Add files to eliminate HAL dependency, build/compile pass
Signed-off-by: Bohdan Kovalchuk <bohd@cypress.com>
Signed-off-by: Roman Okhrimenko <roman.okhrimenko@cypress.com>
diff --git a/boot/cypress/platforms/cycfg_pins.h b/boot/cypress/platforms/cycfg_pins.h
new file mode 100644
index 0000000..c214826
--- /dev/null
+++ b/boot/cypress/platforms/cycfg_pins.h
@@ -0,0 +1,113 @@
+/*******************************************************************************
+* File Name: cycfg_pins.h
+*
+* Description:
+* Pin configuration
+* This file was automatically generated and should not be modified.
+* Device Configurator: 2.0.0.1483
+* Device Support Library (../../../psoc6pdl): 1.3.1.1499
+*
+********************************************************************************
+* Copyright 2017-2019 Cypress Semiconductor Corporation
+* SPDX-License-Identifier: Apache-2.0
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+* http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+********************************************************************************/
+
+#if !defined(CYCFG_PINS_H)
+#define CYCFG_PINS_H
+
+#include "cy_gpio.h"
+#if defined (CY_USING_HAL)
+ #include "cyhal_hwmgr.h"
+#endif //defined (CY_USING_HAL)
+#include "cycfg_routing.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+#define CYBSP_UART_RX_ENABLED 1U
+#define CYBSP_UART_RX_PORT GPIO_PRT5
+#define CYBSP_UART_RX_PORT_NUM 5U
+#define CYBSP_UART_RX_PIN 0U
+#define CYBSP_UART_RX_NUM 0U
+#define CYBSP_UART_RX_DRIVEMODE CY_GPIO_DM_HIGHZ
+#define CYBSP_UART_RX_INIT_DRIVESTATE 1
+#ifndef ioss_0_port_5_pin_0_HSIOM
+ #define ioss_0_port_5_pin_0_HSIOM HSIOM_SEL_GPIO
+#endif
+#define CYBSP_UART_RX_HSIOM ioss_0_port_5_pin_0_HSIOM
+#define CYBSP_UART_RX_IRQ ioss_interrupts_gpio_5_IRQn
+#if defined (CY_USING_HAL)
+ #define CYBSP_UART_RX_HAL_PORT_PIN P5_0
+#endif //defined (CY_USING_HAL)
+#if defined (CY_USING_HAL)
+ #define CYBSP_UART_RX_HAL_IRQ CYHAL_GPIO_IRQ_NONE
+#endif //defined (CY_USING_HAL)
+#if defined (CY_USING_HAL)
+ #define CYBSP_UART_RX_HAL_DIR CYHAL_GPIO_DIR_INPUT
+#endif //defined (CY_USING_HAL)
+#if defined (CY_USING_HAL)
+ #define CYBSP_UART_RX_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_NONE
+#endif //defined (CY_USING_HAL)
+#define CYBSP_UART_TX_ENABLED 1U
+#define CYBSP_UART_TX_PORT GPIO_PRT5
+#define CYBSP_UART_TX_PORT_NUM 5U
+#define CYBSP_UART_TX_PIN 1U
+#define CYBSP_UART_TX_NUM 1U
+#define CYBSP_UART_TX_DRIVEMODE CY_GPIO_DM_STRONG_IN_OFF
+#define CYBSP_UART_TX_INIT_DRIVESTATE 1
+#ifndef ioss_0_port_5_pin_1_HSIOM
+ #define ioss_0_port_5_pin_1_HSIOM HSIOM_SEL_GPIO
+#endif
+#define CYBSP_UART_TX_HSIOM ioss_0_port_5_pin_1_HSIOM
+#define CYBSP_UART_TX_IRQ ioss_interrupts_gpio_5_IRQn
+#if defined (CY_USING_HAL)
+ #define CYBSP_UART_TX_HAL_PORT_PIN P5_1
+#endif //defined (CY_USING_HAL)
+#if defined (CY_USING_HAL)
+ #define CYBSP_UART_TX_HAL_IRQ CYHAL_GPIO_IRQ_NONE
+#endif //defined (CY_USING_HAL)
+#if defined (CY_USING_HAL)
+ #define CYBSP_UART_TX_HAL_DIR CYHAL_GPIO_DIR_OUTPUT
+#endif //defined (CY_USING_HAL)
+#if defined (CY_USING_HAL)
+ #define CYBSP_UART_TX_HAL_DRIVEMODE CYHAL_GPIO_DRIVE_STRONG
+#endif //defined (CY_USING_HAL)
+
+extern const cy_stc_gpio_pin_config_t CYBSP_WCO_IN_config;
+#if defined (CY_USING_HAL)
+ extern const cyhal_resource_inst_t CYBSP_WCO_IN_obj;
+#endif //defined (CY_USING_HAL)
+extern const cy_stc_gpio_pin_config_t CYBSP_WCO_OUT_config;
+#if defined (CY_USING_HAL)
+ extern const cyhal_resource_inst_t CYBSP_WCO_OUT_obj;
+#endif //defined (CY_USING_HAL)
+extern const cy_stc_gpio_pin_config_t CYBSP_UART_RX_config;
+#if defined (CY_USING_HAL)
+ extern const cyhal_resource_inst_t CYBSP_UART_RX_obj;
+#endif //defined (CY_USING_HAL)
+extern const cy_stc_gpio_pin_config_t CYBSP_UART_TX_config;
+#if defined (CY_USING_HAL)
+ extern const cyhal_resource_inst_t CYBSP_UART_TX_obj;
+#endif //defined (CY_USING_HAL)
+
+void init_cycfg_pins(void);
+
+#if defined(__cplusplus)
+}
+#endif
+
+
+#endif /* CYCFG_PINS_H */