feat(ls1088a): add new SoC platform ls1088a
LS1088A is a cost-effective, powerefficient, and highly integrated
SoC device featuring eight extremely power-efficient 64-bit ARM
Cortex-A53 cores with ECC-protected L1 and L2 cache memories for
high reliability, running up to 1.6 GHz.
This patch is to add ls1088a SoC support in TF-A.
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Id9ebcdad1beab07ea81a41955edd4f471d6cf090
diff --git a/plat/nxp/soc-ls1088a/soc.c b/plat/nxp/soc-ls1088a/soc.c
new file mode 100644
index 0000000..5f9f313
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/soc.c
@@ -0,0 +1,397 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <arch.h>
+#include <caam.h>
+#include <cci.h>
+#include <common/debug.h>
+#include <dcfg.h>
+#ifdef I2C_INIT
+#include <i2c.h>
+#endif
+#include <lib/mmio.h>
+#include <lib/xlat_tables/xlat_tables_v2.h>
+#include <ls_interconnect.h>
+#if TRUSTED_BOARD_BOOT
+#include <nxp_smmu.h>
+#endif
+#include <nxp_timer.h>
+#include <plat_console.h>
+#include <plat_gic.h>
+#include <plat_tzc400.h>
+#include <pmu.h>
+#if defined(NXP_SFP_ENABLED)
+#include <sfp.h>
+#endif
+
+#include <errata.h>
+#ifdef CONFIG_OCRAM_ECC_EN
+#include <ocram.h>
+#endif
+#include <plat_common.h>
+#include <platform_def.h>
+#include <soc.h>
+
+static unsigned char _power_domain_tree_desc[NUMBER_OF_CLUSTERS + 2];
+static struct soc_type soc_list[] = {
+ SOC_ENTRY(LS1044A, LS1044A, 1, 4),
+ SOC_ENTRY(LS1044AE, LS1044AE, 1, 4),
+ SOC_ENTRY(LS1048A, LS1048A, 1, 4),
+ SOC_ENTRY(LS1048AE, LS1048AE, 1, 4),
+ SOC_ENTRY(LS1084A, LS1084A, 2, 4),
+ SOC_ENTRY(LS1084AE, LS1084AE, 2, 4),
+ SOC_ENTRY(LS1088A, LS1088A, 2, 4),
+ SOC_ENTRY(LS1088AE, LS1088AE, 2, 4),
+};
+
+static dcfg_init_info_t dcfg_init_data = {
+ .g_nxp_dcfg_addr = NXP_DCFG_ADDR,
+ .nxp_sysclk_freq = NXP_SYSCLK_FREQ,
+ .nxp_ddrclk_freq = NXP_DDRCLK_FREQ,
+ .nxp_plat_clk_divider = NXP_PLATFORM_CLK_DIVIDER,
+};
+
+/*
+ * This function dynamically constructs the topology according to
+ * SoC Flavor and returns it.
+ */
+const unsigned char *plat_get_power_domain_tree_desc(void)
+{
+ unsigned int i;
+ uint8_t num_clusters, cores_per_cluster;
+
+ get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+
+ /*
+ * The highest level is the system level. The next level is constituted
+ * by clusters and then cores in clusters.
+ */
+ _power_domain_tree_desc[0] = 1;
+ _power_domain_tree_desc[1] = num_clusters;
+
+ for (i = 0; i < _power_domain_tree_desc[1]; i++) {
+ _power_domain_tree_desc[i + 2] = cores_per_cluster;
+ }
+
+
+ return _power_domain_tree_desc;
+}
+
+CASSERT(NUMBER_OF_CLUSTERS && NUMBER_OF_CLUSTERS <= 256,
+ assert_invalid_ls1088a_cluster_count);
+
+/*
+ * This function returns the core count within the cluster corresponding to
+ * `mpidr`.
+ */
+unsigned int plat_ls_get_cluster_core_count(u_register_t mpidr)
+{
+ return CORES_PER_CLUSTER;
+}
+
+/*
+ * This function returns the total number of cores in the SoC
+ */
+unsigned int get_tot_num_cores(void)
+{
+ uint8_t num_clusters, cores_per_cluster;
+
+ get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+
+ return (num_clusters * cores_per_cluster);
+}
+
+/*
+ * This function returns the PMU IDLE Cluster mask.
+ */
+unsigned int get_pmu_idle_cluster_mask(void)
+{
+ uint8_t num_clusters, cores_per_cluster;
+
+ get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+
+ return ((1 << num_clusters) - 2);
+}
+
+/*
+ * This function returns the PMU Flush Cluster mask.
