diff --git a/include/lib/xlat_tables/aarch32/xlat_tables_aarch32.h b/include/lib/xlat_tables/aarch32/xlat_tables_aarch32.h
new file mode 100644
index 0000000..28be8e3
--- /dev/null
+++ b/include/lib/xlat_tables/aarch32/xlat_tables_aarch32.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __XLAT_TABLES_AARCH32_H__
+#define __XLAT_TABLES_AARCH32_H__
+
+#include <arch.h>
+#include <utils_def.h>
+#include <xlat_tables_defs.h>
+
+#if !defined(PAGE_SIZE)
+#error "PAGE_SIZE is not defined."
+#endif
+
+/*
+ * In AArch32 state, the MMU only supports 4KB page granularity, which means
+ * that the first translation table level is either 1 or 2. Both of them are
+ * allowed to have block and table descriptors. See section G4.5.6 of the
+ * ARMv8-A Architecture Reference Manual (DDI 0487A.k) for more information.
+ *
+ * The define below specifies the first table level that allows block
+ * descriptors.
+ */
+#if PAGE_SIZE != (4 * 1024)
+#error "Invalid granule size. AArch32 supports 4KB pages only."
+#endif
+
+#define MIN_LVL_BLOCK_DESC 1
+
+#define XLAT_TABLE_LEVEL_MIN	U(1)
+
+/*
+ * Define the architectural limits of the virtual address space in AArch32
+ * state.
+ *
+ * TTBCR.TxSZ is calculated as 32 minus the width of said address space. The
+ * value of TTBCR.TxSZ must be in the range 0 to 7 [1], which means that the
+ * virtual address space width must be in the range 32 to 25 bits.
+ *
+ * [1] See the ARMv8-A Architecture Reference Manual (DDI 0487A.j) for more
+ * information, Section G4.6.5
+ */
+#define MIN_VIRT_ADDR_SPACE_SIZE	(1      << (32 - TTBCR_TxSZ_MAX))
+#define MAX_VIRT_ADDR_SPACE_SIZE	(ULL(1) << (32 - TTBCR_TxSZ_MIN))
+
+/*
+ * Here we calculate the initial lookup level from the value of the given
+ * virtual address space size. For a 4 KB page size,
+ * - level 1 supports virtual address spaces of widths 32 to 31 bits;
+ * - level 2 from 30 to 25.
+ *
+ * Wider or narrower address spaces are not supported. As a result, level 3
+ * cannot be used as the initial lookup level with 4 KB granularity.
+ * See the ARMv8-A Architecture Reference Manual (DDI 0487A.j) for more
+ * information, Section G4.6.5
+ *
+ * For example, for a 31-bit address space (i.e. virt_addr_space_size ==
+ * 1 << 31), TTBCR.TxSZ will be programmed to (32 - 31) = 1. According to Table
+ * G4-5 in the ARM ARM, the initial lookup level for an address space like that
+ * is 1.
+ *
+ * Note that this macro assumes that the given virtual address space size is
+ * valid. Therefore, the caller is expected to check it is the case using the
+ * CHECK_VIRT_ADDR_SPACE_SIZE() macro first.
+ */
+#define GET_XLAT_TABLE_LEVEL_BASE(virt_addr_space_size)			\
+	(((virt_addr_space_size) > (1 << L1_XLAT_ADDRESS_SHIFT)) ? 1 : 2)
+
+#endif /* __XLAT_TABLES_AARCH32_H__ */
diff --git a/include/lib/xlat_tables/aarch64/xlat_tables_aarch64.h b/include/lib/xlat_tables/aarch64/xlat_tables_aarch64.h
new file mode 100644
index 0000000..9cad035
--- /dev/null
+++ b/include/lib/xlat_tables/aarch64/xlat_tables_aarch64.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __XLAT_TABLES_AARCH64_H__
+#define __XLAT_TABLES_AARCH64_H__
+
+#include <arch.h>
+#include <utils_def.h>
+#include <xlat_tables_defs.h>
+
+#if !defined(PAGE_SIZE)
+#error "PAGE_SIZE is not defined."
+#endif
+
+/*
+ * In AArch64 state, the MMU may support 4 KB, 16 KB and 64 KB page
+ * granularity. For 4KB granularity, a level 0 table descriptor doesn't support
+ * block translation. For 16KB, the same thing happens to levels 0 and 1. For
+ * 64KB, same for level 1. See section D4.3.1 of the ARMv8-A Architecture
+ * Reference Manual (DDI 0487A.k) for more information.
+ *
+ * The define below specifies the first table level that allows block
+ * descriptors.
+ */
+#if PAGE_SIZE == (4 * 1024)
