include/mbedtls/nist_kw.h

/**
 * \file nist_kw.h
 *
 * \brief This file provides an API for key wrapping (KW) and key wrapping with
 *        padding (KWP) as defined in NIST SP 800-38F.
 *        https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-38F.pdf
 *
 *        Key wrapping specifies a deterministic authenticated-encryption mode
 *        of operation, according to <em>NIST SP 800-38F: Recommendation for
 *        Block Cipher Modes of Operation: Methods for Key Wrapping</em>. Its
 *        purpose is to protect cryptographic keys.
 *
 *        Its equivalent is RFC 3394 for KW, and RFC 5649 for KWP.
 *        https://tools.ietf.org/html/rfc3394
 *        https://tools.ietf.org/html/rfc5649
 *
 */
/*
 *  Copyright The Mbed TLS Contributors
 *  SPDX-License-Identifier: Apache-2.0
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may
 *  not use this file except in compliance with the License.
 *  You may obtain a copy of the License at
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 */

#ifndef MBEDTLS_NIST_KW_H
#define MBEDTLS_NIST_KW_H
#include "mbedtls/private_access.h"

#include "mbedtls/build_info.h"

#include "mbedtls/cipher.h"

#ifdef __cplusplus
extern "C" {
#endif

typedef enum {
    MBEDTLS_KW_MODE_KW = 0,
    MBEDTLS_KW_MODE_KWP = 1
} mbedtls_nist_kw_mode_t;

#if !defined(MBEDTLS_NIST_KW_ALT)
// Regular implementation
//

/**
 * \brief    The key wrapping context-type definition. The key wrapping context is passed
 *           to the APIs called.
 *
 * \note     The definition of this type may change in future library versions.
 *           Don't make any assumptions on this context!
 */
typedef struct {
    mbedtls_cipher_context_t MBEDTLS_PRIVATE(cipher_ctx);    /*!< The cipher context used. */
} mbedtls_nist_kw_context;

#else  /* MBEDTLS_NIST_key wrapping_ALT */
#include "nist_kw_alt.h"
#endif /* MBEDTLS_NIST_KW_ALT */

/**
 * \brief           This function initializes the specified key wrapping context
 *                  to make references valid and prepare the context
 *                  for mbedtls_nist_kw_setkey() or mbedtls_nist_kw_free().
 *
 * \param ctx       The key wrapping context to initialize.
 *
 */
void mbedtls_nist_kw_init(mbedtls_nist_kw_context *ctx);

/**
 * \brief           This function initializes the key wrapping context set in the
 *                  \p ctx parameter and sets the encryption key.
 *
 * \param ctx       The key wrapping context.
 * \param cipher    The 128-bit block cipher to use. Only AES is supported.
 * \param key       The Key Encryption Key (KEK).
 * \param keybits   The KEK size in bits. This must be acceptable by the cipher.
 * \param is_wrap   Specify whether the operation within the context is wrapping or unwrapping
 *
 * \return          \c 0 on success.
 * \return          \c MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA for any invalid input.
 * \return          \c MBEDTLS_ERR_CIPHER_FEATURE_UNAVAILABLE for 128-bit block ciphers
 *                  which are not supported.
 * \return          cipher-specific error code on failure of the underlying cipher.
 */
int mbedtls_nist_kw_setkey(mbedtls_nist_kw_context *ctx,
                           mbedtls_cipher_id_t cipher,
                           const unsigned char *key,
                           unsigned int keybits,
                           const int is_wrap);

/**
 * \brief   This function releases and clears the specified key wrapping context
 *          and underlying cipher sub-context.
 *
 * \param ctx       The key wrapping context to clear.
 */
void mbedtls_nist_kw_free(mbedtls_nist_kw_context *ctx);

/**
 * \brief           This function encrypts a buffer using key wrapping.
 *
 * \param ctx       The key wrapping context to use for encryption.
 * \param mode      The key wrapping mode to use (MBEDTLS_KW_MODE_KW or MBEDTLS_KW_MODE_KWP)
 * \param input     The buffer holding the input data.
 * \param in_len    The length of the input data in Bytes.
 *                  The input uses units of 8 Bytes called semiblocks.
 *                  <ul><li>For KW mode: a multiple of 8 bytes between 16 and 2^57-8 inclusive. </li>
 *                  <li>For KWP mode: any length between 1 and 2^32-1 inclusive.</li></ul>
 * \param[out] output    The buffer holding the output data.
 *                  <ul><li>For KW mode: Must be at least 8 bytes larger than \p in_len.</li>
 *                  <li>For KWP mode: Must be at least 8 bytes larger rounded up to a multiple of
 *                  8 bytes for KWP (15 bytes at most).</li></ul>
 * \param[out] out_len The number of bytes written to the output buffer. \c 0 on failure.
 * \param[in] out_size The capacity of the output buffer.
 *
 * \return          \c 0 on success.
 * \return          \c MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA for invalid input length.
 * \return          cipher-specific error code on failure of the underlying cipher.
 */
int mbedtls_nist_kw_wrap(mbedtls_nist_kw_context *ctx, mbedtls_nist_kw_mode_t mode,
                         const unsigned char *input, size_t in_len,
                         unsigned char *output, size_t *out_len, size_t out_size);

/**
 * \brief           This function decrypts a buffer using key wrapping.
 *
 * \param ctx       The key wrapping context to use for decryption.
 * \param mode      The key wrapping mode to use (MBEDTLS_KW_MODE_KW or MBEDTLS_KW_MODE_KWP)
 * \param input     The buffer holding the input data.
 * \param in_len    The length of the input data in Bytes.
 *                  The input uses units of 8 Bytes called semiblocks.
 *                  The input must be a multiple of semiblocks.
 *                  <ul><li>For KW mode: a multiple of 8 bytes between 24 and 2^57 inclusive. </li>
 *                  <li>For KWP mode: a multiple of 8 bytes between 16 and 2^32 inclusive.</li></ul>
 * \param[out] output    The buffer holding the output data.
 *                  The output buffer's minimal length is 8 bytes shorter than \p in_len.
 * \param[out] out_len The number of bytes written to the output buffer. \c 0 on failure.
 *                  For KWP mode, the length could be up to 15 bytes shorter than \p in_len,
 *                  depending on how much padding was added to the data.
 * \param[in] out_size The capacity of the output buffer.
 *
 * \return          \c 0 on success.
 * \return          \c MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA for invalid input length.
 * \return          \c MBEDTLS_ERR_CIPHER_AUTH_FAILED for verification failure of the ciphertext.
 * \return          cipher-specific error code on failure of the underlying cipher.
 */
int mbedtls_nist_kw_unwrap(mbedtls_nist_kw_context *ctx, mbedtls_nist_kw_mode_t mode,
                           const unsigned char *input, size_t in_len,
                           unsigned char *output, size_t *out_len, size_t out_size);


#if defined(MBEDTLS_SELF_TEST) && defined(MBEDTLS_AES_C)
/**
 * \brief          The key wrapping checkup routine.
 *
 * \return         \c 0 on success.
 * \return         \c 1 on failure.
 */
int mbedtls_nist_kw_self_test(int verbose);
#endif /* MBEDTLS_SELF_TEST && MBEDTLS_AES_C */

#ifdef __cplusplus
}
#endif

#endif /* MBEDTLS_NIST_KW_H */