| #!/usr/bin/env bash |
| # |
| # Copyright (c) 2019-2020, Arm Limited. All rights reserved. |
| # |
| # SPDX-License-Identifier: BSD-3-Clause |
| # |
| |
| set -u |
| |
| bl1_addr="${bl1_addr:-0x0}" |
| bl31_addr="${bl31_addr:-0x04001000}" |
| bl32_addr="${bl32_addr:-0x04003000}" |
| bl33_addr="${bl33_addr:-0x88000000}" |
| dtb_addr="${dtb_addr:-0x82000000}" |
| fip_addr="${fip_addr:-0x08000000}" |
| initrd_addr="${initrd_addr:-0x84000000}" |
| kernel_addr="${kernel_addr:-0x80080000}" |
| el3_payload_addr="${el3_payload_addr:-0x80000000}" |
| |
| # SPM requires following addresses for RESET_TO_BL31 case |
| spm_addr="${spm_addr:-0x6000000}" |
| spmc_manifest_addr="${spmc_addr:-0x0403f000}" |
| sp1_addr="${sp1_addr:-0x7000000}" |
| sp2_addr="${sp2_addr:-0x7100000}" |
| sp3_addr="${sp3_addr:-0x7200000}" |
| |
| ns_bl1u_addr="${ns_bl1u_addr:-0x0beb8000}" |
| fwu_fip_addr="${fwu_fip_addr:-0x08400000}" |
| backup_fip_addr="${backup_fip_addr:-0x09000000}" |
| romlib_addr="${romlib_addr:-0x03ff2000}" |
| |
| uboot32_fip_url="$linaro_release/fvp32-latest-busybox-uboot/fip.bin" |
| |
| rootfs_url="$linaro_release/lt-vexpress64-openembedded_minimal-armv8-gcc-4.9_20150912-729.img.gz" |
| |
| # FVP Kernel URLs |
| declare -A fvp_kernels |
| fvp_kernels=( |
| [fvp-aarch32-zimage]="$linaro_release/fvp32-latest-busybox-uboot/Image" |
| [fvp-busybox-uboot]="$linaro_release/fvp-latest-busybox-uboot/Image" |
| [fvp-oe-uboot32]="$linaro_release/fvp32-latest-oe-uboot/Image" |
| [fvp-oe-uboot]="$linaro_release/fvp-latest-oe-uboot/Image" |
| [fvp-quad-busybox-uboot]="$tfa_downloads/quad_cluster/Image" |
| ) |
| |
| # FVP initrd URLs |
| declare -A fvp_initrd_urls |
| fvp_initrd_urls=( |
| [aarch32-ramdisk]="$linaro_release/fvp32-latest-busybox-uboot/ramdisk.img" |
| [dummy-ramdisk]="$linaro_release/fvp-latest-oe-uboot/ramdisk.img" |
| [dummy-ramdisk32]="$linaro_release/fvp32-latest-oe-uboot/ramdisk.img" |
| [default]="$linaro_release/fvp-latest-busybox-uboot/ramdisk.img" |
| ) |
| |
| get_optee_bin() { |
| url="$jenkins_url/job/tf-optee-build/PLATFORM_FLAVOR=fvp,label=arch-dev/lastSuccessfulBuild/artifact/artefacts/tee.bin" \ |
| saveas="bl32.bin" fetch_file |
| archive_file "bl32.bin" |
| } |
| |
| # For Measured Boot tests using a TA based on OPTEE, it is necessary to use a |
| # specific build rather than the default one generated by Jenkins. |
| get_ftpm_optee_bin() { |
| url="${nfs_volume}/pdsw/downloads/tf-a/ftpm/optee/tee-header_v2.bin" \ |
| saveas="bl32.bin" fetch_file |
| archive_file "bl32.bin" |
| |
| url="${nfs_volume}/pdsw/downloads/tf-a/ftpm/optee/tee-pager_v2.bin" \ |
| saveas="bl32_extra1.bin" fetch_file |
| archive_file "bl32_extra1.bin" |
| |
| url="${nfs_volume}/pdsw/downloads/tf-a/ftpm/optee/tee-pageable_v2.bin" \ |
| saveas="bl32_extra2.bin" fetch_file |
| archive_file "bl32_extra2.bin" |
| } |
| |
| get_uboot32_bin() { |
| local tmpdir="$(mktempdir)" |
| |
| pushd "$tmpdir" |
| extract_fip "$uboot32_fip_url" |
| mv "nt-fw.bin" "uboot.bin" |
| archive_file "uboot.bin" |
| popd |
| } |
| |
| get_uboot_bin() { |
| local uboot_url="$linaro_release/fvp-latest-busybox-uboot/bl33-uboot.bin" |
| |
| url="$uboot_url" saveas="uboot.bin" fetch_file |
| archive_file "uboot.bin" |
| } |
| |
| get_uefi_bin() { |
| uefi_downloads="${uefi_downloads:-http://files.oss.arm.com/downloads/uefi}" |