+# define MIN_LVL_BLOCK_DESC 1
+#elif PAGE_SIZE == (16 * 1024) || PAGE_SIZE == (64 * 1024)
+# define MIN_LVL_BLOCK_DESC 2
+#endif
+
+#define XLAT_TABLE_LEVEL_MIN	U(0)
+
+/*
+ * Define the architectural limits of the virtual address space in AArch64
+ * state.
+ *
+ * TCR.TxSZ is calculated as 64 minus the width of said address space.
+ * The value of TCR.TxSZ must be in the range 16 to 39 [1], which means that
+ * the virtual address space width must be in the range 48 to 25 bits.
+ *
+ * [1] See the ARMv8-A Architecture Reference Manual (DDI 0487A.j) for more
+ * information:
+ * Page 1730: 'Input address size', 'For all translation stages'.
+ */
+#define MIN_VIRT_ADDR_SPACE_SIZE	(1      << (64 - TCR_TxSZ_MAX))
+#define MAX_VIRT_ADDR_SPACE_SIZE	(ULL(1) << (64 - TCR_TxSZ_MIN))
+
+/*
+ * Here we calculate the initial lookup level from the value of the given
+ * virtual address space size. For a 4 KB page size,
+ * - level 0 supports virtual address spaces of widths 48 to 40 bits;
+ * - level 1 from 39 to 31;
+ * - level 2 from 30 to 25.
+ *
+ * Wider or narrower address spaces are not supported. As a result, level 3
+ * cannot be used as initial lookup level with 4 KB granularity. See section
+ * D4.2.5 in the ARMv8-A Architecture Reference Manual (DDI 0487A.j) for more
+ * information.
+ *
+ * For example, for a 35-bit address space (i.e. virt_addr_space_size ==
+ * 1 << 35), TCR.TxSZ will be programmed to (64 - 35) = 29. According to Table
+ * D4-11 in the ARM ARM, the initial lookup level for an address space like that
+ * is 1.
+ *
+ * Note that this macro assumes that the given virtual address space size is
+ * valid. Therefore, the caller is expected to check it is the case using the
+ * CHECK_VIRT_ADDR_SPACE_SIZE() macro first.
+ */
+#define GET_XLAT_TABLE_LEVEL_BASE(virt_addr_space_size)				\
+	(((virt_addr_space_size) > (ULL(1) << L0_XLAT_ADDRESS_SHIFT))		\
+	? 0									\
+	: (((virt_addr_space_size) > (1 << L1_XLAT_ADDRESS_SHIFT)) ? 1 : 2))
+
+#endif /* __XLAT_TABLES_AARCH64_H__ */
diff --git a/include/lib/xlat_tables/xlat_tables_arch.h b/include/lib/xlat_tables/xlat_tables_arch.h
new file mode 100644
index 0000000..165b161d
--- /dev/null
+++ b/include/lib/xlat_tables/xlat_tables_arch.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __XLAT_TABLES_ARCH_H__
+#define __XLAT_TABLES_ARCH_H__
+
+#ifdef AARCH32
+#include "aarch32/xlat_tables_aarch32.h"
+#else
+#include "aarch64/xlat_tables_aarch64.h"
+#endif
+
+/*
+ * Evaluates to 1 if the given virtual address space size is valid, or 0 if it's
+ * not.
+ *
+ * A valid size is one that is a power of 2 and is within the architectural
+ * limits. Not that these limits are different for AArch32 and AArch64.
+ */
+#define CHECK_VIRT_ADDR_SPACE_SIZE(size)			\
+	(((size) >= MIN_VIRT_ADDR_SPACE_SIZE) &&		\
+	((size) <= MAX_VIRT_ADDR_SPACE_SIZE) &&			\
+	IS_POWER_OF_TWO(size))
+
+/*
+ * Evaluates to 1 if the given physical address space size is a power of 2,
+ * or 0 if it's not.
+ */
+#define CHECK_PHY_ADDR_SPACE_SIZE(size)				\
+	(IS_POWER_OF_TWO(size))
+
+/*
+ * Compute the number of entries required at the initial lookup level to address
+ * the whole virtual address space.
+ */
+#define GET_NUM_BASE_LEVEL_ENTRIES(addr_space_size)			\
+	((addr_space_size) >>						\
+		XLAT_ADDR_SHIFT(GET_XLAT_TABLE_LEVEL_BASE(addr_space_size)))
+
+#endif /* __XLAT_TABLES_ARCH_H__ */
diff --git a/include/lib/xlat_tables/xlat_tables_defs.h b/include/lib/xlat_tables/xlat_tables_defs.h
index 4b993a0..779532e 100644
--- a/include/lib/xlat_tables/xlat_tables_defs.h
+++ b/include/lib/xlat_tables/xlat_tables_defs.h
@@ -59,12 +59,6 @@
 #define XLAT_TABLE_SIZE_SHIFT	PAGE_SIZE_SHIFT /* Size of one complete table */
 #define XLAT_TABLE_SIZE		(U(1) << XLAT_TABLE_SIZE_SHIFT)
 
