diff --git a/docs/plat/marvell/armada/uart-booting.rst b/docs/plat/marvell/armada/uart-booting.rst
new file mode 100644
index 0000000..06601d1
--- /dev/null
+++ b/docs/plat/marvell/armada/uart-booting.rst
@@ -0,0 +1,103 @@
+TF-A UART Booting Instructions for Marvell Platforms
+====================================================
+
+This section describes how to temporary boot the Trusted Firmware-A (TF-A) project over UART
+without flashing it to non-volatile storage for Marvell's platforms.
+
+See :ref:`TF-A Build Instructions for Marvell Platforms` how to build ``mrvl_uart`` and
+``mrvl_flash`` targets used in this section.
+
+Armada37x0 UART image downloading
+---------------------------------
+
+There are two options how to download UART image into any Armada37x0 board.
+
+Marvell Wtpdownloader
+~~~~~~~~~~~~~~~~~~~~~
+
+Marvell Wtpdownloader works only with UART images stored in separate files and supports only upload
+speed with 115200 bauds. Target ``mrvl_uart`` produces GZIPed TAR archive ``uart-images.tgz.bin``
+with either three files ``TIM_ATF.bin``, ``wtmi_h.bin`` and ``boot-image_h.bin`` for non-secure
+boot or with four files ``TIM_ATF_TRUSTED.bin``, ``TIMN_ATF_TRUSTED.bin``, ``wtmi_h.bin`` and
+``boot-image_h.bin`` when secure boot is enabled.
+
+Compilation:
+
+.. code:: shell
+
+    > git clone https://github.com/MarvellEmbeddedProcessors/A3700-utils-marvell.git
+    > make -C A3700-utils-marvell/wtptp/src/Wtpdownloader_Linux -f makefile.mk
+
+It produces executable binary ``A3700-utils-marvell/wtptp/src/Wtpdownloader_Linux/WtpDownload_linux``
+
+To download images from ``uart-images.tgz.bin`` archive unpack it and for non-secure boot variant run:
+
+.. code:: shell
+
+    > stty -F /dev/ttyUSB<port#> clocal
+    > WtpDownload_linux -P UART -C <port#> -E -B TIM_ATF.bin -I wtmi_h.bin -I boot-image_h.bin
+
+After that immediately start terminal on ``/dev/ttyUSB<port#>`` to see boot output.
+
+CZ.NIC mox-imager
+~~~~~~~~~~~~~~~~~
+
+CZ.NIC mox-imager supports all Armada37x0 boards (not only Turris MOX as name suggests). It works
+with either with separate files from ``uart-images.tgz.bin`` archive (like Marvell Wtpdownloader)
+produced by ``mrvl_uart`` target or also with ``flash-image.bin`` file produced by ``mrvl_flash``
+target, which is the exactly same file as used for flashing. So when using CZ.NIC mox-imager there
+is no need to build separate files for UART flashing like in case with Marvell Wtpdownloader.
+
+CZ.NIC mox-imager moreover supports higher upload speeds up to the 6000000 bauds (which seems to
+be limit of Armada37x0 SoC) which is much higher and faster than Marvell Wtpdownloader.
+
+Compilation:
+
+.. code:: shell
+
+    > git clone https://gitlab.nic.cz/turris/mox-imager.git
+    > make -C mox-imager
+
+It produces executable binary ``mox-imager/mox-imager``
+
+To download single file image built by ``mrvl_flash`` target at the highest speed, run:
+
+.. code:: shell
+
+    > mox-imager -D /dev/ttyUSB<port#> -E -b 6000000 -t flash-image.bin
+
+To download images from ``uart-images.tgz.bin`` archive built by ``mrvl_uart`` target for
+non-secure boot variant (like Wtpdownloader) but at the highest speed, first unpack
+``uart-images.tgz.bin`` archive and then run:
+
+.. code:: shell
+
+    > mox-imager -D /dev/ttyUSB<port#> -E -b 6000000 -t TIM_ATF.bin wtmi_h.bin boot-image_h.bin
+
+CZ.NIC mox-imager after successful download will start its own mini terminal (option ``-t``) to
+not loose any boot output. It also prints boot output which is sent either by image files or by
+bootrom during transferring of image files. This mini terminal can be quit by CTRL-\\ + C keypress.
+
+
+A7K/8K/CN913x UART image downloading
+------------------------------------
+
+A7K/8K/CN913x uses same image ``flash-image.bin`` for both flashing and booting over UART.
+For downloading image over UART it is possible to use mvebu64boot tool.
+
+Compilation:
+
+.. code:: shell
+
+    > git clone https://github.com/pali/mvebu64boot.git
+    > make -C mvebu64boot
+
+It produces executable binary ``mvebu64boot/mvebu64boot``
+
+To download ``flash-image.bin`` image run:
+
+.. code:: shell
+
+    > mvebu64boot -t -b flash-image.bin /dev/ttyUSB0
+
+After successful download it will start own mini terminal (option ``-t``) like CZ.NIC mox-imager.
diff --git a/docs/plat/marvell/index.rst b/docs/plat/marvell/index.rst
index 0d33432..2d5cdeb 100644
--- a/docs/plat/marvell/index.rst
+++ b/docs/plat/marvell/index.rst
@@ -6,6 +6,7 @@
    :caption: Contents
 
    armada/build
+   armada/uart-booting
    armada/porting
    armada/misc/mvebu-a8k-addr-map
    armada/misc/mvebu-amb