| uefi_ci_bin_url="${uefi_ci_bin_url:-$uefi_downloads/Artifacts/Linux/github/fvp/static/DEBUG_GCC5/FVP_AARCH64_EFI.fd}" |
| |
| url=$uefi_ci_bin_url saveas="uefi.bin" fetch_file |
| archive_file "uefi.bin" |
| } |
| |
| get_kernel() { |
| local kernel_type="${kernel_type:?}" |
| local url="${fvp_kernels[$kernel_type]}" |
| |
| url="${url:?}" saveas="kernel.bin" fetch_file |
| archive_file "kernel.bin" |
| } |
| |
| get_initrd() { |
| local initrd_type="${initrd_type:?}" |
| local url="${fvp_initrd_urls[$initrd_type]}" |
| |
| url="${url:?}" saveas="initrd.bin" fetch_file |
| archive_file "initrd.bin" |
| } |
| |
| get_dtb() { |
| local dtb_type="${dtb_type:?}" |
| local dtb_url |
| local dtb_saveas="$workspace/dtb.bin" |
| local cc="$(get_tf_opt CROSS_COMPILE)" |
| local pp_flags="-P -nostdinc -undef -x assembler-with-cpp" |
| |
| case "$dtb_type" in |
| "fvp-base-quad-cluster-gicv3-psci") |
| # Get the quad-cluster FDT from pdsw area |
| dtb_url="$tfa_downloads/quad_cluster/fvp-base-quad-cluster-gicv3-psci.dtb" |
| url="$dtb_url" saveas="$dtb_saveas" fetch_file |
| ;; |
| "sgm775") |
| # Get the SGM775 FDT from pdsw area |
| dtb_url="$sgm_prebuilts/sgm775.dtb" |
| url="$dtb_url" saveas="$dtb_saveas" fetch_file |
| ;; |
| *) |
| # Preprocess DTS file |
| ${cc}gcc -E ${pp_flags} -I"$tf_root/fdts" -I"$tf_root/include" \ |
| -o "$workspace/${dtb_type}.pre.dts" \ |
| "$tf_root/fdts/${dtb_type}.dts" |
| # Generate DTB file from DTS |
| dtc -I dts -O dtb \ |
| "$workspace/${dtb_type}.pre.dts" -o "$dtb_saveas" |
| esac |
| |
| archive_file "$dtb_saveas" |
| } |
| |
| get_rootfs() { |
| local tmpdir |
| local fs_base="$(echo $(basename $rootfs_url) | sed 's/\.gz$//')" |
| local cached="$project_filer/ci-files/$fs_base" |
| |
| if upon "$jenkins_run" && [ -f "$cached" ]; then |
| # Job workspace is limited in size, and the root file system is |
| # quite large. This means, parallel runs of root file system |
| # tests could fail. So, for Jenkins runs, copy and use the root |
| # file system image from the $CI_SCRATCH location |
| local private="$CI_SCRATCH/$JOB_NAME-$BUILD_NUMBER" |
| mkdir -p "$private" |
| rm -f "$private/rootfs.bin" |
| url="$cached" saveas="$private/rootfs.bin" fetch_file |
| ln -s "$private/rootfs.bin" "$archive/rootfs.bin" |
| return |
| fi |
| |
| tmpdir="$(mktempdir)" |
| pushd "$tmpdir" |
| url="$rootfs_url" saveas="rootfs.bin" fetch_file |
| |
| # Possibly, the filesystem image we just downloaded is compressed. |
| # Decompress it if required. |
| if file "rootfs.bin" | grep -iq 'gzip compressed data'; then |
| echo "Decompressing root file system image rootfs.bin ..." |
| gunzip --stdout "rootfs.bin" > uncompressed_fs.bin |
| mv uncompressed_fs.bin "rootfs.bin" |
| fi |
| |
| archive_file "rootfs.bin" |
| popd |
| } |
| |
| fvp_romlib_jmptbl_backup="$(mktempdir)/jmptbl.i" |
| |
| fvp_romlib_runtime() { |
| local tmpdir="$(mktempdir)" |
| |
| # Save BL1 and romlib binaries from original build |
| mv "${tf_build_root:?}/${plat:?}/${mode:?}/romlib/romlib.bin" "$tmpdir/romlib.bin" |
| mv "${tf_build_root:?}/${plat:?}/${mode:?}/bl1.bin" "$tmpdir/bl1.bin" |
| |
| # Patch index file |
| cp "${tf_root:?}/plat/arm/board/fvp/jmptbl.i" "$fvp_romlib_jmptbl_backup" |
| sed -i '/fdt/ s/.$/&\ patch/' ${tf_root:?}/plat/arm/board/fvp/jmptbl.i |
| |