-#ifdef AARCH32
-#define XLAT_TABLE_LEVEL_MIN	U(1)
-#else
-#define XLAT_TABLE_LEVEL_MIN	U(0)
-#endif /* AARCH32 */
-
 #define XLAT_TABLE_LEVEL_MAX	U(3)
 
 /* Values for number of entries in each MMU translation table */
diff --git a/lib/xlat_tables/aarch32/xlat_tables.c b/lib/xlat_tables/aarch32/xlat_tables.c
index 9c15624..71db2d5 100644
--- a/lib/xlat_tables/aarch32/xlat_tables.c
+++ b/lib/xlat_tables/aarch32/xlat_tables.c
@@ -7,56 +7,17 @@
 #include <arch.h>
 #include <arch_helpers.h>
 #include <assert.h>
-#include <cassert.h>
 #include <platform_def.h>
 #include <utils.h>
+#include <xlat_tables_arch.h>
 #include <xlat_tables.h>
 #include "../xlat_tables_private.h"
 
-/*
- * Each platform can define the size of the virtual address space, which is
- * defined in PLAT_VIRT_ADDR_SPACE_SIZE. TTBCR.TxSZ is calculated as 32 minus
- * the width of said address space. The value of TTBCR.TxSZ must be in the
- * range 0 to 7 [1], which means that the virtual address space width must be
- * in the range 32 to 25 bits.
- *
- * Here we calculate the initial lookup level from the value of
- * PLAT_VIRT_ADDR_SPACE_SIZE. For a 4 KB page size, level 1 supports virtual
- * address spaces of widths 32 to 31 bits, and level 2 from 30 to 25. Wider or
- * narrower address spaces are not supported. As a result, level 3 cannot be
- * used as initial lookup level with 4 KB granularity [1].
- *
- * For example, for a 31-bit address space (i.e. PLAT_VIRT_ADDR_SPACE_SIZE ==
- * 1 << 31), TTBCR.TxSZ will be programmed to (32 - 31) = 1. According to Table
- * G4-5 in the ARM ARM, the initial lookup level for an address space like that
- * is 1.
- *
- * See the ARMv8-A Architecture Reference Manual (DDI 0487A.j) for more
- * information:
- * [1] Section G4.6.5
- */
+#define XLAT_TABLE_LEVEL_BASE	\
+       GET_XLAT_TABLE_LEVEL_BASE(PLAT_VIRT_ADDR_SPACE_SIZE)
 