+ */
+unsigned int get_pmu_flush_cluster_mask(void)
+{
+ uint8_t num_clusters, cores_per_cluster;
+
+ get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+
+ return ((1 << num_clusters) - 2);
+}
+
+/*
+ * This function returns the PMU IDLE Core mask.
+ */
+unsigned int get_pmu_idle_core_mask(void)
+{
+ return ((1 << get_tot_num_cores()) - 2);
+}
+
+#ifdef IMAGE_BL2
+
+void soc_bl2_prepare_exit(void)
+{
+#if defined(NXP_SFP_ENABLED) && defined(DISABLE_FUSE_WRITE)
+ set_sfp_wr_disable();
+#endif
+}
+
+void soc_preload_setup(void)
+{
+
+}
+
+/*
+ * This function returns the boot device based on RCW_SRC
+ */
+enum boot_device get_boot_dev(void)
+{
+ enum boot_device src = BOOT_DEVICE_NONE;
+ uint32_t porsr1;
+ uint32_t rcw_src, val;
+
+ porsr1 = read_reg_porsr1();
+
+ rcw_src = (porsr1 & PORSR1_RCW_MASK) >> PORSR1_RCW_SHIFT;
+
+ /* RCW SRC NOR */
+ val = rcw_src & RCW_SRC_TYPE_MASK;
+ if (val == NOR_16B_VAL) {
+ src = BOOT_DEVICE_IFC_NOR;
+ INFO("RCW BOOT SRC is IFC NOR\n");
+ } else {
+ val = rcw_src & RCW_SRC_SERIAL_MASK;
+ switch (val) {
+ case QSPI_VAL:
+ src = BOOT_DEVICE_QSPI;
+ INFO("RCW BOOT SRC is QSPI\n");
+ break;
+ case SDHC_VAL:
+ src = BOOT_DEVICE_EMMC;
+ INFO("RCW BOOT SRC is SD/EMMC\n");
+ break;
+ case EMMC_VAL:
+ src = BOOT_DEVICE_EMMC;
+ INFO("RCW BOOT SRC is SD/EMMC\n");
+ break;
+ default:
+ src = BOOT_DEVICE_NONE;
+ }
+ }
+
+ return src;
+}
+
+/*
+ * This function sets up access permissions on memory regions
+ */
+void soc_mem_access(void)
+{
+ dram_regions_info_t *info_dram_regions = get_dram_regions_info();
+ int i = 0;
+ struct tzc400_reg tzc400_reg_list[MAX_NUM_TZC_REGION];
+ int dram_idx, index = 1;
+
+ for (dram_idx = 0; dram_idx < info_dram_regions->num_dram_regions;
+ dram_idx++) {
+ if (info_dram_regions->region[i].size == 0) {
+ ERROR("DDR init failure, or");
+ ERROR("DRAM regions not populated correctly.\n");
+ break;
+ }
+
+ index = populate_tzc400_reg_list(tzc400_reg_list,
+ dram_idx, index,
+ info_dram_regions->region[dram_idx].addr,
+ info_dram_regions->region[dram_idx].size,
+ NXP_SECURE_DRAM_SIZE, NXP_SP_SHRD_DRAM_SIZE);
+ }
+
+ mem_access_setup(NXP_TZC_ADDR, index,
+ tzc400_reg_list);
+}
+
+/*
+ * This function implements soc specific erratum
+ * This is called before DDR is initialized or MMU is enabled
+ */
+void soc_early_init(void)
+{
+ enum boot_device dev;
+ dram_regions_info_t *dram_regions_info = get_dram_regions_info();
+
+#ifdef CONFIG_OCRAM_ECC_EN
+ ocram_init(NXP_OCRAM_ADDR, NXP_OCRAM_SIZE);
+#endif
+ dcfg_init(&dcfg_init_data);
+#if LOG_LEVEL > 0
+ /* Initialize the console to provide early debug support */
+ plat_console_init(NXP_CONSOLE_ADDR,
+ NXP_UART_CLK_DIVIDER, NXP_CONSOLE_BAUDRATE);
+#endif
+ enable_timer_base_to_cluster(NXP_PMU_ADDR);
+ enable_core_tb(NXP_PMU_ADDR);
+
+ /*
+ * Use the region(NXP_SD_BLOCK_BUF_ADDR + NXP_SD_BLOCK_BUF_SIZE)
+ * as dma of sd
+ */
+ dev = get_boot_dev();
+ if (dev == BOOT_DEVICE_EMMC) {
+ mmap_add_region(NXP_SD_BLOCK_BUF_ADDR, NXP_SD_BLOCK_BUF_ADDR,
+ NXP_SD_BLOCK_BUF_SIZE,
+ MT_DEVICE | MT_RW | MT_NS);
+ }
+
+#if TRUSTED_BOARD_BOOT
+ uint32_t mode;
+
+ sfp_init(NXP_SFP_ADDR);
+ /*
+ * For secure boot disable SMMU.
