diff --git a/plat/common/plat_gicv2.c b/plat/common/plat_gicv2.c
new file mode 100644
index 0000000..65f89dc
--- /dev/null
+++ b/plat/common/plat_gicv2.c
@@ -0,0 +1,148 @@
+/*
+ * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <assert.h>
+#include <gic_common.h>
+#include <gicv2.h>
+#include <interrupt_mgmt.h>
+
+/*
+ * The following platform GIC functions are weakly defined. They
+ * provide typical implementations that may be re-used by multiple
+ * platforms but may also be overridden by a platform if required.
+ */
+#pragma weak plat_ic_get_pending_interrupt_id
+#pragma weak plat_ic_get_pending_interrupt_type
+#pragma weak plat_ic_acknowledge_interrupt
+#pragma weak plat_ic_get_interrupt_type
+#pragma weak plat_ic_end_of_interrupt
+#pragma weak plat_interrupt_type_to_line
+
+/*
+ * This function returns the highest priority pending interrupt at
+ * the Interrupt controller
+ */
+uint32_t plat_ic_get_pending_interrupt_id(void)
+{
+	unsigned int id;
+
+	id = gicv2_get_pending_interrupt_id();
+	if (id == GIC_SPURIOUS_INTERRUPT)
+		return INTR_ID_UNAVAILABLE;
+
+	return id;
+}
+
+/*
+ * This function returns the type of the highest priority pending interrupt
+ * at the Interrupt controller. In the case of GICv2, the Highest Priority
+ * Pending interrupt register (`GICC_HPPIR`) is read to determine the id of
+ * the pending interrupt. The type of interrupt depends upon the id value
+ * as follows.
+ *   1. id < PENDING_G1_INTID (1022) is reported as a S-EL1 interrupt
+ *   2. id = PENDING_G1_INTID (1022) is reported as a Non-secure interrupt.
+ *   3. id = GIC_SPURIOUS_INTERRUPT (1023) is reported as an invalid interrupt
+ *           type.
+ */
+uint32_t plat_ic_get_pending_interrupt_type(void)
+{
+	unsigned int id;
+
+	id = gicv2_get_pending_interrupt_type();
+
+	/* Assume that all secure interrupts are S-EL1 interrupts */
+	if (id < PENDING_G1_INTID)
+		return INTR_TYPE_S_EL1;
+
+	if (id == GIC_SPURIOUS_INTERRUPT)
+		return INTR_TYPE_INVAL;
+
+	return INTR_TYPE_NS;
+}
+
+/*
+ * This function returns the highest priority pending interrupt at
+ * the Interrupt controller and indicates to the Interrupt controller
+ * that the interrupt processing has started.
+ */
+uint32_t plat_ic_acknowledge_interrupt(void)
+{
+	return gicv2_acknowledge_interrupt();
+}
+
+/*
+ * This function returns the type of the interrupt `id`, depending on how
+ * the interrupt has been configured in the interrupt controller
+ */
+uint32_t plat_ic_get_interrupt_type(uint32_t id)
+{
+	unsigned int type;
+
+	type = gicv2_get_interrupt_group(id);
+
+	/* Assume that all secure interrupts are S-EL1 interrupts */
+	return (type) ? INTR_TYPE_NS : INTR_TYPE_S_EL1;
+}
+
+/*
+ * This functions is used to indicate to the interrupt controller that
+ * the processing of the interrupt corresponding to the `id` has
+ * finished.
+ */
+void plat_ic_end_of_interrupt(uint32_t id)
+{
+	gicv2_end_of_interrupt(id);
+}
+
+/*
+ * An ARM processor signals interrupt exceptions through the IRQ and FIQ pins.
+ * The interrupt controller knows which pin/line it uses to signal a type of
+ * interrupt. It lets the interrupt management framework determine
+ * for a type of interrupt and security state, which line should be used in the
+ * SCR_EL3 to control its routing to EL3. The interrupt line is represented
+ * as the bit position of the IRQ or FIQ bit in the SCR_EL3.
+ */
+uint32_t plat_interrupt_type_to_line(uint32_t type,
+				uint32_t security_state)
+{
+	assert(type == INTR_TYPE_S_EL1 ||
+		       type == INTR_TYPE_EL3 ||
+		       type == INTR_TYPE_NS);
+
+	/* Non-secure interrupts are signaled on the IRQ line always */
+	if (type == INTR_TYPE_NS)
+		return __builtin_ctz(SCR_IRQ_BIT);
+
+	/*
+	 * Secure interrupts are signaled using the IRQ line if the FIQ is
+	 * not enabled else they are signaled using the FIQ line.
+	 */
+	return ((gicv2_is_fiq_enabled()) ? __builtin_ctz(SCR_FIQ_BIT) :
+						__builtin_ctz(SCR_IRQ_BIT));
+}