-#if PLAT_VIRT_ADDR_SPACE_SIZE > (1ULL << (32 - TTBCR_TxSZ_MIN))
-
-# error "PLAT_VIRT_ADDR_SPACE_SIZE is too big."
-
-#elif PLAT_VIRT_ADDR_SPACE_SIZE > (1 << L1_XLAT_ADDRESS_SHIFT)
-
-# define XLAT_TABLE_LEVEL_BASE	1
-# define NUM_BASE_LEVEL_ENTRIES	\
-		(PLAT_VIRT_ADDR_SPACE_SIZE >> L1_XLAT_ADDRESS_SHIFT)
-
-#elif PLAT_VIRT_ADDR_SPACE_SIZE >= (1 << (32 - TTBCR_TxSZ_MAX))
-
-# define XLAT_TABLE_LEVEL_BASE	2
-# define NUM_BASE_LEVEL_ENTRIES	\
-		(PLAT_VIRT_ADDR_SPACE_SIZE >> L2_XLAT_ADDRESS_SHIFT)
-
-#else
-
-# error "PLAT_VIRT_ADDR_SPACE_SIZE is too small."
-
-#endif
+#define NUM_BASE_LEVEL_ENTRIES	\
+       GET_NUM_BASE_LEVEL_ENTRIES(PLAT_VIRT_ADDR_SPACE_SIZE)
 
 static uint64_t base_xlation_table[NUM_BASE_LEVEL_ENTRIES]
 		__aligned(NUM_BASE_LEVEL_ENTRIES * sizeof(uint64_t));
diff --git a/lib/xlat_tables/aarch64/xlat_tables.c b/lib/xlat_tables/aarch64/xlat_tables.c
index 309cb9b..4125651 100644
--- a/lib/xlat_tables/aarch64/xlat_tables.c
+++ b/lib/xlat_tables/aarch64/xlat_tables.c
@@ -8,66 +8,19 @@
 #include <arch_helpers.h>
 #include <assert.h>
 #include <bl_common.h>
-#include <cassert.h>
 #include <common_def.h>
 #include <platform_def.h>
 #include <sys/types.h>
 #include <utils.h>
 #include <xlat_tables.h>
+#include <xlat_tables_arch.h>
 #include "../xlat_tables_private.h"
 
-/*
- * Each platform can define the size of the virtual address space, which is
- * defined in PLAT_VIRT_ADDR_SPACE_SIZE. TCR.TxSZ is calculated as 64 minus the
- * width of said address space. The value of TCR.TxSZ must be in the range 16
- * to 39 [1], which means that the virtual address space width must be in the
- * range 48 to 25 bits.
- *
- * Here we calculate the initial lookup level from the value of
- * PLAT_VIRT_ADDR_SPACE_SIZE. For a 4 KB page size, level 0 supports virtual
- * address spaces of widths 48 to 40 bits, level 1 from 39 to 31, and level 2
- * from 30 to 25. Wider or narrower address spaces are not supported. As a
- * result, level 3 cannot be used as initial lookup level with 4 KB
- * granularity. [2]
- *
- * For example, for a 35-bit address space (i.e. PLAT_VIRT_ADDR_SPACE_SIZE ==
- * 1 << 35), TCR.TxSZ will be programmed to (64 - 35) = 29. According to Table
- * D4-11 in the ARM ARM, the initial lookup level for an address space like
- * that is 1.
- *
- * See the ARMv8-A Architecture Reference Manual (DDI 0487A.j) for more
- * information:
- * [1] Page 1730: 'Input address size', 'For all translation stages'.
- * [2] Section D4.2.5
- */
+#define XLAT_TABLE_LEVEL_BASE	\
+       GET_XLAT_TABLE_LEVEL_BASE(PLAT_VIRT_ADDR_SPACE_SIZE)
 
-#if PLAT_VIRT_ADDR_SPACE_SIZE > (1ULL << (64 - TCR_TxSZ_MIN))
-
-# error "PLAT_VIRT_ADDR_SPACE_SIZE is too big."
-
-#elif PLAT_VIRT_ADDR_SPACE_SIZE > (1ULL << L0_XLAT_ADDRESS_SHIFT)
-
-# define XLAT_TABLE_LEVEL_BASE	0
-# define NUM_BASE_LEVEL_ENTRIES	\
-		(PLAT_VIRT_ADDR_SPACE_SIZE >> L0_XLAT_ADDRESS_SHIFT)
-
-#elif PLAT_VIRT_ADDR_SPACE_SIZE > (1 << L1_XLAT_ADDRESS_SHIFT)
-
-# define XLAT_TABLE_LEVEL_BASE	1
-# define NUM_BASE_LEVEL_ENTRIES	\
-		(PLAT_VIRT_ADDR_SPACE_SIZE >> L1_XLAT_ADDRESS_SHIFT)
-
-#elif PLAT_VIRT_ADDR_SPACE_SIZE >= (1 << (64 - TCR_TxSZ_MAX))
-
-# define XLAT_TABLE_LEVEL_BASE	2
-# define NUM_BASE_LEVEL_ENTRIES	\
-		(PLAT_VIRT_ADDR_SPACE_SIZE >> L2_XLAT_ADDRESS_SHIFT)
-
-#else
-
-# error "PLAT_VIRT_ADDR_SPACE_SIZE is too small."
-
-#endif
+#define NUM_BASE_LEVEL_ENTRIES	\
+       GET_NUM_BASE_LEVEL_ENTRIES(PLAT_VIRT_ADDR_SPACE_SIZE)
 