+ * Later when platform security policy comes in picture,
+ * this might get modified based on the policy
+ */
+ if (check_boot_mode_secure(&mode) == true) {
+ bypass_smmu(NXP_SMMU_ADDR);
+ }
+
+ /*
+ * For Mbedtls currently crypto is not supported via CAAM
+ * enable it when that support is there. In tbbr.mk
+ * the CAAM_INTEG is set as 0.
+ */
+#ifndef MBEDTLS_X509
+ /* Initialize the crypto accelerator if enabled */
+ if (is_sec_enabled() == false) {
+ INFO("SEC is disabled.\n");
+ } else {
+ sec_init(NXP_CAAM_ADDR);
+ }
+#endif
+#endif
+
+ soc_errata();
+
+ delay_timer_init(NXP_TIMER_ADDR);
+ i2c_init(NXP_I2C_ADDR);
+ dram_regions_info->total_dram_size = init_ddr();
+}
+#else /* !IMAGE_BL2 */
+
+void soc_early_platform_setup2(void)
+{
+ dcfg_init(&dcfg_init_data);
+ /*
+ * Initialize system level generic timer for Socs
+ */
+ delay_timer_init(NXP_TIMER_ADDR);
+
+#if LOG_LEVEL > 0
+ /* Initialize the console to provide early debug support */
+ plat_console_init(NXP_CONSOLE_ADDR,
+ NXP_UART_CLK_DIVIDER, NXP_CONSOLE_BAUDRATE);
+#endif
+}
+
+void soc_platform_setup(void)
+{
+ /* Initialize the GIC driver, cpu and distributor interfaces */
+ static uintptr_t target_mask_array[PLATFORM_CORE_COUNT];
+ static interrupt_prop_t ls_interrupt_props[] = {
+ PLAT_LS_G1S_IRQ_PROPS(INTR_GROUP1S),
+ PLAT_LS_G0_IRQ_PROPS(INTR_GROUP0)
+ };
+
+ plat_ls_gic_driver_init(NXP_GICD_ADDR, NXP_GICR_ADDR,
+ PLATFORM_CORE_COUNT,
+ ls_interrupt_props,
+ ARRAY_SIZE(ls_interrupt_props),
+ target_mask_array,
+ plat_core_pos);
+
+ plat_ls_gic_init();
+ enable_init_timer();
+}
+
+/*
+ * This function initializes the soc from the BL31 module
+ */
+void soc_init(void)
+{
+ uint8_t num_clusters, cores_per_cluster;
+
+ /* low-level init of the soc */
+ soc_init_lowlevel();
+ _init_global_data();
+ soc_init_percpu();
+ _initialize_psci();
+
+ /*
+ * Initialize Interconnect for this cluster during cold boot.
+ * No need for locks as no other CPU is active.
+ */
+ cci_init(NXP_CCI_ADDR, cci_map, ARRAY_SIZE(cci_map));
+
+ /*
+ * Enable Interconnect coherency for the primary CPU's cluster.
+ */
+ get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+ plat_ls_interconnect_enter_coherency(num_clusters);
+
+ /* set platform security policies */
+ _set_platform_security();
+
+ /* Initialize the crypto accelerator if enabled */
+ if (is_sec_enabled() == false) {
+ INFO("SEC is disabled.\n");
+ } else {
+ sec_init(NXP_CAAM_ADDR);
+ }
+}
+
+void soc_runtime_setup(void)
+{
+
+}
+#endif /* IMAGE_BL2 */
+
+/*
+ * Function to return the SoC SYS CLK
+ */
+unsigned int get_sys_clk(void)
+{
+ return NXP_SYSCLK_FREQ;
+}
+
+/*
+ * Function returns the base counter frequency
+ * after reading the first entry at CNTFID0 (0x20 offset).
+ *
+ * Function is used by:
+ * 1. ARM common code for PSCI management.
+ * 2. ARM Generic Timer init.
+ */
+unsigned int plat_get_syscnt_freq2(void)
+{
+ unsigned int counter_base_frequency;
+ /*
+ * Below register specifies the base frequency of the system counter.
+ * As per NXP Board Manuals:
+ * The system counter always works with SYS_REF_CLK/4 frequency clock.
+ */
+ counter_base_frequency = mmio_read_32(NXP_TIMER_ADDR + CNTFID_OFF);
+
+ return counter_base_frequency;
+}