| # Rebuild with patched file |
| echo "Building patched romlib:" |
| build_tf |
| |
| # Retrieve original BL1 and romlib binaries |
| mv "$tmpdir/romlib.bin" "${tf_build_root:?}/${plat:?}/${mode:?}/romlib/romlib.bin" |
| mv "$tmpdir/bl1.bin" "${tf_build_root:?}/${plat:?}/${mode:?}/bl1.bin" |
| } |
| |
| fvp_romlib_cleanup() { |
| # Restore original index |
| mv "$fvp_romlib_jmptbl_backup" "${tf_root:?}/plat/arm/board/fvp/jmptbl.i" |
| } |
| |
| |
| fvp_gen_bin_url() { |
| local bin_mode="${bin_mode:?}" |
| local bin="${1:?}" |
| |
| if upon "$jenkins_run"; then |
| echo "$jenkins_url/job/$JOB_NAME/$BUILD_NUMBER/artifact/artefacts/$bin_mode/$bin" |
| else |
| echo "file://$workspace/artefacts/$bin_mode/$bin" |
| fi |
| } |
| |
| gen_fvp_yaml_template() { |
| local yaml_template_file="$workspace/fvp_template.yaml" |
| |
| # must parameters for yaml generation |
| local payload_type="${payload_type:?}" |
| |
| "$ci_root/script/gen_fvp_${payload_type}_yaml.sh" > "$yaml_template_file" |
| |
| archive_file "$yaml_template_file" |
| } |
| |
| gen_fvp_yaml() { |
| local yaml_template_file="$workspace/fvp_template.yaml" |
| local yaml_file="$workspace/fvp.yaml" |
| |
| # must parameters for yaml generation |
| local model="${model:?}" |
| local dtb="${dtb:?}" |
| local container_name="${container_name:?}" |
| local container_model_params="${container_model_params:?}" |
| local container_entrypoint="${container_entrypoint:?}" |
| local archive="${archive:?}" |
| |
| # general artefacts |
| bl1="$(fvp_gen_bin_url bl1.bin)" |
| fip="$(fvp_gen_bin_url fip.bin)" |
| |
| # linux artefacts |
| dtb="$(fvp_gen_bin_url $dtb)" |
| image="$(fvp_gen_bin_url kernel.bin)" |
| ramdisk="$(fvp_gen_bin_url initrd.bin)" |
| |
| # tftf's ns_bl[1|2]u.bin artefacts |
| ns_bl1u="$(fvp_gen_bin_url ns_bl1u.bin)" |
| ns_bl2u="$(fvp_gen_bin_url ns_bl2u.bin)" |
| |
| docker_registry="${docker_registry:-}" |
| docker_registry="$(docker_registry_append)" |
| |
| docker_name="${docker_registry}$container_name" |
| |
| version_string="\"ARM ${model}"' [^\\n]+'"\"" |
| |
| sed -e "s|\${ACTIONS_DEPLOY_IMAGES_BL1}|${bl1}|" \ |
| -e "s|\${ACTIONS_DEPLOY_IMAGES_FIP}|${fip}|" \ |
| -e "s|\${ACTIONS_DEPLOY_IMAGES_DTB}|${dtb}|" \ |
| -e "s|\${ACTIONS_DEPLOY_IMAGES_IMAGE}|${image}|" \ |
| -e "s|\${ACTIONS_DEPLOY_IMAGES_RAMDISK}|${ramdisk}|" \ |
| -e "s|\${ACTIONS_DEPLOY_IMAGES_NS_BL1U}|${ns_bl1u}|" \ |
| -e "s|\${ACTIONS_DEPLOY_IMAGES_NS_BL2U}|${ns_bl2u}|" \ |
| -e "s|\${BOOT_DOCKER_NAME}|${docker_name}|" \ |
| -e "s|\${BOOT_IMAGE}|${container_entrypoint}|" \ |
| -e "s|\${BOOT_VERSION_STRING}|${version_string}|" \ |
| < "$yaml_template_file" \ |
| > "$yaml_file" |
| |
| # include the model parameters |
| while read -r line; do |
| if [ -n "$line" ]; then |
| yaml_line="- \"${line}\"" |
| sed -i -e "/\${BOOT_ARGUMENTS}/i \ \ \ \ $yaml_line" "$yaml_file" |
| fi |
| done < "$archive/model_params" |
| sed -i -e '/\${BOOT_ARGUMENTS}/d' "$yaml_file" |
| |
| archive_file "$yaml_file" |
| } |
| |
| docker_registry_append() { |
| # if docker_registry is empty, just use local docker registry |
| [ -z "$docker_registry" ] && return |
| |
| local last=-1 |
| local last_char="${docker_registry:last}" |
| |
| if [ "$last_char" != '/' ]; then |
| docker_registry="${docker_registry}/"; |
| fi |
| echo "$docker_registry" |
| } |
| |
| set +u |