 static uint64_t base_xlation_table[NUM_BASE_LEVEL_ENTRIES]
 		__aligned(NUM_BASE_LEVEL_ENTRIES * sizeof(uint64_t));
diff --git a/lib/xlat_tables/xlat_tables_private.h b/lib/xlat_tables/xlat_tables_private.h
index b5c3ac8..50d6bd5 100644
--- a/lib/xlat_tables/xlat_tables_private.h
+++ b/lib/xlat_tables/xlat_tables_private.h
@@ -9,7 +9,7 @@
 
 #include <cassert.h>
 #include <platform_def.h>
-#include <utils_def.h>
+#include <xlat_tables_arch.h>
 
 /*
  * If the platform hasn't defined a physical and a virtual address space size
@@ -28,41 +28,14 @@
 # endif
 #endif
 
-/* The virtual and physical address space sizes must be powers of two. */
-CASSERT(IS_POWER_OF_TWO(PLAT_VIRT_ADDR_SPACE_SIZE),
+CASSERT(CHECK_VIRT_ADDR_SPACE_SIZE(PLAT_VIRT_ADDR_SPACE_SIZE),
 	assert_valid_virt_addr_space_size);
-CASSERT(IS_POWER_OF_TWO(PLAT_PHY_ADDR_SPACE_SIZE),
+
+CASSERT(CHECK_PHY_ADDR_SPACE_SIZE(PLAT_PHY_ADDR_SPACE_SIZE),
 	assert_valid_phy_addr_space_size);
 
-/*
- * In AArch32 state, the MMU only supports 4KB page granularity, which means
- * that the first translation table level is either 1 or 2. Both of them are
- * allowed to have block and table descriptors. See section G4.5.6 of the
- * ARMv8-A Architecture Reference Manual (DDI 0487A.k) for more information.
- *
- * In AArch64 state, the MMU may support 4 KB, 16 KB and 64 KB page
- * granularity. For 4KB granularity, a level 0 table descriptor doesn't support
- * block translation. For 16KB, the same thing happens to levels 0 and 1. For
- * 64KB, same for level 1. See section D4.3.1 of the ARMv8-A Architecture
- * Reference Manual (DDI 0487A.k) for more information.
- *
- * The define below specifies the first table level that allows block
- * descriptors.
- */
-
-#ifdef AARCH32
-
-# define XLAT_BLOCK_LEVEL_MIN 1
-
-#else /* if AArch64 */
-
-# if PAGE_SIZE == (4*1024) /* 4KB */
-#  define XLAT_BLOCK_LEVEL_MIN 1
-# else /* 16KB or 64KB */
-#  define XLAT_BLOCK_LEVEL_MIN 2
-# endif
-
-#endif /* AARCH32 */
+/* Alias to retain compatibility with the old #define name */
+#define XLAT_BLOCK_LEVEL_MIN	MIN_LVL_BLOCK_DESC
 
 void print_mmap(void);
 
