITION_INFO_GET
-		 * from Secure world to Normal world
+		 * Above calls should not be forwarded from Secure world to
+		 * Normal world.
 		 *
 		 * Fall through to forward the call to the other world
 		 */
diff --git a/services/std_svc/spmd/spmd_pm.c b/services/std_svc/spmd/spmd_pm.c
index 074609c..ac962ea 100644
--- a/services/std_svc/spmd/spmd_pm.c
+++ b/services/std_svc/spmd/spmd_pm.c
@@ -75,14 +75,14 @@
  ******************************************************************************/
 static void spmd_cpu_on_finish_handler(u_register_t unused)
 {
-	entry_point_info_t *spmc_ep_info = spmd_spmc_ep_info_get();
 	spmd_spm_core_context_t *ctx = spmd_get_context();
 	unsigned int linear_id = plat_my_core_pos();
+	el3_state_t *el3_state;
+	uintptr_t entry_point;
 	uint64_t rc;
 
 	assert(ctx != NULL);
 	assert(ctx->state != SPMC_STATE_ON);
-	assert(spmc_ep_info != NULL);
 
 	spin_lock(&g_spmd_pm.lock);
 
@@ -92,14 +92,20 @@
 	 * primary core address for booting secondary cores.
 	 */
 	if (g_spmd_pm.secondary_ep_locked == true) {
-		spmc_ep_info->pc = g_spmd_pm.secondary_ep;
+		/*
+		 * The CPU context has already been initialized at boot time
+		 * (in spmd_spmc_init by a call to cm_setup_context). Adjust
+		 * below the target core entry point based on the address
+		 * passed to by FFA_SECONDARY_EP_REGISTER.
+		 */
+		entry_point = g_spmd_pm.secondary_ep;
+		el3_state = get_el3state_ctx(&ctx->cpu_ctx);
+		write_ctx_reg(el3_state, CTX_ELR_EL3, entry_point);
 	}
 
 	spin_unlock(&g_spmd_pm.lock);
 
-	cm_setup_context(&ctx->cpu_ctx, spmc_ep_info);
-
-	/* Mark CPU as initiating ON operation */
+	/* Mark CPU as initiating ON operation. */
 	ctx->state = SPMC_STATE_ON_PENDING;
 
 	rc = spmd_spm_core_sync_entry(ctx);
diff --git a/tools/sptool/sp_mk_generator.py b/tools/sptool/sp_mk_generator.py
index a37e702..f983ff3 100755
--- a/tools/sptool/sp_mk_generator.py
+++ b/tools/sptool/sp_mk_generator.py
@@ -1,5 +1,5 @@
 #!/usr/bin/python3
-# Copyright (c) 2020, Arm Limited. All rights reserved.
+# Copyright (c) 2020-2021, Arm Limited. All rights reserved.
 #
 # SPDX-License-Identifier: BSD-3-Clause
 
@@ -110,24 +110,36 @@
         Extract uuid from partition manifest
         """
         pm_file = open(dts)
-        uuid_key = "uuid"
-
         for line in pm_file:
-            if uuid_key in line:
-                uuid_hex = re.findall(r'\<(.+?)\>', line)[0];
+            if "uuid" in line:
+                # re.findall returns a list of string tuples.
+                # uuid_hex is the first item in this list representing the four
+                # uuid hex integers from the manifest uuid field. The heading
+                # '0x' of the hexadecimal representation is stripped out.
+                # e.g. uuid = <0x1e67b5b4 0xe14f904a 0x13fb1fb8 0xcbdae1da>;
+                # uuid_hex = ('1e67b5b4', 'e14f904a', '13fb1fb8', 'cbdae1da')
+                uuid_hex = re.findall(r'0x([0-9a-f]+) 0x([0-9a-f]+) 0x([0-9a-f]+) 0x([0-9a-f]+)', line)[0];
 
-        # PM has uuid in format 0xABC... 0x... 0x... 0x...
-        # Get rid of '0x' and spaces and convert to string of hex digits
-        uuid_hex = uuid_hex.replace('0x','').replace(' ','')
-        # make UUID from a string of hex digits
-        uuid_std = uuid.UUID(uuid_hex)
-        # convert UUID to a string of hex digits in standard form
-        uuid_std = str(uuid_std)
+        # uuid_hex is a list of four hex string values
+        if len(uuid_hex) != 4:
+            print("ERROR: malformed UUID")
+            exit(-1)
+
+        # The uuid field in SP manifest is the little endian representation
+        # mapped to arguments as described in SMCCC section 5.3.
+        # Convert each unsigned integer value to a big endian representation
+        # required by fiptool.
+        y=list(map(bytearray.fromhex, uuid_hex))
+        z=(int.from_bytes(y[0], byteorder='little', signed=False),
+        int.from_bytes(y[1], byteorder='little', signed=False),
+        int.from_bytes(y[2], byteorder='little', signed=False),
+        int.from_bytes(y[3], byteorder='little', signed=False))
+        uuid_std = uuid.UUID(f'{z[0]:04x}{z[1]:04x}{z[2]:04x}{z[3]:04x}')
 
         """
         Append FIP_ARGS
         """
-        out_file.write("FIP_ARGS += --blob uuid=" + uuid_std + ",file=" + dst + "\n")
+        out_file.write("FIP_ARGS += --blob uuid=" + str(uuid_std) + ",file=" + dst + "\n")
 
         """
         Append CRT_ARGS