diff --git a/lib/xlat_tables_v2/aarch32/xlat_tables_arch.h b/lib/xlat_tables_v2/aarch32/xlat_tables_arch.h
deleted file mode 100644
index f75ab79..0000000
--- a/lib/xlat_tables_v2/aarch32/xlat_tables_arch.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#ifndef __XLAT_TABLES_ARCH_H__
-#define __XLAT_TABLES_ARCH_H__
-
-#include <arch.h>
-#include <platform_def.h>
-#include <xlat_tables_defs.h>
-#include "../xlat_tables_private.h"
-
-/*
- * In AArch32 state, the MMU only supports 4KB page granularity, which means
- * that the first translation table level is either 1 or 2. Both of them are
- * allowed to have block and table descriptors. See section G4.5.6 of the
- * ARMv8-A Architecture Reference Manual (DDI 0487A.k) for more information.
- *
- * The define below specifies the first table level that allows block
- * descriptors.
- */
-
-#define MIN_LVL_BLOCK_DESC 1
-
-/*
- * Each platform can define the size of the virtual address space, which is
- * defined in PLAT_VIRT_ADDR_SPACE_SIZE. TTBCR.TxSZ is calculated as 32 minus
- * the width of said address space. The value of TTBCR.TxSZ must be in the
- * range 0 to 7 [1], which means that the virtual address space width must be
- * in the range 32 to 25 bits.
- *
- * Here we calculate the initial lookup level from the value of
- * PLAT_VIRT_ADDR_SPACE_SIZE. For a 4 KB page size, level 1 supports virtual
- * address spaces of widths 32 to 31 bits, and level 2 from 30 to 25. Wider or
- * narrower address spaces are not supported. As a result, level 3 cannot be
- * used as initial lookup level with 4 KB granularity [1].
- *
- * For example, for a 31-bit address space (i.e. PLAT_VIRT_ADDR_SPACE_SIZE ==
- * 1 << 31), TTBCR.TxSZ will be programmed to (32 - 31) = 1. According to Table
- * G4-5 in the ARM ARM, the initial lookup level for an address space like that
- * is 1.
- *
- * See the ARMv8-A Architecture Reference Manual (DDI 0487A.j) for more
- * information:
- * [1] Section G4.6.5
- */
-
-#if PLAT_VIRT_ADDR_SPACE_SIZE > (1ULL << (32 - TTBCR_TxSZ_MIN))
-
-# error "PLAT_VIRT_ADDR_SPACE_SIZE is too big."
-
-#elif PLAT_VIRT_ADDR_SPACE_SIZE > (1 << L1_XLAT_ADDRESS_SHIFT)
-
-# define XLAT_TABLE_LEVEL_BASE	1
-# define NUM_BASE_LEVEL_ENTRIES	\
-		(PLAT_VIRT_ADDR_SPACE_SIZE >> L1_XLAT_ADDRESS_SHIFT)
-
-#elif PLAT_VIRT_ADDR_SPACE_SIZE >= (1 << (32 - TTBCR_TxSZ_MAX))
-
-# define XLAT_TABLE_LEVEL_BASE	2
-# define NUM_BASE_LEVEL_ENTRIES	\
-		(PLAT_VIRT_ADDR_SPACE_SIZE >> L2_XLAT_ADDRESS_SHIFT)
-
-#else
-
-# error "PLAT_VIRT_ADDR_SPACE_SIZE is too small."
-
-#endif
-
-#endif /* __XLAT_TABLES_ARCH_H__ */
diff --git a/lib/xlat_tables_v2/aarch64/xlat_tables_arch.h b/lib/xlat_tables_v2/aarch64/xlat_tables_arch.h
deleted file mode 100644
index caccb73..0000000
--- a/lib/xlat_tables_v2/aarch64/xlat_tables_arch.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#ifndef __XLAT_TABLES_ARCH_H__
-#define __XLAT_TABLES_ARCH_H__
-
-#include <arch.h>
-#include <platform_def.h>
-#include <xlat_tables_defs.h>
-#include "../xlat_tables_private.h"
-
-/*
- * In AArch64 state, the MMU may support 4 KB, 16 KB and 64 KB page
- * granularity. For 4KB granularity, a level 0 table descriptor doesn't support
- * block translation. For 16KB, the same thing happens to levels 0 and 1. For
- * 64KB, same for level 1. See section D4.3.1 of the ARMv8-A Architecture
- * Reference Manual (DDI 0487A.k) for more information.
- *
- * The define below specifies the first table level that allows block
- * descriptors.
- */
-
-#if PAGE_SIZE == (4*1024) /* 4KB */
-# define MIN_LVL_BLOCK_DESC 1
-#else /* 16KB or 64KB */
-# define MIN_LVL_BLOCK_DESC 2
-#endif
-
-/*
- * Each platform can define the size of the virtual address space, which is
- * defined in PLAT_VIRT_ADDR_SPACE_SIZE. TCR.TxSZ is calculated as 64 minus the
- * width of said address space. The value of TCR.TxSZ must be in the range 16
- * to 39 [1], which means that the virtual address space width must be in the
- * range 48 to 25 bits.
- *
- * Here we calculate the initial lookup level from the value of
- * PLAT_VIRT_ADDR_SPACE_SIZE. For a 4 KB page size, level 0 supports virtual
- * address spaces of widths 48 to 40 bits, level 1 from 39 to 31, and level 2
- * from 30 to 25. Wider or narrower address spaces are not supported. As a
- * result, level 3 cannot be used as initial lookup level with 4 KB
- * granularity. [2]
- *
- * For example, for a 35-bit address space (i.e. PLAT_VIRT_ADDR_SPACE_SIZE ==
- * 1 << 35), TCR.TxSZ will be programmed to (64 - 35) = 29. According to Table
- * D4-11 in the ARM ARM, the initial lookup level for an address space like
- * that is 1.
- *
- * See the ARMv8-A Architecture Reference Manual (DDI 0487A.j) for more
- * information:
- * [1] Page 1730: 'Input address size', 'For all translation stages'.
- * [2] Section D4.2.5
- */
-
-#if PLAT_VIRT_ADDR_SPACE_SIZE > (1ULL << (64 - TCR_TxSZ_MIN))
-
-# error "PLAT_VIRT_ADDR_SPACE_SIZE is too big."
-
-#elif PLAT_VIRT_ADDR_SPACE_SIZE > (1ULL << L0_XLAT_ADDRESS_SHIFT)
-
-# define XLAT_TABLE_LEVEL_BASE	0
-# define NUM_BASE_LEVEL_ENTRIES	\
-		(PLAT_VIRT_ADDR_SPACE_SIZE >> L0_XLAT_ADDRESS_SHIFT)
-
-#elif PLAT_VIRT_ADDR_SPACE_SIZE > (1 << L1_XLAT_ADDRESS_SHIFT)
-
-# define XLAT_TABLE_LEVEL_BASE	1
-# define NUM_BASE_LEVEL_ENTRIES	\
-		(PLAT_VIRT_ADDR_SPACE_SIZE >> L1_XLAT_ADDRESS_SHIFT)
-
-#elif PLAT_VIRT_ADDR_SPACE_SIZE >= (1 << (64 - TCR_TxSZ_MAX))
-
-# define XLAT_TABLE_LEVEL_BASE	2
-# define NUM_BASE_LEVEL_ENTRIES	\
-		(PLAT_VIRT_ADDR_SPACE_SIZE >> L2_XLAT_ADDRESS_SHIFT)
-
-#else
-
-# error "PLAT_VIRT_ADDR_SPACE_SIZE is too small."
-
-#endif
-
-#endif /* __XLAT_TABLES_ARCH_H__ */
diff --git a/lib/xlat_tables_v2/xlat_tables_common.c b/lib/xlat_tables_v2/xlat_tables_common.c
index f20bf93..fce6017 100644
--- a/lib/xlat_tables_v2/xlat_tables_common.c
+++ b/lib/xlat_tables_v2/xlat_tables_common.c
@@ -15,15 +15,42 @@
 #include <string.h>
 #include <types.h>
 #include <utils.h>
+#include <xlat_tables_arch.h>
 #include <xlat_tables_v2.h>
-#ifdef AARCH32
-# include "aarch32/xlat_tables_arch.h"
-#else
-# include "aarch64/xlat_tables_arch.h"
-#endif
+
 #include "xlat_tables_private.h"
 
 /*
+ * Each platform can define the size of its physical and virtual address spaces.
+ * If the platform hasn't defined one or both of them, default to
+ * ADDR_SPACE_SIZE. The latter is deprecated, though.
+ */
+#if ERROR_DEPRECATED
+# ifdef ADDR_SPACE_SIZE
+#  error "ADDR_SPACE_SIZE is deprecated. Use PLAT_xxx_ADDR_SPACE_SIZE instead."
+# endif
+#elif defined(ADDR_SPACE_SIZE)
+# ifndef PLAT_PHY_ADDR_SPACE_SIZE
+#  define PLAT_PHY_ADDR_SPACE_SIZE	ADDR_SPACE_SIZE
+# endif
+# ifndef PLAT_VIRT_ADDR_SPACE_SIZE
+#  define PLAT_VIRT_ADDR_SPACE_SIZE	ADDR_SPACE_SIZE
+# endif
+#endif
+
+CASSERT(CHECK_VIRT_ADDR_SPACE_SIZE(PLAT_VIRT_ADDR_SPACE_SIZE),
+	assert_invalid_virtual_addr_space_size);
+
+CASSERT(CHECK_PHY_ADDR_SPACE_SIZE(PLAT_PHY_ADDR_SPACE_SIZE),
+	assert_invalid_physical_addr_space_size);
+
+#define NUM_BASE_LEVEL_ENTRIES	\
+	GET_NUM_BASE_LEVEL_ENTRIES(PLAT_VIRT_ADDR_SPACE_SIZE)
+
+#define XLAT_TABLE_LEVEL_BASE	\
+	GET_XLAT_TABLE_LEVEL_BASE(PLAT_VIRT_ADDR_SPACE_SIZE)
+
+/*
  * Private variables used by the TF
  */
 static mmap_region_t tf_mmap[MAX_MMAP_REGIONS + 1];
diff --git a/lib/xlat_tables_v2/xlat_tables_internal.c b/lib/xlat_tables_v2/xlat_tables_internal.c
index 91e02d3..a3a98d1 100644
--- a/lib/xlat_tables_v2/xlat_tables_internal.c
+++ b/lib/xlat_tables_v2/xlat_tables_internal.c
@@ -15,12 +15,10 @@
 #include <string.h>
 #include <types.h>
 #include <utils.h>
+#include <xlat_tables_arch.h>
+#include <xlat_tables_defs.h>
 #include <xlat_tables_v2.h>
-#ifdef AARCH32
-# include "aarch32/xlat_tables_arch.h"
-#else
-# include "aarch64/xlat_tables_arch.h"
-#endif
+
 #include "xlat_tables_private.h"
 
 #if PLAT_XLAT_TABLES_DYNAMIC
diff --git a/lib/xlat_tables_v2/xlat_tables_private.h b/lib/xlat_tables_v2/xlat_tables_private.h
index 83e0b6e..83aa5b1 100644
--- a/lib/xlat_tables_v2/xlat_tables_private.h
+++ b/lib/xlat_tables_v2/xlat_tables_private.h
@@ -7,32 +7,8 @@
 #ifndef __XLAT_TABLES_PRIVATE_H__
 #define __XLAT_TABLES_PRIVATE_H__
 
-#include <cassert.h>
 #include <platform_def.h>
-#include <utils_def.h>
-
-/*
- * If the platform hasn't defined a physical and a virtual address space size
- * default to ADDR_SPACE_SIZE.
- */
-#if ERROR_DEPRECATED
-# ifdef ADDR_SPACE_SIZE
-#  error "ADDR_SPACE_SIZE is deprecated. Use PLAT_xxx_ADDR_SPACE_SIZE instead."
-# endif
-#elif defined(ADDR_SPACE_SIZE)
-# ifndef PLAT_PHY_ADDR_SPACE_SIZE
-#  define PLAT_PHY_ADDR_SPACE_SIZE	ADDR_SPACE_SIZE
-# endif
-# ifndef PLAT_VIRT_ADDR_SPACE_SIZE
-#  define PLAT_VIRT_ADDR_SPACE_SIZE	ADDR_SPACE_SIZE
-# endif
-#endif
-
-/* The virtual and physical address space sizes must be powers of two. */
-CASSERT(IS_POWER_OF_TWO(PLAT_VIRT_ADDR_SPACE_SIZE),
-	assert_valid_virt_addr_space_size);
-CASSERT(IS_POWER_OF_TWO(PLAT_PHY_ADDR_SPACE_SIZE),
-	assert_valid_phy_addr_space_size);
+#include <xlat_tables_defs.h>
 
 /* Struct that holds all information about the translation tables. */
 typedef struct {